| /* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ |
| /* |
| * mmcli -- Control modem status & access information from the command line |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * Copyright (C) 2011-2018 Aleksander Morgado <aleksander@aleksander.es> |
| */ |
| |
| #include "config.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <locale.h> |
| |
| #include <glib.h> |
| #include <gio/gio.h> |
| |
| #define _LIBMM_INSIDE_MMCLI |
| #include <libmm-glib.h> |
| |
| #include "mmcli.h" |
| #include "mmcli-common.h" |
| #include "mmcli-output.h" |
| |
| /* Context */ |
| typedef struct { |
| GDBusConnection *connection; |
| MMManager *manager; |
| GCancellable *cancellable; |
| MMObject *object; |
| MMModem *modem; |
| MMModem3gpp *modem_3gpp; |
| MMModemCdma *modem_cdma; |
| } Context; |
| static Context *ctx; |
| |
| /* Options */ |
| static gboolean info_flag; /* set when no action found */ |
| static gboolean monitor_state_flag; |
| static gboolean enable_flag; |
| static gboolean disable_flag; |
| static gboolean set_power_state_on_flag; |
| static gboolean set_power_state_low_flag; |
| static gboolean set_power_state_off_flag; |
| static gboolean reset_flag; |
| static gchar *factory_reset_str; |
| static gchar *command_str; |
| static gchar *create_bearer_str; |
| static gchar *delete_bearer_str; |
| static gchar *set_current_capabilities_str; |
| static gchar *set_allowed_modes_str; |
| static gchar *set_preferred_mode_str; |
| static gchar *set_current_bands_str; |
| static gboolean inhibit_flag; |
| |
| static GOptionEntry entries[] = { |
| { "monitor-state", 'w', 0, G_OPTION_ARG_NONE, &monitor_state_flag, |
| "Monitor state of a given modem", |
| NULL |
| }, |
| { "enable", 'e', 0, G_OPTION_ARG_NONE, &enable_flag, |
| "Enable a given modem", |
| NULL |
| }, |
| { "disable", 'd', 0, G_OPTION_ARG_NONE, &disable_flag, |
| "Disable a given modem", |
| NULL |
| }, |
| { "set-power-state-on", 0, 0, G_OPTION_ARG_NONE, &set_power_state_on_flag, |
| "Set full power state in the modem", |
| NULL |
| }, |
| { "set-power-state-low", 0, 0, G_OPTION_ARG_NONE, &set_power_state_low_flag, |
| "Set low power state in the modem", |
| NULL |
| }, |
| { "set-power-state-off", 0, 0, G_OPTION_ARG_NONE, &set_power_state_off_flag, |
| "Power off the modem", |
| NULL |
| }, |
| { "reset", 'r', 0, G_OPTION_ARG_NONE, &reset_flag, |
| "Reset a given modem", |
| NULL |
| }, |
| { "factory-reset", 0, 0, G_OPTION_ARG_STRING, &factory_reset_str, |
| "Reset a given modem to its factory state", |
| "[CODE]" |
| }, |
| { "command", 0, 0, G_OPTION_ARG_STRING, &command_str, |
| "Send an AT command to the modem", |
| "[COMMAND]" |
| }, |
| { "create-bearer", 0, 0, G_OPTION_ARG_STRING, &create_bearer_str, |
| "Create a new packet data bearer in a given modem", |
| "[\"key=value,...\"]" |
| }, |
| { "delete-bearer", 0, 0, G_OPTION_ARG_STRING, &delete_bearer_str, |
| "Delete a data bearer from a given modem", |
| "[PATH|INDEX]" |
| }, |
| { "set-current-capabilities", 0, 0, G_OPTION_ARG_STRING, &set_current_capabilities_str, |
| "Set current modem capabilities.", |
| "[CAPABILITY1|CAPABILITY2...]" |
| }, |
| { "set-allowed-modes", 0, 0, G_OPTION_ARG_STRING, &set_allowed_modes_str, |
| "Set allowed modes in a given modem.", |
| "[MODE1|MODE2...]" |
| }, |
| { "set-preferred-mode", 0, 0, G_OPTION_ARG_STRING, &set_preferred_mode_str, |
| "Set preferred mode in a given modem (Must give allowed modes with --set-allowed-modes)", |
| "[MODE]" |
| }, |
| { "set-current-bands", 0, 0, G_OPTION_ARG_STRING, &set_current_bands_str, |
| "Set bands to be used by a given modem.", |
| "[BAND1|BAND2...]" |
| }, |
| { "inhibit", 0, 0, G_OPTION_ARG_NONE, &inhibit_flag, |
| "Inhibit the modem", |
| NULL |
| }, |
| { NULL } |
| }; |
| |
| GOptionGroup * |
| mmcli_modem_get_option_group (void) |
| { |
| GOptionGroup *group; |
| |
| /* Status options */ |
| group = g_option_group_new ("modem", |
| "Modem options", |
| "Show modem options", |
| NULL, |
| NULL); |
| g_option_group_add_entries (group, entries); |
| |
| return group; |
| } |
| |
| gboolean |
| mmcli_modem_options_enabled (void) |
| { |
| static guint n_actions = 0; |
| static gboolean checked = FALSE; |
| |
| if (checked) |
| return !!n_actions; |
| |
| n_actions = (monitor_state_flag + |
| enable_flag + |
| disable_flag + |
| set_power_state_on_flag + |
| set_power_state_low_flag + |
| set_power_state_off_flag + |
| reset_flag + |
| !!create_bearer_str + |
| !!delete_bearer_str + |
| !!factory_reset_str + |
| !!command_str + |
| !!set_current_capabilities_str + |
| !!set_allowed_modes_str + |
| !!set_preferred_mode_str + |
| !!set_current_bands_str + |
| inhibit_flag); |
| |
| if (n_actions == 0 && mmcli_get_common_modem_string ()) { |
| /* default to info */ |
| info_flag = TRUE; |
| n_actions++; |
| } |
| |
