| <?xml version="1.0"?> |
| <root> |
| <!-- Autogenerated on Fri Jun 24 11:26:47 2022 --> |
| <include> |
| <name>ina2xx.xml</name> |
| </include> |
| <map> |
| <name>dut_adc_mux</name> |
| <doc>valid mux values for DUT's two banks of INA219 |
| ADCs</doc> |
| <params bank0="1" bank1="2"> |
| </params> |
| </map> |
| <control> |
| <name>dut_adc_mux</name> |
| <doc>4 to 1 mux to steer remote i2c i2c_mux:rem to two sets of |
| 16 INA219 ADCs. Note they are only on leg0 and leg1</doc> |
| <params interface="2" drv="pca9546" child="0x70" |
| map="dut_adc_mux"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_mv</name> |
| <doc>Bus Voltage of 'ppvar_vbat' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="ppvar_vbat" nom="19.6" tags="bus_voltage_rail" rsense="0.03"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_mw</name> |
| <doc>Power of 'ppvar_vbat' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="ppvar_vbat" nom="19.6" tags="power_rail" rsense="0.03"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_ma</name> |
| <doc>Current of 'ppvar_vbat' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="ppvar_vbat" nom="19.6" tags="current_rail" rsense="0.03"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_shuntmv</name> |
| <doc>Shunt Voltage of 'ppvar_vbat' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="ppvar_vbat" nom="19.6" tags="shunt_voltage_rail" rsense="0.03"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_ez_config</name> |
| <doc>Good default config for 'ppvar_vbat' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="ppvar_vbat" nom="19.6" rsense="0.03" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="64" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_vbat_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="64" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_mv</name> |
| <doc>Bus Voltage of 'pp5000' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp5000" nom="5" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_mw</name> |
| <doc>Power of 'pp5000' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp5000" nom="5" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_ma</name> |
| <doc>Current of 'pp5000' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp5000" nom="5" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_shuntmv</name> |
| <doc>Shunt Voltage of 'pp5000' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp5000" nom="5" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_ez_config</name> |
| <doc>Good default config for 'pp5000' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp5000" nom="5" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="65" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="65" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_mv</name> |
| <doc>Bus Voltage of 'pp3300' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300" nom="3.3" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_mw</name> |
| <doc>Power of 'pp3300' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300" nom="3.3" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_ma</name> |
| <doc>Current of 'pp3300' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300" nom="3.3" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300" nom="3.3" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_ez_config</name> |
| <doc>Good default config for 'pp3300' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="66" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="66" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_mv</name> |
| <doc>Bus Voltage of 'nc1' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="nc1" nom="999" tags="bus_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_shuntmv</name> |
| <doc>Shunt Voltage of 'nc1' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="nc1" nom="999" tags="shunt_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_ez_config</name> |
| <doc>Good default config for 'nc1' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="nc1" nom="999" rsense="0" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="67" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc1_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="67" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_mv</name> |
| <doc>Bus Voltage of 'vmem' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="vmem" nom="1.35" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_mw</name> |
| <doc>Power of 'vmem' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="vmem" nom="1.35" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_ma</name> |
| <doc>Current of 'vmem' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="vmem" nom="1.35" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_shuntmv</name> |
| <doc>Shunt Voltage of 'vmem' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="vmem" nom="1.35" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_ez_config</name> |
| <doc>Good default config for 'vmem' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="vmem" nom="1.35" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="68" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vmem_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="68" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_mv</name> |
| <doc>Bus Voltage of 'vddcore' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="vddcore" nom="1" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_mw</name> |
| <doc>Power of 'vddcore' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="vddcore" nom="1" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_ma</name> |
| <doc>Current of 'vddcore' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="vddcore" nom="1" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_shuntmv</name> |
| <doc>Shunt Voltage of 'vddcore' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="vddcore" nom="1" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_ez_config</name> |
| <doc>Good default config for 'vddcore' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="vddcore" nom="1" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="69" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcore_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="69" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_mv</name> |
| <doc>Bus Voltage of 'vddcpu' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="vddcpu" nom="1" tags="bus_voltage_rail" rsense="0.001"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_mw</name> |
| <doc>Power of 'vddcpu' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="vddcpu" nom="1" tags="power_rail" rsense="0.001"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_ma</name> |
| <doc>Current of 'vddcpu' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="vddcpu" nom="1" tags="current_rail" rsense="0.001"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_shuntmv</name> |
