| /* ********************************************************** |
| * Copyright (c) 2003-2005 VMware, Inc. All rights reserved. |
| * **********************************************************/ |
| |
| /* |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * * Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * * Neither the name of VMware, Inc. nor the names of its contributors may be |
| * used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL VMWARE, INC. OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| * DAMAGE. |
| */ |
| |
| /* |
| * services.c |
| * |
| * helper methods dealing with services |
| * |
| */ |
| |
| #include "share.h" |
| #include "services.h" |
| |
| #ifndef UNIT_TEST |
| |
| UINT NUM_SERVICES = 0; |
| |
| typedef struct ServiceInfo_ { |
| ServiceHandle svch; |
| DWORD start_type; |
| WCHAR *binary_pathname; |
| WCHAR *service_name; |
| WCHAR *service_display_name; |
| } ServiceInfo; |
| |
| ServiceInfo *services = NULL; |
| |
| /* the service manager database handle */ |
| SC_HANDLE scmdb; |
| |
| BOOL services_initialized = FALSE; |
| |
| #define SVC_BUFSZ 4096 |
| |
| DWORD |
| get_service_strings() |
| { |
| DWORD needed, nsvcs, next = 0, i; |
| BOOL bRes; |
| ENUM_SERVICE_STATUS *infobuf; |
| SC_HANDLE sch; |
| QUERY_SERVICE_CONFIG *scfg; |
| BYTE buffer[SVC_BUFSZ]; |
| |
| /* now read in the service information */ |
| scfg = (QUERY_SERVICE_CONFIG *)buffer; |
| |
| EnumServicesStatus(scmdb, SERVICE_WIN32, SERVICE_STATE_ALL, NULL, 0, |
| &needed, &nsvcs, &next); |
| infobuf = (ENUM_SERVICE_STATUS *)malloc(needed); |
| |
| bRes = EnumServicesStatus(scmdb, |
| SERVICE_WIN32, |
| SERVICE_STATE_ALL, |
| infobuf, |
| needed, |
| &needed, |
| &nsvcs, |
| &next); |
| |
| if(!bRes) |
| return GetLastError(); |
| |
| NUM_SERVICES = nsvcs; |
| services = (ServiceInfo *)malloc(nsvcs * sizeof(ServiceInfo)); |
| memset(services, 0, nsvcs * sizeof(ServiceInfo)); |
| |
| for(i = 0; i < nsvcs; i++) { |
| services[i].svch = i; |
| services[i].service_name = wcsdup(infobuf[i].lpServiceName); |
| |
| sch = OpenService(scmdb, services[i].service_name, |
| SERVICE_QUERY_CONFIG); |
| if (QueryServiceConfig(sch, scfg, SVC_BUFSZ, &needed)) { |
| services[i].service_display_name = |
| wcsdup(scfg->lpDisplayName); |
| |
| services[i].binary_pathname = |
| wcsdup(scfg->lpBinaryPathName); |
| |
| services[i].start_type = scfg->dwStartType; |
| } |
| |
| CloseServiceHandle(sch); |
| } |
| |
| free(infobuf); |
| |
| return ERROR_SUCCESS; |
| } |
| |
| void |
| free_service_strings() |
| { |
| UINT i; |
| |
| if (services == NULL) |
| return; |
| |
| for(i = 0; i < NUM_SERVICES; i++) { |
| free(services[i].service_name); |
| free(services[i].service_display_name); |
| free(services[i].binary_pathname); |
| } |
| |
| free(services); |
| |
| services = NULL; |
| } |
| |
| DWORD |
| reload_service_info() |
| { |
| free_service_strings(); |
| return get_service_strings(); |
| } |
| |
| |
| /* |
| * |
| * interface functions |
| * |
| */ |
| |
| DWORD |
| enumerate_services(services_callback cb, void **param) |
| { |
| ServiceHandle svc; |
| |
| for (svc = 0; svc < NUM_SERVICES; svc++) |
| if ( ! (*cb)(svc, param) ) |
| break; |
| |
| return ERROR_SUCCESS; |
| } |
| |
| ServiceHandle |
| get_service_by_name(const WCHAR *name) |
| { |
| ServiceHandle svc; |
| for (svc = 0; svc < NUM_SERVICES; ++svc) |
| if (!wcsicmp(services[svc].service_name, name)) |
| return svc; |
| |
| return INVALID_SERVICE_HANDLE; |
| } |
| |
| const WCHAR * |
| get_service_name(ServiceHandle service) |
| { |
| if(0 <= service && service < NUM_SERVICES) |
| return services[service].service_name; |
