| /* | |
| * This code is derived from (original license follows): | |
| * | |
| * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc. | |
| * MD5 Message-Digest Algorithm (RFC 1321). | |
| * | |
| * Homepage: | |
| * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 | |
| * | |
| * Author: | |
| * Alexander Peslyak, better known as Solar Designer <solar at openwall.com> | |
| * | |
| * This software was written by Alexander Peslyak in 2001. No copyright is | |
| * claimed, and the software is hereby placed in the public domain. | |
| * In case this attempt to disclaim copyright and place the software in the | |
| * public domain is deemed null and void, then the software is | |
| * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the | |
| * general public under the following terms: | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted. | |
| * | |
| * There's ABSOLUTELY NO WARRANTY, express or implied. | |
| * | |
| * (This is a heavily cut-down "BSD license".) | |
| * | |
| * This differs from Colin Plumb's older public domain implementation in that | |
| * no exactly 32-bit integer data type is required (any 32-bit or wider | |
| * unsigned integer data type will do), there's no compile-time endianness | |
| * configuration, and the function prototypes match OpenSSL's. No code from | |
| * Colin Plumb's implementation has been reused; this comment merely compares | |
| * the properties of the two independent implementations. | |
| * | |
| * The primary goals of this implementation are portability and ease of use. | |
| * It is meant to be fast, but not as fast as possible. Some known | |
| * optimizations are not included to reduce source code size and avoid | |
| * compile-time configuration. | |
| */ | |
| #include "llvm/Support/MD5.h" | |
| #include "llvm/ADT/ArrayRef.h" | |
| #include "llvm/ADT/StringRef.h" | |
| #include "llvm/Support/Endian.h" | |
| #include "llvm/Support/Format.h" | |
| #include "llvm/Support/raw_ostream.h" | |
| #include <array> | |
| #include <cstdint> | |
| #include <cstring> | |
| // The basic MD5 functions. | |
| // F and G are optimized compared to their RFC 1321 definitions for | |
| // architectures that lack an AND-NOT instruction, just like in Colin Plumb's | |
| // implementation. | |
| #define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z)))) | |
| #define G(x, y, z) ((y) ^ ((z) & ((x) ^ (y)))) | |
| #define H(x, y, z) ((x) ^ (y) ^ (z)) | |
| #define I(x, y, z) ((y) ^ ((x) | ~(z))) | |
| // The MD5 transformation for all four rounds. | |
| #define STEP(f, a, b, c, d, x, t, s) \ | |
| (a) += f((b), (c), (d)) + (x) + (t); \ | |
| (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \ | |
| (a) += (b); | |
| // SET reads 4 input bytes in little-endian byte order and stores them | |
| // in a properly aligned word in host byte order. | |
| #define SET(n) \ | |
| (block[(n)] = \ | |
| (MD5_u32plus) ptr[(n) * 4] | ((MD5_u32plus) ptr[(n) * 4 + 1] << 8) | \ | |
| ((MD5_u32plus) ptr[(n) * 4 + 2] << 16) | \ | |
| ((MD5_u32plus) ptr[(n) * 4 + 3] << 24)) | |
| #define GET(n) (block[(n)]) | |
| using namespace llvm; | |
| /// This processes one or more 64-byte data blocks, but does NOT update | |
| ///the bit counters. There are no alignment requirements. | |
| const uint8_t *MD5::body(ArrayRef<uint8_t> Data) { | |
| const uint8_t *ptr; | |
| MD5_u32plus a, b, c, d; | |
| MD5_u32plus saved_a, saved_b, saved_c, saved_d; | |
| unsigned long Size = Data.size(); | |
| ptr = Data.data(); | |
| a = this->a; | |
| b = this->b; | |
| c = this->c; | |
| d = this->d; | |
| do { | |
| saved_a = a; | |
| saved_b = b; | |
| saved_c = c; | |
| saved_d = d; | |
| // Round 1 | |
| STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7) | |
| STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12) | |
| STEP(F, c, d, a, b, SET(2), 0x242070db, 17) | |
| STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22) | |
| STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7) | |
| STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12) | |
| STEP(F, c, d, a, b, SET(6), 0xa8304613, 17) | |
| STEP(F, b, c, d, a, SET(7), 0xfd469501, 22) | |
| STEP(F, a, b, c, d, SET(8), 0x698098d8, 7) | |
| STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12) | |
| STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17) | |
| STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22) | |
| STEP(F, a, b, c, d, SET(12), 0x6b901122, 7) | |
| STEP(F, d, a, b, c, SET(13), 0xfd987193, 12) | |
| STEP(F, c, d, a, b, SET(14), 0xa679438e, 17) | |
| STEP(F, b, c, d, a, SET(15), 0x49b40821, 22) | |
| // Round 2 | |
| STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5) | |
| STEP(G, d, a, b, c, GET(6), 0xc040b340, 9) | |
| STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14) | |
| STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20) | |
| STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5) | |
| STEP(G, d, a, b, c, GET(10), 0x02441453, 9) | |
| STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14) | |
| STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20) | |
| STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5) | |
| STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9) | |
| STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14) | |
| STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20) | |
| STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5) | |
| STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9) | |
| STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14) | |
| STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20) | |
| // Round 3 | |
| STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4) | |
| STEP(H, d, a, b, c, GET(8), 0x8771f681, 11) | |
| STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16) | |
| STEP(H, b, c, d, a, GET(14), 0xfde5380c, 23) | |
| STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4) | |
| STEP(H, d, a, b, c, GET(4), 0x4bdecfa9, 11) | |
| STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16) | |
| STEP(H, b, c, d, a, GET(10), 0xbebfbc70, 23) | |
| STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4) | |
| STEP(H, d, a, b, c, GET(0), 0xeaa127fa, 11) | |
| STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16) | |
| STEP(H, b, c, d, a, GET(6), 0x04881d05, 23) | |
| STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4) | |
| STEP(H, d, a, b, c, GET(12), 0xe6db99e5, 11) | |
| STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16) | |
| STEP(H, b, c, d, a, GET(2), 0xc4ac5665, 23) | |
| // Round 4 | |
| STEP(I, a, b, c, d, GET(0), 0xf4292244, 6) | |
| STEP(I, d, a, b, c, GET(7), 0x432aff97, 10) | |
| STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15) | |
| STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21) | |
| STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6) | |
| STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10) | |
| STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15) | |
| STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21) | |
| STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6) | |
| STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10) | |
| STEP(I, c, d, a, b, GET(6), 0xa3014314, 15) | |
| STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21) | |
| STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6) | |
| STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10) | |
| STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15) | |
| STEP(I, b, c, d, a, GET(9), 0xeb86d391, 21) | |
| a += saved_a; | |
| b += saved_b; | |
| c += saved_c; | |
| d += saved_d; | |
| ptr += 64; | |
| } while (Size -= 64); | |
| this->a = a; | |
| this->b = b; | |
| this->c = c; | |
| this->d = d; | |
| return ptr; | |
| } | |
| MD5::MD5() = default; | |
| /// Incrementally add the bytes in \p Data to the hash. | |
| void MD5::update(ArrayRef<uint8_t> Data) { | |
| MD5_u32plus saved_lo; | |
| unsigned long used, free; | |
| const uint8_t *Ptr = Data.data(); | |
| unsigned long Size = Data.size(); | |
| saved_lo = lo; | |
| if ((lo = (saved_lo + Size) & 0x1fffffff) < saved_lo) | |
| hi++; | |
| hi += Size >> 29; | |
| used = saved_lo & 0x3f; | |
| if (used) { | |
| free = 64 - used; | |
| if (Size < free) { | |
| memcpy(&buffer[used], Ptr, Size); | |
| return; | |
| } | |
| memcpy(&buffer[used], Ptr, free); | |
| Ptr = Ptr + free; | |
| Size -= free; | |
| body(makeArrayRef(buffer, 64)); | |
| } | |
| if (Size >= 64) { | |
| Ptr = body(makeArrayRef(Ptr, Size & ~(unsigned long) 0x3f)); | |
| Size &= 0x3f; | |
| } | |
| memcpy(buffer, Ptr, Size); | |
| } | |
| /// Add the bytes in the StringRef \p Str to the hash. | |
| // Note that this isn't a string and so this won't include any trailing NULL | |
| // bytes. | |
| void MD5::update(StringRef Str) { | |
| ArrayRef<uint8_t> SVal((const uint8_t *)Str.data(), Str.size()); | |
| update(SVal); | |
| } | |
| /// Finish the hash and place the resulting hash into \p result. | |
| /// \param Result is assumed to be a minimum of 16-bytes in size. | |
| void MD5::final(MD5Result &Result) { | |
| unsigned long used, free; | |
| used = lo & 0x3f; | |
| buffer[used++] = 0x80; | |
| free = 64 - used; | |
| if (free < 8) { | |
| memset(&buffer[used], 0, free); | |
| body(makeArrayRef(buffer, 64)); | |
| used = 0; | |
| free = 64; | |
| } | |
| memset(&buffer[used], 0, free - 8); | |
| lo <<= 3; | |
| support::endian::write32le(&buffer[56], lo); | |
| support::endian::write32le(&buffer[60], hi); | |
| body(makeArrayRef(buffer, 64)); | |
| support::endian::write32le(&Result[0], a); | |
| support::endian::write32le(&Result[4], b); | |
| support::endian::write32le(&Result[8], c); | |
| support::endian::write32le(&Result[12], d); | |
| } | |
| SmallString<32> MD5::MD5Result::digest() const { | |
| SmallString<32> Str; | |
| raw_svector_ostream Res(Str); | |
| for (int i = 0; i < 16; ++i) | |
| Res << format("%.2x", Bytes[i]); | |
| return Str; | |
| } | |
| void MD5::stringifyResult(MD5Result &Result, SmallString<32> &Str) { | |
| Str = Result.digest(); | |
| } | |
| std::array<uint8_t, 16> MD5::hash(ArrayRef<uint8_t> Data) { | |
| MD5 Hash; | |
| Hash.update(Data); | |
| MD5::MD5Result Res; | |
| Hash.final(Res); | |
| return Res; | |
| } |