chore(docs): Add new discovery artifacts and reference documents
diff --git a/docs/dyn/accessapproval_v1.folders.html b/docs/dyn/accessapproval_v1.folders.html index 8833519..1a6402d 100644 --- a/docs/dyn/accessapproval_v1.folders.html +++ b/docs/dyn/accessapproval_v1.folders.html
@@ -133,7 +133,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -157,7 +157,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -180,7 +180,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ],
diff --git a/docs/dyn/accessapproval_v1.organizations.html b/docs/dyn/accessapproval_v1.organizations.html index 1a9b7c5..89ed040 100644 --- a/docs/dyn/accessapproval_v1.organizations.html +++ b/docs/dyn/accessapproval_v1.organizations.html
@@ -133,7 +133,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -157,7 +157,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -180,7 +180,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ],
diff --git a/docs/dyn/accessapproval_v1.projects.html b/docs/dyn/accessapproval_v1.projects.html index e97a645..fbd0b40 100644 --- a/docs/dyn/accessapproval_v1.projects.html +++ b/docs/dyn/accessapproval_v1.projects.html
@@ -133,7 +133,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -157,7 +157,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ], @@ -180,7 +180,7 @@ "enrolledAncestor": True or False, # Output only. This field is read only (not settable via UpdateAccessAccessApprovalSettings method). If the field is true, that indicates that at least one service is enrolled for Access Approval in one or more ancestors of the Project or Folder (this field will always be unset for the organization since organizations do not have ancestors). "enrolledServices": [ # A list of Google Cloud Services for which the given resource has Access Approval enrolled. Access requests for the resource given by name against any of these services contained here will be required to have explicit approval. If name refers to an organization, enrollment can be done for individual services. If name refers to a folder or project, enrollment can only be done on an all or nothing basis. If a cloud_product is repeated in this list, the first entry will be honored and all following entries will be discarded. A maximum of 10 enrolled services will be enforced, to be expanded as the set of supported services is expanded. { # Represents the enrollment of a cloud resource into a specific service. - "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Google Kubernetes Engine * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * container.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services + "cloudProduct": "A String", # The product for which Access Approval will be enrolled. Allowed values are listed below (case-sensitive): * all * App Engine * BigQuery * Cloud Bigtable * Cloud Key Management Service * Compute Engine * Cloud Dataflow * Cloud Identity and Access Management * Cloud Logging * Cloud Pub/Sub * Cloud Spanner * Cloud Storage * Persistent Disk Note: These values are supported as input for legacy purposes, but will not be returned from the API. * all * appengine.googleapis.com * bigquery.googleapis.com * bigtable.googleapis.com * cloudkms.googleapis.com * compute.googleapis.com * dataflow.googleapis.com * iam.googleapis.com * logging.googleapis.com * pubsub.googleapis.com * spanner.googleapis.com * storage.googleapis.com Calls to UpdateAccessApprovalSettings using 'all' or any of the XXX.googleapis.com will be translated to the associated product name ('all', 'App Engine', etc.). Note: 'all' will enroll the resource in all products supported at both 'GA' and 'Preview' levels. More information about levels of support is available at https://cloud.google.com/access-approval/docs/supported-services "enrollmentLevel": "A String", # The enrollment level of the service. }, ],
diff --git a/docs/dyn/bigtableadmin_v2.projects.instances.clusters.html b/docs/dyn/bigtableadmin_v2.projects.instances.clusters.html index a5440eb..d9ead7c 100644 --- a/docs/dyn/bigtableadmin_v2.projects.instances.clusters.html +++ b/docs/dyn/bigtableadmin_v2.projects.instances.clusters.html
