| /* |
| * Copyright (C) 2011 Google Inc. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following disclaimer |
| * in the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "config.h" |
| #include "core/rendering/RenderFlexibleBox.h" |
| |
| #include "core/frame/UseCounter.h" |
| #include "core/paint/BlockPainter.h" |
| #include "core/rendering/RenderLayer.h" |
| #include "core/rendering/RenderView.h" |
| #include "core/rendering/TextAutosizer.h" |
| #include "core/rendering/style/RenderStyle.h" |
| #include "platform/LengthFunctions.h" |
| #include "wtf/MathExtras.h" |
| #include <limits> |
| |
| namespace blink { |
| |
| struct RenderFlexibleBox::LineContext { |
| LineContext(LayoutUnit crossAxisOffset, LayoutUnit crossAxisExtent, size_t numberOfChildren, LayoutUnit maxAscent) |
| : crossAxisOffset(crossAxisOffset) |
| , crossAxisExtent(crossAxisExtent) |
| , numberOfChildren(numberOfChildren) |
| , maxAscent(maxAscent) |
| { |
| } |
| |
| LayoutUnit crossAxisOffset; |
| LayoutUnit crossAxisExtent; |
| size_t numberOfChildren; |
| LayoutUnit maxAscent; |
| }; |
| |
| struct RenderFlexibleBox::Violation { |
| Violation(RenderBox* child, LayoutUnit childSize) |
| : child(child) |
| , childSize(childSize) |
| { |
| } |
| |
| RenderBox* child; |
| LayoutUnit childSize; |
| }; |
| |
| |
| RenderFlexibleBox::RenderFlexibleBox(Element* element) |
| : RenderBlock(element) |
| , m_orderIterator(this) |
| , m_numberOfInFlowChildrenOnFirstLine(-1) |
| { |
| ASSERT(!childrenInline()); |
| } |
| |
| RenderFlexibleBox::~RenderFlexibleBox() |
| { |
| } |
| |
| RenderFlexibleBox* RenderFlexibleBox::createAnonymous(Document* document) |
| { |
| RenderFlexibleBox* renderer = new RenderFlexibleBox(0); |
| renderer->setDocumentForAnonymous(document); |
| return renderer; |
| } |
| |
| const char* RenderFlexibleBox::renderName() const |
| { |
| return "RenderFlexibleBox"; |
| } |
| |
| void RenderFlexibleBox::computeIntrinsicLogicalWidths(LayoutUnit& minLogicalWidth, LayoutUnit& maxLogicalWidth) const |
| { |
| // FIXME: We're ignoring flex-basis here and we shouldn't. We can't start honoring it though until |
| // the flex shorthand stops setting it to 0. |
| // See https://bugs.webkit.org/show_bug.cgi?id=116117 and http://crbug.com/240765. |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| |
| LayoutUnit margin = marginIntrinsicLogicalWidthForChild(child); |
| bool hasOrthogonalWritingMode = child->isHorizontalWritingMode() != isHorizontalWritingMode(); |
| LayoutUnit minPreferredLogicalWidth = hasOrthogonalWritingMode ? child->logicalHeight() : child->minPreferredLogicalWidth(); |
| LayoutUnit maxPreferredLogicalWidth = hasOrthogonalWritingMode ? child->logicalHeight() : child->maxPreferredLogicalWidth(); |
| minPreferredLogicalWidth += margin; |
| maxPreferredLogicalWidth += margin; |
| if (!isColumnFlow()) { |
| maxLogicalWidth += maxPreferredLogicalWidth; |
| if (isMultiline()) { |
| // For multiline, the min preferred width is if you put a break between each item. |
| minLogicalWidth = std::max(minLogicalWidth, minPreferredLogicalWidth); |
| } else |
| minLogicalWidth += minPreferredLogicalWidth; |
| } else { |
| minLogicalWidth = std::max(minPreferredLogicalWidth, minLogicalWidth); |
| maxLogicalWidth = std::max(maxPreferredLogicalWidth, maxLogicalWidth); |
| } |
| } |
| |
| maxLogicalWidth = std::max(minLogicalWidth, maxLogicalWidth); |
| |
| LayoutUnit scrollbarWidth = instrinsicScrollbarLogicalWidth(); |
| maxLogicalWidth += scrollbarWidth; |
| minLogicalWidth += scrollbarWidth; |
| } |
| |
| static int synthesizedBaselineFromContentBox(const RenderBox& box, LineDirectionMode direction) |
| { |
| return direction == HorizontalLine ? box.borderTop() + box.paddingTop() + box.contentHeight() : box.borderRight() + box.paddingRight() + box.contentWidth(); |
| } |
| |
| int RenderFlexibleBox::baselinePosition(FontBaseline, bool, LineDirectionMode direction, LinePositionMode mode) const |
| { |
| ASSERT(mode == PositionOnContainingLine); |
| int baseline = firstLineBoxBaseline(); |
| if (baseline == -1) |
| baseline = synthesizedBaselineFromContentBox(*this, direction); |
| |
| return beforeMarginInLineDirection(direction) + baseline; |
| } |
| |
| int RenderFlexibleBox::firstLineBoxBaseline() const |
| { |
| if (isWritingModeRoot() || m_numberOfInFlowChildrenOnFirstLine <= 0) |
| return -1; |
| RenderBox* baselineChild = 0; |
| int childNumber = 0; |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| if (alignmentForChild(*child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(*child)) { |
| baselineChild = child; |
| break; |
| } |
| if (!baselineChild) |
| baselineChild = child; |
| |
| ++childNumber; |
| if (childNumber == m_numberOfInFlowChildrenOnFirstLine) |
| break; |
| } |
| |
| if (!baselineChild) |
| return -1; |
| |
| if (!isColumnFlow() && hasOrthogonalFlow(*baselineChild)) |
| return crossAxisExtentForChild(*baselineChild) + baselineChild->logicalTop(); |
| if (isColumnFlow() && !hasOrthogonalFlow(*baselineChild)) |
| return mainAxisExtentForChild(*baselineChild) + baselineChild->logicalTop(); |
| |
| int baseline = baselineChild->firstLineBoxBaseline(); |
| if (baseline == -1) { |
| // FIXME: We should pass |direction| into firstLineBoxBaseline and stop bailing out if we're a writing mode root. |
| // This would also fix some cases where the flexbox is orthogonal to its container. |
| LineDirectionMode direction = isHorizontalWritingMode() ? HorizontalLine : VerticalLine; |
| return synthesizedBaselineFromContentBox(*baselineChild, direction) + baselineChild->logicalTop(); |
| } |
| |
| return baseline + baselineChild->logicalTop(); |
| } |
| |
| int RenderFlexibleBox::inlineBlockBaseline(LineDirectionMode direction) const |
| { |
| int baseline = firstLineBoxBaseline(); |
| if (baseline != -1) |
| return baseline; |
| |
| int marginAscent = direction == HorizontalLine ? marginTop() : marginRight(); |
| return synthesizedBaselineFromContentBox(*this, direction) + marginAscent; |
| } |
| |
| void RenderFlexibleBox::removeChild(RenderObject* child) |
| { |
| RenderBlock::removeChild(child); |
| m_intrinsicSizeAlongMainAxis.remove(child); |
| } |
| |
| void RenderFlexibleBox::styleDidChange(StyleDifference diff, const RenderStyle* oldStyle) |
| { |
| RenderBlock::styleDidChange(diff, oldStyle); |
| |
| if (oldStyle && oldStyle->alignItems() == ItemPositionStretch && diff.needsFullLayout()) { |
| // Flex items that were previously stretching need to be relayed out so we can compute new available cross axis space. |
| // This is only necessary for stretching since other alignment values don't change the size of the box. |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| ItemPosition previousAlignment = RenderStyle::resolveAlignment(oldStyle, child->style()); |
| if (previousAlignment == ItemPositionStretch && previousAlignment != RenderStyle::resolveAlignment(style(), child->style())) |
