| #!/usr/bin/env python2 |
| |
| # Copyright 2015 WebAssembly Community Group participants |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import os, shutil, sys, subprocess, difflib, json, time, urllib2 |
| |
| import scripts.storage |
| from scripts.support import run_command, split_wast |
| |
| interpreter = None |
| requested = [] |
| torture = True |
| only_prepare = False |
| |
| for arg in sys.argv[1:]: |
| if arg.startswith('--interpreter='): |
| interpreter = arg.split('=')[1] |
| print '[ using wasm interpreter at "%s" ]' % interpreter |
| assert os.path.exists(interpreter), 'interpreter not found' |
| elif arg == '--torture': |
| torture = True |
| elif arg == '--no-torture': |
| torture = False |
| elif arg == '--only-prepare': |
| only_prepare = True |
| else: |
| requested.append(arg) |
| |
| warnings = [] |
| |
| def warn(text): |
| global warnings |
| warnings.append(text) |
| print 'warning:', text |
| |
| # setup |
| |
| BASE_DIR = os.path.abspath('test') |
| WATERFALL_BUILD_DIR = os.path.join(BASE_DIR, 'wasm-install') |
| BIN_DIR = os.path.abspath(os.path.join(WATERFALL_BUILD_DIR, 'wasm-install', 'bin')) |
| |
| os.environ['BINARYEN'] = os.getcwd() |
| |
| def fetch_waterfall(): |
| rev = open(os.path.join('test', 'revision')).read().strip() |
| try: |
| local_rev = open(os.path.join('test', 'local-revision')).read().strip() |
| except: |
| local_rev = None |
| if local_rev == rev: return |
| # fetch it |
| basename = 'wasm-binaries-' + rev + '.tbz2' |
| url = 'https://storage.googleapis.com/wasm-llvm/builds/git/' + basename |
| print '(downloading waterfall %s: %s)' % (rev, url) |
| downloaded = urllib2.urlopen(url).read().strip() |
| fullname = os.path.join('test', basename) |
| open(fullname, 'wb').write(downloaded) |
| print '(unpacking)' |
| if os.path.exists(WATERFALL_BUILD_DIR): |
| shutil.rmtree(WATERFALL_BUILD_DIR) |
| os.mkdir(WATERFALL_BUILD_DIR) |
| subprocess.check_call(['tar', '-xf', os.path.abspath(fullname)], cwd=WATERFALL_BUILD_DIR) |
| print '(noting local revision)' |
| with open(os.path.join('test', 'local-revision'), 'w') as o: o.write(rev) |
| |
| has_vanilla_llvm = False |
| |
| def setup_waterfall(): |
| # if we can use the waterfall llvm, do so |
| global has_vanilla_llvm |
| CLANG = os.path.join(BIN_DIR, 'clang') |
| print 'trying waterfall clang at', CLANG |
| try: |
| subprocess.check_call([CLANG, '-v']) |
| has_vanilla_llvm = True |
| print '...success' |
| except Exception, e: |
| warn('could not run vanilla LLVM from waterfall: ' + str(e) + ', looked for clang at ' + CLANG) |
| |
| fetch_waterfall() |
| setup_waterfall() |
| |
| if only_prepare: |
| print 'waterfall is fetched and setup, exiting since --only-prepare' |
| sys.exit(0) |
| |
| # external tools |
| |
| has_node = False |
| try: |
| subprocess.check_call(['nodejs', '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| has_node = 'nodejs' |
| except: |
| try: |
| subprocess.check_call(['node', '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| has_node = 'node' |
| except: |
| pass |
| |
| has_mozjs = False |
| try: |
| subprocess.check_call(['mozjs', '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| has_mozjs = True |
| except: |
| pass |
| |
| has_emcc = False |
| try: |
| subprocess.check_call(['emcc', '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| has_emcc = True |
| except: |
| pass |
| |
| has_vanilla_emcc = False |
| try: |
| subprocess.check_call([os.path.join('test', 'emscripten', 'emcc'), '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| has_vanilla_emcc = True |
| except: |
| pass |
| |
| # utilities |
| |
| def delete_from_orbit(filename): # removes a file if it exists, using any and all ways of doing so |
| try: |
| os.unlink(filename) |
