| // |
| // Copyright (c) 2012-2014 The ANGLE Project Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| // |
| |
| // Renderer11.cpp: Implements a back-end specific class for the D3D11 renderer. |
| |
| #include "libANGLE/renderer/d3d/d3d11/Renderer11.h" |
| |
| #include <EGL/eglext.h> |
| #include <versionhelpers.h> |
| #include <sstream> |
| |
| #include "common/tls.h" |
| #include "common/utilities.h" |
| #include "libANGLE/Buffer.h" |
| #include "libANGLE/Context.h" |
| #include "libANGLE/Display.h" |
| #include "libANGLE/Framebuffer.h" |
| #include "libANGLE/FramebufferAttachment.h" |
| #include "libANGLE/Program.h" |
| #include "libANGLE/State.h" |
| #include "libANGLE/Surface.h" |
| #include "libANGLE/formatutils.h" |
| #include "libANGLE/histogram_macros.h" |
| #include "libANGLE/renderer/d3d/CompilerD3D.h" |
| #include "libANGLE/renderer/d3d/DeviceD3D.h" |
| #include "libANGLE/renderer/d3d/DisplayD3D.h" |
| #include "libANGLE/renderer/d3d/FramebufferD3D.h" |
| #include "libANGLE/renderer/d3d/IndexDataManager.h" |
| #include "libANGLE/renderer/d3d/ProgramD3D.h" |
| #include "libANGLE/renderer/d3d/RenderbufferD3D.h" |
| #include "libANGLE/renderer/d3d/ShaderD3D.h" |
| #include "libANGLE/renderer/d3d/SurfaceD3D.h" |
| #include "libANGLE/renderer/d3d/TextureD3D.h" |
| #include "libANGLE/renderer/d3d/VertexDataManager.h" |
| #include "libANGLE/renderer/d3d/d3d11/Blit11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Buffer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Clear11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Context11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Fence11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Framebuffer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Image11.h" |
| #include "libANGLE/renderer/d3d/d3d11/IndexBuffer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/PixelTransfer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Query11.h" |
| #include "libANGLE/renderer/d3d/d3d11/RenderTarget11.h" |
| #include "libANGLE/renderer/d3d/d3d11/ShaderExecutable11.h" |
| #include "libANGLE/renderer/d3d/d3d11/StreamProducerNV12.h" |
| #include "libANGLE/renderer/d3d/d3d11/SwapChain11.h" |
| #include "libANGLE/renderer/d3d/d3d11/TextureStorage11.h" |
| #include "libANGLE/renderer/d3d/d3d11/TransformFeedback11.h" |
| #include "libANGLE/renderer/d3d/d3d11/Trim11.h" |
| #include "libANGLE/renderer/d3d/d3d11/VertexArray11.h" |
| #include "libANGLE/renderer/d3d/d3d11/VertexBuffer11.h" |
| #include "libANGLE/renderer/d3d/d3d11/dxgi_support_table.h" |
| #include "libANGLE/renderer/d3d/d3d11/formatutils11.h" |
| #include "libANGLE/renderer/d3d/d3d11/renderer11_utils.h" |
| #include "libANGLE/renderer/d3d/d3d11/texture_format_table.h" |
| #include "libANGLE/renderer/renderer_utils.h" |
| #include "third_party/trace_event/trace_event.h" |
| |
| #ifdef ANGLE_ENABLE_WINDOWS_STORE |
| #include "libANGLE/renderer/d3d/d3d11/winrt/NativeWindow11WinRT.h" |
| #else |
| #include "libANGLE/renderer/d3d/d3d11/win32/NativeWindow11Win32.h" |
| #endif |
| |
| // Include the D3D9 debug annotator header for use by the desktop D3D11 renderer |
| // because the D3D11 interface method ID3DUserDefinedAnnotation::GetStatus |
| // doesn't work with the Graphics Diagnostics tools in Visual Studio 2013. |
| #ifdef ANGLE_ENABLE_D3D9 |
| #include "libANGLE/renderer/d3d/d3d9/DebugAnnotator9.h" |
| #endif |
| |
| // Enable ANGLE_SKIP_DXGI_1_2_CHECK if there is not a possibility of using cross-process |
| // HWNDs or the Windows 7 Platform Update (KB2670838) is expected to be installed. |
| #ifndef ANGLE_SKIP_DXGI_1_2_CHECK |
| #define ANGLE_SKIP_DXGI_1_2_CHECK 0 |
| #endif |
| |
| #ifdef _DEBUG |
| // this flag enables suppressing some spurious warnings that pop up in certain WebGL samples |
| // and conformance tests. to enable all warnings, remove this define. |
| #define ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS 1 |
| #endif |
| |
| namespace rx |
| { |
| |
| namespace |
| { |
| |
| enum |
| { |
| MAX_TEXTURE_IMAGE_UNITS_VTF_SM4 = 16 |
| }; |
| |
| enum ANGLEFeatureLevel |
| { |
| ANGLE_FEATURE_LEVEL_INVALID, |
| ANGLE_FEATURE_LEVEL_9_3, |
| ANGLE_FEATURE_LEVEL_10_0, |
| ANGLE_FEATURE_LEVEL_10_1, |
| ANGLE_FEATURE_LEVEL_11_0, |
| ANGLE_FEATURE_LEVEL_11_1, |
| NUM_ANGLE_FEATURE_LEVELS |
| }; |
| |
| ANGLEFeatureLevel GetANGLEFeatureLevel(D3D_FEATURE_LEVEL d3dFeatureLevel) |
| { |
| switch (d3dFeatureLevel) |
| { |
| case D3D_FEATURE_LEVEL_9_3: |
| return ANGLE_FEATURE_LEVEL_9_3; |
| case D3D_FEATURE_LEVEL_10_0: |
| return ANGLE_FEATURE_LEVEL_10_0; |
| case D3D_FEATURE_LEVEL_10_1: |
| return ANGLE_FEATURE_LEVEL_10_1; |
| case D3D_FEATURE_LEVEL_11_0: |
| return ANGLE_FEATURE_LEVEL_11_0; |
| // Note: we don't ever request a 11_1 device, because this gives |
| // an E_INVALIDARG error on systems that don't have the platform update. |
| case D3D_FEATURE_LEVEL_11_1: |
| return ANGLE_FEATURE_LEVEL_11_1; |
| default: |
| return ANGLE_FEATURE_LEVEL_INVALID; |
| } |
| } |
| |
| void SetLineLoopIndices(GLuint *dest, size_t count) |
| { |
| for (size_t i = 0; i < count; i++) |
| { |
| dest[i] = static_cast<GLuint>(i); |
| } |
| dest[count] = 0; |
| } |
| |
| template <typename T> |
| void CopyLineLoopIndices(const void *indices, GLuint *dest, size_t count) |
| { |
| const T *srcPtr = static_cast<const T *>(indices); |
| for (size_t i = 0; i < count; ++i) |
| { |
| dest[i] = static_cast<GLuint>(srcPtr[i]); |
| } |
| dest[count] = static_cast<GLuint>(srcPtr[0]); |
| } |
| |
| void SetTriangleFanIndices(GLuint *destPtr, size_t numTris) |
| { |
| for (size_t i = 0; i < numTris; i++) |
| { |
| destPtr[i * 3 + 0] = 0; |
| destPtr[i * 3 + 1] = static_cast<GLuint>(i) + 1; |
| destPtr[i * 3 + 2] = static_cast<GLuint>(i) + 2; |
| } |
| } |
| |
| template <typename T> |
| void CopyLineLoopIndicesWithRestart(const void *indices, |
| size_t count, |
| GLenum indexType, |
| std::vector<GLuint> *bufferOut) |
| { |
| GLuint restartIndex = gl::GetPrimitiveRestartIndex(indexType); |
| GLuint d3dRestartIndex = static_cast<GLuint>(d3d11::GetPrimitiveRestartIndex()); |
| const T *srcPtr = static_cast<const T *>(indices); |
| Optional<GLuint> currentLoopStart; |
| |
| bufferOut->clear(); |
| |
| for (size_t indexIdx = 0; indexIdx < count; ++indexIdx) |
| { |
| GLuint value = static_cast<GLuint>(srcPtr[indexIdx]); |
| |
| if (value == restartIndex) |
| { |
| if (currentLoopStart.valid()) |
| { |
| bufferOut->push_back(currentLoopStart.value()); |
| bufferOut->push_back(d3dRestartIndex); |
| currentLoopStart.reset(); |
| } |
| } |
| else |
| { |
| bufferOut->push_back(value); |
| if (!currentLoopStart.valid()) |
| { |
| currentLoopStart = value; |
| } |
| } |
| } |
| |
| if (currentLoopStart.valid()) |
| { |
| bufferOut->push_back(currentLoopStart.value()); |
| } |
| } |
| |
| void GetLineLoopIndices(const void *indices, |
| GLenum indexType, |
| GLuint count, |
| bool usePrimitiveRestartFixedIndex, |
| std::vector<GLuint> *bufferOut) |
| { |
| if (indexType != GL_NONE && usePrimitiveRestartFixedIndex) |
| { |
| switch (indexType) |
| { |
| case GL_UNSIGNED_BYTE: |
| CopyLineLoopIndicesWithRestart<GLubyte>(indices, count, indexType, bufferOut); |
| break; |
| case GL_UNSIGNED_SHORT: |
| CopyLineLoopIndicesWithRestart<GLushort>(indices, count, indexType, bufferOut); |
| break; |
| case GL_UNSIGNED_INT: |
| CopyLineLoopIndicesWithRestart<GLuint>(indices, count, indexType, bufferOut); |
| break; |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| return; |
| } |
| |
| // For non-primitive-restart draws, the index count is static. |
| bufferOut->resize(static_cast<size_t>(count) + 1); |
| |
| switch (indexType) |
| { |
| // Non-indexed draw |
| case GL_NONE: |
| SetLineLoopIndices(&(*bufferOut)[0], count); |
| break; |
| case GL_UNSIGNED_BYTE: |
| CopyLineLoopIndices<GLubyte>(indices, &(*bufferOut)[0], count); |
| break; |
| case GL_UNSIGNED_SHORT: |
| CopyLineLoopIndices<GLushort>(indices, &(*bufferOut)[0], count); |
| break; |
| case GL_UNSIGNED_INT: |
| CopyLineLoopIndices<GLuint>(indices, &(*bufferOut)[0], count); |
| break; |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| } |
| |
| template <typename T> |
| void CopyTriangleFanIndices(const void *indices, GLuint *destPtr, size_t numTris) |
| { |
| const T *srcPtr = static_cast<const T *>(indices); |
| |
| for (size_t i = 0; i < numTris; i++) |
| { |
| destPtr[i * 3 + 0] = static_cast<GLuint>(srcPtr[0]); |
| destPtr[i * 3 + 1] = static_cast<GLuint>(srcPtr[i + 1]); |
| destPtr[i * 3 + 2] = static_cast<GLuint>(srcPtr[i + 2]); |
| } |
| } |
| |
| template <typename T> |
| void CopyTriangleFanIndicesWithRestart(const void *indices, |
| GLuint indexCount, |
| GLenum indexType, |
| std::vector<GLuint> *bufferOut) |
| { |
| GLuint restartIndex = gl::GetPrimitiveRestartIndex(indexType); |
| GLuint d3dRestartIndex = gl::GetPrimitiveRestartIndex(GL_UNSIGNED_INT); |
| const T *srcPtr = static_cast<const T *>(indices); |
| Optional<GLuint> vertexA; |
| Optional<GLuint> vertexB; |
| |
| bufferOut->clear(); |
| |
| for (size_t indexIdx = 0; indexIdx < indexCount; ++indexIdx) |
| { |
| GLuint value = static_cast<GLuint>(srcPtr[indexIdx]); |
| |
| if (value == restartIndex) |
| { |
| bufferOut->push_back(d3dRestartIndex); |
| vertexA.reset(); |
| vertexB.reset(); |
| } |
| else |
| { |
| if (!vertexA.valid()) |
| { |
| vertexA = value; |
| } |
| else if (!vertexB.valid()) |
| { |
| vertexB = value; |
| } |
| else |
| { |
| bufferOut->push_back(vertexA.value()); |
| bufferOut->push_back(vertexB.value()); |
| bufferOut->push_back(value); |
| vertexB = value; |
| } |
| } |
| } |
| } |
| |
| void GetTriFanIndices(const void *indices, |
| GLenum indexType, |
| GLuint count, |
| bool usePrimitiveRestartFixedIndex, |
| std::vector<GLuint> *bufferOut) |
| { |
| if (indexType != GL_NONE && usePrimitiveRestartFixedIndex) |
| { |
| switch (indexType) |
| { |
| case GL_UNSIGNED_BYTE: |
| CopyTriangleFanIndicesWithRestart<GLubyte>(indices, count, indexType, bufferOut); |
| break; |
| case GL_UNSIGNED_SHORT: |
| CopyTriangleFanIndicesWithRestart<GLushort>(indices, count, indexType, bufferOut); |
| break; |
| case GL_UNSIGNED_INT: |
| CopyTriangleFanIndicesWithRestart<GLuint>(indices, count, indexType, bufferOut); |
| break; |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| return; |
| } |
| |
| // For non-primitive-restart draws, the index count is static. |
| GLuint numTris = count - 2; |
| bufferOut->resize(numTris * 3); |
| |
| switch (indexType) |
| { |
| // Non-indexed draw |
| case GL_NONE: |
| SetTriangleFanIndices(&(*bufferOut)[0], numTris); |
| break; |
| case GL_UNSIGNED_BYTE: |
| CopyTriangleFanIndices<GLubyte>(indices, &(*bufferOut)[0], numTris); |
| break; |
| case GL_UNSIGNED_SHORT: |
| CopyTriangleFanIndices<GLushort>(indices, &(*bufferOut)[0], numTris); |
| break; |
| case GL_UNSIGNED_INT: |
| CopyTriangleFanIndices<GLuint>(indices, &(*bufferOut)[0], numTris); |
| break; |
| default: |
| UNREACHABLE(); |
| break; |
| } |
| } |
| |
| bool DrawCallNeedsTranslation(const gl::Context *context, GLenum mode, GLenum type) |
| { |
| const auto &glState = context->getGLState(); |
| const auto &vertexArray = glState.getVertexArray(); |
| auto *vertexArray11 = GetImplAs<VertexArray11>(vertexArray); |
| // Direct drawing doesn't support dynamic attribute storage since it needs the first and count |
| // to translate when applyVertexBuffer. GL_LINE_LOOP and GL_TRIANGLE_FAN are not supported |
| // either since we need to simulate them in D3D. |
| if (vertexArray11->hasDynamicAttrib(context) || mode == GL_LINE_LOOP || mode == GL_TRIANGLE_FAN) |
| { |
| return true; |
| } |
| |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(glState.getProgram()); |
| if (InstancedPointSpritesActive(programD3D, mode)) |
| { |
| return true; |
| } |
| |
| if (type != GL_NONE) |
| { |
| // Only non-streaming index data can be directly used to draw since they don't |
| // need the indices and count informations. |
| return IndexDataManager::IsStreamingIndexData(context, type, RENDERER_D3D11); |
| } |
| return false; |
| } |
| |
| int GetAdjustedInstanceCount(const gl::Program *program, int instanceCount) |
| { |
| if (!program->usesMultiview()) |
| { |
| return instanceCount; |
| } |
| if (instanceCount == 0) |
| { |
| return program->getNumViews(); |
| } |
| return program->getNumViews() * instanceCount; |
| } |
| |
| const uint32_t ScratchMemoryBufferLifetime = 1000; |
| |
| } // anonymous namespace |
| |
| Renderer11::Renderer11(egl::Display *display) |
| : RendererD3D(display), |
| mCreateDebugDevice(false), |
| mStateCache(), |
| mStateManager(this), |
| mLastHistogramUpdateTime( |
| ANGLEPlatformCurrent()->monotonicallyIncreasingTime(ANGLEPlatformCurrent())), |
| mDebug(nullptr), |
| mScratchMemoryBuffer(ScratchMemoryBufferLifetime), |
| mAnnotator(nullptr) |
| { |
| mLineLoopIB = nullptr; |
| mTriangleFanIB = nullptr; |
| |
| mBlit = nullptr; |
| mPixelTransfer = nullptr; |
| |
| mClear = nullptr; |
| |
| mTrim = nullptr; |
| |
| mRenderer11DeviceCaps.supportsClearView = false; |
| mRenderer11DeviceCaps.supportsConstantBufferOffsets = false; |
| mRenderer11DeviceCaps.supportsDXGI1_2 = false; |
| mRenderer11DeviceCaps.B5G6R5support = 0; |
| mRenderer11DeviceCaps.B4G4R4A4support = 0; |
| mRenderer11DeviceCaps.B5G5R5A1support = 0; |
| |
| mD3d11Module = nullptr; |
| mDxgiModule = nullptr; |
| mDCompModule = nullptr; |
| mCreatedWithDeviceEXT = false; |
| mEGLDevice = nullptr; |
| |
| mDevice = nullptr; |
| mDeviceContext = nullptr; |
| mDeviceContext1 = nullptr; |
| mDxgiAdapter = nullptr; |
| mDxgiFactory = nullptr; |
| |
| mAppliedTFObject = angle::DirtyPointer; |
| |
| ZeroMemory(&mAdapterDescription, sizeof(mAdapterDescription)); |
| |
| if (mDisplay->getPlatform() == EGL_PLATFORM_ANGLE_ANGLE) |
| { |
| const auto &attributes = mDisplay->getAttributeMap(); |
| |
| EGLint requestedMajorVersion = static_cast<EGLint>( |
| attributes.get(EGL_PLATFORM_ANGLE_MAX_VERSION_MAJOR_ANGLE, EGL_DONT_CARE)); |
| EGLint requestedMinorVersion = static_cast<EGLint>( |
| attributes.get(EGL_PLATFORM_ANGLE_MAX_VERSION_MINOR_ANGLE, EGL_DONT_CARE)); |
| |
| if (requestedMajorVersion == EGL_DONT_CARE || requestedMajorVersion >= 11) |
| { |
| if (requestedMinorVersion == EGL_DONT_CARE || requestedMinorVersion >= 0) |
| { |
| mAvailableFeatureLevels.push_back(D3D_FEATURE_LEVEL_11_0); |
| } |
| } |
| |
| if (requestedMajorVersion == EGL_DONT_CARE || requestedMajorVersion >= 10) |
| { |
| if (requestedMinorVersion == EGL_DONT_CARE || requestedMinorVersion >= 1) |
| { |
| mAvailableFeatureLevels.push_back(D3D_FEATURE_LEVEL_10_1); |
| } |
| if (requestedMinorVersion == EGL_DONT_CARE || requestedMinorVersion >= 0) |
| { |
| mAvailableFeatureLevels.push_back(D3D_FEATURE_LEVEL_10_0); |
| } |
| } |
| |
| if (requestedMajorVersion == 9 && requestedMinorVersion == 3) |
| { |
| mAvailableFeatureLevels.push_back(D3D_FEATURE_LEVEL_9_3); |
| } |
| |
| EGLint requestedDeviceType = static_cast<EGLint>(attributes.get( |
| EGL_PLATFORM_ANGLE_DEVICE_TYPE_ANGLE, EGL_PLATFORM_ANGLE_DEVICE_TYPE_HARDWARE_ANGLE)); |
| switch (requestedDeviceType) |
| { |
| case EGL_PLATFORM_ANGLE_DEVICE_TYPE_HARDWARE_ANGLE: |
| mRequestedDriverType = D3D_DRIVER_TYPE_HARDWARE; |
| break; |
| |
| case EGL_PLATFORM_ANGLE_DEVICE_TYPE_WARP_ANGLE: |
| mRequestedDriverType = D3D_DRIVER_TYPE_WARP; |
| break; |
| |
| case EGL_PLATFORM_ANGLE_DEVICE_TYPE_REFERENCE_ANGLE: |
| mRequestedDriverType = D3D_DRIVER_TYPE_REFERENCE; |
| break; |
| |
| case EGL_PLATFORM_ANGLE_DEVICE_TYPE_NULL_ANGLE: |
| mRequestedDriverType = D3D_DRIVER_TYPE_NULL; |
| break; |
| |
| default: |
| UNREACHABLE(); |
| } |
| |
| const EGLenum presentPath = static_cast<EGLenum>(attributes.get( |
| EGL_EXPERIMENTAL_PRESENT_PATH_ANGLE, EGL_EXPERIMENTAL_PRESENT_PATH_COPY_ANGLE)); |
| mPresentPathFastEnabled = (presentPath == EGL_EXPERIMENTAL_PRESENT_PATH_FAST_ANGLE); |
| |
| mCreateDebugDevice = ShouldUseDebugLayers(attributes); |
| } |
| else if (display->getPlatform() == EGL_PLATFORM_DEVICE_EXT) |
| { |
| mEGLDevice = GetImplAs<DeviceD3D>(display->getDevice()); |
| ASSERT(mEGLDevice != nullptr); |
| mCreatedWithDeviceEXT = true; |
| |
| // Also set EGL_PLATFORM_ANGLE_ANGLE variables, in case they're used elsewhere in ANGLE |
| // mAvailableFeatureLevels defaults to empty |
| mRequestedDriverType = D3D_DRIVER_TYPE_UNKNOWN; |
| mPresentPathFastEnabled = false; |
| } |
| |
| // The D3D11 renderer must choose the D3D9 debug annotator because the D3D11 interface |
| // method ID3DUserDefinedAnnotation::GetStatus on desktop builds doesn't work with the Graphics |
| // Diagnostics tools in Visual Studio 2013. |
| // The D3D9 annotator works properly for both D3D11 and D3D9. |
| // Incorrect status reporting can cause ANGLE to log unnecessary debug events. |
| #ifdef ANGLE_ENABLE_D3D9 |
| mAnnotator = new DebugAnnotator9(); |
| #else |
| mAnnotator = new DebugAnnotator11(); |
| #endif |
| ASSERT(mAnnotator); |
| gl::InitializeDebugAnnotations(mAnnotator); |
| } |
| |
| Renderer11::~Renderer11() |
| { |
| release(); |
| } |
| |
| #ifndef __d3d11_1_h__ |
| #define D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET ((D3D11_MESSAGE_ID)3146081) |
| #endif |
| |
| egl::Error Renderer11::initialize() |
| { |
| HRESULT result = S_OK; |
| |
| ANGLE_TRY(initializeD3DDevice()); |
| |
| #if !defined(ANGLE_ENABLE_WINDOWS_STORE) |
| #if !ANGLE_SKIP_DXGI_1_2_CHECK |
| { |
| TRACE_EVENT0("gpu.angle", "Renderer11::initialize (DXGICheck)"); |
| // In order to create a swap chain for an HWND owned by another process, DXGI 1.2 is |
| // required. |
| // The easiest way to check is to query for a IDXGIDevice2. |
| bool requireDXGI1_2 = false; |
| HWND hwnd = WindowFromDC(mDisplay->getNativeDisplayId()); |
| if (hwnd) |
| { |
| DWORD currentProcessId = GetCurrentProcessId(); |
| DWORD wndProcessId; |
| GetWindowThreadProcessId(hwnd, &wndProcessId); |
| requireDXGI1_2 = (currentProcessId != wndProcessId); |
| } |
| else |
| { |
| requireDXGI1_2 = true; |
| } |
| |
| if (requireDXGI1_2) |
| { |
| IDXGIDevice2 *dxgiDevice2 = nullptr; |
| result = mDevice->QueryInterface(__uuidof(IDXGIDevice2), (void **)&dxgiDevice2); |
| if (FAILED(result)) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_INCOMPATIBLE_DXGI) |
| << "DXGI 1.2 required to present to HWNDs owned by another process."; |
| } |
| SafeRelease(dxgiDevice2); |
| } |
| } |
| #endif |
| #endif |
| |
| { |
| TRACE_EVENT0("gpu.angle", "Renderer11::initialize (ComQueries)"); |
| // Cast the DeviceContext to a DeviceContext1. |
| // This could fail on Windows 7 without the Platform Update. |
| // Don't error in this case- just don't use mDeviceContext1. |
| mDeviceContext1 = d3d11::DynamicCastComObject<ID3D11DeviceContext1>(mDeviceContext); |
| |
| IDXGIDevice *dxgiDevice = nullptr; |
| result = mDevice->QueryInterface(__uuidof(IDXGIDevice), (void **)&dxgiDevice); |
| |
