| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2013 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <cpu/cpu.h> |
| #include <cpu/x86/smm.h> |
| #include <string.h> |
| |
| #include <baytrail/iomap.h> |
| #include <baytrail/pmc.h> |
| #include <baytrail/smm.h> |
| |
| /* Save settings which will be committed in SMI functions. */ |
| static uint32_t smm_save_params[SMM_SAVE_PARAM_COUNT]; |
| |
| void southcluster_smm_save_param(int param, uint32_t data) |
| { |
| smm_save_params[param] = data; |
| } |
| |
| void southcluster_smm_clear_state(void) |
| { |
| uint32_t smi_en; |
| |
| /* Log events from chipset before clearing */ |
| southcluster_log_state(); |
| |
| printk(BIOS_DEBUG, "Initializing Southbridge SMI..."); |
| printk(BIOS_SPEW, " pmbase = 0x%04x\n", get_pmbase()); |
| |
| smi_en = inl(get_pmbase() + SMI_EN); |
| if (smi_en & APMC_EN) { |
| printk(BIOS_INFO, "SMI# handler already enabled?\n"); |
| return; |
| } |
| |
| /* Dump and clear status registers */ |
| clear_smi_status(); |
| clear_pm1_status(); |
| clear_tco_status(); |
| clear_gpe_status(); |
| clear_alt_status(); |
| clear_pmc_status(); |
| } |
| |
| static void southcluster_smm_route_gpios(void) |
| { |
| const unsigned long gpio_rout = PMC_BASE_ADDRESS + GPIO_ROUT; |
| const unsigned short alt_gpio_smi = ACPI_BASE_ADDRESS + ALT_GPIO_SMI; |
| uint32_t alt_gpio_reg = 0; |
| uint32_t route_reg = smm_save_params[SMM_SAVE_PARAM_GPIO_ROUTE]; |
| int i; |
| |
| printk(BIOS_DEBUG, "GPIO_ROUT = %08x\n", route_reg); |
| |
| /* Start the routing for the specific gpios. */ |
| write32(gpio_rout, route_reg); |
| |
| /* Enable SMIs for the gpios that are set to trigger the SMI. */ |
| for (i = 0; i < 16; i++) { |
| if ((route_reg & ROUTE_MASK) == ROUTE_SMI) { |
| alt_gpio_reg |= (1 << i); |
| } |
| route_reg >>= 2; |
| } |
| printk(BIOS_DEBUG, "ALT_GPIO_SMI = %08x\n", alt_gpio_reg); |
| |
| outl(alt_gpio_reg, alt_gpio_smi); |
| } |
| |
| void southcluster_smm_enable_smi(void) |
| { |
| uint16_t pm1_events = PWRBTN_EN | GBL_EN; |
| |
| printk(BIOS_DEBUG, "Enabling SMIs.\n"); |
| if (!smm_save_params[SMM_SAVE_PARAM_PCIE_WAKE_ENABLE]) |
| pm1_events |= PCIEXPWAK_DIS; |
| enable_pm1(pm1_events); |
| disable_gpe(PME_B0_EN); |
| |
| /* Set up the GPIO route. */ |
| southcluster_smm_route_gpios(); |
| |
| /* Enable SMI generation: |
| * - on APMC writes (io 0xb2) |
| * - on writes to SLP_EN (sleep states) |
| * - on writes to GBL_RLS (bios commands) |
| * No SMIs: |
| * - on TCO events |
| * - on microcontroller writes (io 0x62/0x66) |
| */ |
| enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS); |
| } |
| |
| void smm_setup_structures(void *gnvs, void *tcg, void *smi1) |
| { |
| /* |
| * Issue SMI to set the gnvs pointer in SMM. |
| * tcg and smi1 are unused. |
| * |
| * EAX = APM_CNT_GNVS_UPDATE |
| * EBX = gnvs pointer |
| * EDX = APM_CNT |
| */ |
| asm volatile ( |
| "outb %%al, %%dx\n\t" |
| : /* ignore result */ |
| : "a" (APM_CNT_GNVS_UPDATE), |
| "b" ((uint32_t)gnvs), |
| "d" (APM_CNT) |
| ); |
| } |