| # |
| # Configuration file for Laptop Mode Tools module lcd-brightness. |
| # |
| # For more information, consult the laptop-mode.conf(8) manual page. |
| # |
| |
| |
| ############################################################################### |
| # LCD brightness settings |
| # ----------------------- |
| # |
| # Using these settings, you can make laptop mode tools automatically adjust |
| # your LCD's brightness settings. The settings are extremely simple -- they |
| # only allow for the execution of a command, nothing more. The reason for this |
| # is that LCD brightness settings are very different between laptop vendors. |
| # |
| # Suggestions for commands: |
| # |
| # * If your system has the file "/proc/acpi/video/VID/LCD/brightness" (VID may |
| # be VID1 or similar), use this file as BRIGHTNESS_OUTPUT, and use |
| # the command "echo <value>". The possible values can be listed using the |
| # command: |
| # |
| # cat /proc/acpi/video/VID/LCD/brightness |
| # |
| # * If you have a file /sys/class/backlight/.../brightness, then you can use |
| # that file as BRIGHTNESS_OUTPUT, and the command "echo <value>". |
| # |
| # As far as I understand it the values are between 0 and |
| # the value contained in the file /sys/class/backlight/.../max_brightness. |
| # |
| # * For Toshiba laptops, use the command "toshset" with the -lcd or -inten |
| # command. Read the toshset(1) manual page for more information on the |
| # parameters for this command. If you use this command, set |
| # BRIGHTNESS_OUTPUT to "/dev/null". |
| # |
| ############################################################################### |
| |
| ############################################################################### |
| # |
| # IMPORTANT: In versions 1.36 and earlier, these settings were included in the |
| # main laptop-mode.conf configuration file. If they are still present, they |
| # overrule the settings in this file. To fix this, simply delete the settings |
| # from the main config file. |
| # |
| ############################################################################### |
| |
| # Enable debug mode for this module |
| # Set to 1 if you want to debug this module |
| DEBUG=0 |
| |
| # |
| # Should laptop mode tools control LCD brightness? |
| # |
| CONTROL_BRIGHTNESS=0 |
| |
| |
| # |
| # Commands to execute to set the brightness on your LCD |
| # |
| BATT_BRIGHTNESS_COMMAND="echo [value]" |
| LM_AC_BRIGHTNESS_COMMAND="echo [value]" |
| NOLM_AC_BRIGHTNESS_COMMAND="echo [value]" |
| BRIGHTNESS_OUTPUT="/proc/acpi/video/VID/LCD/brightness" |