| except: |
| pass |
| if not os.path.exists(filename): return |
| try: |
| shutil.rmtree(filename, ignore_errors=True) |
| except: |
| pass |
| if not os.path.exists(filename): return |
| try: |
| os.chmod(filename, os.stat(filename).st_mode | stat.S_IWRITE) |
| def remove_readonly_and_try_again(func, path, exc_info): |
| if not (os.stat(path).st_mode & stat.S_IWRITE): |
| os.chmod(path, os.stat(path).st_mode | stat.S_IWRITE) |
| func(path) |
| else: |
| raise |
| shutil.rmtree(filename, onerror=remove_readonly_and_try_again) |
| except: |
| pass |
| |
| def fail(actual, expected): |
| raise Exception("incorrect output, diff:\n\n%s" % ( |
| ''.join([a.rstrip()+'\n' for a in difflib.unified_diff(expected.split('\n'), actual.split('\n'), fromfile='expected', tofile='actual')])[:] |
| )) |
| |
| def fail_if_not_identical(actual, expected): |
| if expected != actual: |
| fail(actual, expected) |
| |
| def fail_if_not_contained(actual, expected): |
| if expected not in actual: |
| fail(actual, expected) |
| |
| if len(requested) == 0: |
| tests = sorted(os.listdir('test')) |
| else: |
| tests = requested[:] |
| |
| if not interpreter: |
| warn('no interpreter provided (did not test spec interpreter validation)') |
| if not has_node: |
| warn('no node found (did not check proper js form)') |
| if not has_mozjs: |
| warn('no mozjs found (did not check native wasm support nor asm.js validation)') |
| if not has_emcc: |
| warn('no emcc found (did not check non-vanilla emscripten/binaryen integration)') |
| if not has_vanilla_emcc: |
| warn('no functional emcc submodule found') |
| |
| # check utilities |
| |
| def binary_format_check(wast, verify_final_result=True): |
| # checks we can convert the wast to binary and back |
| |
| print ' (binary format check)' |
| cmd = [os.path.join('bin', 'wasm-as'), wast, '-o', 'a.wasm'] |
| print ' ', ' '.join(cmd) |
| if os.path.exists('a.wasm'): os.unlink('a.wasm') |
| subprocess.check_call(cmd, stdout=subprocess.PIPE) |
| assert os.path.exists('a.wasm') |
| |
| cmd = [os.path.join('bin', 'wasm-dis'), 'a.wasm', '-o', 'ab.wast'] |
| print ' ', ' '.join(cmd) |
| if os.path.exists('ab.wast'): os.unlink('ab.wast') |
| subprocess.check_call(cmd, stdout=subprocess.PIPE) |
| assert os.path.exists('ab.wast') |
| |
| # make sure it is a valid wast |
| cmd = [os.path.join('bin', 'wasm-opt'), 'ab.wast'] |
| print ' ', ' '.join(cmd) |
| subprocess.check_call(cmd, stdout=subprocess.PIPE) |
| |
| if verify_final_result: |
| expected = open(wast + '.fromBinary').read() |
| actual = open('ab.wast').read() |
| if actual != expected: |
| fail(actual, expected) |
| |
| return 'ab.wast' |
| |
| def minify_check(wast, verify_final_result=True): |
| # checks we can parse minified output |
| |
| print ' (minify check)' |
| cmd = [os.path.join('bin', 'wasm-opt'), wast, '--print-minified'] |
| print ' ', ' '.join(cmd) |
| subprocess.check_call([os.path.join('bin', 'wasm-opt'), wast, '--print-minified'], stdout=open('a.wasm', 'w'), stderr=subprocess.PIPE) |
| assert os.path.exists('a.wasm') |
| subprocess.check_call([os.path.join('bin', 'wasm-opt'), 'a.wasm', '--print-minified'], stdout=open('b.wasm', 'w'), stderr=subprocess.PIPE) |
| assert os.path.exists('b.wasm') |
| if verify_final_result: |
| expected = open('a.wasm').read() |
| actual = open('b.wasm').read() |
| if actual != expected: |
| fail(actual, expected) |
| if os.path.exists('a.wasm'): os.unlink('a.wasm') |
| if os.path.exists('b.wasm'): os.unlink('b.wasm') |
| |
| # tests |
| |
| print '[ checking --help is useful... ]\n' |
| |
| not_executable_suffix = ['.txt', '.js'] |
| executables = sorted(filter(lambda x: not any(x.endswith(s) for s in |
| not_executable_suffix), |
| os.listdir('bin'))) |
| for e in executables: |