| child->setChildNeedsLayout(MarkOnlyThis); |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::layoutBlock(bool relayoutChildren) |
| { |
| ASSERT(needsLayout()); |
| |
| if (!relayoutChildren && simplifiedLayout()) |
| return; |
| |
| if (updateLogicalWidthAndColumnWidth()) |
| relayoutChildren = true; |
| |
| LayoutUnit previousHeight = logicalHeight(); |
| setLogicalHeight(borderAndPaddingLogicalHeight() + scrollbarLogicalHeight()); |
| |
| { |
| TextAutosizer::LayoutScope textAutosizerLayoutScope(this); |
| LayoutState state(*this, locationOffset()); |
| |
| m_numberOfInFlowChildrenOnFirstLine = -1; |
| |
| RenderBlock::startDelayUpdateScrollInfo(); |
| |
| prepareOrderIteratorAndMargins(); |
| |
| ChildFrameRects oldChildRects; |
| appendChildFrameRects(oldChildRects); |
| |
| layoutFlexItems(relayoutChildren); |
| |
| RenderBlock::finishDelayUpdateScrollInfo(); |
| |
| if (logicalHeight() != previousHeight) |
| relayoutChildren = true; |
| |
| layoutPositionedObjects(relayoutChildren || isDocumentElement()); |
| |
| // FIXME: css3/flexbox/repaint-rtl-column.html seems to issue paint invalidations for more overflow than it needs to. |
| computeOverflow(clientLogicalBottomAfterRepositioning()); |
| } |
| |
| updateLayerTransformAfterLayout(); |
| |
| // Update our scroll information if we're overflow:auto/scroll/hidden now that we know if |
| // we overflow or not. |
| updateScrollInfoAfterLayout(); |
| |
| clearNeedsLayout(); |
| } |
| |
| void RenderFlexibleBox::appendChildFrameRects(ChildFrameRects& childFrameRects) |
| { |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (!child->isOutOfFlowPositioned()) |
| childFrameRects.append(child->frameRect()); |
| } |
| } |
| |
| void RenderFlexibleBox::paintChildren(PaintInfo& paintInfo, const LayoutPoint& paintOffset) |
| { |
| BlockPainter::paintChildrenOfFlexibleBox(*this, paintInfo, paintOffset); |
| } |
| |
| void RenderFlexibleBox::repositionLogicalHeightDependentFlexItems(Vector<LineContext>& lineContexts) |
| { |
| LayoutUnit crossAxisStartEdge = lineContexts.isEmpty() ? LayoutUnit() : lineContexts[0].crossAxisOffset; |
| alignFlexLines(lineContexts); |
| |
| alignChildren(lineContexts); |
| |
| if (style()->flexWrap() == FlexWrapReverse) |
| flipForWrapReverse(lineContexts, crossAxisStartEdge); |
| |
| // direction:rtl + flex-direction:column means the cross-axis direction is flipped. |
| flipForRightToLeftColumn(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::clientLogicalBottomAfterRepositioning() |
| { |
| LayoutUnit maxChildLogicalBottom = 0; |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| LayoutUnit childLogicalBottom = logicalTopForChild(child) + logicalHeightForChild(child) + marginAfterForChild(child); |
| maxChildLogicalBottom = std::max(maxChildLogicalBottom, childLogicalBottom); |
| } |
| return std::max(clientLogicalBottom(), maxChildLogicalBottom + paddingAfter()); |
| } |
| |
| bool RenderFlexibleBox::hasOrthogonalFlow(RenderBox& child) const |
| { |
| // FIXME: If the child is a flexbox, then we need to check isHorizontalFlow. |
| return isHorizontalFlow() != child.isHorizontalWritingMode(); |
| } |
| |
| bool RenderFlexibleBox::isColumnFlow() const |
| { |
| return style()->isColumnFlexDirection(); |
| } |
| |
| bool RenderFlexibleBox::isHorizontalFlow() const |
| { |
| if (isHorizontalWritingMode()) |
| return !isColumnFlow(); |
| return isColumnFlow(); |
| } |
| |
| bool RenderFlexibleBox::isLeftToRightFlow() const |
| { |
| if (isColumnFlow()) |
| return style()->writingMode() == TopToBottomWritingMode || style()->writingMode() == LeftToRightWritingMode; |
| return style()->isLeftToRightDirection() ^ (style()->flexDirection() == FlowRowReverse); |
| } |
| |
| bool RenderFlexibleBox::isMultiline() const |
| { |
| return style()->flexWrap() != FlexNoWrap; |
| } |
| |
| Length RenderFlexibleBox::flexBasisForChild(RenderBox& child) const |
| { |
| Length flexLength = child.style()->flexBasis(); |
| if (flexLength.isAuto()) |
| flexLength = isHorizontalFlow() ? child.style()->width() : child.style()->height(); |
| return flexLength; |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.height() : child.width(); |
| } |
| |
| static inline LayoutUnit constrainedChildIntrinsicContentLogicalHeight(RenderBox& child) |
| { |
| LayoutUnit childIntrinsicContentLogicalHeight = child.intrinsicContentLogicalHeight(); |
| return child.constrainLogicalHeightByMinMax(childIntrinsicContentLogicalHeight + child.borderAndPaddingLogicalHeight(), childIntrinsicContentLogicalHeight); |
| } |
| |
| LayoutUnit RenderFlexibleBox::childIntrinsicHeight(RenderBox& child) const |
| { |
| if (child.isHorizontalWritingMode() && needToStretchChildLogicalHeight(child)) |
| return constrainedChildIntrinsicContentLogicalHeight(child); |
| return child.height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::childIntrinsicWidth(RenderBox& child) const |
| { |
| if (!child.isHorizontalWritingMode() && needToStretchChildLogicalHeight(child)) |
| return constrainedChildIntrinsicContentLogicalHeight(child); |
| return child.width(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisIntrinsicExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? childIntrinsicHeight(child) : childIntrinsicWidth(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.width() : child.height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisExtent() const |
| { |
| return isHorizontalFlow() ? height() : width(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisExtent() const |
| { |
| return isHorizontalFlow() ? width() : height(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisContentExtent() const |
| { |
| return isHorizontalFlow() ? contentHeight() : contentWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisContentExtent(LayoutUnit contentLogicalHeight) |
| { |
| if (isColumnFlow()) { |
| LogicalExtentComputedValues computedValues; |
| LayoutUnit borderPaddingAndScrollbar = borderAndPaddingLogicalHeight() + scrollbarLogicalHeight(); |
| LayoutUnit borderBoxLogicalHeight = contentLogicalHeight + borderPaddingAndScrollbar; |
| computeLogicalHeight(borderBoxLogicalHeight, logicalTop(), computedValues); |
| if (computedValues.m_extent == LayoutUnit::max()) |
| return computedValues.m_extent; |
| return std::max(LayoutUnit(0), computedValues.m_extent - borderPaddingAndScrollbar); |
| } |
| return contentLogicalWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::computeMainAxisExtentForChild(RenderBox& child, SizeType sizeType, const Length& size) |
| { |
| // FIXME: This is wrong for orthogonal flows. It should use the flexbox's writing-mode, not the child's in order |
| // to figure out the logical height/width. |
| if (isColumnFlow()) { |
| // We don't have to check for "auto" here - computeContentLogicalHeight will just return -1 for that case anyway. |
| if (size.isIntrinsic()) |
| child.layoutIfNeeded(); |
