| /* |
| * Copyright (c) 2019-2022, ARM Limited and Contributors. All rights reserved. |
| * Copyright (c) 2019-2022, Intel Corporation. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef PLATFORM_DEF_H |
| #define PLATFORM_DEF_H |
| |
| #include <arch.h> |
| #include <common/interrupt_props.h> |
| #include <common/tbbr/tbbr_img_def.h> |
| #include <plat/common/common_def.h> |
| |
| /* Platform Type */ |
| #define PLAT_SOCFPGA_STRATIX10 1 |
| #define PLAT_SOCFPGA_AGILEX 2 |
| #define PLAT_SOCFPGA_N5X 3 |
| |
| /* sysmgr.boot_scratch_cold4 & 5 used for CPU release address for SPL */ |
| #define PLAT_CPU_RELEASE_ADDR 0xffd12210 |
| |
| /* |
| * sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset |
| * is done and HPS should trigger warm reset via RMR_EL3. |
| */ |
| #define L2_RESET_DONE_REG 0xFFD12218 |
| |
| /* Magic word to indicate L2 reset is completed */ |
| #define L2_RESET_DONE_STATUS 0x1228E5E7 |
| |
| /* Define next boot image name and offset */ |
| #define PLAT_NS_IMAGE_OFFSET 0x10000000 |
| #define PLAT_HANDOFF_OFFSET 0xFFE3F000 |
| |
| /******************************************************************************* |
| * Platform binary types for linking |
| ******************************************************************************/ |
| #define PLATFORM_LINKER_FORMAT "elf64-littleaarch64" |
| #define PLATFORM_LINKER_ARCH aarch64 |
| |
| /* SoCFPGA supports up to 124GB RAM */ |
| #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 39) |
| #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 39) |
| |
| |
| /******************************************************************************* |
| * Generic platform constants |
| ******************************************************************************/ |
| #define PLAT_PRIMARY_CPU 0 |
| #define PLAT_SECONDARY_ENTRY_BASE 0x01f78bf0 |
| |
| /* Size of cacheable stacks */ |
| #define PLATFORM_STACK_SIZE 0x2000 |
| |
| /* PSCI related constant */ |
| #define PLAT_NUM_POWER_DOMAINS 5 |
| #define PLAT_MAX_PWR_LVL 1 |
| #define PLAT_MAX_RET_STATE 1 |
| #define PLAT_MAX_OFF_STATE 2 |
| #define PLATFORM_SYSTEM_COUNT U(1) |
| #define PLATFORM_CLUSTER_COUNT U(1) |
| #define PLATFORM_CLUSTER0_CORE_COUNT U(4) |
| #define PLATFORM_CLUSTER1_CORE_COUNT U(0) |
| #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER1_CORE_COUNT + \ |
| PLATFORM_CLUSTER0_CORE_COUNT) |
| #define PLATFORM_MAX_CPUS_PER_CLUSTER U(4) |
| |
| /* Interrupt related constant */ |
| |
| #define INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER 29 |
| |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_0 8 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_1 9 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_2 10 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_3 11 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_4 12 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_5 13 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_6 14 |
| #define INTEL_SOCFPGA_IRQ_SEC_SGI_7 15 |
| |
| #define TSP_IRQ_SEC_PHY_TIMER INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER |
| #define TSP_SEC_MEM_BASE BL32_BASE |
| #define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE + 1) |
| /******************************************************************************* |
| * Platform memory map related constants |
| ******************************************************************************/ |
| #define DRAM_BASE (0x0) |
| #define DRAM_SIZE (0x80000000) |
| |
| #define OCRAM_BASE (0xFFE00000) |
| #define OCRAM_SIZE (0x00040000) |
| |
| #define MEM64_BASE (0x0100000000) |
| #define MEM64_SIZE (0x1F00000000) |
| |
| #define DEVICE1_BASE (0x80000000) |
| #define DEVICE1_SIZE (0x60000000) |
| |
| #define DEVICE2_BASE (0xF7000000) |
| #define DEVICE2_SIZE (0x08E00000) |
| |
| #define DEVICE3_BASE (0xFFFC0000) |
| #define DEVICE3_SIZE (0x00008000) |
| |
| #define DEVICE4_BASE (0x2000000000) |
| #define DEVICE4_SIZE (0x0100000000) |
| |
| /******************************************************************************* |
| * BL31 specific defines. |
| ******************************************************************************/ |
| /* |
| * Put BL3-1 at the top of the Trusted SRAM (just below the shared memory, if |
| * present). BL31_BASE is calculated using the current BL3-1 debug size plus a |
| * little space for growth. |
| */ |
| |
| |
| #define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n" |