@@ -98,11 +98,8 @@ <code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p> <p class="firstline">Retrieves the next page of results.</p> <p class="toc_element"> - <code><a href="#partialUpdateCluster">partialUpdateCluster(name, body=None, updateMask=None, x__xgafv=None)</a></code></p> -<p class="firstline">Partially updates a cluster within a project. This method is the preferred way to update a Cluster. </p> -<p class="toc_element"> <code><a href="#update">update(name, body=None, x__xgafv=None)</a></code></p> -<p class="firstline">Updates a cluster within an instance. UpdateCluster is deprecated. Please use PartialUpdateCluster instead.</p> +<p class="firstline">Updates a cluster within an instance.</p> <h3>Method Details</h3> <div class="method"> <code class="details" id="close">close()</code> @@ -253,58 +250,8 @@ </div> <div class="method"> - <code class="details" id="partialUpdateCluster">partialUpdateCluster(name, body=None, updateMask=None, x__xgafv=None)</code> - <pre>Partially updates a cluster within a project. This method is the preferred way to update a Cluster. - -Args: - name: string, The unique name of the cluster. Values are of the form `projects/{project}/instances/{instance}/clusters/a-z*`. (required) - body: object, The request body. - The object takes the form of: - -{ # A resizable group of nodes in a particular cloud location, capable of serving all Tables in the parent Instance. - "defaultStorageType": "A String", # Immutable. The type of storage used by this cluster to serve its parent instance's tables, unless explicitly overridden. - "encryptionConfig": { # Cloud Key Management Service (Cloud KMS) settings for a CMEK-protected cluster. # Immutable. The encryption configuration for CMEK-protected clusters. - "kmsKeyName": "A String", # Describes the Cloud KMS encryption key that will be used to protect the destination Bigtable cluster. The requirements for this key are: 1) The Cloud Bigtable service account associated with the project that contains this cluster must be granted the `cloudkms.cryptoKeyEncrypterDecrypter` role on the CMEK key. 2) Only regional keys can be used and the region of the CMEK key must match the region of the cluster. 3) All clusters within an instance must use the same CMEK key. Values are of the form `projects/{project}/locations/{location}/keyRings/{keyring}/cryptoKeys/{key}` - }, - "location": "A String", # Immutable. The location where this cluster's nodes and storage reside. For best performance, clients should be located as close as possible to this cluster. Currently only zones are supported, so values should be of the form `projects/{project}/locations/{zone}`. - "name": "A String", # The unique name of the cluster. Values are of the form `projects/{project}/instances/{instance}/clusters/a-z*`. - "serveNodes": 42, # Required. The number of nodes allocated to this cluster. More nodes enable higher throughput and more consistent performance. - "state": "A String", # Output only. The current state of the cluster. -} - - updateMask: string, Required. The subset of Cluster fields which should be replaced. Must be explicitly set. - x__xgafv: string, V1 error format. - Allowed values - 1 - v1 error format - 2 - v2 error format - -Returns: - An object of the form: - - { # This resource represents a long-running operation that is the result of a network API call. - "done": True or False, # If the value is `false`, it means the operation is still in progress. If `true`, the operation is completed, and either `error` or `response` is available. - "error": { # The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors). # The error result of the operation in case of failure or cancellation. - "code": 42, # The status code, which should be an enum value of google.rpc.Code. - "details": [ # A list of messages that carry the error details. There is a common set of message types for APIs to use. - { - "a_key": "", # Properties of the object. Contains field @type with type URL. - }, - ], - "message": "A String", # A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client. - }, - "metadata": { # Service-specific metadata associated with the operation. It typically contains progress information and common metadata such as create time. Some services might not provide such metadata. Any method that returns a long-running operation should document the metadata type, if any. - "a_key": "", # Properties of the object. Contains field @type with type URL. - }, - "name": "A String", # The server-assigned name, which is only unique within the same service that originally returns it. If you use the default HTTP mapping, the `name` should be a resource name ending with `operations/{unique_id}`. - "response": { # The normal response of the operation in case of success. If the original method returns no data on success, such as `Delete`, the response is `google.protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`, the response should be the resource. For other methods, the response should have the type `XxxResponse`, where `Xxx` is the original method name. For example, if the original method name is `TakeSnapshot()`, the inferred response type is `TakeSnapshotResponse`. - "a_key": "", # Properties of the object. Contains field @type with type URL. - }, -}</pre> -</div> - -<div class="method"> <code class="details" id="update">update(name, body=None, x__xgafv=None)</code> - <pre>Updates a cluster within an instance. UpdateCluster is deprecated. Please use PartialUpdateCluster instead. + <pre>Updates a cluster within an instance. Args: name: string, The unique name of the cluster. Values are of the form `projects/{project}/instances/{instance}/clusters/a-z*`. (required)
