chroot/build/arm-generic/usr/lib/python3.6/site-packages/servo/data/rammus_rev0_inas.xml

<?xml version="1.0"?>
<root>
<!-- Autogenerated on Fri Jun 24 11:26:34 2022 -->
  <include>
    <name>ina2xx.xml</name>
  </include>
  <control>
    <name>pp3300_dsw_ec_mv</name>
    <doc>Bus Voltage of 'pp3300_dsw_ec' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="millivolts" base_name="pp3300_dsw_ec" nom="3.3" tags="bus_voltage_rail" rsense="0.0">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_mw</name>
    <doc>Power of 'pp3300_dsw_ec' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliwatts" base_name="pp3300_dsw_ec" nom="3.3" tags="power_rail" rsense="0.0">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_ma</name>
    <doc>Current of 'pp3300_dsw_ec' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliamps" base_name="pp3300_dsw_ec" nom="3.3" tags="current_rail" rsense="0.0">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_dsw_ec' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="shuntmv" base_name="pp3300_dsw_ec" nom="3.3" tags="shunt_voltage_rail" rsense="0.0">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_ez_config</name>
    <doc>Good default config for 'pp3300_dsw_ec' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="0" subtype="ez_config" base_name="pp3300_dsw_ec" nom="3.3" rsense="0.0" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="64" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ec_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_mv</name>
    <doc>Bus Voltage of 'pp3300_dx_wlan' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="millivolts" base_name="pp3300_dx_wlan" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_mw</name>
    <doc>Power of 'pp3300_dx_wlan' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliwatts" base_name="pp3300_dx_wlan" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_ma</name>
    <doc>Current of 'pp3300_dx_wlan' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliamps" base_name="pp3300_dx_wlan" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_dx_wlan' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="shuntmv" base_name="pp3300_dx_wlan" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_ez_config</name>
    <doc>Good default config for 'pp3300_dx_wlan' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="1" subtype="ez_config" base_name="pp3300_dx_wlan" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="64" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_wlan_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_mv</name>
    <doc>Bus Voltage of 'pp3300_dx_edp' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="millivolts" base_name="pp3300_dx_edp" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_mw</name>
    <doc>Power of 'pp3300_dx_edp' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliwatts" base_name="pp3300_dx_edp" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_ma</name>
    <doc>Current of 'pp3300_dx_edp' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliamps" base_name="pp3300_dx_edp" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_dx_edp' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="shuntmv" base_name="pp3300_dx_edp" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_ez_config</name>
    <doc>Good default config for 'pp3300_dx_edp' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="2" subtype="ez_config" base_name="pp3300_dx_edp" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="64" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="6" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_edp_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_mv</name>
    <doc>Bus Voltage of 'pp3300_dsw' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="millivolts" base_name="pp3300_dsw" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_mw</name>
    <doc>Power of 'pp3300_dsw' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliwatts" base_name="pp3300_dsw" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ma</name>
    <doc>Current of 'pp3300_dsw' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliamps" base_name="pp3300_dsw" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_dsw' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="shuntmv" base_name="pp3300_dsw" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_ez_config</name>
    <doc>Good default config for 'pp3300_dsw' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="0" subtype="ez_config" base_name="pp3300_dsw" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="65" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dsw_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_a_mv</name>
    <doc>Bus Voltage of 'pp5000_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="millivolts" base_name="pp5000_a" nom="5.0" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_a_mw</name>
    <doc>Power of 'pp5000_a' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliwatts" base_name="pp5000_a" nom="5.0" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_a_ma</name>
    <doc>Current of 'pp5000_a' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliamps" base_name="pp5000_a" nom="5.0" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_a_shuntmv</name>
    <doc>Shunt Voltage of 'pp5000_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="shuntmv" base_name="pp5000_a" nom="5.0" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp5000_a_ez_config</name>
    <doc>Good default config for 'pp5000_a' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="1" subtype="ez_config" base_name="pp5000_a" nom="5.0" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp5000_a_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="65" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_a_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_a_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp5000_a_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_a_mv</name>
    <doc>Bus Voltage of 'pp3300_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="millivolts" base_name="pp3300_a" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_a_mw</name>
    <doc>Power of 'pp3300_a' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliwatts" base_name="pp3300_a" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_a_ma</name>
    <doc>Current of 'pp3300_a' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliamps" base_name="pp3300_a" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_a_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="shuntmv" base_name="pp3300_a" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_a_ez_config</name>
    <doc>Good default config for 'pp3300_a' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="2" subtype="ez_config" base_name="pp3300_a" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_a_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="65" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_a_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_a_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="6" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_a_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_a_mv</name>
