| # File: Makefile |
| # |
| # Copyright (C) 2008-2009, Marvell International Ltd. |
| # |
| # This software file (the "File") is distributed by Marvell International |
| # Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| # (the "License"). You may use, redistribute and/or modify this File in |
| # accordance with the terms and conditions of the License, a copy of which |
| # is available by writing to the Free Software Foundation, Inc., |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| # worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| # |
| # A copy of the GPL is available in file gpl-2.0.txt accompanying in this |
| # deliverables. |
| # |
| # THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| # ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| # this warranty disclaimer. |
| |
| CC= $(CROSS_COMPILE)gcc |
| LD= $(CROSS_COMPILE)ld |
| BACKUP= /root/backup |
| YMD= `date +%Y%m%d%H%M` |
| |
| ############################################################################# |
| # Configuration Options |
| ############################################################################# |
| |
| # Debug Option |
| # DEBUG LEVEL n/1/2: |
| # n: NO DEBUG |
| # 1: Only PRINTM(MMSG,...), PRINTM(MFATAL,...), ... |
| # 2: All PRINTM() |
| CONFIG_DEBUG=1 |
| |
| # Proc debug file |
| CONFIG_PROC_DEBUG=y |
| |
| # Re-association in driver |
| CONFIG_REASSOCIATION=y |
| |
| # Manufacturing firmware support |
| CONFIG_MFG_CMD_SUPPORT=y |
| |
| # Big-endian platform |
| CONFIG_BIG_ENDIAN=n |
| |
| # Enable SDIO multi-port Tx aggregation |
| CONFIG_SDIO_MULTI_PORT_TX_AGGR=y |
| |
| # Enable SDIO multi-port Rx aggregation |
| CONFIG_SDIO_MULTI_PORT_RX_AGGR=y |
| |
| |
| ############################################################################# |
| # Select Platform Tools |
| ############################################################################# |
| |
| MODEXT = ko |
| #EXTRA_CFLAGS += -I$(PWD)/mlan |
| EXTRA_CFLAGS += -I$(M)/mlan |
| EXTRA_CFLAGS += -DLINUX |
| |
| # KERNELDIR point to the installed kernel directory. |
| # KERNELDIR can be set on the command line, |
| # make KERNELDIR=/usr/src/arm/<arch-bsp-path> |
| # Alternatively KERNELDIR can be set in the environment. |
| # Default value for KERNELDIR is set below. |
| KERNELDIR ?= /usr/src/arm/linux-2.6.25-pxa9xx |
| |
| # CROSS_COMPILE specify the prefix used for all executables used |
| # during compilation. Only gcc and related bin-utils executables |
| # CROSS_COMPILE can be set on the command line |
| # make CROSS_COMPILE=</usr/local/arm/4.1.1/bin/>arm-linux- |
| # Alternatively CROSS_COMPILE can be set in the environment. |
| # Default value for CROSS_COMPILE is set below. |
| CROSS_COMPILE ?= /usr/local/arm/4.1.1/bin/arm-linux- |
| |
| # INSTALLDIR specify the path to install the kernel module after |
| # succesful compilation. |
| # INSTALLDIR can be set on the command line |
| # make INSTALLDIR=/tftpboot/<rootfs> |
| # Alternatively INSTALLDIR can be set in the environment. |
| # Default value for INSTALL is set below. |
| INSTALLDIR ?= /tftpboot/pxa9xx/root |
| |
| # ARCH specifies the architecture of the target processor, this kernel |
| # module will run. |
| # ARCH can be set on the command line |
| # make ARCH=<arm/i386> |
| # Alternatively ARCH can be set in the environment |
| # Default values of ARCH for specific platform are set below. |
| ARCH ?= arm |
| |
| LD += -S |
| BINDIR = ../bin_sd8787 |
| |
| ############################################################################# |
| # Compiler Flags |
| ############################################################################# |
| |
| EXTRA_CFLAGS += -I$(KERNELDIR)/include |
| |
| EXTRA_CFLAGS += -DFPNUM='"64"' |
| |
| ifeq ($(CONFIG_DEBUG),1) |
| EXTRA_CFLAGS += -DDEBUG_LEVEL1 |
| endif |
| |
| ifeq ($(CONFIG_DEBUG),2) |
| EXTRA_CFLAGS += -DDEBUG_LEVEL1 |
| EXTRA_CFLAGS += -DDEBUG_LEVEL2 |
| DBG= -dbg |
| endif |
| |
| ifeq ($(CONFIG_PROC_DEBUG),y) |
| EXTRA_CFLAGS += -DPROC_DEBUG |