| print '.. %s --help' % e |
| out, err = subprocess.Popen([os.path.join('bin', e), '--help'], |
| stdout=subprocess.PIPE, |
| stderr=subprocess.PIPE).communicate() |
| assert len(out) == 0, 'Expected no stdout, got:\n%s' % out |
| assert e in err, 'Expected help to contain program name, got:\n%s' % err |
| assert len(err.split('\n')) > 8, 'Expected some help, got:\n%s' % err |
| |
| print '\n[ checking wasm-opt -o notation... ]\n' |
| |
| wast = os.path.join('test', 'hello_world.wast') |
| delete_from_orbit('a.wast') |
| cmd = [os.path.join('bin', 'wasm-opt'), wast, '-o', 'a.wast'] |
| run_command(cmd) |
| fail_if_not_identical(open('a.wast').read(), open(wast).read()) |
| |
| print '\n[ checking wasm-opt passes... ]\n' |
| |
| for t in sorted(os.listdir(os.path.join('test', 'passes'))): |
| if t.endswith('.wast'): |
| print '..', t |
| passname = os.path.basename(t).replace('.wast', '') |
| opts = ['-O'] if passname == 'O' else ['--' + p for p in passname.split('_')] |
| t = os.path.join('test', 'passes', t) |
| actual = '' |
| for module, asserts in split_wast(t): |
| assert len(asserts) == 0 |
| with open('split.wast', 'w') as o: o.write(module) |
| cmd = [os.path.join('bin', 'wasm-opt')] + opts + ['split.wast', '--print'] |
| actual += run_command(cmd) |
| # also check debug mode output is valid |
| debugged = run_command(cmd + ['--debug'], stderr=subprocess.PIPE) |
| fail_if_not_contained(actual, debugged) |
| fail_if_not_identical(actual, open(os.path.join('test', 'passes', passname + '.txt')).read()) |
| |
| print '[ checking asm2wasm testcases... ]\n' |
| |
| for asm in tests: |
| if asm.endswith('.asm.js'): |
| for precise in [1, 0]: |
| for opts in [1, 0]: |
| cmd = [os.path.join('bin', 'asm2wasm'), os.path.join('test', asm)] |
| wasm = asm.replace('.asm.js', '.fromasm') |
| if not precise: |
| cmd += ['--imprecise'] |
| wasm += '.imprecise' |
| if not opts: |
| cmd += ['--no-opts'] |
| wasm += '.no-opts' |
| if precise and opts: |
| # test mem init importing |
| open('a.mem', 'wb').write(asm) |
| cmd += ['--mem-init=a.mem'] |
| wasm = os.path.join('test', wasm) |
| print '..', asm, wasm |
| actual = run_command(cmd) |
| |
| # verify output |
| if not os.path.exists(wasm): |
| raise Exception('output .wast file %s does not exist' % wasm) |
| expected = open(wasm).read() |
| if actual != expected: |
| fail(actual, expected) |
| |
| binary_format_check(wasm, verify_final_result=False) |
| |
| # verify in wasm |
| if interpreter: |
| # remove imports, spec interpreter doesn't know what to do with them |
| subprocess.check_call([os.path.join('bin', 'wasm-opt'), '--remove-imports', wasm], stdout=open('ztemp.wast', 'w'), stderr=subprocess.PIPE) |
| proc = subprocess.Popen([interpreter, 'ztemp.wast'], stderr=subprocess.PIPE) |
| out, err = proc.communicate() |
| if proc.returncode != 0: |
| try: # to parse the error |
| reported = err.split(':')[1] |
| start, end = reported.split('-') |
| start_line, start_col = map(int, start.split('.')) |
| lines = open('ztemp.wast').read().split('\n') |
| print |
| print '='*80 |
| print lines[start_line-1] |
| print (' '*(start_col-1)) + '^' |
| print (' '*(start_col-2)) + '/_\\' |
| print '='*80 |
| print err |
| except Exception, e: |
| raise Exception('wasm interpreter error: ' + err) # failed to pretty-print |
| raise Exception('wasm interpreter error') |
| |
| print '\n[ checking wasm-opt parsing & printing... ]\n' |
| |
| for t in sorted(os.listdir(os.path.join('test', 'print'))): |
| if t.endswith('.wast'): |
| print '..', t |
| wasm = os.path.basename(t).replace('.wast', '') |
| cmd = [os.path.join('bin', 'wasm-opt'), os.path.join('test', 'print', t), '--print'] |
| print ' ', ' '.join(cmd) |