| if (set_preferred_mode_str) { |
| if (!set_allowed_modes_str) { |
| g_printerr ("error: setting preferred mode requires list of allowed modes\n"); |
| exit (EXIT_FAILURE); |
| } |
| n_actions--; |
| } |
| |
| if (n_actions > 1) { |
| g_printerr ("error: too many modem actions requested\n"); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (monitor_state_flag || inhibit_flag) |
| mmcli_force_async_operation (); |
| |
| if (info_flag) |
| mmcli_force_sync_operation (); |
| |
| checked = TRUE; |
| return !!n_actions; |
| } |
| |
| static void |
| context_free (Context *ctx) |
| { |
| if (!ctx) |
| return; |
| |
| if (ctx->cancellable) |
| g_object_unref (ctx->cancellable); |
| if (ctx->modem) |
| g_object_unref (ctx->modem); |
| if (ctx->modem_3gpp) |
| g_object_unref (ctx->modem_3gpp); |
| if (ctx->modem_cdma) |
| g_object_unref (ctx->modem_cdma); |
| if (ctx->object) |
| g_object_unref (ctx->object); |
| if (ctx->manager) |
| g_object_unref (ctx->manager); |
| if (ctx->connection) |
| g_object_unref (ctx->connection); |
| g_free (ctx); |
| } |
| |
| void |
| mmcli_modem_shutdown (void) |
| { |
| context_free (ctx); |
| } |
| |
| static void |
| inhibition_cancelled (GCancellable *cancellable, |
| const gchar *uid) |
| { |
| GError *error = NULL; |
| |
| if (!mm_manager_uninhibit_device_sync (ctx->manager, uid, NULL, &error)) { |
| g_printerr ("error: couldn't uninhibit device: '%s'\n", |
| error ? error->message : "unknown error"); |
| } else |
| g_print ("successfully uninhibited device with uid '%s'\n", uid); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| inhibit_device_ready (MMManager *manager, |
| GAsyncResult *result, |
| gchar *uid) |
| { |
| GError *error = NULL; |
| |
| if (!mm_manager_inhibit_device_finish (manager, result, &error)) { |
| g_printerr ("error: couldn't inhibit device: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully inhibited device with uid '%s'\n", uid); |
| g_print ("type Ctrl+C to abort this program and remove the inhibition\n"); |
| |
| g_cancellable_connect (ctx->cancellable, |
| G_CALLBACK (inhibition_cancelled), |
| uid, g_free); |
| } |
| |
| static void |
| cancelled (GCancellable *cancellable) |
| { |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| print_bearer_short_info (MMBearer *bearer) |
| { |
| g_print ("\t%s\n", |
| mm_bearer_get_path (bearer)); |
| } |
| |
| static void |
| print_modem_info (void) |
| { |
| gchar *supported_capabilities_string; |
| MMModemCapability *capabilities = NULL; |
| guint n_capabilities = 0; |
| gchar *current_capabilities_string; |
| gchar *access_technologies_string; |
| MMModemModeCombination *modes = NULL; |
| guint n_modes = 0; |
| gchar *supported_modes_string; |
| MMModemMode allowed_modes; |
| gchar *allowed_modes_string = NULL; |
| MMModemMode preferred_mode; |
| gchar *preferred_mode_string = NULL; |
| gchar *supported_bands_string; |
| gchar *current_bands_string; |
| gchar *supported_ip_families_string; |
| gchar *unlock_retries_string; |
| MMModemBand *bands = NULL; |
| guint n_bands = 0; |
| MMModemPortInfo *ports = NULL; |
| guint n_ports = 0; |
| gchar *ports_string; |
| MMUnlockRetries *unlock_retries; |
| guint signal_quality = 0; |
| gboolean signal_quality_recent = FALSE; |
| const gchar *sim_path; |
| const gchar **bearer_paths; |
| |
| /* Strings in heap */ |
| mm_modem_get_supported_capabilities (ctx->modem, &capabilities, &n_capabilities); |
| supported_capabilities_string = mm_common_build_capabilities_string (capabilities, n_capabilities); |
| g_free (capabilities); |
| current_capabilities_string = mm_modem_capability_build_string_from_mask ( |
| mm_modem_get_current_capabilities (ctx->modem)); |
| access_technologies_string = mm_modem_access_technology_build_string_from_mask ( |
| mm_modem_get_access_technologies (ctx->modem)); |
| mm_modem_get_supported_modes (ctx->modem, &modes, &n_modes); |
| supported_modes_string = mm_common_build_mode_combinations_string (modes, n_modes); |
| g_free (modes); |
| mm_modem_get_current_bands (ctx->modem, &bands, &n_bands); |
| current_bands_string = mm_common_build_bands_string (bands, n_bands); |
| g_free (bands); |
| mm_modem_get_supported_bands (ctx->modem, &bands, &n_bands); |
| supported_bands_string = mm_common_build_bands_string (bands, n_bands); |
| g_free (bands); |
| mm_modem_get_ports (ctx->modem, &ports, &n_ports); |
| ports_string = mm_common_build_ports_string (ports, n_ports); |
| mm_modem_port_info_array_free (ports, n_ports); |
| if (mm_modem_get_current_modes (ctx->modem, &allowed_modes, &preferred_mode)) { |
| allowed_modes_string = mm_modem_mode_build_string_from_mask (allowed_modes); |
| preferred_mode_string = mm_modem_mode_build_string_from_mask (preferred_mode); |
| } |
| supported_ip_families_string = mm_bearer_ip_family_build_string_from_mask ( |