diff --git a/docs/dyn/bigtableadmin_v2.projects.instances.tables.html b/docs/dyn/bigtableadmin_v2.projects.instances.tables.html index eb8aaf2..170fa95 100644 --- a/docs/dyn/bigtableadmin_v2.projects.instances.tables.html +++ b/docs/dyn/bigtableadmin_v2.projects.instances.tables.html
@@ -359,7 +359,7 @@ NAME_ONLY - Only populates `name`. SCHEMA_VIEW - Only populates `name` and fields related to the table's schema. REPLICATION_VIEW - Only populates `name` and fields related to the table's replication state. - ENCRYPTION_VIEW - Only populates `name` and fields related to the table's encryption state. + ENCRYPTION_VIEW - Only populates 'name' and fields related to the table's encryption state. FULL - Populates all fields. x__xgafv: string, V1 error format. Allowed values @@ -492,7 +492,7 @@ NAME_ONLY - Only populates `name`. SCHEMA_VIEW - Only populates `name` and fields related to the table's schema. REPLICATION_VIEW - Only populates `name` and fields related to the table's replication state. - ENCRYPTION_VIEW - Only populates `name` and fields related to the table's encryption state. + ENCRYPTION_VIEW - Only populates 'name' and fields related to the table's encryption state. FULL - Populates all fields. x__xgafv: string, V1 error format. Allowed values
diff --git a/docs/dyn/dns_v1.managedZoneOperations.html b/docs/dyn/dns_v1.managedZoneOperations.html index f1c3b99..16b7098 100644 --- a/docs/dyn/dns_v1.managedZoneOperations.html +++ b/docs/dyn/dns_v1.managedZoneOperations.html
@@ -318,7 +318,7 @@ "header": { # Elements common to every response. "operationId": "A String", # For mutating operation requests that completed successfully. This is the client_operation_id if the client specified it, otherwise it is generated by the server (output only). }, - "kind": "dns#managedZoneOperationsListResponse", # Type of resource. + "kind": "dns#managedZoneOperationsListResponse", "nextPageToken": "A String", # The presence of this field indicates that there exist more results following your last page of results in pagination order. To fetch them, make another list request using this value as your page token. This lets you retrieve the complete contents of even very large collections one page at a time. However, if the contents of the collection change between the first and last paginated list request, the set of all elements returned are an inconsistent view of the collection. You cannot retrieve a consistent snapshot of a collection larger than the maximum page size. "operations": [ # The operation resources. { # An operation represents a successful mutation performed on a Cloud DNS resource. Operations provide: - An audit log of server resource mutations. - A way to recover/retry API calls in the case where the response is never received by the caller. Use the caller specified client_operation_id.
diff --git a/docs/dyn/dns_v1beta2.managedZoneOperations.html b/docs/dyn/dns_v1beta2.managedZoneOperations.html index 1c7da52..655b404 100644 --- a/docs/dyn/dns_v1beta2.managedZoneOperations.html +++ b/docs/dyn/dns_v1beta2.managedZoneOperations.html
@@ -202,12 +202,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -276,12 +270,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -332,7 +320,7 @@ "header": { # Elements common to every response. "operationId": "A String", # For mutating operation requests that completed successfully. This is the client_operation_id if the client specified it, otherwise it is generated by the server (output only). }, - "kind": "dns#managedZoneOperationsListResponse", # Type of resource. + "kind": "dns#managedZoneOperationsListResponse", "nextPageToken": "A String", # The presence of this field indicates that there exist more results following your last page of results in pagination order. To fetch them, make another list request using this value as your page token. This lets you retrieve the complete contents of even very large collections one page at a time. However, if the contents of the collection change between the first and last paginated list request, the set of all elements returned are an inconsistent view of the collection. You cannot retrieve a consistent snapshot of a collection larger than the maximum page size. "operations": [ # The operation resources. { # An operation represents a successful mutation performed on a Cloud DNS resource. Operations provide: - An audit log of server resource mutations. - A way to recover/retry API calls in the case where the response is never received by the caller. Use the caller specified client_operation_id. @@ -428,12 +416,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -502,12 +484,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. {