| if (FAILED(result)) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_OTHER_ERROR) << "Could not query DXGI device."; |
| } |
| |
| result = dxgiDevice->GetParent(__uuidof(IDXGIAdapter), (void **)&mDxgiAdapter); |
| |
| if (FAILED(result)) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_OTHER_ERROR) |
| << "Could not retrieve DXGI adapter"; |
| } |
| |
| SafeRelease(dxgiDevice); |
| |
| IDXGIAdapter2 *dxgiAdapter2 = d3d11::DynamicCastComObject<IDXGIAdapter2>(mDxgiAdapter); |
| |
| // On D3D_FEATURE_LEVEL_9_*, IDXGIAdapter::GetDesc returns "Software Adapter" for the |
| // description string. |
| // If DXGI1.2 is available then IDXGIAdapter2::GetDesc2 can be used to get the actual |
| // hardware values. |
| if (mRenderer11DeviceCaps.featureLevel <= D3D_FEATURE_LEVEL_9_3 && dxgiAdapter2 != nullptr) |
| { |
| DXGI_ADAPTER_DESC2 adapterDesc2 = {}; |
| result = dxgiAdapter2->GetDesc2(&adapterDesc2); |
| if (SUCCEEDED(result)) |
| { |
| // Copy the contents of the DXGI_ADAPTER_DESC2 into mAdapterDescription (a |
| // DXGI_ADAPTER_DESC). |
| memcpy(mAdapterDescription.Description, adapterDesc2.Description, |
| sizeof(mAdapterDescription.Description)); |
| mAdapterDescription.VendorId = adapterDesc2.VendorId; |
| mAdapterDescription.DeviceId = adapterDesc2.DeviceId; |
| mAdapterDescription.SubSysId = adapterDesc2.SubSysId; |
| mAdapterDescription.Revision = adapterDesc2.Revision; |
| mAdapterDescription.DedicatedVideoMemory = adapterDesc2.DedicatedVideoMemory; |
| mAdapterDescription.DedicatedSystemMemory = adapterDesc2.DedicatedSystemMemory; |
| mAdapterDescription.SharedSystemMemory = adapterDesc2.SharedSystemMemory; |
| mAdapterDescription.AdapterLuid = adapterDesc2.AdapterLuid; |
| } |
| } |
| else |
| { |
| result = mDxgiAdapter->GetDesc(&mAdapterDescription); |
| } |
| |
| SafeRelease(dxgiAdapter2); |
| |
| if (FAILED(result)) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_OTHER_ERROR) |
| << "Could not read DXGI adaptor description."; |
| } |
| |
| memset(mDescription, 0, sizeof(mDescription)); |
| wcstombs(mDescription, mAdapterDescription.Description, sizeof(mDescription) - 1); |
| |
| result = mDxgiAdapter->GetParent(__uuidof(IDXGIFactory), (void **)&mDxgiFactory); |
| |
| if (!mDxgiFactory || FAILED(result)) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_OTHER_ERROR) |
| << "Could not create DXGI factory."; |
| } |
| } |
| |
| // Disable some spurious D3D11 debug warnings to prevent them from flooding the output log |
| #if defined(ANGLE_SUPPRESS_D3D11_HAZARD_WARNINGS) && defined(_DEBUG) |
| { |
| TRACE_EVENT0("gpu.angle", "Renderer11::initialize (HideWarnings)"); |
| ID3D11InfoQueue *infoQueue; |
| result = mDevice->QueryInterface(__uuidof(ID3D11InfoQueue), (void **)&infoQueue); |
| |
| if (SUCCEEDED(result)) |
| { |
| D3D11_MESSAGE_ID hideMessages[] = { |
| D3D11_MESSAGE_ID_DEVICE_DRAW_RENDERTARGETVIEW_NOT_SET}; |
| |
| D3D11_INFO_QUEUE_FILTER filter = {}; |
| filter.DenyList.NumIDs = static_cast<unsigned int>(ArraySize(hideMessages)); |
| filter.DenyList.pIDList = hideMessages; |
| |
| infoQueue->AddStorageFilterEntries(&filter); |
| SafeRelease(infoQueue); |
| } |
| } |
| #endif |
| |
| #if !defined(NDEBUG) |
| mDebug = d3d11::DynamicCastComObject<ID3D11Debug>(mDevice); |
| #endif |
| |
| ANGLE_TRY(initializeDevice()); |
| |
| return egl::NoError(); |
| } |
| |
| egl::Error Renderer11::initializeD3DDevice() |
| { |
| HRESULT result = S_OK; |
| |
| if (!mCreatedWithDeviceEXT) |
| { |
| #if !defined(ANGLE_ENABLE_WINDOWS_STORE) |
| PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = nullptr; |
| { |
| SCOPED_ANGLE_HISTOGRAM_TIMER("GPU.ANGLE.Renderer11InitializeDLLsMS"); |
| TRACE_EVENT0("gpu.angle", "Renderer11::initialize (Load DLLs)"); |
| mDxgiModule = LoadLibrary(TEXT("dxgi.dll")); |
| mD3d11Module = LoadLibrary(TEXT("d3d11.dll")); |
| mDCompModule = LoadLibrary(TEXT("dcomp.dll")); |
| |
| if (mD3d11Module == nullptr || mDxgiModule == nullptr) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_MISSING_DEP) |
| << "Could not load D3D11 or DXGI library."; |
| } |
| |
| // create the D3D11 device |
| ASSERT(mDevice == nullptr); |
| D3D11CreateDevice = reinterpret_cast<PFN_D3D11_CREATE_DEVICE>( |
| GetProcAddress(mD3d11Module, "D3D11CreateDevice")); |
| |
| if (D3D11CreateDevice == nullptr) |
| { |
| return egl::EglNotInitialized(D3D11_INIT_MISSING_DEP) |
| << "Could not retrieve D3D11CreateDevice address."; |
| } |
| } |
| #endif |
| |
| if (mCreateDebugDevice) |
| { |
| TRACE_EVENT0("gpu.angle", "D3D11CreateDevice (Debug)"); |
| result = D3D11CreateDevice(nullptr, mRequestedDriverType, nullptr, |
| D3D11_CREATE_DEVICE_DEBUG, mAvailableFeatureLevels.data(), |
| static_cast<unsigned int>(mAvailableFeatureLevels.size()), |
| D3D11_SDK_VERSION, &mDevice, |
| &(mRenderer11DeviceCaps.featureLevel), &mDeviceContext); |
| |
| if (!mDevice || FAILED(result)) |
| { |
| WARN() << "Failed creating Debug D3D11 device - falling back to release runtime."; |
| } |
| } |
| |
| if (!mDevice || FAILED(result)) |
| { |
| SCOPED_ANGLE_HISTOGRAM_TIMER("GPU.ANGLE.D3D11CreateDeviceMS"); |
| TRACE_EVENT0("gpu.angle", "D3D11CreateDevice"); |
| |
| result = D3D11CreateDevice( |
| nullptr, mRequestedDriverType, nullptr, 0, mAvailableFeatureLevels.data(), |
| static_cast<unsigned int>(mAvailableFeatureLevels.size()), D3D11_SDK_VERSION, |
| &mDevice, &(mRenderer11DeviceCaps.featureLevel), &mDeviceContext); |
| |
| // Cleanup done by destructor |
| if (!mDevice || FAILED(result)) |
| { |
| ANGLE_HISTOGRAM_SPARSE_SLOWLY("GPU.ANGLE.D3D11CreateDeviceError", |
| static_cast<int>(result)); |
| return egl::EglNotInitialized(D3D11_INIT_CREATEDEVICE_ERROR) |
| << "Could not create D3D11 device."; |
| } |
| } |
| } |
| else |
| { |
| // We should use the inputted D3D11 device instead |
| void *device = nullptr; |
| ANGLE_TRY(mEGLDevice->getDevice(&device)); |
| |
| ID3D11Device *d3dDevice = reinterpret_cast<ID3D11Device *>(device); |
| if (FAILED(d3dDevice->GetDeviceRemovedReason())) |
| { |
| return egl::EglNotInitialized() << "Inputted D3D11 device has been lost."; |
| } |
| |
| if (d3dDevice->GetFeatureLevel() < D3D_FEATURE_LEVEL_9_3) |
| { |
| return egl::EglNotInitialized() |
| << "Inputted D3D11 device must be Feature Level 9_3 or greater."; |
| } |
| |
| // The Renderer11 adds a ref to the inputted D3D11 device, like D3D11CreateDevice does. |
| mDevice = d3dDevice; |
| mDevice->AddRef(); |
| mDevice->GetImmediateContext(&mDeviceContext); |
| mRenderer11DeviceCaps.featureLevel = mDevice->GetFeatureLevel(); |
| } |
| |
| d3d11::SetDebugName(mDeviceContext, "DeviceContext"); |
| |
| return egl::NoError(); |
| } |
| |
| // do any one-time device initialization |
| // NOTE: this is also needed after a device lost/reset |
| // to reset the scene status and ensure the default states are reset. |
| egl::Error Renderer11::initializeDevice() |
| { |
| SCOPED_ANGLE_HISTOGRAM_TIMER("GPU.ANGLE.Renderer11InitializeDeviceMS"); |
| TRACE_EVENT0("gpu.angle", "Renderer11::initializeDevice"); |
| |
| populateRenderer11DeviceCaps(); |
| |
| mStateCache.clear(); |
| |
| ASSERT(!mBlit); |
| mBlit = new Blit11(this); |
| |
| ASSERT(!mClear); |
| mClear = new Clear11(this); |
| |
| const auto &attributes = mDisplay->getAttributeMap(); |
| // If automatic trim is enabled, DXGIDevice3::Trim( ) is called for the application |
| // automatically when an application is suspended by the OS. This feature is currently |
| // only supported for Windows Store applications. |
| EGLint enableAutoTrim = static_cast<EGLint>( |
| attributes.get(EGL_PLATFORM_ANGLE_ENABLE_AUTOMATIC_TRIM_ANGLE, EGL_FALSE)); |
| |
| if (enableAutoTrim == EGL_TRUE) |
| { |
| ASSERT(!mTrim); |
| mTrim = new Trim11(this); |
| } |
| |
| ASSERT(!mPixelTransfer); |
| mPixelTransfer = new PixelTransfer11(this); |
| |
| const gl::Caps &rendererCaps = getNativeCaps(); |
| |
| if (mStateManager.initialize(rendererCaps, getNativeExtensions()).isError()) |
| { |
| return egl::EglBadAlloc() << "Error initializing state manager."; |
| } |
| |
| // No context is available here, use the proxy context in the display. |
| markAllStateDirty(mDisplay->getProxyContext()); |
| |
| // Gather stats on DXGI and D3D feature level |
| ANGLE_HISTOGRAM_BOOLEAN("GPU.ANGLE.SupportsDXGI1_2", mRenderer11DeviceCaps.supportsDXGI1_2); |
| |
| ANGLEFeatureLevel angleFeatureLevel = GetANGLEFeatureLevel(mRenderer11DeviceCaps.featureLevel); |
| |
| // We don't actually request a 11_1 device, because of complications with the platform |
| // update. Instead we check if the mDeviceContext1 pointer cast succeeded. |
| // Note: we should support D3D11_0 always, but we aren't guaranteed to be at FL11_0 |
| // because the app can specify a lower version (such as 9_3) on Display creation. |
| if (mDeviceContext1 != nullptr) |
| { |
| angleFeatureLevel = ANGLE_FEATURE_LEVEL_11_1; |
| } |
| |
| ANGLE_HISTOGRAM_ENUMERATION("GPU.ANGLE.D3D11FeatureLevel", angleFeatureLevel, |
| NUM_ANGLE_FEATURE_LEVELS); |
| |
| return egl::NoError(); |
| } |
| |
| void Renderer11::populateRenderer11DeviceCaps() |
| { |
| HRESULT hr = S_OK; |
| |
| LARGE_INTEGER version; |
| hr = mDxgiAdapter->CheckInterfaceSupport(__uuidof(IDXGIDevice), &version); |
| if (FAILED(hr)) |
| { |
| mRenderer11DeviceCaps.driverVersion.reset(); |
| ERR() << "Error querying driver version from DXGI Adapter."; |
| } |
| else |
| { |
| mRenderer11DeviceCaps.driverVersion = version; |
| } |
| |
| if (mDeviceContext1) |
| { |
| D3D11_FEATURE_DATA_D3D11_OPTIONS d3d11Options; |
| HRESULT result = mDevice->CheckFeatureSupport(D3D11_FEATURE_D3D11_OPTIONS, &d3d11Options, |
| sizeof(D3D11_FEATURE_DATA_D3D11_OPTIONS)); |
| if (SUCCEEDED(result)) |
| { |
| mRenderer11DeviceCaps.supportsClearView = (d3d11Options.ClearView != FALSE); |
| mRenderer11DeviceCaps.supportsConstantBufferOffsets = |
| (d3d11Options.ConstantBufferOffsetting != FALSE); |
| } |
| } |
| |
| if (getWorkarounds().disableB5G6R5Support) |
| { |
| mRenderer11DeviceCaps.B5G6R5support = 0; |
| } |
| else |
| { |
| hr = mDevice->CheckFormatSupport(DXGI_FORMAT_B5G6R5_UNORM, |
| &(mRenderer11DeviceCaps.B5G6R5support)); |
| if (FAILED(hr)) |
| { |
| mRenderer11DeviceCaps.B5G6R5support = 0; |
| } |
| } |
| |
| hr = mDevice->CheckFormatSupport(DXGI_FORMAT_B4G4R4A4_UNORM, |
| &(mRenderer11DeviceCaps.B4G4R4A4support)); |
| if (FAILED(hr)) |
| { |
| mRenderer11DeviceCaps.B4G4R4A4support = 0; |
| } |
| |
| hr = mDevice->CheckFormatSupport(DXGI_FORMAT_B5G5R5A1_UNORM, |
| &(mRenderer11DeviceCaps.B5G5R5A1support)); |
| if (FAILED(hr)) |
| { |
| mRenderer11DeviceCaps.B5G5R5A1support = 0; |
| } |
| |
| IDXGIAdapter2 *dxgiAdapter2 = d3d11::DynamicCastComObject<IDXGIAdapter2>(mDxgiAdapter); |
| mRenderer11DeviceCaps.supportsDXGI1_2 = (dxgiAdapter2 != nullptr); |
| SafeRelease(dxgiAdapter2); |
| } |
| |
| gl::SupportedSampleSet Renderer11::generateSampleSetFromCaps( |
| const gl::TextureCaps &colorBufferFormatCaps, |
| const gl::TextureCaps &depthStencilBufferFormatCaps) const |
| { |
| gl::SupportedSampleSet sampleCounts; |
| |
| // Generate a new set from the set intersection of sample counts between the color and depth |
| // format caps. |
| std::set_intersection(colorBufferFormatCaps.sampleCounts.begin(), |
| colorBufferFormatCaps.sampleCounts.end(), |
| depthStencilBufferFormatCaps.sampleCounts.begin(), |
| depthStencilBufferFormatCaps.sampleCounts.end(), |
| std::inserter(sampleCounts, sampleCounts.begin())); |
| |
| // Format of GL_NONE results in no supported sample counts. |
| // Add back the color sample counts to the supported sample set. |
| if (depthStencilBufferFormatCaps.sampleCounts.empty()) |
| { |
| sampleCounts = colorBufferFormatCaps.sampleCounts; |
| } |
| else if (colorBufferFormatCaps.sampleCounts.empty()) |
| { |
| // Likewise, add back the depth sample counts to the supported sample set. |
| sampleCounts = depthStencilBufferFormatCaps.sampleCounts; |
| } |
| |
| // In EGL, no multisampling is 0, in D3D its 1, so if 1 exists, insert 0 for EGL to match. |
| if (sampleCounts.find(1) != sampleCounts.end()) |
| { |
| sampleCounts.insert(0); |
| } |
| |
| return sampleCounts; |
| } |
| |
| egl::ConfigSet Renderer11::generateConfigs() |
| { |
| std::vector<GLenum> colorBufferFormats; |
| |
| // 32-bit supported formats |
| colorBufferFormats.push_back(GL_BGRA8_EXT); |
| colorBufferFormats.push_back(GL_RGBA8_OES); |
| |
| // 24-bit supported formats |
| colorBufferFormats.push_back(GL_RGB8_OES); |
| |
| if (mRenderer11DeviceCaps.featureLevel >= D3D_FEATURE_LEVEL_10_0) |
| { |
| // Additional high bit depth formats added in D3D 10.0 |
| // https://msdn.microsoft.com/en-us/library/windows/desktop/bb173064.aspx |
| colorBufferFormats.push_back(GL_RGBA16F); |
| colorBufferFormats.push_back(GL_RGB10_A2); |
| } |
| |
| if (!mPresentPathFastEnabled) |
| { |
| // 16-bit supported formats |
| // These aren't valid D3D11 swapchain formats, so don't expose them as configs |
| // if present path fast is active |
| colorBufferFormats.push_back(GL_RGBA4); |
| colorBufferFormats.push_back(GL_RGB5_A1); |
| colorBufferFormats.push_back(GL_RGB565); |
| } |
| |
| static const GLenum depthStencilBufferFormats[] = { |
| GL_NONE, GL_DEPTH24_STENCIL8_OES, GL_DEPTH_COMPONENT16, GL_STENCIL_INDEX8, |
| }; |
| |
| const gl::Caps &rendererCaps = getNativeCaps(); |
| const gl::TextureCapsMap &rendererTextureCaps = getNativeTextureCaps(); |
| |
| const EGLint optimalSurfaceOrientation = |
| mPresentPathFastEnabled ? 0 : EGL_SURFACE_ORIENTATION_INVERT_Y_ANGLE; |
| |
| egl::ConfigSet configs; |
| for (GLenum colorBufferInternalFormat : colorBufferFormats) |
| { |
| const gl::TextureCaps &colorBufferFormatCaps = |
| rendererTextureCaps.get(colorBufferInternalFormat); |
| if (!colorBufferFormatCaps.renderable) |
| { |
| continue; |
| } |
| |
| for (GLenum depthStencilBufferInternalFormat : depthStencilBufferFormats) |
| { |
| const gl::TextureCaps &depthStencilBufferFormatCaps = |
| rendererTextureCaps.get(depthStencilBufferInternalFormat); |
| if (!depthStencilBufferFormatCaps.renderable && |
| depthStencilBufferInternalFormat != GL_NONE) |
| { |
| continue; |
| } |
| |
| const gl::InternalFormat &colorBufferFormatInfo = |
| gl::GetSizedInternalFormatInfo(colorBufferInternalFormat); |
| const gl::InternalFormat &depthStencilBufferFormatInfo = |
| gl::GetSizedInternalFormatInfo(depthStencilBufferInternalFormat); |
| const gl::Version &maxVersion = getMaxSupportedESVersion(); |
| |
| const gl::SupportedSampleSet sampleCounts = |
| generateSampleSetFromCaps(colorBufferFormatCaps, depthStencilBufferFormatCaps); |
| |
| for (GLuint sampleCount : sampleCounts) |
| { |
| egl::Config config; |
| config.renderTargetFormat = colorBufferInternalFormat; |
| config.depthStencilFormat = depthStencilBufferInternalFormat; |
| config.bufferSize = colorBufferFormatInfo.pixelBytes * 8; |
| config.redSize = colorBufferFormatInfo.redBits; |
| config.greenSize = colorBufferFormatInfo.greenBits; |
| config.blueSize = colorBufferFormatInfo.blueBits; |
| config.luminanceSize = colorBufferFormatInfo.luminanceBits; |
| config.alphaSize = colorBufferFormatInfo.alphaBits; |
| config.alphaMaskSize = 0; |
| config.bindToTextureRGB = |
| ((colorBufferFormatInfo.format == GL_RGB) && (sampleCount <= 1)); |
| config.bindToTextureRGBA = (((colorBufferFormatInfo.format == GL_RGBA) || |
| (colorBufferFormatInfo.format == GL_BGRA_EXT)) && |
| (sampleCount <= 1)); |
| config.colorBufferType = EGL_RGB_BUFFER; |
| config.configCaveat = EGL_NONE; |
| config.configID = static_cast<EGLint>(configs.size() + 1); |
| |
| // PresentPathFast may not be conformant |
| config.conformant = 0; |
| if (!mPresentPathFastEnabled) |
| { |
| // Can only support a conformant ES2 with feature level greater than 10.0. |
| if (mRenderer11DeviceCaps.featureLevel >= D3D_FEATURE_LEVEL_10_0) |
| { |
| config.conformant |= EGL_OPENGL_ES2_BIT; |
| } |
| |
| // We can only support conformant ES3 on FL 10.1+ |
| if (maxVersion.major >= 3) |
| { |
| config.conformant |= EGL_OPENGL_ES3_BIT_KHR; |
| } |
| } |
| |
| config.depthSize = depthStencilBufferFormatInfo.depthBits; |
| config.level = 0; |
| config.matchNativePixmap = EGL_NONE; |
| config.maxPBufferWidth = rendererCaps.max2DTextureSize; |
| config.maxPBufferHeight = rendererCaps.max2DTextureSize; |
| config.maxPBufferPixels = |
| rendererCaps.max2DTextureSize * rendererCaps.max2DTextureSize; |
| config.maxSwapInterval = 4; |
| config.minSwapInterval = 0; |
| config.nativeRenderable = EGL_FALSE; |
| config.nativeVisualID = 0; |
| config.nativeVisualType = EGL_NONE; |
| |
| // Can't support ES3 at all without feature level 10.1 |
| config.renderableType = EGL_OPENGL_ES2_BIT; |
| if (maxVersion.major >= 3) |
| { |
| config.renderableType |= EGL_OPENGL_ES3_BIT_KHR; |
| } |
| |
| config.sampleBuffers = (sampleCount == 0) ? 0 : 1; |
| config.samples = sampleCount; |
| config.stencilSize = depthStencilBufferFormatInfo.stencilBits; |
| config.surfaceType = |
| EGL_PBUFFER_BIT | EGL_WINDOW_BIT | EGL_SWAP_BEHAVIOR_PRESERVED_BIT; |
| config.transparentType = EGL_NONE; |
| config.transparentRedValue = 0; |
| config.transparentGreenValue = 0; |
| config.transparentBlueValue = 0; |
| config.optimalOrientation = optimalSurfaceOrientation; |
| config.colorComponentType = gl_egl::GLComponentTypeToEGLColorComponentType( |
| colorBufferFormatInfo.componentType); |
| |
| configs.add(config); |
| } |
| } |
| } |
| |
| ASSERT(configs.size() > 0); |
| return configs; |
| } |
| |
| void Renderer11::generateDisplayExtensions(egl::DisplayExtensions *outExtensions) const |
| { |
| outExtensions->createContextRobustness = true; |
| |
| if (getShareHandleSupport()) |
| { |
| outExtensions->d3dShareHandleClientBuffer = true; |
| outExtensions->surfaceD3DTexture2DShareHandle = true; |
| } |
| outExtensions->d3dTextureClientBuffer = true; |
| |
| outExtensions->keyedMutex = true; |
| outExtensions->querySurfacePointer = true; |
| outExtensions->windowFixedSize = true; |
| |
| // If present path fast is active then the surface orientation extension isn't supported |
| outExtensions->surfaceOrientation = !mPresentPathFastEnabled; |
| |
| // D3D11 does not support present with dirty rectangles until DXGI 1.2. |
| outExtensions->postSubBuffer = mRenderer11DeviceCaps.supportsDXGI1_2; |
| |
| outExtensions->deviceQuery = true; |
| |
| outExtensions->image = true; |
| outExtensions->imageBase = true; |
| outExtensions->glTexture2DImage = true; |
| outExtensions->glTextureCubemapImage = true; |
| outExtensions->glRenderbufferImage = true; |
| |
| outExtensions->stream = true; |
| outExtensions->streamConsumerGLTexture = true; |
| outExtensions->streamConsumerGLTextureYUV = true; |
| // Not all D3D11 devices support NV12 textures |
| if (getNV12TextureSupport()) |
| { |
| outExtensions->streamProducerD3DTextureNV12 = true; |
| } |
| |
| outExtensions->flexibleSurfaceCompatibility = true; |
| outExtensions->directComposition = !!mDCompModule; |
| |