| mm_modem_get_supported_ip_families (ctx->modem)); |
| |
| unlock_retries = mm_modem_get_unlock_retries (ctx->modem); |
| unlock_retries_string = mm_unlock_retries_build_string (unlock_retries); |
| g_object_unref (unlock_retries); |
| |
| signal_quality = mm_modem_get_signal_quality (ctx->modem, &signal_quality_recent); |
| |
| mmcli_output_string (MMC_F_GENERAL_DBUS_PATH, mm_modem_get_path (ctx->modem)); |
| mmcli_output_string (MMC_F_GENERAL_DEVICE_ID, mm_modem_get_device_identifier (ctx->modem)); |
| |
| mmcli_output_string (MMC_F_HARDWARE_MANUFACTURER, mm_modem_get_manufacturer (ctx->modem)); |
| mmcli_output_string (MMC_F_HARDWARE_MODEL, mm_modem_get_model (ctx->modem)); |
| mmcli_output_string (MMC_F_HARDWARE_REVISION, mm_modem_get_revision (ctx->modem)); |
| mmcli_output_string (MMC_F_HARDWARE_CARRIER_CONF, mm_modem_get_carrier_configuration (ctx->modem)); |
| mmcli_output_string (MMC_F_HARDWARE_CARRIER_CONF_REV, mm_modem_get_carrier_configuration_revision (ctx->modem)); |
| mmcli_output_string (MMC_F_HARDWARE_HW_REVISION, mm_modem_get_hardware_revision (ctx->modem)); |
| mmcli_output_string_multiline (MMC_F_HARDWARE_SUPPORTED_CAPABILITIES, supported_capabilities_string); |
| mmcli_output_string_multiline (MMC_F_HARDWARE_CURRENT_CAPABILITIES, current_capabilities_string); |
| mmcli_output_string (MMC_F_HARDWARE_EQUIPMENT_ID, mm_modem_get_equipment_identifier (ctx->modem)); |
| |
| mmcli_output_string (MMC_F_SYSTEM_DEVICE, mm_modem_get_device (ctx->modem)); |
| mmcli_output_string_array (MMC_F_SYSTEM_DRIVERS, (const gchar **) mm_modem_get_drivers (ctx->modem), FALSE); |
| mmcli_output_string (MMC_F_SYSTEM_PLUGIN, mm_modem_get_plugin (ctx->modem)); |
| mmcli_output_string (MMC_F_SYSTEM_PRIMARY_PORT, mm_modem_get_primary_port (ctx->modem)); |
| mmcli_output_string_list (MMC_F_SYSTEM_PORTS, ports_string); |
| |
| mmcli_output_string_array (MMC_F_NUMBERS_OWN, (const gchar **) mm_modem_get_own_numbers (ctx->modem), FALSE); |
| |
| mmcli_output_string (MMC_F_STATUS_LOCK, mm_modem_lock_get_string (mm_modem_get_unlock_required (ctx->modem))); |
| mmcli_output_string_list (MMC_F_STATUS_UNLOCK_RETRIES, unlock_retries_string); |
| mmcli_output_state (mm_modem_get_state (ctx->modem), mm_modem_get_state_failed_reason (ctx->modem)); |
| mmcli_output_string (MMC_F_STATUS_POWER_STATE, mm_modem_power_state_get_string (mm_modem_get_power_state (ctx->modem))); |
| mmcli_output_string_list (MMC_F_STATUS_ACCESS_TECH, access_technologies_string); |
| mmcli_output_signal_quality (signal_quality, signal_quality_recent); |
| |
| mmcli_output_string_multiline (MMC_F_MODES_SUPPORTED, supported_modes_string); |
| mmcli_output_string_take (MMC_F_MODES_CURRENT, g_strdup_printf ("allowed: %s; preferred: %s", |
| allowed_modes_string, preferred_mode_string)); |
| |
| mmcli_output_string_list (MMC_F_BANDS_SUPPORTED, supported_bands_string); |
| mmcli_output_string_list (MMC_F_BANDS_CURRENT, current_bands_string); |
| |
| mmcli_output_string_list (MMC_F_IP_SUPPORTED, supported_ip_families_string); |
| |
| /* 3GPP */ |
| { |
| const gchar *imei = NULL; |
| gchar *facility_locks = NULL; |
| const gchar *operator_code = NULL; |
| const gchar *operator_name = NULL; |
| const gchar *registration = NULL; |
| const gchar *eps_ue_mode = NULL; |
| GList *pco_list = NULL; |
| const gchar *initial_eps_bearer_path = NULL; |
| const gchar *initial_eps_bearer_apn = NULL; |
| gchar *initial_eps_bearer_ip_family_str = NULL; |
| const gchar *initial_eps_bearer_user = NULL; |
| const gchar *initial_eps_bearer_password = NULL; |
| |
| if (ctx->modem_3gpp) { |
| imei = mm_modem_3gpp_get_imei (ctx->modem_3gpp); |
| facility_locks = mm_modem_3gpp_facility_build_string_from_mask (mm_modem_3gpp_get_enabled_facility_locks (ctx->modem_3gpp)); |
| operator_code = mm_modem_3gpp_get_operator_code (ctx->modem_3gpp); |
| operator_name = mm_modem_3gpp_get_operator_name (ctx->modem_3gpp); |
| registration = mm_modem_3gpp_registration_state_get_string (mm_modem_3gpp_get_registration_state (ctx->modem_3gpp)); |
| eps_ue_mode = mm_modem_3gpp_eps_ue_mode_operation_get_string (mm_modem_3gpp_get_eps_ue_mode_operation (ctx->modem_3gpp)); |
| pco_list = mm_modem_3gpp_get_pco (ctx->modem_3gpp); |
| initial_eps_bearer_path = mm_modem_3gpp_get_initial_eps_bearer_path (ctx->modem_3gpp); |
| |
| if (mm_modem_get_current_capabilities (ctx->modem) & (MM_MODEM_CAPABILITY_LTE | MM_MODEM_CAPABILITY_LTE_ADVANCED)) { |
| MMBearerProperties *initial_eps_bearer_properties; |
| |
| initial_eps_bearer_properties = mm_modem_3gpp_peek_initial_eps_bearer_settings (ctx->modem_3gpp); |
| if (initial_eps_bearer_properties) { |
| initial_eps_bearer_apn = mm_bearer_properties_get_apn (initial_eps_bearer_properties); |
| initial_eps_bearer_ip_family_str = mm_bearer_ip_family_build_string_from_mask (mm_bearer_properties_get_ip_type (initial_eps_bearer_properties)); |