| actual, err = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE).communicate() |
| fail_if_not_identical(actual, open(os.path.join('test', 'print', wasm + '.txt')).read()) |
| cmd = [os.path.join('bin', 'wasm-opt'), os.path.join('test', 'print', t), '--print-minified'] |
| print ' ', ' '.join(cmd) |
| actual, err = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE).communicate() |
| fail_if_not_identical(actual.strip(), open(os.path.join('test', 'print', wasm + '.minified.txt')).read().strip()) |
| |
| print '\n[ checking wasm-opt testcases... ]\n' |
| |
| for t in tests: |
| if t.endswith('.wast') and not t.startswith('spec'): |
| print '..', t |
| t = os.path.join('test', t) |
| cmd = [os.path.join('bin', 'wasm-opt'), t, '--print'] |
| actual = run_command(cmd) |
| actual = actual.replace('printing before:\n', '') |
| |
| expected = open(t).read() |
| if actual != expected: |
| fail(actual, expected) |
| |
| binary_format_check(t) |
| minify_check(t) |
| |
| print '\n[ checking wasm-shell spec testcases... ]\n' |
| |
| if len(requested) == 0: |
| BLACKLIST = ['memory.wast'] # FIXME we support old and new memory formats, for now, until 0xc, and so can't pass this old-style test |
| spec_tests = [os.path.join('spec', t) for t in sorted(os.listdir(os.path.join('test', 'spec'))) if t not in BLACKLIST] |
| else: |
| spec_tests = requested[:] |
| |
| for t in spec_tests: |
| if t.startswith('spec') and t.endswith('.wast'): |
| print '..', t |
| wast = os.path.join('test', t) |
| |
| def run_spec_test(wast): |
| cmd = [os.path.join('bin', 'wasm-shell'), wast] |
| # we must skip the stack machine portions of spec tests or apply other extra args |
| extra = { |
| 'call.wast': ['--skip=207'], |
| 'call_indirect.wast': ['--skip=302'], |
| 'nop.wast': ['--skip=3'], |
| 'stack.wast': ['--skip=0'], |
| } |
| cmd = cmd + (extra.get(os.path.basename(wast)) or []) |
| return run_command(cmd, stderr=subprocess.PIPE) |
| |
| def check_expected(actual, expected): |
| if expected and os.path.exists(expected): |
| expected = open(expected).read() |
| # fix it up, our pretty (i32.const 83) must become compared to a homely 83 : i32 |
| def fix(x): |
| x = x.strip() |
| if not x: return x |
| v, t = x.split(' : ') |
| if v.endswith('.'): v = v[:-1] # remove trailing '.' |
| return '(' + t + '.const ' + v + ')' |
| expected = '\n'.join(map(fix, expected.split('\n'))) |
| print ' (using expected output)' |
| actual = actual.strip() |
| expected = expected.strip() |
| if actual != expected: |
| fail(actual, expected) |
| |
| expected = os.path.join('test', 'spec', 'expected-output', os.path.basename(wast) + '.log') |
| |
| # some spec tests should fail (actual process failure, not just assert_invalid) |
| try: |
| actual = run_spec_test(wast) |
| except Exception, e: |
| if ('wasm-validator error' in str(e) or 'parse exception' in str(e)) and '.fail.' in t: |
| print '<< test failed as expected >>' |
| continue # don't try all the binary format stuff TODO |
| else: |
| raise e |
| |
| check_expected(actual, expected) |
| |
| # we must ignore some binary format splits |
| splits_to_skip = { |
| 'call.wast': [1], |
| 'call_indirect.wast': [1], |
| 'nop.wast': [0], |
| 'stack.wast': [0], |
| } |
| |
| # check binary format. here we can verify execution of the final result, no need for an output verification |
| split_num = 0 |
| if os.path.basename(wast) not in []: # avoid some tests with things still being sorted out in the spec |
| actual = '' |
| for module, asserts in split_wast(wast): |
| skip = splits_to_skip.get(os.path.basename(wast)) or [] |
| if split_num in skip: |
| print ' skipping split module', split_num - 1 |
| split_num += 1 |
| continue |
| print ' testing split module', split_num |
| split_num += 1 |