| // Contexts are virtualized so textures can be shared globally |
| outExtensions->displayTextureShareGroup = true; |
| |
| // getSyncValues requires direct composition. |
| outExtensions->getSyncValues = outExtensions->directComposition; |
| |
| // D3D11 can be used without a swap chain |
| outExtensions->surfacelessContext = true; |
| } |
| |
| gl::Error Renderer11::flush() |
| { |
| mDeviceContext->Flush(); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::finish() |
| { |
| if (!mSyncQuery.valid()) |
| { |
| D3D11_QUERY_DESC queryDesc; |
| queryDesc.Query = D3D11_QUERY_EVENT; |
| queryDesc.MiscFlags = 0; |
| |
| ANGLE_TRY(allocateResource(queryDesc, &mSyncQuery)); |
| } |
| |
| mDeviceContext->End(mSyncQuery.get()); |
| |
| HRESULT result = S_OK; |
| unsigned int attempt = 0; |
| do |
| { |
| unsigned int flushFrequency = 100; |
| UINT flags = (attempt % flushFrequency == 0) ? 0 : D3D11_ASYNC_GETDATA_DONOTFLUSH; |
| attempt++; |
| |
| result = mDeviceContext->GetData(mSyncQuery.get(), nullptr, 0, flags); |
| if (FAILED(result)) |
| { |
| return gl::OutOfMemory() << "Failed to get event query data, " << gl::FmtHR(result); |
| } |
| |
| if (result == S_FALSE) |
| { |
| // Keep polling, but allow other threads to do something useful first |
| ScheduleYield(); |
| } |
| |
| if (testDeviceLost()) |
| { |
| mDisplay->notifyDeviceLost(); |
| return gl::OutOfMemory() << "Device was lost while waiting for sync."; |
| } |
| } while (result == S_FALSE); |
| |
| return gl::NoError(); |
| } |
| |
| bool Renderer11::isValidNativeWindow(EGLNativeWindowType window) const |
| { |
| #ifdef ANGLE_ENABLE_WINDOWS_STORE |
| return NativeWindow11WinRT::IsValidNativeWindow(window); |
| #else |
| return NativeWindow11Win32::IsValidNativeWindow(window); |
| #endif |
| } |
| |
| NativeWindowD3D *Renderer11::createNativeWindow(EGLNativeWindowType window, |
| const egl::Config *config, |
| const egl::AttributeMap &attribs) const |
| { |
| #ifdef ANGLE_ENABLE_WINDOWS_STORE |
| UNUSED_VARIABLE(attribs); |
| return new NativeWindow11WinRT(window, config->alphaSize > 0); |
| #else |
| return new NativeWindow11Win32( |
| window, config->alphaSize > 0, |
| attribs.get(EGL_DIRECT_COMPOSITION_ANGLE, EGL_FALSE) == EGL_TRUE); |
| #endif |
| } |
| |
| egl::Error Renderer11::getD3DTextureInfo(const egl::Config *configuration, |
| IUnknown *d3dTexture, |
| EGLint *width, |
| EGLint *height, |
| GLenum *fboFormat) const |
| { |
| ID3D11Texture2D *texture = d3d11::DynamicCastComObject<ID3D11Texture2D>(d3dTexture); |
| if (texture == nullptr) |
| { |
| return egl::EglBadParameter() << "client buffer is not a ID3D11Texture2D"; |
| } |
| |
| ID3D11Device *textureDevice = nullptr; |
| texture->GetDevice(&textureDevice); |
| if (textureDevice != mDevice) |
| { |
| SafeRelease(texture); |
| return egl::EglBadParameter() << "Texture's device does not match."; |
| } |
| SafeRelease(textureDevice); |
| |
| D3D11_TEXTURE2D_DESC desc = {0}; |
| texture->GetDesc(&desc); |
| SafeRelease(texture); |
| |
| if (width) |
| { |
| *width = static_cast<EGLint>(desc.Width); |
| } |
| if (height) |
| { |
| *height = static_cast<EGLint>(desc.Height); |
| } |
| if (static_cast<EGLint>(desc.SampleDesc.Count) != configuration->samples) |
| { |
| // Both the texture and EGL config sample count may not be the same when multi-sampling |
| // is disabled. The EGL sample count can be 0 but a D3D texture is always 1. Therefore, |
| // we must only check for a invalid match when the EGL config is non-zero or the texture is |
| // not one. |
| if (configuration->samples != 0 || desc.SampleDesc.Count != 1) |
| { |
| return egl::EglBadParameter() << "Texture's sample count does not match."; |
| } |
| } |
| // From table egl.restrictions in EGL_ANGLE_d3d_texture_client_buffer. |
| switch (desc.Format) |
| { |
| case DXGI_FORMAT_R8G8B8A8_UNORM: |
| case DXGI_FORMAT_R8G8B8A8_UNORM_SRGB: |
| case DXGI_FORMAT_B8G8R8A8_UNORM: |
| case DXGI_FORMAT_B8G8R8A8_UNORM_SRGB: |
| case DXGI_FORMAT_R16G16B16A16_FLOAT: |
| case DXGI_FORMAT_R32G32B32A32_FLOAT: |
| break; |
| |
| default: |
| return egl::EglBadParameter() |
| << "Unknown client buffer texture format: " << desc.Format; |
| } |
| |
| if (fboFormat) |
| { |
| const angle::Format &angleFormat = d3d11_angle::GetFormat(desc.Format); |
| *fboFormat = angleFormat.fboImplementationInternalFormat; |
| } |
| |
| return egl::NoError(); |
| } |
| |
| egl::Error Renderer11::validateShareHandle(const egl::Config *config, |
| HANDLE shareHandle, |
| const egl::AttributeMap &attribs) const |
| { |
| if (shareHandle == nullptr) |
| { |
| return egl::EglBadParameter() << "NULL share handle."; |
| } |
| |
| ID3D11Resource *tempResource11 = nullptr; |
| HRESULT result = mDevice->OpenSharedResource(shareHandle, __uuidof(ID3D11Resource), |
| (void **)&tempResource11); |
| if (FAILED(result)) |
| { |
| return egl::EglBadParameter() << "Failed to open share handle, " << gl::FmtHR(result); |
| } |
| |
| ID3D11Texture2D *texture2D = d3d11::DynamicCastComObject<ID3D11Texture2D>(tempResource11); |
| SafeRelease(tempResource11); |
| |
| if (texture2D == nullptr) |
| { |
| return egl::EglBadParameter() |
| << "Failed to query ID3D11Texture2D object from share handle."; |
| } |
| |
| D3D11_TEXTURE2D_DESC desc = {0}; |
| texture2D->GetDesc(&desc); |
| SafeRelease(texture2D); |
| |
| EGLint width = attribs.getAsInt(EGL_WIDTH, 0); |
| EGLint height = attribs.getAsInt(EGL_HEIGHT, 0); |
| ASSERT(width != 0 && height != 0); |
| |
| const d3d11::Format &backbufferFormatInfo = |
| d3d11::Format::Get(config->renderTargetFormat, getRenderer11DeviceCaps()); |
| |
| if (desc.Width != static_cast<UINT>(width) || desc.Height != static_cast<UINT>(height) || |
| desc.Format != backbufferFormatInfo.texFormat || desc.MipLevels != 1 || desc.ArraySize != 1) |
| { |
| return egl::EglBadParameter() << "Invalid texture parameters in share handle texture."; |
| } |
| |
| return egl::NoError(); |
| } |
| |
| SwapChainD3D *Renderer11::createSwapChain(NativeWindowD3D *nativeWindow, |
| HANDLE shareHandle, |
| IUnknown *d3dTexture, |
| GLenum backBufferFormat, |
| GLenum depthBufferFormat, |
| EGLint orientation, |
| EGLint samples) |
| { |
| return new SwapChain11(this, GetAs<NativeWindow11>(nativeWindow), shareHandle, d3dTexture, |
| backBufferFormat, depthBufferFormat, orientation, samples); |
| } |
| |
| void *Renderer11::getD3DDevice() |
| { |
| return reinterpret_cast<void *>(mDevice); |
| } |
| |
| gl::Error Renderer11::generateSwizzle(const gl::Context *context, gl::Texture *texture) |
| { |
| if (texture) |
| { |
| TextureD3D *textureD3D = GetImplAs<TextureD3D>(texture); |
| ASSERT(textureD3D); |
| |
| TextureStorage *texStorage = nullptr; |
| ANGLE_TRY(textureD3D->getNativeTexture(context, &texStorage)); |
| |
| if (texStorage) |
| { |
| TextureStorage11 *storage11 = GetAs<TextureStorage11>(texStorage); |
| const gl::TextureState &textureState = texture->getTextureState(); |
| ANGLE_TRY(storage11->generateSwizzles(context, textureState.getSwizzleState())); |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::generateSwizzles(const gl::Context *context, gl::SamplerType type) |
| { |
| const auto &glState = context->getGLState(); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(glState.getProgram()); |
| |
| unsigned int samplerRange = programD3D->getUsedSamplerRange(type); |
| |
| for (unsigned int i = 0; i < samplerRange; i++) |
| { |
| GLenum textureType = programD3D->getSamplerTextureType(type, i); |
| GLint textureUnit = programD3D->getSamplerMapping(type, i, context->getCaps()); |
| if (textureUnit != -1) |
| { |
| gl::Texture *texture = glState.getSamplerTexture(textureUnit, textureType); |
| ASSERT(texture); |
| if (texture->getTextureState().swizzleRequired()) |
| { |
| ANGLE_TRY(generateSwizzle(context, texture)); |
| } |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::generateSwizzles(const gl::Context *context) |
| { |
| ANGLE_TRY(generateSwizzles(context, gl::SAMPLER_VERTEX)); |
| ANGLE_TRY(generateSwizzles(context, gl::SAMPLER_PIXEL)); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::setUniformBuffers(const gl::ContextState &data, |
| const std::vector<GLint> &vertexUniformBuffers, |
| const std::vector<GLint> &fragmentUniformBuffers) |
| { |
| for (size_t uniformBufferIndex = 0; uniformBufferIndex < vertexUniformBuffers.size(); |
| uniformBufferIndex++) |
| { |
| GLint binding = vertexUniformBuffers[uniformBufferIndex]; |
| |
| if (binding == -1) |
| { |
| continue; |
| } |
| |
| const gl::OffsetBindingPointer<gl::Buffer> &uniformBuffer = |
| data.getState().getIndexedUniformBuffer(binding); |
| GLintptr uniformBufferOffset = uniformBuffer.getOffset(); |
| GLsizeiptr uniformBufferSize = uniformBuffer.getSize(); |
| |
| if (uniformBuffer.get() == nullptr) |
| { |
| continue; |
| } |
| |
| Buffer11 *bufferStorage = GetImplAs<Buffer11>(uniformBuffer.get()); |
| ID3D11Buffer *constantBuffer = nullptr; |
| UINT firstConstant = 0; |
| UINT numConstants = 0; |
| |
| ANGLE_TRY(bufferStorage->getConstantBufferRange(uniformBufferOffset, uniformBufferSize, |
| &constantBuffer, &firstConstant, |
| &numConstants)); |
| |
| if (!constantBuffer) |
| { |
| return gl::OutOfMemory() << "Error retrieving constant buffer"; |
| } |
| |
| if (mCurrentConstantBufferVS[uniformBufferIndex] != bufferStorage->getSerial() || |
| mCurrentConstantBufferVSOffset[uniformBufferIndex] != uniformBufferOffset || |
| mCurrentConstantBufferVSSize[uniformBufferIndex] != uniformBufferSize) |
| { |
| if (firstConstant != 0 && uniformBufferSize != 0) |
| { |
| ASSERT(numConstants != 0); |
| mDeviceContext1->VSSetConstantBuffers1( |
| getReservedVertexUniformBuffers() + |
| static_cast<unsigned int>(uniformBufferIndex), |
| 1, &constantBuffer, &firstConstant, &numConstants); |
| } |
| else |
| { |
| mDeviceContext->VSSetConstantBuffers( |
| getReservedVertexUniformBuffers() + |
| static_cast<unsigned int>(uniformBufferIndex), |
| 1, &constantBuffer); |
| } |
| |
| mCurrentConstantBufferVS[uniformBufferIndex] = bufferStorage->getSerial(); |
| mCurrentConstantBufferVSOffset[uniformBufferIndex] = uniformBufferOffset; |
| mCurrentConstantBufferVSSize[uniformBufferIndex] = uniformBufferSize; |
| } |
| } |
| |
| for (size_t uniformBufferIndex = 0; uniformBufferIndex < fragmentUniformBuffers.size(); |
| uniformBufferIndex++) |
| { |
| GLint binding = fragmentUniformBuffers[uniformBufferIndex]; |
| |
| if (binding == -1) |
| { |
| continue; |
| } |
| |
| const gl::OffsetBindingPointer<gl::Buffer> &uniformBuffer = |
| data.getState().getIndexedUniformBuffer(binding); |
| GLintptr uniformBufferOffset = uniformBuffer.getOffset(); |
| GLsizeiptr uniformBufferSize = uniformBuffer.getSize(); |
| |
| if (uniformBuffer.get() == nullptr) |
| { |
| continue; |
| } |
| |
| Buffer11 *bufferStorage = GetImplAs<Buffer11>(uniformBuffer.get()); |
| ID3D11Buffer *constantBuffer = nullptr; |
| UINT firstConstant = 0; |
| UINT numConstants = 0; |
| |
| ANGLE_TRY(bufferStorage->getConstantBufferRange(uniformBufferOffset, uniformBufferSize, |
| &constantBuffer, &firstConstant, |
| &numConstants)); |
| |
| if (!constantBuffer) |
| { |
| return gl::OutOfMemory() << "Error retrieving constant buffer"; |
| } |
| |
| if (mCurrentConstantBufferPS[uniformBufferIndex] != bufferStorage->getSerial() || |
| mCurrentConstantBufferPSOffset[uniformBufferIndex] != uniformBufferOffset || |
| mCurrentConstantBufferPSSize[uniformBufferIndex] != uniformBufferSize) |
| { |
| if (firstConstant != 0 && uniformBufferSize != 0) |
| { |
| mDeviceContext1->PSSetConstantBuffers1( |
| getReservedFragmentUniformBuffers() + |
| static_cast<unsigned int>(uniformBufferIndex), |
| 1, &constantBuffer, &firstConstant, &numConstants); |
| } |
| else |
| { |
| mDeviceContext->PSSetConstantBuffers( |
| getReservedFragmentUniformBuffers() + |
| static_cast<unsigned int>(uniformBufferIndex), |
| 1, &constantBuffer); |
| } |
| |
| mCurrentConstantBufferPS[uniformBufferIndex] = bufferStorage->getSerial(); |
| mCurrentConstantBufferPSOffset[uniformBufferIndex] = uniformBufferOffset; |
| mCurrentConstantBufferPSSize[uniformBufferIndex] = uniformBufferSize; |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| bool Renderer11::applyPrimitiveType(GLenum mode, GLsizei count, bool usesPointSize) |
| { |
| D3D11_PRIMITIVE_TOPOLOGY primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_UNDEFINED; |
| |
| GLsizei minCount = 0; |
| |
| switch (mode) |
| { |
| case GL_POINTS: |
| primitiveTopology = D3D11_PRIMITIVE_TOPOLOGY_POINTLIST; |
| minCount = 1; |
| break; |
| case GL_LINES: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINELIST; |
| minCount = 2; |
| break; |
| case GL_LINE_LOOP: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP; |
| minCount = 2; |
| break; |
| case GL_LINE_STRIP: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_LINESTRIP; |
| minCount = 2; |
| break; |
| case GL_TRIANGLES: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST; |
| minCount = 3; |
| break; |
| case GL_TRIANGLE_STRIP: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP; |
| minCount = 3; |
| break; |
| // emulate fans via rewriting index buffer |
| case GL_TRIANGLE_FAN: |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST; |
| minCount = 3; |
| break; |
| default: |
| UNREACHABLE(); |
| return false; |
| } |
| |
| // If instanced pointsprite emulation is being used and If gl_PointSize is used in the shader, |
| // GL_POINTS mode is expected to render pointsprites. |
| // Instanced PointSprite emulation requires that the topology to be |
| // D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST. |
| if (mode == GL_POINTS && usesPointSize && getWorkarounds().useInstancedPointSpriteEmulation) |
| { |
| primitiveTopology = D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST; |
| } |
| |
| mStateManager.setPrimitiveTopology(primitiveTopology); |
| |
| return count >= minCount; |
| } |
| |
| gl::Error Renderer11::applyTransformFeedbackBuffers(const gl::ContextState &data) |
| { |
| const auto &state = data.getState(); |
| |
| // If transform feedback is not active, unbind all buffers |
| if (!state.isTransformFeedbackActiveUnpaused()) |
| { |
| if (mAppliedTFObject != 0) |
| { |
| mDeviceContext->SOSetTargets(0, nullptr, nullptr); |
| mAppliedTFObject = 0; |
| } |
| return gl::NoError(); |
| } |
| |
| gl::TransformFeedback *transformFeedback = state.getCurrentTransformFeedback(); |
| TransformFeedback11 *transformFeedback11 = GetImplAs<TransformFeedback11>(transformFeedback); |
| uintptr_t transformFeedbackId = reinterpret_cast<uintptr_t>(transformFeedback11); |
| if (mAppliedTFObject == transformFeedbackId && !transformFeedback11->isDirty()) |
| { |
| return gl::NoError(); |
| } |
| |
| const std::vector<ID3D11Buffer *> *soBuffers = nullptr; |
| ANGLE_TRY_RESULT(transformFeedback11->getSOBuffers(), soBuffers); |
| const std::vector<UINT> &soOffsets = transformFeedback11->getSOBufferOffsets(); |
| |
| mDeviceContext->SOSetTargets(transformFeedback11->getNumSOBuffers(), soBuffers->data(), |
| soOffsets.data()); |
| |
| mAppliedTFObject = transformFeedbackId; |
| transformFeedback11->onApply(); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawArraysImpl(const gl::Context *context, |
| GLenum mode, |
| GLint startVertex, |
| GLsizei count, |
| GLsizei instances) |
| { |
| const auto &data = context->getContextState(); |
| const auto &glState = data.getState(); |
| gl::Program *program = glState.getProgram(); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(program); |
| GLsizei adjustedInstanceCount = GetAdjustedInstanceCount(program, instances); |
| |
| if (programD3D->usesGeometryShader(mode) && glState.isTransformFeedbackActiveUnpaused()) |
| { |
| // Since we use a geometry if-and-only-if we rewrite vertex streams, transform feedback |
| // won't get the correct output. To work around this, draw with *only* the stream out |
| // first (no pixel shader) to feed the stream out buffers and then draw again with the |
| // geometry shader + pixel shader to rasterize the primitives. |
| mStateManager.setPixelShader(nullptr); |
| |
| if (adjustedInstanceCount > 0) |
| { |
| mDeviceContext->DrawInstanced(count, adjustedInstanceCount, 0, 0); |
| } |
| else |
| { |
| mDeviceContext->Draw(count, 0); |
| } |
| |
| rx::ShaderExecutableD3D *pixelExe = nullptr; |
| ANGLE_TRY(programD3D->getPixelExecutableForCachedOutputLayout(&pixelExe, nullptr)); |
| |
| // Skip the draw call if rasterizer discard is enabled (or no fragment shader). |
| if (!pixelExe || glState.getRasterizerState().rasterizerDiscard) |
| { |
| return gl::NoError(); |
| } |
| |
| mStateManager.setPixelShader(&GetAs<ShaderExecutable11>(pixelExe)->getPixelShader()); |
| |
| // Retrieve the geometry shader. |
| rx::ShaderExecutableD3D *geometryExe = nullptr; |
| ANGLE_TRY( |
| programD3D->getGeometryExecutableForPrimitiveType(data, mode, &geometryExe, nullptr)); |
| |
| mStateManager.setGeometryShader( |
| &GetAs<ShaderExecutable11>(geometryExe)->getGeometryShader()); |
| |
| if (adjustedInstanceCount > 0) |
| { |
| mDeviceContext->DrawInstanced(count, adjustedInstanceCount, 0, 0); |
| } |
| else |
| { |
| mDeviceContext->Draw(count, 0); |
| } |
| return gl::NoError(); |
| } |
| |
| if (mode == GL_LINE_LOOP) |
| { |
| return drawLineLoop(data, count, GL_NONE, nullptr, 0, adjustedInstanceCount); |
| } |
| |
| if (mode == GL_TRIANGLE_FAN) |
| { |
| return drawTriangleFan(data, count, GL_NONE, nullptr, 0, adjustedInstanceCount); |
| } |
| |
| bool useInstancedPointSpriteEmulation = |
| programD3D->usesPointSize() && getWorkarounds().useInstancedPointSpriteEmulation; |
| |
| if (mode != GL_POINTS || !useInstancedPointSpriteEmulation) |
| { |
| if (adjustedInstanceCount == 0) |
| { |
| mDeviceContext->Draw(count, 0); |
| } |
| else |
| { |
| mDeviceContext->DrawInstanced(count, adjustedInstanceCount, 0, 0); |
| } |
| return gl::NoError(); |
| } |
| |
| // This code should not be reachable by multi-view programs. |
| ASSERT(program->usesMultiview() == false); |
| |
| // If the shader is writing to gl_PointSize, then pointsprites are being rendered. |
| // Emulating instanced point sprites for FL9_3 requires the topology to be |
| // D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST and DrawIndexedInstanced is called instead. |
| if (adjustedInstanceCount == 0) |
| { |
| mDeviceContext->DrawIndexedInstanced(6, count, 0, 0, 0); |
| return gl::NoError(); |
| } |
| |
| // If pointsprite emulation is used with glDrawArraysInstanced then we need to take a less |
| // efficent code path. Instanced rendering of emulated pointsprites requires a loop to draw each |
| // batch of points. An offset into the instanced data buffer is calculated and applied on each |
| // iteration to ensure all instances are rendered correctly. Each instance being rendered |
| // requires the inputlayout cache to reapply buffers and offsets. |
| for (GLsizei i = 0; i < instances; i++) |