| initial_eps_bearer_user = mm_bearer_properties_get_user (initial_eps_bearer_properties); |
| initial_eps_bearer_password = mm_bearer_properties_get_password (initial_eps_bearer_properties); |
| } |
| } |
| } |
| |
| mmcli_output_string (MMC_F_3GPP_IMEI, imei); |
| mmcli_output_string_list (MMC_F_3GPP_ENABLED_LOCKS, facility_locks); |
| mmcli_output_string (MMC_F_3GPP_OPERATOR_ID, operator_code); |
| mmcli_output_string (MMC_F_3GPP_OPERATOR_NAME, operator_name); |
| mmcli_output_string (MMC_F_3GPP_REGISTRATION, registration); |
| mmcli_output_string (MMC_F_3GPP_EPS_UE_MODE, eps_ue_mode); |
| mmcli_output_string (MMC_F_3GPP_EPS_INITIAL_BEARER_PATH, g_strcmp0 (initial_eps_bearer_path, "/") != 0 ? initial_eps_bearer_path : NULL); |
| mmcli_output_string (MMC_F_3GPP_EPS_BEARER_SETTINGS_APN, initial_eps_bearer_apn); |
| mmcli_output_string_take (MMC_F_3GPP_EPS_BEARER_SETTINGS_IP_TYPE, initial_eps_bearer_ip_family_str); |
| mmcli_output_string (MMC_F_3GPP_EPS_BEARER_SETTINGS_USER, initial_eps_bearer_user); |
| mmcli_output_string (MMC_F_3GPP_EPS_BEARER_SETTINGS_PASSWORD, initial_eps_bearer_password); |
| mmcli_output_pco_list (pco_list); |
| |
| g_free (facility_locks); |
| mm_pco_list_free (pco_list); |
| } |
| |
| /* CDMA */ |
| { |
| const gchar *meid = NULL; |
| const gchar *esn = NULL; |
| gchar *sid = NULL; |
| gchar *nid = NULL; |
| const gchar *registration_cdma1x = NULL; |
| const gchar *registration_evdo = NULL; |
| const gchar *activation = NULL; |
| |
| if (ctx->modem_cdma) { |
| guint sid_n; |
| guint nid_n; |
| |
| meid = mm_modem_cdma_get_meid (ctx->modem_cdma); |
| esn = mm_modem_cdma_get_esn (ctx->modem_cdma); |
| sid_n = mm_modem_cdma_get_sid (ctx->modem_cdma); |
| if (sid_n != MM_MODEM_CDMA_SID_UNKNOWN) |
| sid = g_strdup_printf ("%u", sid_n); |
| nid_n = mm_modem_cdma_get_nid (ctx->modem_cdma); |
| if (nid_n != MM_MODEM_CDMA_NID_UNKNOWN) |
| nid = g_strdup_printf ("%u", nid_n); |
| registration_cdma1x = mm_modem_cdma_registration_state_get_string (mm_modem_cdma_get_cdma1x_registration_state (ctx->modem_cdma)); |
| registration_evdo = mm_modem_cdma_registration_state_get_string (mm_modem_cdma_get_evdo_registration_state (ctx->modem_cdma)); |
| activation = mm_modem_cdma_activation_state_get_string (mm_modem_cdma_get_activation_state (ctx->modem_cdma)); |
| } |
| |
| mmcli_output_string (MMC_F_CDMA_MEID, meid); |
| mmcli_output_string (MMC_F_CDMA_ESN, esn); |
| mmcli_output_string_take (MMC_F_CDMA_SID, sid); |
| mmcli_output_string_take (MMC_F_CDMA_NID, nid); |
| mmcli_output_string (MMC_F_CDMA_REGISTRATION_CDMA1X, registration_cdma1x); |
| mmcli_output_string (MMC_F_CDMA_REGISTRATION_EVDO, registration_evdo); |
| mmcli_output_string (MMC_F_CDMA_ACTIVATION, activation); |
| } |
| |
| sim_path = mm_modem_get_sim_path (ctx->modem); |
| mmcli_output_string (MMC_F_SIM_PATH, g_strcmp0 (sim_path, "/") != 0 ? sim_path : NULL); |
| |
| bearer_paths = (const gchar **) mm_modem_get_bearer_paths (ctx->modem); |
| mmcli_output_string_array (MMC_F_BEARER_PATHS, (bearer_paths && bearer_paths[0]) ? bearer_paths : NULL, TRUE); |
| |
| mmcli_output_dump (); |
| |
| g_free (ports_string); |
| g_free (supported_ip_families_string); |
| g_free (current_bands_string); |
| g_free (supported_bands_string); |
| g_free (access_technologies_string); |
| g_free (supported_capabilities_string); |
| g_free (current_capabilities_string); |
| g_free (allowed_modes_string); |
| g_free (preferred_mode_string); |
| g_free (supported_modes_string); |
| g_free (unlock_retries_string); |
| } |
| |
| static void |
| enable_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't enable the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully enabled the modem\n"); |
| } |
| |
| static void |
| enable_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_enable_finish (modem, result, &error); |
| enable_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| disable_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't disable the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully disabled the modem\n"); |
| } |
| |
| static void |
| disable_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_disable_finish (modem, result, &error); |
| disable_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| set_power_state_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set new power state in the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set new power state in the modem\n"); |
| } |
| |
| static void |
| set_power_state_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_power_state_finish (modem, result, &error); |
| set_power_state_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| reset_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't reset the modem: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully reseted the modem\n"); |
