chroot/build/arm-generic/usr/lib/python3.6/site-packages/servo/data/cherry_rev1.xml

<?xml version="1.0"?>
<root>
<!-- Autogenerated on Sat Jun 25 15:05:01 2022 -->
  <include>
    <name>ina2xx.xml</name>
  </include>
  <control>
    <name>ppvar_vbus_in_mv</name>
    <doc>Bus Voltage of 'ppvar_vbus_in' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="20.0" tags="bus_voltage_rail" base_name="ppvar_vbus_in" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_mw</name>
    <doc>Power of 'ppvar_vbus_in' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="20.0" tags="power_rail" base_name="ppvar_vbus_in" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_ma</name>
    <doc>Current of 'ppvar_vbus_in' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="20.0" tags="current_rail" base_name="ppvar_vbus_in" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_vbus_in' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="20.0" tags="shunt_voltage_rail" base_name="ppvar_vbus_in" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_ez_config</name>
    <doc>Good default config for 'ppvar_vbus_in' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="20.0" tags="adc_ez_config_ctrls" base_name="ppvar_vbus_in" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_vbus_in_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="64" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_mv</name>
    <doc>Bus Voltage of 'ppvar_batt' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="7.7" tags="bus_voltage_rail" base_name="ppvar_batt" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_mw</name>
    <doc>Power of 'ppvar_batt' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="7.7" tags="power_rail" base_name="ppvar_batt" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_ma</name>
    <doc>Current of 'ppvar_batt' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="7.7" tags="current_rail" base_name="ppvar_batt" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_batt' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="7.7" tags="shunt_voltage_rail" base_name="ppvar_batt" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_ez_config</name>
    <doc>Good default config for 'ppvar_batt' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="7.7" tags="adc_ez_config_ctrls" base_name="ppvar_batt" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="65" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_mv</name>
    <doc>Bus Voltage of 'pp4200_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="4.2" tags="bus_voltage_rail" base_name="pp4200_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_z2_mw</name>
    <doc>Power of 'pp4200_z2' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="4.2" tags="power_rail" base_name="pp4200_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_z2_ma</name>
    <doc>Current of 'pp4200_z2' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="4.2" tags="current_rail" base_name="pp4200_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_z2_shuntmv</name>
    <doc>Shunt Voltage of 'pp4200_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="4.2" tags="shunt_voltage_rail" base_name="pp4200_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_z2_ez_config</name>
    <doc>Good default config for 'pp4200_z2' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="4.2" tags="adc_ez_config_ctrls" base_name="pp4200_z2" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_z2_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_z2_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="66" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_mv</name>
    <doc>Bus Voltage of 'ppvar_bl' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="7.7" tags="bus_voltage_rail" base_name="ppvar_bl" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_bl_mw</name>
    <doc>Power of 'ppvar_bl' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="7.7" tags="power_rail" base_name="ppvar_bl" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_bl_ma</name>
    <doc>Current of 'ppvar_bl' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="7.7" tags="current_rail" base_name="ppvar_bl" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_bl_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_bl' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="7.7" tags="shunt_voltage_rail" base_name="ppvar_bl" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_bl_ez_config</name>
    <doc>Good default config for 'ppvar_bl' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="7.7" tags="adc_ez_config_ctrls" base_name="ppvar_bl" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_bl_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_bl_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="67" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_mv</name>
    <doc>Bus Voltage of 'pp3300_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="3.3" tags="bus_voltage_rail" base_name="pp3300_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_z2_mw</name>
    <doc>Power of 'pp3300_z2' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="3.3" tags="power_rail" base_name="pp3300_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_z2_ma</name>
    <doc>Current of 'pp3300_z2' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="3.3" tags="current_rail" base_name="pp3300_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_z2_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="3.3" tags="shunt_voltage_rail" base_name="pp3300_z2" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_z2_ez_config</name>
    <doc>Good default config for 'pp3300_z2' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="3.3" tags="adc_ez_config_ctrls" base_name="pp3300_z2" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_z2_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_z2_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="68" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_mv</name>
    <doc>Bus Voltage of 'pp5000_s5' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="5.0" tags="bus_voltage_rail" base_name="pp5000_s5" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_s5_mw</name>
    <doc>Power of 'pp5000_s5' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="5.0" tags="power_rail" base_name="pp5000_s5" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_s5_ma</name>