| { |
| ANGLE_TRY(mStateManager.updateVertexOffsetsForPointSpritesEmulation(startVertex, i)); |
| mDeviceContext->DrawIndexedInstanced(6, count, 0, 0, 0); |
| } |
| |
| // This required by updateVertexOffsets... above but is outside of the loop for speed. |
| mStateManager.invalidateVertexBuffer(); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawElementsImpl(const gl::Context *context, |
| GLenum mode, |
| GLsizei count, |
| GLenum type, |
| const void *indices, |
| GLsizei instances) |
| { |
| const auto &data = context->getContextState(); |
| TranslatedIndexData indexInfo; |
| const gl::Program *program = data.getState().getProgram(); |
| GLsizei adjustedInstanceCount = GetAdjustedInstanceCount(program, instances); |
| |
| if (!DrawCallNeedsTranslation(context, mode, type)) |
| { |
| ANGLE_TRY(mStateManager.applyIndexBuffer(data, nullptr, 0, type, &indexInfo)); |
| ANGLE_TRY(mStateManager.applyVertexBuffer(context, mode, 0, 0, 0, &indexInfo)); |
| const gl::Type &typeInfo = gl::GetTypeInfo(type); |
| unsigned int startIndexLocation = |
| static_cast<unsigned int>(reinterpret_cast<const uintptr_t>(indices)) / typeInfo.bytes; |
| if (adjustedInstanceCount > 0) |
| { |
| mDeviceContext->DrawIndexedInstanced(count, adjustedInstanceCount, startIndexLocation, |
| 0, 0); |
| } |
| else |
| { |
| mDeviceContext->DrawIndexed(count, startIndexLocation, 0); |
| } |
| return gl::NoError(); |
| } |
| |
| const gl::IndexRange &indexRange = |
| context->getParams<gl::HasIndexRange>().getIndexRange().value(); |
| indexInfo.indexRange = indexRange; |
| |
| ANGLE_TRY(mStateManager.applyIndexBuffer(data, indices, count, type, &indexInfo)); |
| size_t vertexCount = indexInfo.indexRange.vertexCount(); |
| ANGLE_TRY(mStateManager.applyVertexBuffer( |
| context, mode, static_cast<GLsizei>(indexInfo.indexRange.start), |
| static_cast<GLsizei>(vertexCount), instances, &indexInfo)); |
| |
| int startVertex = static_cast<int>(indexInfo.indexRange.start); |
| int baseVertex = -startVertex; |
| |
| if (mode == GL_LINE_LOOP) |
| { |
| return drawLineLoop(data, count, type, indices, baseVertex, adjustedInstanceCount); |
| } |
| |
| if (mode == GL_TRIANGLE_FAN) |
| { |
| return drawTriangleFan(data, count, type, indices, baseVertex, adjustedInstanceCount); |
| } |
| |
| const ProgramD3D *programD3D = GetImplAs<ProgramD3D>(data.getState().getProgram()); |
| |
| if (mode != GL_POINTS || !programD3D->usesInstancedPointSpriteEmulation()) |
| { |
| if (adjustedInstanceCount == 0) |
| { |
| mDeviceContext->DrawIndexed(count, 0, baseVertex); |
| } |
| else |
| { |
| mDeviceContext->DrawIndexedInstanced(count, adjustedInstanceCount, 0, baseVertex, 0); |
| } |
| return gl::NoError(); |
| } |
| |
| // This code should not be reachable by multi-view programs. |
| ASSERT(program->usesMultiview() == false); |
| |
| // If the shader is writing to gl_PointSize, then pointsprites are being rendered. |
| // Emulating instanced point sprites for FL9_3 requires the topology to be |
| // D3D_PRIMITIVE_TOPOLOGY_TRIANGLELIST and DrawIndexedInstanced is called instead. |
| // |
| // The count parameter passed to drawElements represents the total number of instances to be |
| // rendered. Each instance is referenced by the bound index buffer from the the caller. |
| // |
| // Indexed pointsprite emulation replicates data for duplicate entries found in the index |
| // buffer. This is not an efficent rendering mechanism and is only used on downlevel renderers |
| // that do not support geometry shaders. |
| if (instances == 0) |
| { |
| mDeviceContext->DrawIndexedInstanced(6, count, 0, 0, 0); |
| return gl::NoError(); |
| } |
| |
| // If pointsprite emulation is used with glDrawElementsInstanced then we need to take a less |
| // efficent code path. Instanced rendering of emulated pointsprites requires a loop to draw each |
| // batch of points. An offset into the instanced data buffer is calculated and applied on each |
| // iteration to ensure all instances are rendered correctly. |
| GLsizei elementsToRender = static_cast<GLsizei>(indexInfo.indexRange.vertexCount()); |
| |
| // Each instance being rendered requires the inputlayout cache to reapply buffers and offsets. |
| for (GLsizei i = 0; i < instances; i++) |
| { |
| ANGLE_TRY(mStateManager.updateVertexOffsetsForPointSpritesEmulation(startVertex, i)); |
| mDeviceContext->DrawIndexedInstanced(6, elementsToRender, 0, 0, 0); |
| } |
| mStateManager.invalidateVertexBuffer(); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawArraysIndirectImpl(const gl::Context *context, |
| GLenum mode, |
| const void *indirect) |
| { |
| const auto &contextState = context->getContextState(); |
| if (skipDraw(contextState, mode)) |
| { |
| return gl::NoError(); |
| } |
| |
| const auto &glState = context->getGLState(); |
| gl::Buffer *drawIndirectBuffer = glState.getDrawIndirectBuffer(); |
| ASSERT(drawIndirectBuffer); |
| Buffer11 *storage = GetImplAs<Buffer11>(drawIndirectBuffer); |
| uintptr_t offset = reinterpret_cast<uintptr_t>(indirect); |
| |
| if (!DrawCallNeedsTranslation(context, mode, GL_NONE)) |
| { |
| mStateManager.applyVertexBuffer(context, mode, 0, 0, 0, nullptr); |
| ID3D11Buffer *buffer = nullptr; |
| ANGLE_TRY_RESULT(storage->getBuffer(BUFFER_USAGE_INDIRECT), buffer); |
| mDeviceContext->DrawInstancedIndirect(buffer, static_cast<unsigned int>(offset)); |
| return gl::NoError(); |
| } |
| |
| const uint8_t *bufferData = nullptr; |
| ANGLE_TRY(storage->getData(&bufferData)); |
| ASSERT(bufferData); |
| const gl::DrawArraysIndirectCommand *args = |
| reinterpret_cast<const gl::DrawArraysIndirectCommand *>(bufferData + offset); |
| GLuint count = args->count; |
| GLuint instances = args->instanceCount; |
| GLuint first = args->first; |
| |
| ANGLE_TRY(mStateManager.applyVertexBuffer(context, mode, first, count, instances, nullptr)); |
| |
| if (mode == GL_LINE_LOOP) |
| { |
| return drawLineLoop(contextState, count, GL_NONE, nullptr, 0, instances); |
| } |
| if (mode == GL_TRIANGLE_FAN) |
| { |
| return drawTriangleFan(contextState, count, GL_NONE, nullptr, 0, instances); |
| } |
| |
| mDeviceContext->DrawInstanced(count, instances, 0, 0); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawElementsIndirectImpl(const gl::Context *context, |
| GLenum mode, |
| GLenum type, |
| const void *indirect) |
| { |
| const auto &contextState = context->getContextState(); |
| if (skipDraw(contextState, mode)) |
| { |
| return gl::NoError(); |
| } |
| |
| const auto &glState = context->getGLState(); |
| gl::Buffer *drawIndirectBuffer = glState.getDrawIndirectBuffer(); |
| ASSERT(drawIndirectBuffer); |
| Buffer11 *storage = GetImplAs<Buffer11>(drawIndirectBuffer); |
| uintptr_t offset = reinterpret_cast<uintptr_t>(indirect); |
| |
| TranslatedIndexData indexInfo; |
| if (!DrawCallNeedsTranslation(context, mode, type)) |
| { |
| ANGLE_TRY(mStateManager.applyIndexBuffer(contextState, nullptr, 0, type, &indexInfo)); |
| ANGLE_TRY(mStateManager.applyVertexBuffer(context, mode, 0, 0, 0, &indexInfo)); |
| ID3D11Buffer *buffer = nullptr; |
| ANGLE_TRY_RESULT(storage->getBuffer(BUFFER_USAGE_INDIRECT), buffer); |
| mDeviceContext->DrawIndexedInstancedIndirect(buffer, static_cast<unsigned int>(offset)); |
| return gl::NoError(); |
| } |
| |
| const uint8_t *bufferData = nullptr; |
| ANGLE_TRY(storage->getData(&bufferData)); |
| ASSERT(bufferData); |
| |
| const gl::DrawElementsIndirectCommand *cmd = |
| reinterpret_cast<const gl::DrawElementsIndirectCommand *>(bufferData + offset); |
| GLuint count = cmd->count; |
| GLuint instances = cmd->primCount; |
| GLuint firstIndex = cmd->firstIndex; |
| GLint baseVertex = cmd->baseVertex; |
| |
| const gl::Type &typeInfo = gl::GetTypeInfo(type); |
| uint8_t *indices = static_cast<uint8_t *>(0) + firstIndex * typeInfo.bytes; |
| |
| gl::Buffer *elementArrayBuffer = glState.getVertexArray()->getElementArrayBuffer().get(); |
| ASSERT(elementArrayBuffer); |
| gl::IndexRange indexRange; |
| ANGLE_TRY(elementArrayBuffer->getIndexRange(type, reinterpret_cast<size_t>(indices), count, |
| glState.isPrimitiveRestartEnabled(), &indexRange)); |
| |
| indexInfo.indexRange = indexRange; |
| ANGLE_TRY(mStateManager.applyIndexBuffer(contextState, indices, count, type, &indexInfo)); |
| size_t vertexCount = indexRange.vertexCount(); |
| ANGLE_TRY(mStateManager.applyVertexBuffer( |
| context, mode, static_cast<GLsizei>(indexRange.start) + baseVertex, |
| static_cast<GLsizei>(vertexCount), instances, &indexInfo)); |
| |
| int baseVertexLocation = -static_cast<int>(indexRange.start); |
| if (mode == GL_LINE_LOOP) |
| { |
| return drawLineLoop(contextState, count, type, indices, baseVertexLocation, instances); |
| } |
| |
| if (mode == GL_TRIANGLE_FAN) |
| { |
| return drawTriangleFan(contextState, count, type, indices, baseVertexLocation, instances); |
| } |
| |
| mDeviceContext->DrawIndexedInstanced(count, instances, 0, baseVertexLocation, 0); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawLineLoop(const gl::ContextState &data, |
| GLsizei count, |
| GLenum type, |
| const void *indexPointer, |
| int baseVertex, |
| int instances) |
| { |
| const auto &glState = data.getState(); |
| gl::VertexArray *vao = glState.getVertexArray(); |
| gl::Buffer *elementArrayBuffer = vao->getElementArrayBuffer().get(); |
| |
| const void *indices = indexPointer; |
| |
| // Get the raw indices for an indexed draw |
| if (type != GL_NONE && elementArrayBuffer) |
| { |
| BufferD3D *storage = GetImplAs<BufferD3D>(elementArrayBuffer); |
| intptr_t offset = reinterpret_cast<intptr_t>(indices); |
| |
| const uint8_t *bufferData = nullptr; |
| ANGLE_TRY(storage->getData(&bufferData)); |
| |
| indices = bufferData + offset; |
| } |
| |
| if (!mLineLoopIB) |
| { |
| mLineLoopIB = new StreamingIndexBufferInterface(this); |
| gl::Error error = |
| mLineLoopIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT); |
| if (error.isError()) |
| { |
| SafeDelete(mLineLoopIB); |
| return error; |
| } |
| } |
| |
| // Checked by Renderer11::applyPrimitiveType |
| ASSERT(count >= 0); |
| |
| if (static_cast<unsigned int>(count) + 1 > |
| (std::numeric_limits<unsigned int>::max() / sizeof(unsigned int))) |
| { |
| return gl::OutOfMemory() << "Failed to create a 32-bit looping index buffer for " |
| "GL_LINE_LOOP, too many indices required."; |
| } |
| |
| GetLineLoopIndices(indices, type, static_cast<GLuint>(count), |
| glState.isPrimitiveRestartEnabled(), &mScratchIndexDataBuffer); |
| |
| unsigned int spaceNeeded = |
| static_cast<unsigned int>(sizeof(GLuint) * mScratchIndexDataBuffer.size()); |
| ANGLE_TRY(mLineLoopIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT)); |
| |
| void *mappedMemory = nullptr; |
| unsigned int offset; |
| ANGLE_TRY(mLineLoopIB->mapBuffer(spaceNeeded, &mappedMemory, &offset)); |
| |
| // Copy over the converted index data. |
| memcpy(mappedMemory, &mScratchIndexDataBuffer[0], |
| sizeof(GLuint) * mScratchIndexDataBuffer.size()); |
| |
| ANGLE_TRY(mLineLoopIB->unmapBuffer()); |
| |
| IndexBuffer11 *indexBuffer = GetAs<IndexBuffer11>(mLineLoopIB->getIndexBuffer()); |
| const d3d11::Buffer &d3dIndexBuffer = indexBuffer->getBuffer(); |
| DXGI_FORMAT indexFormat = indexBuffer->getIndexFormat(); |
| |
| mStateManager.setIndexBuffer(d3dIndexBuffer.get(), indexFormat, offset, false); |
| |
| UINT indexCount = static_cast<UINT>(mScratchIndexDataBuffer.size()); |
| |
| if (instances > 0) |
| { |
| mDeviceContext->DrawIndexedInstanced(indexCount, instances, 0, baseVertex, 0); |
| } |
| else |
| { |
| mDeviceContext->DrawIndexed(indexCount, 0, baseVertex); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::drawTriangleFan(const gl::ContextState &data, |
| GLsizei count, |
| GLenum type, |
| const void *indices, |
| int baseVertex, |
| int instances) |
| { |
| gl::VertexArray *vao = data.getState().getVertexArray(); |
| gl::Buffer *elementArrayBuffer = vao->getElementArrayBuffer().get(); |
| |
| const void *indexPointer = indices; |
| |
| // Get the raw indices for an indexed draw |
| if (type != GL_NONE && elementArrayBuffer) |
| { |
| BufferD3D *storage = GetImplAs<BufferD3D>(elementArrayBuffer); |
| intptr_t offset = reinterpret_cast<intptr_t>(indices); |
| |
| const uint8_t *bufferData = nullptr; |
| ANGLE_TRY(storage->getData(&bufferData)); |
| |
| indexPointer = bufferData + offset; |
| } |
| |
| if (!mTriangleFanIB) |
| { |
| mTriangleFanIB = new StreamingIndexBufferInterface(this); |
| gl::Error error = |
| mTriangleFanIB->reserveBufferSpace(INITIAL_INDEX_BUFFER_SIZE, GL_UNSIGNED_INT); |
| if (error.isError()) |
| { |
| SafeDelete(mTriangleFanIB); |
| return error; |
| } |
| } |
| |
| // Checked by Renderer11::applyPrimitiveType |
| ASSERT(count >= 3); |
| |
| const GLuint numTris = count - 2; |
| |
| if (numTris > (std::numeric_limits<unsigned int>::max() / (sizeof(unsigned int) * 3))) |
| { |
| return gl::OutOfMemory() << "Failed to create a scratch index buffer for GL_TRIANGLE_FAN, " |
| "too many indices required."; |
| } |
| |
| GetTriFanIndices(indexPointer, type, count, data.getState().isPrimitiveRestartEnabled(), |
| &mScratchIndexDataBuffer); |
| |
| const unsigned int spaceNeeded = |
| static_cast<unsigned int>(mScratchIndexDataBuffer.size() * sizeof(unsigned int)); |
| ANGLE_TRY(mTriangleFanIB->reserveBufferSpace(spaceNeeded, GL_UNSIGNED_INT)); |
| |
| void *mappedMemory = nullptr; |
| unsigned int offset; |
| ANGLE_TRY(mTriangleFanIB->mapBuffer(spaceNeeded, &mappedMemory, &offset)); |
| |
| memcpy(mappedMemory, &mScratchIndexDataBuffer[0], spaceNeeded); |
| |
| ANGLE_TRY(mTriangleFanIB->unmapBuffer()); |
| |
| IndexBuffer11 *indexBuffer = GetAs<IndexBuffer11>(mTriangleFanIB->getIndexBuffer()); |
| const d3d11::Buffer &d3dIndexBuffer = indexBuffer->getBuffer(); |
| DXGI_FORMAT indexFormat = indexBuffer->getIndexFormat(); |
| |
| mStateManager.setIndexBuffer(d3dIndexBuffer.get(), indexFormat, offset, false); |
| |
| UINT indexCount = static_cast<UINT>(mScratchIndexDataBuffer.size()); |
| |
| if (instances > 0) |
| { |
| mDeviceContext->DrawIndexedInstanced(indexCount, instances, 0, baseVertex, 0); |
| } |
| else |
| { |
| mDeviceContext->DrawIndexed(indexCount, 0, baseVertex); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| // TODO(jmadill): Move to StateManager11. |
| gl::Error Renderer11::applyUniforms(const ProgramD3D &programD3D, |
| GLenum drawMode, |
| const std::vector<D3DUniform *> &uniformArray) |
| { |
| unsigned int totalRegisterCountVS = 0; |
| unsigned int totalRegisterCountPS = 0; |
| |
| bool vertexUniformsDirty = false; |
| bool pixelUniformsDirty = false; |
| |
| for (const D3DUniform *uniform : uniformArray) |
| { |
| if (uniform->isReferencedByVertexShader() && !uniform->isSampler()) |
| { |
| totalRegisterCountVS += uniform->registerCount; |
| vertexUniformsDirty = (vertexUniformsDirty || uniform->dirty); |
| } |
| |
| if (uniform->isReferencedByFragmentShader() && !uniform->isSampler()) |
| { |
| totalRegisterCountPS += uniform->registerCount; |
| pixelUniformsDirty = (pixelUniformsDirty || uniform->dirty); |
| } |
| } |
| |
| UniformStorage11 *vertexUniformStorage = |
| GetAs<UniformStorage11>(&programD3D.getVertexUniformStorage()); |
| UniformStorage11 *fragmentUniformStorage = |
| GetAs<UniformStorage11>(&programD3D.getFragmentUniformStorage()); |
| ASSERT(vertexUniformStorage); |
| ASSERT(fragmentUniformStorage); |
| |
| const d3d11::Buffer *vertexConstantBuffer = nullptr; |
| ANGLE_TRY(vertexUniformStorage->getConstantBuffer(this, &vertexConstantBuffer)); |
| const d3d11::Buffer *pixelConstantBuffer = nullptr; |
| ANGLE_TRY(fragmentUniformStorage->getConstantBuffer(this, &pixelConstantBuffer)); |
| |
| float(*mapVS)[4] = nullptr; |
| float(*mapPS)[4] = nullptr; |
| |
| if (totalRegisterCountVS > 0 && vertexUniformsDirty) |
| { |
| D3D11_MAPPED_SUBRESOURCE map = {0}; |
| HRESULT result = |
| mDeviceContext->Map(vertexConstantBuffer->get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &map); |
| ASSERT(SUCCEEDED(result)); |
| mapVS = (float(*)[4])map.pData; |
| } |
| |
| if (totalRegisterCountPS > 0 && pixelUniformsDirty) |
| { |
| D3D11_MAPPED_SUBRESOURCE map = {0}; |
| HRESULT result = |
| mDeviceContext->Map(pixelConstantBuffer->get(), 0, D3D11_MAP_WRITE_DISCARD, 0, &map); |
| ASSERT(SUCCEEDED(result)); |
| mapPS = (float(*)[4])map.pData; |
| } |
| |
| for (const D3DUniform *uniform : uniformArray) |
| { |
| if (uniform->isSampler()) |
| continue; |
| |
| unsigned int componentCount = (4 - uniform->registerElement); |
| |
| // we assume that uniforms from structs are arranged in struct order in our uniforms list. |
| // otherwise we would overwrite previously written regions of memory. |
| |
| if (uniform->isReferencedByVertexShader() && mapVS) |
| { |
| memcpy(&mapVS[uniform->vsRegisterIndex][uniform->registerElement], uniform->data, |
| uniform->registerCount * sizeof(float) * componentCount); |
| } |
| |
| if (uniform->isReferencedByFragmentShader() && mapPS) |
| { |
| memcpy(&mapPS[uniform->psRegisterIndex][uniform->registerElement], uniform->data, |
| uniform->registerCount * sizeof(float) * componentCount); |
| } |
| } |
| |
| if (mapVS) |
| { |
| mDeviceContext->Unmap(vertexConstantBuffer->get(), 0); |
| } |
| |
| if (mapPS) |
| { |
| mDeviceContext->Unmap(pixelConstantBuffer->get(), 0); |
| } |
| |
| ID3D11Buffer *appliedVertexConstants = vertexConstantBuffer->get(); |
| if (mCurrentVertexConstantBuffer != reinterpret_cast<uintptr_t>(appliedVertexConstants)) |
| { |
| mDeviceContext->VSSetConstantBuffers( |
| d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DEFAULT_UNIFORM_BLOCK, 1, &appliedVertexConstants); |
| mCurrentVertexConstantBuffer = reinterpret_cast<uintptr_t>(appliedVertexConstants); |
| } |
| |
| ID3D11Buffer *appliedPixelConstants = pixelConstantBuffer->get(); |
| if (mCurrentPixelConstantBuffer != reinterpret_cast<uintptr_t>(appliedPixelConstants)) |
| { |
| mDeviceContext->PSSetConstantBuffers( |
| d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DEFAULT_UNIFORM_BLOCK, 1, &appliedPixelConstants); |
| mCurrentPixelConstantBuffer = reinterpret_cast<uintptr_t>(appliedPixelConstants); |
| } |
| |
| auto *samplerMetadataVS = mStateManager.getVertexSamplerMetadata(); |
| auto *samplerMetadataPS = mStateManager.getPixelSamplerMetadata(); |
| |
| if (!mDriverConstantBufferVS.valid()) |
| { |
| D3D11_BUFFER_DESC constantBufferDescription = {0}; |
| d3d11::InitConstantBufferDesc( |
| &constantBufferDescription, |
| sizeof(dx_VertexConstants11) + samplerMetadataVS->sizeBytes()); |
| ANGLE_TRY(allocateResource(constantBufferDescription, &mDriverConstantBufferVS)); |
| |
| ID3D11Buffer *driverVSConstants = mDriverConstantBufferVS.get(); |
| mDeviceContext->VSSetConstantBuffers(d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DRIVER, 1, |
| &driverVSConstants); |
| } |
| |
| if (!mDriverConstantBufferPS.valid()) |
| { |
| D3D11_BUFFER_DESC constantBufferDescription = {0}; |