    <doc>Bus Voltage of 'pp1800_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="millivolts" base_name="pp1800_a" nom="1.8" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_a_mw</name>
    <doc>Power of 'pp1800_a' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliwatts" base_name="pp1800_a" nom="1.8" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_a_ma</name>
    <doc>Current of 'pp1800_a' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliamps" base_name="pp1800_a" nom="1.8" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_a_shuntmv</name>
    <doc>Shunt Voltage of 'pp1800_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="shuntmv" base_name="pp1800_a" nom="1.8" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_a_ez_config</name>
    <doc>Good default config for 'pp1800_a' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="0" subtype="ez_config" base_name="pp1800_a" nom="1.8" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp1800_a_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="66" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_a_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_a_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_a_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_mv</name>
    <doc>Bus Voltage of 'pp1800_u_dram' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="millivolts" base_name="pp1800_u_dram" nom="1.8" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_mw</name>
    <doc>Power of 'pp1800_u_dram' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliwatts" base_name="pp1800_u_dram" nom="1.8" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_ma</name>
    <doc>Current of 'pp1800_u_dram' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliamps" base_name="pp1800_u_dram" nom="1.8" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_shuntmv</name>
    <doc>Shunt Voltage of 'pp1800_u_dram' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="shuntmv" base_name="pp1800_u_dram" nom="1.8" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_ez_config</name>
    <doc>Good default config for 'pp1800_u_dram' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="1" subtype="ez_config" base_name="pp1800_u_dram" nom="1.8" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="66" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1800_u_dram_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_mv</name>
    <doc>Bus Voltage of 'pp1200_vddq' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="millivolts" base_name="pp1200_vddq" nom="1.2" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_mw</name>
    <doc>Power of 'pp1200_vddq' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliwatts" base_name="pp1200_vddq" nom="1.2" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_ma</name>
    <doc>Current of 'pp1200_vddq' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliamps" base_name="pp1200_vddq" nom="1.2" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_shuntmv</name>
    <doc>Shunt Voltage of 'pp1200_vddq' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="shuntmv" base_name="pp1200_vddq" nom="1.2" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_ez_config</name>
    <doc>Good default config for 'pp1200_vddq' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="2" subtype="ez_config" base_name="pp1200_vddq" nom="1.2" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="66" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="6" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1200_vddq_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1000_a_mv</name>
    <doc>Bus Voltage of 'pp1000_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="millivolts" base_name="pp1000_a" nom="1.0" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1000_a_mw</name>
    <doc>Power of 'pp1000_a' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliwatts" base_name="pp1000_a" nom="1.0" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1000_a_ma</name>
    <doc>Current of 'pp1000_a' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="milliamps" base_name="pp1000_a" nom="1.0" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1000_a_shuntmv</name>
    <doc>Shunt Voltage of 'pp1000_a' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="0" subtype="shuntmv" base_name="pp1000_a" nom="1.0" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp1000_a_ez_config</name>
    <doc>Good default config for 'pp1000_a' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="0" subtype="ez_config" base_name="pp1000_a" nom="1.0" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp1000_a_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="67" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1000_a_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1000_a_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp1000_a_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp975_io_mv</name>
    <doc>Bus Voltage of 'pp975_io' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="millivolts" base_name="pp975_io" nom="0.975" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp975_io_mw</name>
    <doc>Power of 'pp975_io' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliwatts" base_name="pp975_io" nom="0.975" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp975_io_ma</name>
    <doc>Current of 'pp975_io' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="milliamps" base_name="pp975_io" nom="0.975" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp975_io_shuntmv</name>
    <doc>Shunt Voltage of 'pp975_io' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="1" subtype="shuntmv" base_name="pp975_io" nom="0.975" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp975_io_ez_config</name>
    <doc>Good default config for 'pp975_io' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="1" subtype="ez_config" base_name="pp975_io" nom="0.975" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp975_io_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="67" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp975_io_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp975_io_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp975_io_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_mv</name>
    <doc>Bus Voltage of 'pp850_prim_core' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="millivolts" base_name="pp850_prim_core" nom="0.85" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_mw</name>
    <doc>Power of 'pp850_prim_core' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliwatts" base_name="pp850_prim_core" nom="0.85" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_ma</name>
    <doc>Current of 'pp850_prim_core' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="milliamps" base_name="pp850_prim_core" nom="0.85" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_shuntmv</name>
    <doc>Shunt Voltage of 'pp850_prim_core' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina3221" channel="2" subtype="shuntmv" base_name="pp850_prim_core" nom="0.85" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_ez_config</name>
