| /* |
| * Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009 Apple Inc. All rights reserved. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Library General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Library General Public License for more details. |
| * |
| * You should have received a copy of the GNU Library General Public License |
| * along with this library; see the file COPYING.LIB. If not, write to |
| * the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, |
| * Boston, MA 02110-1301, USA. |
| */ |
| |
| #include "config.h" |
| #include "InlineFlowBox.h" |
| |
| #include "CSSPropertyNames.h" |
| #include "Document.h" |
| #include "EllipsisBox.h" |
| #include "Font.h" |
| #include "GraphicsContext.h" |
| #include "InlineTextBox.h" |
| #include "HitTestResult.h" |
| #include "RenderBlock.h" |
| #include "RenderInline.h" |
| #include "RenderLayer.h" |
| #include "RenderListMarker.h" |
| #include "RenderRubyBase.h" |
| #include "RenderRubyRun.h" |
| #include "RenderRubyText.h" |
| #include "RenderTableCell.h" |
| #include "RenderView.h" |
| #include "RootInlineBox.h" |
| #include "Text.h" |
| #include <math.h> |
| |
| namespace WebCore { |
| |
| struct SameSizeAsInlineFlowBox : public InlineBox { |
| void* pointers[5]; |
| uint32_t bitfields : 23; |
| }; |
| |
| COMPILE_ASSERT(sizeof(InlineFlowBox) == sizeof(SameSizeAsInlineFlowBox), InlineFlowBox_should_stay_small); |
| |
| #if !ASSERT_WITH_SECURITY_IMPLICATION_DISABLED |
| |
| InlineFlowBox::~InlineFlowBox() |
| { |
| setHasBadChildList(); |
| } |
| |
| void InlineFlowBox::setHasBadChildList() |
| { |
| assertNotDeleted(); |
| if (m_hasBadChildList) |
| return; |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) |
| child->setHasBadParent(); |
| m_hasBadChildList = true; |
| } |
| |
| #endif |
| |
| LayoutUnit InlineFlowBox::getFlowSpacingLogicalWidth() |
| { |
| LayoutUnit totWidth = marginBorderPaddingLogicalLeft() + marginBorderPaddingLogicalRight(); |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->isInlineFlowBox()) |
| totWidth += toInlineFlowBox(curr)->getFlowSpacingLogicalWidth(); |
| } |
| return totWidth; |
| } |
| |
| static void setHasTextDescendantsOnAncestors(InlineFlowBox* box) |
| { |
| while (box && !box->hasTextDescendants()) { |
| box->setHasTextDescendants(); |
| box = box->parent(); |
| } |
| } |
| |
| void InlineFlowBox::addToLine(InlineBox* child) |
| { |
| ASSERT(!child->parent()); |
| ASSERT(!child->nextOnLine()); |
| ASSERT(!child->prevOnLine()); |
| checkConsistency(); |
| |
| child->setParent(this); |
| if (!m_firstChild) { |
| m_firstChild = child; |
| m_lastChild = child; |
| } else { |
| m_lastChild->setNextOnLine(child); |
| child->setPrevOnLine(m_lastChild); |
| m_lastChild = child; |
| } |
| child->setIsFirstLine(isFirstLine()); |
| child->setIsHorizontal(isHorizontal()); |
| if (child->behavesLikeText()) { |
| if (child->renderer().parent() == &renderer()) |
| m_hasTextChildren = true; |
| setHasTextDescendantsOnAncestors(this); |
| } else if (child->isInlineFlowBox()) { |
| if (toInlineFlowBox(child)->hasTextDescendants()) |
| setHasTextDescendantsOnAncestors(this); |
| } |
| |
| if (descendantsHaveSameLineHeightAndBaseline() && !child->renderer().isOutOfFlowPositioned()) { |
| const RenderStyle& parentStyle = lineStyle(); |
| const RenderStyle& childStyle = child->lineStyle(); |
| bool shouldClearDescendantsHaveSameLineHeightAndBaseline = false; |
| if (child->renderer().isReplaced()) |
| shouldClearDescendantsHaveSameLineHeightAndBaseline = true; |
| else if (child->behavesLikeText()) { |
| if (child->renderer().isLineBreak() || child->renderer().parent() != &renderer()) { |
| if (!parentStyle.font().fontMetrics().hasIdenticalAscentDescentAndLineGap(childStyle.font().fontMetrics()) |
| || parentStyle.lineHeight() != childStyle.lineHeight() |
| || (parentStyle.verticalAlign() != BASELINE && !isRootInlineBox()) || childStyle.verticalAlign() != BASELINE) |
| shouldClearDescendantsHaveSameLineHeightAndBaseline = true; |
| } |
| if (childStyle.hasTextCombine() || childStyle.textEmphasisMark() != TextEmphasisMarkNone) |
| shouldClearDescendantsHaveSameLineHeightAndBaseline = true; |
| } else { |
| if (child->renderer().isLineBreak()) { |
| // FIXME: This is dumb. We only turn off because current layout test results expect the <br> to be 0-height on the baseline. |
| // Other than making a zillion tests have to regenerate results, there's no reason to ditch the optimization here. |
| shouldClearDescendantsHaveSameLineHeightAndBaseline = child->renderer().isBR(); |
| } else { |
| ASSERT(isInlineFlowBox()); |
| InlineFlowBox* childFlowBox = toInlineFlowBox(child); |
| // Check the child's bit, and then also check for differences in font, line-height, vertical-align |
| if (!childFlowBox->descendantsHaveSameLineHeightAndBaseline() |
| || !parentStyle.font().fontMetrics().hasIdenticalAscentDescentAndLineGap(childStyle.font().fontMetrics()) |
| || parentStyle.lineHeight() != childStyle.lineHeight() |
| || (parentStyle.verticalAlign() != BASELINE && !isRootInlineBox()) || childStyle.verticalAlign() != BASELINE |
| || childStyle.hasBorder() || childStyle.hasPadding() || childStyle.hasTextCombine()) |
| shouldClearDescendantsHaveSameLineHeightAndBaseline = true; |
| } |
| } |
| |
| if (shouldClearDescendantsHaveSameLineHeightAndBaseline) |
| clearDescendantsHaveSameLineHeightAndBaseline(); |
| } |
| |
| if (!child->renderer().isOutOfFlowPositioned()) { |
| const RenderStyle& childStyle = child->lineStyle(); |
| if (child->behavesLikeText()) { |
| const RenderStyle* childStyle = &child->lineStyle(); |
| if (childStyle->letterSpacing() < 0 || childStyle->textShadow() || childStyle->textEmphasisMark() != TextEmphasisMarkNone || childStyle->textStrokeWidth()) |
| child->clearKnownToHaveNoOverflow(); |
| } else if (child->renderer().isReplaced()) { |
| const RenderBox& box = toRenderBox(child->renderer()); |
| if (box.hasRenderOverflow() || box.hasSelfPaintingLayer()) |
| child->clearKnownToHaveNoOverflow(); |
| } else if (!child->renderer().isLineBreak() && (childStyle.boxShadow() || child->boxModelObject()->hasSelfPaintingLayer() |
| || (child->renderer().isListMarker() && !toRenderListMarker(child->renderer()).isInside()) |
| || childStyle.hasBorderImageOutsets())) |
| child->clearKnownToHaveNoOverflow(); |
| |
| if (knownToHaveNoOverflow() && child->isInlineFlowBox() && !toInlineFlowBox(child)->knownToHaveNoOverflow()) |
| clearKnownToHaveNoOverflow(); |
| } |
| |
| checkConsistency(); |
| } |
| |
| void InlineFlowBox::removeChild(InlineBox* child) |
| { |
| checkConsistency(); |
| |
| if (!isDirty()) |
| dirtyLineBoxes(); |
| |
| if (child->prevLeafChild() && child->prevLeafChild()->isInlineTextBox()) { |
| if (child->isInlineTextBox()) |
| toInlineTextBox(child->prevLeafChild())->renderer().setContentIsKnownToFollow(toInlineTextBox(child)->renderer().contentIsKnownToFollow()); |
| // FIXME: Handle the case where we remove the last inline box, and it's not a text box. If we're trying to share |
| // expansion opportunites both inside and outside a replaced element (such as for ruby bases), we need to search |
| // outside the current inline box tree to determine if there is content that follows the new last inline item. |
| } |
| |
| root().childRemoved(child); |
| |
| if (child == m_firstChild) |
| m_firstChild = child->nextOnLine(); |
| if (child == m_lastChild) |
| m_lastChild = child->prevOnLine(); |
| if (child->nextOnLine()) |
| child->nextOnLine()->setPrevOnLine(child->prevOnLine()); |
| if (child->prevOnLine()) |
| child->prevOnLine()->setNextOnLine(child->nextOnLine()); |
| |
| child->setParent(0); |
| |
| checkConsistency(); |
| } |
| |
| void InlineFlowBox::deleteLine() |
| { |
| InlineBox* child = firstChild(); |
| InlineBox* next = 0; |
| while (child) { |
| ASSERT(this == child->parent()); |
| next = child->nextOnLine(); |
| #ifndef NDEBUG |
| child->setParent(0); |
| #endif |
| child->deleteLine(); |
| child = next; |
| } |
| #ifndef NDEBUG |
| m_firstChild = 0; |
| m_lastChild = 0; |
| #endif |
| |
| removeLineBoxFromRenderObject(); |
| delete this; |
| } |
| |
| void InlineFlowBox::removeLineBoxFromRenderObject() |
| { |
| toRenderInline(renderer()).lineBoxes().removeLineBox(this); |
| } |
| |
| void InlineFlowBox::extractLine() |
| { |
| if (!extracted()) |
| extractLineBoxFromRenderObject(); |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) |
| child->extractLine(); |
| } |
| |
| void InlineFlowBox::extractLineBoxFromRenderObject() |
| { |
| toRenderInline(renderer()).lineBoxes().extractLineBox(this); |
| } |
| |
| void InlineFlowBox::attachLine() |
| { |
| if (extracted()) |
| attachLineBoxToRenderObject(); |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) |
| child->attachLine(); |
| } |
| |
| void InlineFlowBox::attachLineBoxToRenderObject() |
| { |
| toRenderInline(renderer()).lineBoxes().attachLineBox(this); |
| } |
| |
| void InlineFlowBox::adjustPosition(float dx, float dy) |
| { |
| InlineBox::adjustPosition(dx, dy); |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) |
| child->adjustPosition(dx, dy); |
| if (m_overflow) |
| m_overflow->move(dx, dy); // FIXME: Rounding error here since overflow was pixel snapped, but nobody other than list markers passes non-integral values here. |
| } |
| |
| static inline bool isLastChildForRenderer(const RenderElement& ancestor, const RenderObject* child) |
| { |
| if (!child) |
| return false; |
| |
| if (child == &ancestor) |
| return true; |
| |
| const RenderObject* curr = child; |
| const RenderElement* parent = curr->parent(); |
| while (parent && (!parent->isRenderBlock() || parent->isInline())) { |
| if (parent->lastChild() != curr) |