| return child.computeContentLogicalHeight(size, child.logicalHeight() - child.borderAndPaddingLogicalHeight()) + child.scrollbarLogicalHeight(); |
| } |
| return child.computeLogicalWidthUsing(sizeType, size, contentLogicalWidth(), this) - child.borderAndPaddingLogicalWidth(); |
| } |
| |
| WritingMode RenderFlexibleBox::transformedWritingMode() const |
| { |
| WritingMode mode = style()->writingMode(); |
| if (!isColumnFlow()) |
| return mode; |
| |
| switch (mode) { |
| case TopToBottomWritingMode: |
| case BottomToTopWritingMode: |
| return style()->isLeftToRightDirection() ? LeftToRightWritingMode : RightToLeftWritingMode; |
| case LeftToRightWritingMode: |
| case RightToLeftWritingMode: |
| return style()->isLeftToRightDirection() ? TopToBottomWritingMode : BottomToTopWritingMode; |
| } |
| ASSERT_NOT_REACHED(); |
| return TopToBottomWritingMode; |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderStart() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? borderLeft() : borderRight(); |
| return isLeftToRightFlow() ? borderTop() : borderBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderEnd() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? borderRight() : borderLeft(); |
| return isLeftToRightFlow() ? borderBottom() : borderTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderBefore() const |
| { |
| switch (transformedWritingMode()) { |
| case TopToBottomWritingMode: |
| return borderTop(); |
| case BottomToTopWritingMode: |
| return borderBottom(); |
| case LeftToRightWritingMode: |
| return borderLeft(); |
| case RightToLeftWritingMode: |
| return borderRight(); |
| } |
| ASSERT_NOT_REACHED(); |
| return borderTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareBorderAfter() const |
| { |
| switch (transformedWritingMode()) { |
| case TopToBottomWritingMode: |
| return borderBottom(); |
| case BottomToTopWritingMode: |
| return borderTop(); |
| case LeftToRightWritingMode: |
| return borderRight(); |
| case RightToLeftWritingMode: |
| return borderLeft(); |
| } |
| ASSERT_NOT_REACHED(); |
| return borderTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingStart() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? paddingLeft() : paddingRight(); |
| return isLeftToRightFlow() ? paddingTop() : paddingBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingEnd() const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? paddingRight() : paddingLeft(); |
| return isLeftToRightFlow() ? paddingBottom() : paddingTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingBefore() const |
| { |
| switch (transformedWritingMode()) { |
| case TopToBottomWritingMode: |
| return paddingTop(); |
| case BottomToTopWritingMode: |
| return paddingBottom(); |
| case LeftToRightWritingMode: |
| return paddingLeft(); |
| case RightToLeftWritingMode: |
| return paddingRight(); |
| } |
| ASSERT_NOT_REACHED(); |
| return paddingTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwarePaddingAfter() const |
| { |
| switch (transformedWritingMode()) { |
| case TopToBottomWritingMode: |
| return paddingBottom(); |
| case BottomToTopWritingMode: |
| return paddingTop(); |
| case LeftToRightWritingMode: |
| return paddingRight(); |
| case RightToLeftWritingMode: |
| return paddingLeft(); |
| } |
| ASSERT_NOT_REACHED(); |
| return paddingTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginStartForChild(RenderBox& child) const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? child.marginLeft() : child.marginRight(); |
| return isLeftToRightFlow() ? child.marginTop() : child.marginBottom(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginEndForChild(RenderBox& child) const |
| { |
| if (isHorizontalFlow()) |
| return isLeftToRightFlow() ? child.marginRight() : child.marginLeft(); |
| return isLeftToRightFlow() ? child.marginBottom() : child.marginTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::flowAwareMarginBeforeForChild(RenderBox& child) const |
| { |
| switch (transformedWritingMode()) { |
| case TopToBottomWritingMode: |
| return child.marginTop(); |
| case BottomToTopWritingMode: |
| return child.marginBottom(); |
| case LeftToRightWritingMode: |
| return child.marginLeft(); |
| case RightToLeftWritingMode: |
| return child.marginRight(); |
| } |
| ASSERT_NOT_REACHED(); |
| return marginTop(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisMarginExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.marginHeight() : child.marginWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisScrollbarExtent() const |
| { |
| return isHorizontalFlow() ? horizontalScrollbarHeight() : verticalScrollbarWidth(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::crossAxisScrollbarExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.horizontalScrollbarHeight() : child.verticalScrollbarWidth(); |
| } |
| |
| LayoutPoint RenderFlexibleBox::flowAwareLocationForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.location() : child.location().transposedPoint(); |
| } |
| |
| void RenderFlexibleBox::setFlowAwareLocationForChild(RenderBox& child, const LayoutPoint& location) |
| { |
| if (isHorizontalFlow()) |
| child.setLocation(location); |
| else |
| child.setLocation(location.transposedPoint()); |
| } |
| |
| LayoutUnit RenderFlexibleBox::mainAxisBorderAndPaddingExtentForChild(RenderBox& child) const |
| { |
| return isHorizontalFlow() ? child.borderAndPaddingWidth() : child.borderAndPaddingHeight(); |
| } |
| |
| static inline bool preferredMainAxisExtentDependsOnLayout(const Length& flexBasis, bool hasInfiniteLineLength) |
| { |
| return flexBasis.isAuto() || (flexBasis.isPercent() && hasInfiniteLineLength); |
| } |
| |
| bool RenderFlexibleBox::childPreferredMainAxisContentExtentRequiresLayout(RenderBox& child, bool hasInfiniteLineLength) const |
| { |
| return preferredMainAxisExtentDependsOnLayout(flexBasisForChild(child), hasInfiniteLineLength) && hasOrthogonalFlow(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::preferredMainAxisContentExtentForChild(RenderBox& child, bool hasInfiniteLineLength, bool relayoutChildren) |
| { |
| child.clearOverrideSize(); |
| |
| if (child.isImage() || child.isVideo() || child.isCanvas()) |
| UseCounter::count(document(), UseCounter::AspectRatioFlexItem); |
| |
| Length flexBasis = flexBasisForChild(child); |
| if (preferredMainAxisExtentDependsOnLayout(flexBasis, hasInfiniteLineLength)) { |
| LayoutUnit mainAxisExtent; |
| if (hasOrthogonalFlow(child)) { |
| if (child.needsLayout() || relayoutChildren || !m_intrinsicSizeAlongMainAxis.contains(&child)) { |
| m_intrinsicSizeAlongMainAxis.remove(&child); |
| child.forceChildLayout(); |
| m_intrinsicSizeAlongMainAxis.set(&child, child.logicalHeight()); |
| } |
| mainAxisExtent = m_intrinsicSizeAlongMainAxis.get(&child); |
| } else { |
| mainAxisExtent = child.maxPreferredLogicalWidth(); |
| } |
| ASSERT(mainAxisExtent - mainAxisBorderAndPaddingExtentForChild(child) >= 0); |