| d3d11::InitConstantBufferDesc(&constantBufferDescription, |
| sizeof(dx_PixelConstants11) + samplerMetadataPS->sizeBytes()); |
| ANGLE_TRY(allocateResource(constantBufferDescription, &mDriverConstantBufferPS)); |
| |
| ID3D11Buffer *driverVSConstants = mDriverConstantBufferPS.get(); |
| mDeviceContext->PSSetConstantBuffers(d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DRIVER, 1, |
| &driverVSConstants); |
| } |
| |
| // Sampler metadata and driver constants need to coexist in the same constant buffer to conserve |
| // constant buffer slots. We update both in the constant buffer if needed. |
| const dx_VertexConstants11 &vertexConstants = mStateManager.getVertexConstants(); |
| size_t samplerMetadataReferencedBytesVS = sizeof(SamplerMetadata11::dx_SamplerMetadata) * |
| programD3D.getUsedSamplerRange(gl::SAMPLER_VERTEX); |
| applyDriverConstantsIfNeeded(&mAppliedVertexConstants, vertexConstants, samplerMetadataVS, |
| samplerMetadataReferencedBytesVS, mDriverConstantBufferVS); |
| |
| const dx_PixelConstants11 &pixelConstants = mStateManager.getPixelConstants(); |
| size_t samplerMetadataReferencedBytesPS = sizeof(SamplerMetadata11::dx_SamplerMetadata) * |
| programD3D.getUsedSamplerRange(gl::SAMPLER_PIXEL); |
| applyDriverConstantsIfNeeded(&mAppliedPixelConstants, pixelConstants, samplerMetadataPS, |
| samplerMetadataReferencedBytesPS, mDriverConstantBufferPS); |
| |
| // GSSetConstantBuffers triggers device removal on 9_3, so we should only call it if necessary |
| if (programD3D.usesGeometryShader(drawMode)) |
| { |
| // needed for the point sprite geometry shader |
| ID3D11Buffer *appliedGeometryConstants = mDriverConstantBufferPS.get(); |
| if (mCurrentGeometryConstantBuffer != reinterpret_cast<uintptr_t>(appliedGeometryConstants)) |
| { |
| ASSERT(mDriverConstantBufferPS.valid()); |
| mDeviceContext->GSSetConstantBuffers(0, 1, &appliedGeometryConstants); |
| mCurrentGeometryConstantBuffer = reinterpret_cast<uintptr_t>(appliedGeometryConstants); |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| template <class TShaderConstants> |
| void Renderer11::applyDriverConstantsIfNeeded(TShaderConstants *appliedConstants, |
| const TShaderConstants &constants, |
| SamplerMetadata11 *samplerMetadata, |
| size_t samplerMetadataReferencedBytes, |
| const d3d11::Buffer &driverConstantBuffer) |
| { |
| ASSERT(driverConstantBuffer.valid()); |
| if (memcmp(appliedConstants, &constants, sizeof(TShaderConstants)) != 0 || |
| samplerMetadata->isDirty()) |
| { |
| memcpy(appliedConstants, &constants, sizeof(TShaderConstants)); |
| |
| D3D11_MAPPED_SUBRESOURCE mapping = {0}; |
| HRESULT result = mDeviceContext->Map(driverConstantBuffer.get(), 0, D3D11_MAP_WRITE_DISCARD, |
| 0, &mapping); |
| ASSERT(SUCCEEDED(result)); |
| memcpy(mapping.pData, appliedConstants, sizeof(TShaderConstants)); |
| // Previous buffer contents were discarded, so we need to refresh also the area of the |
| // buffer that isn't used by this program. |
| memcpy(&reinterpret_cast<uint8_t *>(mapping.pData)[sizeof(TShaderConstants)], |
| samplerMetadata->getData(), samplerMetadata->sizeBytes()); |
| mDeviceContext->Unmap(driverConstantBuffer.get(), 0); |
| |
| samplerMetadata->markClean(); |
| } |
| } |
| |
| template void Renderer11::applyDriverConstantsIfNeeded<dx_VertexConstants11>( |
| dx_VertexConstants11 *appliedConstants, |
| const dx_VertexConstants11 &constants, |
| SamplerMetadata11 *samplerMetadata, |
| size_t samplerMetadataReferencedBytes, |
| const d3d11::Buffer &driverConstantBuffer); |
| template void Renderer11::applyDriverConstantsIfNeeded<dx_PixelConstants11>( |
| dx_PixelConstants11 *appliedConstants, |
| const dx_PixelConstants11 &constants, |
| SamplerMetadata11 *samplerMetadata, |
| size_t samplerMetadataReferencedBytes, |
| const d3d11::Buffer &driverConstantBuffer); |
| template void Renderer11::applyDriverConstantsIfNeeded<dx_ComputeConstants11>( |
| dx_ComputeConstants11 *appliedConstants, |
| const dx_ComputeConstants11 &constants, |
| SamplerMetadata11 *samplerMetadata, |
| size_t samplerMetadataReferencedBytes, |
| const d3d11::Buffer &driverConstantBuffer); |
| |
| void Renderer11::markAllStateDirty(const gl::Context *context) |
| { |
| TRACE_EVENT0("gpu.angle", "Renderer11::markAllStateDirty"); |
| |
| mStateManager.invalidateEverything(context); |
| |
| mAppliedTFObject = angle::DirtyPointer; |
| |
| memset(&mAppliedVertexConstants, 0, sizeof(dx_VertexConstants11)); |
| memset(&mAppliedPixelConstants, 0, sizeof(dx_PixelConstants11)); |
| |
| for (unsigned int i = 0; i < gl::IMPLEMENTATION_MAX_VERTEX_SHADER_UNIFORM_BUFFERS; i++) |
| { |
| mCurrentConstantBufferVS[i] = static_cast<unsigned int>(-1); |
| mCurrentConstantBufferVSOffset[i] = 0; |
| mCurrentConstantBufferVSSize[i] = 0; |
| mCurrentConstantBufferPS[i] = static_cast<unsigned int>(-1); |
| mCurrentConstantBufferPSOffset[i] = 0; |
| mCurrentConstantBufferPSSize[i] = 0; |
| } |
| |
| mCurrentVertexConstantBuffer = angle::DirtyPointer; |
| mCurrentPixelConstantBuffer = angle::DirtyPointer; |
| mCurrentGeometryConstantBuffer = angle::DirtyPointer; |
| mCurrentComputeConstantBuffer = angle::DirtyPointer; |
| } |
| |
| void Renderer11::releaseDeviceResources() |
| { |
| mStateManager.deinitialize(); |
| mStateCache.clear(); |
| |
| SafeDelete(mLineLoopIB); |
| SafeDelete(mTriangleFanIB); |
| SafeDelete(mBlit); |
| SafeDelete(mClear); |
| SafeDelete(mTrim); |
| SafeDelete(mPixelTransfer); |
| |
| mDriverConstantBufferVS.reset(); |
| mDriverConstantBufferPS.reset(); |
| mDriverConstantBufferCS.reset(); |
| mSyncQuery.reset(); |
| } |
| |
| // set notify to true to broadcast a message to all contexts of the device loss |
| bool Renderer11::testDeviceLost() |
| { |
| bool isLost = false; |
| |
| if (!mDevice) |
| { |
| return true; |
| } |
| |
| // GetRemovedReason is used to test if the device is removed |
| HRESULT result = mDevice->GetDeviceRemovedReason(); |
| isLost = d3d11::isDeviceLostError(result); |
| |
| if (isLost) |
| { |
| ERR() << "The D3D11 device was removed, " << gl::FmtHR(result); |
| } |
| |
| return isLost; |
| } |
| |
| bool Renderer11::testDeviceResettable() |
| { |
| // determine if the device is resettable by creating a dummy device |
| PFN_D3D11_CREATE_DEVICE D3D11CreateDevice = |
| (PFN_D3D11_CREATE_DEVICE)GetProcAddress(mD3d11Module, "D3D11CreateDevice"); |
| |
| if (D3D11CreateDevice == nullptr) |
| { |
| return false; |
| } |
| |
| ID3D11Device *dummyDevice; |
| D3D_FEATURE_LEVEL dummyFeatureLevel; |
| ID3D11DeviceContext *dummyContext; |
| UINT flags = (mCreateDebugDevice ? D3D11_CREATE_DEVICE_DEBUG : 0); |
| |
| ASSERT(mRequestedDriverType != D3D_DRIVER_TYPE_UNKNOWN); |
| HRESULT result = D3D11CreateDevice( |
| nullptr, mRequestedDriverType, nullptr, flags, mAvailableFeatureLevels.data(), |
| static_cast<unsigned int>(mAvailableFeatureLevels.size()), D3D11_SDK_VERSION, &dummyDevice, |
| &dummyFeatureLevel, &dummyContext); |
| |
| if (!mDevice || FAILED(result)) |
| { |
| return false; |
| } |
| |
| SafeRelease(dummyContext); |
| SafeRelease(dummyDevice); |
| |
| return true; |
| } |
| |
| void Renderer11::release() |
| { |
| RendererD3D::cleanup(); |
| |
| mScratchMemoryBuffer.clear(); |
| |
| if (mAnnotator != nullptr) |
| { |
| gl::UninitializeDebugAnnotations(); |
| SafeDelete(mAnnotator); |
| } |
| |
| releaseDeviceResources(); |
| |
| if (!mCreatedWithDeviceEXT) |
| { |
| // Only delete the device if the Renderer11 owns it |
| // Otherwise we should keep it around in case we try to reinitialize the renderer later |
| SafeDelete(mEGLDevice); |
| } |
| |
| SafeRelease(mDxgiFactory); |
| SafeRelease(mDxgiAdapter); |
| |
| SafeRelease(mDeviceContext1); |
| |
| if (mDeviceContext) |
| { |
| mDeviceContext->ClearState(); |
| mDeviceContext->Flush(); |
| SafeRelease(mDeviceContext); |
| } |
| |
| SafeRelease(mDevice); |
| SafeRelease(mDebug); |
| |
| if (mD3d11Module) |
| { |
| FreeLibrary(mD3d11Module); |
| mD3d11Module = nullptr; |
| } |
| |
| if (mDxgiModule) |
| { |
| FreeLibrary(mDxgiModule); |
| mDxgiModule = nullptr; |
| } |
| |
| if (mDCompModule) |
| { |
| FreeLibrary(mDCompModule); |
| mDCompModule = nullptr; |
| } |
| |
| mCompiler.release(); |
| |
| mSupportsShareHandles.reset(); |
| } |
| |
| bool Renderer11::resetDevice() |
| { |
| // recreate everything |
| release(); |
| egl::Error result = initialize(); |
| |
| if (result.isError()) |
| { |
| ERR() << "Could not reinitialize D3D11 device: " << result; |
| return false; |
| } |
| |
| return true; |
| } |
| |
| std::string Renderer11::getRendererDescription() const |
| { |
| std::ostringstream rendererString; |
| |
| rendererString << mDescription; |
| rendererString << " Direct3D11"; |
| |
| rendererString << " vs_" << getMajorShaderModel() << "_" << getMinorShaderModel() |
| << getShaderModelSuffix(); |
| rendererString << " ps_" << getMajorShaderModel() << "_" << getMinorShaderModel() |
| << getShaderModelSuffix(); |
| |
| return rendererString.str(); |
| } |
| |
| DeviceIdentifier Renderer11::getAdapterIdentifier() const |
| { |
| // Don't use the AdapterLuid here, since that doesn't persist across reboot. |
| DeviceIdentifier deviceIdentifier = {0}; |
| deviceIdentifier.VendorId = mAdapterDescription.VendorId; |
| deviceIdentifier.DeviceId = mAdapterDescription.DeviceId; |
| deviceIdentifier.SubSysId = mAdapterDescription.SubSysId; |
| deviceIdentifier.Revision = mAdapterDescription.Revision; |
| deviceIdentifier.FeatureLevel = static_cast<UINT>(mRenderer11DeviceCaps.featureLevel); |
| |
| return deviceIdentifier; |
| } |
| |
| unsigned int Renderer11::getReservedVertexUniformVectors() const |
| { |
| // Driver uniforms are stored in a separate constant buffer |
| return d3d11_gl::GetReservedVertexUniformVectors(mRenderer11DeviceCaps.featureLevel); |
| } |
| |
| unsigned int Renderer11::getReservedFragmentUniformVectors() const |
| { |
| // Driver uniforms are stored in a separate constant buffer |
| return d3d11_gl::GetReservedFragmentUniformVectors(mRenderer11DeviceCaps.featureLevel); |
| } |
| |
| unsigned int Renderer11::getReservedVertexUniformBuffers() const |
| { |
| // we reserve one buffer for the application uniforms, and one for driver uniforms |
| return 2; |
| } |
| |
| unsigned int Renderer11::getReservedFragmentUniformBuffers() const |
| { |
| // we reserve one buffer for the application uniforms, and one for driver uniforms |
| return 2; |
| } |
| |
| d3d11::ANGLED3D11DeviceType Renderer11::getDeviceType() const |
| { |
| if (mCreatedWithDeviceEXT) |
| { |
| return d3d11::GetDeviceType(mDevice); |
| } |
| |
| if ((mRequestedDriverType == D3D_DRIVER_TYPE_SOFTWARE) || |
| (mRequestedDriverType == D3D_DRIVER_TYPE_REFERENCE) || |
| (mRequestedDriverType == D3D_DRIVER_TYPE_NULL)) |
| { |
| return d3d11::ANGLE_D3D11_DEVICE_TYPE_SOFTWARE_REF_OR_NULL; |
| } |
| |
| if (mRequestedDriverType == D3D_DRIVER_TYPE_WARP) |
| { |
| return d3d11::ANGLE_D3D11_DEVICE_TYPE_WARP; |
| } |
| |
| return d3d11::ANGLE_D3D11_DEVICE_TYPE_HARDWARE; |
| } |
| |
| bool Renderer11::getShareHandleSupport() const |
| { |
| if (mSupportsShareHandles.valid()) |
| { |
| return mSupportsShareHandles.value(); |
| } |
| |
| // We only currently support share handles with BGRA surfaces, because |
| // chrome needs BGRA. Once chrome fixes this, we should always support them. |
| if (!getNativeExtensions().textureFormatBGRA8888) |
| { |
| mSupportsShareHandles = false; |
| return false; |
| } |
| |
| // PIX doesn't seem to support using share handles, so disable them. |
| if (gl::DebugAnnotationsActive()) |
| { |
| mSupportsShareHandles = false; |
| return false; |
| } |
| |
| // Also disable share handles on Feature Level 9_3, since it doesn't support share handles on |
| // RGBA8 textures/swapchains. |
| if (mRenderer11DeviceCaps.featureLevel <= D3D_FEATURE_LEVEL_9_3) |
| { |
| mSupportsShareHandles = false; |
| return false; |
| } |
| |
| // Find out which type of D3D11 device the Renderer11 is using |
| d3d11::ANGLED3D11DeviceType deviceType = getDeviceType(); |
| if (deviceType == d3d11::ANGLE_D3D11_DEVICE_TYPE_UNKNOWN) |
| { |
| mSupportsShareHandles = false; |
| return false; |
| } |
| |
| if (deviceType == d3d11::ANGLE_D3D11_DEVICE_TYPE_SOFTWARE_REF_OR_NULL) |
| { |
| // Software/Reference/NULL devices don't support share handles |
| mSupportsShareHandles = false; |
| return false; |
| } |
| |
| if (deviceType == d3d11::ANGLE_D3D11_DEVICE_TYPE_WARP) |
| { |
| #ifndef ANGLE_ENABLE_WINDOWS_STORE |
| if (!IsWindows8OrGreater()) |
| { |
| // WARP on Windows 7 doesn't support shared handles |
| mSupportsShareHandles = false; |
| return false; |
| } |
| #endif // ANGLE_ENABLE_WINDOWS_STORE |
| |
| // WARP on Windows 8.0+ supports shared handles when shared with another WARP device |
| // TODO: allow applications to query for HARDWARE or WARP-specific share handles, |
| // to prevent them trying to use a WARP share handle with an a HW device (or |
| // vice-versa) |
| // e.g. by creating EGL_D3D11_[HARDWARE/WARP]_DEVICE_SHARE_HANDLE_ANGLE |
| mSupportsShareHandles = true; |
| return true; |
| } |
| |
| ASSERT(mCreatedWithDeviceEXT || mRequestedDriverType == D3D_DRIVER_TYPE_HARDWARE); |
| mSupportsShareHandles = true; |
| return true; |
| } |
| |
| bool Renderer11::getNV12TextureSupport() const |
| { |
| HRESULT result; |
| UINT formatSupport; |
| result = mDevice->CheckFormatSupport(DXGI_FORMAT_NV12, &formatSupport); |
| if (result == E_FAIL) |
| { |
| return false; |
| } |
| return (formatSupport & D3D11_FORMAT_SUPPORT_TEXTURE2D) != 0; |
| } |
| |
| int Renderer11::getMajorShaderModel() const |
| { |
| switch (mRenderer11DeviceCaps.featureLevel) |
| { |
| case D3D_FEATURE_LEVEL_11_0: |
| return D3D11_SHADER_MAJOR_VERSION; // 5 |
| case D3D_FEATURE_LEVEL_10_1: |
| return D3D10_1_SHADER_MAJOR_VERSION; // 4 |
| case D3D_FEATURE_LEVEL_10_0: |
| return D3D10_SHADER_MAJOR_VERSION; // 4 |
| case D3D_FEATURE_LEVEL_9_3: |
| return D3D10_SHADER_MAJOR_VERSION; // 4 |
| default: |
| UNREACHABLE(); |
| return 0; |
| } |
| } |
| |
| int Renderer11::getMinorShaderModel() const |
| { |
| switch (mRenderer11DeviceCaps.featureLevel) |
| { |
| case D3D_FEATURE_LEVEL_11_0: |
| return D3D11_SHADER_MINOR_VERSION; // 0 |
| case D3D_FEATURE_LEVEL_10_1: |
| return D3D10_1_SHADER_MINOR_VERSION; // 1 |
| case D3D_FEATURE_LEVEL_10_0: |
| return D3D10_SHADER_MINOR_VERSION; // 0 |
| case D3D_FEATURE_LEVEL_9_3: |
| return D3D10_SHADER_MINOR_VERSION; // 0 |
| default: |
| UNREACHABLE(); |
| return 0; |
| } |
| } |
| |
| std::string Renderer11::getShaderModelSuffix() const |
| { |
| switch (mRenderer11DeviceCaps.featureLevel) |
| { |
| case D3D_FEATURE_LEVEL_11_0: |
| return ""; |
| case D3D_FEATURE_LEVEL_10_1: |
| return ""; |
| case D3D_FEATURE_LEVEL_10_0: |
| return ""; |
| case D3D_FEATURE_LEVEL_9_3: |
| return "_level_9_3"; |
| default: |
| UNREACHABLE(); |
| return ""; |
| } |
| } |
| |
| const angle::WorkaroundsD3D &RendererD3D::getWorkarounds() const |
| { |
| if (!mWorkaroundsInitialized) |
| { |
| mWorkarounds = generateWorkarounds(); |
| mWorkaroundsInitialized = true; |
| } |
| |
| return mWorkarounds; |
| } |
| |
| gl::Error Renderer11::copyImageInternal(const gl::Context *context, |
| const gl::Framebuffer *framebuffer, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| RenderTargetD3D *destRenderTarget) |
| { |
| const gl::FramebufferAttachment *colorAttachment = framebuffer->getReadColorbuffer(); |
| ASSERT(colorAttachment); |
| |
| RenderTarget11 *sourceRenderTarget = nullptr; |
| ANGLE_TRY(colorAttachment->getRenderTarget(context, &sourceRenderTarget)); |
| ASSERT(sourceRenderTarget); |
| |
| const d3d11::SharedSRV &source = sourceRenderTarget->getBlitShaderResourceView(); |
| ASSERT(source.valid()); |
| |
| const d3d11::RenderTargetView &dest = |
| GetAs<RenderTarget11>(destRenderTarget)->getRenderTargetView(); |
| ASSERT(dest.valid()); |
| |
| gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1); |
| gl::Extents sourceSize(sourceRenderTarget->getWidth(), sourceRenderTarget->getHeight(), 1); |
| |
| const bool invertSource = UsePresentPathFast(this, colorAttachment); |
| if (invertSource) |
| { |
| sourceArea.y = sourceSize.height - sourceRect.y; |
| sourceArea.height = -sourceArea.height; |
| } |
| |
| gl::Box destArea(destOffset.x, destOffset.y, 0, sourceRect.width, sourceRect.height, 1); |
| gl::Extents destSize(destRenderTarget->getWidth(), destRenderTarget->getHeight(), 1); |
| |
| // Use nearest filtering because source and destination are the same size for the direct copy. |
| // Convert to the unsized format before calling copyTexture. |
| GLenum sourceFormat = colorAttachment->getFormat().info->format; |
| ANGLE_TRY(mBlit->copyTexture(context, source, sourceArea, sourceSize, sourceFormat, dest, |
| destArea, destSize, nullptr, gl::GetUnsizedFormat(destFormat), |
| GL_NEAREST, false, false, false)); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyImage2D(const gl::Context *context, |
| const gl::Framebuffer *framebuffer, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| TextureStorage *storage, |
| GLint level) |
| { |
| TextureStorage11_2D *storage11 = GetAs<TextureStorage11_2D>(storage); |
| ASSERT(storage11); |
| |
| gl::ImageIndex index = gl::ImageIndex::Make2D(level); |
| RenderTargetD3D *destRenderTarget = nullptr; |
| ANGLE_TRY(storage11->getRenderTarget(context, index, &destRenderTarget)); |
| ASSERT(destRenderTarget); |
| |
| ANGLE_TRY(copyImageInternal(context, framebuffer, sourceRect, destFormat, destOffset, |
| destRenderTarget)); |
| |
| storage11->markLevelDirty(level); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyImageCube(const gl::Context *context, |
| const gl::Framebuffer *framebuffer, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| TextureStorage *storage, |
| GLenum target, |
| GLint level) |
| { |
| TextureStorage11_Cube *storage11 = GetAs<TextureStorage11_Cube>(storage); |
| ASSERT(storage11); |
| |
| gl::ImageIndex index = gl::ImageIndex::MakeCube(target, level); |
| RenderTargetD3D *destRenderTarget = nullptr; |
| ANGLE_TRY(storage11->getRenderTarget(context, index, &destRenderTarget)); |
| ASSERT(destRenderTarget); |
| |
| ANGLE_TRY(copyImageInternal(context, framebuffer, sourceRect, destFormat, destOffset, |
| destRenderTarget)); |
| |
| storage11->markLevelDirty(level); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyImage3D(const gl::Context *context, |
| const gl::Framebuffer *framebuffer, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| TextureStorage *storage, |
| GLint level) |
| { |
| TextureStorage11_3D *storage11 = GetAs<TextureStorage11_3D>(storage); |
| ASSERT(storage11); |
| |
| gl::ImageIndex index = gl::ImageIndex::Make3D(level, destOffset.z); |
| RenderTargetD3D *destRenderTarget = nullptr; |
| ANGLE_TRY(storage11->getRenderTarget(context, index, &destRenderTarget)); |
| ASSERT(destRenderTarget); |
| |