| return false; |
| if (parent == &ancestor) |
| return true; |
| |
| curr = parent; |
| parent = curr->parent(); |
| } |
| |
| return true; |
| } |
| |
| static bool isAncestorAndWithinBlock(const RenderInline& ancestor, const RenderObject* child) |
| { |
| const RenderObject* object = child; |
| while (object && (!object->isRenderBlock() || object->isInline())) { |
| if (object == &ancestor) |
| return true; |
| object = object->parent(); |
| } |
| return false; |
| } |
| |
| void InlineFlowBox::determineSpacingForFlowBoxes(bool lastLine, bool isLogicallyLastRunWrapped, RenderObject* logicallyLastRunRenderer) |
| { |
| // All boxes start off open. They will not apply any margins/border/padding on |
| // any side. |
| bool includeLeftEdge = false; |
| bool includeRightEdge = false; |
| |
| // The root inline box never has borders/margins/padding. |
| if (parent()) { |
| const auto& inlineFlow = toRenderInline(renderer()); |
| |
| bool ltr = renderer().style().isLeftToRightDirection(); |
| |
| // Check to see if all initial lines are unconstructed. If so, then |
| // we know the inline began on this line (unless we are a continuation). |
| const auto& lineBoxList = inlineFlow.lineBoxes(); |
| if (!lineBoxList.firstLineBox()->isConstructed() && !renderer().isInlineElementContinuation()) { |
| #if ENABLE(CSS_BOX_DECORATION_BREAK) |
| if (renderer().style().boxDecorationBreak() == DCLONE) |
| includeLeftEdge = includeRightEdge = true; |
| else |
| #endif |
| if (ltr && lineBoxList.firstLineBox() == this) |
| includeLeftEdge = true; |
| else if (!ltr && lineBoxList.lastLineBox() == this) |
| includeRightEdge = true; |
| } |
| |
| if (!lineBoxList.lastLineBox()->isConstructed()) { |
| bool isLastObjectOnLine = !isAncestorAndWithinBlock(inlineFlow, logicallyLastRunRenderer) || (isLastChildForRenderer(renderer(), logicallyLastRunRenderer) && !isLogicallyLastRunWrapped); |
| |
| // We include the border under these conditions: |
| // (1) The next line was not created, or it is constructed. We check the previous line for rtl. |
| // (2) The logicallyLastRun is not a descendant of this renderer. |
| // (3) The logicallyLastRun is a descendant of this renderer, but it is the last child of this renderer and it does not wrap to the next line. |
| #if ENABLE(CSS_BOX_DECORATION_BREAK) |
| // (4) The decoration break is set to clone therefore there will be borders on every sides. |
| if (renderer().style().boxDecorationBreak() == DCLONE) |
| includeLeftEdge = includeRightEdge = true; |
| else |
| #endif |
| if (ltr) { |
| if (!nextLineBox() |
| && ((lastLine || isLastObjectOnLine) && !inlineFlow.continuation())) |
| includeRightEdge = true; |
| } else { |
| if ((!prevLineBox() || prevLineBox()->isConstructed()) |
| && ((lastLine || isLastObjectOnLine) && !inlineFlow.continuation())) |
| includeLeftEdge = true; |
| } |
| } |
| } |
| |
| setEdges(includeLeftEdge, includeRightEdge); |
| |
| // Recur into our children. |
| for (InlineBox* currChild = firstChild(); currChild; currChild = currChild->nextOnLine()) { |
| if (currChild->isInlineFlowBox()) { |
| InlineFlowBox* currFlow = toInlineFlowBox(currChild); |
| currFlow->determineSpacingForFlowBoxes(lastLine, isLogicallyLastRunWrapped, logicallyLastRunRenderer); |
| } |
| } |
| } |
| |
| float InlineFlowBox::placeBoxesInInlineDirection(float logicalLeft, bool& needsWordSpacing) |
| { |
| // Set our x position. |
| beginPlacingBoxRangesInInlineDirection(logicalLeft); |
| |
| float startLogicalLeft = logicalLeft; |
| logicalLeft += borderLogicalLeft() + paddingLogicalLeft(); |
| |
| float minLogicalLeft = startLogicalLeft; |
| float maxLogicalRight = logicalLeft; |
| |
| placeBoxRangeInInlineDirection(firstChild(), 0, logicalLeft, minLogicalLeft, maxLogicalRight, needsWordSpacing); |
| |
| logicalLeft += borderLogicalRight() + paddingLogicalRight(); |
| endPlacingBoxRangesInInlineDirection(startLogicalLeft, logicalLeft, minLogicalLeft, maxLogicalRight); |
| return logicalLeft; |
| } |
| |
| float InlineFlowBox::placeBoxRangeInInlineDirection(InlineBox* firstChild, InlineBox* lastChild, float& logicalLeft, float& minLogicalLeft, float& maxLogicalRight, bool& needsWordSpacing) |
| { |
| float totalExpansion = 0; |
| for (InlineBox* curr = firstChild; curr && curr != lastChild; curr = curr->nextOnLine()) { |
| if (curr->renderer().isText()) { |
| InlineTextBox* text = toInlineTextBox(curr); |
| RenderText& rt = text->renderer(); |
| if (rt.textLength()) { |
| if (needsWordSpacing && isSpaceOrNewline(rt.characterAt(text->start()))) |
| logicalLeft += text->lineStyle().font().wordSpacing(); |
| needsWordSpacing = !isSpaceOrNewline(rt.characterAt(text->end())); |
| } |
| text->setLogicalLeft(logicalLeft); |
| if (knownToHaveNoOverflow()) |
| minLogicalLeft = std::min(logicalLeft, minLogicalLeft); |
| logicalLeft += text->logicalWidth(); |
| totalExpansion += text->expansion(); |
| if (knownToHaveNoOverflow()) |
| maxLogicalRight = std::max(logicalLeft, maxLogicalRight); |
| } else { |
| if (curr->renderer().isOutOfFlowPositioned()) { |
| if (curr->renderer().parent()->style().isLeftToRightDirection()) |
| curr->setLogicalLeft(logicalLeft); |
| else |
| // Our offset that we cache needs to be from the edge of the right border box and |
| // not the left border box. We have to subtract |x| from the width of the block |
| // (which can be obtained from the root line box). |
| curr->setLogicalLeft(root().blockFlow().logicalWidth() - logicalLeft); |
| continue; // The positioned object has no effect on the width. |
| } |
| if (curr->renderer().isRenderInline()) { |
| InlineFlowBox* flow = toInlineFlowBox(curr); |
| logicalLeft += flow->marginLogicalLeft(); |
| if (knownToHaveNoOverflow()) |
| minLogicalLeft = std::min(logicalLeft, minLogicalLeft); |
| logicalLeft = flow->placeBoxesInInlineDirection(logicalLeft, needsWordSpacing); |
| totalExpansion += flow->expansion(); |
| if (knownToHaveNoOverflow()) |
| maxLogicalRight = std::max(logicalLeft, maxLogicalRight); |
| logicalLeft += flow->marginLogicalRight(); |
| } else if (!curr->renderer().isListMarker() || toRenderListMarker(curr->renderer()).isInside()) { |
| // The box can have a different writing-mode than the overall line, so this is a bit complicated. |
| // Just get all the physical margin and overflow values by hand based off |isVertical|. |
| LayoutUnit logicalLeftMargin = isHorizontal() ? curr->boxModelObject()->marginLeft() : curr->boxModelObject()->marginTop(); |
| LayoutUnit logicalRightMargin = isHorizontal() ? curr->boxModelObject()->marginRight() : curr->boxModelObject()->marginBottom(); |
| |
| logicalLeft += logicalLeftMargin; |
| curr->setLogicalLeft(logicalLeft); |
| if (knownToHaveNoOverflow()) |
| minLogicalLeft = std::min(logicalLeft, minLogicalLeft); |
| logicalLeft += curr->logicalWidth(); |
| if (knownToHaveNoOverflow()) |
| maxLogicalRight = std::max(logicalLeft, maxLogicalRight); |
| logicalLeft += logicalRightMargin; |
| // If we encounter any space after this inline block then ensure it is treated as the space between two words. |
| needsWordSpacing = true; |
| } |
| } |
| } |
| setExpansionWithoutGrowing(totalExpansion); |
| return logicalLeft; |
| } |
| |
| bool InlineFlowBox::requiresIdeographicBaseline(const GlyphOverflowAndFallbackFontsMap& textBoxDataMap) const |
| { |
| if (isHorizontal()) |
| return false; |
| |
| const RenderStyle& lineStyle = this->lineStyle(); |
| if (lineStyle.fontDescription().nonCJKGlyphOrientation() == NonCJKGlyphOrientationUpright |
| || lineStyle.font().primaryFont()->hasVerticalGlyphs()) |
| return true; |
| |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (curr->isInlineFlowBox()) { |
| if (toInlineFlowBox(curr)->requiresIdeographicBaseline(textBoxDataMap)) |
| return true; |
| } else { |
| if (curr->lineStyle().font().primaryFont()->hasVerticalGlyphs()) |
| return true; |
| |
| const Vector<const SimpleFontData*>* usedFonts = 0; |
| if (curr->isInlineTextBox()) { |
| GlyphOverflowAndFallbackFontsMap::const_iterator it = textBoxDataMap.find(toInlineTextBox(curr)); |
| usedFonts = it == textBoxDataMap.end() ? 0 : &it->value.first; |
| } |
| |
| if (usedFonts) { |
| for (size_t i = 0; i < usedFonts->size(); ++i) { |
| if (usedFonts->at(i)->hasVerticalGlyphs()) |
| return true; |
| } |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool verticalAlignApplies(const RenderObject& renderer) |
| { |
| // http://www.w3.org/TR/CSS2/visudet.html#propdef-vertical-align - vertical-align |
| // only applies to inline level and table-cell elements |
| return !renderer.isText() || renderer.parent()->isInline() || renderer.parent()->isTableCell(); |
| } |
| |
| void InlineFlowBox::adjustMaxAscentAndDescent(int& maxAscent, int& maxDescent, int maxPositionTop, int maxPositionBottom) |
| { |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| // The computed lineheight needs to be extended for the |
| // positioned elements |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if ((curr->verticalAlign() == TOP || curr->verticalAlign() == BOTTOM) && verticalAlignApplies(curr->renderer())) { |
| int lineHeight = curr->lineHeight(); |
| if (curr->verticalAlign() == TOP) { |
| if (maxAscent + maxDescent < lineHeight) |
| maxDescent = lineHeight - maxAscent; |
| } |
| else { |
| if (maxAscent + maxDescent < lineHeight) |
| maxAscent = lineHeight - maxDescent; |
| } |
| |
| if (maxAscent + maxDescent >= std::max(maxPositionTop, maxPositionBottom)) |
| break; |
| } |
| |
| if (curr->isInlineFlowBox()) |
| toInlineFlowBox(curr)->adjustMaxAscentAndDescent(maxAscent, maxDescent, maxPositionTop, maxPositionBottom); |
| } |
| } |
| |
| void InlineFlowBox::computeLogicalBoxHeights(RootInlineBox& rootBox, LayoutUnit& maxPositionTop, LayoutUnit& maxPositionBottom, |