diff --git a/docs/dyn/dns_v1beta2.managedZones.html b/docs/dyn/dns_v1beta2.managedZones.html index 7d0e058..ec5bd68 100644 --- a/docs/dyn/dns_v1beta2.managedZones.html +++ b/docs/dyn/dns_v1beta2.managedZones.html
@@ -160,12 +160,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -244,12 +238,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -351,12 +339,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -450,12 +432,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -553,12 +529,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -683,12 +653,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -757,12 +721,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -845,12 +803,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -975,12 +927,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. { @@ -1049,12 +995,6 @@ }, }, "privateVisibilityConfig": { # For privately visible zones, the set of Virtual Private Cloud resources that the zone is visible from. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters that can see this zone. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this ManagedZone to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#managedZonePrivateVisibilityConfigGKECluster", - }, - ], "kind": "dns#managedZonePrivateVisibilityConfig", "networks": [ # The list of VPC networks that can see this zone. {
diff --git a/docs/dyn/dns_v1beta2.projects.html b/docs/dyn/dns_v1beta2.projects.html index 6eaf3d1..30fe583 100644 --- a/docs/dyn/dns_v1beta2.projects.html +++ b/docs/dyn/dns_v1beta2.projects.html
@@ -112,10 +112,8 @@ "number": "A String", # Unique numeric identifier for the resource; defined by the server (output only). "quota": { # Limits associated with a Project. # Quotas assigned to this project (output only). "dnsKeysPerManagedZone": 42, # Maximum allowed number of DnsKeys per ManagedZone. - "gkeClustersPerManagedZone": 42, # Maximum allowed number of GKE clusters to which a privately scoped zone can be attached. "kind": "dns#quota", "managedZones": 42, # Maximum allowed number of managed zones in the project. - "managedZonesPerGkeCluster": 42, # Maximum allowed number of managed zones which can be attached to a GKE cluster. "managedZonesPerNetwork": 42, # Maximum allowed number of managed zones which can be attached to a network. "networksPerManagedZone": 42, # Maximum allowed number of networks to which a privately scoped zone can be attached. "networksPerPolicy": 42, # Maximum allowed number of networks per policy.
diff --git a/docs/dyn/dns_v1beta2.responsePolicies.html b/docs/dyn/dns_v1beta2.responsePolicies.html index 2ec8068..fc7383a 100644 --- a/docs/dyn/dns_v1beta2.responsePolicies.html +++ b/docs/dyn/dns_v1beta2.responsePolicies.html
@@ -115,12 +115,6 @@ { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -143,12 +137,6 @@ { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -194,12 +182,6 @@ { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -236,12 +218,6 @@ "responsePolicies": [ # The Response Policy resources. { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -282,12 +258,6 @@ { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -314,12 +284,6 @@ }, "responsePolicy": { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -345,12 +309,6 @@ { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied. @@ -377,12 +335,6 @@ }, "responsePolicy": { # A Response Policy is a collection of selectors that apply to queries made against one or more Virtual Private Cloud networks. "description": "A String", # User-provided description for this Response Policy. - "gkeClusters": [ # The list of Google Kubernetes Engine clusters to which this response policy is applied. - { - "gkeClusterName": "A String", # The resource name of the cluster to bind this response policy to. This should be specified in the format like: projects/*/locations/*/clusters/*. This is referenced from GKE projects.locations.clusters.get API: https://cloud.google.com/kubernetes-engine/docs/reference/rest/v1/projects.locations.clusters/get - "kind": "dns#responsePolicyGKECluster", - }, - ], "id": "A String", # Unique identifier for the resource; defined by the server (output only). "kind": "dns#responsePolicy", "networks": [ # List of network names specifying networks to which this policy is applied.
