| # Copyright (c) 1995, 1996 Cygnus Support |
| # |
| # The authors hereby grant permission to use, copy, modify, distribute, |
| # and license this software and its documentation for any purpose, provided |
| # that existing copyright notices are retained in all copies and that this |
| # notice is included verbatim in any distributions. No written agreement, |
| # license, or royalty fee is required for any of the authorized uses. |
| # Modifications to this software may be copyrighted by their authors |
| # and need not follow the licensing terms described here, provided that |
| # the new terms are clearly indicated on the first page of each file where |
| # they apply. |
| # |
| DESTDIR = |
| VPATH = @srcdir@ |
| srcdir = @srcdir@ |
| objdir = . |
| srcroot = $(srcdir)/../.. |
| objroot = $(objdir)/../.. |
| |
| prefix = @prefix@ |
| exec_prefix = @exec_prefix@ |
| |
| host_alias = @host_alias@ |
| target_alias = @target_alias@ |
| |
| bindir = @bindir@ |
| libdir = @libdir@ |
| tooldir = $(exec_prefix)/$(target_alias) |
| |
| # Multilib support variables. |
| # TOP is used instead of MULTI{BUILD,SRC}TOP. |
| MULTIDIRS = |
| MULTISUBDIR = |
| MULTIDO = true |
| MULTICLEAN = true |
| |
| INSTALL = @INSTALL@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| |
| SHELL = /bin/sh |
| |
| CC = @CC@ |
| |
| AS = @AS@ |
| AR = @AR@ |
| LD = @LD@ |
| RANLIB = @RANLIB@ |
| |
| OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ |
| then echo ${objroot}/../binutils/objdump ; \ |
| else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` |
| OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ |
| then echo ${objroot}/../binutils/objcopy ; \ |
| else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` |
| |
| SCRIPTS = w89k op50n |
| CRT0 = crt0.o |
| OBJS = close.o fstat.o getpid.o isatty.o kill.o \ |
| lseek.o open.o print.o putnum.o read.o sbrk.o stat.o \ |
| unlink.o write.o hp-milli.o |
| |
| CFLAGS = -g |
| # ARFLAGS = rv |
| |
| # |
| # here's all the Oki OP50N target stuff |
| # |
| OKI_LDFLAGS= -L${srcdir} -Top50n.ld $(LDFLAGS_FOR_TARGET) -Ttext 40000 -Map oki.map |
| OKI_BSP= libop50n.a |
| OKI_OBJS= op50nled.o op50n-io.o |
| |
| # |
| # here's all the WinBind W89k target stuff |
| # |
| WEC_LDFLAGS= -L${srcdir} -Tw89k.ld $(LDFLAGS_FOR_TARGET) -Ttext 100000 -Map wec.map |
| WEC_BSP= libw89k.a |
| WEC_OBJS= w89k-io.o |
| |
| # Host specific makefile fragment comes in here. |
| @host_makefile_frag@ |
| |
| # |
| # build a test program for each target board. Just trying to get |
| # it to link is a good test, so we ignore all the errors for now. |
| # |
| |
| all: ${CRT0} ${OKI_BSP} ${WEC_BSP} |
| |
| test: ${CRT0} test.o ${OKI_BSP} ${WEC_BSP} |
| @for script in ${SCRIPTS}; do \ |
| echo Building $@ for $${script}... ; \ |
| ${CC} $(CFLAGS_FOR_TARGET) $(INCLUDES) -L${objdir} \ |
| -m$${script} test.o -L. \ |
| -o $${script}-test.x $(LIBS_FOR_TARGET) ; \ |
| if [ -s $${script}-test.x ] ; then \ |
| echo "Making an srecord for $${script}-test.x..." ; \ |
| ${OBJCOPY} -O srec $${script}-test.x $${script}-test.srec ; \ |
| echo "Making an disassembly file for $${script}-test.x..." ; \ |
| rm -f $${script}-test.dis ; \ |
| ${OBJDUMP} -d $${script}-test.x > $${script}-test.dis ; \ |
| else \ |
| rm $${script}-test.x ; \ |
| echo "WARNING: $${script}-test didn't build." ; \ |
| fi ; \ |
| done |
| |
| # |
| # here's where we build the board support packages for each target |
| # |
| ${OKI_BSP}: $(OBJS) ${OKI_OBJS} |
| ${AR} ${ARFLAGS} $@ $(OBJS) ${OKI_OBJS} |
| ${RANLIB} $@ |
| |
| ${WEC_BSP}: $(OBJS) ${WEC_OBJS} |
| ${AR} ${ARFLAGS} $@ $(OBJS) ${WEC_OBJS} |
| ${RANLIB} $@ |
| |
| op50n-test.x: test.o ${srcdir}/test.c ${OKI_BSP} ${WEC_BSP} |
| w89k-test.x: test.o ${srcdir}/test.c ${OKI_BSP} ${WEC_BSP} |
| |
| doc: |
| |
| clean mostlyclean: |
| rm -f a.out core *.i *~ *.o *-test *.srec *.dis *.map *.x |
| |
| distclean maintainer-clean realclean: clean |
| rm -f Makefile config.cache config.log config.status |
| |
| .PHONY: install info install-info clean-info |
| install: |
| $(INSTALL_PROGRAM) $(CRT0) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(CRT0) |
| # install Oki stuff |
| $(INSTALL_PROGRAM) $(OKI_BSP) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(OKI_BSP) |
| $(INSTALL_DATA) ${srcdir}/op50n.ld $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/op50n.ld |
| # install WinBond stuff |
| $(INSTALL_PROGRAM) $(WEC_BSP) $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$(WEC_BSP) |
| $(INSTALL_DATA) ${srcdir}/w89k.ld $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/w89k.ld |
| |
| info: |
| install-info: |
| clean-info: |
| |
| test.o: ${srcdir}/test.c |
| ${CRT0}:${srcdir}/crt0.S |
| op50n-io.o: ${srcdir}/op50n-io.S |
| op50nled.o: ${srcdir}/op50nled.c |
| |
| # target specific makefile fragment comes in here. |
| @target_makefile_frag@ |
| |
| Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@ |
| $(SHELL) config.status |
| |
| config.status: configure |
| $(SHELL) config.status --recheck |