| ANGLE_TRY(copyImageInternal(context, framebuffer, sourceRect, destFormat, destOffset, |
| destRenderTarget)); |
| |
| storage11->markLevelDirty(level); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyImage2DArray(const gl::Context *context, |
| const gl::Framebuffer *framebuffer, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| TextureStorage *storage, |
| GLint level) |
| { |
| TextureStorage11_2DArray *storage11 = GetAs<TextureStorage11_2DArray>(storage); |
| ASSERT(storage11); |
| |
| gl::ImageIndex index = gl::ImageIndex::Make2DArray(level, destOffset.z); |
| RenderTargetD3D *destRenderTarget = nullptr; |
| ANGLE_TRY(storage11->getRenderTarget(context, index, &destRenderTarget)); |
| ASSERT(destRenderTarget); |
| |
| ANGLE_TRY(copyImageInternal(context, framebuffer, sourceRect, destFormat, destOffset, |
| destRenderTarget)); |
| storage11->markLevelDirty(level); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyTexture(const gl::Context *context, |
| const gl::Texture *source, |
| GLint sourceLevel, |
| const gl::Rectangle &sourceRect, |
| GLenum destFormat, |
| const gl::Offset &destOffset, |
| TextureStorage *storage, |
| GLenum destTarget, |
| GLint destLevel, |
| bool unpackFlipY, |
| bool unpackPremultiplyAlpha, |
| bool unpackUnmultiplyAlpha) |
| { |
| TextureD3D *sourceD3D = GetImplAs<TextureD3D>(source); |
| |
| TextureStorage *sourceStorage = nullptr; |
| ANGLE_TRY(sourceD3D->getNativeTexture(context, &sourceStorage)); |
| |
| TextureStorage11_2D *sourceStorage11 = GetAs<TextureStorage11_2D>(sourceStorage); |
| ASSERT(sourceStorage11); |
| |
| TextureStorage11 *destStorage11 = GetAs<TextureStorage11>(storage); |
| ASSERT(destStorage11); |
| |
| // Check for fast path where a CopySubresourceRegion can be used. |
| if (unpackPremultiplyAlpha == unpackUnmultiplyAlpha && !unpackFlipY && |
| source->getFormat(GL_TEXTURE_2D, sourceLevel).info->format == destFormat && |
| sourceStorage11->getFormatSet().texFormat == destStorage11->getFormatSet().texFormat) |
| { |
| const TextureHelper11 *sourceResource = nullptr; |
| ANGLE_TRY(sourceStorage11->getResource(context, &sourceResource)); |
| |
| gl::ImageIndex sourceIndex = gl::ImageIndex::Make2D(sourceLevel); |
| UINT sourceSubresource = sourceStorage11->getSubresourceIndex(sourceIndex); |
| |
| const TextureHelper11 *destResource = nullptr; |
| ANGLE_TRY(destStorage11->getResource(context, &destResource)); |
| |
| gl::ImageIndex destIndex = gl::ImageIndex::MakeGeneric(destTarget, destLevel); |
| UINT destSubresource = destStorage11->getSubresourceIndex(destIndex); |
| |
| D3D11_BOX sourceBox{ |
| static_cast<UINT>(sourceRect.x), |
| static_cast<UINT>(sourceRect.y), |
| 0u, |
| static_cast<UINT>(sourceRect.x + sourceRect.width), |
| static_cast<UINT>(sourceRect.y + sourceRect.height), |
| 1u, |
| }; |
| |
| mDeviceContext->CopySubresourceRegion(destResource->get(), destSubresource, destOffset.x, |
| destOffset.y, destOffset.z, sourceResource->get(), |
| sourceSubresource, &sourceBox); |
| } |
| else |
| { |
| const d3d11::SharedSRV *sourceSRV = nullptr; |
| ANGLE_TRY(sourceStorage11->getSRVLevels(context, sourceLevel, sourceLevel, &sourceSRV)); |
| |
| gl::ImageIndex destIndex = gl::ImageIndex::MakeGeneric(destTarget, destLevel); |
| RenderTargetD3D *destRenderTargetD3D = nullptr; |
| ANGLE_TRY(destStorage11->getRenderTarget(context, destIndex, &destRenderTargetD3D)); |
| |
| RenderTarget11 *destRenderTarget11 = GetAs<RenderTarget11>(destRenderTargetD3D); |
| |
| const d3d11::RenderTargetView &destRTV = destRenderTarget11->getRenderTargetView(); |
| ASSERT(destRTV.valid()); |
| |
| gl::Box sourceArea(sourceRect.x, sourceRect.y, 0, sourceRect.width, sourceRect.height, 1); |
| gl::Extents sourceSize( |
| static_cast<int>(source->getWidth(source->getTarget(), sourceLevel)), |
| static_cast<int>(source->getHeight(source->getTarget(), sourceLevel)), 1); |
| if (unpackFlipY) |
| { |
| sourceArea.y += sourceArea.height; |
| sourceArea.height = -sourceArea.height; |
| } |
| |
| gl::Box destArea(destOffset.x, destOffset.y, 0, sourceRect.width, sourceRect.height, 1); |
| gl::Extents destSize(destRenderTarget11->getWidth(), destRenderTarget11->getHeight(), 1); |
| |
| // Use nearest filtering because source and destination are the same size for the direct |
| // copy |
| GLenum sourceFormat = source->getFormat(GL_TEXTURE_2D, sourceLevel).info->format; |
| ANGLE_TRY(mBlit->copyTexture(context, *sourceSRV, sourceArea, sourceSize, sourceFormat, |
| destRTV, destArea, destSize, nullptr, destFormat, GL_NEAREST, |
| false, unpackPremultiplyAlpha, unpackUnmultiplyAlpha)); |
| } |
| |
| destStorage11->markLevelDirty(destLevel); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyCompressedTexture(const gl::Context *context, |
| const gl::Texture *source, |
| GLint sourceLevel, |
| TextureStorage *storage, |
| GLint destLevel) |
| { |
| TextureStorage11_2D *destStorage11 = GetAs<TextureStorage11_2D>(storage); |
| ASSERT(destStorage11); |
| |
| const TextureHelper11 *destResource = nullptr; |
| ANGLE_TRY(destStorage11->getResource(context, &destResource)); |
| |
| gl::ImageIndex destIndex = gl::ImageIndex::Make2D(destLevel); |
| UINT destSubresource = destStorage11->getSubresourceIndex(destIndex); |
| |
| TextureD3D *sourceD3D = GetImplAs<TextureD3D>(source); |
| ASSERT(sourceD3D); |
| |
| TextureStorage *sourceStorage = nullptr; |
| ANGLE_TRY(sourceD3D->getNativeTexture(context, &sourceStorage)); |
| |
| TextureStorage11_2D *sourceStorage11 = GetAs<TextureStorage11_2D>(sourceStorage); |
| ASSERT(sourceStorage11); |
| |
| const TextureHelper11 *sourceResource = nullptr; |
| ANGLE_TRY(sourceStorage11->getResource(context, &sourceResource)); |
| |
| gl::ImageIndex sourceIndex = gl::ImageIndex::Make2D(sourceLevel); |
| UINT sourceSubresource = sourceStorage11->getSubresourceIndex(sourceIndex); |
| |
| mDeviceContext->CopySubresourceRegion(destResource->get(), destSubresource, 0, 0, 0, |
| sourceResource->get(), sourceSubresource, nullptr); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::createRenderTarget(int width, |
| int height, |
| GLenum format, |
| GLsizei samples, |
| RenderTargetD3D **outRT) |
| { |
| const d3d11::Format &formatInfo = d3d11::Format::Get(format, mRenderer11DeviceCaps); |
| |
| const gl::TextureCaps &textureCaps = getNativeTextureCaps().get(format); |
| GLuint supportedSamples = textureCaps.getNearestSamples(samples); |
| |
| if (width > 0 && height > 0) |
| { |
| // Create texture resource |
| D3D11_TEXTURE2D_DESC desc; |
| desc.Width = width; |
| desc.Height = height; |
| desc.MipLevels = 1; |
| desc.ArraySize = 1; |
| desc.Format = formatInfo.texFormat; |
| desc.SampleDesc.Count = (supportedSamples == 0) ? 1 : supportedSamples; |
| desc.SampleDesc.Quality = 0; |
| desc.Usage = D3D11_USAGE_DEFAULT; |
| desc.CPUAccessFlags = 0; |
| desc.MiscFlags = 0; |
| |
| // If a rendertarget or depthstencil format exists for this texture format, |
| // we'll flag it to allow binding that way. Shader resource views are a little |
| // more complicated. |
| bool bindRTV = false, bindDSV = false, bindSRV = false; |
| bindRTV = (formatInfo.rtvFormat != DXGI_FORMAT_UNKNOWN); |
| bindDSV = (formatInfo.dsvFormat != DXGI_FORMAT_UNKNOWN); |
| bindSRV = (formatInfo.srvFormat != DXGI_FORMAT_UNKNOWN); |
| |
| // D3D feature level 10.0 no longer allows creation of textures with both the bind SRV and |
| // DSV flags when multisampled. crbug.com/656989 |
| bool supportsMultisampledDepthStencilSRVs = |
| mRenderer11DeviceCaps.featureLevel > D3D_FEATURE_LEVEL_10_0; |
| bool isMultisampledDepthStencil = bindDSV && desc.SampleDesc.Count > 1; |
| if (isMultisampledDepthStencil && !supportsMultisampledDepthStencilSRVs) |
| { |
| bindSRV = false; |
| } |
| |
| desc.BindFlags = (bindRTV ? D3D11_BIND_RENDER_TARGET : 0) | |
| (bindDSV ? D3D11_BIND_DEPTH_STENCIL : 0) | |
| (bindSRV ? D3D11_BIND_SHADER_RESOURCE : 0); |
| |
| // The format must be either an RTV or a DSV |
| ASSERT(bindRTV != bindDSV); |
| |
| TextureHelper11 texture; |
| ANGLE_TRY(allocateTexture(desc, formatInfo, &texture)); |
| |
| d3d11::SharedSRV srv; |
| d3d11::SharedSRV blitSRV; |
| if (bindSRV) |
| { |
| D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc; |
| srvDesc.Format = formatInfo.srvFormat; |
| srvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_SRV_DIMENSION_TEXTURE2D |
| : D3D11_SRV_DIMENSION_TEXTURE2DMS; |
| srvDesc.Texture2D.MostDetailedMip = 0; |
| srvDesc.Texture2D.MipLevels = 1; |
| |
| ANGLE_TRY(allocateResource(srvDesc, texture.get(), &srv)); |
| |
| if (formatInfo.blitSRVFormat != formatInfo.srvFormat) |
| { |
| D3D11_SHADER_RESOURCE_VIEW_DESC blitSRVDesc; |
| blitSRVDesc.Format = formatInfo.blitSRVFormat; |
| blitSRVDesc.ViewDimension = (supportedSamples == 0) |
| ? D3D11_SRV_DIMENSION_TEXTURE2D |
| : D3D11_SRV_DIMENSION_TEXTURE2DMS; |
| blitSRVDesc.Texture2D.MostDetailedMip = 0; |
| blitSRVDesc.Texture2D.MipLevels = 1; |
| |
| ANGLE_TRY(allocateResource(blitSRVDesc, texture.get(), &blitSRV)); |
| } |
| else |
| { |
| blitSRV = srv.makeCopy(); |
| } |
| } |
| |
| if (bindDSV) |
| { |
| D3D11_DEPTH_STENCIL_VIEW_DESC dsvDesc; |
| dsvDesc.Format = formatInfo.dsvFormat; |
| dsvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_DSV_DIMENSION_TEXTURE2D |
| : D3D11_DSV_DIMENSION_TEXTURE2DMS; |
| dsvDesc.Texture2D.MipSlice = 0; |
| dsvDesc.Flags = 0; |
| |
| d3d11::DepthStencilView dsv; |
| ANGLE_TRY(allocateResource(dsvDesc, texture.get(), &dsv)); |
| |
| *outRT = new TextureRenderTarget11(std::move(dsv), texture, srv, format, formatInfo, |
| width, height, 1, supportedSamples); |
| } |
| else if (bindRTV) |
| { |
| D3D11_RENDER_TARGET_VIEW_DESC rtvDesc; |
| rtvDesc.Format = formatInfo.rtvFormat; |
| rtvDesc.ViewDimension = (supportedSamples == 0) ? D3D11_RTV_DIMENSION_TEXTURE2D |
| : D3D11_RTV_DIMENSION_TEXTURE2DMS; |
| rtvDesc.Texture2D.MipSlice = 0; |
| |
| d3d11::RenderTargetView rtv; |
| ANGLE_TRY(allocateResource(rtvDesc, texture.get(), &rtv)); |
| |
| if (formatInfo.dataInitializerFunction != nullptr) |
| { |
| const float clearValues[4] = {0.0f, 0.0f, 0.0f, 1.0f}; |
| mDeviceContext->ClearRenderTargetView(rtv.get(), clearValues); |
| } |
| |
| *outRT = new TextureRenderTarget11(std::move(rtv), texture, srv, blitSRV, format, |
| formatInfo, width, height, 1, supportedSamples); |
| } |
| else |
| { |
| UNREACHABLE(); |
| } |
| } |
| else |
| { |
| *outRT = new TextureRenderTarget11(d3d11::RenderTargetView(), TextureHelper11(), |
| d3d11::SharedSRV(), d3d11::SharedSRV(), format, |
| d3d11::Format::Get(GL_NONE, mRenderer11DeviceCaps), |
| width, height, 1, supportedSamples); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::createRenderTargetCopy(RenderTargetD3D *source, RenderTargetD3D **outRT) |
| { |
| ASSERT(source != nullptr); |
| |
| RenderTargetD3D *newRT = nullptr; |
| ANGLE_TRY(createRenderTarget(source->getWidth(), source->getHeight(), |
| source->getInternalFormat(), source->getSamples(), &newRT)); |
| |
| RenderTarget11 *source11 = GetAs<RenderTarget11>(source); |
| RenderTarget11 *dest11 = GetAs<RenderTarget11>(newRT); |
| |
| mDeviceContext->CopySubresourceRegion(dest11->getTexture().get(), dest11->getSubresourceIndex(), |
| 0, 0, 0, source11->getTexture().get(), |
| source11->getSubresourceIndex(), nullptr); |
| *outRT = newRT; |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::loadExecutable(const uint8_t *function, |
| size_t length, |
| ShaderType type, |
| const std::vector<D3DVarying> &streamOutVaryings, |
| bool separatedOutputBuffers, |
| ShaderExecutableD3D **outExecutable) |
| { |
| ShaderData shaderData(function, length); |
| |
| switch (type) |
| { |
| case SHADER_VERTEX: |
| { |
| d3d11::VertexShader vertexShader; |
| d3d11::GeometryShader streamOutShader; |
| ANGLE_TRY(allocateResource(shaderData, &vertexShader)); |
| |
| if (!streamOutVaryings.empty()) |
| { |
| std::vector<D3D11_SO_DECLARATION_ENTRY> soDeclaration; |
| soDeclaration.reserve(streamOutVaryings.size()); |
| |
| for (const auto &streamOutVarying : streamOutVaryings) |
| { |
| D3D11_SO_DECLARATION_ENTRY entry = {0}; |
| entry.Stream = 0; |
| entry.SemanticName = streamOutVarying.semanticName.c_str(); |
| entry.SemanticIndex = streamOutVarying.semanticIndex; |
| entry.StartComponent = 0; |
| entry.ComponentCount = static_cast<BYTE>(streamOutVarying.componentCount); |
| entry.OutputSlot = static_cast<BYTE>( |
| (separatedOutputBuffers ? streamOutVarying.outputSlot : 0)); |
| soDeclaration.push_back(entry); |
| } |
| |
| ANGLE_TRY(allocateResource(shaderData, &soDeclaration, &streamOutShader)); |
| } |
| |
| *outExecutable = new ShaderExecutable11(function, length, std::move(vertexShader), |
| std::move(streamOutShader)); |
| } |
| break; |
| case SHADER_PIXEL: |
| { |
| d3d11::PixelShader pixelShader; |
| ANGLE_TRY(allocateResource(shaderData, &pixelShader)); |
| *outExecutable = new ShaderExecutable11(function, length, std::move(pixelShader)); |
| } |
| break; |
| case SHADER_GEOMETRY: |
| { |
| d3d11::GeometryShader geometryShader; |
| ANGLE_TRY(allocateResource(shaderData, &geometryShader)); |
| *outExecutable = new ShaderExecutable11(function, length, std::move(geometryShader)); |
| } |
| break; |
| case SHADER_COMPUTE: |
| { |
| d3d11::ComputeShader computeShader; |
| ANGLE_TRY(allocateResource(shaderData, &computeShader)); |
| *outExecutable = new ShaderExecutable11(function, length, std::move(computeShader)); |
| } |
| break; |
| default: |
| UNREACHABLE(); |
| return gl::InternalError(); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::compileToExecutable(gl::InfoLog &infoLog, |
| const std::string &shaderHLSL, |
| ShaderType type, |
| const std::vector<D3DVarying> &streamOutVaryings, |
| bool separatedOutputBuffers, |
| const angle::CompilerWorkaroundsD3D &workarounds, |
| ShaderExecutableD3D **outExectuable) |
| { |
| std::stringstream profileStream; |
| |
| switch (type) |
| { |
| case SHADER_VERTEX: |
| profileStream << "vs"; |
| break; |
| case SHADER_PIXEL: |
| profileStream << "ps"; |
| break; |
| case SHADER_GEOMETRY: |
| profileStream << "gs"; |
| break; |
| case SHADER_COMPUTE: |
| profileStream << "cs"; |
| break; |
| default: |
| UNREACHABLE(); |
| return gl::InternalError(); |
| } |
| |
| profileStream << "_" << getMajorShaderModel() << "_" << getMinorShaderModel() |
| << getShaderModelSuffix(); |
| std::string profile = profileStream.str(); |
| |
| UINT flags = D3DCOMPILE_OPTIMIZATION_LEVEL2; |
| |
| if (gl::DebugAnnotationsActive()) |
| { |
| #ifndef NDEBUG |
| flags = D3DCOMPILE_SKIP_OPTIMIZATION; |
| #endif |
| |
| flags |= D3DCOMPILE_DEBUG; |
| } |
| |
| if (workarounds.enableIEEEStrictness) |
| flags |= D3DCOMPILE_IEEE_STRICTNESS; |
| |
| // Sometimes D3DCompile will fail with the default compilation flags for complicated shaders |
| // when it would otherwise pass with alternative options. |
| // Try the default flags first and if compilation fails, try some alternatives. |
| std::vector<CompileConfig> configs; |
| configs.push_back(CompileConfig(flags, "default")); |
| configs.push_back(CompileConfig(flags | D3DCOMPILE_SKIP_VALIDATION, "skip validation")); |
| configs.push_back(CompileConfig(flags | D3DCOMPILE_SKIP_OPTIMIZATION, "skip optimization")); |
| |
| if (getMajorShaderModel() == 4 && getShaderModelSuffix() != "") |
| { |
| // Some shaders might cause a "blob content mismatch between level9 and d3d10 shader". |
| // e.g. dEQP-GLES2.functional.shaders.struct.local.loop_nested_struct_array_*. |
| // Using the [unroll] directive works around this, as does this D3DCompile flag. |
| configs.push_back( |
| CompileConfig(flags | D3DCOMPILE_AVOID_FLOW_CONTROL, "avoid flow control")); |
| } |
| |
| D3D_SHADER_MACRO loopMacros[] = {{"ANGLE_ENABLE_LOOP_FLATTEN", "1"}, {0, 0}}; |
| |
| // TODO(jmadill): Use ComPtr? |
| ID3DBlob *binary = nullptr; |
| std::string debugInfo; |
| ANGLE_TRY(mCompiler.compileToBinary(infoLog, shaderHLSL, profile, configs, loopMacros, &binary, |
| &debugInfo)); |
| |
| // It's possible that binary is NULL if the compiler failed in all configurations. Set the |
| // executable to NULL and return GL_NO_ERROR to signify that there was a link error but the |
| // internal state is still OK. |
| if (!binary) |
| { |
| *outExectuable = nullptr; |
| return gl::NoError(); |
| } |
| |
| gl::Error error = loadExecutable(reinterpret_cast<const uint8_t *>(binary->GetBufferPointer()), |
| binary->GetBufferSize(), type, streamOutVaryings, |
| separatedOutputBuffers, outExectuable); |
| |
| SafeRelease(binary); |
| if (error.isError()) |
| { |
| return error; |
| } |
| |
| if (!debugInfo.empty()) |
| { |
| (*outExectuable)->appendDebugInfo(debugInfo); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::ensureHLSLCompilerInitialized() |
| { |
| return mCompiler.ensureInitialized(); |
| } |
| |
| UniformStorageD3D *Renderer11::createUniformStorage(size_t storageSize) |
| { |
| return new UniformStorage11(storageSize); |
| } |
| |
| VertexBuffer *Renderer11::createVertexBuffer() |
| { |
| return new VertexBuffer11(this); |
| } |
| |
| IndexBuffer *Renderer11::createIndexBuffer() |
| { |
| return new IndexBuffer11(this); |
| } |
| |
| StreamProducerImpl *Renderer11::createStreamProducerD3DTextureNV12( |
| egl::Stream::ConsumerType consumerType, |
| const egl::AttributeMap &attribs) |
| { |
| return new StreamProducerNV12(this); |
| } |
| |
| bool Renderer11::supportsFastCopyBufferToTexture(GLenum internalFormat) const |
| { |
| ASSERT(getNativeExtensions().pixelBufferObject); |
| |
| const gl::InternalFormat &internalFormatInfo = gl::GetSizedInternalFormatInfo(internalFormat); |
| const d3d11::Format &d3d11FormatInfo = |
| d3d11::Format::Get(internalFormat, mRenderer11DeviceCaps); |
| |
| // sRGB formats do not work with D3D11 buffer SRVs |
| if (internalFormatInfo.colorEncoding == GL_SRGB) |
| { |
| return false; |
| } |
| |
| // We cannot support direct copies to non-color-renderable formats |
| if (d3d11FormatInfo.rtvFormat == DXGI_FORMAT_UNKNOWN) |
| { |
| return false; |
| } |
| |
| // We skip all 3-channel formats since sometimes format support is missing |
| if (internalFormatInfo.componentCount == 3) |
| { |
| return false; |
| } |
| |
| // We don't support formats which we can't represent without conversion |
| if (d3d11FormatInfo.format().glInternalFormat != internalFormat) |
| { |
| return false; |
| } |
| |
| // Buffer SRV creation for this format was not working on Windows 10. |
| if (d3d11FormatInfo.texFormat == DXGI_FORMAT_B5G5R5A1_UNORM) |
| { |
| return false; |
| } |
| |
| // This format is not supported as a buffer SRV. |
| if (d3d11FormatInfo.texFormat == DXGI_FORMAT_A8_UNORM) |
| { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| gl::Error Renderer11::fastCopyBufferToTexture(const gl::Context *context, |
| const gl::PixelUnpackState &unpack, |
| unsigned int offset, |
| RenderTargetD3D *destRenderTarget, |
| GLenum destinationFormat, |
| GLenum sourcePixelsType, |
| const gl::Box &destArea) |