| <doc>Shunt Voltage of 'vddcpu' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="vddcpu" nom="1" tags="shunt_voltage_rail" rsense="0.001"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_ez_config</name> |
| <doc>Good default config for 'vddcpu' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="vddcpu" nom="1" rsense="0.001" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="70" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>vddcpu_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="70" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_mv</name> |
| <doc>Bus Voltage of 'pp1500' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1500" nom="1.5" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_mw</name> |
| <doc>Power of 'pp1500' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1500" nom="1.5" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_ma</name> |
| <doc>Current of 'pp1500' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1500" nom="1.5" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1500' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1500" nom="1.5" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_ez_config</name> |
| <doc>Good default config for 'pp1500' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1500" nom="1.5" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="71" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1500_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="71" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_mv</name> |
| <doc>Bus Voltage of 'pp1350_cpu' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1350_cpu" nom="1.35" tags="bus_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1350_cpu' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1350_cpu" nom="1.35" tags="shunt_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_ez_config</name> |
| <doc>Good default config for 'pp1350_cpu' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1350_cpu" nom="1.35" rsense="0" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="72" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_cpu_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="72" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_mv</name> |
| <doc>Bus Voltage of 'pp1350_dram' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1350_dram" nom="1.35" tags="bus_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_mw</name> |
| <doc>Power of 'pp1350_dram' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1350_dram" nom="1.35" tags="power_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_ma</name> |
| <doc>Current of 'pp1350_dram' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1350_dram" nom="1.35" tags="current_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1350_dram' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1350_dram" nom="1.35" tags="shunt_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_ez_config</name> |
| <doc>Good default config for 'pp1350_dram' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1350_dram" nom="1.35" rsense="0.05" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="73" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1350_dram_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="73" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_mv</name> |
| <doc>Bus Voltage of 'ppvar_bl' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="ppvar_bl" nom="14" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_mw</name> |
| <doc>Power of 'ppvar_bl' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="ppvar_bl" nom="14" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_ma</name> |
| <doc>Current of 'ppvar_bl' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="ppvar_bl" nom="14" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_shuntmv</name> |
| <doc>Shunt Voltage of 'ppvar_bl' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="ppvar_bl" nom="14" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_ez_config</name> |
| <doc>Good default config for 'ppvar_bl' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="ppvar_bl" nom="14" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="74" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>ppvar_bl_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="74" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_mv</name> |
| <doc>Bus Voltage of 'pp3300_lcd' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_lcd" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_mw</name> |
| <doc>Power of 'pp3300_lcd' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_lcd" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_ma</name> |
| <doc>Current of 'pp3300_lcd' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_lcd" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_lcd' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_lcd" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_ez_config</name> |
| <doc>Good default config for 'pp3300_lcd' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_lcd" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="75" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lcd_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="75" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_mv</name> |
| <doc>Bus Voltage of 'pp3300_wwan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_wwan" nom="3.3" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_mw</name> |
| <doc>Power of 'pp3300_wwan' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_wwan" nom="3.3" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_ma</name> |
| <doc>Current of 'pp3300_wwan' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_wwan" nom="3.3" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_wwan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_wwan" nom="3.3" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_ez_config</name> |
| <doc>Good default config for 'pp3300_wwan' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_wwan" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="76" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wwan_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="76" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_mv</name> |
| <doc>Bus Voltage of 'pp1800_wlan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1800_wlan" nom="1.8" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_mw</name> |
| <doc>Power of 'pp1800_wlan' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1800_wlan" nom="1.8" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_ma</name> |
| <doc>Current of 'pp1800_wlan' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1800_wlan" nom="1.8" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1800_wlan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1800_wlan" nom="1.8" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_ez_config</name> |