| export CONFIG_PROC_DEBUG |
| endif |
| |
| ifeq ($(CONFIG_REASSOCIATION),y) |
| EXTRA_CFLAGS += -DREASSOCIATION |
| endif |
| |
| ifeq ($(CONFIG_MFG_CMD_SUPPORT),y) |
| EXTRA_CFLAGS += -DMFG_CMD_SUPPORT |
| endif |
| |
| ifeq ($(CONFIG_BIG_ENDIAN),y) |
| EXTRA_CFLAGS += -DBIG_ENDIAN |
| endif |
| |
| ifeq ($(CONFIG_SDIO_MULTI_PORT_TX_AGGR),y) |
| EXTRA_CFLAGS += -DSDIO_MULTI_PORT_TX_AGGR |
| endif |
| |
| ifeq ($(CONFIG_SDIO_MULTI_PORT_RX_AGGR),y) |
| EXTRA_CFLAGS += -DSDIO_MULTI_PORT_RX_AGGR |
| endif |
| |
| |
| ############################################################################# |
| # Make Targets |
| ############################################################################# |
| |
| ifneq ($(KERNELRELEASE),) |
| |
| MOALOBJS = mlinux/moal_main.o \ |
| mlinux/moal_ioctl.o \ |
| mlinux/moal_shim.o |
| |
| MLANOBJS = mlan/mlan_shim.o mlan/mlan_init.o \ |
| mlan/mlan_txrx.o \ |
| mlan/mlan_cmdevt.o mlan/mlan_misc.o \ |
| mlan/mlan_module.o |
| |
| MLANOBJS += mlan/mlan_wmm.o |
| MLANOBJS += mlan/mlan_sdio.o |
| MLANOBJS += mlan/mlan_11n_aggr.o |
| MLANOBJS += mlan/mlan_11n_rxreorder.o |
| MLANOBJS += mlan/mlan_11n.o |
| MLANOBJS += mlan/mlan_11d.o |
| MLANOBJS += mlan/mlan_scan.o |
| MLANOBJS += mlan/mlan_join.o |
| MLANOBJS += mlan/mlan_cfp.o \ |
| mlan/mlan_sta_ioctl.o \ |
| mlan/mlan_sta_rx.o \ |
| mlan/mlan_sta_tx.o \ |
| mlan/mlan_sta_event.o \ |
| mlan/mlan_sta_cmd.o \ |
| mlan/mlan_sta_cmdresp.o |
| MOALOBJS += mlinux/moal_priv.o \ |
| mlinux/moal_wext.o |
| MLANOBJS += mlan/mlan_11h.o |
| MLANOBJS += mlan/mlan_meas.o |
| |
| |
| ifdef CONFIG_PROC_FS |
| MOALOBJS += mlinux/moal_proc.o |
| ifeq ($(CONFIG_PROC_DEBUG),y) |
| MOALOBJS += mlinux/moal_debug.o |
| endif |
| endif |
| |
| obj-m := mlan.o |
| mlan-objs := $(MLANOBJS) |
| MOALOBJS += mlinux/moal_sdio_mmc.o |
| obj-m += sd8xxx.o |
| sd8xxx-objs := $(MOALOBJS) |
| |
| |
| # Otherwise we were called directly from the command line; invoke the kernel build system. |
| else |
| |
| default: |
| $(MAKE) -C $(KERNELDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules |
| |
| endif |
| |
| ############################################################### |
| |
| export CC LD EXTRA_CFLAGS KERNELDIR |
| |
| .PHONY: mapp/mlanconfig mapp/mlan2040coex clean distclean |
| @echo "Finished Making Marvell Wlan Linux Driver" |
| |
| mapp/mlanconfig: |
| $(MAKE) -C $@ |
| mapp/mlan2040coex: |
| $(MAKE) -C $@ |
| |
| echo: |
| |
| build: echo default |
| |
| @if [ ! -d $(BINDIR) ]; then \ |
| mkdir $(BINDIR); \ |
| fi |
| cp -f mlan.$(MODEXT) $(BINDIR)/mlan$(DBG).$(MODEXT) |
| cp -f sd8xxx.$(MODEXT) $(BINDIR)/sd8787$(DBG).$(MODEXT) |
| |
| cp -f README $(BINDIR) |
| $(MAKE) -C mapp/mlanconfig $@ INSTALLDIR=$(BINDIR) |
| $(MAKE) -C mapp/mlan2040coex $@ INSTALLDIR=$(BINDIR) |
| |
| clean: |
| -find . -name "*.o" -exec rm {} \; |
| -find . -name "*.ko" -exec rm {} \; |
| -find . -name ".*.cmd" -exec rm {} \; |
| -find . -name "*.mod.c" -exec rm {} \; |
| -find . -name "Module.symvers" -exec rm {} \; |
| -find . -name "Module.markers" -exec rm {} \; |
| -find . -name "modules.order" -exec rm {} \; |
| -rm -rf .tmp_versions |
| $(MAKE) -C mapp/mlanconfig $@ |
| $(MAKE) -C mapp/mlan2040coex $@ |
| |
| install: default |
| |
| cp -f mlan.$(MODEXT) $(INSTALLDIR)/mlan$(DBG).$(MODEXT) |
| cp -f sd8xxx.$(MODEXT) $(INSTALLDIR)/sd8787$(DBG).$(MODEXT) |
| echo "sd8787 Driver Installed" |
| |
| distclean: |
| -find . -name "*.o" -exec rm {} \; |
| -find . -name "*.orig" -exec rm {} \; |
| -find . -name "*.swp" -exec rm {} \; |
| -find . -name "*.*~" -exec rm {} \; |
| -find . -name "*~" -exec rm {} \; |
| -find . -name "*.d" -exec rm {} \; |
| -find . -name "*.a" -exec rm {} \; |
| -find . -name "tags" -exec rm {} \; |
| -find . -name ".*" -exec rm -rf 2> /dev/null \; |
| -find . -name "*.ko" -exec rm {} \; |
| -find . -name ".*.cmd" -exec rm {} \; |
| -find . -name "*.mod.c" -exec rm {} \; |
| -rm -rf .tmp_versions |
| $(MAKE) -C mapp/mlanconfig $@ |
| $(MAKE) -C mapp/mlan2040coex $@ |
| |
| # End of file |