| } |
| |
| static void |
| reset_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_reset_finish (modem, result, &error); |
| reset_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| factory_reset_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't reset the modem to factory state: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully reseted the modem to factory state\n"); |
| } |
| |
| static void |
| factory_reset_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_factory_reset_finish (modem, result, &error); |
| factory_reset_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| |
| static void |
| command_process_reply (gchar *result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: command failed: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("response: '%s'\n", result); |
| g_free (result); |
| } |
| |
| static void |
| command_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gchar * operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_command_finish (modem, result, &error); |
| command_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static guint |
| command_get_timeout (MMModem *modem) |
| { |
| gint timeout; |
| |
| /* If --timeout was given, it should already have been set in the proxy */ |
| timeout = (g_dbus_proxy_get_default_timeout (G_DBUS_PROXY (modem)) / 1000) - 1; |
| if (timeout <= 0) { |
| g_printerr ("error: timeout is too short (%d)\n", timeout); |
| exit (EXIT_FAILURE); |
| } |
| |
| return (guint)timeout; |
| } |
| |
| static void |
| create_bearer_process_reply (MMBearer *bearer, |
| const GError *error) |
| { |
| if (!bearer) { |
| g_printerr ("error: couldn't create new bearer: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("Successfully created new bearer in modem:\n"); |
| print_bearer_short_info (bearer); |
| g_object_unref (bearer); |
| } |
| |
| static void |
| create_bearer_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| MMBearer *bearer; |
| GError *error = NULL; |
| |
| bearer = mm_modem_create_bearer_finish (modem, result, &error); |
| create_bearer_process_reply (bearer, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| delete_bearer_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't delete bearer: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully deleted bearer from modem\n"); |
| } |
| |
| static void |
| delete_bearer_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_delete_bearer_finish (modem, result, &error); |
| delete_bearer_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| get_bearer_to_delete_ready (GDBusConnection *connection, |
| GAsyncResult *res) |
| { |
| MMBearer *bearer; |
| MMObject *obj = NULL; |
| |
| bearer = mmcli_get_bearer_finish (res, NULL, &obj); |
| if (!g_str_equal (mm_object_get_path (obj), mm_modem_get_path (ctx->modem))) { |
| g_printerr ("error: bearer '%s' not owned by modem '%s'", |
| mm_bearer_get_path (bearer), |
| mm_modem_get_path (ctx->modem)); |
| exit (EXIT_FAILURE); |
| } |
| |
| mm_modem_delete_bearer (ctx->modem, |
| mm_bearer_get_path (bearer), |
| ctx->cancellable, |
| (GAsyncReadyCallback)delete_bearer_ready, |
| NULL); |
| g_object_unref (bearer); |
| g_object_unref (obj); |
| } |
| |
| static void |
| set_current_capabilities_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set current capabilities: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set current capabilities in the modem\n"); |
| } |
| |
| static void |
| set_current_capabilities_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_current_capabilities_finish (modem, result, &error); |
| set_current_capabilities_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| parse_current_capabilities (MMModemCapability *capabilities) |
| { |
| GError *error = NULL; |
| |
| *capabilities = mm_common_get_capabilities_from_string (set_current_capabilities_str, |
| &error); |
| if (error) { |
| g_printerr ("error: couldn't parse list of capabilities: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| static void |
| set_current_modes_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set current modes: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set current modes in the modem\n"); |
| } |
| |
| static void |
| set_current_modes_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_current_modes_finish (modem, result, &error); |
| set_current_modes_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| parse_modes (MMModemMode *allowed, |
| MMModemMode *preferred) |
| { |
| GError *error = NULL; |
| |
| *allowed = mm_common_get_modes_from_string (set_allowed_modes_str, &error); |
| if (error) { |
| g_printerr ("error: couldn't parse list of allowed modes: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| *preferred = (set_preferred_mode_str ? |
