src/cpu/samsung/exynos5420/pwm.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 Samsung Electronics
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include <arch/io.h>
#include "clk.h"
#include "cpu.h"
#include "periph.h"
#include "pwm.h"

int pwm_enable(int pwm_id)
{
	const struct s5p_timer *pwm =
			samsung_get_base_timer();
	unsigned long tcon;

	tcon = readl(&pwm->tcon);
	tcon |= TCON_START(pwm_id);

	writel(tcon, &pwm->tcon);

	return 0;
}

int pwm_check_enabled(int pwm_id)
{
	const struct s5p_timer *pwm =
			samsung_get_base_timer();
	const unsigned long tcon = readl(&pwm->tcon);

	return tcon & TCON_START(pwm_id);
}

void pwm_disable(int pwm_id)
{
	const struct s5p_timer *pwm =
			samsung_get_base_timer();
	unsigned long tcon;

	tcon = readl(&pwm->tcon);
	tcon &= ~TCON_START(pwm_id);

	writel(tcon, &pwm->tcon);
}

static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
{
	unsigned long tin_parent_rate;
	unsigned int div;

	tin_parent_rate = clock_get_periph_rate(PERIPH_ID_PWM0);

	for (div = 2; div <= 16; div *= 2) {
		if ((tin_parent_rate / (div << 16)) < freq)
			return tin_parent_rate / div;
	}

	return tin_parent_rate / 16;
}

#define NS_IN_SEC 1000000000UL

int pwm_config(int pwm_id, int duty_ns, int period_ns)
{
	const struct s5p_timer *pwm =
			samsung_get_base_timer();
	unsigned int offset;
	unsigned long tin_rate;
	unsigned long tin_ns;
	unsigned long frequency;
	unsigned long tcon;
	unsigned long tcnt;
	unsigned long tcmp;

	/*
	 * We currently avoid using 64bit arithmetic by using the
	 * fact that anything faster than 1GHz is easily representable
	 * by 32bits.
	 */
	if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0)
		return -1;

	if (duty_ns > period_ns)
		return -1;

	frequency = NS_IN_SEC / period_ns;

	/* Check to see if we are changing the clock rate of the PWM */
	tin_rate = pwm_calc_tin(pwm_id, frequency);

	tin_ns = NS_IN_SEC / tin_rate;
	tcnt = period_ns / tin_ns;

	/* Note, counters count down */
	tcmp = duty_ns / tin_ns;
	tcmp = tcnt - tcmp;

	/* Update the PWM register block. */
	offset = pwm_id * 3;
	if (pwm_id < 4) {
		writel(tcnt, &pwm->tcntb0 + offset);
		writel(tcmp, &pwm->tcmpb0 + offset);
	}

	tcon = readl(&pwm->tcon);
	tcon |= TCON_UPDATE(pwm_id);
	if (pwm_id < 4)
		tcon |= TCON_AUTO_RELOAD(pwm_id);
	else
		tcon |= TCON4_AUTO_RELOAD;
	writel(tcon, &pwm->tcon);

	tcon &= ~TCON_UPDATE(pwm_id);
	writel(tcon, &pwm->tcon);

	return 0;
}

int pwm_init(int pwm_id, int div, int invert)
{
	u32 val;
	const struct s5p_timer *pwm =
			samsung_get_base_timer();
	unsigned long ticks_per_period;
	unsigned int offset, prescaler;

	/*
	 * Timer Freq(HZ) =
	 *	PWM_CLK / { (prescaler_value + 1) * (divider_value) }
	 */

	val = readl(&pwm->tcfg0);
	if (pwm_id < 2) {
		prescaler = PRESCALER_0;
		val &= ~0xff;
		val |= (prescaler & 0xff);
	} else {
		prescaler = PRESCALER_1;
		val &= ~(0xff << 8);
		val |= (prescaler & 0xff) << 8;
	}
	writel(val, &pwm->tcfg0);
	val = readl(&pwm->tcfg1);
	val &= ~(0xf << MUX_DIV_SHIFT(pwm_id));
	val |= (div & 0xf) << MUX_DIV_SHIFT(pwm_id);
	writel(val, &pwm->tcfg1);


	if (pwm_id == 4) {
		/*
		 * TODO(sjg): Use this as a countdown timer for now. We count
		 * down from the maximum value to 0, then reset.
		 */
		ticks_per_period = -1UL;
	} else {
		const unsigned long pwm_hz = 1000;
		unsigned long timer_rate_hz = clock_get_periph_rate(
			PERIPH_ID_PWM0) / ((prescaler + 1) * (1 << div));

		ticks_per_period = timer_rate_hz / pwm_hz;
	}

	/* set count value */
	offset = pwm_id * 3;

	writel(ticks_per_period, &pwm->tcntb0 + offset);

	val = readl(&pwm->tcon) & ~(0xf << TCON_OFFSET(pwm_id));
	if (invert && (pwm_id < 4))
		val |= TCON_INVERTER(pwm_id);
	writel(val, &pwm->tcon);

	pwm_enable(pwm_id);

	return 0;
}