| <doc>Good default config for 'pp1800_wlan' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1800_wlan" nom="1.8" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="77" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_wlan_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="77" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_mv</name> |
| <doc>Bus Voltage of 'pp3300_wlan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_wlan" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_mw</name> |
| <doc>Power of 'pp3300_wlan' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_wlan" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_ma</name> |
| <doc>Current of 'pp3300_wlan' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_wlan" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_wlan' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_wlan" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_ez_config</name> |
| <doc>Good default config for 'pp3300_wlan' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_wlan" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="78" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_wlan_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="78" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_mv</name> |
| <doc>Bus Voltage of 'pp3300_lvds' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_lvds" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_mw</name> |
| <doc>Power of 'pp3300_lvds' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_lvds" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_ma</name> |
| <doc>Current of 'pp3300_lvds' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_lvds" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_lvds' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_lvds" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_ez_config</name> |
| <doc>Good default config for 'pp3300_lvds' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_lvds" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="79" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_lvds_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank0</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="79" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_mv</name> |
| <doc>Bus Voltage of 'pp1800' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1800" nom="1.8" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_mw</name> |
| <doc>Power of 'pp1800' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1800" nom="1.8" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_ma</name> |
| <doc>Current of 'pp1800' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1800" nom="1.8" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1800' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1800" nom="1.8" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_ez_config</name> |
| <doc>Good default config for 'pp1800' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1800" nom="1.8" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="64" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="64" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="64" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_mv</name> |
| <doc>Bus Voltage of 'pp1800_t30' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1800_t30" nom="1.8" tags="bus_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_mw</name> |
| <doc>Power of 'pp1800_t30' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1800_t30" nom="1.8" tags="power_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_ma</name> |
| <doc>Current of 'pp1800_t30' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1800_t30" nom="1.8" tags="current_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1800_t30' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1800_t30" nom="1.8" tags="shunt_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_ez_config</name> |
| <doc>Good default config for 'pp1800_t30' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1800_t30" nom="1.8" rsense="0.05" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="65" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="65" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_t30_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="65" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_mv</name> |
| <doc>Bus Voltage of 'pp3300_t30' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_t30" nom="3.3" tags="bus_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_mw</name> |
| <doc>Power of 'pp3300_t30' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_t30" nom="3.3" tags="power_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_ma</name> |
| <doc>Current of 'pp3300_t30' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_t30" nom="3.3" tags="current_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_t30' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_t30" nom="3.3" tags="shunt_voltage_rail" rsense="0.05"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_ez_config</name> |
| <doc>Good default config for 'pp3300_t30' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_t30" nom="3.3" rsense="0.05" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="66" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="66" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_t30_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="66" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_mv</name> |
| <doc>Bus Voltage of 'pp3300_satacon' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_satacon" nom="3.3" tags="bus_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_mw</name> |
| <doc>Power of 'pp3300_satacon' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_satacon" nom="3.3" tags="power_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_ma</name> |
| <doc>Current of 'pp3300_satacon' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_satacon" nom="3.3" tags="current_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_satacon' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_satacon" nom="3.3" tags="shunt_voltage_rail" rsense="0.01"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_ez_config</name> |
| <doc>Good default config for 'pp3300_satacon' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_satacon" nom="3.3" rsense="0.01" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="67" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="67" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_satacon_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="67" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_mv</name> |
| <doc>Bus Voltage of 'pp3300_emmc' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_emmc" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_mw</name> |
| <doc>Power of 'pp3300_emmc' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_emmc" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_ma</name> |
