|  | /* | 
|  | * simple driver for PWM (Pulse Width Modulator) controller | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/pwm.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_device.h> | 
|  |  | 
|  | /* i.MX1 and i.MX21 share the same PWM function block: */ | 
|  |  | 
|  | #define MX1_PWMC			0x00   /* PWM Control Register */ | 
|  | #define MX1_PWMS			0x04   /* PWM Sample Register */ | 
|  | #define MX1_PWMP			0x08   /* PWM Period Register */ | 
|  |  | 
|  | #define MX1_PWMC_EN			(1 << 4) | 
|  |  | 
|  | /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ | 
|  |  | 
|  | #define MX3_PWMCR			0x00    /* PWM Control Register */ | 
|  | #define MX3_PWMSR			0x04    /* PWM Status Register */ | 
|  | #define MX3_PWMSAR			0x0C    /* PWM Sample Register */ | 
|  | #define MX3_PWMPR			0x10    /* PWM Period Register */ | 
|  | #define MX3_PWMCR_PRESCALER(x)		((((x) - 1) & 0xFFF) << 4) | 
|  | #define MX3_PWMCR_DOZEEN		(1 << 24) | 
|  | #define MX3_PWMCR_WAITEN		(1 << 23) | 
|  | #define MX3_PWMCR_DBGEN			(1 << 22) | 
|  | #define MX3_PWMCR_CLKSRC_IPG_HIGH	(2 << 16) | 
|  | #define MX3_PWMCR_CLKSRC_IPG		(1 << 16) | 
|  | #define MX3_PWMCR_SWR			(1 << 3) | 
|  | #define MX3_PWMCR_EN			(1 << 0) | 
|  | #define MX3_PWMSR_FIFOAV_4WORDS		0x4 | 
|  | #define MX3_PWMSR_FIFOAV_MASK		0x7 | 
|  |  | 
|  | #define MX3_PWM_SWR_LOOP		5 | 
|  |  | 
|  | struct imx_chip { | 
|  | struct clk	*clk_per; | 
|  | struct clk	*clk_ipg; | 
|  |  | 
|  | void __iomem	*mmio_base; | 
|  |  | 
|  | struct pwm_chip	chip; | 
|  |  | 
|  | int (*config)(struct pwm_chip *chip, | 
|  | struct pwm_device *pwm, int duty_ns, int period_ns); | 
|  | void (*set_enable)(struct pwm_chip *chip, bool enable); | 
|  | }; | 
|  |  | 
|  | #define to_imx_chip(chip)	container_of(chip, struct imx_chip, chip) | 
|  |  | 
|  | static int imx_pwm_config_v1(struct pwm_chip *chip, | 
|  | struct pwm_device *pwm, int duty_ns, int period_ns) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  |  | 
|  | /* | 
|  | * The PWM subsystem allows for exact frequencies. However, | 
|  | * I cannot connect a scope on my device to the PWM line and | 
|  | * thus cannot provide the program the PWM controller | 
|  | * exactly. Instead, I'm relying on the fact that the | 
|  | * Bootloader (u-boot or WinCE+haret) has programmed the PWM | 
|  | * function group already. So I'll just modify the PWM sample | 
|  | * register to follow the ratio of duty_ns vs. period_ns | 
|  | * accordingly. | 
|  | * | 
|  | * This is good enough for programming the brightness of | 
|  | * the LCD backlight. | 
|  | * | 
|  | * The real implementation would divide PERCLK[0] first by | 
|  | * both the prescaler (/1 .. /128) and then by CLKSEL | 
|  | * (/2 .. /16). | 
|  | */ | 
|  | u32 max = readl(imx->mmio_base + MX1_PWMP); | 
|  | u32 p = max * duty_ns / period_ns; | 
|  | writel(max - p, imx->mmio_base + MX1_PWMS); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  | u32 val; | 
|  |  | 
|  | val = readl(imx->mmio_base + MX1_PWMC); | 
|  |  | 
|  | if (enable) | 
|  | val |= MX1_PWMC_EN; | 
|  | else | 
|  | val &= ~MX1_PWMC_EN; | 
|  |  | 
|  | writel(val, imx->mmio_base + MX1_PWMC); | 
|  | } | 
|  |  | 
|  | static int imx_pwm_config_v2(struct pwm_chip *chip, | 
|  | struct pwm_device *pwm, int duty_ns, int period_ns) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  | struct device *dev = chip->dev; | 
