| /*************************************************************************/ /*! |
| @File |
| @Title Device specific start/stop routines |
| @Copyright Copyright (c) Imagination Technologies Ltd. All Rights Reserved |
| @Description Device specific start/stop routines |
| @License Dual MIT/GPLv2 |
| |
| The contents of this file are subject to the MIT license as set out below. |
| |
| Permission is hereby granted, free of charge, to any person obtaining a copy |
| of this software and associated documentation files (the "Software"), to deal |
| in the Software without restriction, including without limitation the rights |
| to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| copies of the Software, and to permit persons to whom the Software is |
| furnished to do so, subject to the following conditions: |
| |
| The above copyright notice and this permission notice shall be included in |
| all copies or substantial portions of the Software. |
| |
| Alternatively, the contents of this file may be used under the terms of |
| the GNU General Public License Version 2 ("GPL") in which case the provisions |
| of GPL are applicable instead of those above. |
| |
| If you wish to allow use of your version of this file only under the terms of |
| GPL, and not to allow others to use your version of this file under the terms |
| of the MIT license, indicate your decision by deleting the provisions above |
| and replace them with the notice and other provisions required by GPL as set |
| out in the file called "GPL-COPYING" included in this distribution. If you do |
| not delete the provisions above, a recipient may use your version of this file |
| under the terms of either the MIT license or GPL. |
| |
| This License is also included in this distribution in the file called |
| "MIT-COPYING". |
| |
| EXCEPT AS OTHERWISE STATED IN A NEGOTIATED AGREEMENT: (A) THE SOFTWARE IS |
| PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING |
| BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR |
| PURPOSE AND NONINFRINGEMENT; AND (B) IN NO EVENT SHALL THE AUTHORS OR |
| COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| */ /**************************************************************************/ |
| |
| /* The routines implemented here are built on top of an abstraction layer to |
| * hide DDK/OS-specific details in case they are used outside of the DDK |
| * (e.g. when trusted device is enabled). |
| * Any new dependency should be added to rgxlayer_km.h. |
| * Any new code should be built on top of the existing abstraction layer, |
| * which should be extended when necessary. */ |
| #include "rgxstartstop.h" |
| |
| #if defined(SUPPORT_SHARED_SLC) |
| #include "rgxapi_km.h" |
| #include "rgxdevice.h" |
| #endif |
| |
| #define SOC_FEATURE_STRICT_SAME_ADDRESS_WRITE_ORDERING |
| |
| |
| #if !defined(FIX_HW_BRN_37453) |
| /*! |
| ******************************************************************************* |
| |
| @Function RGXEnableClocks |
| |
| @Description Enable RGX Clocks |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void RGXEnableClocks(const void *hPrivate) |
| { |
| RGXCommentLogPower(hPrivate, "RGX clock: use default (automatic clock gating)"); |
| } |
| #endif |
| |
| |
| static PVRSRV_ERROR RGXWriteMetaRegThroughSP(const void *hPrivate, IMG_UINT32 ui32RegAddr, IMG_UINT32 ui32RegValue) |
| { |
| PVRSRV_ERROR eError = PVRSRV_OK; |
| |
| /* Wait for Slave Port to be Ready */ |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_META_SP_MSLVCTRL1, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN); |
| if (eError != PVRSRV_OK) return eError; |
| |
| /* Issue a Write */ |
| RGXWriteReg32(hPrivate, RGX_CR_META_SP_MSLVCTRL0, ui32RegAddr); |
| RGXWriteReg32(hPrivate, RGX_CR_META_SP_MSLVDATAT, ui32RegValue); |
| |
| return eError; |
| } |
| |
| static PVRSRV_ERROR RGXReadMetaRegThroughSP(const void *hPrivate, |
| IMG_UINT32 ui32RegAddr, |
| IMG_UINT32* ui32RegValue) |
| { |
| PVRSRV_ERROR eError = PVRSRV_OK; |
| |
| /* Wait for Slave Port to be Ready */ |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_META_SP_MSLVCTRL1, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN); |
| if (eError != PVRSRV_OK) return eError; |
| |
| /* Issue a Read */ |
| RGXWriteReg32(hPrivate, RGX_CR_META_SP_MSLVCTRL0, ui32RegAddr | RGX_CR_META_SP_MSLVCTRL0_RD_EN); |
| |
| /* Wait for Slave Port to be Ready */ |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_META_SP_MSLVCTRL1, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN|RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN); |
| if (eError != PVRSRV_OK) return eError; |