    <doc>Current of 'pp5000_s5' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="5.0" tags="current_rail" base_name="pp5000_s5" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_s5_shuntmv</name>
    <doc>Shunt Voltage of 'pp5000_s5' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="5.0" tags="shunt_voltage_rail" base_name="pp5000_s5" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_s5_ez_config</name>
    <doc>Good default config for 'pp5000_s5' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="5.0" tags="adc_ez_config_ctrls" base_name="pp5000_s5" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_s5_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_s5_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="69" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_mv</name>
    <doc>Bus Voltage of 'pp4200_gpu_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="4.2" tags="bus_voltage_rail" base_name="pp4200_gpu_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_mw</name>
    <doc>Power of 'pp4200_gpu_vin' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="4.2" tags="power_rail" base_name="pp4200_gpu_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_ma</name>
    <doc>Current of 'pp4200_gpu_vin' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="4.2" tags="current_rail" base_name="pp4200_gpu_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_shuntmv</name>
    <doc>Shunt Voltage of 'pp4200_gpu_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="4.2" tags="shunt_voltage_rail" base_name="pp4200_gpu_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_ez_config</name>
    <doc>Good default config for 'pp4200_gpu_vin' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="4.2" tags="adc_ez_config_ctrls" base_name="pp4200_gpu_vin" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_gpu_vin_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="70" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_mv</name>
    <doc>Bus Voltage of 'ppvar_sys' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="7.7" tags="bus_voltage_rail" base_name="ppvar_sys" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_mw</name>
    <doc>Power of 'ppvar_sys' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="7.7" tags="power_rail" base_name="ppvar_sys" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_ma</name>
    <doc>Current of 'ppvar_sys' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="7.7" tags="current_rail" base_name="ppvar_sys" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_sys' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="7.7" tags="shunt_voltage_rail" base_name="ppvar_sys" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_ez_config</name>
    <doc>Good default config for 'ppvar_sys' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="7.7" tags="adc_ez_config_ctrls" base_name="ppvar_sys" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="71" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_mv</name>
    <doc>Bus Voltage of 'pp1800_vio18_s3' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="1.8" tags="bus_voltage_rail" base_name="pp1800_vio18_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_mw</name>
    <doc>Power of 'pp1800_vio18_s3' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="1.8" tags="power_rail" base_name="pp1800_vio18_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_ma</name>
    <doc>Current of 'pp1800_vio18_s3' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="1.8" tags="current_rail" base_name="pp1800_vio18_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_shuntmv</name>
    <doc>Shunt Voltage of 'pp1800_vio18_s3' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="1.8" tags="shunt_voltage_rail" base_name="pp1800_vio18_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_ez_config</name>
    <doc>Good default config for 'pp1800_vio18_s3' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="1.8" tags="adc_ez_config_ctrls" base_name="pp1800_vio18_s3" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_vio18_s3_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="72" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_mv</name>
    <doc>Bus Voltage of 'pp4200_core_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="4.2" tags="bus_voltage_rail" base_name="pp4200_core_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_mw</name>
    <doc>Power of 'pp4200_core_vin' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="4.2" tags="power_rail" base_name="pp4200_core_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_ma</name>
    <doc>Current of 'pp4200_core_vin' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="4.2" tags="current_rail" base_name="pp4200_core_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_shuntmv</name>
    <doc>Shunt Voltage of 'pp4200_core_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="4.2" tags="shunt_voltage_rail" base_name="pp4200_core_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_ez_config</name>
    <doc>Good default config for 'pp4200_core_vin' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="4.2" tags="adc_ez_config_ctrls" base_name="pp4200_core_vin" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_core_vin_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="73" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_mv</name>
    <doc>Bus Voltage of 'pp4200_bc_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="4.2" tags="bus_voltage_rail" base_name="pp4200_bc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_mw</name>
    <doc>Power of 'pp4200_bc_vin' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="4.2" tags="power_rail" base_name="pp4200_bc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_ma</name>
    <doc>Current of 'pp4200_bc_vin' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="4.2" tags="current_rail" base_name="pp4200_bc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_shuntmv</name>
    <doc>Shunt Voltage of 'pp4200_bc_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="4.2" tags="shunt_voltage_rail" base_name="pp4200_bc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_ez_config</name>
    <doc>Good default config for 'pp4200_bc_vin' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="4.2" tags="adc_ez_config_ctrls" base_name="pp4200_bc_vin" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_bc_vin_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="74" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_mv</name>