| { |
| ASSERT(supportsFastCopyBufferToTexture(destinationFormat)); |
| return mPixelTransfer->copyBufferToTexture(context, unpack, offset, destRenderTarget, |
| destinationFormat, sourcePixelsType, destArea); |
| } |
| |
| ImageD3D *Renderer11::createImage() |
| { |
| return new Image11(this); |
| } |
| |
| gl::Error Renderer11::generateMipmap(const gl::Context *context, ImageD3D *dest, ImageD3D *src) |
| { |
| Image11 *dest11 = GetAs<Image11>(dest); |
| Image11 *src11 = GetAs<Image11>(src); |
| return Image11::GenerateMipmap(context, dest11, src11, mRenderer11DeviceCaps); |
| } |
| |
| gl::Error Renderer11::generateMipmapUsingD3D(const gl::Context *context, |
| TextureStorage *storage, |
| const gl::TextureState &textureState) |
| { |
| TextureStorage11 *storage11 = GetAs<TextureStorage11>(storage); |
| |
| ASSERT(storage11->isRenderTarget()); |
| ASSERT(storage11->supportsNativeMipmapFunction()); |
| |
| const d3d11::SharedSRV *srv = nullptr; |
| ANGLE_TRY(storage11->getSRVLevels(context, textureState.getEffectiveBaseLevel(), |
| textureState.getEffectiveMaxLevel(), &srv)); |
| |
| mDeviceContext->GenerateMips(srv->get()); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::copyImage(const gl::Context *context, |
| ImageD3D *dest, |
| ImageD3D *source, |
| const gl::Rectangle &sourceRect, |
| const gl::Offset &destOffset, |
| bool unpackFlipY, |
| bool unpackPremultiplyAlpha, |
| bool unpackUnmultiplyAlpha) |
| { |
| Image11 *dest11 = GetAs<Image11>(dest); |
| Image11 *src11 = GetAs<Image11>(source); |
| return Image11::CopyImage(context, dest11, src11, sourceRect, destOffset, unpackFlipY, |
| unpackPremultiplyAlpha, unpackUnmultiplyAlpha, mRenderer11DeviceCaps); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorage2D(SwapChainD3D *swapChain) |
| { |
| SwapChain11 *swapChain11 = GetAs<SwapChain11>(swapChain); |
| return new TextureStorage11_2D(this, swapChain11); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorageEGLImage(EGLImageD3D *eglImage, |
| RenderTargetD3D *renderTargetD3D) |
| { |
| return new TextureStorage11_EGLImage(this, eglImage, GetAs<RenderTarget11>(renderTargetD3D)); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorageExternal( |
| egl::Stream *stream, |
| const egl::Stream::GLTextureDescription &desc) |
| { |
| return new TextureStorage11_External(this, stream, desc); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorage2D(GLenum internalformat, |
| bool renderTarget, |
| GLsizei width, |
| GLsizei height, |
| int levels, |
| bool hintLevelZeroOnly) |
| { |
| return new TextureStorage11_2D(this, internalformat, renderTarget, width, height, levels, |
| hintLevelZeroOnly); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorageCube(GLenum internalformat, |
| bool renderTarget, |
| int size, |
| int levels, |
| bool hintLevelZeroOnly) |
| { |
| return new TextureStorage11_Cube(this, internalformat, renderTarget, size, levels, |
| hintLevelZeroOnly); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorage3D(GLenum internalformat, |
| bool renderTarget, |
| GLsizei width, |
| GLsizei height, |
| GLsizei depth, |
| int levels) |
| { |
| return new TextureStorage11_3D(this, internalformat, renderTarget, width, height, depth, |
| levels); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorage2DArray(GLenum internalformat, |
| bool renderTarget, |
| GLsizei width, |
| GLsizei height, |
| GLsizei depth, |
| int levels) |
| { |
| return new TextureStorage11_2DArray(this, internalformat, renderTarget, width, height, depth, |
| levels); |
| } |
| |
| TextureStorage *Renderer11::createTextureStorage2DMultisample(GLenum internalformat, |
| GLsizei width, |
| GLsizei height, |
| int levels, |
| int samples, |
| GLboolean fixedSampleLocations) |
| { |
| return new TextureStorage11_2DMultisample(this, internalformat, width, height, levels, samples, |
| fixedSampleLocations); |
| } |
| |
| gl::Error Renderer11::readFromAttachment(const gl::Context *context, |
| const gl::FramebufferAttachment &srcAttachment, |
| const gl::Rectangle &sourceArea, |
| GLenum format, |
| GLenum type, |
| GLuint outputPitch, |
| const gl::PixelPackState &pack, |
| uint8_t *pixelsOut) |
| { |
| ASSERT(sourceArea.width >= 0); |
| ASSERT(sourceArea.height >= 0); |
| |
| const bool invertTexture = UsePresentPathFast(this, &srcAttachment); |
| |
| RenderTarget11 *rt11 = nullptr; |
| ANGLE_TRY(srcAttachment.getRenderTarget(context, &rt11)); |
| ASSERT(rt11->getTexture().valid()); |
| |
| const TextureHelper11 &textureHelper = rt11->getTexture(); |
| unsigned int sourceSubResource = rt11->getSubresourceIndex(); |
| |
| const gl::Extents &texSize = textureHelper.getExtents(); |
| |
| gl::Rectangle actualArea = sourceArea; |
| if (invertTexture) |
| { |
| actualArea.y = texSize.height - actualArea.y - actualArea.height; |
| } |
| |
| // Clamp read region to the defined texture boundaries, preventing out of bounds reads |
| // and reads of uninitialized data. |
| gl::Rectangle safeArea; |
| safeArea.x = gl::clamp(actualArea.x, 0, texSize.width); |
| safeArea.y = gl::clamp(actualArea.y, 0, texSize.height); |
| safeArea.width = |
| gl::clamp(actualArea.width + std::min(actualArea.x, 0), 0, texSize.width - safeArea.x); |
| safeArea.height = |
| gl::clamp(actualArea.height + std::min(actualArea.y, 0), 0, texSize.height - safeArea.y); |
| |
| ASSERT(safeArea.x >= 0 && safeArea.y >= 0); |
| ASSERT(safeArea.x + safeArea.width <= texSize.width); |
| ASSERT(safeArea.y + safeArea.height <= texSize.height); |
| |
| if (safeArea.width == 0 || safeArea.height == 0) |
| { |
| // no work to do |
| return gl::NoError(); |
| } |
| |
| gl::Extents safeSize(safeArea.width, safeArea.height, 1); |
| TextureHelper11 stagingHelper; |
| ANGLE_TRY_RESULT( |
| createStagingTexture(textureHelper.getTextureType(), textureHelper.getFormatSet(), safeSize, |
| StagingAccess::READ), |
| stagingHelper); |
| |
| TextureHelper11 resolvedTextureHelper; |
| |
| // "srcTexture" usually points to the source texture. |
| // For 2D multisampled textures, it points to the multisampled resolve texture. |
| const TextureHelper11 *srcTexture = &textureHelper; |
| |
| if (textureHelper.is2D() && textureHelper.getSampleCount() > 1) |
| { |
| D3D11_TEXTURE2D_DESC resolveDesc; |
| resolveDesc.Width = static_cast<UINT>(texSize.width); |
| resolveDesc.Height = static_cast<UINT>(texSize.height); |
| resolveDesc.MipLevels = 1; |
| resolveDesc.ArraySize = 1; |
| resolveDesc.Format = textureHelper.getFormat(); |
| resolveDesc.SampleDesc.Count = 1; |
| resolveDesc.SampleDesc.Quality = 0; |
| resolveDesc.Usage = D3D11_USAGE_DEFAULT; |
| resolveDesc.BindFlags = 0; |
| resolveDesc.CPUAccessFlags = 0; |
| resolveDesc.MiscFlags = 0; |
| |
| ANGLE_TRY( |
| allocateTexture(resolveDesc, textureHelper.getFormatSet(), &resolvedTextureHelper)); |
| |
| mDeviceContext->ResolveSubresource(resolvedTextureHelper.get(), 0, textureHelper.get(), |
| sourceSubResource, textureHelper.getFormat()); |
| |
| sourceSubResource = 0; |
| srcTexture = &resolvedTextureHelper; |
| } |
| |
| D3D11_BOX srcBox; |
| srcBox.left = static_cast<UINT>(safeArea.x); |
| srcBox.right = static_cast<UINT>(safeArea.x + safeArea.width); |
| srcBox.top = static_cast<UINT>(safeArea.y); |
| srcBox.bottom = static_cast<UINT>(safeArea.y + safeArea.height); |
| |
| // Select the correct layer from a 3D attachment |
| srcBox.front = 0; |
| if (textureHelper.is3D()) |
| { |
| srcBox.front = static_cast<UINT>(srcAttachment.layer()); |
| } |
| srcBox.back = srcBox.front + 1; |
| |
| mDeviceContext->CopySubresourceRegion(stagingHelper.get(), 0, 0, 0, 0, srcTexture->get(), |
| sourceSubResource, &srcBox); |
| |
| if (!invertTexture) |
| { |
| PackPixelsParams packParams(safeArea, format, type, outputPitch, pack, 0); |
| return packPixels(stagingHelper, packParams, pixelsOut); |
| } |
| |
| gl::PixelPackState invertTexturePack; |
| |
| // Create a new PixelPackState with reversed row order. Note that we can't just assign |
| // 'invertTexturePack' to be 'pack' (or memcpy) since that breaks the ref counting/object |
| // tracking in the 'pixelBuffer' members, causing leaks. Instead we must use |
| // pixelBuffer.set() twice, which performs the addRef/release correctly |
| invertTexturePack.alignment = pack.alignment; |
| invertTexturePack.pixelBuffer.set(context, pack.pixelBuffer.get()); |
| invertTexturePack.reverseRowOrder = !pack.reverseRowOrder; |
| |
| PackPixelsParams packParams(safeArea, format, type, outputPitch, invertTexturePack, 0); |
| gl::Error error = packPixels(stagingHelper, packParams, pixelsOut); |
| invertTexturePack.pixelBuffer.set(context, nullptr); |
| ANGLE_TRY(error); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::packPixels(const TextureHelper11 &textureHelper, |
| const PackPixelsParams ¶ms, |
| uint8_t *pixelsOut) |
| { |
| ID3D11Resource *readResource = textureHelper.get(); |
| |
| D3D11_MAPPED_SUBRESOURCE mapping; |
| HRESULT hr = mDeviceContext->Map(readResource, 0, D3D11_MAP_READ, 0, &mapping); |
| if (FAILED(hr)) |
| { |
| ASSERT(hr == E_OUTOFMEMORY); |
| return gl::OutOfMemory() << "Failed to map internal texture for reading, " << gl::FmtHR(hr); |
| } |
| |
| uint8_t *source = static_cast<uint8_t *>(mapping.pData); |
| int inputPitch = static_cast<int>(mapping.RowPitch); |
| |
| const auto &formatInfo = textureHelper.getFormatSet(); |
| ASSERT(formatInfo.format().glInternalFormat != GL_NONE); |
| |
| PackPixels(params, formatInfo.format(), inputPitch, source, pixelsOut); |
| |
| mDeviceContext->Unmap(readResource, 0); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::blitRenderbufferRect(const gl::Context *context, |
| const gl::Rectangle &readRectIn, |
| const gl::Rectangle &drawRectIn, |
| RenderTargetD3D *readRenderTarget, |
| RenderTargetD3D *drawRenderTarget, |
| GLenum filter, |
| const gl::Rectangle *scissor, |
| bool colorBlit, |
| bool depthBlit, |
| bool stencilBlit) |
| { |
| // Since blitRenderbufferRect is called for each render buffer that needs to be blitted, |
| // it should never be the case that both color and depth/stencil need to be blitted at |
| // at the same time. |
| ASSERT(colorBlit != (depthBlit || stencilBlit)); |
| |
| RenderTarget11 *drawRenderTarget11 = GetAs<RenderTarget11>(drawRenderTarget); |
| if (!drawRenderTarget11) |
| { |
| return gl::OutOfMemory() |
| << "Failed to retrieve the internal draw render target from the draw framebuffer."; |
| } |
| |
| const TextureHelper11 &drawTexture = drawRenderTarget11->getTexture(); |
| unsigned int drawSubresource = drawRenderTarget11->getSubresourceIndex(); |
| |
| RenderTarget11 *readRenderTarget11 = GetAs<RenderTarget11>(readRenderTarget); |
| if (!readRenderTarget11) |
| { |
| return gl::OutOfMemory() |
| << "Failed to retrieve the internal read render target from the read framebuffer."; |
| } |
| |
| TextureHelper11 readTexture; |
| unsigned int readSubresource = 0; |
| d3d11::SharedSRV readSRV; |
| |
| if (readRenderTarget->isMultisampled()) |
| { |
| ANGLE_TRY_RESULT( |
| resolveMultisampledTexture(context, readRenderTarget11, depthBlit, stencilBlit), |
| readTexture); |
| |
| if (!stencilBlit) |
| { |
| const auto &readFormatSet = readTexture.getFormatSet(); |
| |
| D3D11_SHADER_RESOURCE_VIEW_DESC viewDesc; |
| viewDesc.Format = readFormatSet.srvFormat; |
| viewDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D; |
| viewDesc.Texture2D.MipLevels = 1; |
| viewDesc.Texture2D.MostDetailedMip = 0; |
| |
| ANGLE_TRY(allocateResource(viewDesc, readTexture.get(), &readSRV)); |
| } |
| } |
| else |
| { |
| ASSERT(readRenderTarget11); |
| readTexture = readRenderTarget11->getTexture(); |
| readSubresource = readRenderTarget11->getSubresourceIndex(); |
| readSRV = readRenderTarget11->getBlitShaderResourceView().makeCopy(); |
| if (!readSRV.valid()) |
| { |
| ASSERT(depthBlit || stencilBlit); |
| readSRV = readRenderTarget11->getShaderResourceView().makeCopy(); |
| } |
| ASSERT(readSRV.valid()); |
| } |
| |
| // Stencil blits don't use shaders. |
| ASSERT(readSRV.valid() || stencilBlit); |
| |
| const gl::Extents readSize(readRenderTarget->getWidth(), readRenderTarget->getHeight(), 1); |
| const gl::Extents drawSize(drawRenderTarget->getWidth(), drawRenderTarget->getHeight(), 1); |
| |
| // From the spec: |
| // "The actual region taken from the read framebuffer is limited to the intersection of the |
| // source buffers being transferred, which may include the color buffer selected by the read |
| // buffer, the depth buffer, and / or the stencil buffer depending on mask." |
| // This means negative x and y are out of bounds, and not to be read from. We handle this here |
| // by internally scaling the read and draw rectangles. |
| gl::Rectangle readRect = readRectIn; |
| gl::Rectangle drawRect = drawRectIn; |
| auto readToDrawX = [&drawRectIn, &readRectIn](int readOffset) { |
| double readToDrawScale = |
| static_cast<double>(drawRectIn.width) / static_cast<double>(readRectIn.width); |
| return static_cast<int>(round(static_cast<double>(readOffset) * readToDrawScale)); |
| }; |
| if (readRect.x < 0) |
| { |
| int readOffset = -readRect.x; |
| readRect.x += readOffset; |
| readRect.width -= readOffset; |
| |
| int drawOffset = readToDrawX(readOffset); |
| drawRect.x += drawOffset; |
| drawRect.width -= drawOffset; |
| } |
| |
| auto readToDrawY = [&drawRectIn, &readRectIn](int readOffset) { |
| double readToDrawScale = |
| static_cast<double>(drawRectIn.height) / static_cast<double>(readRectIn.height); |
| return static_cast<int>(round(static_cast<double>(readOffset) * readToDrawScale)); |
| }; |
| if (readRect.y < 0) |
| { |
| int readOffset = -readRect.y; |
| readRect.y += readOffset; |
| readRect.height -= readOffset; |
| |
| int drawOffset = readToDrawY(readOffset); |
| drawRect.y += drawOffset; |
| drawRect.height -= drawOffset; |
| } |
| |
| if (readRect.x1() < 0) |
| { |
| int readOffset = -readRect.x1(); |
| readRect.width += readOffset; |
| |
| int drawOffset = readToDrawX(readOffset); |
| drawRect.width += drawOffset; |
| } |
| |
| if (readRect.y1() < 0) |
| { |
| int readOffset = -readRect.y1(); |
| readRect.height += readOffset; |
| |
| int drawOffset = readToDrawY(readOffset); |
| drawRect.height += drawOffset; |
| } |
| |
| bool scissorNeeded = scissor && gl::ClipRectangle(drawRect, *scissor, nullptr); |
| |
| const auto &destFormatInfo = |
| gl::GetSizedInternalFormatInfo(drawRenderTarget->getInternalFormat()); |
| const auto &srcFormatInfo = |
| gl::GetSizedInternalFormatInfo(readRenderTarget->getInternalFormat()); |
| const auto &formatSet = drawRenderTarget11->getFormatSet(); |
| const auto &nativeFormat = formatSet.format(); |
| |
| // Some blits require masking off emulated texture channels. eg: from RGBA8 to RGB8, we |
| // emulate RGB8 with RGBA8, so we need to mask off the alpha channel when we copy. |
| |
| gl::Color<bool> colorMask; |
| colorMask.red = |
| (srcFormatInfo.redBits > 0) && (destFormatInfo.redBits == 0) && (nativeFormat.redBits > 0); |
| colorMask.green = (srcFormatInfo.greenBits > 0) && (destFormatInfo.greenBits == 0) && |
| (nativeFormat.greenBits > 0); |
| colorMask.blue = (srcFormatInfo.blueBits > 0) && (destFormatInfo.blueBits == 0) && |
| (nativeFormat.blueBits > 0); |
| colorMask.alpha = (srcFormatInfo.alphaBits > 0) && (destFormatInfo.alphaBits == 0) && |
| (nativeFormat.alphaBits > 0); |
| |
| // We only currently support masking off the alpha channel. |
| bool colorMaskingNeeded = colorMask.alpha; |
| ASSERT(!colorMask.red && !colorMask.green && !colorMask.blue); |
| |
| bool wholeBufferCopy = !scissorNeeded && !colorMaskingNeeded && readRect.x == 0 && |
| readRect.width == readSize.width && readRect.y == 0 && |
| readRect.height == readSize.height && drawRect.x == 0 && |
| drawRect.width == drawSize.width && drawRect.y == 0 && |
| drawRect.height == drawSize.height; |
| |
| bool stretchRequired = readRect.width != drawRect.width || readRect.height != drawRect.height; |
| |
| bool flipRequired = |
| readRect.width < 0 || readRect.height < 0 || drawRect.width < 0 || drawRect.height < 0; |
| |
| bool outOfBounds = readRect.x < 0 || readRect.x + readRect.width > readSize.width || |
| readRect.y < 0 || readRect.y + readRect.height > readSize.height || |
| drawRect.x < 0 || drawRect.x + drawRect.width > drawSize.width || |
| drawRect.y < 0 || drawRect.y + drawRect.height > drawSize.height; |
| |
| bool partialDSBlit = |
| (nativeFormat.depthBits > 0 && depthBlit) != (nativeFormat.stencilBits > 0 && stencilBlit); |
| |
| if (readRenderTarget11->getFormatSet().formatID == |
| drawRenderTarget11->getFormatSet().formatID && |
| !stretchRequired && !outOfBounds && !flipRequired && !partialDSBlit && |
| !colorMaskingNeeded && (!(depthBlit || stencilBlit) || wholeBufferCopy)) |
| { |
| UINT dstX = drawRect.x; |
| UINT dstY = drawRect.y; |
| |
| D3D11_BOX readBox; |
| readBox.left = readRect.x; |
| readBox.right = readRect.x + readRect.width; |
| readBox.top = readRect.y; |
| readBox.bottom = readRect.y + readRect.height; |
| readBox.front = 0; |
| readBox.back = 1; |
| |
| if (scissorNeeded) |
| { |
| // drawRect is guaranteed to have positive width and height because stretchRequired is |
| // false. |
| ASSERT(drawRect.width >= 0 || drawRect.height >= 0); |
| |
| if (drawRect.x < scissor->x) |
| { |
| dstX = scissor->x; |
| readBox.left += (scissor->x - drawRect.x); |
| } |
| if (drawRect.y < scissor->y) |
| { |
| dstY = scissor->y; |
| readBox.top += (scissor->y - drawRect.y); |
| } |
| if (drawRect.x + drawRect.width > scissor->x + scissor->width) |
| { |
| readBox.right -= ((drawRect.x + drawRect.width) - (scissor->x + scissor->width)); |
| } |
| if (drawRect.y + drawRect.height > scissor->y + scissor->height) |
| { |
| readBox.bottom -= ((drawRect.y + drawRect.height) - (scissor->y + scissor->height)); |
| } |
| } |
| |
| // D3D11 needs depth-stencil CopySubresourceRegions to have a NULL pSrcBox |
| // We also require complete framebuffer copies for depth-stencil blit. |
| D3D11_BOX *pSrcBox = wholeBufferCopy ? nullptr : &readBox; |
| |
| mDeviceContext->CopySubresourceRegion(drawTexture.get(), drawSubresource, dstX, dstY, 0, |
| readTexture.get(), readSubresource, pSrcBox); |
| } |
| else |
| { |
| gl::Box readArea(readRect.x, readRect.y, 0, readRect.width, readRect.height, 1); |
| gl::Box drawArea(drawRect.x, drawRect.y, 0, drawRect.width, drawRect.height, 1); |
| |
| if (depthBlit && stencilBlit) |
| { |
| ANGLE_TRY(mBlit->copyDepthStencil(readTexture, readSubresource, readArea, readSize, |
| drawTexture, drawSubresource, drawArea, drawSize, |
| scissor)); |
| } |
| else if (depthBlit) |
| { |
| const d3d11::DepthStencilView &drawDSV = drawRenderTarget11->getDepthStencilView(); |
| ASSERT(readSRV.valid()); |
| ANGLE_TRY(mBlit->copyDepth(context, readSRV, readArea, readSize, drawDSV, drawArea, |
| drawSize, scissor)); |
| } |
| else if (stencilBlit) |
| { |
