| # IrDA module configuration |
| # please also look at /etc/conf.d/irda |
| |
| # IrDA over a normal serial port, or a serial port compatible IrDA port |
| alias tty-ldisc-11 irtty |
| |
| # IrCOMM/IrLPT support (virtual serial/parallel over IrDA) |
| alias char-major-161 ircomm-tty # Official allocation of IrCOMM |
| |
| # IrLAN support (Ethernet over IrDA) |
| alias irlan0 irlan |
| # Access type DIRECT=1, PEER=2, HOSTED=3 (int) |
| #options irlan access=2 |
| |
| # IrNET support (Synchronous PPP over IrDA) |
| alias char-major-10-187 irnet # Official allocation of IrNET |
| |
| # Serial Dongles |
| # These values are hard-coded in irattach (not instance order) |
| alias irda-dongle-0 tekram # Tekram IrMate IR-210B |
| alias irda-dongle-1 esi # ESI JetEye |
| alias irda-dongle-2 actisys # Actisys IR-220L |
| alias irda-dongle-3 actisys # Actisys IR-220L+ |
| alias irda-dongle-4 girbil # Greenwich GIrBIL |
| alias irda-dongle-5 litelink # Parallax LiteLink (+ modern ESI) |
| alias irda-dongle-6 airport # Adaptec Airport 1000 and 2000 |
| alias irda-dongle-7 old_belkin # Old Belkin (9600 baud only) |
| alias irda-dongle-8 ep7211 # ??? |
| alias irda-dongle-9 mcp2120 # Crystal compatible chipset |
| |
| # To use the NSC driver on a Thinkpad laptop |
| #alias irda0 nsc-ircc |
| #options nsc-ircc dongle_id=0x09 |
| |
| # To use the NSC driver on a HP OB6000 laptop |
| #alias irda0 nsc-ircc |
| #options nsc-ircc dongle_id=0x08 |
| |
| # SMC driver |
| #alias irda0 smsc-ircc2 |
| #options smsc-ircc2 ircc_dma=1 ircc_irq=10 ircc_fir=0x0130 ircc_sir=0x02f8 |
| |
| # Some laptops (Toshiba Satellites and others with SMCS LPC47N227) require |
| # running smcinit to initialize the irda device prior to use. If your device |
| # is one of them, uncomment the required SMC-IRCC initializer. |
| #install smsc-ircc2 /usr/sbin/smcinit && /sbin/modprobe -i smsc-ircc2 |
| #install smsc-ircc2 /usr/sbin/tosh1800-smcinit && /sbin/modprobe -i smsc-ircc2 |
| #install smsc-ircc2 /usr/sbin/tosh2450-smcinit && /sbin/modprobe -i smsc-ircc2 |