| int& maxAscent, int& maxDescent, bool& setMaxAscent, bool& setMaxDescent, |
| bool strictMode, GlyphOverflowAndFallbackFontsMap& textBoxDataMap, |
| FontBaseline baselineType, VerticalPositionCache& verticalPositionCache) |
| { |
| // The primary purpose of this function is to compute the maximal ascent and descent values for |
| // a line. These values are computed based off the block's line-box-contain property, which indicates |
| // what parts of descendant boxes have to fit within the line. |
| // |
| // The maxAscent value represents the distance of the highest point of any box (typically including line-height) from |
| // the root box's baseline. The maxDescent value represents the distance of the lowest point of any box |
| // (also typically including line-height) from the root box baseline. These values can be negative. |
| // |
| // A secondary purpose of this function is to store the offset of every box's baseline from the root box's |
| // baseline. This information is cached in the logicalTop() of every box. We're effectively just using |
| // the logicalTop() as scratch space. |
| // |
| // Because a box can be positioned such that it ends up fully above or fully below the |
| // root line box, we only consider it to affect the maxAscent and maxDescent values if some |
| // part of the box (EXCLUDING leading) is above (for ascent) or below (for descent) the root box's baseline. |
| bool affectsAscent = false; |
| bool affectsDescent = false; |
| bool checkChildren = !descendantsHaveSameLineHeightAndBaseline(); |
| |
| if (isRootInlineBox()) { |
| // Examine our root box. |
| int ascent = 0; |
| int descent = 0; |
| rootBox.ascentAndDescentForBox(rootBox, textBoxDataMap, ascent, descent, affectsAscent, affectsDescent); |
| if (strictMode || hasTextChildren() || (!checkChildren && hasTextDescendants())) { |
| if (maxAscent < ascent || !setMaxAscent) { |
| maxAscent = ascent; |
| setMaxAscent = true; |
| } |
| if (maxDescent < descent || !setMaxDescent) { |
| maxDescent = descent; |
| setMaxDescent = true; |
| } |
| } |
| } |
| |
| if (!checkChildren) |
| return; |
| |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| InlineFlowBox* inlineFlowBox = curr->isInlineFlowBox() ? toInlineFlowBox(curr) : 0; |
| |
| bool affectsAscent = false; |
| bool affectsDescent = false; |
| |
| // The verticalPositionForBox function returns the distance between the child box's baseline |
| // and the root box's baseline. The value is negative if the child box's baseline is above the |
| // root box's baseline, and it is positive if the child box's baseline is below the root box's baseline. |
| curr->setLogicalTop(rootBox.verticalPositionForBox(curr, verticalPositionCache)); |
| |
| int ascent = 0; |
| int descent = 0; |
| rootBox.ascentAndDescentForBox(*curr, textBoxDataMap, ascent, descent, affectsAscent, affectsDescent); |
| |
| LayoutUnit boxHeight = ascent + descent; |
| if (curr->verticalAlign() == TOP && verticalAlignApplies(curr->renderer())) { |
| if (maxPositionTop < boxHeight) |
| maxPositionTop = boxHeight; |
| } else if (curr->verticalAlign() == BOTTOM && verticalAlignApplies(curr->renderer())) { |
| if (maxPositionBottom < boxHeight) |
| maxPositionBottom = boxHeight; |
| } else if (!inlineFlowBox || strictMode || inlineFlowBox->hasTextChildren() || (inlineFlowBox->descendantsHaveSameLineHeightAndBaseline() && inlineFlowBox->hasTextDescendants()) |
| || inlineFlowBox->renderer().hasInlineDirectionBordersOrPadding()) { |
| // Note that these values can be negative. Even though we only affect the maxAscent and maxDescent values |
| // if our box (excluding line-height) was above (for ascent) or below (for descent) the root baseline, once you factor in line-height |
| // the final box can end up being fully above or fully below the root box's baseline! This is ok, but what it |
| // means is that ascent and descent (including leading), can end up being negative. The setMaxAscent and |
| // setMaxDescent booleans are used to ensure that we're willing to initially set maxAscent/Descent to negative |
| // values. |
| ascent -= curr->logicalTop(); |
| descent += curr->logicalTop(); |
| if (affectsAscent && (maxAscent < ascent || !setMaxAscent)) { |
| maxAscent = ascent; |
| setMaxAscent = true; |
| } |
| |
| if (affectsDescent && (maxDescent < descent || !setMaxDescent)) { |
| maxDescent = descent; |
| setMaxDescent = true; |
| } |
| } |
| |
| if (inlineFlowBox) |
| inlineFlowBox->computeLogicalBoxHeights(rootBox, maxPositionTop, maxPositionBottom, maxAscent, maxDescent, |
| setMaxAscent, setMaxDescent, strictMode, textBoxDataMap, |
| baselineType, verticalPositionCache); |
| } |
| } |
| |
| void InlineFlowBox::placeBoxesInBlockDirection(LayoutUnit top, LayoutUnit maxHeight, int maxAscent, bool strictMode, LayoutUnit& lineTop, LayoutUnit& lineBottom, bool& setLineTop, |
| LayoutUnit& lineTopIncludingMargins, LayoutUnit& lineBottomIncludingMargins, bool& hasAnnotationsBefore, bool& hasAnnotationsAfter, FontBaseline baselineType) |
| { |
| bool isRootBox = isRootInlineBox(); |
| if (isRootBox) { |
| const FontMetrics& fontMetrics = lineStyle().fontMetrics(); |
| // RootInlineBoxes are always placed on at pixel boundaries in their logical y direction. Not doing |
| // so results in incorrect rendering of text decorations, most notably underlines. |
| setLogicalTop(roundToInt(top + maxAscent - fontMetrics.ascent(baselineType))); |
| } |
| |
| LayoutUnit adjustmentForChildrenWithSameLineHeightAndBaseline = 0; |
| if (descendantsHaveSameLineHeightAndBaseline()) { |
| adjustmentForChildrenWithSameLineHeightAndBaseline = logicalTop(); |
| if (parent()) |
| adjustmentForChildrenWithSameLineHeightAndBaseline += renderer().borderAndPaddingBefore(); |
| } |
| |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (descendantsHaveSameLineHeightAndBaseline()) { |
| curr->adjustBlockDirectionPosition(adjustmentForChildrenWithSameLineHeightAndBaseline); |
| continue; |
| } |
| |
| InlineFlowBox* inlineFlowBox = curr->isInlineFlowBox() ? toInlineFlowBox(curr) : 0; |
| bool childAffectsTopBottomPos = true; |
| |
| if (curr->verticalAlign() == TOP && verticalAlignApplies(curr->renderer())) |
| curr->setLogicalTop(top); |
| else if (curr->verticalAlign() == BOTTOM && verticalAlignApplies(curr->renderer())) |
| curr->setLogicalTop(top + maxHeight - curr->lineHeight()); |
| else { |
| if (!strictMode && inlineFlowBox && !inlineFlowBox->hasTextChildren() && !inlineFlowBox->renderer().hasInlineDirectionBordersOrPadding() |
| && !(inlineFlowBox->descendantsHaveSameLineHeightAndBaseline() && inlineFlowBox->hasTextDescendants())) |
| childAffectsTopBottomPos = false; |
| LayoutUnit posAdjust = maxAscent - curr->baselinePosition(baselineType); |
| curr->setLogicalTop(curr->logicalTop() + top + posAdjust); |
| } |
| |
| LayoutUnit newLogicalTop = curr->logicalTop(); |
| LayoutUnit newLogicalTopIncludingMargins = newLogicalTop; |
| LayoutUnit boxHeight = curr->logicalHeight(); |
| LayoutUnit boxHeightIncludingMargins = boxHeight; |
| |
| const RenderStyle& childLineStyle = curr->lineStyle(); |
| if (curr->behavesLikeText() || curr->isInlineFlowBox()) { |
| const FontMetrics& fontMetrics = childLineStyle.fontMetrics(); |
| newLogicalTop += curr->baselinePosition(baselineType) - fontMetrics.ascent(baselineType); |
| if (curr->isInlineFlowBox()) { |
| RenderBoxModelObject& boxObject = toRenderBoxModelObject(curr->renderer()); |
| newLogicalTop -= childLineStyle.isHorizontalWritingMode() |
| ? boxObject.borderTop() + boxObject.paddingTop() |
| : boxObject.borderRight() + boxObject.paddingRight(); |
| } |
| newLogicalTopIncludingMargins = newLogicalTop; |
| } else if (!curr->renderer().isBR()) { |
| const RenderBox& box = toRenderBox(curr->renderer()); |
| newLogicalTopIncludingMargins = newLogicalTop; |
| LayoutUnit overSideMargin = curr->isHorizontal() ? box.marginTop() : box.marginRight(); |
| LayoutUnit underSideMargin = curr->isHorizontal() ? box.marginBottom() : box.marginLeft(); |
| newLogicalTop += overSideMargin; |
| boxHeightIncludingMargins += overSideMargin + underSideMargin; |
| } |
| |
| curr->setLogicalTop(newLogicalTop); |
| |
| if (childAffectsTopBottomPos) { |
| if (curr->renderer().isRubyRun()) { |
| // Treat the leading on the first and last lines of ruby runs as not being part of the overall lineTop/lineBottom. |
| // Really this is a workaround hack for the fact that ruby should have been done as line layout and not done using |
| // inline-block. |
| if (renderer().style().isFlippedLinesWritingMode() == (curr->renderer().style().rubyPosition() == RubyPositionAfter)) |
| hasAnnotationsBefore = true; |
| else |
| hasAnnotationsAfter = true; |
| |
| RenderRubyRun& rubyRun = toRenderRubyRun(curr->renderer()); |
| if (RenderRubyBase* rubyBase = rubyRun.rubyBase()) { |
| LayoutUnit bottomRubyBaseLeading = (curr->logicalHeight() - rubyBase->logicalBottom()) + rubyBase->logicalHeight() - (rubyBase->lastRootBox() ? rubyBase->lastRootBox()->lineBottom() : LayoutUnit()); |
| LayoutUnit topRubyBaseLeading = rubyBase->logicalTop() + (rubyBase->firstRootBox() ? rubyBase->firstRootBox()->lineTop() : LayoutUnit()); |
| newLogicalTop += !renderer().style().isFlippedLinesWritingMode() ? topRubyBaseLeading : bottomRubyBaseLeading; |
| boxHeight -= (topRubyBaseLeading + bottomRubyBaseLeading); |
| } |
| } |
| if (curr->isInlineTextBox()) { |
| bool emphasisMarkIsOver; |
| if (toInlineTextBox(curr)->emphasisMarkExistsAndIsAbove(childLineStyle, emphasisMarkIsOver)) { |
| if (emphasisMarkIsOver != childLineStyle.isFlippedLinesWritingMode()) |
| hasAnnotationsBefore = true; |
| else |
| hasAnnotationsAfter = true; |