| |
| #if !defined(NO_HARDWARE) |
| *ui32RegValue = RGXReadReg32(hPrivate, RGX_CR_META_SP_MSLVDATAX); |
| #else |
| *ui32RegValue = 0xFFFFFFFF; |
| #endif |
| |
| return eError; |
| } |
| |
| static PVRSRV_ERROR RGXWriteMetaCoreRegThoughSP(const void *hPrivate, |
| IMG_UINT32 ui32CoreReg, |
| IMG_UINT32 ui32Value) |
| { |
| IMG_UINT32 i = 0; |
| |
| RGXWriteMetaRegThroughSP(hPrivate, META_CR_TXUXXRXDT_OFFSET, ui32Value); |
| RGXWriteMetaRegThroughSP(hPrivate, META_CR_TXUXXRXRQ_OFFSET, ui32CoreReg & ~META_CR_TXUXXRXRQ_RDnWR_BIT); |
| |
| do |
| { |
| RGXReadMetaRegThroughSP(hPrivate, META_CR_TXUXXRXRQ_OFFSET, &ui32Value); |
| } while (((ui32Value & META_CR_TXUXXRXRQ_DREADY_BIT) != META_CR_TXUXXRXRQ_DREADY_BIT) && (i++ < 1000)); |
| |
| if (i == 1000) |
| { |
| RGXCommentLogPower(hPrivate, "RGXWriteMetaCoreRegThoughSP: Timeout"); |
| return PVRSRV_ERROR_TIMEOUT; |
| } |
| |
| return PVRSRV_OK; |
| } |
| |
| static PVRSRV_ERROR RGXStartFirmware(const void *hPrivate) |
| { |
| PVRSRV_ERROR eError; |
| |
| /* Give privilege to debug and slave port */ |
| RGXWriteMetaRegThroughSP(hPrivate, META_CR_SYSC_JTAG_THREAD, META_CR_SYSC_JTAG_THREAD_PRIV_EN); |
| |
| /* Point Meta to the bootloader address, global (uncached) range */ |
| eError = RGXWriteMetaCoreRegThoughSP(hPrivate, |
| PC_ACCESS(0), |
| RGXFW_BOOTLDR_META_ADDR | META_MEM_GLOBAL_RANGE_BIT); |
| |
| if (eError != PVRSRV_OK) |
| { |
| RGXCommentLogPower(hPrivate, "RGXStart: RGX Firmware Slave boot Start failed!"); |
| return eError; |
| } |
| |
| /* Enable minim encoding */ |
| RGXWriteMetaRegThroughSP(hPrivate, META_CR_TXPRIVEXT, META_CR_TXPRIVEXT_MINIM_EN); |
| |
| /* Enable Meta thread */ |
| RGXWriteMetaRegThroughSP(hPrivate, META_CR_T0ENABLE_OFFSET, META_CR_TXENABLE_ENABLE_BIT); |
| |
| return PVRSRV_OK; |
| } |
| |
| /*! |
| ******************************************************************************* |
| |
| @Function RGXInitMetaProcWrapper |
| |
| @Description Configures the hardware wrapper of the META processor |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void RGXInitMetaProcWrapper(const void *hPrivate) |
| { |
| IMG_UINT64 ui64GartenConfig; |
| |
| /* Set Garten IDLE to META idle and Set the Garten Wrapper BIF Fence address */ |
| |
| /* Garten IDLE bit controlled by META */ |
| ui64GartenConfig = RGX_CR_MTS_GARTEN_WRAPPER_CONFIG_IDLE_CTRL_META; |
| |
| /* The fence addr is set at the fw init sequence */ |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| /* Set PC = 0 for fences */ |
| ui64GartenConfig &= RGX_CR_MTS_GARTEN_WRAPPER_CONFIG__S7_TOP__FENCE_PC_BASE_CLRMSK; |
| ui64GartenConfig |= (IMG_UINT64)META_MMU_CONTEXT_MAPPING |
| << RGX_CR_MTS_GARTEN_WRAPPER_CONFIG__S7_TOP__FENCE_PC_BASE_SHIFT; |
| |
| if (!RGXDeviceHasErnBrnPower(hPrivate, FIX_HW_BRN_51281_BIT_MASK)) |
| { |
| /* Ensure the META fences go all the way to external memory */ |
| ui64GartenConfig |= RGX_CR_MTS_GARTEN_WRAPPER_CONFIG__S7_TOP__FENCE_SLC_COHERENT_EN; /* SLC Coherent 1 */ |
| ui64GartenConfig &= RGX_CR_MTS_GARTEN_WRAPPER_CONFIG__S7_TOP__FENCE_PERSISTENCE_CLRMSK; /* SLC Persistence 0 */ |
| } |
| } |
| else |
| { |
| /* Set PC = 0 for fences */ |
| ui64GartenConfig &= RGX_CR_MTS_GARTEN_WRAPPER_CONFIG_FENCE_PC_BASE_CLRMSK; |
| ui64GartenConfig |= (IMG_UINT64)META_MMU_CONTEXT_MAPPING |
| << RGX_CR_MTS_GARTEN_WRAPPER_CONFIG_FENCE_PC_BASE_SHIFT; |
| |
| /* Set SLC DM=META */ |
| ui64GartenConfig |= ((IMG_UINT64) RGXFW_SEGMMU_META_DM_ID) << RGX_CR_MTS_GARTEN_WRAPPER_CONFIG_FENCE_DM_SHIFT; |
| } |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Configure META wrapper"); |
| RGXWriteReg64(hPrivate, RGX_CR_MTS_GARTEN_WRAPPER_CONFIG, ui64GartenConfig); |
| } |
| |
| |
| /*! |
| ******************************************************************************* |
| |
| @Function RGXInitMipsProcWrapper |
| |
| @Description Configures the hardware wrapper of the MIPS processor |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void RGXInitMipsProcWrapper(const void *hPrivate) |
| { |
| IMG_DEV_PHYADDR sPhyAddr; |
| IMG_UINT64 ui64RemapSettings = RGXMIPSFW_BOOT_REMAP_LOG2_SEGMENT_SIZE; /* Same for all remap registers */ |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Configure MIPS wrapper"); |
| |
| /* |
| * MIPS wrapper (registers transaction ID and ISA mode) setup |
| */ |
| |
| RGXAcquireGPURegsAddr(hPrivate, &sPhyAddr); |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Write wrapper config register"); |
| RGXMIPSWrapperConfig(hPrivate, |
| RGX_CR_MIPS_WRAPPER_CONFIG, |
| sPhyAddr.uiAddr, |
| RGXMIPSFW_WRAPPER_CONFIG_REGBANK_ADDR_ALIGN, |
| RGX_CR_MIPS_WRAPPER_CONFIG_BOOT_ISA_MODE_MICROMIPS); |