| ANGLE_TRY(mBlit->copyStencil(context, readTexture, readSubresource, readArea, readSize, |
| drawTexture, drawSubresource, drawArea, drawSize, |
| scissor)); |
| } |
| else |
| { |
| const d3d11::RenderTargetView &drawRTV = drawRenderTarget11->getRenderTargetView(); |
| |
| // We don't currently support masking off any other channel than alpha |
| bool maskOffAlpha = colorMaskingNeeded && colorMask.alpha; |
| ASSERT(readSRV.valid()); |
| ANGLE_TRY(mBlit->copyTexture( |
| context, readSRV, readArea, readSize, srcFormatInfo.format, drawRTV, drawArea, |
| drawSize, scissor, destFormatInfo.format, filter, maskOffAlpha, false, false)); |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| bool Renderer11::isES3Capable() const |
| { |
| return (d3d11_gl::GetMaximumClientVersion(mRenderer11DeviceCaps.featureLevel).major > 2); |
| }; |
| |
| void Renderer11::onSwap() |
| { |
| // Send histogram updates every half hour |
| const double kHistogramUpdateInterval = 30 * 60; |
| |
| auto *platform = ANGLEPlatformCurrent(); |
| const double currentTime = platform->monotonicallyIncreasingTime(platform); |
| const double timeSinceLastUpdate = currentTime - mLastHistogramUpdateTime; |
| |
| if (timeSinceLastUpdate > kHistogramUpdateInterval) |
| { |
| updateHistograms(); |
| mLastHistogramUpdateTime = currentTime; |
| } |
| } |
| |
| void Renderer11::updateHistograms() |
| { |
| // Update the buffer CPU memory histogram |
| { |
| size_t sizeSum = 0; |
| for (auto &buffer : mAliveBuffers) |
| { |
| sizeSum += buffer->getTotalCPUBufferMemoryBytes(); |
| } |
| const int kOneMegaByte = 1024 * 1024; |
| ANGLE_HISTOGRAM_MEMORY_MB("GPU.ANGLE.Buffer11CPUMemoryMB", |
| static_cast<int>(sizeSum) / kOneMegaByte); |
| } |
| } |
| |
| void Renderer11::onBufferCreate(const Buffer11 *created) |
| { |
| mAliveBuffers.insert(created); |
| } |
| |
| void Renderer11::onBufferDelete(const Buffer11 *deleted) |
| { |
| mAliveBuffers.erase(deleted); |
| } |
| |
| gl::ErrorOrResult<TextureHelper11> Renderer11::resolveMultisampledTexture( |
| const gl::Context *context, |
| RenderTarget11 *renderTarget, |
| bool depth, |
| bool stencil) |
| { |
| if (depth && !stencil) |
| { |
| return mBlit->resolveDepth(context, renderTarget); |
| } |
| |
| if (stencil) |
| { |
| return mBlit->resolveStencil(context, renderTarget, depth); |
| } |
| |
| const auto &formatSet = renderTarget->getFormatSet(); |
| |
| ASSERT(renderTarget->isMultisampled()); |
| const d3d11::SharedSRV &sourceSRV = renderTarget->getShaderResourceView(); |
| D3D11_SHADER_RESOURCE_VIEW_DESC sourceSRVDesc; |
| sourceSRV.get()->GetDesc(&sourceSRVDesc); |
| ASSERT(sourceSRVDesc.ViewDimension == D3D_SRV_DIMENSION_TEXTURE2DMS); |
| |
| D3D11_TEXTURE2D_DESC resolveDesc; |
| resolveDesc.Width = renderTarget->getWidth(); |
| resolveDesc.Height = renderTarget->getHeight(); |
| resolveDesc.MipLevels = 1; |
| resolveDesc.ArraySize = 1; |
| resolveDesc.Format = formatSet.texFormat; |
| resolveDesc.SampleDesc.Count = 1; |
| resolveDesc.SampleDesc.Quality = 0; |
| resolveDesc.Usage = D3D11_USAGE_DEFAULT; |
| resolveDesc.BindFlags = D3D11_BIND_SHADER_RESOURCE; |
| resolveDesc.CPUAccessFlags = 0; |
| resolveDesc.MiscFlags = 0; |
| |
| TextureHelper11 resolveTexture; |
| ANGLE_TRY(allocateTexture(resolveDesc, formatSet, &resolveTexture)); |
| |
| mDeviceContext->ResolveSubresource(resolveTexture.get(), 0, renderTarget->getTexture().get(), |
| renderTarget->getSubresourceIndex(), formatSet.texFormat); |
| return resolveTexture; |
| } |
| |
| bool Renderer11::getLUID(LUID *adapterLuid) const |
| { |
| adapterLuid->HighPart = 0; |
| adapterLuid->LowPart = 0; |
| |
| if (!mDxgiAdapter) |
| { |
| return false; |
| } |
| |
| DXGI_ADAPTER_DESC adapterDesc; |
| if (FAILED(mDxgiAdapter->GetDesc(&adapterDesc))) |
| { |
| return false; |
| } |
| |
| *adapterLuid = adapterDesc.AdapterLuid; |
| return true; |
| } |
| |
| VertexConversionType Renderer11::getVertexConversionType( |
| gl::VertexFormatType vertexFormatType) const |
| { |
| return d3d11::GetVertexFormatInfo(vertexFormatType, mRenderer11DeviceCaps.featureLevel) |
| .conversionType; |
| } |
| |
| GLenum Renderer11::getVertexComponentType(gl::VertexFormatType vertexFormatType) const |
| { |
| const auto &format = |
| d3d11::GetVertexFormatInfo(vertexFormatType, mRenderer11DeviceCaps.featureLevel); |
| return d3d11::GetComponentType(format.nativeFormat); |
| } |
| |
| gl::ErrorOrResult<unsigned int> Renderer11::getVertexSpaceRequired( |
| const gl::VertexAttribute &attrib, |
| const gl::VertexBinding &binding, |
| GLsizei count, |
| GLsizei instances) const |
| { |
| if (!attrib.enabled) |
| { |
| return 16u; |
| } |
| |
| unsigned int elementCount = 0; |
| const unsigned int divisor = binding.getDivisor(); |
| if (instances == 0 || divisor == 0) |
| { |
| elementCount = count; |
| } |
| else |
| { |
| // Round up to divisor, if possible |
| elementCount = UnsignedCeilDivide(static_cast<unsigned int>(instances), divisor); |
| } |
| |
| gl::VertexFormatType formatType = gl::GetVertexFormatType(attrib); |
| const D3D_FEATURE_LEVEL featureLevel = mRenderer11DeviceCaps.featureLevel; |
| const d3d11::VertexFormat &vertexFormatInfo = |
| d3d11::GetVertexFormatInfo(formatType, featureLevel); |
| const d3d11::DXGIFormatSize &dxgiFormatInfo = |
| d3d11::GetDXGIFormatSizeInfo(vertexFormatInfo.nativeFormat); |
| unsigned int elementSize = dxgiFormatInfo.pixelBytes; |
| if (elementSize > std::numeric_limits<unsigned int>::max() / elementCount) |
| { |
| return gl::OutOfMemory() << "New vertex buffer size would result in an overflow."; |
| } |
| |
| return elementSize * elementCount; |
| } |
| |
| void Renderer11::generateCaps(gl::Caps *outCaps, |
| gl::TextureCapsMap *outTextureCaps, |
| gl::Extensions *outExtensions, |
| gl::Limitations *outLimitations) const |
| { |
| d3d11_gl::GenerateCaps(mDevice, mDeviceContext, mRenderer11DeviceCaps, outCaps, outTextureCaps, |
| outExtensions, outLimitations); |
| } |
| |
| angle::WorkaroundsD3D Renderer11::generateWorkarounds() const |
| { |
| return d3d11::GenerateWorkarounds(mRenderer11DeviceCaps, mAdapterDescription); |
| } |
| |
| egl::Error Renderer11::getEGLDevice(DeviceImpl **device) |
| { |
| if (mEGLDevice == nullptr) |
| { |
| ASSERT(mDevice != nullptr); |
| mEGLDevice = new DeviceD3D(); |
| egl::Error error = mEGLDevice->initialize(reinterpret_cast<void *>(mDevice), |
| EGL_D3D11_DEVICE_ANGLE, EGL_FALSE); |
| |
| if (error.isError()) |
| { |
| SafeDelete(mEGLDevice); |
| return error; |
| } |
| } |
| |
| *device = static_cast<DeviceImpl *>(mEGLDevice); |
| return egl::NoError(); |
| } |
| |
| ContextImpl *Renderer11::createContext(const gl::ContextState &state) |
| { |
| return new Context11(state, this); |
| } |
| |
| gl::Error Renderer11::genericDrawElements(const gl::Context *context, |
| GLenum mode, |
| GLsizei count, |
| GLenum type, |
| const void *indices, |
| GLsizei instances) |
| { |
| const auto &data = context->getContextState(); |
| const auto &glState = data.getState(); |
| gl::Program *program = glState.getProgram(); |
| ASSERT(program != nullptr); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(program); |
| bool usesPointSize = programD3D->usesPointSize(); |
| |
| programD3D->updateSamplerMapping(); |
| |
| ANGLE_TRY(generateSwizzles(context)); |
| |
| if (!applyPrimitiveType(mode, count, usesPointSize)) |
| { |
| return gl::NoError(); |
| } |
| |
| ANGLE_TRY(mStateManager.updateState(context, mode)); |
| |
| applyTransformFeedbackBuffers(data); |
| // Transform feedback is not allowed for DrawElements, this error should have been caught at the |
| // API validation layer. |
| ASSERT(!glState.isTransformFeedbackActiveUnpaused()); |
| |
| ANGLE_TRY(programD3D->applyUniformBuffers(data)); |
| |
| if (!skipDraw(data, mode)) |
| { |
| ANGLE_TRY(drawElementsImpl(context, mode, count, type, indices, instances)); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::genericDrawArrays(const gl::Context *context, |
| GLenum mode, |
| GLint first, |
| GLsizei count, |
| GLsizei instances) |
| { |
| const auto &data = context->getContextState(); |
| const auto &glState = data.getState(); |
| gl::Program *program = glState.getProgram(); |
| ASSERT(program != nullptr); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(program); |
| bool usesPointSize = programD3D->usesPointSize(); |
| |
| programD3D->updateSamplerMapping(); |
| |
| ANGLE_TRY(generateSwizzles(context)); |
| if (!applyPrimitiveType(mode, count, usesPointSize)) |
| { |
| return gl::NoError(); |
| } |
| |
| ANGLE_TRY(mStateManager.updateState(context, mode)); |
| ANGLE_TRY(applyTransformFeedbackBuffers(data)); |
| ANGLE_TRY(mStateManager.applyVertexBuffer(context, mode, first, count, instances, nullptr)); |
| ANGLE_TRY(programD3D->applyUniformBuffers(data)); |
| |
| if (!skipDraw(data, mode)) |
| { |
| ANGLE_TRY(drawArraysImpl(context, mode, first, count, instances)); |
| |
| if (glState.isTransformFeedbackActiveUnpaused()) |
| { |
| ANGLE_TRY(markTransformFeedbackUsage(data)); |
| } |
| } |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::genericDrawIndirect(const gl::Context *context, |
| GLenum mode, |
| GLenum type, |
| const void *indirect) |
| { |
| const auto &contextState = context->getContextState(); |
| const auto &glState = context->getGLState(); |
| gl::Program *program = glState.getProgram(); |
| ASSERT(program != nullptr); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(program); |
| bool usesPointSize = programD3D->usesPointSize(); |
| programD3D->updateSamplerMapping(); |
| |
| ANGLE_TRY(generateSwizzles(context)); |
| applyPrimitiveType(mode, 0, usesPointSize); |
| ANGLE_TRY(mStateManager.updateState(context, mode)); |
| ANGLE_TRY(applyTransformFeedbackBuffers(contextState)); |
| ASSERT(!glState.isTransformFeedbackActiveUnpaused()); |
| ANGLE_TRY(programD3D->applyUniformBuffers(contextState)); |
| |
| if (type == GL_NONE) |
| { |
| ANGLE_TRY(drawArraysIndirectImpl(context, mode, indirect)); |
| } |
| else |
| { |
| ANGLE_TRY(drawElementsIndirectImpl(context, mode, type, indirect)); |
| } |
| |
| return gl::NoError(); |
| } |
| |
| FramebufferImpl *Renderer11::createDefaultFramebuffer(const gl::FramebufferState &state) |
| { |
| return new Framebuffer11(state, this); |
| } |
| |
| gl::Error Renderer11::getScratchMemoryBuffer(size_t requestedSize, angle::MemoryBuffer **bufferOut) |
| { |
| if (!mScratchMemoryBuffer.get(requestedSize, bufferOut)) |
| { |
| return gl::OutOfMemory() << "Failed to allocate internal buffer."; |
| } |
| return gl::NoError(); |
| } |
| |
| gl::Version Renderer11::getMaxSupportedESVersion() const |
| { |
| return d3d11_gl::GetMaximumClientVersion(mRenderer11DeviceCaps.featureLevel); |
| } |
| |
| gl::DebugAnnotator *Renderer11::getAnnotator() |
| { |
| return mAnnotator; |
| } |
| |
| gl::Error Renderer11::applyComputeShader(const gl::Context *context) |
| { |
| ANGLE_TRY(ensureHLSLCompilerInitialized()); |
| |
| const auto &glState = context->getGLState(); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(glState.getProgram()); |
| |
| ShaderExecutableD3D *computeExe = nullptr; |
| ANGLE_TRY(programD3D->getComputeExecutable(&computeExe)); |
| ASSERT(computeExe != nullptr); |
| |
| mStateManager.setComputeShader(&GetAs<ShaderExecutable11>(computeExe)->getComputeShader()); |
| |
| return programD3D->applyComputeUniforms(); |
| } |
| |
| gl::Error Renderer11::dispatchCompute(const gl::Context *context, |
| GLuint numGroupsX, |
| GLuint numGroupsY, |
| GLuint numGroupsZ) |
| { |
| gl::Program *program = context->getGLState().getProgram(); |
| ASSERT(program != nullptr); |
| ProgramD3D *programD3D = GetImplAs<ProgramD3D>(program); |
| |
| programD3D->updateSamplerMapping(); |
| ANGLE_TRY(generateSwizzles(context, gl::SAMPLER_COMPUTE)); |
| |
| ANGLE_TRY(mStateManager.updateStateForCompute(context, numGroupsX, numGroupsY, numGroupsZ)); |
| |
| ANGLE_TRY(applyComputeShader(context)); |
| // TODO(Xinghua): applyUniformBuffers for compute shader. |
| mDeviceContext->Dispatch(numGroupsX, numGroupsY, numGroupsZ); |
| |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::applyComputeUniforms(const ProgramD3D &programD3D, |
| const std::vector<D3DUniform *> &uniformArray) |
| { |
| unsigned int totalRegisterCountCS = 0; |
| bool computeUniformsDirty = false; |
| |
| for (const D3DUniform *uniform : uniformArray) |
| { |
| ASSERT(uniform->isReferencedByComputeShader()); |
| |
| // TODO(Xinghua): add isImage() and isAtomicCounter(). |
| if (uniform->isSampler()) |
| { |
| totalRegisterCountCS += uniform->registerCount; |
| computeUniformsDirty = (computeUniformsDirty || uniform->dirty); |
| } |
| } |
| |
| UniformStorage11 *computeUniformStorage = |
| GetAs<UniformStorage11>(&programD3D.getComputeUniformStorage()); |
| ASSERT(computeUniformStorage); |
| |
| const d3d11::Buffer *computeConstantBufferObj = nullptr; |
| ANGLE_TRY(computeUniformStorage->getConstantBuffer(this, &computeConstantBufferObj)); |
| |
| ID3D11Buffer *computeConstantBuffer = computeConstantBufferObj->get(); |
| |
| if (totalRegisterCountCS > 0 && computeUniformsDirty) |
| { |
| D3D11_MAPPED_SUBRESOURCE map = {0}; |
| HRESULT result = |
| mDeviceContext->Map(computeConstantBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &map); |
| ASSERT(SUCCEEDED(result)); |
| auto *mapCS = static_cast<float(*)[4]>(map.pData); |
| |
| ASSERT(mapCS); |
| for (const D3DUniform *uniform : uniformArray) |
| { |
| ASSERT(uniform->isReferencedByComputeShader()); |
| |
| if (uniform->isSampler()) |
| { |
| continue; |
| } |
| |
| unsigned int componentCount = (4 - uniform->registerCount); |
| memcpy(&mapCS[uniform->csRegisterIndex][uniform->registerElement], uniform->data, |
| uniform->registerCount * sizeof(float) * componentCount); |
| } |
| |
| mDeviceContext->Unmap(computeConstantBuffer, 0); |
| } |
| |
| if (mCurrentComputeConstantBuffer != reinterpret_cast<uintptr_t>(computeConstantBuffer)) |
| { |
| mDeviceContext->CSSetConstantBuffers( |
| d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DEFAULT_UNIFORM_BLOCK, 1, &computeConstantBuffer); |
| mCurrentComputeConstantBuffer = reinterpret_cast<uintptr_t>(computeConstantBuffer); |
| } |
| |
| auto *samplerMetadataCS = mStateManager.getComputeSamplerMetadata(); |
| |
| if (!mDriverConstantBufferCS.valid()) |
| { |
| D3D11_BUFFER_DESC constantBufferDescription = {0}; |
| d3d11::InitConstantBufferDesc( |
| &constantBufferDescription, |
| sizeof(dx_ComputeConstants11) + samplerMetadataCS->sizeBytes()); |
| ANGLE_TRY(allocateResource(constantBufferDescription, &mDriverConstantBufferCS)); |
| ID3D11Buffer *buffer = mDriverConstantBufferCS.get(); |
| mDeviceContext->CSSetConstantBuffers(d3d11::RESERVED_CONSTANT_BUFFER_SLOT_DRIVER, 1, |
| &buffer); |
| } |
| |
| const dx_ComputeConstants11 &computeConstants = mStateManager.getComputeConstants(); |
| size_t samplerMetadataReferencedBytesCS = sizeof(SamplerMetadata11::dx_SamplerMetadata) * |
| programD3D.getUsedSamplerRange(gl::SAMPLER_COMPUTE); |
| applyDriverConstantsIfNeeded(&mAppliedComputeConstants, computeConstants, samplerMetadataCS, |
| samplerMetadataReferencedBytesCS, mDriverConstantBufferCS); |
| |
| return gl::NoError(); |
| } |
| |
| gl::ErrorOrResult<TextureHelper11> Renderer11::createStagingTexture( |
| ResourceType textureType, |
| const d3d11::Format &formatSet, |
| const gl::Extents &size, |
| StagingAccess readAndWriteAccess) |
| { |
| if (textureType == ResourceType::Texture2D) |
| { |
| D3D11_TEXTURE2D_DESC stagingDesc; |
| stagingDesc.Width = size.width; |
| stagingDesc.Height = size.height; |
| stagingDesc.MipLevels = 1; |
| stagingDesc.ArraySize = 1; |
| stagingDesc.Format = formatSet.texFormat; |
| stagingDesc.SampleDesc.Count = 1; |
| stagingDesc.SampleDesc.Quality = 0; |
| stagingDesc.Usage = D3D11_USAGE_STAGING; |
| stagingDesc.BindFlags = 0; |
| stagingDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ; |
| stagingDesc.MiscFlags = 0; |
| |
| if (readAndWriteAccess == StagingAccess::READ_WRITE) |
| { |
| stagingDesc.CPUAccessFlags |= D3D11_CPU_ACCESS_WRITE; |
| } |
| |
| TextureHelper11 stagingTex; |
| ANGLE_TRY(allocateTexture(stagingDesc, formatSet, &stagingTex)); |
| return stagingTex; |
| } |
| ASSERT(textureType == ResourceType::Texture3D); |
| |
| D3D11_TEXTURE3D_DESC stagingDesc; |
| stagingDesc.Width = size.width; |
| stagingDesc.Height = size.height; |
| stagingDesc.Depth = 1; |
| stagingDesc.MipLevels = 1; |
| stagingDesc.Format = formatSet.texFormat; |
| stagingDesc.Usage = D3D11_USAGE_STAGING; |
| stagingDesc.BindFlags = 0; |
| stagingDesc.CPUAccessFlags = D3D11_CPU_ACCESS_READ; |
| stagingDesc.MiscFlags = 0; |
| |
| TextureHelper11 stagingTex; |
| ANGLE_TRY(allocateTexture(stagingDesc, formatSet, &stagingTex)); |
| return stagingTex; |
| } |
| |
| gl::Error Renderer11::allocateTexture(const D3D11_TEXTURE2D_DESC &desc, |
| const d3d11::Format &format, |
| const D3D11_SUBRESOURCE_DATA *initData, |
| TextureHelper11 *textureOut) |
| { |
| d3d11::Texture2D texture; |
| ANGLE_TRY(mResourceManager11.allocate(this, &desc, initData, &texture)); |
| textureOut->init(std::move(texture), desc, format); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::allocateTexture(const D3D11_TEXTURE3D_DESC &desc, |
| const d3d11::Format &format, |
| const D3D11_SUBRESOURCE_DATA *initData, |
| TextureHelper11 *textureOut) |
| { |
| d3d11::Texture3D texture; |
| ANGLE_TRY(mResourceManager11.allocate(this, &desc, initData, &texture)); |
| textureOut->init(std::move(texture), desc, format); |
| return gl::NoError(); |
| } |
| |
| gl::Error Renderer11::getBlendState(const d3d11::BlendStateKey &key, |
| ID3D11BlendState **outBlendState) |
| { |
| return mStateCache.getBlendState(this, key, outBlendState); |
| } |
| |
| gl::Error Renderer11::getRasterizerState(const gl::RasterizerState &rasterState, |
| bool scissorEnabled, |
| ID3D11RasterizerState **outRasterizerState) |
| { |
| return mStateCache.getRasterizerState(this, rasterState, scissorEnabled, outRasterizerState); |
| } |
| |
| gl::Error Renderer11::getDepthStencilState(const gl::DepthStencilState &dsState, |
| ID3D11DepthStencilState **outDSState) |
| { |
| return mStateCache.getDepthStencilState(this, dsState, outDSState); |
| } |
| |
| gl::Error Renderer11::getSamplerState(const gl::SamplerState &samplerState, |
| ID3D11SamplerState **outSamplerState) |
| { |
| return mStateCache.getSamplerState(this, samplerState, outSamplerState); |
| } |
| |
| gl::Error Renderer11::clearRenderTarget(RenderTargetD3D *renderTarget, |
| const gl::ColorF &clearColorValue, |
| const float clearDepthValue, |
| const unsigned int clearStencilValue) |
| { |
| RenderTarget11 *renderTarget11 = GetAs<RenderTarget11>(renderTarget); |
| const d3d11::RenderTargetView &rtv = renderTarget11->getRenderTargetView(); |
| ASSERT(rtv.valid()); |
| |
| mDeviceContext->ClearRenderTargetView(rtv.get(), &clearColorValue.red); |
| |
| return gl::NoError(); |
| } |
| |
| } // namespace rx |