| else |
| return NULL; |
| } |
| |
| const WCHAR * |
| get_service_display_name(ServiceHandle service) |
| { |
| if (0 <= service && service < NUM_SERVICES) |
| return services[service].service_display_name; |
| else |
| return NULL; |
| } |
| |
| DWORD |
| services_init() |
| { |
| DWORD res; |
| if (services_initialized) |
| return ERROR_ALREADY_INITIALIZED; |
| |
| /* FIXME: probably only need read access, except |
| * for change config...but that should just open its own |
| * handle. */ |
| scmdb = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS); |
| if (scmdb == NULL) { |
| /* probably because of non-admin privileges. open read only. */ |
| scmdb = OpenSCManager(NULL, NULL, GENERIC_READ); |
| if (scmdb == NULL) { |
| res = GetLastError(); |
| return res == ERROR_SUCCESS ? -1 : res; |
| } |
| } |
| |
| res = get_service_strings(); |
| if (res != ERROR_SUCCESS) |
| return res; |
| services_initialized = TRUE; |
| |
| return ERROR_SUCCESS; |
| } |
| |
| DWORD |
| services_cleanup() |
| { |
| if (!services_initialized) |
| return ERROR_SUCCESS; |
| |
| services_initialized = FALSE; |
| |
| free_service_strings(); |
| |
| CloseServiceHandle(scmdb); |
| NUM_SERVICES = 0; |
| |
| return ERROR_SUCCESS; |
| } |
| |
| |
| int |
| service_status(ServiceHandle service) |
| { |
| SERVICE_STATUS ss; |
| |
| SC_HANDLE hsvc = OpenService(scmdb, |
| services[service].service_name, |
| SERVICE_QUERY_STATUS); |
| |
| QueryServiceStatus(hsvc, &ss); |
| CloseServiceHandle(hsvc); |
| |
| return ss.dwCurrentState; |
| } |
| |
| DWORD |
| add_dependent_service(ServiceHandle service, ServiceHandle requiredService) |
| { |
| BOOL cscres; |
| WCHAR dep[MAX_PATH]; |
| WCHAR *nextdep = NULL; |
| QUERY_SERVICE_CONFIG *scfg; |
| BYTE buffer[SVC_BUFSZ]; |
| SIZE_T size; |
| SC_HANDLE hsvc = OpenService(scmdb, |
| services[service].service_name, |
| SERVICE_QUERY_CONFIG|SERVICE_CHANGE_CONFIG); |
| |
| if (hsvc == NULL) |
| return GetLastError(); |
| |
| scfg = (QUERY_SERVICE_CONFIG *)buffer; |
| if (!QueryServiceConfig(hsvc, scfg, SVC_BUFSZ, &size)) { |
| return GetLastError(); |
| } |
| |
| nextdep = scfg->lpDependencies; |
| size = 0; |
| |
| while (nextdep != NULL) { |
| if (nextdep[0] == L'\0') |
| break; |
| size += wcslen(nextdep) + 1; |
| nextdep = scfg->lpDependencies + size; |
| } |
| |
| if (size > MAX_PATH - 2) |
| return ERROR_INSUFFICIENT_BUFFER; |
| |
| if (size != 0) { |
| memcpy(dep, scfg->lpDependencies, size * sizeof(WCHAR)); |
| } |
| |
| wcsncpy(&dep[size], services[requiredService].service_name, |
| MAX_PATH - size); |
| |
| size += wcslen(services[requiredService].service_name) + 1; |
| |
| if (size > MAX_PATH - 2) { |
| CloseServiceHandle(hsvc); |
| return ERROR_INSUFFICIENT_BUFFER; |
| } |
| |
| dep[size + 1] = L'\0'; |
| |
| cscres = ChangeServiceConfig(hsvc, |
| SERVICE_NO_CHANGE, |
| SERVICE_NO_CHANGE, |
| SERVICE_NO_CHANGE, |
| NULL, |
| NULL, |
| NULL, |
| dep, |
| NULL, |
| NULL, |
| NULL); |
| |
| CloseServiceHandle(hsvc); |
| |
| if (!cscres) |
| return GetLastError(); |
| |
| return reload_service_info(); |
| } |
| |
| DWORD |
| reset_dependent_services(ServiceHandle service) |
| { |
| BOOL cscres; |
| SC_HANDLE hsvc = OpenService(scmdb, |
| services[service].service_name, |
| SERVICE_CHANGE_CONFIG); |
| |
| if (hsvc == NULL) |
| return GetLastError(); |
| |
| cscres = ChangeServiceConfig(hsvc, |
| SERVICE_NO_CHANGE, |
| SERVICE_NO_CHANGE, |
| SERVICE_NO_CHANGE, |
| NULL, |
| NULL, |
| NULL, |
| L"", |
| NULL, |
| NULL, |
| NULL); |
| |
| CloseServiceHandle(hsvc); |
| |
| if (!cscres) |
| return GetLastError(); |
| |
| return reload_service_info(); |