| } |
| } |
| |
| if (!setLineTop) { |
| setLineTop = true; |
| lineTop = newLogicalTop; |
| lineTopIncludingMargins = std::min(lineTop, newLogicalTopIncludingMargins); |
| } else { |
| lineTop = std::min(lineTop, newLogicalTop); |
| lineTopIncludingMargins = std::min(lineTop, std::min(lineTopIncludingMargins, newLogicalTopIncludingMargins)); |
| } |
| lineBottom = std::max(lineBottom, newLogicalTop + boxHeight); |
| lineBottomIncludingMargins = std::max(lineBottom, std::max(lineBottomIncludingMargins, newLogicalTopIncludingMargins + boxHeightIncludingMargins)); |
| } |
| |
| // Adjust boxes to use their real box y/height and not the logical height (as dictated by |
| // line-height). |
| if (inlineFlowBox) |
| inlineFlowBox->placeBoxesInBlockDirection(top, maxHeight, maxAscent, strictMode, lineTop, lineBottom, setLineTop, |
| lineTopIncludingMargins, lineBottomIncludingMargins, hasAnnotationsBefore, hasAnnotationsAfter, baselineType); |
| } |
| |
| if (isRootBox) { |
| if (strictMode || hasTextChildren() || (descendantsHaveSameLineHeightAndBaseline() && hasTextDescendants())) { |
| if (!setLineTop) { |
| setLineTop = true; |
| lineTop = pixelSnappedLogicalTop(); |
| lineTopIncludingMargins = lineTop; |
| } else { |
| lineTop = std::min<LayoutUnit>(lineTop, pixelSnappedLogicalTop()); |
| lineTopIncludingMargins = std::min(lineTop, lineTopIncludingMargins); |
| } |
| lineBottom = std::max<LayoutUnit>(lineBottom, pixelSnappedLogicalBottom()); |
| lineBottomIncludingMargins = std::max(lineBottom, lineBottomIncludingMargins); |
| } |
| |
| if (renderer().style().isFlippedLinesWritingMode()) |
| flipLinesInBlockDirection(lineTopIncludingMargins, lineBottomIncludingMargins); |
| } |
| } |
| |
| void InlineFlowBox::maxLogicalBottomForTextDecorationLine(float& maxLogicalBottom, const RenderElement* decorationRenderer, TextDecoration textDecoration) const |
| { |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) { |
| if (child->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (!(child->lineStyle().textDecorationsInEffect() & textDecoration)) |
| continue; // If the text decoration isn't in effect on the child, then it must be outside of |decorationRenderer|'s hierarchy. |
| |
| if (decorationRenderer && decorationRenderer->isRenderInline() && !isAncestorAndWithinBlock(toRenderInline(*decorationRenderer), &child->renderer())) |
| continue; |
| |
| if (child->isInlineFlowBox()) |
| toInlineFlowBox(child)->maxLogicalBottomForTextDecorationLine(maxLogicalBottom, decorationRenderer, textDecoration); |
| else { |
| if (child->isInlineTextBox() || child->lineStyle().textDecorationSkip() == TextDecorationSkipNone) |
| maxLogicalBottom = std::max<float>(maxLogicalBottom, child->logicalBottom()); |
| } |
| } |
| } |
| |
| void InlineFlowBox::minLogicalTopForTextDecorationLine(float& minLogicalTop, const RenderElement* decorationRenderer, TextDecoration textDecoration) const |
| { |
| for (InlineBox* child = firstChild(); child; child = child->nextOnLine()) { |
| if (child->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (!(child->lineStyle().textDecorationsInEffect() & textDecoration)) |
| continue; // If the text decoration isn't in effect on the child, then it must be outside of |decorationRenderer|'s hierarchy. |
| |
| if (decorationRenderer && decorationRenderer->isRenderInline() && !isAncestorAndWithinBlock(toRenderInline(*decorationRenderer), &child->renderer())) |
| continue; |
| |
| if (child->isInlineFlowBox()) |
| toInlineFlowBox(child)->minLogicalTopForTextDecorationLine(minLogicalTop, decorationRenderer, textDecoration); |
| else { |
| if (child->isInlineTextBox() || child->lineStyle().textDecorationSkip() == TextDecorationSkipNone) |
| minLogicalTop = std::min<float>(minLogicalTop, child->logicalTop()); |
| } |
| } |
| } |
| |
| void InlineFlowBox::flipLinesInBlockDirection(LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| // Flip the box on the line such that the top is now relative to the lineBottom instead of the lineTop. |
| setLogicalTop(lineBottom - (logicalTop() - lineTop) - logicalHeight()); |
| |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders aren't affected here. |
| |
| if (curr->isInlineFlowBox()) |
| toInlineFlowBox(curr)->flipLinesInBlockDirection(lineTop, lineBottom); |
| else |
| curr->setLogicalTop(lineBottom - (curr->logicalTop() - lineTop) - curr->logicalHeight()); |
| } |
| } |
| |
| inline void InlineFlowBox::addBoxShadowVisualOverflow(LayoutRect& logicalVisualOverflow) |
| { |
| // box-shadow on root line boxes is applying to the block and not to the lines. |
| if (!parent()) |
| return; |
| |
| const RenderStyle& lineStyle = this->lineStyle(); |
| if (!lineStyle.boxShadow()) |
| return; |
| |
| LayoutUnit boxShadowLogicalTop; |
| LayoutUnit boxShadowLogicalBottom; |
| lineStyle.getBoxShadowBlockDirectionExtent(boxShadowLogicalTop, boxShadowLogicalBottom); |
| |
| // Similar to how glyph overflow works, if our lines are flipped, then it's actually the opposite shadow that applies, since |
| // the line is "upside down" in terms of block coordinates. |
| LayoutUnit shadowLogicalTop = lineStyle.isFlippedLinesWritingMode() ? -boxShadowLogicalBottom : boxShadowLogicalTop; |
| LayoutUnit shadowLogicalBottom = lineStyle.isFlippedLinesWritingMode() ? -boxShadowLogicalTop : boxShadowLogicalBottom; |
| |
| LayoutUnit logicalTopVisualOverflow = std::min(pixelSnappedLogicalTop() + shadowLogicalTop, logicalVisualOverflow.y()); |
| LayoutUnit logicalBottomVisualOverflow = std::max(pixelSnappedLogicalBottom() + shadowLogicalBottom, logicalVisualOverflow.maxY()); |
| |
| LayoutUnit boxShadowLogicalLeft; |
| LayoutUnit boxShadowLogicalRight; |
| lineStyle.getBoxShadowInlineDirectionExtent(boxShadowLogicalLeft, boxShadowLogicalRight); |
| |
| LayoutUnit logicalLeftVisualOverflow = std::min(pixelSnappedLogicalLeft() + boxShadowLogicalLeft, logicalVisualOverflow.x()); |
| LayoutUnit logicalRightVisualOverflow = std::max(pixelSnappedLogicalRight() + boxShadowLogicalRight, logicalVisualOverflow.maxX()); |
| |
| logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow, |
| logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow); |
| } |
| |
| inline void InlineFlowBox::addBorderOutsetVisualOverflow(LayoutRect& logicalVisualOverflow) |
| { |
| // border-image-outset on root line boxes is applying to the block and not to the lines. |
| if (!parent()) |
| return; |
| |
| const RenderStyle& lineStyle = this->lineStyle(); |
| if (!lineStyle.hasBorderImageOutsets()) |
| return; |
| |
| LayoutBoxExtent borderOutsets = lineStyle.borderImageOutsets(); |
| |
| LayoutUnit borderOutsetLogicalTop = borderOutsets.logicalTop(lineStyle.writingMode()); |
| LayoutUnit borderOutsetLogicalBottom = borderOutsets.logicalBottom(lineStyle.writingMode()); |
| LayoutUnit borderOutsetLogicalLeft = borderOutsets.logicalLeft(lineStyle.writingMode()); |
| LayoutUnit borderOutsetLogicalRight = borderOutsets.logicalRight(lineStyle.writingMode()); |
| |
| // Similar to how glyph overflow works, if our lines are flipped, then it's actually the opposite border that applies, since |
| // the line is "upside down" in terms of block coordinates. vertical-rl and horizontal-bt are the flipped line modes. |
| LayoutUnit outsetLogicalTop = lineStyle.isFlippedLinesWritingMode() ? borderOutsetLogicalBottom : borderOutsetLogicalTop; |
| LayoutUnit outsetLogicalBottom = lineStyle.isFlippedLinesWritingMode() ? borderOutsetLogicalTop : borderOutsetLogicalBottom; |
| |
| LayoutUnit logicalTopVisualOverflow = std::min(pixelSnappedLogicalTop() - outsetLogicalTop, logicalVisualOverflow.y()); |
| LayoutUnit logicalBottomVisualOverflow = std::max(pixelSnappedLogicalBottom() + outsetLogicalBottom, logicalVisualOverflow.maxY()); |
| |
| LayoutUnit outsetLogicalLeft = includeLogicalLeftEdge() ? borderOutsetLogicalLeft : LayoutUnit(); |
| LayoutUnit outsetLogicalRight = includeLogicalRightEdge() ? borderOutsetLogicalRight : LayoutUnit(); |
| |
| LayoutUnit logicalLeftVisualOverflow = std::min(pixelSnappedLogicalLeft() - outsetLogicalLeft, logicalVisualOverflow.x()); |
| LayoutUnit logicalRightVisualOverflow = std::max(pixelSnappedLogicalRight() + outsetLogicalRight, logicalVisualOverflow.maxX()); |
| |
| logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow, |
| logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow); |
| } |
| |
| inline void InlineFlowBox::addTextBoxVisualOverflow(InlineTextBox& textBox, GlyphOverflowAndFallbackFontsMap& textBoxDataMap, LayoutRect& logicalVisualOverflow) |
| { |
| if (textBox.knownToHaveNoOverflow()) |
| return; |
| |
| const RenderStyle& lineStyle = this->lineStyle(); |
| |
| GlyphOverflowAndFallbackFontsMap::iterator it = textBoxDataMap.find(&textBox); |
| GlyphOverflow* glyphOverflow = it == textBoxDataMap.end() ? 0 : &it->value.second; |
| bool isFlippedLine = lineStyle.isFlippedLinesWritingMode(); |
| |
| int topGlyphEdge = glyphOverflow ? (isFlippedLine ? glyphOverflow->bottom : glyphOverflow->top) : 0; |
| int bottomGlyphEdge = glyphOverflow ? (isFlippedLine ? glyphOverflow->top : glyphOverflow->bottom) : 0; |
| int leftGlyphEdge = glyphOverflow ? glyphOverflow->left : 0; |
| int rightGlyphEdge = glyphOverflow ? glyphOverflow->right : 0; |
| |
| int strokeOverflow = static_cast<int>(ceilf(lineStyle.textStrokeWidth() / 2.0f)); |
| int topGlyphOverflow = -strokeOverflow - topGlyphEdge; |
| int bottomGlyphOverflow = strokeOverflow + bottomGlyphEdge; |
| int leftGlyphOverflow = -strokeOverflow - leftGlyphEdge; |
| int rightGlyphOverflow = strokeOverflow + rightGlyphEdge; |
| |
| bool emphasisMarkIsAbove; |
| if (lineStyle.textEmphasisMark() != TextEmphasisMarkNone && textBox.emphasisMarkExistsAndIsAbove(lineStyle, emphasisMarkIsAbove)) { |