| return mainAxisExtent - mainAxisBorderAndPaddingExtentForChild(child); |
| } |
| return std::max(LayoutUnit(0), computeMainAxisExtentForChild(child, MainOrPreferredSize, flexBasis)); |
| } |
| |
| void RenderFlexibleBox::layoutFlexItems(bool relayoutChildren) |
| { |
| Vector<LineContext> lineContexts; |
| OrderedFlexItemList orderedChildren; |
| LayoutUnit sumFlexBaseSize; |
| double totalFlexGrow; |
| double totalWeightedFlexShrink; |
| LayoutUnit sumHypotheticalMainSize; |
| |
| Vector<LayoutUnit, 16> childSizes; |
| |
| m_orderIterator.first(); |
| LayoutUnit crossAxisOffset = flowAwareBorderBefore() + flowAwarePaddingBefore(); |
| bool hasInfiniteLineLength = false; |
| while (computeNextFlexLine(orderedChildren, sumFlexBaseSize, totalFlexGrow, totalWeightedFlexShrink, sumHypotheticalMainSize, hasInfiniteLineLength, relayoutChildren)) { |
| LayoutUnit containerMainInnerSize = mainAxisContentExtent(sumHypotheticalMainSize); |
| LayoutUnit availableFreeSpace = containerMainInnerSize - sumFlexBaseSize; |
| FlexSign flexSign = (sumHypotheticalMainSize < containerMainInnerSize) ? PositiveFlexibility : NegativeFlexibility; |
| InflexibleFlexItemSize inflexibleItems; |
| childSizes.reserveCapacity(orderedChildren.size()); |
| while (!resolveFlexibleLengths(flexSign, orderedChildren, availableFreeSpace, totalFlexGrow, totalWeightedFlexShrink, inflexibleItems, childSizes, hasInfiniteLineLength)) { |
| ASSERT(totalFlexGrow >= 0 && totalWeightedFlexShrink >= 0); |
| ASSERT(inflexibleItems.size() > 0); |
| } |
| |
| layoutAndPlaceChildren(crossAxisOffset, orderedChildren, childSizes, availableFreeSpace, relayoutChildren, lineContexts, hasInfiniteLineLength); |
| } |
| if (hasLineIfEmpty()) { |
| // Even if computeNextFlexLine returns true, the flexbox might not have |
| // a line because all our children might be out of flow positioned. |
| // Instead of just checking if we have a line, make sure the flexbox |
| // has at least a line's worth of height to cover this case. |
| LayoutUnit minHeight = borderAndPaddingLogicalHeight() |
| + lineHeight(true, isHorizontalWritingMode() ? HorizontalLine : VerticalLine, PositionOfInteriorLineBoxes) |
| + scrollbarLogicalHeight(); |
| if (height() < minHeight) |
| setLogicalHeight(minHeight); |
| } |
| |
| updateLogicalHeight(); |
| repositionLogicalHeightDependentFlexItems(lineContexts); |
| } |
| |
| LayoutUnit RenderFlexibleBox::autoMarginOffsetInMainAxis(const OrderedFlexItemList& children, LayoutUnit& availableFreeSpace) |
| { |
| if (availableFreeSpace <= 0) |
| return 0; |
| |
| int numberOfAutoMargins = 0; |
| bool isHorizontal = isHorizontalFlow(); |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| if (isHorizontal) { |
| if (child->style()->marginLeft().isAuto()) |
| ++numberOfAutoMargins; |
| if (child->style()->marginRight().isAuto()) |
| ++numberOfAutoMargins; |
| } else { |
| if (child->style()->marginTop().isAuto()) |
| ++numberOfAutoMargins; |
| if (child->style()->marginBottom().isAuto()) |
| ++numberOfAutoMargins; |
| } |
| } |
| if (!numberOfAutoMargins) |
| return 0; |
| |
| LayoutUnit sizeOfAutoMargin = availableFreeSpace / numberOfAutoMargins; |
| availableFreeSpace = 0; |
| return sizeOfAutoMargin; |
| } |
| |
| void RenderFlexibleBox::updateAutoMarginsInMainAxis(RenderBox& child, LayoutUnit autoMarginOffset) |
| { |
| ASSERT(autoMarginOffset >= 0); |
| |
| if (isHorizontalFlow()) { |
| if (child.style()->marginLeft().isAuto()) |
| child.setMarginLeft(autoMarginOffset); |
| if (child.style()->marginRight().isAuto()) |
| child.setMarginRight(autoMarginOffset); |
| } else { |
| if (child.style()->marginTop().isAuto()) |
| child.setMarginTop(autoMarginOffset); |
| if (child.style()->marginBottom().isAuto()) |
| child.setMarginBottom(autoMarginOffset); |
| } |
| } |
| |
| bool RenderFlexibleBox::hasAutoMarginsInCrossAxis(RenderBox& child) const |
| { |
| if (isHorizontalFlow()) |
| return child.style()->marginTop().isAuto() || child.style()->marginBottom().isAuto(); |
| return child.style()->marginLeft().isAuto() || child.style()->marginRight().isAuto(); |
| } |
| |
| LayoutUnit RenderFlexibleBox::availableAlignmentSpaceForChild(LayoutUnit lineCrossAxisExtent, RenderBox& child) |
| { |
| ASSERT(!child.isOutOfFlowPositioned()); |
| LayoutUnit childCrossExtent = crossAxisMarginExtentForChild(child) + crossAxisExtentForChild(child); |
| return lineCrossAxisExtent - childCrossExtent; |
| } |
| |
| LayoutUnit RenderFlexibleBox::availableAlignmentSpaceForChildBeforeStretching(LayoutUnit lineCrossAxisExtent, RenderBox& child) |
| { |
| ASSERT(!child.isOutOfFlowPositioned()); |
| LayoutUnit childCrossExtent = crossAxisMarginExtentForChild(child) + crossAxisIntrinsicExtentForChild(child); |
| return lineCrossAxisExtent - childCrossExtent; |
| } |
| |
| bool RenderFlexibleBox::updateAutoMarginsInCrossAxis(RenderBox& child, LayoutUnit availableAlignmentSpace) |
| { |
| ASSERT(!child.isOutOfFlowPositioned()); |
| ASSERT(availableAlignmentSpace >= 0); |
| |
| bool isHorizontal = isHorizontalFlow(); |
| Length topOrLeft = isHorizontal ? child.style()->marginTop() : child.style()->marginLeft(); |
| Length bottomOrRight = isHorizontal ? child.style()->marginBottom() : child.style()->marginRight(); |
| if (topOrLeft.isAuto() && bottomOrRight.isAuto()) { |
| adjustAlignmentForChild(child, availableAlignmentSpace / 2); |
| if (isHorizontal) { |
| child.setMarginTop(availableAlignmentSpace / 2); |
| child.setMarginBottom(availableAlignmentSpace / 2); |
| } else { |
| child.setMarginLeft(availableAlignmentSpace / 2); |
| child.setMarginRight(availableAlignmentSpace / 2); |
| } |
| return true; |
| } |
| bool shouldAdjustTopOrLeft = true; |
| if (isColumnFlow() && !child.style()->isLeftToRightDirection()) { |
| // For column flows, only make this adjustment if topOrLeft corresponds to the "before" margin, |
| // so that flipForRightToLeftColumn will do the right thing. |
| shouldAdjustTopOrLeft = false; |
| } |
| if (!isColumnFlow() && child.style()->isFlippedBlocksWritingMode()) { |
| // If we are a flipped writing mode, we need to adjust the opposite side. This is only needed |
| // for row flows because this only affects the block-direction axis. |
| shouldAdjustTopOrLeft = false; |
| } |
| |
| if (topOrLeft.isAuto()) { |
| if (shouldAdjustTopOrLeft) |
| adjustAlignmentForChild(child, availableAlignmentSpace); |
| |
| if (isHorizontal) |
| child.setMarginTop(availableAlignmentSpace); |
| else |
| child.setMarginLeft(availableAlignmentSpace); |
| return true; |
| } |
| if (bottomOrRight.isAuto()) { |
| if (!shouldAdjustTopOrLeft) |
| adjustAlignmentForChild(child, availableAlignmentSpace); |
| |
| if (isHorizontal) |
| child.setMarginBottom(availableAlignmentSpace); |
| else |
| child.setMarginRight(availableAlignmentSpace); |
| return true; |
| } |
| return false; |
| } |
| |
| LayoutUnit RenderFlexibleBox::marginBoxAscentForChild(RenderBox& child) |