| |
| /* |
| * Boot remap setup |
| */ |
| |
| RGXAcquireBootRemapAddr(hPrivate, &sPhyAddr); |
| |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| /* Do not mark accesses to a FW code remap region as DRM accesses */ |
| ui64RemapSettings &= RGX_CR_MIPS_ADDR_REMAP1_CONFIG2_TRUSTED_CLRMSK; |
| #endif |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Write boot remap registers"); |
| RGXBootRemapConfig(hPrivate, |
| RGX_CR_MIPS_ADDR_REMAP1_CONFIG1, |
| RGXMIPSFW_BOOT_REMAP_PHYS_ADDR_IN | RGX_CR_MIPS_ADDR_REMAP1_CONFIG1_MODE_ENABLE_EN, |
| RGX_CR_MIPS_ADDR_REMAP1_CONFIG2, |
| sPhyAddr.uiAddr, |
| ~RGX_CR_MIPS_ADDR_REMAP1_CONFIG2_ADDR_OUT_CLRMSK, |
| ui64RemapSettings); |
| |
| /* |
| * Data remap setup |
| */ |
| |
| RGXAcquireDataRemapAddr(hPrivate, &sPhyAddr); |
| |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| /* Remapped data in non-secure memory */ |
| ui64RemapSettings &= RGX_CR_MIPS_ADDR_REMAP1_CONFIG2_TRUSTED_CLRMSK; |
| #endif |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Write data remap registers"); |
| RGXDataRemapConfig(hPrivate, |
| RGX_CR_MIPS_ADDR_REMAP2_CONFIG1, |
| RGXMIPSFW_DATA_REMAP_PHYS_ADDR_IN | RGX_CR_MIPS_ADDR_REMAP2_CONFIG1_MODE_ENABLE_EN, |
| RGX_CR_MIPS_ADDR_REMAP2_CONFIG2, |
| sPhyAddr.uiAddr, |
| ~RGX_CR_MIPS_ADDR_REMAP2_CONFIG2_ADDR_OUT_CLRMSK, |
| ui64RemapSettings); |
| |
| /* |
| * Code remap setup |
| */ |
| |
| RGXAcquireCodeRemapAddr(hPrivate, &sPhyAddr); |
| |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| /* Do not mark accesses to a FW code remap region as DRM accesses */ |
| ui64RemapSettings &= RGX_CR_MIPS_ADDR_REMAP1_CONFIG2_TRUSTED_CLRMSK; |
| #endif |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Write exceptions remap registers"); |
| RGXCodeRemapConfig(hPrivate, |
| RGX_CR_MIPS_ADDR_REMAP3_CONFIG1, |
| RGXMIPSFW_CODE_REMAP_PHYS_ADDR_IN | RGX_CR_MIPS_ADDR_REMAP3_CONFIG1_MODE_ENABLE_EN, |
| RGX_CR_MIPS_ADDR_REMAP3_CONFIG2, |
| sPhyAddr.uiAddr, |
| ~RGX_CR_MIPS_ADDR_REMAP3_CONFIG2_ADDR_OUT_CLRMSK, |
| ui64RemapSettings); |
| |
| /* |
| * Trampoline remap setup |
| */ |
| |
| RGXAcquireTrampolineRemapAddr(hPrivate, &sPhyAddr); |
| ui64RemapSettings = RGXMIPSFW_TRAMPOLINE_LOG2_SEGMENT_SIZE; |
| |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| /* Remapped data in non-secure memory */ |
| ui64RemapSettings &= RGX_CR_MIPS_ADDR_REMAP1_CONFIG2_TRUSTED_CLRMSK; |
| #endif |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Write trampoline remap registers"); |
| RGXTrampolineRemapConfig(hPrivate, |
| RGX_CR_MIPS_ADDR_REMAP4_CONFIG1, |
| sPhyAddr.uiAddr | RGX_CR_MIPS_ADDR_REMAP4_CONFIG1_MODE_ENABLE_EN, |
| RGX_CR_MIPS_ADDR_REMAP4_CONFIG2, |
| RGXMIPSFW_TRAMPOLINE_TARGET_PHYS_ADDR, |
| ~RGX_CR_MIPS_ADDR_REMAP4_CONFIG2_ADDR_OUT_CLRMSK, |
| ui64RemapSettings); |
| |
| /* Garten IDLE bit controlled by MIPS */ |
| RGXCommentLogPower(hPrivate, "RGXStart: Set GARTEN_IDLE type to MIPS"); |
| RGXWriteReg64(hPrivate, RGX_CR_MTS_GARTEN_WRAPPER_CONFIG, RGX_CR_MTS_GARTEN_WRAPPER_CONFIG_IDLE_CTRL_META); |
| |
| /* Turn on the EJTAG probe (only useful driver live) */ |
| RGXWriteReg32(hPrivate, RGX_CR_MIPS_DEBUG_CONFIG, 0); |
| } |
| |
| |
| /*! |
| ******************************************************************************* |
| |
| @Function __RGXInitSLC |
| |
| @Description Initialise RGX SLC |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void __RGXInitSLC(const void *hPrivate) |
| { |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_CACHE_HIERARCHY_BIT_MASK)) |
| { |
| IMG_UINT32 ui32Reg; |
| IMG_UINT32 ui32RegVal; |
| |
| if (RGXDeviceHasErnBrnPower(hPrivate, HW_ERN_51468_BIT_MASK)) |
| { |
| /* |
| * SLC control |
| */ |
| ui32Reg = RGX_CR_SLC3_CTRL_MISC; |
| ui32RegVal = RGX_CR_SLC3_CTRL_MISC_ADDR_DECODE_MODE_WEAVED_HASH | |
| RGX_CR_SLC3_CTRL_MISC_WRITE_COMBINER_EN; |
| RGXWriteReg32(hPrivate, ui32Reg, ui32RegVal); |
| } |
| else |
| { |
| /* |
| * SLC control |
| */ |
| ui32Reg = RGX_CR_SLC3_CTRL_MISC; |
| ui32RegVal = RGX_CR_SLC3_CTRL_MISC_ADDR_DECODE_MODE_SCRAMBLE_PVR_HASH | |
| RGX_CR_SLC3_CTRL_MISC_WRITE_COMBINER_EN; |
| RGXWriteReg32(hPrivate, ui32Reg, ui32RegVal); |
| |
| /* |
| * SLC scramble bits |
| */ |
| { |
| IMG_UINT32 i; |
| IMG_UINT32 ui32Count=0; |
| IMG_UINT32 ui32SLCBanks = RGXGetDeviceSLCBanks(hPrivate); |
| IMG_UINT64 aui64ScrambleValues[4]; |
| IMG_UINT32 aui32ScrambleRegs[] = { |
| RGX_CR_SLC3_SCRAMBLE, |
| RGX_CR_SLC3_SCRAMBLE2, |
| RGX_CR_SLC3_SCRAMBLE3, |
| RGX_CR_SLC3_SCRAMBLE4 |
| }; |
| |
| if (2 == ui32SLCBanks) |
| { |
| aui64ScrambleValues[0] = IMG_UINT64_C(0x6965a99a55696a6a); |