|  | unsigned long long c; | 
|  | unsigned long period_cycles, duty_cycles, prescale; | 
|  | unsigned int period_ms; | 
|  | bool enable = pwm_is_enabled(pwm); | 
|  | int wait_count = 0, fifoav; | 
|  | u32 cr, sr; | 
|  |  | 
|  | /* | 
|  | * i.MX PWMv2 has a 4-word sample FIFO. | 
|  | * In order to avoid FIFO overflow issue, we do software reset | 
|  | * to clear all sample FIFO if the controller is disabled or | 
|  | * wait for a full PWM cycle to get a relinquished FIFO slot | 
|  | * when the controller is enabled and the FIFO is fully loaded. | 
|  | */ | 
|  | if (enable) { | 
|  | sr = readl(imx->mmio_base + MX3_PWMSR); | 
|  | fifoav = sr & MX3_PWMSR_FIFOAV_MASK; | 
|  | if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) { | 
|  | period_ms = DIV_ROUND_UP(pwm_get_period(pwm), | 
|  | NSEC_PER_MSEC); | 
|  | msleep(period_ms); | 
|  |  | 
|  | sr = readl(imx->mmio_base + MX3_PWMSR); | 
|  | if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK)) | 
|  | dev_warn(dev, "there is no free FIFO slot\n"); | 
|  | } | 
|  | } else { | 
|  | writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR); | 
|  | do { | 
|  | usleep_range(200, 1000); | 
|  | cr = readl(imx->mmio_base + MX3_PWMCR); | 
|  | } while ((cr & MX3_PWMCR_SWR) && | 
|  | (wait_count++ < MX3_PWM_SWR_LOOP)); | 
|  |  | 
|  | if (cr & MX3_PWMCR_SWR) | 
|  | dev_warn(dev, "software reset timeout\n"); | 
|  | } | 
|  |  | 
|  | c = clk_get_rate(imx->clk_per); | 
|  | c = c * period_ns; | 
|  | do_div(c, 1000000000); | 
|  | period_cycles = c; | 
|  |  | 
|  | prescale = period_cycles / 0x10000 + 1; | 
|  |  | 
|  | period_cycles /= prescale; | 
|  | c = (unsigned long long)period_cycles * duty_ns; | 
|  | do_div(c, period_ns); | 
|  | duty_cycles = c; | 
|  |  | 
|  | /* | 
|  | * according to imx pwm RM, the real period value should be | 
|  | * PERIOD value in PWMPR plus 2. | 
|  | */ | 
|  | if (period_cycles > 2) | 
|  | period_cycles -= 2; | 
|  | else | 
|  | period_cycles = 0; | 
|  |  | 
|  | writel(duty_cycles, imx->mmio_base + MX3_PWMSAR); | 
|  | writel(period_cycles, imx->mmio_base + MX3_PWMPR); | 
|  |  | 
|  | cr = MX3_PWMCR_PRESCALER(prescale) | | 
|  | MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | | 
|  | MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; | 
|  |  | 
|  | if (enable) | 
|  | cr |= MX3_PWMCR_EN; | 
|  |  | 
|  | writel(cr, imx->mmio_base + MX3_PWMCR); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  | u32 val; | 
|  |  | 
|  | val = readl(imx->mmio_base + MX3_PWMCR); | 
|  |  | 
|  | if (enable) | 
|  | val |= MX3_PWMCR_EN; | 
|  | else | 
|  | val &= ~MX3_PWMCR_EN; | 
|  |  | 
|  | writel(val, imx->mmio_base + MX3_PWMCR); | 
|  | } | 
|  |  | 
|  | static int imx_pwm_config(struct pwm_chip *chip, | 
|  | struct pwm_device *pwm, int duty_ns, int period_ns) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  | int ret; | 
|  |  | 
|  | ret = clk_prepare_enable(imx->clk_ipg); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = imx->config(chip, pwm, duty_ns, period_ns); | 
|  |  | 
|  | clk_disable_unprepare(imx->clk_ipg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  | int ret; | 
|  |  | 
|  | ret = clk_prepare_enable(imx->clk_per); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | imx->set_enable(chip, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) | 
|  | { | 
|  | struct imx_chip *imx = to_imx_chip(chip); | 
