| # Copyright 1999-2010 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Header: /var/cvsroot/gentoo-x86/app-misc/g15daemon/g15daemon-1.9.5.3-r3.ebuild,v 1.5 2010/03/09 21:53:04 josejx Exp $ |
| |
| EAPI=2 |
| |
| inherit eutils linux-info perl-module python multilib base |
| |
| DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver" |
| HOMEPAGE="http://g15daemon.sourceforge.net/" |
| SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz" |
| |
| LICENSE="GPL-2" |
| SLOT="0" |
| KEYWORDS="amd64 ppc ppc64 x86" |
| IUSE="perl python" |
| |
| DEPEND="=virtual/libusb-0* |
| >=dev-libs/libg15-1.2.4 |
| >=dev-libs/libg15render-1.2 |
| perl? ( >=dev-perl/Inline-0.4 ) |
| python? ( dev-lang/python )" |
| |
| RDEPEND="${DEPEND} |
| perl? ( dev-perl/GDGraph )" |
| |
| PATCHES=( "${FILESDIR}/${P}-forgotten-open-mode.patch" ) |
| uinput_check() { |
| ebegin "Checking for uinput support" |
| local rc=1 |
| linux_config_exists && linux_chkconfig_present INPUT_UINPUT |
| rc=$? |
| |
| if [[ $rc -ne 0 ]] ; then |
| eerror "To use g15daemon, you need to compile your kernel with uinput support." |
| eerror "Please enable uinput support in your kernel config, found at:" |
| eerror |
| eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support." |
| eerror |
| eerror "Once enabled, you should have the /dev/input/uinput device." |
| eerror "g15daemon will not work without the uinput device." |
| fi |
| } |
| |
| pkg_setup() { |
| linux-info_pkg_setup |
| uinput_check |
| } |
| |
| src_unpack() { |
| unpack ${A} |
| if use perl; then |
| unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz" |
| fi |
| if use python; then |
| unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2" |
| fi |
| } |
| |
| src_prepare() { |
| if use perl; then |
| perl-module_src_prepare |
| sed -i \ |
| -e '1i#!/usr/bin/perl' \ |
| "${S}"/contrib/testbindings.pl |
| else |
| # perl-module_src_prepare always calls base_src_prepare |
| base_src_prepare |
| fi |
| use python && [[ -n "${SUPPORT_PYTHON_ABIS}" ]] && python_src_prepare |
| } |
| |
| src_configure() { |
| base_src_configure |
| |
| if use perl; then |
| cd "${WORKDIR}/G15Daemon-0.2" |
| perl-module_src_configure |
| fi |
| } |
| |
| src_compile() { |
| base_src_compile |
| |
| if use perl; then |
| cd "${WORKDIR}/G15Daemon-0.2" |
| perl-module_src_compile |
| fi |
| } |
| |
| src_install() { |
| emake DESTDIR="${D}" \ |
| docdir=/usr/share/doc/${PF} install || die "make install failed" |
| |
| # remove odd docs installed my make |
| rm "${D}/usr/share/doc/${PF}/"{LICENSE,README.usage} |
| |
| insinto /usr/share/${PN}/contrib |
| doins contrib/xmodmaprc |
| doins contrib/xmodmap.sh |
| if use perl; then |
| doins contrib/testbindings.pl |
| fi |
| |
| newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN} |
| newinitd "${FILESDIR}/${PN}-1.2.7-r2.initd" ${PN} |
| dobin "${FILESDIR}/g15daemon-hotplug" |
| insinto /etc/udev/rules.d |
| doins "${FILESDIR}/99-g15daemon.rules" |
| |
| insinto /etc |
| doins "${FILESDIR}"/g15daemon.conf |
| |
| if use perl; then |
| ebegin "Installing Perl Bindings (G15Daemon.pm)" |
| cd "${WORKDIR}/G15Daemon-0.2" |
| docinto perl |
| perl-module_src_install |
| fi |
| |
| if use python; then |
| ebegin "Installing Python Bindings (g15daemon.py)" |
| cd "${WORKDIR}/pyg15daemon" |
| PYVER="$(python_get_version)" |
| |
| insinto /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon |
| doins g15daemon.py |
| |
| docinto python |
| dodoc AUTHORS |
| fi |
| } |
| |
| pkg_postinst() { |
| if use python; then |
| PYVER="$(python_get_version)" |
| python_mod_optimize /usr/$(get_libdir)/python${PYVER}/site-packages/g15daemon |
| echo "" |
| fi |
| |
| elog "To use g15daemon, you need to add g15daemon to the default runlevel." |
| elog "This can be done with:" |
| elog "# /sbin/rc-update add g15daemon default" |
| elog "You can edit some g15daemon options at /etc/conf.d/g15daemon" |
| elog "" |
| elog "To have all new keys working in X11, you'll need create a " |
| elog "specific xmodmap in your home directory or edit the existent one." |
| elog "" |
| elog "Create the xmodmap:" |
| elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap" |
| elog "" |
| elog "Adding keycodes to an existing xmodmap:" |
| elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap" |
| } |
| |
| pkg_postrm() { |
| if use python; then |
| python_mod_cleanup "/usr/$(get_libdir)/python*/site-packages/g15daemon" |
| fi |
| } |