| aui64ScrambleValues[1] = IMG_UINT64_C(0x6aa9aa66959aaa9a); |
| aui64ScrambleValues[2] = IMG_UINT64_C(0x9a5665965a99a566); |
| aui64ScrambleValues[3] = IMG_UINT64_C(0x5aa69596aa66669a); |
| ui32Count = 4; |
| } |
| else if (4 == ui32SLCBanks) |
| { |
| aui64ScrambleValues[0] = IMG_UINT64_C(0xc6788d722dd29ce4); |
| aui64ScrambleValues[1] = IMG_UINT64_C(0x7272e4e11b279372); |
| aui64ScrambleValues[2] = IMG_UINT64_C(0x87d872d26c6c4be1); |
| aui64ScrambleValues[3] = IMG_UINT64_C(0xe1b4878d4b36e478); |
| ui32Count = 4; |
| |
| } |
| else if (8 == ui32SLCBanks) |
| { |
| aui64ScrambleValues[0] = IMG_UINT64_C(0x859d6569e8fac688); |
| aui64ScrambleValues[1] = IMG_UINT64_C(0xf285e1eae4299d33); |
| aui64ScrambleValues[2] = IMG_UINT64_C(0x1e1af2be3c0aa447); |
| ui32Count = 3; |
| } |
| |
| for (i = 0; i < ui32Count; i++) |
| { |
| IMG_UINT32 ui32Reg = aui32ScrambleRegs[i]; |
| IMG_UINT64 ui64Value = aui64ScrambleValues[i]; |
| RGXWriteReg64(hPrivate, ui32Reg, ui64Value); |
| } |
| } |
| } |
| |
| if (RGXDeviceHasErnBrnPower(hPrivate, HW_ERN_45914_BIT_MASK)) |
| { |
| /* Disable the forced SLC coherency which the hardware enables for compatibility with older pdumps */ |
| RGXCommentLogPower(hPrivate, "Disable forced SLC coherency"); |
| RGXWriteReg64(hPrivate, RGX_CR_GARTEN_SLC, 0); |
| } |
| } |
| else |
| { |
| IMG_UINT32 ui32Reg; |
| IMG_UINT32 ui32RegVal; |
| |
| #if defined(FIX_HW_BRN_36492) |
| /* Because the WA for this BRN forbids using SLC reset, need to inval it instead */ |
| RGXCommentLogPower(hPrivate, "Invalidate the SLC"); |
| RGXWriteReg32(hPrivate, RGX_CR_SLC_CTRL_FLUSH_INVAL, RGX_CR_SLC_CTRL_FLUSH_INVAL_ALL_EN); |
| |
| /* Poll for completion */ |
| RGXPollReg32(hPrivate, RGX_CR_SLC_STATUS0, 0x0, RGX_CR_SLC_STATUS0_MASKFULL); |
| #endif |
| |
| /* |
| * SLC Bypass control |
| */ |
| ui32Reg = RGX_CR_SLC_CTRL_BYPASS; |
| ui32RegVal = 0; |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_SLCSIZE8_BIT_MASK) || |
| RGXDeviceHasErnBrnPower(hPrivate, FIX_HW_BRN_61450_BIT_MASK)) |
| { |
| RGXCommentLogPower(hPrivate, "Bypass SLC for IPF_OBJ and IPF_CPF"); |
| ui32RegVal |= RGX_CR_SLC_CTRL_BYPASS_REQ_IPF_OBJ_EN | RGX_CR_SLC_CTRL_BYPASS_REQ_IPF_CPF_EN; |
| } |
| |
| if (RGXGetDeviceSLCSize(hPrivate) < (128*1024)) |
| { |
| /* Bypass SLC for textures if the SLC size is less than 128kB */ |
| RGXCommentLogPower(hPrivate, "Bypass SLC for TPU"); |
| ui32RegVal |= RGX_CR_SLC_CTRL_BYPASS_REQ_TPU_EN; |
| } |
| |
| if (ui32RegVal != 0) |
| { |
| RGXWriteReg32(hPrivate, ui32Reg, ui32RegVal); |
| } |
| |
| /* |
| * SLC Misc control. |
| * |
| * Note: This is a 64bit register and we set only the lower 32bits leaving the top |
| * 32bits (RGX_CR_SLC_CTRL_MISC_SCRAMBLE_BITS) unchanged from the HW default. |
| */ |
| ui32Reg = RGX_CR_SLC_CTRL_MISC; |
| ui32RegVal = (RGXReadReg32(hPrivate, ui32Reg) & RGX_CR_SLC_CTRL_MISC_ENABLE_PSG_HAZARD_CHECK_EN) | |
| RGX_CR_SLC_CTRL_MISC_ADDR_DECODE_MODE_PVR_HASH1; |
| if (RGXDeviceHasErnBrnPower(hPrivate, FIX_HW_BRN_60084_BIT_MASK)) |
| { |
| #if !defined(SOC_FEATURE_STRICT_SAME_ADDRESS_WRITE_ORDERING) |
| ui32RegVal |= RGX_CR_SLC_CTRL_MISC_ENABLE_PSG_HAZARD_CHECK_EN; |
| #else |
| if (RGXDeviceHasErnBrnPower(hPrivate, HW_ERN_61389_BIT_MASK)) |
| { |
| ui32RegVal |= RGX_CR_SLC_CTRL_MISC_ENABLE_PSG_HAZARD_CHECK_EN; |
| } |
| #endif |
| } |
| /* Bypass burst combiner if SLC line size is smaller than 1024 bits */ |
| if (RGXGetDeviceCacheLineSize(hPrivate) < 1024) |
| { |
| ui32RegVal |= RGX_CR_SLC_CTRL_MISC_BYPASS_BURST_COMBINER_EN; |
| } |
| |
| RGXWriteReg32(hPrivate, ui32Reg, ui32RegVal); |
| } |
| } |
| |
| |
| /*! |
| ******************************************************************************* |
| |
| @Function RGXInitBIF |
| |
| @Description Initialise RGX BIF |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void RGXInitBIF(const void *hPrivate) |
| { |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_MIPS_BIT_MASK)) |
| { |
| IMG_DEV_PHYADDR sPCAddr; |
| |
| /* |
| * Acquire the address of the Kernel Page Catalogue. |
| */ |
| RGXAcquireKernelMMUPC(hPrivate, &sPCAddr); |
| |
| /* |
| * Write the kernel catalogue base. |
| */ |
| RGXCommentLogPower(hPrivate, "RGX firmware MMU Page Catalogue"); |
| |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_SLC_VIVT_BIT_MASK)) |
| { |
| /* Write the cat-base address */ |
| RGXWriteKernelMMUPC64(hPrivate, |
| RGX_CR_BIF_CAT_BASE0, |
| RGX_CR_BIF_CAT_BASE0_ADDR_ALIGNSHIFT, |
| RGX_CR_BIF_CAT_BASE0_ADDR_SHIFT, |
| ((sPCAddr.uiAddr |
| >> RGX_CR_BIF_CAT_BASE0_ADDR_ALIGNSHIFT) |
| << RGX_CR_BIF_CAT_BASE0_ADDR_SHIFT) |
| & ~RGX_CR_BIF_CAT_BASE0_ADDR_CLRMSK); |
| /* |