| |
| #define BL1_RO_BASE (0xffe00000) |
| #define BL1_RO_LIMIT (0xffe0f000) |
| #define BL1_RW_BASE (0xffe10000) |
| #define BL1_RW_LIMIT (0xffe1ffff) |
| #define BL1_RW_SIZE (0x14000) |
| |
| #define BL2_BASE (0xffe00000) |
| #define BL2_LIMIT (0xffe1b000) |
| |
| #define BL31_BASE (0x1000) |
| #define BL31_LIMIT (0x81000) |
| |
| #define BL_DATA_LIMIT PLAT_HANDOFF_OFFSET |
| |
| #define PLAT_CPUID_RELEASE (BL_DATA_LIMIT - 16) |
| #define PLAT_SEC_ENTRY (BL_DATA_LIMIT - 8) |
| |
| #define PLAT_SEC_WARM_ENTRY 0 |
| |
| /******************************************************************************* |
| * Platform specific page table and MMU setup constants |
| ******************************************************************************/ |
| #define MAX_XLAT_TABLES 8 |
| #define MAX_MMAP_REGIONS 16 |
| |
| /******************************************************************************* |
| * Declarations and constants to access the mailboxes safely. Each mailbox is |
| * aligned on the biggest cache line size in the platform. This is known only |
| * to the platform as it might have a combination of integrated and external |
| * caches. Such alignment ensures that two maiboxes do not sit on the same cache |
| * line at any cache level. They could belong to different cpus/clusters & |
| * get written while being protected by different locks causing corruption of |
| * a valid mailbox address. |
| ******************************************************************************/ |
| #define CACHE_WRITEBACK_SHIFT 6 |
| #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT) |
| |
| #define PLAT_GIC_BASE (0xFFFC0000) |
| #define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x2000) |
| #define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x1000) |
| #define PLAT_GICR_BASE 0 |
| |
| /******************************************************************************* |
| * UART related constants |
| ******************************************************************************/ |
| #define PLAT_UART0_BASE (0xFFC02000) |
| #define PLAT_UART1_BASE (0xFFC02100) |
| |
| #define CRASH_CONSOLE_BASE PLAT_UART0_BASE |
| |
| #ifndef SIMICS_BUILD |
| #define PLAT_BAUDRATE (115200) |
| #define PLAT_UART_CLOCK (100000000) |
| |
| #else |
| #define PLAT_BAUDRATE (4800) |
| #define PLAT_UART_CLOCK (76800) |
| |
| #endif |
| |
| /******************************************************************************* |
| * PHY related constants |
| ******************************************************************************/ |
| |
| #define EMAC0_PHY_MODE PHY_INTERFACE_MODE_RGMII |
| #define EMAC1_PHY_MODE PHY_INTERFACE_MODE_RGMII |
| #define EMAC2_PHY_MODE PHY_INTERFACE_MODE_RGMII |
| |
| /******************************************************************************* |
| * System counter frequency related constants |
| ******************************************************************************/ |
| #define PLAT_SYS_COUNTER_FREQ_IN_TICKS (400000000) |
| #define PLAT_SYS_COUNTER_FREQ_IN_MHZ (400) |
| |
| #define PLAT_INTEL_SOCFPGA_GICD_BASE PLAT_GICD_BASE |
| #define PLAT_INTEL_SOCFPGA_GICC_BASE PLAT_GICC_BASE |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 |
| * terminology. On a GICv2 system or mode, the lists will be merged and treated |
| * as Group 0 interrupts. |
| */ |
| #define PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_PHY_TIMER, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_0, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_1, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_2, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_3, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_4, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_5, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_6, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(INTEL_SOCFPGA_IRQ_SEC_SGI_7, \ |
| GIC_HIGHEST_SEC_PRIORITY, grp, GIC_INTR_CFG_EDGE) |
| |
| #define PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(grp) |
| |
| #define MAX_IO_HANDLES 4 |
| #define MAX_IO_DEVICES 4 |
| #define MAX_IO_BLOCK_DEVICES 2 |
| |
| #ifndef __ASSEMBLER__ |
| struct socfpga_bl31_params { |
| param_header_t h; |
| image_info_t *bl31_image_info; |
| entry_point_info_t *bl32_ep_info; |
| image_info_t *bl32_image_info; |
| entry_point_info_t *bl33_ep_info; |
| image_info_t *bl33_image_info; |
| }; |
| #endif |
| |
| #endif /* PLATFORM_DEF_H */ |
| |
