| /* |
| * Copyright (c) 2013-2021, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <common/bl_common.h> |
| #include <el3_common_macros.S> |
| |
| .globl bl1_entrypoint |
| .globl bl1_run_bl2_in_root |
| |
| |
| /* ----------------------------------------------------- |
| * bl1_entrypoint() is the entry point into the trusted |
| * firmware code when a cpu is released from warm or |
| * cold reset. |
| * ----------------------------------------------------- |
| */ |
| |
| func bl1_entrypoint |
| /* --------------------------------------------------------------------- |
| * If the reset address is programmable then bl1_entrypoint() is |
| * executed only on the cold boot path. Therefore, we can skip the warm |
| * boot mailbox mechanism. |
| * --------------------------------------------------------------------- |
| */ |
| el3_entrypoint_common \ |
| _init_sctlr=1 \ |
| _warm_boot_mailbox=!PROGRAMMABLE_RESET_ADDRESS \ |
| _secondary_cold_boot=!COLD_BOOT_SINGLE_CPU \ |
| _init_memory=1 \ |
| _init_c_runtime=1 \ |
| _exception_vectors=bl1_exceptions \ |
| _pie_fixup_size=0 |
| |
| /* -------------------------------------------------------------------- |
| * Perform BL1 setup |
| * -------------------------------------------------------------------- |
| */ |
| bl bl1_setup |
| |
| #if ENABLE_PAUTH |
| /* -------------------------------------------------------------------- |
| * Program APIAKey_EL1 and enable pointer authentication. |
| * -------------------------------------------------------------------- |
| */ |
| bl pauth_init_enable_el3 |
| #endif /* ENABLE_PAUTH */ |
| |
| /* -------------------------------------------------------------------- |
| * Initialize platform and jump to our c-entry point |
| * for this type of reset. |
| * -------------------------------------------------------------------- |
| */ |
| bl bl1_main |
| |
| #if ENABLE_PAUTH |
| /* -------------------------------------------------------------------- |
| * Disable pointer authentication before jumping to next boot image. |
| * -------------------------------------------------------------------- |
| */ |
| bl pauth_disable_el3 |
| #endif /* ENABLE_PAUTH */ |
| |
| /* -------------------------------------------------- |
| * Do the transition to next boot image. |
| * -------------------------------------------------- |
| */ |
| b el3_exit |
| endfunc bl1_entrypoint |
| |
| /* ----------------------------------------------------- |
| * void bl1_run_bl2_in_root(entry_point_info_t *ep_info); |
| * This function runs BL2 in root/EL3 when RME is enabled. |
| * ----------------------------------------------------- |
| */ |
| |
| #if ENABLE_RME |
| func bl1_run_bl2_in_root |
| mov x20,x0 |
| |
| /* --------------------------------------------- |
| * MMU needs to be disabled because BL2 executes |
| * in EL3. It will initialize the address space |
| * according to its own requirements. |
| * --------------------------------------------- |
| */ |
| bl disable_mmu_icache_el3 |
| tlbi alle3 |
| |
| #if ENABLE_PAUTH |
| /* --------------------------------------------- |
| * Disable pointer authentication before jumping |
| * to next boot image. |
| * --------------------------------------------- |
| */ |
| bl pauth_disable_el3 |
| #endif /* ENABLE_PAUTH */ |
| |
| ldp x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET] |
| msr elr_el3, x0 |
| msr spsr_el3, x1 |
| |
| ldp x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)] |
| ldp x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)] |
| ldp x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)] |
| ldp x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)] |
| exception_return |
| endfunc bl1_run_bl2_in_root |
| #endif /* ENABLE_RME */ |