| * Trusted Firmware boot |
| */ |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| RGXCommentLogPower(hPrivate, "RGXInitBIF: Trusted Device enabled"); |
| RGXWriteReg32(hPrivate, RGX_CR_BIF_TRUST, RGX_CR_BIF_TRUST_ENABLE_EN); |
| #endif |
| } |
| else |
| { |
| IMG_UINT32 uiPCAddr; |
| uiPCAddr = (((sPCAddr.uiAddr >> RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_ALIGNSHIFT) |
| << RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_SHIFT) |
| & ~RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_CLRMSK); |
| /* Set the mapping context */ |
| RGXWriteReg32(hPrivate, RGX_CR_MMU_CBASE_MAPPING_CONTEXT, 0); |
| |
| /* Write the cat-base address */ |
| RGXWriteKernelMMUPC32(hPrivate, |
| RGX_CR_MMU_CBASE_MAPPING, |
| RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_ALIGNSHIFT, |
| RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_SHIFT, |
| uiPCAddr); |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| /* Set-up MMU ID 1 mapping to the same PC used by MMU ID 0 */ |
| RGXWriteReg32(hPrivate, RGX_CR_MMU_CBASE_MAPPING_CONTEXT, 1); |
| RGXWriteKernelMMUPC32(hPrivate, |
| RGX_CR_MMU_CBASE_MAPPING, |
| RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_ALIGNSHIFT, |
| RGX_CR_MMU_CBASE_MAPPING_BASE_ADDR_SHIFT, |
| uiPCAddr); |
| #endif /* SUPPORT_TRUSTED_DEVICE */ |
| } |
| } |
| else |
| { |
| /* |
| * Trusted Firmware boot |
| */ |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| RGXCommentLogPower(hPrivate, "RGXInitBIF: Trusted Device enabled"); |
| RGXWriteReg32(hPrivate, RGX_CR_BIF_TRUST, RGX_CR_BIF_TRUST_ENABLE_EN); |
| #endif |
| } |
| } |
| |
| |
| /*! |
| ******************************************************************************* |
| |
| @Function RGXAXIACELiteInit |
| |
| @Description Initialise AXI-ACE Lite interface |
| |
| @Input hPrivate : Implementation specific data |
| |
| @Return void |
| |
| ******************************************************************************/ |
| static void RGXAXIACELiteInit(const void *hPrivate) |
| { |
| IMG_UINT32 ui32RegAddr; |
| IMG_UINT64 ui64RegVal; |
| |
| ui32RegAddr = RGX_CR_AXI_ACE_LITE_CONFIGURATION; |
| |
| /* Setup AXI-ACE config. Set everything to outer cache */ |
| ui64RegVal = (3U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_AWDOMAIN_NON_SNOOPING_SHIFT) | |
| (3U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_ARDOMAIN_NON_SNOOPING_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_ARDOMAIN_CACHE_MAINTENANCE_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_AWDOMAIN_COHERENT_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_ARDOMAIN_COHERENT_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_AWCACHE_COHERENT_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_ARCACHE_COHERENT_SHIFT) | |
| (2U << RGX_CR_AXI_ACE_LITE_CONFIGURATION_ARCACHE_CACHE_MAINTENANCE_SHIFT); |
| |
| if (RGXDeviceHasErnBrnPower(hPrivate, FIX_HW_BRN_42321_BIT_MASK)) |
| { |
| ui64RegVal |= (((IMG_UINT64) 1) << RGX_CR_AXI_ACE_LITE_CONFIGURATION_DISABLE_COHERENT_WRITELINEUNIQUE_SHIFT); |
| } |
| |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_SLC_VIVT_BIT_MASK)) |
| { |
| RGXCommentLogPower(hPrivate, "OSID 0 and 1 are trusted"); |
| ui64RegVal |= IMG_UINT64_C(0xFC) |
| << RGX_CR_AXI_ACE_LITE_CONFIGURATION_OSID_SECURITY_SHIFT; |
| } |
| #endif |
| |
| RGXCommentLogPower(hPrivate, "Init AXI-ACE interface"); |
| RGXWriteReg64(hPrivate, ui32RegAddr, ui64RegVal); |
| } |
| |
| |
| PVRSRV_ERROR RGXStart(const void *hPrivate) |
| { |
| PVRSRV_ERROR eError = PVRSRV_OK; |
| IMG_BOOL bDoFWSlaveBoot; |
| IMG_CHAR *pcRGXFW_PROCESSOR; |
| IMG_BOOL bMetaFW; |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_MIPS_BIT_MASK)) |
| { |
| pcRGXFW_PROCESSOR = RGXFW_PROCESSOR_MIPS; |
| bMetaFW = IMG_FALSE; |
| bDoFWSlaveBoot = IMG_FALSE; |
| } |
| else |
| { |
| pcRGXFW_PROCESSOR = RGXFW_PROCESSOR_META; |
| bMetaFW = IMG_TRUE; |
| bDoFWSlaveBoot = RGXDoFWSlaveBoot(hPrivate); |
| } |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_SYS_BUS_SECURE_RESET_BIT_MASK)) |
| { |
| /* Disable the default sys_bus_secure protection to perform minimal setup */ |
| RGXCommentLogPower(hPrivate, "RGXStart: Disable sys_bus_secure"); |
| RGXWriteReg32(hPrivate, RGX_CR_SYS_BUS_SECURE, 0); |
| (void) RGXReadReg32(hPrivate, RGX_CR_SYS_BUS_SECURE); /* Fence write */ |
| } |
| |
| #if defined(FIX_HW_BRN_37453) |
| /* Force all clocks on*/ |
| RGXCommentLogPower(hPrivate, "RGXStart: force all clocks on"); |
| RGXWriteReg64(hPrivate, RGX_CR_CLK_CTRL, RGX_CR_CLK_CTRL_ALL_ON); |
| #endif |
| |
| #if defined(SUPPORT_SHARED_SLC) && !defined(FIX_HW_BRN_36492) |