| { |
| LayoutUnit ascent = child.firstLineBoxBaseline(); |
| if (ascent == -1) |
| ascent = crossAxisExtentForChild(child); |
| return ascent + flowAwareMarginBeforeForChild(child); |
| } |
| |
| LayoutUnit RenderFlexibleBox::computeChildMarginValue(Length margin) |
| { |
| // When resolving the margins, we use the content size for resolving percent and calc (for percents in calc expressions) margins. |
| // Fortunately, percent margins are always computed with respect to the block's width, even for margin-top and margin-bottom. |
| LayoutUnit availableSize = contentLogicalWidth(); |
| return minimumValueForLength(margin, availableSize); |
| } |
| |
| void RenderFlexibleBox::prepareOrderIteratorAndMargins() |
| { |
| OrderIteratorPopulator populator(m_orderIterator); |
| |
| for (RenderBox* child = firstChildBox(); child; child = child->nextSiblingBox()) { |
| populator.collectChild(child); |
| |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| |
| // Before running the flex algorithm, 'auto' has a margin of 0. |
| // Also, if we're not auto sizing, we don't do a layout that computes the start/end margins. |
| if (isHorizontalFlow()) { |
| child->setMarginLeft(computeChildMarginValue(child->style()->marginLeft())); |
| child->setMarginRight(computeChildMarginValue(child->style()->marginRight())); |
| } else { |
| child->setMarginTop(computeChildMarginValue(child->style()->marginTop())); |
| child->setMarginBottom(computeChildMarginValue(child->style()->marginBottom())); |
| } |
| } |
| } |
| |
| LayoutUnit RenderFlexibleBox::adjustChildSizeForMinAndMax(RenderBox& child, LayoutUnit childSize) |
| { |
| Length max = isHorizontalFlow() ? child.style()->maxWidth() : child.style()->maxHeight(); |
| if (max.isSpecifiedOrIntrinsic()) { |
| LayoutUnit maxExtent = computeMainAxisExtentForChild(child, MaxSize, max); |
| if (maxExtent != -1 && childSize > maxExtent) |
| childSize = maxExtent; |
| } |
| |
| Length min = isHorizontalFlow() ? child.style()->minWidth() : child.style()->minHeight(); |
| LayoutUnit minExtent = 0; |
| if (min.isSpecifiedOrIntrinsic()) |
| minExtent = computeMainAxisExtentForChild(child, MinSize, min); |
| return std::max(childSize, minExtent); |
| } |
| |
| bool RenderFlexibleBox::computeNextFlexLine(OrderedFlexItemList& orderedChildren, LayoutUnit& sumFlexBaseSize, double& totalFlexGrow, double& totalWeightedFlexShrink, LayoutUnit& sumHypotheticalMainSize, bool& hasInfiniteLineLength, bool relayoutChildren) |
| { |
| orderedChildren.clear(); |
| sumFlexBaseSize = 0; |
| totalFlexGrow = totalWeightedFlexShrink = 0; |
| sumHypotheticalMainSize = 0; |
| |
| if (!m_orderIterator.currentChild()) |
| return false; |
| |
| LayoutUnit lineBreakLength = mainAxisContentExtent(LayoutUnit::max()); |
| hasInfiniteLineLength = lineBreakLength == LayoutUnit::max(); |
| |
| bool lineHasInFlowItem = false; |
| |
| for (RenderBox* child = m_orderIterator.currentChild(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) { |
| orderedChildren.append(child); |
| continue; |
| } |
| |
| LayoutUnit childMainAxisExtent = preferredMainAxisContentExtentForChild(*child, hasInfiniteLineLength, relayoutChildren); |
| LayoutUnit childMainAxisMarginBorderPadding = mainAxisBorderAndPaddingExtentForChild(*child) |
| + (isHorizontalFlow() ? child->marginWidth() : child->marginHeight()); |
| LayoutUnit childFlexBaseSize = childMainAxisExtent + childMainAxisMarginBorderPadding; |
| |
| LayoutUnit childMinMaxAppliedMainAxisExtent = adjustChildSizeForMinAndMax(*child, childMainAxisExtent); |
| LayoutUnit childHypotheticalMainSize = childMinMaxAppliedMainAxisExtent + childMainAxisMarginBorderPadding; |
| |
| if (isMultiline() && sumHypotheticalMainSize + childHypotheticalMainSize > lineBreakLength && lineHasInFlowItem) |
| break; |
| orderedChildren.append(child); |
| lineHasInFlowItem = true; |
| sumFlexBaseSize += childFlexBaseSize; |
| totalFlexGrow += child->style()->flexGrow(); |
| totalWeightedFlexShrink += child->style()->flexShrink() * childMainAxisExtent; |
| sumHypotheticalMainSize += childHypotheticalMainSize; |
| } |
| return true; |
| } |
| |
| void RenderFlexibleBox::freezeViolations(const Vector<Violation>& violations, LayoutUnit& availableFreeSpace, double& totalFlexGrow, double& totalWeightedFlexShrink, InflexibleFlexItemSize& inflexibleItems, bool hasInfiniteLineLength) |
| { |
| for (size_t i = 0; i < violations.size(); ++i) { |
| RenderBox* child = violations[i].child; |
| LayoutUnit childSize = violations[i].childSize; |
| LayoutUnit preferredChildSize = preferredMainAxisContentExtentForChild(*child, hasInfiniteLineLength); |
| availableFreeSpace -= childSize - preferredChildSize; |
| totalFlexGrow -= child->style()->flexGrow(); |
| totalWeightedFlexShrink -= child->style()->flexShrink() * preferredChildSize; |
| inflexibleItems.set(child, childSize); |
| } |
| } |
| |
| // Returns true if we successfully ran the algorithm and sized the flex items. |
| bool RenderFlexibleBox::resolveFlexibleLengths(FlexSign flexSign, const OrderedFlexItemList& children, LayoutUnit& availableFreeSpace, double& totalFlexGrow, double& totalWeightedFlexShrink, InflexibleFlexItemSize& inflexibleItems, Vector<LayoutUnit, 16>& childSizes, bool hasInfiniteLineLength) |
| { |
| childSizes.resize(0); |
| LayoutUnit totalViolation = 0; |
| LayoutUnit usedFreeSpace = 0; |
| Vector<Violation> minViolations; |
| Vector<Violation> maxViolations; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (child->isOutOfFlowPositioned()) { |
| childSizes.append(0); |
| continue; |
| } |
| |
| if (inflexibleItems.contains(child)) |
| childSizes.append(inflexibleItems.get(child)); |
| else { |
| LayoutUnit preferredChildSize = preferredMainAxisContentExtentForChild(*child, hasInfiniteLineLength); |
| LayoutUnit childSize = preferredChildSize; |
| double extraSpace = 0; |
| if (availableFreeSpace > 0 && totalFlexGrow > 0 && flexSign == PositiveFlexibility && std::isfinite(totalFlexGrow)) |
| extraSpace = availableFreeSpace * child->style()->flexGrow() / totalFlexGrow; |
| else if (availableFreeSpace < 0 && totalWeightedFlexShrink > 0 && flexSign == NegativeFlexibility && std::isfinite(totalWeightedFlexShrink)) |
| extraSpace = availableFreeSpace * child->style()->flexShrink() * preferredChildSize / totalWeightedFlexShrink; |
| if (std::isfinite(extraSpace)) |
| childSize += LayoutUnit::fromFloatRound(extraSpace); |
| |
| LayoutUnit adjustedChildSize = adjustChildSizeForMinAndMax(*child, childSize); |
| childSizes.append(adjustedChildSize); |
| usedFreeSpace += adjustedChildSize - preferredChildSize; |
| |
| LayoutUnit violation = adjustedChildSize - childSize; |
| if (violation > 0) |
| minViolations.append(Violation(child, adjustedChildSize)); |
| else if (violation < 0) |
| maxViolations.append(Violation(child, adjustedChildSize)); |
| totalViolation += violation; |
| } |
| } |
| |
| if (totalViolation) |
