blob: 13d1872f84a91af2d195030ab93f2c2b0c5ab1c3 [file] [log] [blame]
/*
* Copyright (c) 2016-2021, Arm Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <asm_macros.S>
.globl flush_dcache_range
.globl clean_dcache_range
.globl inv_dcache_range
.globl dcsw_op_louis
.globl dcsw_op_all
.globl dcsw_op_level1
.globl dcsw_op_level2
.globl dcsw_op_level3
/*
* This macro can be used for implementing various data cache operations `op`
*/
.macro do_dcache_maintenance_by_mva op, coproc, opc1, CRn, CRm, opc2
/* Exit early if size is zero */
cmp r1, #0
beq exit_loop_\op
dcache_line_size r2, r3
add r1, r0, r1
sub r3, r2, #1
bic r0, r0, r3
loop_\op:
stcopr r0, \coproc, \opc1, \CRn, \CRm, \opc2
add r0, r0, r2
cmp r0, r1
blo loop_\op
dsb sy
exit_loop_\op:
bx lr
.endm
/* ------------------------------------------
* Clean+Invalidate from base address till
* size. 'r0' = addr, 'r1' = size
* ------------------------------------------
*/
func flush_dcache_range
do_dcache_maintenance_by_mva cimvac, DCCIMVAC
endfunc flush_dcache_range
/* ------------------------------------------
* Clean from base address till size.
* 'r0' = addr, 'r1' = size
* ------------------------------------------
*/
func clean_dcache_range
do_dcache_maintenance_by_mva cmvac, DCCMVAC
endfunc clean_dcache_range
/* ------------------------------------------
* Invalidate from base address till
* size. 'r0' = addr, 'r1' = size
* ------------------------------------------
*/
func inv_dcache_range
do_dcache_maintenance_by_mva imvac, DCIMVAC
endfunc inv_dcache_range
/* ----------------------------------------------------------------
* Data cache operations by set/way to the level specified
*
* The main function, do_dcsw_op requires:
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* r1: The cache level to begin operation from
* r2: clidr_el1
* r3: The last cache level to operate on
* and will carry out the operation on each data cache from level 0
* to the level in r3 in sequence
*
* The dcsw_op macro sets up the r2 and r3 parameters based on
* clidr_el1 cache information before invoking the main function
* ----------------------------------------------------------------
*/
.macro dcsw_op shift, fw, ls
ldcopr r2, CLIDR
ubfx r3, r2, \shift, \fw
lsl r3, r3, \ls
mov r1, #0
b do_dcsw_op
.endm
func do_dcsw_op
push {r4-r12, lr}
ldcopr r8, ID_MMFR4 // stash FEAT_CCIDX identifier in r8
ubfx r8, r8, #ID_MMFR4_CCIDX_SHIFT, #ID_MMFR4_CCIDX_LENGTH
adr r11, dcsw_loop_table // compute cache op based on the operation type
add r6, r11, r0, lsl #3 // cache op is 2x32-bit instructions
loop1:
add r10, r1, r1, LSR #1 // Work out 3x current cache level
mov r12, r2, LSR r10 // extract cache type bits from clidr
and r12, r12, #7 // mask the bits for current cache only
cmp r12, #2 // see what cache we have at this level
blo level_done // no cache or only instruction cache at this level
stcopr r1, CSSELR // select current cache level in csselr
isb // isb to sych the new cssr&csidr
ldcopr r12, CCSIDR // read the new ccsidr
and r10, r12, #7 // extract the length of the cache lines
add r10, r10, #4 // add 4 (r10 = line length offset)
cmp r8, #0 // check for FEAT_CCIDX for Associativity
beq 1f
ubfx r4, r12, #3, #21 // r4 = associativity CCSIDR[23:3]
b 2f
1:
ubfx r4, r12, #3, #10 // r4 = associativity CCSIDR[12:3]
2:
clz r5, r4 // r5 = the bit position of the way size increment
mov r9, r4 // r9 working copy of the aligned max way number
loop2:
cmp r8, #0 // check for FEAT_CCIDX for NumSets
beq 3f
ldcopr r12, CCSIDR2 // FEAT_CCIDX numsets is in CCSIDR2
ubfx r7, r12, #0, #24 // r7 = numsets CCSIDR2[23:0]
b loop3
3:
ubfx r7, r12, #13, #15 // r7 = numsets CCSIDR[27:13]
loop3:
orr r0, r1, r9, LSL r5 // factor in the way number and cache level into r0
orr r0, r0, r7, LSL r10 // factor in the set number
blx r6
subs r7, r7, #1 // decrement the set number
bhs loop3
subs r9, r9, #1 // decrement the way number
bhs loop2
level_done:
add r1, r1, #2 // increment the cache number
cmp r3, r1
// Ensure completion of previous cache maintenance instruction. Note
// this also mitigates erratum 814220 on Cortex-A7
dsb sy
bhi loop1
mov r6, #0
stcopr r6, CSSELR //select cache level 0 in csselr
dsb sy
isb
pop {r4-r12, pc}
dcsw_loop_table:
stcopr r0, DCISW
bx lr
stcopr r0, DCCISW
bx lr
stcopr r0, DCCSW
bx lr
endfunc do_dcsw_op
/* ---------------------------------------------------------------
* Data cache operations by set/way till PoU.
*
* The function requires :
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_louis
dcsw_op #LOUIS_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
endfunc dcsw_op_louis
/* ---------------------------------------------------------------
* Data cache operations by set/way till PoC.
*
* The function requires :
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_all
dcsw_op #LOC_SHIFT, #CLIDR_FIELD_WIDTH, #LEVEL_SHIFT
endfunc dcsw_op_all
/* ---------------------------------------------------------------
* Helper macro for data cache operations by set/way for the
* level specified
* ---------------------------------------------------------------
*/
.macro dcsw_op_level level
ldcopr r2, CLIDR
mov r3, \level
sub r1, r3, #2
b do_dcsw_op
.endm
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 1 cache
*
* The main function, do_dcsw_op requires:
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level1
dcsw_op_level #(1 << LEVEL_SHIFT)
endfunc dcsw_op_level1
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 2 cache
*
* The main function, do_dcsw_op requires:
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level2
dcsw_op_level #(2 << LEVEL_SHIFT)
endfunc dcsw_op_level2
/* ---------------------------------------------------------------
* Data cache operations by set/way for level 3 cache
*
* The main function, do_dcsw_op requires:
* r0: The operation type (DC_OP_ISW, DC_OP_CISW, DC_OP_CSW),
* as defined in arch.h
* ---------------------------------------------------------------
*/
func dcsw_op_level3
dcsw_op_level #(3 << LEVEL_SHIFT)
endfunc dcsw_op_level3