| /* When the SLC is shared, the SLC reset is performed by the System layer when calling |
| * RGXInitSLC (before any device uses it), therefore mask out the SLC bit to avoid |
| * soft_resetting it here. If HW_BRN_36492, the bit is already masked out. |
| */ |
| #define RGX_CR_SOFT_RESET_ALL (RGX_CR_SOFT_RESET_MASKFULL ^ RGX_CR_SOFT_RESET_SLC_EN) |
| RGXCommentLogPower(hPrivate, "RGXStart: Shared SLC (don't reset SLC as part of RGX reset)"); |
| #else |
| #define RGX_CR_SOFT_RESET_ALL (RGX_CR_SOFT_RESET_MASKFULL) |
| #endif |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| /* Set RGX in soft-reset */ |
| RGXCommentLogPower(hPrivate, "RGXStart: soft reset assert step 1"); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_S7_SOFT_RESET_DUSTS); |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: soft reset assert step 2"); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_S7_SOFT_RESET_JONES_ALL | RGX_S7_SOFT_RESET_DUSTS); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET2, RGX_S7_SOFT_RESET2); |
| |
| /* Read soft-reset to fence previous write in order to clear the SOCIF pipeline */ |
| (void) RGXReadReg64(hPrivate, RGX_CR_SOFT_RESET); |
| |
| /* Take everything out of reset but META/MIPS */ |
| RGXCommentLogPower(hPrivate, "RGXStart: soft reset de-assert step 1 excluding %s", pcRGXFW_PROCESSOR); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_S7_SOFT_RESET_DUSTS | RGX_CR_SOFT_RESET_GARTEN_EN); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET2, 0x0); |
| |
| (void) RGXReadReg64(hPrivate, RGX_CR_SOFT_RESET); |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: soft reset de-assert step 2 excluding %s", pcRGXFW_PROCESSOR); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_CR_SOFT_RESET_GARTEN_EN); |
| |
| (void) RGXReadReg64(hPrivate, RGX_CR_SOFT_RESET); |
| } |
| else |
| { |
| /* Set RGX in soft-reset */ |
| RGXCommentLogPower(hPrivate, "RGXStart: soft reset everything"); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_CR_SOFT_RESET_ALL); |
| |
| /* Take Rascal and Dust out of reset */ |
| RGXCommentLogPower(hPrivate, "RGXStart: Rascal and Dust out of reset"); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_CR_SOFT_RESET_ALL ^ RGX_CR_SOFT_RESET_RASCALDUSTS_EN); |
| |
| /* Read soft-reset to fence previous write in order to clear the SOCIF pipeline */ |
| (void) RGXReadReg64(hPrivate, RGX_CR_SOFT_RESET); |
| |
| /* Take everything out of reset but META/MIPS */ |
| RGXCommentLogPower(hPrivate, "RGXStart: Take everything out of reset but %s", pcRGXFW_PROCESSOR); |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, RGX_CR_SOFT_RESET_GARTEN_EN); |
| } |
| |
| |
| #if !defined(FIX_HW_BRN_37453) |
| /* Enable clocks */ |
| RGXEnableClocks(hPrivate); |
| #endif |
| |
| /* |
| * Initialise SLC. |
| */ |
| #if !defined(SUPPORT_SHARED_SLC) |
| __RGXInitSLC(hPrivate); |
| #endif |
| |
| if (bMetaFW) |
| { |
| if (bDoFWSlaveBoot) |
| { |
| /* Configure META to Slave boot */ |
| RGXCommentLogPower(hPrivate, "RGXStart: META Slave boot"); |
| RGXWriteReg32(hPrivate, RGX_CR_META_BOOT, 0); |
| |
| } |
| else |
| { |
| /* Configure META to Master boot */ |
| RGXCommentLogPower(hPrivate, "RGXStart: META Master boot"); |
| RGXWriteReg32(hPrivate, RGX_CR_META_BOOT, RGX_CR_META_BOOT_MODE_EN); |
| } |
| } |
| |
| /* |
| * Initialise Firmware wrapper |
| */ |
| if (bMetaFW) |
| { |
| RGXInitMetaProcWrapper(hPrivate); |
| } |
| else |
| { |
| RGXInitMipsProcWrapper(hPrivate); |
| } |
| |
| if (RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_AXI_ACELITE_BIT_MASK)) |
| { |
| /* We must init the AXI-ACE interface before 1st BIF transaction */ |
| RGXAXIACELiteInit(hPrivate); |
| } |
| |
| /* |
| * Initialise BIF. |
| */ |
| RGXInitBIF(hPrivate); |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: Take %s out of reset", pcRGXFW_PROCESSOR); |
| |
| /* Need to wait for at least 16 cycles before taking META/MIPS out of reset ... */ |
| RGXWaitCycles(hPrivate, 32, 3); |
| |
| RGXWriteReg64(hPrivate, RGX_CR_SOFT_RESET, 0x0); |
| (void) RGXReadReg64(hPrivate, RGX_CR_SOFT_RESET); |
| |
| /* ... and afterwards */ |
| RGXWaitCycles(hPrivate, 32, 3); |
| |
| #if defined(FIX_HW_BRN_37453) |
| /* We rely on the 32 clk sleep from above */ |
| |
| /* Switch clocks back to auto */ |
| RGXCommentLogPower(hPrivate, "RGXStart: set clocks back to auto"); |
| RGXWriteReg64(hPrivate, RGX_CR_CLK_CTRL, RGX_CR_CLK_CTRL_ALL_AUTO); |
| #endif |
| |
| if (bMetaFW && bDoFWSlaveBoot) |
| { |
| eError = RGXIOCoherencyTest(hPrivate); |
| if (eError != PVRSRV_OK) return eError; |
| |
| RGXCommentLogPower(hPrivate, "RGXStart: RGX Firmware Slave boot Start"); |