| int emphasisMarkHeight = lineStyle.font().emphasisMarkHeight(lineStyle.textEmphasisMarkString()); |
| if (emphasisMarkIsAbove == !lineStyle.isFlippedLinesWritingMode()) |
| topGlyphOverflow = std::min(topGlyphOverflow, -emphasisMarkHeight); |
| else |
| bottomGlyphOverflow = std::max(bottomGlyphOverflow, emphasisMarkHeight); |
| } |
| |
| // If letter-spacing is negative, we should factor that into right layout overflow. (Even in RTL, letter-spacing is |
| // applied to the right, so this is not an issue with left overflow. |
| rightGlyphOverflow -= std::min(0, (int)lineStyle.font().letterSpacing()); |
| |
| LayoutUnit textShadowLogicalTop; |
| LayoutUnit textShadowLogicalBottom; |
| lineStyle.getTextShadowBlockDirectionExtent(textShadowLogicalTop, textShadowLogicalBottom); |
| |
| LayoutUnit childOverflowLogicalTop = std::min<LayoutUnit>(textShadowLogicalTop + topGlyphOverflow, topGlyphOverflow); |
| LayoutUnit childOverflowLogicalBottom = std::max<LayoutUnit>(textShadowLogicalBottom + bottomGlyphOverflow, bottomGlyphOverflow); |
| |
| LayoutUnit textShadowLogicalLeft; |
| LayoutUnit textShadowLogicalRight; |
| lineStyle.getTextShadowInlineDirectionExtent(textShadowLogicalLeft, textShadowLogicalRight); |
| |
| LayoutUnit childOverflowLogicalLeft = std::min<LayoutUnit>(textShadowLogicalLeft + leftGlyphOverflow, leftGlyphOverflow); |
| LayoutUnit childOverflowLogicalRight = std::max<LayoutUnit>(textShadowLogicalRight + rightGlyphOverflow, rightGlyphOverflow); |
| |
| LayoutUnit logicalTopVisualOverflow = std::min(textBox.pixelSnappedLogicalTop() + childOverflowLogicalTop, logicalVisualOverflow.y()); |
| LayoutUnit logicalBottomVisualOverflow = std::max(textBox.pixelSnappedLogicalBottom() + childOverflowLogicalBottom, logicalVisualOverflow.maxY()); |
| LayoutUnit logicalLeftVisualOverflow = std::min(textBox.pixelSnappedLogicalLeft() + childOverflowLogicalLeft, logicalVisualOverflow.x()); |
| LayoutUnit logicalRightVisualOverflow = std::max(textBox.pixelSnappedLogicalRight() + childOverflowLogicalRight, logicalVisualOverflow.maxX()); |
| |
| logicalVisualOverflow = LayoutRect(logicalLeftVisualOverflow, logicalTopVisualOverflow, |
| logicalRightVisualOverflow - logicalLeftVisualOverflow, logicalBottomVisualOverflow - logicalTopVisualOverflow); |
| |
| textBox.setLogicalOverflowRect(logicalVisualOverflow); |
| } |
| |
| inline void InlineFlowBox::addReplacedChildOverflow(const InlineBox* inlineBox, LayoutRect& logicalLayoutOverflow, LayoutRect& logicalVisualOverflow) |
| { |
| const RenderBox& box = toRenderBox(inlineBox->renderer()); |
| |
| // Visual overflow only propagates if the box doesn't have a self-painting layer. This rectangle does not include |
| // transforms or relative positioning (since those objects always have self-painting layers), but it does need to be adjusted |
| // for writing-mode differences. |
| if (!box.hasSelfPaintingLayer()) { |
| LayoutRect childLogicalVisualOverflow = box.logicalVisualOverflowRectForPropagation(&renderer().style()); |
| childLogicalVisualOverflow.move(inlineBox->logicalLeft(), inlineBox->logicalTop()); |
| logicalVisualOverflow.unite(childLogicalVisualOverflow); |
| } |
| |
| // Layout overflow internal to the child box only propagates if the child box doesn't have overflow clip set. |
| // Otherwise the child border box propagates as layout overflow. This rectangle must include transforms and relative positioning |
| // and be adjusted for writing-mode differences. |
| LayoutRect childLogicalLayoutOverflow = box.logicalLayoutOverflowRectForPropagation(&renderer().style()); |
| childLogicalLayoutOverflow.move(inlineBox->logicalLeft(), inlineBox->logicalTop()); |
| logicalLayoutOverflow.unite(childLogicalLayoutOverflow); |
| } |
| |
| void InlineFlowBox::computeOverflow(LayoutUnit lineTop, LayoutUnit lineBottom, GlyphOverflowAndFallbackFontsMap& textBoxDataMap) |
| { |
| // If we know we have no overflow, we can just bail. |
| if (knownToHaveNoOverflow()) |
| return; |
| |
| if (m_overflow) |
| m_overflow.clear(); |
| |
| // Visual overflow just includes overflow for stuff we need to repaint ourselves. Self-painting layers are ignored. |
| // Layout overflow is used to determine scrolling extent, so it still includes child layers and also factors in |
| // transforms, relative positioning, etc. |
| LayoutRect logicalLayoutOverflow(enclosingLayoutRect(logicalFrameRectIncludingLineHeight(lineTop, lineBottom))); |
| LayoutRect logicalVisualOverflow(logicalLayoutOverflow); |
| |
| addBoxShadowVisualOverflow(logicalVisualOverflow); |
| addBorderOutsetVisualOverflow(logicalVisualOverflow); |
| |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (curr->renderer().isLineBreak()) |
| continue; |
| if (curr->renderer().isText()) { |
| InlineTextBox* text = toInlineTextBox(curr); |
| LayoutRect textBoxOverflow(enclosingLayoutRect(text->logicalFrameRect())); |
| addTextBoxVisualOverflow(*text, textBoxDataMap, textBoxOverflow); |
| logicalVisualOverflow.unite(textBoxOverflow); |
| } else if (curr->renderer().isRenderInline()) { |
| InlineFlowBox* flow = toInlineFlowBox(curr); |
| flow->computeOverflow(lineTop, lineBottom, textBoxDataMap); |
| if (!flow->renderer().hasSelfPaintingLayer()) |
| logicalVisualOverflow.unite(flow->logicalVisualOverflowRect(lineTop, lineBottom)); |
| LayoutRect childLayoutOverflow = flow->logicalLayoutOverflowRect(lineTop, lineBottom); |
| childLayoutOverflow.move(flow->renderer().relativePositionLogicalOffset()); |
| logicalLayoutOverflow.unite(childLayoutOverflow); |
| } else |
| addReplacedChildOverflow(curr, logicalLayoutOverflow, logicalVisualOverflow); |
| } |
| |
| setOverflowFromLogicalRects(logicalLayoutOverflow, logicalVisualOverflow, lineTop, lineBottom); |
| } |
| |
| void InlineFlowBox::setLayoutOverflow(const LayoutRect& rect, LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| LayoutRect frameBox = enclosingLayoutRect(frameRectIncludingLineHeight(lineTop, lineBottom)); |
| if (frameBox.contains(rect) || rect.isEmpty()) |
| return; |
| |
| if (!m_overflow) |
| m_overflow = adoptRef(new RenderOverflow(frameBox, frameBox)); |
| |
| m_overflow->setLayoutOverflow(rect); |
| } |
| |
| void InlineFlowBox::setVisualOverflow(const LayoutRect& rect, LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| LayoutRect frameBox = enclosingLayoutRect(frameRectIncludingLineHeight(lineTop, lineBottom)); |
| if (frameBox.contains(rect) || rect.isEmpty()) |
| return; |
| |
| if (!m_overflow) |
| m_overflow = adoptRef(new RenderOverflow(frameBox, frameBox)); |
| |
| m_overflow->setVisualOverflow(rect); |
| } |
| |
| void InlineFlowBox::setOverflowFromLogicalRects(const LayoutRect& logicalLayoutOverflow, const LayoutRect& logicalVisualOverflow, LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| LayoutRect layoutOverflow(isHorizontal() ? logicalLayoutOverflow : logicalLayoutOverflow.transposedRect()); |
| setLayoutOverflow(layoutOverflow, lineTop, lineBottom); |
| |
| LayoutRect visualOverflow(isHorizontal() ? logicalVisualOverflow : logicalVisualOverflow.transposedRect()); |
| setVisualOverflow(visualOverflow, lineTop, lineBottom); |
| } |
| |
| bool InlineFlowBox::nodeAtPoint(const HitTestRequest& request, HitTestResult& result, const HitTestLocation& locationInContainer, const LayoutPoint& accumulatedOffset, LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| LayoutRect overflowRect(visualOverflowRect(lineTop, lineBottom)); |
| flipForWritingMode(overflowRect); |
| overflowRect.moveBy(accumulatedOffset); |
| if (!locationInContainer.intersects(overflowRect)) |
| return false; |
| |
| // Check children first. |
| // We need to account for culled inline parents of the hit-tested nodes, so that they may also get included in area-based hit-tests. |
| RenderElement* culledParent = 0; |
| for (InlineBox* curr = lastChild(); curr; curr = curr->prevOnLine()) { |
| if (curr->renderer().isText() || !curr->boxModelObject()->hasSelfPaintingLayer()) { |
| RenderElement* newParent = 0; |
| // Culled parents are only relevant for area-based hit-tests, so ignore it in point-based ones. |
| if (locationInContainer.isRectBasedTest()) { |
| newParent = curr->renderer().parent(); |
| if (newParent == &renderer()) |
| newParent = 0; |
| } |
| // Check the culled parent after all its children have been checked, to do this we wait until |
| // we are about to test an element with a different parent. |
| if (newParent != culledParent) { |
| if (!newParent || !newParent->isDescendantOf(culledParent)) { |
| while (culledParent && culledParent != &renderer() && culledParent != newParent) { |
| if (culledParent->isRenderInline() && toRenderInline(culledParent)->hitTestCulledInline(request, result, locationInContainer, accumulatedOffset)) |
| return true; |
| culledParent = culledParent->parent(); |
| } |
| } |
| culledParent = newParent; |
| } |
| if (curr->nodeAtPoint(request, result, locationInContainer, accumulatedOffset, lineTop, lineBottom)) { |
| renderer().updateHitTestResult(result, locationInContainer.point() - toLayoutSize(accumulatedOffset)); |
| return true; |
| } |
| } |
| } |
| // Check any culled ancestor of the final children tested. |
| while (culledParent && culledParent != &renderer()) { |
| if (culledParent->isRenderInline() && toRenderInline(culledParent)->hitTestCulledInline(request, result, locationInContainer, accumulatedOffset)) |
| return true; |
| culledParent = culledParent->parent(); |
| } |
| |
| // Now check ourselves. Pixel snap hit testing. |
| if (!visibleToHitTesting()) |
| return false; |
| |
| // Do not hittest content beyond the ellipsis box. |
| if (isRootInlineBox() && hasEllipsisBox()) { |
| const EllipsisBox* ellipsisBox = root().ellipsisBox(); |