| mm_common_get_modes_from_string (set_preferred_mode_str, &error) : |
| MM_MODEM_MODE_NONE); |
| if (error) { |
| g_printerr ("error: couldn't parse preferred mode: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| static void |
| set_current_bands_process_reply (gboolean result, |
| const GError *error) |
| { |
| if (!result) { |
| g_printerr ("error: couldn't set current bands: '%s'\n", |
| error ? error->message : "unknown error"); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_print ("successfully set current bands in the modem\n"); |
| } |
| |
| static void |
| set_current_bands_ready (MMModem *modem, |
| GAsyncResult *result, |
| gpointer nothing) |
| { |
| gboolean operation_result; |
| GError *error = NULL; |
| |
| operation_result = mm_modem_set_current_bands_finish (modem, result, &error); |
| set_current_bands_process_reply (operation_result, error); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| parse_current_bands (MMModemBand **bands, |
| guint *n_bands) |
| { |
| GError *error = NULL; |
| |
| mm_common_get_bands_from_string (set_current_bands_str, |
| bands, |
| n_bands, |
| &error); |
| if (error) { |
| g_printerr ("error: couldn't parse list of bands: '%s'\n", |
| error->message); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| static void |
| state_changed (MMModem *modem, |
| MMModemState old_state, |
| MMModemState new_state, |
| MMModemStateChangeReason reason) |
| { |
| g_print ("\t%s: State changed, '%s' --> '%s' (Reason: %s)\n", |
| mm_modem_get_path (modem), |
| mm_modem_state_get_string (old_state), |
| mm_modem_state_get_string (new_state), |
| mmcli_get_state_reason_string (reason)); |
| fflush (stdout); |
| } |
| |
| static void |
| device_removed (MMManager *manager, |
| MMObject *object) |
| { |
| if (object != ctx->object) |
| return; |
| |
| g_print ("\t%s: Removed\n", mm_object_get_path (object)); |
| fflush (stdout); |
| |
| mmcli_async_operation_done (); |
| } |
| |
| static void |
| get_modem_ready (GObject *source, |
| GAsyncResult *result, |
| gpointer none) |
| { |
| ctx->object = mmcli_get_modem_finish (result, &ctx->manager); |
| ctx->modem = mm_object_get_modem (ctx->object); |
| ctx->modem_3gpp = mm_object_get_modem_3gpp (ctx->object); |
| ctx->modem_cdma = mm_object_get_modem_cdma (ctx->object); |
| |
| /* Setup operation timeout */ |
| if (ctx->modem) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem)); |
| if (ctx->modem_3gpp) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem_3gpp)); |
| if (ctx->modem_cdma) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem_cdma)); |
| |
| if (info_flag) |
| g_assert_not_reached (); |
| |
| /* Request to monitor modems? */ |
| if (monitor_state_flag) { |
| MMModemState current; |
| |
| g_signal_connect (ctx->modem, |
| "state-changed", |
| G_CALLBACK (state_changed), |
| NULL); |
| |
| g_signal_connect (ctx->manager, |
| "object-removed", |
| G_CALLBACK (device_removed), |
| NULL); |
| |
| current = mm_modem_get_state (ctx->modem); |
| g_print ("\t%s: Initial state, '%s'\n", |
| mm_object_get_path (ctx->object), |
| mm_modem_state_get_string (current)); |
| |
| /* If we get cancelled, operation done */ |
| g_cancellable_connect (ctx->cancellable, |
| G_CALLBACK (cancelled), |
| NULL, |
| NULL); |
| return; |
| } |
| |
| /* Request to enable the modem? */ |
| if (enable_flag) { |
| g_debug ("Asynchronously enabling modem..."); |
| mm_modem_enable (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)enable_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to disable the modem? */ |
| if (disable_flag) { |
| g_debug ("Asynchronously disabling modem..."); |
| mm_modem_disable (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)disable_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to full power the modem? */ |
| if (set_power_state_on_flag) { |
| g_debug ("Asynchronously setting full power..."); |
| mm_modem_set_power_state (ctx->modem, |
| MM_MODEM_POWER_STATE_ON, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_power_state_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to low power the modem? */ |
| if (set_power_state_low_flag) { |
| g_debug ("Asynchronously setting low power..."); |
| mm_modem_set_power_state (ctx->modem, |
| MM_MODEM_POWER_STATE_LOW, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_power_state_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to power off the modem? */ |
| if (set_power_state_off_flag) { |
| g_debug ("Asynchronously powering off..."); |
| mm_modem_set_power_state (ctx->modem, |
| MM_MODEM_POWER_STATE_OFF, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_power_state_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to reset the modem? */ |
| if (reset_flag) { |
| g_debug ("Asynchronously reseting modem..."); |
| mm_modem_reset (ctx->modem, |
| ctx->cancellable, |
| (GAsyncReadyCallback)reset_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to reset the modem to factory state? */ |
| if (factory_reset_str) { |
| g_debug ("Asynchronously factory-reseting modem..."); |
| mm_modem_factory_reset (ctx->modem, |
| factory_reset_str, |
| ctx->cancellable, |
| (GAsyncReadyCallback)factory_reset_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to send a command to the modem? */ |
| if (command_str) { |
| guint timeout; |
| |
| timeout = command_get_timeout (ctx->modem); |
| |
| g_debug ("Asynchronously sending a command to the modem (%u seconds timeout)...", |
| timeout); |
| |
| mm_modem_command (ctx->modem, |
| command_str, |
| timeout, |
| ctx->cancellable, |
| (GAsyncReadyCallback)command_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to create a new bearer? */ |
| if (create_bearer_str) { |
| GError *error = NULL; |
| MMBearerProperties *properties; |
| |
| properties = mm_bearer_properties_new_from_string (create_bearer_str, &error); |
| if (!properties) { |
| g_printerr ("Error parsing properties string: '%s'\n", error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_debug ("Asynchronously creating new bearer in modem..."); |
| mm_modem_create_bearer (ctx->modem, |
| properties, |
| ctx->cancellable, |
| (GAsyncReadyCallback)create_bearer_ready, |
| NULL); |
| g_object_unref (properties); |
| return; |
| } |
| |
| /* Request to delete a given bearer? */ |
| if (delete_bearer_str) { |
| mmcli_get_bearer (ctx->connection, |
| delete_bearer_str, |
| ctx->cancellable, |
| (GAsyncReadyCallback)get_bearer_to_delete_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to set current capabilities in a given modem? */ |
| if (set_current_capabilities_str) { |
| MMModemCapability current_capabilities; |
| |
| parse_current_capabilities (¤t_capabilities); |
| mm_modem_set_current_capabilities (ctx->modem, |
| current_capabilities, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_current_capabilities_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to set allowed modes in a given modem? */ |
| if (set_allowed_modes_str) { |
| MMModemMode allowed; |
| MMModemMode preferred; |
| |
| parse_modes (&allowed, &preferred); |
| mm_modem_set_current_modes (ctx->modem, |
| allowed, |
| preferred, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_current_modes_ready, |
| NULL); |
| return; |
| } |
| |
| /* Request to set current bands in a given modem? */ |
| if (set_current_bands_str) { |
| MMModemBand *current_bands; |
| guint n_current_bands; |
| |
| parse_current_bands (¤t_bands, &n_current_bands); |
| mm_modem_set_current_bands (ctx->modem, |
| current_bands, |
| n_current_bands, |
| ctx->cancellable, |
| (GAsyncReadyCallback)set_current_bands_ready, |
| NULL); |
| g_free (current_bands); |
| return; |
| } |
| |
| /* Request to inhibit the modem? */ |
| if (inhibit_flag) { |
| gchar *uid; |
| |
| g_debug ("Asynchronously inhibiting modem..."); |
| uid = mm_modem_dup_device (ctx->modem); |
| |
| mm_manager_inhibit_device (ctx->manager, |
| uid, |
| ctx->cancellable, |
| (GAsyncReadyCallback)inhibit_device_ready, |
| uid); |
| return; |
| } |
| |
| g_warn_if_reached (); |
| } |
| |
| void |
| mmcli_modem_run_asynchronous (GDBusConnection *connection, |
| GCancellable *cancellable) |
| { |
| /* Initialize context */ |
| ctx = g_new0 (Context, 1); |
| if (cancellable) |
| ctx->cancellable = g_object_ref (cancellable); |
| ctx->connection = g_object_ref (connection); |
| |
| /* Get proper modem */ |
| mmcli_get_modem (connection, |
| mmcli_get_common_modem_string (), |
| cancellable, |
| (GAsyncReadyCallback)get_modem_ready, |
| NULL); |
| } |
| |
| void |
| mmcli_modem_run_synchronous (GDBusConnection *connection) |
| { |
| GError *error = NULL; |
| |
| if (monitor_state_flag || inhibit_flag) |
| g_assert_not_reached (); |
| |
| /* Initialize context */ |
| ctx = g_new0 (Context, 1); |
| ctx->object = mmcli_get_modem_sync (connection, |
| mmcli_get_common_modem_string (), |
| &ctx->manager); |
| ctx->modem = mm_object_get_modem (ctx->object); |
| ctx->modem_3gpp = mm_object_get_modem_3gpp (ctx->object); |
| ctx->modem_cdma = mm_object_get_modem_cdma (ctx->object); |
| |
| /* Setup operation timeout */ |
| if (ctx->modem) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem)); |
| if (ctx->modem_3gpp) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem_3gpp)); |
| if (ctx->modem_cdma) |
| mmcli_force_operation_timeout (G_DBUS_PROXY (ctx->modem_cdma)); |
| |
| /* Request to get info from modem? */ |
| if (info_flag) { |
| g_debug ("Printing modem info..."); |
| print_modem_info (); |
| return; |
| } |
| |
| /* Request to enable the modem? */ |
| if (enable_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously enabling modem..."); |
| result = mm_modem_enable_sync (ctx->modem, NULL, &error); |