| <doc>Current of 'pp3300_emmc' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_emmc" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_emmc' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_emmc" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_ez_config</name> |
| <doc>Good default config for 'pp3300_emmc' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_emmc" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="68" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="68" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_emmc_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="68" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_mv</name> |
| <doc>Bus Voltage of 'pp3300_gyro' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_gyro" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_mw</name> |
| <doc>Power of 'pp3300_gyro' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_gyro" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_ma</name> |
| <doc>Current of 'pp3300_gyro' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_gyro" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_gyro' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_gyro" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_ez_config</name> |
| <doc>Good default config for 'pp3300_gyro' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_gyro" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="69" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="69" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_gyro_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="69" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_mv</name> |
| <doc>Bus Voltage of 'pp3300_tpm' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_tpm" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_mw</name> |
| <doc>Power of 'pp3300_tpm' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_tpm" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_ma</name> |
| <doc>Current of 'pp3300_tpm' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_tpm" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_tpm' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_tpm" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_ez_config</name> |
| <doc>Good default config for 'pp3300_tpm' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_tpm" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="70" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="70" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_tpm_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="70" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_mv</name> |
| <doc>Bus Voltage of 'pp1800_codec' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1800_codec" nom="1.8" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_mw</name> |
| <doc>Power of 'pp1800_codec' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1800_codec" nom="1.8" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_ma</name> |
| <doc>Current of 'pp1800_codec' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1800_codec" nom="1.8" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1800_codec' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1800_codec" nom="1.8" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_ez_config</name> |
| <doc>Good default config for 'pp1800_codec' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1800_codec" nom="1.8" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="71" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="71" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1800_codec_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="71" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_mv</name> |
| <doc>Bus Voltage of 'pp5000_audio' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp5000_audio" nom="5" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_mw</name> |
| <doc>Power of 'pp5000_audio' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp5000_audio" nom="5" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_ma</name> |
| <doc>Current of 'pp5000_audio' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp5000_audio" nom="5" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_shuntmv</name> |
| <doc>Shunt Voltage of 'pp5000_audio' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp5000_audio" nom="5" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_ez_config</name> |
| <doc>Good default config for 'pp5000_audio' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp5000_audio" nom="5" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="72" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="72" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_audio_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="72" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_mv</name> |
| <doc>Bus Voltage of 'pp1200_ldo6' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1200_ldo6" nom="1.2" tags="bus_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_mw</name> |
| <doc>Power of 'pp1200_ldo6' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1200_ldo6" nom="1.2" tags="power_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_ma</name> |
| <doc>Current of 'pp1200_ldo6' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1200_ldo6" nom="1.2" tags="current_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1200_ldo6' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1200_ldo6" nom="1.2" tags="shunt_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_ez_config</name> |
| <doc>Good default config for 'pp1200_ldo6' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1200_ldo6" nom="1.2" rsense="0.2" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="73" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="73" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1200_ldo6_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="73" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_mv</name> |
| <doc>Bus Voltage of 'pp1050_ldo1' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1050_ldo1" nom="1.05" tags="bus_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_mw</name> |
| <doc>Power of 'pp1050_ldo1' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1050_ldo1" nom="1.05" tags="power_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_ma</name> |
| <doc>Current of 'pp1050_ldo1' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1050_ldo1" nom="1.05" tags="current_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1050_ldo1' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1050_ldo1" nom="1.05" tags="shunt_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_ez_config</name> |