| eError = RGXStartFirmware(hPrivate); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| else |
| { |
| RGXCommentLogPower(hPrivate, "RGXStart: RGX Firmware Master boot Start"); |
| } |
| |
| /* Enable Sys Bus security */ |
| #if defined(SUPPORT_TRUSTED_DEVICE) |
| RGXCommentLogPower(hPrivate, "RGXStart: Enable sys_bus_secure"); |
| RGXWriteReg32(hPrivate, RGX_CR_SYS_BUS_SECURE, RGX_CR_SYS_BUS_SECURE_ENABLE_EN); |
| (void) RGXReadReg32(hPrivate, RGX_CR_SYS_BUS_SECURE); /* Fence write */ |
| #endif |
| |
| return eError; |
| } |
| |
| static INLINE void ClearIRQStatusRegister(const void *hPrivate, IMG_BOOL bMetaFW) |
| { |
| IMG_UINT32 ui32IRQClearReg; |
| IMG_UINT32 ui32IRQClearMask; |
| |
| if(bMetaFW) |
| { |
| ui32IRQClearReg = RGX_CR_META_SP_MSLVIRQSTATUS; |
| ui32IRQClearMask = RGX_CR_META_SP_MSLVIRQSTATUS_TRIGVECT2_CLRMSK; |
| } |
| else |
| { |
| ui32IRQClearReg = RGX_CR_MIPS_WRAPPER_IRQ_CLEAR; |
| ui32IRQClearMask = RGX_CR_MIPS_WRAPPER_IRQ_CLEAR_EVENT_EN; |
| } |
| |
| RGXWriteReg32(hPrivate, ui32IRQClearReg, ui32IRQClearMask); |
| |
| #if defined(RGX_FEATURE_OCPBUS) |
| RGXWriteReg32(hPrivate, RGX_CR_OCP_IRQSTATUS_2, RGX_CR_OCP_IRQSTATUS_2_RGX_IRQ_STATUS_EN); |
| #endif |
| } |
| |
| PVRSRV_ERROR RGXStop(const void *hPrivate) |
| { |
| IMG_BOOL bMetaFW = !RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_MIPS_BIT_MASK); |
| PVRSRV_ERROR eError; |
| |
| ClearIRQStatusRegister(hPrivate, bMetaFW); |
| |
| /* Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper */ |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SIDEKICK_IDLE, |
| RGX_CR_SIDEKICK_IDLE_MASKFULL^(RGX_CR_SIDEKICK_IDLE_GARTEN_EN|RGX_CR_SIDEKICK_IDLE_SOCIF_EN|RGX_CR_SIDEKICK_IDLE_HOSTIF_EN), |
| RGX_CR_SIDEKICK_IDLE_MASKFULL^(RGX_CR_SIDEKICK_IDLE_GARTEN_EN|RGX_CR_SIDEKICK_IDLE_SOCIF_EN|RGX_CR_SIDEKICK_IDLE_HOSTIF_EN)); |
| } |
| else |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_JONES_IDLE, |
| RGX_CR_JONES_IDLE_MASKFULL^(RGX_CR_JONES_IDLE_GARTEN_EN|RGX_CR_JONES_IDLE_SOCIF_EN|RGX_CR_JONES_IDLE_HOSTIF_EN), |
| RGX_CR_JONES_IDLE_MASKFULL^(RGX_CR_JONES_IDLE_GARTEN_EN|RGX_CR_JONES_IDLE_SOCIF_EN|RGX_CR_JONES_IDLE_HOSTIF_EN)); |
| } |
| |
| if (eError != PVRSRV_OK) return eError; |
| |
| |
| #if !defined(SUPPORT_SHARED_SLC) |
| /* Wait for SLC to signal IDLE */ |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SLC_IDLE, |
| RGX_CR_SLC_IDLE_MASKFULL, |
| RGX_CR_SLC_IDLE_MASKFULL); |
| } |
| else |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SLC3_IDLE, |
| RGX_CR_SLC3_IDLE_MASKFULL, |
| RGX_CR_SLC3_IDLE_MASKFULL); |
| } |
| #endif /* SUPPORT_SHARED_SLC */ |
| if (eError != PVRSRV_OK) return eError; |
| |
| |
| /* Unset MTS DM association with threads */ |
| RGXWriteReg32(hPrivate, |
| RGX_CR_MTS_INTCTX_THREAD0_DM_ASSOC, |
| RGX_CR_MTS_INTCTX_THREAD0_DM_ASSOC_DM_ASSOC_CLRMSK |
| & RGX_CR_MTS_INTCTX_THREAD0_DM_ASSOC_MASKFULL); |
| RGXWriteReg32(hPrivate, |
| RGX_CR_MTS_BGCTX_THREAD0_DM_ASSOC, |
| RGX_CR_MTS_BGCTX_THREAD0_DM_ASSOC_DM_ASSOC_CLRMSK |
| & RGX_CR_MTS_BGCTX_THREAD0_DM_ASSOC_MASKFULL); |
| RGXWriteReg32(hPrivate, |
| RGX_CR_MTS_INTCTX_THREAD1_DM_ASSOC, |
| RGX_CR_MTS_INTCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK |
| & RGX_CR_MTS_INTCTX_THREAD1_DM_ASSOC_MASKFULL); |
| RGXWriteReg32(hPrivate, |
| RGX_CR_MTS_BGCTX_THREAD1_DM_ASSOC, |
| RGX_CR_MTS_BGCTX_THREAD1_DM_ASSOC_DM_ASSOC_CLRMSK |
| & RGX_CR_MTS_BGCTX_THREAD1_DM_ASSOC_MASKFULL); |
| |
| |
| #if defined(PDUMP) |
| if (bMetaFW) |
| { |
| /* Disabling threads is only required for pdumps to stop the fw gracefully */ |
| |
| /* Disable thread 0 */ |
| eError = RGXWriteMetaRegThroughSP(hPrivate, |
| META_CR_T0ENABLE_OFFSET, |
| ~META_CR_TXENABLE_ENABLE_BIT); |
| if (eError != PVRSRV_OK) return eError; |
| |
| /* Disable thread 1 */ |
| eError = RGXWriteMetaRegThroughSP(hPrivate, |
| META_CR_T1ENABLE_OFFSET, |
| ~META_CR_TXENABLE_ENABLE_BIT); |
| if (eError != PVRSRV_OK) return eError; |
| |
| /* Clear down any irq raised by META (done after disabling the FW |
| * threads to avoid a race condition). |
| * This is only really needed for PDumps but we do it anyway driver-live. |
| */ |
| RGXWriteReg32(hPrivate, RGX_CR_META_SP_MSLVIRQSTATUS, 0x0); |
| |
| /* Wait for the Slave Port to finish all the transactions */ |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_META_SP_MSLVCTRL1, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN | RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN, |
| RGX_CR_META_SP_MSLVCTRL1_READY_EN | RGX_CR_META_SP_MSLVCTRL1_GBLPORT_IDLE_EN); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| #endif |
| |
| |
