| |
| Release Notes for |
| ----------------- |
| Mullins Platform Initialization (MullinsPI) |
| |
| ============================================================================= |
| |
| coreboot usage information: |
| |
| AGESA source (binary PI) ---> |
| (3rdparty/pi/amd/00730F01) AGESA PI directory path |
| (FT3b/AGESA.bin) AGESA PI binary file name |
| (0xFFE00000) AGESA PI binary address in ROM |
| |
| config MMCONF_BASE_ADDRESS |
| hex |
| default 0xF8000000 |
| |
| config MMCONF_BUS_NUMBER |
| int |
| default 64 |
| |
| ============================================================================= |
| |
| MullinsPI Version: 1.0.0.A Release Date: July 2015 |
| BinaryPI Version: 1.1 Build date: Aug. 25 2015 |
| Built by coreboot toolchain v1.27 March 8th, 2015 |
| Test Board: Olive Hill Plus |
| |
| ============================================================================= |
| - Update to MullinsPI 1.0.0.A |
| - BUG465142: ECC error injection fails |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.9: |
| |
| - BUG466307: PSP Trustlets is not updated properly |
| |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.8: |
| |
| - ENH466202: PSP FW stack version D.1.1.4D |
| - ENH460470: Remove the PSP DEBUG info to fix system hanging issue |
| - PLAT-986: Initial iTpmControlArea to avoid potential exception |
| - ENH465927: Enable MMIO decode in iTpmGetResponse |
| |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.7: |
| |
| - ENH465438: Add SMBIOS support for Sempron part |
| - ENH465709: PSP FW stack version D.1.1.4A |
| - ENH465474: SMU_Firmware_14_33 |
| |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.6: |
| |
| - ENH465011: PSP FW stack version D.1.1.47 |
| - BUG463002: SATA hardware revision ID gets overwritten |
| - ENH463253: LAN performance data(Auto negotiation/1000M) |
| |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.5: |
| |
| - ENH464327: PSP FW stack version D.1.1.42 |
| - ENH463121: AGESA Memory Option for JEDEC DDR3/DDR4 SPD MAC |
| - BUG455965: System hangs at PC02FF when GFX card(Asic type: Topaz) plugged in |
| - ENH462603: Enable SRT only when the platform really needs to run > 85C |
| |
| |
| Agesa ENHANCEMENTS and FIXED BUGS after 1.0.0.4: |
| |
| - ENH462390: PSP FW stack version D.1.1.36 |
| - ENH457952: Publish PSP fTPM ready PPI |
| - BUG460543: ECC lane fails training |
| - BUG458825: Typo in dec file |
| - ENH455439: Save & Restore PSP Bar3 related register for S3 |
| - BUG458331: Correct Size mismatch of create the recovery guid Hob |
| - ENH455923: Update ALIB to support Windows XP |
| - ENH454744: Save Restore FakeSMI related registers for S3 |
| |
| ============================================================================= |
| |
| ============================================================================= |
| |
| MullinsPI Version: 1.0.0.4 Release Date: Jun. 25 2015 |
| BinaryPI Version: 1.0 |
| |
| ============================================================================= |
| From this commit we use two version numbers to identify binary PI: |
| MullinsPI Version is the AGESA version. This is the same as original |
| MullinsPI. |
| BinaryPI Version is the AGESA.bin version. We will change this version when |
| we upload new AGESA.bin. |
| |
| - Add PspMboxBiosCmdDramInfo and PspMboxBiosCmdExitBootServices to fix |
| Windows 7 hang after graphics driver installed. |
| |
| ============================================================================= |