| freezeViolations(totalViolation < 0 ? maxViolations : minViolations, availableFreeSpace, totalFlexGrow, totalWeightedFlexShrink, inflexibleItems, hasInfiniteLineLength); |
| else |
| availableFreeSpace -= usedFreeSpace; |
| |
| return !totalViolation; |
| } |
| |
| static LayoutUnit initialJustifyContentOffset(LayoutUnit availableFreeSpace, EJustifyContent justifyContent, unsigned numberOfChildren) |
| { |
| if (justifyContent == JustifyFlexEnd) |
| return availableFreeSpace; |
| if (justifyContent == JustifyCenter) |
| return availableFreeSpace / 2; |
| if (justifyContent == JustifySpaceAround) { |
| if (availableFreeSpace > 0 && numberOfChildren) |
| return availableFreeSpace / (2 * numberOfChildren); |
| else |
| return availableFreeSpace / 2; |
| } |
| return 0; |
| } |
| |
| static LayoutUnit justifyContentSpaceBetweenChildren(LayoutUnit availableFreeSpace, EJustifyContent justifyContent, unsigned numberOfChildren) |
| { |
| if (availableFreeSpace > 0 && numberOfChildren > 1) { |
| if (justifyContent == JustifySpaceBetween) |
| return availableFreeSpace / (numberOfChildren - 1); |
| if (justifyContent == JustifySpaceAround) |
| return availableFreeSpace / numberOfChildren; |
| } |
| return 0; |
| } |
| |
| void RenderFlexibleBox::setLogicalOverrideSize(RenderBox& child, LayoutUnit childPreferredSize) |
| { |
| if (hasOrthogonalFlow(child)) |
| child.setOverrideLogicalContentHeight(childPreferredSize - child.borderAndPaddingLogicalHeight()); |
| else |
| child.setOverrideLogicalContentWidth(childPreferredSize - child.borderAndPaddingLogicalWidth()); |
| } |
| |
| void RenderFlexibleBox::prepareChildForPositionedLayout(RenderBox& child, LayoutUnit mainAxisOffset, LayoutUnit crossAxisOffset, PositionedLayoutMode layoutMode) |
| { |
| ASSERT(child.isOutOfFlowPositioned()); |
| child.containingBlock()->insertPositionedObject(&child); |
| RenderLayer* childLayer = child.layer(); |
| LayoutUnit inlinePosition = isColumnFlow() ? crossAxisOffset : mainAxisOffset; |
| if (layoutMode == FlipForRowReverse && style()->flexDirection() == FlowRowReverse) |
| inlinePosition = mainAxisExtent() - mainAxisOffset; |
| childLayer->setStaticInlinePosition(inlinePosition); |
| |
| LayoutUnit staticBlockPosition = isColumnFlow() ? mainAxisOffset : crossAxisOffset; |
| if (childLayer->staticBlockPosition() != staticBlockPosition) { |
| childLayer->setStaticBlockPosition(staticBlockPosition); |
| if (child.style()->hasStaticBlockPosition(style()->isHorizontalWritingMode())) |
| child.setChildNeedsLayout(MarkOnlyThis); |
| } |
| } |
| |
| ItemPosition RenderFlexibleBox::alignmentForChild(RenderBox& child) const |
| { |
| ItemPosition align = RenderStyle::resolveAlignment(style(), child.style()); |
| |
| if (align == ItemPositionBaseline && hasOrthogonalFlow(child)) |
| align = ItemPositionFlexStart; |
| |
| if (style()->flexWrap() == FlexWrapReverse) { |
| if (align == ItemPositionFlexStart) |
| align = ItemPositionFlexEnd; |
| else if (align == ItemPositionFlexEnd) |
| align = ItemPositionFlexStart; |
| } |
| |
| return align; |
| } |
| |
| size_t RenderFlexibleBox::numberOfInFlowPositionedChildren(const OrderedFlexItemList& children) const |
| { |
| size_t count = 0; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| if (!child->isOutOfFlowPositioned()) |
| ++count; |
| } |
| return count; |
| } |
| |
| void RenderFlexibleBox::resetAutoMarginsAndLogicalTopInCrossAxis(RenderBox& child) |
| { |
| if (hasAutoMarginsInCrossAxis(child)) { |
| child.updateLogicalHeight(); |
| if (isHorizontalFlow()) { |
| if (child.style()->marginTop().isAuto()) |
| child.setMarginTop(0); |
| if (child.style()->marginBottom().isAuto()) |
| child.setMarginBottom(0); |
| } else { |
| if (child.style()->marginLeft().isAuto()) |
| child.setMarginLeft(0); |
| if (child.style()->marginRight().isAuto()) |
| child.setMarginRight(0); |
| } |
| } |
| } |
| |
| bool RenderFlexibleBox::needToStretchChildLogicalHeight(RenderBox& child) const |
| { |
| if (alignmentForChild(child) != ItemPositionStretch) |
| return false; |
| |
| return isHorizontalFlow() && child.style()->height().isAuto(); |
| } |
| |
| void RenderFlexibleBox::layoutAndPlaceChildren(LayoutUnit& crossAxisOffset, const OrderedFlexItemList& children, const Vector<LayoutUnit, 16>& childSizes, LayoutUnit availableFreeSpace, bool relayoutChildren, Vector<LineContext>& lineContexts, bool hasInfiniteLineLength) |
| { |
| ASSERT(childSizes.size() == children.size()); |
| |
| size_t numberOfChildrenForJustifyContent = numberOfInFlowPositionedChildren(children); |
| LayoutUnit autoMarginOffset = autoMarginOffsetInMainAxis(children, availableFreeSpace); |
| LayoutUnit mainAxisOffset = flowAwareBorderStart() + flowAwarePaddingStart(); |
| mainAxisOffset += initialJustifyContentOffset(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| if (style()->flexDirection() == FlowRowReverse) |
| mainAxisOffset += isHorizontalFlow() ? verticalScrollbarWidth() : horizontalScrollbarHeight(); |
| |
| LayoutUnit totalMainExtent = mainAxisExtent(); |
| LayoutUnit maxAscent = 0, maxDescent = 0; // Used when align-items: baseline. |
| LayoutUnit maxChildCrossAxisExtent = 0; |
| size_t seenInFlowPositionedChildren = 0; |
| bool shouldFlipMainAxis = !isColumnFlow() && !isLeftToRightFlow(); |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| |
| if (child->isOutOfFlowPositioned()) { |
| prepareChildForPositionedLayout(*child, mainAxisOffset, crossAxisOffset, FlipForRowReverse); |
| continue; |
| } |
| |
| // FIXME Investigate if this can be removed based on other flags. crbug.com/370010 |
| child->setMayNeedPaintInvalidation(true); |
| |
| LayoutUnit childPreferredSize = childSizes[i] + mainAxisBorderAndPaddingExtentForChild(*child); |
| setLogicalOverrideSize(*child, childPreferredSize); |
| if (childPreferredSize != mainAxisExtentForChild(*child)) { |
| child->setChildNeedsLayout(MarkOnlyThis); |
| } else { |
| // To avoid double applying margin changes in updateAutoMarginsInCrossAxis, we reset the margins here. |
| resetAutoMarginsAndLogicalTopInCrossAxis(*child); |
| } |
| // We may have already forced relayout for orthogonal flowing children in preferredMainAxisContentExtentForChild. |
| bool forceChildRelayout = relayoutChildren && !childPreferredMainAxisContentExtentRequiresLayout(*child, hasInfiniteLineLength); |
| updateBlockChildDirtyBitsBeforeLayout(forceChildRelayout, child); |
| child->layoutIfNeeded(); |
| |
| updateAutoMarginsInMainAxis(*child, autoMarginOffset); |
| |
| LayoutUnit childCrossAxisMarginBoxExtent; |
| if (alignmentForChild(*child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(*child)) { |
| LayoutUnit ascent = marginBoxAscentForChild(*child); |
| LayoutUnit descent = (crossAxisMarginExtentForChild(*child) + crossAxisExtentForChild(*child)) - ascent; |
| |
| maxAscent = std::max(maxAscent, ascent); |
| maxDescent = std::max(maxDescent, descent); |
| |