| with open('split.wast', 'w') as o: o.write(module + '\n' + '\n'.join(asserts)) |
| run_spec_test('split.wast') # before binary stuff - just check it's still ok split out |
| result_wast = binary_format_check('split.wast', verify_final_result=False) |
| # add the asserts, and verify that the test still passes |
| open(result_wast, 'a').write('\n' + '\n'.join(asserts)) |
| actual += run_spec_test(result_wast) |
| # compare all the outputs to the expected output |
| check_expected(actual, os.path.join('test', 'spec', 'expected-output', os.path.basename(wast) + '.log')) |
| |
| if has_node: |
| print '\n[ checking binaryen.js testcases... ]\n' |
| |
| for s in sorted(os.listdir(os.path.join('test', 'binaryen.js'))): |
| if not s.endswith('.js'): continue |
| print s |
| f = open('a.js', 'w') |
| f.write(open(os.path.join('bin', 'binaryen.js')).read()) |
| f.write(open(os.path.join('test', 'binaryen.js', s)).read()) |
| f.close() |
| cmd = [has_node, 'a.js'] |
| out = run_command(cmd) |
| expected = open(os.path.join('test', 'binaryen.js', s + '.txt')).read() |
| if expected not in out: |
| fail(out, expected) |
| |
| if 0: # TODO: figure out the story. will .s files have drops? |
| print '\n[ checking .s testcases... ]\n' |
| |
| for dot_s_dir in ['dot_s', 'llvm_autogenerated']: |
| for s in sorted(os.listdir(os.path.join('test', dot_s_dir))): |
| if not s.endswith('.s'): continue |
| if s in ['indirect-import.s', 'memops.s', 'byval.s', 'cfg-stackify.s', 'dead-vreg.s', 'i128.s', 'legalize.s', 'mem-intrinsics.s', 'offset.s', 'reg-stackify.s', 'store-results.s', 'userstack.s', 'varargs.s']: continue # tests with invalid drop() code (use return of store) |
| print '..', s |
| wasm = s.replace('.s', '.wast') |
| full = os.path.join('test', dot_s_dir, s) |
| stack_alloc = ['--allocate-stack=1024'] if dot_s_dir == 'llvm_autogenerated' else [] |
| cmd = [os.path.join('bin', 's2wasm'), full, '--emscripten-glue'] + stack_alloc |
| if s.startswith('start_'): |
| cmd.append('--start') |
| actual = run_command(cmd) |
| |
| # verify output |
| expected_file = os.path.join('test', dot_s_dir, wasm) |
| if not os.path.exists(expected_file): |
| print actual |
| raise Exception('output ' + expected_file + ' does not exist') |
| expected = open(expected_file).read() |
| if actual != expected: |
| fail(actual, expected) |
| |
| # verify with options |
| cmd = [os.path.join('bin', 's2wasm'), full, '--global-base=1024'] + stack_alloc |
| run_command(cmd) |
| |
| # run wasm-shell on the .wast to verify that it parses |
| cmd = [os.path.join('bin', 'wasm-shell'), expected_file] |
| run_command(cmd) |
| |
| print '\n[ running linker tests... ]\n' |
| # The {main,foo,bar,baz}.s files were created by running clang over the respective |
| # c files. The foobar.bar archive was created by running: |
| # llvm-ar -format=gnu rc foobar.a quux.s foo.s bar.s baz.s |
| s2wasm = os.path.join('bin', 's2wasm') |
| cmd = [s2wasm, os.path.join('test', 'linker', 'main.s'), '-l', os.path.join('test', 'linker', 'archive', 'foobar.a')] |
| output = run_command(cmd) |
| # foo should come from main.s and return 42 |
| fail_if_not_contained(output, '(func $foo') |
| fail_if_not_contained(output, '(i32.const 42)') |
| # bar should be linked in from bar.s |
| fail_if_not_contained(output, '(func $bar') |
| # quux should be linked in from bar.s even though it comes before bar.s in the archive |
| fail_if_not_contained(output, '(func $quux') |
| # baz should not be linked in at all |
| if 'baz' in output: |
| raise Exception('output should not contain "baz": ' + output) |
| |
| # Test an archive using a string table |
| cmd = [s2wasm, os.path.join('test', 'linker', 'main.s'), '-l', os.path.join('test', 'linker', 'archive', 'barlong.a')] |
| output = run_command(cmd) |