| <doc>Good default config for 'pp1050_ldo1' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1050_ldo1" nom="1.05" rsense="0.2" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="74" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="74" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1050_ldo1_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="74" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_mv</name> |
| <doc>Bus Voltage of 'pp1100_ldo7' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1100_ldo7" nom="1.1" tags="bus_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_mw</name> |
| <doc>Power of 'pp1100_ldo7' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1100_ldo7" nom="1.1" tags="power_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_ma</name> |
| <doc>Current of 'pp1100_ldo7' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1100_ldo7" nom="1.1" tags="current_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1100_ldo7' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1100_ldo7" nom="1.1" tags="shunt_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_ez_config</name> |
| <doc>Good default config for 'pp1100_ldo7' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1100_ldo7" nom="1.1" rsense="0.2" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="75" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="75" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1100_ldo7_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="75" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_mv</name> |
| <doc>Bus Voltage of 'pp1000_ldo8' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp1000_ldo8" nom="1" tags="bus_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_mw</name> |
| <doc>Power of 'pp1000_ldo8' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp1000_ldo8" nom="1" tags="power_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_ma</name> |
| <doc>Current of 'pp1000_ldo8' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp1000_ldo8" nom="1" tags="current_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_shuntmv</name> |
| <doc>Shunt Voltage of 'pp1000_ldo8' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp1000_ldo8" nom="1" tags="shunt_voltage_rail" rsense="0.2"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_ez_config</name> |
| <doc>Good default config for 'pp1000_ldo8' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp1000_ldo8" nom="1" rsense="0.2" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="76" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="76" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp1000_ldo8_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="76" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_mv</name> |
| <doc>Bus Voltage of 'pp3300_always' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp3300_always" nom="3.3" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_mw</name> |
| <doc>Power of 'pp3300_always' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp3300_always" nom="3.3" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_ma</name> |
| <doc>Current of 'pp3300_always' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp3300_always" nom="3.3" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_shuntmv</name> |
| <doc>Shunt Voltage of 'pp3300_always' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp3300_always" nom="3.3" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_ez_config</name> |
| <doc>Good default config for 'pp3300_always' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp3300_always" nom="3.3" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="77" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="77" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp3300_always_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="77" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_mv</name> |
| <doc>Bus Voltage of 'pp5000_always' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="pp5000_always" nom="5" tags="bus_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_mw</name> |
| <doc>Power of 'pp5000_always' rail in milliwatts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliwatts" base_name="pp5000_always" nom="5" tags="power_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_ma</name> |
| <doc>Current of 'pp5000_always' rail in milliamps</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="milliamps" base_name="pp5000_always" nom="5" tags="current_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_shuntmv</name> |
| <doc>Shunt Voltage of 'pp5000_always' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="pp5000_always" nom="5" tags="shunt_voltage_rail" rsense="0.1"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_ez_config</name> |
| <doc>Good default config for 'pp5000_always' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="pp5000_always" nom="5" rsense="0.1" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="78" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="78" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>pp5000_always_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="78" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_mv</name> |
| <doc>Bus Voltage of 'nc2' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="millivolts" base_name="nc2" nom="999" tags="bus_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_shuntmv</name> |
| <doc>Shunt Voltage of 'nc2' rail in millivolts</doc> |
| <params cmd="get" interface="servo" drv="ina219" channel="0" subtype="shuntmv" base_name="nc2" nom="999" tags="shunt_voltage_rail" rsense="0"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_ez_config</name> |
| <doc>Good default config for 'nc2' rail</doc> |
| <params cmd="set" interface="servo" drv="ina219" channel="0" subtype="ez_config" base_name="nc2" nom="999" rsense="0" tags="adc_ez_config_ctrls" map="on"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_cfg_reg</name> |
| <doc>Raw register value of cfg on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="ina219_cfg" addr="79" offset="0" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_shv_reg</name> |
| <doc>Raw register value of shv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="1" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_busv_reg</name> |
| <doc>Raw register value of busv on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="2" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_pwr_reg</name> |
| <doc>Raw register value of pwr on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="3" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_cur_reg</name> |
| <doc>Raw register value of cur on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" addr="79" offset="4" c2d2_interface="4"> |
| </params> |
| </control> |
| <control> |
| <name>nc2_cal_reg</name> |
| <doc>Raw register value of cal on i2c_mux:rem dut_adc_mux:bank1</doc> |
| <params interface="2" drv="i2c_reg_drv" fmt="hex" reg_len="2" map="calibrate" addr="79" offset="5" c2d2_interface="4"> |
| </params> |
| </control> |
| </root> |