| } |
| |
| DWORD |
| set_service_start_type(ServiceHandle service, DWORD dwStartType) |
| { |
| BOOL cscres; |
| SC_HANDLE hsvc = OpenService(scmdb, |
| services[service].service_name, |
| SERVICE_CHANGE_CONFIG); |
| |
| if (hsvc == NULL) |
| return GetLastError(); |
| |
| cscres = ChangeServiceConfig(hsvc, |
| SERVICE_NO_CHANGE, |
| dwStartType, |
| SERVICE_NO_CHANGE, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| NULL); |
| |
| CloseServiceHandle(hsvc); |
| |
| if (!cscres) |
| return GetLastError(); |
| |
| return reload_service_info(); |
| } |
| |
| DWORD |
| get_service_start_type(ServiceHandle service) |
| { |
| return services[service].start_type; |
| } |
| |
| /* delay to wait before restarting the service after a failure. */ |
| #define SERVICE_RESTART_DELAY_MS 60000 |
| |
| /* QueryServiceConfig2 and ChangeServiceConfig2 are not supported |
| * on NT, so we load these dynamically. |
| */ |
| typedef BOOL (WINAPI *QueryServiceConfig2Func)(SC_HANDLE hService, |
| DWORD dwInfoLevel, |
| LPBYTE lpBuffer, |
| DWORD cbBufSize, |
| LPDWORD pcbBytesNeeded); |
| |
| typedef BOOL (WINAPI *ChangeServiceConfig2Func)(SC_HANDLE hService, |
| DWORD dwInfoLevel, |
| LPVOID lpInfo); |
| |
| /* sets the windows service config to autostart. we do this here |
| * because InstallShield doesn't provide a nice interface for it, it |
| * would require adding a custom DLL to the nodemanager |
| * install. plus, we get the additional benefit that we always make |
| * sure this is set, even if it gets turned off somehow. in the |
| * future we can have a controller-configurable parameter that |
| * controls whether we always enforce auto-restart of the service. |
| * |
| * if fatal_error_encountered, turn this shit off so we don't spin |
| * wheels and write one eventlog message every minute. */ |
| DWORD |
| set_service_restart_type(WCHAR *svcname, BOOL disable) |
| { |
| SC_HANDLE scmdb = NULL, service = NULL; |
| SC_ACTION restart_action = |
| { SC_ACTION_RESTART, SERVICE_RESTART_DELAY_MS }; |
| SERVICE_FAILURE_ACTIONS failure_actions = |
| { 0, /* dwResetPeriod: we only have one failure action, so |
| just keep at zero*/ |
| L"", /* we don't force server reboot on failure */ |
| L"", /* nor do we execute any commands */ |
| 1, /* we have one action in our array */ |
| NULL /* which will be set to &restart_action below */ |
| }; |
| /* if this buffer size is exceeded then the QueryServiceConfig |
| * will fail with ERROR_INSUFFICIENT_BUFFER, in which case we can |
| * be sure that someone mucked our settings. */ |
| BYTE current_actions_buffer[sizeof(SERVICE_FAILURE_ACTIONS) + |
| 5*sizeof(SC_ACTION)] = { 0 }; |
| SERVICE_FAILURE_ACTIONS * current_actions = |
| (SERVICE_FAILURE_ACTIONS *)¤t_actions_buffer; |
| DWORD res = ERROR_SUCCESS, needed; |
| QueryServiceConfig2Func qscf; |
| ChangeServiceConfig2Func cscf; |
| HMODULE advapi = NULL; |
| |
| /* finish setting up the failure_actions data structure */ |
| failure_actions.lpsaActions = &restart_action; |
| |
| /* first: check if we've got the necessary API available. if not, |
| * this means we're on NT -- abort with ERROR_NOT_SUPPORTED (NT |
| * does not support service failure actions). */ |
| advapi = GetModuleHandle(L"advapi32.dll"); |
| if (advapi == NULL) { |
| return ERROR_NOT_SUPPORTED; |
| } |
| |
| qscf = (QueryServiceConfig2Func) |
| GetProcAddress(advapi, "QueryServiceConfig2W"); |
| cscf = (ChangeServiceConfig2Func) |
| GetProcAddress(advapi, "ChangeServiceConfig2W"); |
| |
| if (qscf == NULL || cscf == NULL) { |
| return ERROR_NOT_SUPPORTED; |
| } |
| |
| /* okay, we've got the API, now do the work */ |
| |
| if (disable) |
| restart_action.Type = SC_ACTION_NONE; |
| |
| scmdb = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS); |
| if (scmdb == NULL) { |
| res = GetLastError(); |
| goto autorestart_out; |
| } |
| |
| service = OpenService(scmdb, |
| svcname, |
| SERVICE_ALL_ACCESS); |
| |
| if (service == NULL) { |
| res = GetLastError(); |
| goto autorestart_out; |
| } |
| |
| if ((*qscf)(service, |
| SERVICE_CONFIG_FAILURE_ACTIONS, |
| (LPBYTE) current_actions, |
| sizeof(current_actions_buffer), |
| &needed) || |
| (res = GetLastError()) == ERROR_INSUFFICIENT_BUFFER) { |
| /* check if it's already set up */ |
| SC_ACTION *current_action = current_actions->lpsaActions; |
| if (!disable && |
| current_actions->cActions == 1 && |
| current_action->Type == SC_ACTION_RESTART) |
| goto autorestart_out; |
| |
| /* if not, change the configuration */ |
| if (!(*cscf)(service, |
| SERVICE_CONFIG_FAILURE_ACTIONS, |
| (LPVOID) &failure_actions)) { |
| res = GetLastError(); |
| goto autorestart_out; |
| } |
| |
| } |
| else { |
| res = GetLastError(); |
| goto autorestart_out; |
| } |
| |
| autorestart_out: |
| if (service != NULL) |
| CloseServiceHandle(service); |
| |
| if (scmdb != NULL) |
| CloseServiceHandle(scmdb); |
| |
| return res; |
| } |
| |
| |
| |
| #else //ifdef UNIT_TEST |
| |
| |
| |
| BOOL found; |
| ServiceHandle target; |
| int num; |
| |
| BOOL |
| svc_cb(ServiceHandle service, void **param) |
| { |
| if (service == target) |
| found = TRUE; |
| num++; |
| DO_ASSERT(wcslen(get_service_name(service)) > 0); |
| return TRUE; |
| } |
| |
| |
| int |
| main() |
| { |
| DWORD res, type; |
| WCHAR *s1, *sn1; |
| const WCHAR *c1; |
| ServiceHandle sh1, sh2 = 0; |
| |
| set_debuglevel(DL_INFO); |
| set_abortlevel(DL_WARN); |
| |
| res = services_init(); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| |
| sn1 = L"Eventlog"; |
| s1 = L"Event Log"; |
| sh1 = get_service_by_name(sn1); |
| DO_ASSERT(sh1 != INVALID_SERVICE_HANDLE); |
| |
| c1 = get_service_name(sh1); |
| DO_ASSERT_WSTR_EQ(sn1, (WCHAR *)c1); |
| |
| c1 = get_service_display_name(sh1); |
| DO_ASSERT_WSTR_EQ(s1, (WCHAR *)c1); |
| |
| found = FALSE; |
| target = sh1; |
| res = enumerate_services(&svc_cb, NULL); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| DO_ASSERT(num > 10); |
| DO_ASSERT(found); |
| printf("%d services found on local machine.\n", num); |
| |
| |
| sh1 = get_service_by_name(L"Alerter"); |
| DO_ASSERT(sh1 != INVALID_SERVICE_HANDLE); |
| type = get_service_start_type(sh1); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| |
| res = set_service_start_type(sh1, SERVICE_DEMAND_START); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| |
| res = reload_service_info(); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| DO_ASSERT(SERVICE_DEMAND_START == get_service_start_type(sh1)); |
| |
| res = set_service_start_type(sh1, SERVICE_AUTO_START); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| |
| DO_ASSERT(SERVICE_AUTO_START == get_service_start_type(sh1)); |
| |
| res = set_service_start_type(sh1, type); |
| DO_ASSERT(type == get_service_start_type(sh1)); |
| |
| #if 0 |
| /* FIXME: should have a usable test here */ |
| sh1 = get_service_by_name(L"TomcatSC"); |
| DO_ASSERT(sh1 != INVALID_SERVICE_HANDLE); |
| sh2 = get_service_by_name(L"MySQL"); |
| DO_ASSERT(sh2 != INVALID_SERVICE_HANDLE); |
| |
| res = add_dependent_service(sh1, sh2); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| #endif |
| |
| res = services_cleanup(); |
| DO_ASSERT(res == ERROR_SUCCESS); |
| |
| |
| |
| printf("All Test Passed\n"); |
| |
| return 0; |
| |
| } |
| |
| |
| #endif |