|  |  | 
|  | imx->set_enable(chip, false); | 
|  |  | 
|  | clk_disable_unprepare(imx->clk_per); | 
|  | } | 
|  |  | 
|  | static struct pwm_ops imx_pwm_ops = { | 
|  | .enable = imx_pwm_enable, | 
|  | .disable = imx_pwm_disable, | 
|  | .config = imx_pwm_config, | 
|  | .owner = THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | struct imx_pwm_data { | 
|  | int (*config)(struct pwm_chip *chip, | 
|  | struct pwm_device *pwm, int duty_ns, int period_ns); | 
|  | void (*set_enable)(struct pwm_chip *chip, bool enable); | 
|  | }; | 
|  |  | 
|  | static struct imx_pwm_data imx_pwm_data_v1 = { | 
|  | .config = imx_pwm_config_v1, | 
|  | .set_enable = imx_pwm_set_enable_v1, | 
|  | }; | 
|  |  | 
|  | static struct imx_pwm_data imx_pwm_data_v2 = { | 
|  | .config = imx_pwm_config_v2, | 
|  | .set_enable = imx_pwm_set_enable_v2, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id imx_pwm_dt_ids[] = { | 
|  | { .compatible = "fsl,imx1-pwm", .data = &imx_pwm_data_v1, }, | 
|  | { .compatible = "fsl,imx27-pwm", .data = &imx_pwm_data_v2, }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, imx_pwm_dt_ids); | 
|  |  | 
|  | static int imx_pwm_probe(struct platform_device *pdev) | 
|  | { | 
|  | const struct of_device_id *of_id = | 
|  | of_match_device(imx_pwm_dt_ids, &pdev->dev); | 
|  | const struct imx_pwm_data *data; | 
|  | struct imx_chip *imx; | 
|  | struct resource *r; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!of_id) | 
|  | return -ENODEV; | 
|  |  | 
|  | imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL); | 
|  | if (imx == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | imx->clk_per = devm_clk_get(&pdev->dev, "per"); | 
|  | if (IS_ERR(imx->clk_per)) { | 
|  | dev_err(&pdev->dev, "getting per clock failed with %ld\n", | 
|  | PTR_ERR(imx->clk_per)); | 
|  | return PTR_ERR(imx->clk_per); | 
|  | } | 
|  |  | 
|  | imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); | 
|  | if (IS_ERR(imx->clk_ipg)) { | 
|  | dev_err(&pdev->dev, "getting ipg clock failed with %ld\n", | 
|  | PTR_ERR(imx->clk_ipg)); | 
|  | return PTR_ERR(imx->clk_ipg); | 
|  | } | 
|  |  | 
|  | imx->chip.ops = &imx_pwm_ops; | 
|  | imx->chip.dev = &pdev->dev; | 
|  | imx->chip.base = -1; | 
|  | imx->chip.npwm = 1; | 
|  | imx->chip.can_sleep = true; | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | imx->mmio_base = devm_ioremap_resource(&pdev->dev, r); | 
|  | if (IS_ERR(imx->mmio_base)) | 
|  | return PTR_ERR(imx->mmio_base); | 
|  |  | 
|  | data = of_id->data; | 
|  | imx->config = data->config; | 
|  | imx->set_enable = data->set_enable; | 
|  |  | 
|  | ret = pwmchip_add(&imx->chip); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | platform_set_drvdata(pdev, imx); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int imx_pwm_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct imx_chip *imx; | 
|  |  | 
|  | imx = platform_get_drvdata(pdev); | 
|  | if (imx == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | return pwmchip_remove(&imx->chip); | 
|  | } | 
|  |  | 
|  | static struct platform_driver imx_pwm_driver = { | 
|  | .driver		= { | 
|  | .name	= "imx-pwm", | 
|  | .of_match_table = imx_pwm_dt_ids, | 
|  | }, | 
|  | .probe		= imx_pwm_probe, | 
|  | .remove		= imx_pwm_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(imx_pwm_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |