introspection/org.freedesktop.ModemManager1.Modem.ModemCdma.xml

<?xml version="1.0" encoding="UTF-8" ?>

<!--
 ModemManager 1.0 Interface Specification

   Copyright (C) 2008 Novell, Inc.
   Copyright (C) 2008-2013 Red Hat, Inc.
   Copyright (C) 2011-2013 Google, Inc.
   Copyright (C) 2011-2013 Lanedo GmbH
-->

<node name="/" xmlns:doc="http://www.freedesktop.org/dbus/1.0/doc.dtd">

  <!--
      org.freedesktop.ModemManager1.Modem.ModemCdma:
      @short_description: The ModemManager CDMA interface.

      This interface provides access to specific actions that may be performed
      in modems with CDMA capabilities.

      This interface will only be available once the modem is ready to be
      registered in the cellular network. Mixed 3GPP+3GPP2 devices will require
      a valid unlocked SIM card before any of the features in the interface can
      be used.
  -->
  <interface name="org.freedesktop.ModemManager1.Modem.ModemCdma">

    <!--
        Activate:
        @carrier_code: Name of carrier, or carrier-specific code.

        Provisions the modem for use with a given carrier using the modem's
        <ulink url="http://en.wikipedia.org/wiki/Over-the-air_programming">Over-The-Air (OTA)</ulink>
        activation functionality, if any.

        Some modems will reboot after this call is made.
    -->
    <method name="Activate">
      <arg name="carrier_code" type="s" direction="in" />
    </method>

    <!--
        ActivateManual:
        @properties: A dictionary of properties to set on the modem.

        Sets the modem provisioning data directly, without contacting the
        carrier over the air.

        Some modems will reboot after this call is made.

        This dictionary is composed of a string identifier key
        with an associated data which contains type-specific location
        information:

        <variablelist>
        <varlistentry><term>"spc"</term>
          <listitem>
            <para>
              The Service Programming Code, given as a string of exactly 6 digit characters. Mandatory parameter.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"sid"</term>
          <listitem>
            <para>
              The System Identification Number, given as a 16-bit unsigned integer (signature <literal>"q"</literal>). Mandatory parameter.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"mdn"</term>
          <listitem>
            <para>
              The Mobile Directory Number, given as a string of maximum 15 characters. Mandatory parameter.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"min"</term>
          <listitem>
            <para>
              The Mobile Identification Number, given as a string of maximum 15 characters. Mandatory parameter.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"mn-ha-key"</term>
          <listitem>
            <para>
              The MN-HA key, given as a string of maximum 16 characters.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"mn-aaa-key"</term>
          <listitem>
            <para>
              The MN-AAA key, given as a string of maximum 16 characters.
            </para>
          </listitem>
        </varlistentry>
        <varlistentry><term>"prl"</term>
          <listitem>
            <para>
              The Preferred Roaming List, given as an array of maximum 16384 bytes.
            </para>
          </listitem>
        </varlistentry>
        </variablelist>
    -->
    <method name="ActivateManual">
      <arg name="properties" type="a{sv}" direction="in" />
    </method>

    <!--
        ActivationStateChanged:
        @activation_state: Current activation state, given as a <link linkend="MMModemCdmaActivationState">MMModemCdmaActivationState</link>.
        @activation_error: Carrier-specific error code, given as a <link linkend="MMCdmaActivationError">MMCdmaActivationError</link>.
        @status_changes: Properties that have changed as a result of this activation state chage, including <literal>"mdn"</literal> and <literal>"min"</literal>. The dictionary may be empty if the changed properties are unknown.

        The device activation state changed.
    -->
    <signal name="ActivationStateChanged">
      <arg name="activation_state" type="u"     />
      <arg name="activation_error" type="u"     />
      <arg name="status_changes"   type="a{sv}" />
    </signal>

    <!--
        ActivationState:

        A <link linkend="MMModemCdmaActivationState">MMModemCdmaActivationState</link>
        value specifying the state of the activation in the 3GPP2 network.
    -->
    <property name="ActivationState" type="u" access="read" />

    <!--
        Meid:

        The modem's <ulink url="http://en.wikipedia.org/wiki/MEID">Mobile Equipment Identifier</ulink>.
    -->
    <property name="Meid" type="s" access="read" />


    <!--
        Esn:

        The modem's
        <ulink url="http://en.wikipedia.org/wiki/Electronic_serial_number">Electronic Serial Number</ulink>
        (superceded by MEID but still used by older devices).
    -->
    <property name="Esn" type="s" access="read" />

    <!--
        Sid:

        The
        <ulink url="http://en.wikipedia.org/wiki/System_Identification_Number">System Identifier</ulink>
        of the serving CDMA 1x network, if known, and
        if the modem is registered with a CDMA 1x network.

        See <ulink url="http://ifast.org">ifast.org</ulink> or the mobile
        broadband provider database for mappings of SIDs to network providers.
    -->
    <property name="Sid" type="u" access="read" />

    <!--
        Nid:

        The
        <ulink url="http://en.wikipedia.org/wiki/Network_Identification_Number">Network Identifier</ulink>
        of the serving CDMA 1x network, if known, and
        if the modem is registered with a CDMA 1x network.
    -->
    <property name="Nid" type="u" access="read" />

    <!--
        Cdma1xRegistrationState:

        A <link linkend="MMModemCdmaRegistrationState">MMModemCdmaRegistrationState</link>
        value specifying the CDMA 1x registration state.
    -->
    <property name="Cdma1xRegistrationState" type="u" access="read" />

    <!--
        EvdoRegistrationState:

        A <link linkend="MMModemCdmaRegistrationState">MMModemCdmaRegistrationState</link>
        value specifying the EVDO registration state.
    -->
    <property name="EvdoRegistrationState" type="u" access="read" />

  </interface>
</node>