| 0.5.0 (2014-05-06) |
| ------------------ |
| |
| * Update sigrok-cli to the new APIs from both libsigrok 0.3.0 and also |
| libsigrokdecode 0.3.0. |
| * Add support for the new channel groups feature in libsigrok. |
| * Report channel groups (drivers) and annotation rows (PDs) in --show. |
| * The protocol decoder output verbosity now depends on the --loglevel used. |
| * Only show the longest annotation per default if multiple are provided by |
| the PD. Higher numbers for the -l option will show them all. |
| * Allow both hex and decimal numbers as values for command-line options. |
| * Add support for an explicit "sigrok" file format option that can be |
| used with --input-format or --output-format (bug #131). |
| * If no PD annotation class is specified, default to showing all (bug #149). |
| * Fix an issue when running decoders with optional channels (bug #138). |
| * Report possible PD option values in --show output (bug #330). |
| * Allow saving of output in continuous mode (bug #122). |
| * Add support for libsigrok's SR_T_DOUBLE_RANGE config key (bug #335). |
| * Add support for config keys of type G_VARIANT_TYPE_INT32. |
| * Fix a bug which involved trying to save a file containing no data. |
| * Fix an internal probe ordering issue (bug #268). |
| * Fix various memory leak issues (bug #134, others). |
| * Fix a bug causing samplerates in session files being zero (bug #340). |
| * Fix segfault during analog acquisition without '-O analog' (bugs #90, #105). |
| * Fix a compile issue when building without libsigrokdecode (bug #351). |
| * Command line option changes: |
| - Add the -g|--channel-group option. |
| - Add the -M option (for PD meta output type support). |
| - Add the -B option (for PD binary output type support). |
| - Rename the -p|--probes option to -C|--channels. |
| * Various improvements to the NSIS file for better Windows installer support. |
| - Ship (redistributable) firmware files in the Windows installer. |
| - Ship libusb0.dll in the Windows installer (bug #243). |
| - Ship zadig.exe and zadig_xp.exe in the Windows installer. |
| - Ship all sample files from sigrok-dumps in the Windows installer. |
| - Don't ship/run the full Python MSI installer, only the required files. |
| - Fix a working directory issue in the installer. |
| * Build system: |
| - Use a non-recursive automake setup (fewer files, less clutter). |
| - configure output: Show which libs are required and which are optional. |
| * manpage: Various documentation updates. |
| |
| 0.4.0 (2013-05-04) |
| ------------------ |
| |
| * Update sigrok-cli to the new APIs from both libsigrok 0.2.0 and also |
| libsigrokdecode 0.2.0. |
| * Add support for handling analog data sources (DMMs, scopes, dataloggers). |
| * Bugfix in the handling of -A options with arguments. |
| * Updated build dependencies list. |
| - glib (required): Now must be >= 2.28.0. |
| - libsigrok (required): Now must be >= 0.2.0. |
| - libsigrokdecode (required): Now must be >= 0.2.0. |
| * Add support for specifying input format options. |
| * Probe numbers now generally start at 0 (not 1). |
| * Command line option changes: |
| - The -D|--list-devices option was renamed to --scan. |
| - The -d|--device option was renamed to -c|--config. |
| - The -a|--protocol-decoders option was renamed to -P|--protocol-decoders. |
| - The -s|--protocol-decoder-stack option was renamed to |
| -S|--protocol-decoder-stack. |
| - Added a --driver option to specify which libsigrok driver is to be used. |
| - Added a --show option. This can show details about drivers or PDs. |
| - Added a --frames option which limits the number of frames to get from |
| a supported oscilloscope (or other frame-based device). |
| * Various documentation updates (README, manpage, and so on). |
| * configure: Don't overwrite CFLAGS, but rather amend it. |
| |
| 0.3.1 (2012-05-30) |
| ------------------ |
| |
| * Add a ChangeLog file to the tarball. |
| * -V option: If "-l 3" or higher is used, the PD description is shown, too. |
| * -a option: Print optional/required PD probes. Example: sigrok-cli -a uart. |
| * Fix compiling with "Homebrew" (Mac OS X). |
| * Stacking order doesn't have to be specified if it's the same as the |
| PD list. Example: sigrok-cli -i <file.sr> -a i2c,edid -s i2c,edid. |
| The -s option is no longer required in this special case. |
| * Only output module or PD output goes to stdout, everything else to stderr. |
| * Improved error handling: Stop sigrok-cli upon various PD related errors. |
| * New -A | --protocol-decoder-annotations option which allows the user to |
| select which annotation types (and from which PD in the stack) to show. |
| * Update the manpage. |
| * Fix a Makefile.am bug which caused the generated ChangeLog files being |
| accidentally deleted upon 'make distclean'. |
| |
| 0.3.0 (2012-04-17) |
| ------------------ |
| |
| * New major version, now depends on libsigrok and libsigrokdecode. |
| * Initial support for protocol decoders (written in Python >= 3). |
| Supports streaming processing, and stacking of protocol decoders. |
| Currently supported: dcf77, mx25lxx05d, i2s, spi, edid, pan1321, mlx90614, |
| rtc8564, transitioncounter, usb, i2cdemux, i2c, i2cfilter, uart. |
| * Add support for the ChronoVu LA8 logic analyzer. |
| * Add support for the ChronoVu LA8 input- and output-formats. |
| * Add support for the CSV output format. |
| * New CLI options: --loglevel, --input-format, --protocol-decoders, and |
| --protocol-decoder-stack. |
| * Changed CLI options: Rename -f|--format to -O|--output-format. |
| * Demo driver: Add all-low and all-high pattern support. |
| * Saleae Logic driver: Initial support for multiple attached devices. |
| * OLS driver: Run-Length Encoding (RLE) support. |
| * Various portability fixes for Mac OS X and MinGW/Windows. |
| * Many bugfixes, improvements, and documentation updates. |
| |
| 0.2.0 (2011-04-03) |
| ------------------ |
| |
| This is mostly a bugfix release. |
| |
| * Fix session saving & input file loading, implement session loading support. |
| * Initial work on an NSIS-based Windows installer for sigrok. |
| * CLI: Change syntax for -d and -f to <thing>:key=value:key2=value2. |
| * Various bugfixes, internal code improvements, and documentation updates. |
| * Improve MinGW/Windows support in sigrok, fix various Windows issues. |
| * Improve Openbench Logic Sniffer output format support and add metadata |
| support (requires jawi's OLS client >= 0.9.4-rc1). |
| * Add FreeBSD support for sigrok. |
| * Add initial doxygen support (sigrok API documentation). |
| * ASIX SIGMA: Fix a firmware loading bug. |
| |
| 0.1.0 (2011-01-20) |
| ------------------ |
| |
| * Initial release. |
| |