| FloatRect boundsRect(frameRect()); |
| |
| if (isHorizontal()) |
| renderer().style().isLeftToRightDirection() ? boundsRect.shiftXEdgeTo(ellipsisBox->right()) : boundsRect.setWidth(ellipsisBox->left() - left()); |
| else |
| boundsRect.shiftYEdgeTo(ellipsisBox->right()); |
| |
| flipForWritingMode(boundsRect); |
| boundsRect.moveBy(accumulatedOffset); |
| // We are beyond the ellipsis box. |
| if (locationInContainer.intersects(boundsRect)) |
| return false; |
| } |
| |
| // Constrain our hit testing to the line top and bottom if necessary. |
| bool noQuirksMode = renderer().document().inNoQuirksMode(); |
| if (!noQuirksMode && !hasTextChildren() && !(descendantsHaveSameLineHeightAndBaseline() && hasTextDescendants())) { |
| RootInlineBox& rootBox = root(); |
| LayoutUnit top = isHorizontal() ? y() : x(); |
| LayoutUnit logicalHeight = isHorizontal() ? height() : width(); |
| LayoutUnit bottom = std::min(rootBox.lineBottom(), top + logicalHeight); |
| top = std::max(rootBox.lineTop(), top); |
| logicalHeight = bottom - top; |
| } |
| |
| // Move x/y to our coordinates. |
| FloatRect rect(frameRect()); |
| flipForWritingMode(rect); |
| rect.moveBy(accumulatedOffset); |
| |
| if (locationInContainer.intersects(rect)) { |
| renderer().updateHitTestResult(result, flipForWritingMode(locationInContainer.point() - toLayoutSize(accumulatedOffset))); // Don't add in m_x or m_y here, we want coords in the containing block's space. |
| if (!result.addNodeToRectBasedTestResult(renderer().element(), request, locationInContainer, rect)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void InlineFlowBox::paint(PaintInfo& paintInfo, const LayoutPoint& paintOffset, LayoutUnit lineTop, LayoutUnit lineBottom) |
| { |
| LayoutRect overflowRect(visualOverflowRect(lineTop, lineBottom)); |
| overflowRect.inflate(renderer().maximalOutlineSize(paintInfo.phase)); |
| flipForWritingMode(overflowRect); |
| overflowRect.moveBy(paintOffset); |
| |
| if (!paintInfo.rect.intersects(pixelSnappedIntRect(overflowRect))) |
| return; |
| |
| if (paintInfo.phase != PaintPhaseChildOutlines) { |
| if (paintInfo.phase == PaintPhaseOutline || paintInfo.phase == PaintPhaseSelfOutline) { |
| // Add ourselves to the paint info struct's list of inlines that need to paint their |
| // outlines. |
| if (renderer().style().visibility() == VISIBLE && renderer().hasOutline() && !isRootInlineBox()) { |
| RenderInline& inlineFlow = toRenderInline(renderer()); |
| |
| RenderBlock* cb = 0; |
| bool containingBlockPaintsContinuationOutline = inlineFlow.continuation() || inlineFlow.isInlineElementContinuation(); |
| if (containingBlockPaintsContinuationOutline) { |
| // FIXME: See https://bugs.webkit.org/show_bug.cgi?id=54690. We currently don't reconnect inline continuations |
| // after a child removal. As a result, those merged inlines do not get seperated and hence not get enclosed by |
| // anonymous blocks. In this case, it is better to bail out and paint it ourself. |
| RenderBlock* enclosingAnonymousBlock = renderer().containingBlock(); |
| if (!enclosingAnonymousBlock->isAnonymousBlock()) |
| containingBlockPaintsContinuationOutline = false; |
| else { |
| cb = enclosingAnonymousBlock->containingBlock(); |
| for (auto box = &renderer(); box != cb; box = &box->parent()->enclosingBoxModelObject()) { |
| if (box->hasSelfPaintingLayer()) { |
| containingBlockPaintsContinuationOutline = false; |
| break; |
| } |
| } |
| } |
| } |
| |
| if (containingBlockPaintsContinuationOutline) { |
| // Add ourselves to the containing block of the entire continuation so that it can |
| // paint us atomically. |
| cb->addContinuationWithOutline(toRenderInline(renderer().element()->renderer())); |
| } else if (!inlineFlow.isInlineElementContinuation()) |
| paintInfo.outlineObjects->add(&inlineFlow); |
| } |
| } else if (paintInfo.phase == PaintPhaseMask) { |
| paintMask(paintInfo, paintOffset); |
| return; |
| } else { |
| // Paint our background, border and box-shadow. |
| paintBoxDecorations(paintInfo, paintOffset); |
| } |
| } |
| |
| if (paintInfo.phase == PaintPhaseMask) |
| return; |
| |
| PaintPhase paintPhase = paintInfo.phase == PaintPhaseChildOutlines ? PaintPhaseOutline : paintInfo.phase; |
| PaintInfo childInfo(paintInfo); |
| childInfo.phase = paintPhase; |
| childInfo.updateSubtreePaintRootForChildren(&renderer()); |
| |
| // Paint our children. |
| if (paintPhase != PaintPhaseSelfOutline) { |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isText() || !curr->boxModelObject()->hasSelfPaintingLayer()) |
| curr->paint(childInfo, paintOffset, lineTop, lineBottom); |
| } |
| } |
| } |
| |
| void InlineFlowBox::paintFillLayers(const PaintInfo& paintInfo, const Color& c, const FillLayer* fillLayer, const LayoutRect& rect, CompositeOperator op) |
| { |
| if (!fillLayer) |
| return; |
| paintFillLayers(paintInfo, c, fillLayer->next(), rect, op); |
| paintFillLayer(paintInfo, c, fillLayer, rect, op); |
| } |
| |
| bool InlineFlowBox::boxShadowCanBeAppliedToBackground(const FillLayer& lastBackgroundLayer) const |
| { |
| // The checks here match how paintFillLayer() decides whether to clip (if it does, the shadow |
| // would be clipped out, so it has to be drawn separately). |
| StyleImage* image = lastBackgroundLayer.image(); |
| bool hasFillImage = image && image->canRender(&renderer(), renderer().style().effectiveZoom()); |
| return (!hasFillImage && !renderer().style().hasBorderRadius()) || (!prevLineBox() && !nextLineBox()) || !parent(); |
| } |
| |
| void InlineFlowBox::paintFillLayer(const PaintInfo& paintInfo, const Color& c, const FillLayer* fillLayer, const LayoutRect& rect, CompositeOperator op) |
| { |
| StyleImage* img = fillLayer->image(); |
| bool hasFillImage = img && img->canRender(&renderer(), renderer().style().effectiveZoom()); |
| if ((!hasFillImage && !renderer().style().hasBorderRadius()) || (!prevLineBox() && !nextLineBox()) || !parent()) |
| renderer().paintFillLayerExtended(paintInfo, c, fillLayer, rect, BackgroundBleedNone, this, rect.size(), op); |
| #if ENABLE(CSS_BOX_DECORATION_BREAK) |
| else if (renderer().style().boxDecorationBreak() == DCLONE) { |
| GraphicsContextStateSaver stateSaver(*paintInfo.context); |
| paintInfo.context->clip(LayoutRect(rect.x(), rect.y(), width(), height())); |
| renderer().paintFillLayerExtended(paintInfo, c, fillLayer, rect, BackgroundBleedNone, this, rect.size(), op); |
| } |
| #endif |
| else { |
| // We have a fill image that spans multiple lines. |
| // We need to adjust tx and ty by the width of all previous lines. |
| // Think of background painting on inlines as though you had one long line, a single continuous |
| // strip. Even though that strip has been broken up across multiple lines, you still paint it |
| // as though you had one single line. This means each line has to pick up the background where |
| // the previous line left off. |
| LayoutUnit logicalOffsetOnLine = 0; |
| LayoutUnit totalLogicalWidth; |
| if (renderer().style().direction() == LTR) { |
| for (InlineFlowBox* curr = prevLineBox(); curr; curr = curr->prevLineBox()) |
| logicalOffsetOnLine += curr->logicalWidth(); |
| totalLogicalWidth = logicalOffsetOnLine; |
| for (InlineFlowBox* curr = this; curr; curr = curr->nextLineBox()) |
| totalLogicalWidth += curr->logicalWidth(); |
| } else { |
| for (InlineFlowBox* curr = nextLineBox(); curr; curr = curr->nextLineBox()) |
| logicalOffsetOnLine += curr->logicalWidth(); |
| totalLogicalWidth = logicalOffsetOnLine; |
| for (InlineFlowBox* curr = this; curr; curr = curr->prevLineBox()) |
| totalLogicalWidth += curr->logicalWidth(); |
| } |
| LayoutUnit stripX = rect.x() - (isHorizontal() ? logicalOffsetOnLine : LayoutUnit()); |
| LayoutUnit stripY = rect.y() - (isHorizontal() ? LayoutUnit() : logicalOffsetOnLine); |
| LayoutUnit stripWidth = isHorizontal() ? totalLogicalWidth : LayoutUnit(width()); |
| LayoutUnit stripHeight = isHorizontal() ? LayoutUnit(height()) : totalLogicalWidth; |
| |
| GraphicsContextStateSaver stateSaver(*paintInfo.context); |
| paintInfo.context->clip(LayoutRect(rect.x(), rect.y(), width(), height())); |
| renderer().paintFillLayerExtended(paintInfo, c, fillLayer, LayoutRect(stripX, stripY, stripWidth, stripHeight), BackgroundBleedNone, this, rect.size(), op); |
| } |
| } |
| |
| void InlineFlowBox::paintBoxShadow(const PaintInfo& info, const RenderStyle& style, ShadowStyle shadowStyle, const LayoutRect& paintRect) |
| { |
| if ((!prevLineBox() && !nextLineBox()) || !parent()) |
| renderer().paintBoxShadow(info, paintRect, style, shadowStyle); |
| else { |
| // FIXME: We can do better here in the multi-line case. We want to push a clip so that the shadow doesn't |
| // protrude incorrectly at the edges, and we want to possibly include shadows cast from the previous/following lines |
| renderer().paintBoxShadow(info, paintRect, style, shadowStyle, includeLogicalLeftEdge(), includeLogicalRightEdge()); |
| } |
| } |
| |
| void InlineFlowBox::constrainToLineTopAndBottomIfNeeded(LayoutRect& rect) const |
| { |
| bool noQuirksMode = renderer().document().inNoQuirksMode(); |
| if (!noQuirksMode && !hasTextChildren() && !(descendantsHaveSameLineHeightAndBaseline() && hasTextDescendants())) { |
| const RootInlineBox& rootBox = root(); |
| LayoutUnit logicalTop = isHorizontal() ? rect.y() : rect.x(); |
| LayoutUnit logicalHeight = isHorizontal() ? rect.height() : rect.width(); |
| LayoutUnit bottom = std::min(rootBox.lineBottom(), logicalTop + logicalHeight); |
| logicalTop = std::max(rootBox.lineTop(), logicalTop); |
| logicalHeight = bottom - logicalTop; |
| if (isHorizontal()) { |
| rect.setY(logicalTop); |
| rect.setHeight(logicalHeight); |
| } else { |
| rect.setX(logicalTop); |