    <doc>Bus Voltage of 'pp4200_lc_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="4.2" tags="bus_voltage_rail" base_name="pp4200_lc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_mw</name>
    <doc>Power of 'pp4200_lc_vin' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="4.2" tags="power_rail" base_name="pp4200_lc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_ma</name>
    <doc>Current of 'pp4200_lc_vin' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="4.2" tags="current_rail" base_name="pp4200_lc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_shuntmv</name>
    <doc>Shunt Voltage of 'pp4200_lc_vin' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="4.2" tags="shunt_voltage_rail" base_name="pp4200_lc_vin" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_ez_config</name>
    <doc>Good default config for 'pp4200_lc_vin' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="4.2" tags="adc_ez_config_ctrls" base_name="pp4200_lc_vin" map="on" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp4200_lc_vin_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="75" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_mv</name>
    <doc>Bus Voltage of 'pp3300_wlan_x' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="3.3" tags="bus_voltage_rail" base_name="pp3300_wlan_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_mw</name>
    <doc>Power of 'pp3300_wlan_x' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="3.3" tags="power_rail" base_name="pp3300_wlan_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_ma</name>
    <doc>Current of 'pp3300_wlan_x' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="3.3" tags="current_rail" base_name="pp3300_wlan_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_wlan_x' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="3.3" tags="shunt_voltage_rail" base_name="pp3300_wlan_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_ez_config</name>
    <doc>Good default config for 'pp3300_wlan_x' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="3.3" tags="adc_ez_config_ctrls" base_name="pp3300_wlan_x" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_wlan_x_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="76" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_mv</name>
    <doc>Bus Voltage of 'pp3300_s3' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="3.3" tags="bus_voltage_rail" base_name="pp3300_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_s3_mw</name>
    <doc>Power of 'pp3300_s3' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="3.3" tags="power_rail" base_name="pp3300_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_s3_ma</name>
    <doc>Current of 'pp3300_s3' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="3.3" tags="current_rail" base_name="pp3300_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_s3_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_s3' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="3.3" tags="shunt_voltage_rail" base_name="pp3300_s3" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_s3_ez_config</name>
    <doc>Good default config for 'pp3300_s3' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="3.3" tags="adc_ez_config_ctrls" base_name="pp3300_s3" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_s3_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_s3_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="77" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_mv</name>
    <doc>Bus Voltage of 'pp3300_ec_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="3.3" tags="bus_voltage_rail" base_name="pp3300_ec_z2" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_mw</name>
    <doc>Power of 'pp3300_ec_z2' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="3.3" tags="power_rail" base_name="pp3300_ec_z2" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_ma</name>
    <doc>Current of 'pp3300_ec_z2' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="3.3" tags="current_rail" base_name="pp3300_ec_z2" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_ec_z2' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="3.3" tags="shunt_voltage_rail" base_name="pp3300_ec_z2" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_ez_config</name>
    <doc>Good default config for 'pp3300_ec_z2' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="3.3" tags="adc_ez_config_ctrls" base_name="pp3300_ec_z2" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_ec_z2_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="78" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_mv</name>
    <doc>Bus Voltage of 'pp3300_lcm_x' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="millivolts" nom="3.3" tags="bus_voltage_rail" base_name="pp3300_lcm_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_mw</name>
    <doc>Power of 'pp3300_lcm_x' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliwatts" nom="3.3" tags="power_rail" base_name="pp3300_lcm_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_ma</name>
    <doc>Current of 'pp3300_lcm_x' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="milliamps" nom="3.3" tags="current_rail" base_name="pp3300_lcm_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_lcm_x' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina231" channel="0" subtype="shuntmv" nom="3.3" tags="shunt_voltage_rail" base_name="pp3300_lcm_x" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_ez_config</name>
    <doc>Good default config for 'pp3300_lcm_x' rail</doc>
    <params cmd="set" interface="servo" drv="ina231" channel="0" subtype="ez_config" nom="3.3" tags="adc_ez_config_ctrls" base_name="pp3300_lcm_x" map="on" rsense="0.02">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="0" reg_len="2" map="ina231_cfg" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="1" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="2" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="3" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="4" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="5" reg_len="2" map="calibrate" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="6" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_lcm_x_alrt_reg</name>
    <doc>Raw register value of alrt on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" offset="7" reg_len="2" addr="79" c2d2_interface="4">
    </params>
  </control>
</root>