| childCrossAxisMarginBoxExtent = maxAscent + maxDescent; |
| } else { |
| childCrossAxisMarginBoxExtent = crossAxisIntrinsicExtentForChild(*child) + crossAxisMarginExtentForChild(*child) + crossAxisScrollbarExtentForChild(*child); |
| } |
| if (!isColumnFlow()) |
| setLogicalHeight(std::max(logicalHeight(), crossAxisOffset + flowAwareBorderAfter() + flowAwarePaddingAfter() + childCrossAxisMarginBoxExtent + crossAxisScrollbarExtent())); |
| maxChildCrossAxisExtent = std::max(maxChildCrossAxisExtent, childCrossAxisMarginBoxExtent); |
| |
| mainAxisOffset += flowAwareMarginStartForChild(*child); |
| |
| LayoutUnit childMainExtent = mainAxisExtentForChild(*child); |
| // In an RTL column situation, this will apply the margin-right/margin-end on the left. |
| // This will be fixed later in flipForRightToLeftColumn. |
| LayoutPoint childLocation(shouldFlipMainAxis ? totalMainExtent - mainAxisOffset - childMainExtent : mainAxisOffset, |
| crossAxisOffset + flowAwareMarginBeforeForChild(*child)); |
| |
| // FIXME: Supporting layout deltas. |
| setFlowAwareLocationForChild(*child, childLocation); |
| mainAxisOffset += childMainExtent + flowAwareMarginEndForChild(*child); |
| |
| ++seenInFlowPositionedChildren; |
| if (seenInFlowPositionedChildren < numberOfChildrenForJustifyContent) |
| mainAxisOffset += justifyContentSpaceBetweenChildren(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| } |
| |
| if (isColumnFlow()) |
| setLogicalHeight(mainAxisOffset + flowAwareBorderEnd() + flowAwarePaddingEnd() + scrollbarLogicalHeight()); |
| |
| if (style()->flexDirection() == FlowColumnReverse) { |
| // We have to do an extra pass for column-reverse to reposition the flex items since the start depends |
| // on the height of the flexbox, which we only know after we've positioned all the flex items. |
| updateLogicalHeight(); |
| layoutColumnReverse(children, crossAxisOffset, availableFreeSpace); |
| } |
| |
| if (m_numberOfInFlowChildrenOnFirstLine == -1) |
| m_numberOfInFlowChildrenOnFirstLine = seenInFlowPositionedChildren; |
| lineContexts.append(LineContext(crossAxisOffset, maxChildCrossAxisExtent, children.size(), maxAscent)); |
| crossAxisOffset += maxChildCrossAxisExtent; |
| } |
| |
| void RenderFlexibleBox::layoutColumnReverse(const OrderedFlexItemList& children, LayoutUnit crossAxisOffset, LayoutUnit availableFreeSpace) |
| { |
| // This is similar to the logic in layoutAndPlaceChildren, except we place the children |
| // starting from the end of the flexbox. We also don't need to layout anything since we're |
| // just moving the children to a new position. |
| size_t numberOfChildrenForJustifyContent = numberOfInFlowPositionedChildren(children); |
| LayoutUnit mainAxisOffset = logicalHeight() - flowAwareBorderEnd() - flowAwarePaddingEnd(); |
| mainAxisOffset -= initialJustifyContentOffset(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| mainAxisOffset -= isHorizontalFlow() ? verticalScrollbarWidth() : horizontalScrollbarHeight(); |
| |
| size_t seenInFlowPositionedChildren = 0; |
| for (size_t i = 0; i < children.size(); ++i) { |
| RenderBox* child = children[i]; |
| |
| if (child->isOutOfFlowPositioned()) { |
| child->layer()->setStaticBlockPosition(mainAxisOffset); |
| continue; |
| } |
| mainAxisOffset -= mainAxisExtentForChild(*child) + flowAwareMarginEndForChild(*child); |
| |
| setFlowAwareLocationForChild(*child, LayoutPoint(mainAxisOffset, crossAxisOffset + flowAwareMarginBeforeForChild(*child))); |
| |
| mainAxisOffset -= flowAwareMarginStartForChild(*child); |
| |
| ++seenInFlowPositionedChildren; |
| if (seenInFlowPositionedChildren < numberOfChildrenForJustifyContent) |
| mainAxisOffset -= justifyContentSpaceBetweenChildren(availableFreeSpace, style()->justifyContent(), numberOfChildrenForJustifyContent); |
| } |
| } |
| |
| static LayoutUnit initialAlignContentOffset(LayoutUnit availableFreeSpace, EAlignContent alignContent, unsigned numberOfLines) |
| { |
| if (numberOfLines <= 1) |
| return 0; |
| if (alignContent == AlignContentFlexEnd) |
| return availableFreeSpace; |
| if (alignContent == AlignContentCenter) |
| return availableFreeSpace / 2; |
| if (alignContent == AlignContentSpaceAround) { |
| if (availableFreeSpace > 0 && numberOfLines) |
| return availableFreeSpace / (2 * numberOfLines); |
| if (availableFreeSpace < 0) |
| return availableFreeSpace / 2; |
| } |
| return 0; |
| } |
| |
| static LayoutUnit alignContentSpaceBetweenChildren(LayoutUnit availableFreeSpace, EAlignContent alignContent, unsigned numberOfLines) |
| { |
| if (availableFreeSpace > 0 && numberOfLines > 1) { |
| if (alignContent == AlignContentSpaceBetween) |
| return availableFreeSpace / (numberOfLines - 1); |
| if (alignContent == AlignContentSpaceAround || alignContent == AlignContentStretch) |
| return availableFreeSpace / numberOfLines; |
| } |
| return 0; |
| } |
| |
| void RenderFlexibleBox::alignFlexLines(Vector<LineContext>& lineContexts) |
| { |
| // If we have a single line flexbox or a multiline line flexbox with only one flex line, |
| // the line height is all the available space. |
| // For flex-direction: row, this means we need to use the height, so we do this after calling updateLogicalHeight. |
| if (lineContexts.size() == 1) { |
| lineContexts[0].crossAxisExtent = crossAxisContentExtent(); |
| return; |
| } |
| |
| if (style()->alignContent() == AlignContentFlexStart) |
| return; |
| |
| LayoutUnit availableCrossAxisSpace = crossAxisContentExtent(); |
| for (size_t i = 0; i < lineContexts.size(); ++i) |
| availableCrossAxisSpace -= lineContexts[i].crossAxisExtent; |
| |
| RenderBox* child = m_orderIterator.first(); |
| LayoutUnit lineOffset = initialAlignContentOffset(availableCrossAxisSpace, style()->alignContent(), lineContexts.size()); |
| for (unsigned lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| lineContexts[lineNumber].crossAxisOffset += lineOffset; |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) |
| adjustAlignmentForChild(*child, lineOffset); |
| |
| if (style()->alignContent() == AlignContentStretch && availableCrossAxisSpace > 0) |
| lineContexts[lineNumber].crossAxisExtent += availableCrossAxisSpace / static_cast<unsigned>(lineContexts.size()); |
| |
| lineOffset += alignContentSpaceBetweenChildren(availableCrossAxisSpace, style()->alignContent(), lineContexts.size()); |
| } |
| } |
| |
| void RenderFlexibleBox::adjustAlignmentForChild(RenderBox& child, LayoutUnit delta) |
| { |
| if (child.isOutOfFlowPositioned()) { |
| LayoutUnit staticInlinePosition = child.layer()->staticInlinePosition(); |
| LayoutUnit staticBlockPosition = child.layer()->staticBlockPosition(); |
| LayoutUnit mainAxis = isColumnFlow() ? staticBlockPosition : staticInlinePosition; |
| LayoutUnit crossAxis = isColumnFlow() ? staticInlinePosition : staticBlockPosition; |
| crossAxis += delta; |
| prepareChildForPositionedLayout(child, mainAxis, crossAxis, NoFlipForRowReverse); |
| return; |