| rect.setWidth(logicalHeight); |
| } |
| } |
| } |
| |
| static LayoutRect clipRectForNinePieceImageStrip(InlineFlowBox* box, const NinePieceImage& image, const LayoutRect& paintRect) |
| { |
| LayoutRect clipRect(paintRect); |
| RenderStyle& style = box->renderer().style(); |
| LayoutBoxExtent outsets = style.imageOutsets(image); |
| if (box->isHorizontal()) { |
| clipRect.setY(paintRect.y() - outsets.top()); |
| clipRect.setHeight(paintRect.height() + outsets.top() + outsets.bottom()); |
| if (box->includeLogicalLeftEdge()) { |
| clipRect.setX(paintRect.x() - outsets.left()); |
| clipRect.setWidth(paintRect.width() + outsets.left()); |
| } |
| if (box->includeLogicalRightEdge()) |
| clipRect.setWidth(clipRect.width() + outsets.right()); |
| } else { |
| clipRect.setX(paintRect.x() - outsets.left()); |
| clipRect.setWidth(paintRect.width() + outsets.left() + outsets.right()); |
| if (box->includeLogicalLeftEdge()) { |
| clipRect.setY(paintRect.y() - outsets.top()); |
| clipRect.setHeight(paintRect.height() + outsets.top()); |
| } |
| if (box->includeLogicalRightEdge()) |
| clipRect.setHeight(clipRect.height() + outsets.bottom()); |
| } |
| return clipRect; |
| } |
| |
| void InlineFlowBox::paintBoxDecorations(PaintInfo& paintInfo, const LayoutPoint& paintOffset) |
| { |
| if (!paintInfo.shouldPaintWithinRoot(renderer()) || renderer().style().visibility() != VISIBLE || paintInfo.phase != PaintPhaseForeground) |
| return; |
| |
| LayoutRect frameRect(this->frameRect()); |
| constrainToLineTopAndBottomIfNeeded(frameRect); |
| |
| // Move x/y to our coordinates. |
| LayoutRect localRect(frameRect); |
| flipForWritingMode(localRect); |
| |
| // You can use p::first-line to specify a background. If so, the root line boxes for |
| // a line may actually have to paint a background. |
| if (parent() && !renderer().hasBoxDecorations()) |
| return; |
| const RenderStyle& lineStyle = this->lineStyle(); |
| if (!parent() && (!isFirstLine() || &lineStyle == &renderer().style())) |
| return; |
| |
| LayoutPoint adjustedPaintoffset = paintOffset + localRect.location(); |
| GraphicsContext* context = paintInfo.context; |
| LayoutRect paintRect = LayoutRect(adjustedPaintoffset, frameRect.size()); |
| // Shadow comes first and is behind the background and border. |
| if (!renderer().boxShadowShouldBeAppliedToBackground(BackgroundBleedNone, this)) |
| paintBoxShadow(paintInfo, lineStyle, Normal, paintRect); |
| |
| Color c = lineStyle.visitedDependentColor(CSSPropertyBackgroundColor); |
| paintFillLayers(paintInfo, c, lineStyle.backgroundLayers(), paintRect); |
| paintBoxShadow(paintInfo, lineStyle, Inset, paintRect); |
| |
| // :first-line cannot be used to put borders on a line. Always paint borders with our |
| // non-first-line style. |
| if (!parent() || !renderer().style().hasBorder()) |
| return; |
| const NinePieceImage& borderImage = renderer().style().borderImage(); |
| StyleImage* borderImageSource = borderImage.image(); |
| bool hasBorderImage = borderImageSource && borderImageSource->canRender(&renderer(), lineStyle.effectiveZoom()); |
| if (hasBorderImage && !borderImageSource->isLoaded()) |
| return; // Don't paint anything while we wait for the image to load. |
| |
| // The simple case is where we either have no border image or we are the only box for this object. In those |
| // cases only a single call to draw is required. |
| if (!hasBorderImage || (!prevLineBox() && !nextLineBox())) |
| renderer().paintBorder(paintInfo, paintRect, lineStyle, BackgroundBleedNone, includeLogicalLeftEdge(), includeLogicalRightEdge()); |
| else { |
| // We have a border image that spans multiple lines. |
| // We need to adjust tx and ty by the width of all previous lines. |
| // Think of border image painting on inlines as though you had one long line, a single continuous |
| // strip. Even though that strip has been broken up across multiple lines, you still paint it |
| // as though you had one single line. This means each line has to pick up the image where |
| // the previous line left off. |
| // FIXME: What the heck do we do with RTL here? The math we're using is obviously not right, |
| // but it isn't even clear how this should work at all. |
| LayoutUnit logicalOffsetOnLine = 0; |
| for (InlineFlowBox* curr = prevLineBox(); curr; curr = curr->prevLineBox()) |
| logicalOffsetOnLine += curr->logicalWidth(); |
| LayoutUnit totalLogicalWidth = logicalOffsetOnLine; |
| for (InlineFlowBox* curr = this; curr; curr = curr->nextLineBox()) |
| totalLogicalWidth += curr->logicalWidth(); |
| LayoutUnit stripX = adjustedPaintoffset.x() - (isHorizontal() ? logicalOffsetOnLine : LayoutUnit()); |
| LayoutUnit stripY = adjustedPaintoffset.y() - (isHorizontal() ? LayoutUnit() : logicalOffsetOnLine); |
| LayoutUnit stripWidth = isHorizontal() ? totalLogicalWidth : frameRect.width(); |
| LayoutUnit stripHeight = isHorizontal() ? frameRect.height() : totalLogicalWidth; |
| |
| LayoutRect clipRect = clipRectForNinePieceImageStrip(this, borderImage, paintRect); |
| GraphicsContextStateSaver stateSaver(*context); |
| context->clip(clipRect); |
| renderer().paintBorder(paintInfo, LayoutRect(stripX, stripY, stripWidth, stripHeight), lineStyle); |
| } |
| } |
| |
| void InlineFlowBox::paintMask(PaintInfo& paintInfo, const LayoutPoint& paintOffset) |
| { |
| if (!paintInfo.shouldPaintWithinRoot(renderer()) || renderer().style().visibility() != VISIBLE || paintInfo.phase != PaintPhaseMask) |
| return; |
| |
| LayoutRect frameRect(this->frameRect()); |
| constrainToLineTopAndBottomIfNeeded(frameRect); |
| |
| // Move x/y to our coordinates. |
| LayoutRect localRect(frameRect); |
| flipForWritingMode(localRect); |
| LayoutPoint adjustedPaintOffset = paintOffset + localRect.location(); |
| |
| const NinePieceImage& maskNinePieceImage = renderer().style().maskBoxImage(); |
| StyleImage* maskBoxImage = renderer().style().maskBoxImage().image(); |
| |
| // Figure out if we need to push a transparency layer to render our mask. |
| bool pushTransparencyLayer = false; |
| bool compositedMask = renderer().hasLayer() && renderer().layer()->hasCompositedMask(); |
| bool flattenCompositingLayers = renderer().view().frameView().paintBehavior() & PaintBehaviorFlattenCompositingLayers; |
| CompositeOperator compositeOp = CompositeSourceOver; |
| if (!compositedMask || flattenCompositingLayers) { |
| if ((maskBoxImage && renderer().style().maskLayers()->hasImage()) || renderer().style().maskLayers()->next()) |
| pushTransparencyLayer = true; |
| |
| compositeOp = CompositeDestinationIn; |
| if (pushTransparencyLayer) { |
| paintInfo.context->setCompositeOperation(CompositeDestinationIn); |
| paintInfo.context->beginTransparencyLayer(1.0f); |
| compositeOp = CompositeSourceOver; |
| } |
| } |
| |
| LayoutRect paintRect = LayoutRect(adjustedPaintOffset, frameRect.size()); |
| paintFillLayers(paintInfo, Color(), renderer().style().maskLayers(), paintRect, compositeOp); |
| |
| bool hasBoxImage = maskBoxImage && maskBoxImage->canRender(&renderer(), renderer().style().effectiveZoom()); |
| if (!hasBoxImage || !maskBoxImage->isLoaded()) { |
| if (pushTransparencyLayer) |
| paintInfo.context->endTransparencyLayer(); |
| return; // Don't paint anything while we wait for the image to load. |
| } |
| |
| // The simple case is where we are the only box for this object. In those |
| // cases only a single call to draw is required. |
| if (!prevLineBox() && !nextLineBox()) { |
| renderer().paintNinePieceImage(paintInfo.context, LayoutRect(adjustedPaintOffset, frameRect.size()), renderer().style(), maskNinePieceImage, compositeOp); |
| } else { |
| // We have a mask image that spans multiple lines. |
| // We need to adjust _tx and _ty by the width of all previous lines. |
| LayoutUnit logicalOffsetOnLine = 0; |
| for (InlineFlowBox* curr = prevLineBox(); curr; curr = curr->prevLineBox()) |
| logicalOffsetOnLine += curr->logicalWidth(); |
| LayoutUnit totalLogicalWidth = logicalOffsetOnLine; |
| for (InlineFlowBox* curr = this; curr; curr = curr->nextLineBox()) |
| totalLogicalWidth += curr->logicalWidth(); |
| LayoutUnit stripX = adjustedPaintOffset.x() - (isHorizontal() ? logicalOffsetOnLine : LayoutUnit()); |
| LayoutUnit stripY = adjustedPaintOffset.y() - (isHorizontal() ? LayoutUnit() : logicalOffsetOnLine); |
| LayoutUnit stripWidth = isHorizontal() ? totalLogicalWidth : frameRect.width(); |
| LayoutUnit stripHeight = isHorizontal() ? frameRect.height() : totalLogicalWidth; |
| |
| LayoutRect clipRect = clipRectForNinePieceImageStrip(this, maskNinePieceImage, paintRect); |
| GraphicsContextStateSaver stateSaver(*paintInfo.context); |
| paintInfo.context->clip(clipRect); |
| renderer().paintNinePieceImage(paintInfo.context, LayoutRect(stripX, stripY, stripWidth, stripHeight), renderer().style(), maskNinePieceImage, compositeOp); |
| } |
| |
| if (pushTransparencyLayer) |
| paintInfo.context->endTransparencyLayer(); |
| } |
| |
| InlineBox* InlineFlowBox::firstLeafChild() const |
| { |
| InlineBox* leaf = 0; |
| for (InlineBox* child = firstChild(); child && !leaf; child = child->nextOnLine()) |
| leaf = child->isLeaf() ? child : toInlineFlowBox(child)->firstLeafChild(); |
| return leaf; |
| } |
| |
| InlineBox* InlineFlowBox::lastLeafChild() const |
| { |
| InlineBox* leaf = 0; |
| for (InlineBox* child = lastChild(); child && !leaf; child = child->prevOnLine()) |
| leaf = child->isLeaf() ? child : toInlineFlowBox(child)->lastLeafChild(); |
| return leaf; |
| } |
| |
| RenderObject::SelectionState InlineFlowBox::selectionState() |
| { |
| return RenderObject::SelectionNone; |
| } |
| |
| bool InlineFlowBox::canAccommodateEllipsis(bool ltr, int blockEdge, int ellipsisWidth) const |
| { |