| # bar should be linked from the archive |
| fail_if_not_contained(output, '(func $bar') |
| |
| # Test exporting memory growth function |
| cmd = [s2wasm, os.path.join('test', 'linker', 'main.s'), '--emscripten-glue', '--allow-memory-growth'] |
| output = run_command(cmd) |
| fail_if_not_contained(output, '(export "__growWasmMemory" $__growWasmMemory)') |
| fail_if_not_contained(output, '(func $__growWasmMemory (param $newSize i32)') |
| |
| print '\n[ running validation tests... ]\n' |
| wasm_as = os.path.join('bin', 'wasm-as') |
| # Ensure the tests validate by default |
| cmd = [wasm_as, os.path.join('test', 'validator', 'invalid_export.wast')] |
| run_command(cmd) |
| cmd = [wasm_as, os.path.join('test', 'validator', 'invalid_import.wast')] |
| run_command(cmd) |
| cmd = [wasm_as, '--validate=web', os.path.join('test', 'validator', 'invalid_export.wast')] |
| run_command(cmd, expected_status=1) |
| cmd = [wasm_as, '--validate=web', os.path.join('test', 'validator', 'invalid_import.wast')] |
| run_command(cmd, expected_status=1) |
| cmd = [wasm_as, '--validate=none', os.path.join('test', 'validator', 'invalid_return.wast')] |
| run_command(cmd) |
| |
| if torture and 0: |
| |
| print '\n[ checking torture testcases... ]\n' |
| |
| unexpected_result_count = 0 |
| |
| import test.waterfall.src.link_assembly_files as link_assembly_files |
| s2wasm_torture_out = os.path.abspath(os.path.join('test', 's2wasm-torture-out')) |
| if os.path.isdir(s2wasm_torture_out): |
| shutil.rmtree(s2wasm_torture_out) |
| os.mkdir(s2wasm_torture_out) |
| unexpected_result_count += link_assembly_files.run( |
| linker=os.path.abspath(os.path.join('bin', 's2wasm')), |
| files=os.path.abspath(os.path.join('test', 'torture-s', '*.s')), |
| fails=os.path.abspath(os.path.join('test', 's2wasm_known_gcc_test_failures.txt')), |
| out=s2wasm_torture_out) |
| assert os.path.isdir(s2wasm_torture_out), 'Expected output directory %s' % s2wasm_torture_out |
| |
| import test.waterfall.src.execute_files as execute_files |
| unexpected_result_count += execute_files.run( |
| runner=os.path.abspath(os.path.join('bin', 'wasm-shell')), |
| files=os.path.abspath(os.path.join(s2wasm_torture_out, '*.wast')), |
| fails=os.path.abspath(os.path.join('test', 's2wasm_known_binaryen_shell_test_failures.txt')), |
| out='', |
| wasmjs='') |
| |
| shutil.rmtree(s2wasm_torture_out) |
| if unexpected_result_count: |
| fail('%s failures' % unexpected_result_count, '0 failures') |
| |
| if has_vanilla_emcc and has_vanilla_llvm and 0: |
| |
| print '\n[ checking emcc WASM_BACKEND testcases...]\n' |
| |
| try: |
| if has_vanilla_llvm: |
| os.environ['LLVM'] = BIN_DIR # use the vanilla LLVM |
| else: |
| # if we did not set vanilla llvm, then we must set this env var to make emcc use the wasm backend. |
| # (if we are using vanilla llvm, things should just work) |
| print '(not using vanilla llvm, so setting env var to tell emcc to use wasm backend)' |
| os.environ['EMCC_WASM_BACKEND'] = '1' |
| VANILLA_EMCC = os.path.join('test', 'emscripten', 'emcc') |
| # run emcc to make sure it sets itself up properly, if it was never run before |
| command = [VANILLA_EMCC, '-v'] |
| print '____' + ' '.join(command) |
| subprocess.check_call(command) |
| |
| for c in sorted(os.listdir(os.path.join('test', 'wasm_backend'))): |
| if not c.endswith('cpp'): continue |
| print '..', c |
| base = c.replace('.cpp', '').replace('.c', '') |
| expected = open(os.path.join('test', 'wasm_backend', base + '.txt')).read() |
| for opts in [[], ['-O1'], ['-O2']]: |
| only = [] if opts != ['-O1'] or '_only' not in base else ['-s', 'ONLY_MY_CODE=1'] # only my code is a hack we used early in wasm backend dev, which somehow worked, but only with -O1 |
