| Index: src/client/main.cpp |
| =================================================================== |
| --- src/client/main.cpp (Revision 76) |
| +++ src/client/main.cpp (Arbeitskopie) |
| @@ -842,7 +842,8 @@ |
| printf("===============================================================================\n"); |
| printf(i18n("Partition Image (http://www.partimage.org/) version %s [%s]\n" |
| "---- distributed under the GPL 2 license (GNU General Public License) ----\n\n" |
| - "Supported file systems:....ext2fs, reiserfs, fat16, fat32, ntfs(exp), hpfs\n\n" |
| + "Supported file systems: Ext2/3, Reiser3, FAT16/32, HPFS, JFS, XFS, \n" |
| + " UFS(beta), HFS(beta), NTFS(experimental)\n\n" |
| "usage: partimage [options] <action> <device> <image_file>\n" |
| " partimage <imginfo/restmbr> <image_file>\n\n" |
| "ex: partimage -z1 -o -d save /dev/hda12 /mnt/backup/redhat-6.2.partimg.gz\n" |
| @@ -858,39 +859,42 @@ |
| " - restmbr: restore a MBR of the image file to an hard disk\n" |
| " - imginfo: show informations about the image file\n" |
| "* <device>: partition to save/restore (example: /dev/hda1)\n" |
| - "* <image_file>: file where data will be read/written. can be very big\n\n" |
| + "* <image_file>: file where data will be read/written. Can be very big.\n" |
| + " For restore, <image_file> can have the value 'stdin'. This allows\n" |
| + " for providing image files through a pipe.\n\n" |
| "Options:\n" |
| - "* -z, --compress (image file compression level):\n" |
| - " -z0, --compress=0 don't compress: very fast but very big image file\n" |
| - " -z1, --compress=1 compress using gzip: fast and small image file (default)\n" |
| - " -z2, --compress=2 (compress using bzip2: very slow and very small image file):\n" |
| - "* -c, --nocheck don't check the partition before saving\n" |
| - "* -o, --overwrite overwrite the existing image file without confirmation\n" |
| - "* -d, --nodesc don't ask any description for the image file\n" |
| - "* -V, --volume (split image into multiple volumes files)\n" |
| - " -VX, --volume=X create volumes with a size of X KB\n" |
| - "* -w, --waitvol wait for a confirmation after each volume change\n" |
| - "* -e, --erase erase empty blocks on restore with zero bytes\n" |
| - "* -m, --allowmnt don't fail if the partition is mounted. Dangerous !\n" |
| - "* -M, --nombr don't create a backup of the MBR (Mast Boot Record) in the image file\n" |
| - "* -h, --help show help\n" |
| - "* -v, --version show version\n" |
| - "* -i, --compilinfo show compilation options used\n" |
| - "* -f, --finish (action to do if finished successfully):\n" |
| - " -f0, --finish=0 wait: don't make anything\n" |
| - " -f1, --finish=1 halt (power off) the computer\n" |
| - " -f2, --finish=2 reboot (restart the computer):\n" |
| - " -f3, --finish=3 quit\n" |
| - "* -b, --batch batch mode: the GUI won't wait for an user action\n" |
| - "* -y, --nosync don't synchronize the disks at the end of the operation (dangerous)\n" |
| - "* -sX, --server=X give partimaged server's ip address\n" |
| - "* -pX, --port=X give partimaged server's listening port\n" |
| - "* -g, --debug=X set the debug level to X (default: 1):\n" |
| - "* -n, --nossl disable SSL in network mode\n" |
| - "* -S, --simulate simulation of restoration mode\n" |
| - "* -aX, --automnt=X Automatic mount with X options. Read the doc for more details\n" |
| - "* -UX --username=X Username to authenticate to server\n" |
| - "* -PX --Password=X Password for authentication of user to server\n"), |
| + "* -z, --compress (image file compression level):\n" |
| + " -z0, --compress=0 don't compress: very fast but very big image file\n" |
| + " -z1, --compress=1 compress using gzip: fast and small image file (default)\n" |
| + " -z2, --compress=2 (compress using bzip2: very slow and very small image file):\n" |
| + "* -c, --nocheck don't check the partition before saving\n" |
| + "* -o, --overwrite overwrite the existing image file without confirmation\n" |
| + "* -d, --nodesc don't ask any description for the image file\n" |
| + "* -V, --volume (split image into multiple volumes files)\n" |
| + " -VX, --volume=X create volumes with a size of X MB\n" |
| + "* -w, --waitvol wait for a confirmation after each volume change\n" |
| + "* -e, --erase erase empty blocks on restore with zero bytes\n" |
| + "* -m, --allowmnt don't fail if the partition is mounted. Dangerous !\n" |
| + "* -M, --nombr don't create a backup of the MBR (Mast Boot Record) in the image file\n" |
| + "* -h, --help show help\n" |
| + "* -v, --version show version\n" |
| + "* -i, --compilinfo show compilation options used\n" |
| + "* -f, --finish (action to do if finished successfully):\n" |
| + " -f0, --finish=0 wait: don't make anything\n" |
| + " -f1, --finish=1 halt (power off) the computer\n" |
| + " -f2, --finish=2 reboot (restart the computer):\n" |
| + " -f3, --finish=3 quit\n" |
| + "* -b, --batch batch mode: the GUI won't wait for an user action\n" |
| + "* -BX, --fully-batch=X batch mode without GUI, X is a challenge response string\n" |
| + "* -y, --nosync don't synchronize the disks at the end of the operation (dangerous)\n" |
| + "* -sX, --server=X give partimaged server's ip address\n" |
| + "* -pX, --port=X give partimaged server's listening port\n" |
| + "* -g, --debug=X set the debug level to X (default: 1):\n" |
| + "* -n, --nossl disable SSL in network mode\n" |
| + "* -S, --simulate simulation of restoration mode\n" |
| + "* -aX, --automnt=X automatic mount with X options. Read the doc for more details\n" |
| + "* -UX --username=X username to authenticate to server\n" |
| + "* -PX --password=X password for authentication of user to server\n"), |
| PACKAGE_VERSION, isVersionStable(PACKAGE_VERSION) ? i18n("stable") : i18n("unstable")); |
| printf("===============================================================================\n"); |
| } |
| Index: README |
| =================================================================== |
| --- README (Revision 73) |
| +++ README (Arbeitskopie) |
| @@ -12,8 +12,17 @@ |
| the Free Software Foundation; either version 2 of the License, or |
| at your option) any later version. |
| |
| -Partition Image is a Linux utility which saves partitions in the ext2fs, reiserfs, fat16, and fat32 |
| -formats an image file. Only used blocks are copied to save the space and to increase the speed. |
| +Partition Image is a partition imaging utility which has support for the following file systems: |
| + * Ext2/3, the linux standard |
| + * Reiser3, a journalised and powerful file system |
| + * FAT16/32, DOS and Windows file systems |
| + * HPFS, IBM OS/2 File System |
| + * JFS, journalised File System, from IBM, used on AIX |
| + * XFS, another journalised and efficient File System, from sgi, used on Irix |
| + * UFS (beta), Unix File System |
| + * HFS (beta), MacOS File System |
| + * NTFS (experimental), Windows NT, 2000 and XP |
| +Only used blocks are copied to save the space and to increase the speed. |
| The image file can be compressed, in gzip, or bzip2 formats, and can be splitted into |
| small files to be copied on floppies (1,44 MB, ZIP, ...). |
| Then, the partition can be restored if there is a problem on the partition (file system error, |