| enable_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to disable the modem? */ |
| if (disable_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously disabling modem..."); |
| result = mm_modem_disable_sync (ctx->modem, NULL, &error); |
| disable_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set full power state? */ |
| if (set_power_state_on_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously setting full power..."); |
| result = mm_modem_set_power_state_sync (ctx->modem, MM_MODEM_POWER_STATE_ON, NULL, &error); |
| set_power_state_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set low power state? */ |
| if (set_power_state_low_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously setting low power..."); |
| result = mm_modem_set_power_state_sync (ctx->modem, MM_MODEM_POWER_STATE_LOW, NULL, &error); |
| set_power_state_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to power off? */ |
| if (set_power_state_off_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously powering off..."); |
| result = mm_modem_set_power_state_sync (ctx->modem, MM_MODEM_POWER_STATE_OFF, NULL, &error); |
| set_power_state_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to reset the modem? */ |
| if (reset_flag) { |
| gboolean result; |
| |
| g_debug ("Synchronously reseting modem..."); |
| result = mm_modem_reset_sync (ctx->modem, NULL, &error); |
| reset_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to reset the modem to factory state? */ |
| if (factory_reset_str) { |
| gboolean result; |
| |
| g_debug ("Synchronously factory-reseting modem..."); |
| result = mm_modem_factory_reset_sync (ctx->modem, |
| factory_reset_str, |
| NULL, |
| &error); |
| factory_reset_process_reply (result, error); |
| return; |
| } |
| |
| |
| /* Request to send a command to the modem? */ |
| if (command_str) { |
| gchar *result; |
| guint timeout; |
| |
| timeout = command_get_timeout (ctx->modem); |
| |
| g_debug ("Synchronously sending command to modem (%u seconds timeout)...", |
| timeout); |
| |
| result = mm_modem_command_sync (ctx->modem, |
| command_str, |
| timeout, |
| NULL, |
| &error); |
| command_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to create a new bearer? */ |
| if (create_bearer_str) { |
| MMBearer *bearer; |
| GError *error = NULL; |
| MMBearerProperties *properties; |
| |
| properties = mm_bearer_properties_new_from_string (create_bearer_str, &error); |
| if (!properties) { |
| g_printerr ("Error parsing properties string: '%s'\n", error->message); |
| exit (EXIT_FAILURE); |
| } |
| |
| g_debug ("Synchronously creating new bearer in modem..."); |
| bearer = mm_modem_create_bearer_sync (ctx->modem, |
| properties, |
| NULL, |
| &error); |
| g_object_unref (properties); |
| |
| create_bearer_process_reply (bearer, error); |
| return; |
| } |
| |
| /* Request to delete a given bearer? */ |
| if (delete_bearer_str) { |
| gboolean result; |
| MMBearer *bearer; |
| MMObject *obj = NULL; |
| |
| bearer = mmcli_get_bearer_sync (connection, |
| delete_bearer_str, |
| NULL, |
| &obj); |
| if (!g_str_equal (mm_object_get_path (obj), mm_modem_get_path (ctx->modem))) { |
| g_printerr ("error: bearer '%s' not owned by modem '%s'", |
| mm_bearer_get_path (bearer), |
| mm_modem_get_path (ctx->modem)); |
| exit (EXIT_FAILURE); |
| } |
| |
| result = mm_modem_delete_bearer_sync (ctx->modem, |
| mm_bearer_get_path (bearer), |
| NULL, |
| &error); |
| g_object_unref (bearer); |
| g_object_unref (obj); |
| |
| delete_bearer_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set capabilities in a given modem? */ |
| if (set_current_capabilities_str) { |
| gboolean result; |
| MMModemCapability current_capabilities; |
| |
| parse_current_capabilities (¤t_capabilities); |
| result = mm_modem_set_current_capabilities_sync (ctx->modem, |
| current_capabilities, |
| NULL, |
| &error); |
| set_current_capabilities_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set allowed modes in a given modem? */ |
| if (set_allowed_modes_str) { |
| MMModemMode allowed; |
| MMModemMode preferred; |
| gboolean result; |
| |
| parse_modes (&allowed, &preferred); |
| result = mm_modem_set_current_modes_sync (ctx->modem, |
| allowed, |
| preferred, |
| NULL, |
| &error); |
| |
| set_current_modes_process_reply (result, error); |
| return; |
| } |
| |
| /* Request to set allowed bands in a given modem? */ |
| if (set_current_bands_str) { |
| gboolean result; |
| MMModemBand *current_bands; |
| guint n_current_bands; |
| |
| parse_current_bands (¤t_bands, &n_current_bands); |
| result = mm_modem_set_current_bands_sync (ctx->modem, |
| current_bands, |
| n_current_bands, |
| NULL, |
| &error); |
| g_free (current_bands); |
| set_current_bands_process_reply (result, error); |
| return; |
| } |
| |
| g_warn_if_reached (); |
| } |