| command = [VANILLA_EMCC, '-o', 'a.wasm.js', os.path.join('test', 'wasm_backend', c)] + opts + only |
| print '....' + ' '.join(command) |
| if os.path.exists('a.wasm.js'): os.unlink('a.wasm.js') |
| subprocess.check_call(command) |
| if has_node: |
| print ' (check in node)' |
| cmd = [has_node, 'a.wasm.js'] |
| out = run_command(cmd) |
| if out.strip() != expected.strip(): |
| fail(out, expected) |
| finally: |
| if has_vanilla_llvm: |
| del os.environ['LLVM'] |
| else: |
| del os.environ['EMCC_WASM_BACKEND'] |
| |
| print '\n[ checking example testcases... ]\n' |
| |
| for t in sorted(os.listdir(os.path.join('test', 'example'))): |
| output_file = os.path.join('bin', 'example') |
| cmd = ['-Isrc', '-g', '-lasmjs', '-lsupport', '-Llib/.', '-pthread', '-o', output_file] |
| if t.endswith('.txt'): |
| # check if there is a trace in the file, if so, we should build it |
| out = subprocess.Popen([os.path.join('scripts', 'clean_c_api_trace.py'), os.path.join('test', 'example', t)], stdout=subprocess.PIPE).communicate()[0] |
| if len(out) == 0: |
| print ' (no trace in ', t, ')' |
| continue |
| print ' (will check trace in ', t, ')' |
| src = 'trace.cpp' |
| with open(src, 'w') as o: o.write(out) |
| expected = os.path.join('test', 'example', t + '.txt') |
| else: |
| src = os.path.join('test', 'example', t) |
| expected = os.path.join('test', 'example', '.'.join(t.split('.')[:-1]) + '.txt') |
| if src.endswith(('.c', '.cpp')): |
| # build the C file separately |
| extra = [os.environ.get('CC') or 'gcc', |
| src, '-c', '-o', 'example.o', |
| '-Isrc', '-g', '-Llib/.', '-pthread'] |
| print 'build: ', ' '.join(extra) |
| subprocess.check_call(extra) |
| # Link against the binaryen C library DSO, using an executable-relative rpath |
| cmd = ['example.o', '-lbinaryen'] + cmd + ['-Wl,-rpath=$ORIGIN/../lib'] |
| else: |
| continue |
| print ' ', t, src, expected |
| if os.environ.get('COMPILER_FLAGS'): |
| for f in os.environ.get('COMPILER_FLAGS').split(' '): |
| cmd.append(f) |
| cmd = [os.environ.get('CXX') or 'g++', '-std=c++11'] + cmd |
| try: |
| print 'link: ', ' '.join(cmd) |
| subprocess.check_call(cmd) |
| print 'run...', output_file |
| proc = subprocess.Popen([output_file], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| actual, err = proc.communicate() |
| assert proc.returncode == 0, [proc.returncode, actual, err] |
| finally: |
| os.remove(output_file) |
| if sys.platform == 'darwin': |
| # Also removes debug directory produced on Mac OS |
| shutil.rmtree(output_file + '.dSYM') |
| |
| expected = open(expected).read() |
| if actual != expected: |
| fail(actual, expected) |
| |
| if has_emcc: |
| |
| if has_mozjs and 0: |
| |
| print '\n[ checking native wasm support ]\n' |
| |
| command = ['emcc', '-o', 'a.wasm.js', '-s', 'BINARYEN=1', os.path.join('test', 'hello_world.c'), '-s', 'BINARYEN_METHOD="native-wasm"', '-s', 'BINARYEN_SCRIPTS="spidermonkify.py"'] |
| print ' '.join(command) |
| subprocess.check_call(command) |
| |
| cmd = ['mozjs', 'a.wasm.js'] |
| out = run_command(cmd) |
| assert 'hello, world!' in out, out |
| |
| proc = subprocess.Popen([has_node, 'a.wasm.js'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| out, err = proc.communicate() |
| assert proc.returncode != 0, 'should fail on no wasm support' |
| assert 'no native wasm support detected' in err, err |
| |
| print '\n[ checking wasm.js methods... ]\n' |
| |
| for method_init in ['interpret-asm2wasm', 'interpret-s-expr', 'asmjs', 'interpret-binary', 'asmjs,interpret-binary', 'interpret-binary,asmjs']: |
| # check success and failure for simple modes, only success for combined/fallback ones |
| for success in [1, 0] if ',' not in method_init else [1]: |
| method = method_init |
