| /* |
| * linux_trampoline |
| * |
| * Copyright (C) 2013 Patrick Georgi <patrick@georgi-clan.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* NOTE: THIS CODE MUST REMAIN POSITION INDEPENDENT |
| * IT SHOULDN'T USE THE STACK |
| * AND IN GENERAL EXPECT NOTHING BUT RAM TO WORK |
| */ |
| .code32 |
| .data |
| |
| #include "linux_trampoline.h" |
| #define HEADER_SIG 0x4f49424c // LBIO little endian |
| #define CB_TAG_FORWARD 0x11 |
| #define CB_TAG_MEMORY 0x1 |
| #define CB_TAG_FRAMEBUFFER 0x12 |
| |
| #define E820_NR_OFFSET 0x1e8 |
| #define LINUX_ENTRY_OFFSET 0x214 |
| #define E820_OFFSET 0x2d0 |
| |
| .trampoline_start: |
| cld |
| xor %edx, %edx |
| mov $0, %ecx |
| |
| .headerSearch: |
| mov $0x10000, %ebx |
| add %ecx, %ebx |
| mov (%ecx), %eax |
| cmp $HEADER_SIG, %eax |
| je .headerSearchDone // found the header |
| add $16, %ecx |
| cmp %ecx, %ebx |
| jne .headerSearch |
| |
| .headerSearchDone: |
| cmp %ecx, %ebx // reached the end == not found anything? |
| je 2f // give up |
| |
| // we assume the checksum is okay, no test |
| mov 4(%ecx), %ebx |
| add %ecx, %ebx // ebx = cb_header + header_bytes |
| mov 20(%ecx), %ecx // ecx = table_entries |
| |
| .tableScan: |
| cmp $CB_TAG_FORWARD, (%ebx) |
| jne .testMemory |
| |
| /* forward tag: assume 32bit pointer */ |
| mov 8(%ebx), %ecx |
| jmp .headerSearch |
| |
| .testMemory: |
| cmp $CB_TAG_MEMORY, (%ebx) |
| jne .testFramebuffer |
| |
| /* memory tag: copy e820 map and entry count. also determine alt_mem_k */ |
| mov 4(%ebx), %eax |
| sub $8, %eax |
| shr $2, %eax /* eax = number of dwords of e820 data */ |
| cmp $(32 * 5), %eax /* linux wants at most 32 entries of 5 dwords */ |
| jng 1f |
| mov $(32 * 5), %eax /* only copy 32 entries */ |
| 1: |
| mov %eax, %esi |
| mov $5, %edi |
| div %edi |
| mov %eax, (LINUX_PARAM_LOC + E820_NR_OFFSET) |
| mov %esi, %eax |
| xchg %eax, %ecx |
| lea 8(%ebx), %esi /* e820 data source */ |
| mov $(LINUX_PARAM_LOC + E820_OFFSET), %edi |
| rep movsl |
| xchg %eax, %ecx |
| jmp .endScan |
| |
| .testFramebuffer: |
| cmp $CB_TAG_FRAMEBUFFER, (%ebx) |
| jne .endScan |
| /* TODO: handle framebuffer tag */ |
| |
| .endScan: |
| add 4(%ebx), %ebx |
| dec %ecx |
| jnz .tableScan |
| |
| /* Setup basic code and data segment selectors for Linux |
| ** |
| ** Flat code segment descriptor: |
| ** selector: 0x10 |
| ** base : 0x00000000 |
| ** limit : 0xFFFFFFFF |
| ** type : code, execute, read |
| ** |
| ** Flat data segment descriptor: |
| ** selector: 0x18 |
| ** base : 0x00000000 |
| ** limit : 0xFFFFFFFF |
| ** type : data, read/write |
| ** |
| ** Use TRAMPOLINE_ENTRY_LOC as a scratchpad. |
| */ |
| mov $TRAMPOLINE_ENTRY_LOC, %eax |
| movl $0x0000ffff, 16(%eax) // Set up the 2 new descriptors |
| movl $0x00cf9b00, 20(%eax) |
| movl $0x0000ffff, 24(%eax) |
| movl $0x00cf9300, 28(%eax) |
| movb $0x2b, 0(%eax) // Set the size |
| movl %eax, 2(%eax) // Set pointer to new GDT |
| lgdt (%eax) // Load it |
| |
| /* finally: jump to kernel */ |
| mov $LINUX_PARAM_LOC, %esi |
| jmp *(LINUX_PARAM_LOC + LINUX_ENTRY_OFFSET) |
| |
| |
| 2: |
| hlt |
| jmp 2b |
| .trampoline_end: |