| } |
| |
| setFlowAwareLocationForChild(child, flowAwareLocationForChild(child) + LayoutSize(0, delta)); |
| } |
| |
| void RenderFlexibleBox::alignChildren(const Vector<LineContext>& lineContexts) |
| { |
| // Keep track of the space between the baseline edge and the after edge of the box for each line. |
| Vector<LayoutUnit> minMarginAfterBaselines; |
| |
| RenderBox* child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| LayoutUnit minMarginAfterBaseline = LayoutUnit::max(); |
| LayoutUnit lineCrossAxisExtent = lineContexts[lineNumber].crossAxisExtent; |
| LayoutUnit maxAscent = lineContexts[lineNumber].maxAscent; |
| |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| if (child->isOutOfFlowPositioned()) { |
| if (style()->flexWrap() == FlexWrapReverse) |
| adjustAlignmentForChild(*child, lineCrossAxisExtent); |
| continue; |
| } |
| |
| if (updateAutoMarginsInCrossAxis(*child, std::max(LayoutUnit(0), availableAlignmentSpaceForChild(lineCrossAxisExtent, *child)))) |
| continue; |
| |
| switch (alignmentForChild(*child)) { |
| case ItemPositionAuto: |
| ASSERT_NOT_REACHED(); |
| break; |
| case ItemPositionStretch: { |
| applyStretchAlignmentToChild(*child, lineCrossAxisExtent); |
| // Since wrap-reverse flips cross start and cross end, strech children should be aligned with the cross end. |
| if (style()->flexWrap() == FlexWrapReverse) |
| adjustAlignmentForChild(*child, availableAlignmentSpaceForChild(lineCrossAxisExtent, *child)); |
| break; |
| } |
| case ItemPositionFlexStart: |
| break; |
| case ItemPositionFlexEnd: |
| adjustAlignmentForChild(*child, availableAlignmentSpaceForChild(lineCrossAxisExtent, *child)); |
| break; |
| case ItemPositionCenter: |
| adjustAlignmentForChild(*child, availableAlignmentSpaceForChild(lineCrossAxisExtent, *child) / 2); |
| break; |
| case ItemPositionBaseline: { |
| // FIXME: If we get here in columns, we want the use the descent, except we currently can't get the ascent/descent of orthogonal children. |
| // https://bugs.webkit.org/show_bug.cgi?id=98076 |
| LayoutUnit ascent = marginBoxAscentForChild(*child); |
| LayoutUnit startOffset = maxAscent - ascent; |
| adjustAlignmentForChild(*child, startOffset); |
| |
| if (style()->flexWrap() == FlexWrapReverse) |
| minMarginAfterBaseline = std::min(minMarginAfterBaseline, availableAlignmentSpaceForChild(lineCrossAxisExtent, *child) - startOffset); |
| break; |
| } |
| case ItemPositionLastBaseline: |
| case ItemPositionSelfStart: |
| case ItemPositionSelfEnd: |
| case ItemPositionStart: |
| case ItemPositionEnd: |
| case ItemPositionLeft: |
| case ItemPositionRight: |
| // FIXME: File a bug about implementing that. The extended grammar |
| // is not enabled by default so we shouldn't hit this codepath. |
| ASSERT_NOT_REACHED(); |
| break; |
| } |
| } |
| minMarginAfterBaselines.append(minMarginAfterBaseline); |
| } |
| |
| if (style()->flexWrap() != FlexWrapReverse) |
| return; |
| |
| // wrap-reverse flips the cross axis start and end. For baseline alignment, this means we |
| // need to align the after edge of baseline elements with the after edge of the flex line. |
| child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| LayoutUnit minMarginAfterBaseline = minMarginAfterBaselines[lineNumber]; |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| if (alignmentForChild(*child) == ItemPositionBaseline && !hasAutoMarginsInCrossAxis(*child) && minMarginAfterBaseline) |
| adjustAlignmentForChild(*child, minMarginAfterBaseline); |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::applyStretchAlignmentToChild(RenderBox& child, LayoutUnit lineCrossAxisExtent) |
| { |
| if (!isColumnFlow() && child.style()->logicalHeight().isAuto()) { |
| // FIXME: If the child has orthogonal flow, then it already has an override height set, so use it. |
| if (!hasOrthogonalFlow(child)) { |
| LayoutUnit heightBeforeStretching = needToStretchChildLogicalHeight(child) ? constrainedChildIntrinsicContentLogicalHeight(child) : child.logicalHeight(); |
| LayoutUnit stretchedLogicalHeight = heightBeforeStretching + availableAlignmentSpaceForChildBeforeStretching(lineCrossAxisExtent, child); |
| ASSERT(!child.needsLayout()); |
| LayoutUnit desiredLogicalHeight = child.constrainLogicalHeightByMinMax(stretchedLogicalHeight, heightBeforeStretching - child.borderAndPaddingLogicalHeight()); |
| |
| // FIXME: Can avoid laying out here in some cases. See https://webkit.org/b/87905. |
| bool childNeedsRelayout = desiredLogicalHeight != child.logicalHeight(); |
| if (childNeedsRelayout || !child.hasOverrideHeight()) |
| child.setOverrideLogicalContentHeight(desiredLogicalHeight - child.borderAndPaddingLogicalHeight()); |
| if (childNeedsRelayout) { |
| child.setLogicalHeight(0); |
| child.forceChildLayout(); |
| } |
| } |
| } else if (isColumnFlow() && child.style()->logicalWidth().isAuto()) { |
| // FIXME: If the child doesn't have orthogonal flow, then it already has an override width set, so use it. |
| if (hasOrthogonalFlow(child)) { |
| LayoutUnit childWidth = std::max<LayoutUnit>(0, lineCrossAxisExtent - crossAxisMarginExtentForChild(child)); |
| childWidth = child.constrainLogicalWidthByMinMax(childWidth, childWidth, this); |
| |
| if (childWidth != child.logicalWidth()) { |
| child.setOverrideLogicalContentWidth(childWidth - child.borderAndPaddingLogicalWidth()); |
| child.forceChildLayout(); |
| } |
| } |
| } |
| } |
| |
| void RenderFlexibleBox::flipForRightToLeftColumn() |
| { |
| if (style()->isLeftToRightDirection() || !isColumnFlow()) |
| return; |
| |
| LayoutUnit crossExtent = crossAxisExtent(); |
| for (RenderBox* child = m_orderIterator.first(); child; child = m_orderIterator.next()) { |
| if (child->isOutOfFlowPositioned()) |
| continue; |
| LayoutPoint location = flowAwareLocationForChild(*child); |
| // For vertical flows, setFlowAwareLocationForChild will transpose x and y, |
| // so using the y axis for a column cross axis extent is correct. |
| location.setY(crossExtent - crossAxisExtentForChild(*child) - location.y()); |
| setFlowAwareLocationForChild(*child, location); |
| } |
| } |
| |
| void RenderFlexibleBox::flipForWrapReverse(const Vector<LineContext>& lineContexts, LayoutUnit crossAxisStartEdge) |
| { |
| LayoutUnit contentExtent = crossAxisContentExtent(); |
| RenderBox* child = m_orderIterator.first(); |
| for (size_t lineNumber = 0; lineNumber < lineContexts.size(); ++lineNumber) { |
| for (size_t childNumber = 0; childNumber < lineContexts[lineNumber].numberOfChildren; ++childNumber, child = m_orderIterator.next()) { |
| ASSERT(child); |
| LayoutUnit lineCrossAxisExtent = lineContexts[lineNumber].crossAxisExtent; |
| LayoutUnit originalOffset = lineContexts[lineNumber].crossAxisOffset - crossAxisStartEdge; |
| LayoutUnit newOffset = contentExtent - originalOffset - lineCrossAxisExtent; |
| adjustAlignmentForChild(*child, newOffset - originalOffset); |
| } |
| } |
| } |
| |
| } |