| /* Extra Idle checks */ |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_BIF_STATUS_MMU, |
| 0, |
| RGX_CR_BIF_STATUS_MMU_MASKFULL); |
| if (eError != PVRSRV_OK) return eError; |
| |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_BIFPM_STATUS_MMU, |
| 0, |
| RGX_CR_BIFPM_STATUS_MMU_MASKFULL); |
| if (eError != PVRSRV_OK) return eError; |
| |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK) && |
| !RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_XT_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_BIF_READS_EXT_STATUS, |
| 0, |
| RGX_CR_BIF_READS_EXT_STATUS_MASKFULL); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| |
| |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_BIFPM_READS_EXT_STATUS, |
| 0, |
| RGX_CR_BIFPM_READS_EXT_STATUS_MASKFULL); |
| if (eError != PVRSRV_OK) return eError; |
| |
| { |
| IMG_UINT64 ui64SLCMask = RGX_CR_SLC_STATUS1_MASKFULL; |
| eError = RGXPollReg64(hPrivate, |
| RGX_CR_SLC_STATUS1, |
| 0, |
| ui64SLCMask); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| |
| if (4 == RGXGetDeviceSLCBanks(hPrivate)) |
| { |
| eError = RGXPollReg64(hPrivate, |
| RGX_CR_SLC_STATUS2, |
| 0, |
| RGX_CR_SLC_STATUS2_MASKFULL); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| |
| #if !defined(SUPPORT_SHARED_SLC) |
| /* Wait for SLC to signal IDLE */ |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SLC_IDLE, |
| RGX_CR_SLC_IDLE_MASKFULL, |
| RGX_CR_SLC_IDLE_MASKFULL); |
| } |
| else |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SLC3_IDLE, |
| RGX_CR_SLC3_IDLE_MASKFULL, |
| RGX_CR_SLC3_IDLE_MASKFULL); |
| } |
| #endif /* SUPPORT_SHARED_SLC */ |
| if (eError != PVRSRV_OK) return eError; |
| |
| |
| /* Wait for Sidekick/Jones to signal IDLE except for the Garten Wrapper */ |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SIDEKICK_IDLE, |
| RGX_CR_SIDEKICK_IDLE_MASKFULL^(RGX_CR_SIDEKICK_IDLE_GARTEN_EN|RGX_CR_SIDEKICK_IDLE_SOCIF_EN|RGX_CR_SIDEKICK_IDLE_HOSTIF_EN), |
| RGX_CR_SIDEKICK_IDLE_MASKFULL^(RGX_CR_SIDEKICK_IDLE_GARTEN_EN|RGX_CR_SIDEKICK_IDLE_SOCIF_EN|RGX_CR_SIDEKICK_IDLE_HOSTIF_EN)); |
| } |
| else |
| { |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_FASTRENDER_DM_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_JONES_IDLE, |
| RGX_CR_JONES_IDLE_MASKFULL^(RGX_CR_JONES_IDLE_GARTEN_EN|RGX_CR_JONES_IDLE_SOCIF_EN|RGX_CR_JONES_IDLE_HOSTIF_EN), |
| RGX_CR_JONES_IDLE_MASKFULL^(RGX_CR_JONES_IDLE_GARTEN_EN|RGX_CR_JONES_IDLE_SOCIF_EN|RGX_CR_JONES_IDLE_HOSTIF_EN)); |
| } |
| } |
| |
| if (eError != PVRSRV_OK) return eError; |
| |
| |
| if (bMetaFW) |
| { |
| IMG_UINT32 ui32RegValue; |
| |
| eError = RGXReadMetaRegThroughSP(hPrivate, |
| META_CR_TxVECINT_BHALT, |
| &ui32RegValue); |
| if (eError != PVRSRV_OK) return eError; |
| |
| if ((ui32RegValue & 0xFFFFFFFFU) == 0x0) |
| { |
| /* Wait for Sidekick/Jones to signal IDLE including |
| * the Garten Wrapper if there is no debugger attached |
| * (TxVECINT_BHALT = 0x0) */ |
| if (!RGXDeviceHasFeaturePower(hPrivate, RGX_FEATURE_S7_TOP_INFRASTRUCTURE_BIT_MASK)) |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SIDEKICK_IDLE, |
| RGX_CR_SIDEKICK_IDLE_GARTEN_EN, |
| RGX_CR_SIDEKICK_IDLE_GARTEN_EN); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| else |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_JONES_IDLE, |
| RGX_CR_JONES_IDLE_GARTEN_EN, |
| RGX_CR_JONES_IDLE_GARTEN_EN); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| } |
| } |
| else |
| { |
| eError = RGXPollReg32(hPrivate, |
| RGX_CR_SIDEKICK_IDLE, |
| RGX_CR_SIDEKICK_IDLE_GARTEN_EN, |
| RGX_CR_SIDEKICK_IDLE_GARTEN_EN); |
| if (eError != PVRSRV_OK) return eError; |
| } |
| |
| return eError; |
| } |
| |
| |
| /* |
| * RGXInitSLC |
| */ |
| #if defined(SUPPORT_SHARED_SLC) |
| PVRSRV_ERROR RGXInitSLC(IMG_HANDLE hDevHandle) |
| { |
| PVRSRV_DEVICE_NODE *psDeviceNode = hDevHandle; |
| PVRSRV_RGXDEV_INFO *psDevInfo; |
| void *pvPowerParams; |
| |
| if (psDeviceNode == NULL) |
| { |
| return PVRSRV_ERROR_INVALID_PARAMS; |
| } |
| psDevInfo = psDeviceNode->pvDevice; |
| pvPowerParams = &psDevInfo->sPowerParams; |
| |
| #if !defined(FIX_HW_BRN_36492) |
| /* reset the SLC */ |
| RGXCommentLogPower(pvPowerParams, "RGXInitSLC: soft reset SLC"); |
| RGXWriteReg64(pvPowerParams, RGX_CR_SOFT_RESET, RGX_CR_SOFT_RESET_SLC_EN); |
| |
| /* Read soft-reset to fence previous write in order to clear the SOCIF pipeline */ |
| (void) RGXReadReg64(pvPowerParams, RGX_CR_SOFT_RESET); |
| |
| /* Take everything out of reset */ |
| RGXWriteReg64(pvPowerParams, RGX_CR_SOFT_RESET, 0x0); |
| #endif |
| |
| __RGXInitSLC(pvPowerParams); |
| |
| return PVRSRV_OK; |
| } |
| #endif |
| |