| command = ['emcc', '-o', 'a.wasm.js', '-s', 'BINARYEN=1', os.path.join('test', 'hello_world.c') ] |
| command += ['-s', 'BINARYEN_METHOD="' + method + '"'] |
| print method, ' : ', ' '.join(command), ' => ', success |
| subprocess.check_call(command) |
| |
| see_polyfill = 'var WasmJS = ' in open('a.wasm.js').read() |
| |
| if method and 'interpret' not in method: |
| assert not see_polyfill, 'verify polyfill was not added - we specified a method, and it does not need it' |
| else: |
| assert see_polyfill, 'we need the polyfill' |
| |
| def break_cashew(): |
| asm = open('a.wasm.asm.js').read() |
| asm = asm.replace('"almost asm"', '"use asm"; var not_in_asm = [].length + (true || { x: 5 }.x);') |
| asm = asm.replace("'almost asm'", '"use asm"; var not_in_asm = [].length + (true || { x: 5 }.x);') |
| with open('a.wasm.asm.js', 'w') as o: o.write(asm) |
| if method.startswith('interpret-asm2wasm'): |
| os.unlink('a.wasm.wast') # we should not need the .wast |
| if not success: |
| break_cashew() # we need cashew |
| elif method.startswith('interpret-s-expr'): |
| os.unlink('a.wasm.asm.js') # we should not need the .asm.js |
| if not success: |
| os.unlink('a.wasm.wast') |
| elif method.startswith('asmjs'): |
| os.unlink('a.wasm.wast') # we should not need the .wast |
| break_cashew() # we don't use cashew, so ok to break it |
| if not success: |
| os.unlink('a.wasm.js') |
| elif method.startswith('interpret-binary'): |
| os.unlink('a.wasm.wast') # we should not need the .wast |
| os.unlink('a.wasm.asm.js') # we should not need the .asm.js |
| if not success: |
| os.unlink('a.wasm.wasm') |
| else: |
| 1/0 |
| if has_node: |
| proc = subprocess.Popen([has_node, 'a.wasm.js'], stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| out, err = proc.communicate() |
| if success: |
| assert proc.returncode == 0, err |
| assert 'hello, world!' in out, out |
| else: |
| assert proc.returncode != 0, err |
| assert 'hello, world!' not in out, out |
| |
| print '\n[ checking wasm.js testcases... ]\n' |
| |
| for c in tests: |
| if c.endswith(('.c', '.cpp')): |
| print '..', c |
| base = c.replace('.cpp', '').replace('.c', '') |
| post = base + '.post.js' |
| try: |
| post = open(os.path.join('test', post)).read() |
| except: |
| post = None |
| expected = open(os.path.join('test', base + '.txt')).read() |
| emcc = os.path.join('test', base + '.emcc') |
| extra = [] |
| if os.path.exists(emcc): |
| extra = json.loads(open(emcc).read()) |
| if os.path.exists('a.normal.js'): os.unlink('a.normal.js') |
| for opts in [[], ['-O1'], ['-O2'], ['-O3'], ['-Oz']]: |
| for method in ['interpret-asm2wasm', 'interpret-s-expr', 'interpret-binary']: |
| command = ['emcc', '-o', 'a.wasm.js', '-s', 'BINARYEN=1', os.path.join('test', c)] + opts + extra |
| command += ['-s', 'BINARYEN_METHOD="' + method + '"'] |
| print '....' + ' '.join(command) |
| subprocess.check_call(command, stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| if post: |
| open('a.wasm.js', 'a').write(post) |
| else: |
| print ' (no post)' |
| for which in ['wasm']: |
| print '......', which |
| try: |
| args = json.loads(open(os.path.join('test', base + '.args')).read()) |
| except: |
| args = [] |
| print ' (no args)' |
| |
| def execute(): |
| if has_node: |
| cmd = [has_node, 'a.' + which + '.js'] + args |
| out = run_command(cmd) |
| if out.strip() != expected.strip(): |
| fail(out, expected) |
| |
| execute() |
| |
| if method in ['interpret-asm2wasm', 'interpret-s-expr']: |
| # binary and back |
| shutil.copyfile('a.wasm.wast', 'a.wasm.original.wast') |
| recreated = binary_format_check('a.wasm.wast', verify_final_result=False) |
| shutil.copyfile(recreated, 'a.wasm.wast') |
| execute() |
| |
| print '\n[ success! ]' |
| |
| if warnings: |
| print '\n' + '\n'.join(warnings) |