| for (InlineBox *box = firstChild(); box; box = box->nextOnLine()) { |
| if (!box->canAccommodateEllipsis(ltr, blockEdge, ellipsisWidth)) |
| return false; |
| } |
| return true; |
| } |
| |
| float InlineFlowBox::placeEllipsisBox(bool ltr, float blockLeftEdge, float blockRightEdge, float ellipsisWidth, float &truncatedWidth, bool& foundBox) |
| { |
| float result = -1; |
| // We iterate over all children, the foundBox variable tells us when we've found the |
| // box containing the ellipsis. All boxes after that one in the flow are hidden. |
| // If our flow is ltr then iterate over the boxes from left to right, otherwise iterate |
| // from right to left. Varying the order allows us to correctly hide the boxes following the ellipsis. |
| InlineBox* box = ltr ? firstChild() : lastChild(); |
| |
| // NOTE: these will cross after foundBox = true. |
| int visibleLeftEdge = blockLeftEdge; |
| int visibleRightEdge = blockRightEdge; |
| |
| while (box) { |
| int currResult = box->placeEllipsisBox(ltr, visibleLeftEdge, visibleRightEdge, ellipsisWidth, truncatedWidth, foundBox); |
| if (currResult != -1 && result == -1) |
| result = currResult; |
| |
| if (ltr) { |
| visibleLeftEdge += box->logicalWidth(); |
| box = box->nextOnLine(); |
| } |
| else { |
| visibleRightEdge -= box->logicalWidth(); |
| box = box->prevOnLine(); |
| } |
| } |
| return result; |
| } |
| |
| void InlineFlowBox::clearTruncation() |
| { |
| for (InlineBox *box = firstChild(); box; box = box->nextOnLine()) |
| box->clearTruncation(); |
| } |
| |
| LayoutUnit InlineFlowBox::computeOverAnnotationAdjustment(LayoutUnit allowedPosition) const |
| { |
| LayoutUnit result = 0; |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (curr->isInlineFlowBox()) |
| result = std::max(result, toInlineFlowBox(curr)->computeOverAnnotationAdjustment(allowedPosition)); |
| |
| if (curr->renderer().isReplaced() && curr->renderer().isRubyRun() && curr->renderer().style().rubyPosition() == RubyPositionBefore) { |
| RenderRubyRun& rubyRun = toRenderRubyRun(curr->renderer()); |
| RenderRubyText* rubyText = rubyRun.rubyText(); |
| if (!rubyText) |
| continue; |
| |
| if (!rubyRun.style().isFlippedLinesWritingMode()) { |
| LayoutUnit topOfFirstRubyTextLine = rubyText->logicalTop() + (rubyText->firstRootBox() ? rubyText->firstRootBox()->lineTop() : LayoutUnit()); |
| if (topOfFirstRubyTextLine >= 0) |
| continue; |
| topOfFirstRubyTextLine += curr->logicalTop(); |
| result = std::max(result, allowedPosition - topOfFirstRubyTextLine); |
| } else { |
| LayoutUnit bottomOfLastRubyTextLine = rubyText->logicalTop() + (rubyText->lastRootBox() ? rubyText->lastRootBox()->lineBottom() : rubyText->logicalHeight()); |
| if (bottomOfLastRubyTextLine <= curr->logicalHeight()) |
| continue; |
| bottomOfLastRubyTextLine += curr->logicalTop(); |
| result = std::max(result, bottomOfLastRubyTextLine - allowedPosition); |
| } |
| } |
| |
| if (curr->isInlineTextBox()) { |
| const RenderStyle& childLineStyle = curr->lineStyle(); |
| bool emphasisMarkIsAbove; |
| if (childLineStyle.textEmphasisMark() != TextEmphasisMarkNone && toInlineTextBox(curr)->emphasisMarkExistsAndIsAbove(childLineStyle, emphasisMarkIsAbove) && emphasisMarkIsAbove) { |
| if (!childLineStyle.isFlippedLinesWritingMode()) { |
| int topOfEmphasisMark = curr->logicalTop() - childLineStyle.font().emphasisMarkHeight(childLineStyle.textEmphasisMarkString()); |
| result = std::max(result, allowedPosition - topOfEmphasisMark); |
| } else { |
| int bottomOfEmphasisMark = curr->logicalBottom() + childLineStyle.font().emphasisMarkHeight(childLineStyle.textEmphasisMarkString()); |
| result = std::max(result, bottomOfEmphasisMark - allowedPosition); |
| } |
| } |
| } |
| } |
| return result; |
| } |
| |
| LayoutUnit InlineFlowBox::computeUnderAnnotationAdjustment(LayoutUnit allowedPosition) const |
| { |
| LayoutUnit result = 0; |
| for (InlineBox* curr = firstChild(); curr; curr = curr->nextOnLine()) { |
| if (curr->renderer().isOutOfFlowPositioned()) |
| continue; // Positioned placeholders don't affect calculations. |
| |
| if (curr->isInlineFlowBox()) |
| result = std::max(result, toInlineFlowBox(curr)->computeUnderAnnotationAdjustment(allowedPosition)); |
| |
| if (curr->renderer().isReplaced() && curr->renderer().isRubyRun() && curr->renderer().style().rubyPosition() == RubyPositionAfter) { |
| RenderRubyRun& rubyRun = toRenderRubyRun(curr->renderer()); |
| RenderRubyText* rubyText = rubyRun.rubyText(); |
| if (!rubyText) |
| continue; |
| |
| if (rubyRun.style().isFlippedLinesWritingMode()) { |
| LayoutUnit topOfFirstRubyTextLine = rubyText->logicalTop() + (rubyText->firstRootBox() ? rubyText->firstRootBox()->lineTop() : LayoutUnit()); |
| if (topOfFirstRubyTextLine >= 0) |
| continue; |
| topOfFirstRubyTextLine += curr->logicalTop(); |
| result = std::max(result, allowedPosition - topOfFirstRubyTextLine); |
| } else { |
| LayoutUnit bottomOfLastRubyTextLine = rubyText->logicalTop() + (rubyText->lastRootBox() ? rubyText->lastRootBox()->lineBottom() : rubyText->logicalHeight()); |
| if (bottomOfLastRubyTextLine <= curr->logicalHeight()) |
| continue; |
| bottomOfLastRubyTextLine += curr->logicalTop(); |
| result = std::max(result, bottomOfLastRubyTextLine - allowedPosition); |
| } |
| } |
| |
| if (curr->isInlineTextBox()) { |
| const RenderStyle& childLineStyle = curr->lineStyle(); |
| bool emphasisMarkIsAbove; |
| toInlineTextBox(curr)->emphasisMarkExistsAndIsAbove(childLineStyle, emphasisMarkIsAbove); |
| if (childLineStyle.textEmphasisMark() != TextEmphasisMarkNone && !emphasisMarkIsAbove) { |
| if (!childLineStyle.isFlippedLinesWritingMode()) { |
| LayoutUnit bottomOfEmphasisMark = curr->logicalBottom() + childLineStyle.font().emphasisMarkHeight(childLineStyle.textEmphasisMarkString()); |
| result = std::max(result, bottomOfEmphasisMark - allowedPosition); |
| } else { |
| LayoutUnit topOfEmphasisMark = curr->logicalTop() - childLineStyle.font().emphasisMarkHeight(childLineStyle.textEmphasisMarkString()); |
| result = std::max(result, allowedPosition - topOfEmphasisMark); |
| } |
| } |
| } |
| } |
| return result; |
| } |
| |
| void InlineFlowBox::collectLeafBoxesInLogicalOrder(Vector<InlineBox*>& leafBoxesInLogicalOrder, CustomInlineBoxRangeReverse customReverseImplementation, void* userData) const |
| { |
| InlineBox* leaf = firstLeafChild(); |
| |
| // FIXME: The reordering code is a copy of parts from BidiResolver::createBidiRunsForLine, operating directly on InlineBoxes, instead of BidiRuns. |
| // Investigate on how this code could possibly be shared. |
| unsigned char minLevel = 128; |
| unsigned char maxLevel = 0; |
| |
| // First find highest and lowest levels, and initialize leafBoxesInLogicalOrder with the leaf boxes in visual order. |
| for (; leaf; leaf = leaf->nextLeafChild()) { |
| minLevel = std::min(minLevel, leaf->bidiLevel()); |
| maxLevel = std::max(maxLevel, leaf->bidiLevel()); |
| leafBoxesInLogicalOrder.append(leaf); |
| } |
| |
| if (renderer().style().rtlOrdering() == VisualOrder) |
| return; |
| |
| // Reverse of reordering of the line (L2 according to Bidi spec): |
| // L2. From the highest level found in the text to the lowest odd level on each line, |
| // reverse any contiguous sequence of characters that are at that level or higher. |
| |
| // Reversing the reordering of the line is only done up to the lowest odd level. |
| if (!(minLevel % 2)) |
| ++minLevel; |
| |
| Vector<InlineBox*>::iterator end = leafBoxesInLogicalOrder.end(); |
| while (minLevel <= maxLevel) { |
| Vector<InlineBox*>::iterator it = leafBoxesInLogicalOrder.begin(); |
| while (it != end) { |
| while (it != end) { |
| if ((*it)->bidiLevel() >= minLevel) |
| break; |
| ++it; |
| } |
| Vector<InlineBox*>::iterator first = it; |
| while (it != end) { |
| if ((*it)->bidiLevel() < minLevel) |
| break; |
| ++it; |
| } |
| Vector<InlineBox*>::iterator last = it; |
| if (customReverseImplementation) { |
| ASSERT(userData); |
| (*customReverseImplementation)(userData, first, last); |
| } else |
| std::reverse(first, last); |
| } |
| ++minLevel; |
| } |
| } |
| |
| void InlineFlowBox::computeReplacedAndTextLineTopAndBottom(LayoutUnit& lineTop, LayoutUnit& lineBottom) const |
| { |
| for (const auto* box = firstChild(); box; box = box->nextOnLine()) { |
| if (box->isInlineFlowBox()) |
| toInlineFlowBox(box)->computeReplacedAndTextLineTopAndBottom(lineTop, lineBottom); |
| else { |
| if (box->logicalTop() < lineTop) |
| lineTop = box->logicalTop(); |
| if (box->logicalBottom() > lineBottom) |
| lineBottom = box->logicalBottom(); |
| } |
| } |
| } |
| |
| #ifndef NDEBUG |
| |
| const char* InlineFlowBox::boxName() const |
| { |
| return "InlineFlowBox"; |
| } |
| |
| void InlineFlowBox::showLineTreeAndMark(const InlineBox* markedBox1, const char* markedLabel1, const InlineBox* markedBox2, const char* markedLabel2, const RenderObject* obj, int depth) const |
| { |
| InlineBox::showLineTreeAndMark(markedBox1, markedLabel1, markedBox2, markedLabel2, obj, depth); |
| for (const InlineBox* box = firstChild(); box; box = box->nextOnLine()) |
| box->showLineTreeAndMark(markedBox1, markedLabel1, markedBox2, markedLabel2, obj, depth + 1); |
| } |
| |
| void InlineFlowBox::checkConsistency() const |
| { |
| assertNotDeleted(); |
| ASSERT_WITH_SECURITY_IMPLICATION(!m_hasBadChildList); |
| #ifdef CHECK_CONSISTENCY |
| const InlineBox* previousChild = nullptr; |
| for (const InlineBox* child = firstChild(); child; child = child->nextOnLine()) { |
| ASSERT(child->parent() == this); |
| ASSERT(child->prevOnLine() == previousChild); |
| previousChild = child; |
| } |
| ASSERT(previousChild == m_lastChild); |
| #endif |
| } |
| |
| #endif |
| |
| } // namespace WebCore |