    <doc>Good default config for 'pp850_prim_core' rail</doc>
    <params cmd="set" interface="servo" drv="ina3221" channel="2" subtype="ez_config" base_name="pp850_prim_core" nom="0.85" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina3221_cfg" addr="67" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="6" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp850_prim_core_msken_reg</name>
    <doc>Raw register value of msken on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="15" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_mv</name>
    <doc>Bus Voltage of 'pp3300_h1' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_h1" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_h1_mw</name>
    <doc>Power of 'pp3300_h1' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_h1" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_h1_ma</name>
    <doc>Current of 'pp3300_h1' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_h1" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_h1_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_h1' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_h1" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_h1_ez_config</name>
    <doc>Good default config for 'pp3300_h1' rail</doc>
    <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_h1" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_h1_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="68" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_h1_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="68" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_mv</name>
    <doc>Bus Voltage of 'ppvar_sys_bl' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="ppvar_sys_bl" nom="8.0" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_mw</name>
    <doc>Power of 'ppvar_sys_bl' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="ppvar_sys_bl" nom="8.0" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_ma</name>
    <doc>Current of 'ppvar_sys_bl' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="ppvar_sys_bl" nom="8.0" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_sys_bl' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="ppvar_sys_bl" nom="8.0" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_ez_config</name>
    <doc>Good default config for 'ppvar_sys_bl' rail</doc>
    <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="ppvar_sys_bl" nom="8.0" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="69" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_sys_bl_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="69" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_mv</name>
    <doc>Bus Voltage of 'pp3300_dx_touch' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_dx_touch" nom="3.3" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_mw</name>
    <doc>Power of 'pp3300_dx_touch' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_dx_touch" nom="3.3" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_ma</name>
    <doc>Current of 'pp3300_dx_touch' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_dx_touch" nom="3.3" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_shuntmv</name>
    <doc>Shunt Voltage of 'pp3300_dx_touch' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_dx_touch" nom="3.3" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_ez_config</name>
    <doc>Good default config for 'pp3300_dx_touch' rail</doc>
    <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_dx_touch" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="70" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>pp3300_dx_touch_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="70" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_mv</name>
    <doc>Bus Voltage of 'ppvar_pwr_in_bb' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="ppvar_pwr_in_bb" nom="8.0" tags="bus_voltage_rail" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_mw</name>
    <doc>Power of 'ppvar_pwr_in_bb' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="ppvar_pwr_in_bb" nom="8.0" tags="power_rail" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_ma</name>
    <doc>Current of 'ppvar_pwr_in_bb' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="ppvar_pwr_in_bb" nom="8.0" tags="current_rail" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_pwr_in_bb' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="ppvar_pwr_in_bb" nom="8.0" tags="shunt_voltage_rail" rsense="0.02">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_ez_config</name>
    <doc>Good default config for 'ppvar_pwr_in_bb' rail</doc>
    <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="ppvar_pwr_in_bb" nom="8.0" rsense="0.02" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="71" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_pwr_in_bb_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="71" offset="5" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_mv</name>
    <doc>Bus Voltage of 'ppvar_batt_r' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="ppvar_batt_r" nom="8.0" tags="bus_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_mw</name>
    <doc>Power of 'ppvar_batt_r' rail in milliwatts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="ppvar_batt_r" nom="8.0" tags="power_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_ma</name>
    <doc>Current of 'ppvar_batt_r' rail in milliamps</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="ppvar_batt_r" nom="8.0" tags="current_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_shuntmv</name>
    <doc>Shunt Voltage of 'ppvar_batt_r' rail in millivolts</doc>
    <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="ppvar_batt_r" nom="8.0" tags="shunt_voltage_rail" rsense="0.01">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_ez_config</name>
    <doc>Good default config for 'ppvar_batt_r' rail</doc>
    <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="ppvar_batt_r" nom="8.0" rsense="0.01" tags="adc_ez_config_ctrls" map="on">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_cfg_reg</name>
    <doc>Raw register value of cfg on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="72" offset="0" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_shv_reg</name>
    <doc>Raw register value of shv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="1" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_busv_reg</name>
    <doc>Raw register value of busv on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="2" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_pwr_reg</name>
    <doc>Raw register value of pwr on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="3" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_cur_reg</name>
    <doc>Raw register value of cur on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="4" c2d2_interface="4">
    </params>
  </control>
  <control>
    <name>ppvar_batt_r_cal_reg</name>
    <doc>Raw register value of cal on i2c_mux:rem</doc>
    <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="72" offset="5" c2d2_interface="4">
    </params>
  </control>
</root>