diff --git a/docs/dyn/firestore_v1.projects.databases.documents.html b/docs/dyn/firestore_v1.projects.databases.documents.html index dc47e0d..40e9d55 100644 --- a/docs/dyn/firestore_v1.projects.databases.documents.html +++ b/docs/dyn/firestore_v1.projects.databases.documents.html
@@ -175,11 +175,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -234,16 +230,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -263,11 +274,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -287,11 +294,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -312,7 +315,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -323,11 +345,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -359,16 +377,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -388,11 +421,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -412,11 +441,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -437,7 +462,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -471,11 +515,7 @@ { # The result of applying a write. "transformResults": [ # The results of applying each DocumentTransform.FieldTransform, in the same order. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -563,16 +603,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -592,11 +647,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -616,11 +667,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -641,7 +688,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -652,11 +718,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -688,16 +750,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -717,11 +794,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -741,11 +814,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -766,7 +835,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -790,11 +878,7 @@ { # The result of applying a write. "transformResults": [ # The results of applying each DocumentTransform.FieldTransform, in the same order. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -834,11 +918,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -876,11 +956,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -946,11 +1022,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1003,11 +1075,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1117,11 +1185,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1169,11 +1233,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1207,11 +1267,7 @@ }, "op": "A String", # The operator to filter by. "value": { # A message that can hold any of the supported value types. # The value to compare to. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1264,11 +1320,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1354,11 +1406,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1406,11 +1454,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1444,11 +1488,7 @@ }, "op": "A String", # The operator to filter by. "value": { # A message that can hold any of the supported value types. # The value to compare to. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1493,11 +1533,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1549,11 +1585,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1593,11 +1625,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1671,11 +1699,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1723,11 +1747,7 @@ "before": True or False, # If the position is just before or just after the given values, relative to the sort order defined by the query. "values": [ # The values that represent a position, in the order they appear in the order by clause of a query. Can contain fewer values than specified in the order by clause. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1761,11 +1781,7 @@ }, "op": "A String", # The operator to filter by. "value": { # A message that can hold any of the supported value types. # The value to compare to. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1809,11 +1825,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1870,16 +1882,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1899,11 +1926,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1923,11 +1946,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1948,7 +1967,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -1959,11 +1997,7 @@ "createTime": "A String", # Output only. The time at which the document was created. This value increases monotonically when a document is deleted then recreated. It can also be compared to values from other documents and the `read_time` of a query. "fields": { # The document's fields. The map keys represent field names. A simple field name contains only characters `a` to `z`, `A` to `Z`, `0` to `9`, or `_`, and must not start with `0` to `9`. For example, `foo_bar_17`. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. Field paths may be used in other contexts to refer to structured fields defined here. For `map_value`, the field path is represented by the simple or quoted field names of the containing fields, delimited by `.`. For example, the structured field `"foo" : { map_value: { "x&y" : { string_value: "hello" }}}` would be represented by the field path `foo.x&y`. Within a field path, a quoted field name starts and ends with `` ` `` and may contain any character. Some characters, including `` ` ``, must be escaped using a `\`. For example, `` `x&y` `` represents `x&y` and `` `bak\`tik` `` represents `` bak`tik ``. "a_key": { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -1995,16 +2029,31 @@ { # A transformation of a field of the document. "appendMissingElements": { # An array value. # Append the given elements in order if they are not already present in the current field value. If the field is not an array, or if the field does not yet exist, it is first set to the empty array. Equivalent numbers of different types (e.g. 3L and 3.0) are considered equal when checking if a value is missing. NaN is equal to NaN, and Null is equal to Null. If the input contains multiple equivalent values, only the first will be considered. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "fieldPath": "A String", # The path of the field. See Document.fields for the field path syntax reference. "increment": { # A message that can hold any of the supported value types. # Adds the given value to the field's current value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If either of the given value or the current field value are doubles, both values will be interpreted as doubles. Double arithmetic and representation of double values follow IEEE 754 semantics. If there is positive/negative integer overflow, the field is resolved to the largest magnitude positive/negative integer. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -2024,11 +2073,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "maximum": { # A message that can hold any of the supported value types. # Sets the field to the maximum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the given value. If a maximum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the larger operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The maximum of a zero stored value and zero input value is always the stored value. The maximum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -2048,11 +2093,7 @@ "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. }, "minimum": { # A message that can hold any of the supported value types. # Sets the field to the minimum of its current value and the given value. This must be an integer or a double value. If the field is not an integer or double, or if the field does not yet exist, the transformation will set the field to the input value. If a minimum operation is applied where the field and the input value are of mixed types (that is - one is an integer and one is a double) the field takes on the type of the smaller operand. If the operands are equivalent (e.g. 3 and 3.0), the field does not change. 0, 0.0, and -0.0 are all zero. The minimum of a zero stored value and zero input value is always the stored value. The minimum of any numeric value x and NaN is NaN. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value. @@ -2073,7 +2114,26 @@ }, "removeAllFromArray": { # An array value. # Remove all of the given elements from the array in the field. If the field is not an array, or if the field does not yet exist, it is set to the empty array. Equivalent numbers of the different types (e.g. 3L and 3.0) are considered equal when deciding whether an element should be removed. NaN is equal to NaN, and Null is equal to Null. This will remove all equivalent values if there are duplicates. The corresponding transform_result will be the null value. "values": [ # Values in the array. - # Object with schema name: Value + { # A message that can hold any of the supported value types. + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. + "booleanValue": True or False, # A boolean value. + "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. + "doubleValue": 3.14, # A double value. + "geoPointValue": { # An object that represents a latitude/longitude pair. This is expressed as a pair of doubles to represent degrees latitude and degrees longitude. Unless specified otherwise, this must conform to the WGS84 standard. Values must be within normalized ranges. # A geo point value representing a point on the surface of Earth. + "latitude": 3.14, # The latitude in degrees. It must be in the range [-90.0, +90.0]. + "longitude": 3.14, # The longitude in degrees. It must be in the range [-180.0, +180.0]. + }, + "integerValue": "A String", # An integer value. + "mapValue": { # A map value. # A map value. + "fields": { # The map's fields. The map keys represent field names. Field names matching the regular expression `__.*__` are reserved. Reserved field names are forbidden except in certain documented contexts. The map keys, represented as UTF-8, must not exceed 1,500 bytes and cannot be empty. + "a_key": # Object with schema name: Value + }, + }, + "nullValue": "A String", # A null value. + "referenceValue": "A String", # A reference to a document. For example: `projects/{project_id}/databases/{database_id}/documents/{document_path}`. + "stringValue": "A String", # A string value. The string, represented as UTF-8, must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes of the UTF-8 representation are considered by queries. + "timestampValue": "A String", # A timestamp value. Precise only to microseconds. When stored, any additional precision is rounded down. + }, ], }, "setToServerValue": "A String", # Sets the field to the given server value. @@ -2099,11 +2159,7 @@ { # The result of applying a write. "transformResults": [ # The results of applying each DocumentTransform.FieldTransform, in the same order. { # A message that can hold any of the supported value types. - "arrayValue": { # An array value. # An array value. Cannot directly contain another array value, though can contain an map which contains another array. - "values": [ # Values in the array. - # Object with schema name: Value - ], - }, + "arrayValue": # Object with schema name: ArrayValue # An array value. Cannot directly contain another array value, though can contain an map which contains another array. "booleanValue": True or False, # A boolean value. "bytesValue": "A String", # A bytes value. Must not exceed 1 MiB - 89 bytes. Only the first 1,500 bytes are considered by queries. "doubleValue": 3.14, # A double value.
diff --git a/docs/dyn/privateca_v1beta1.projects.locations.html b/docs/dyn/privateca_v1beta1.projects.locations.html index 92cbae1..3a813e5 100644 --- a/docs/dyn/privateca_v1beta1.projects.locations.html +++ b/docs/dyn/privateca_v1beta1.projects.locations.html
@@ -141,7 +141,7 @@ Args: name: string, The resource that owns the locations collection, if applicable. (required) filter: string, A filter to narrow down results to a preferred subset. The filtering language accepts strings like "displayName=tokyo", and is documented in more detail in [AIP-160](https://google.aip.dev/160). - pageSize: integer, The maximum number of results to return. If not set, the service selects a default. + pageSize: integer, The maximum number of results to return. If not set, the service will select a default. pageToken: string, A page token received from the `next_page_token` field in the response. Send that page token to receive the subsequent page. x__xgafv: string, V1 error format. Allowed values
diff --git a/docs/dyn/servicemanagement_v1.services.configs.html b/docs/dyn/servicemanagement_v1.services.configs.html index 0faacb2..7c9ef29 100644 --- a/docs/dyn/servicemanagement_v1.services.configs.html +++ b/docs/dyn/servicemanagement_v1.services.configs.html
@@ -266,9 +266,6 @@ }, "endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint with the same name as the service is automatically generated to service all defined APIs. { # `Endpoint` describes a network endpoint of a service that serves a set of APIs. It is commonly known as a service endpoint. A service may expose any number of service endpoints, and all service endpoints share the same service definition, such as quota limits and monitoring metrics. Example service configuration: name: library-example.googleapis.com endpoints: # Below entry makes 'google.example.library.v1.Library' # API be served from endpoint address library-example.googleapis.com. # It also allows HTTP OPTIONS calls to be passed to the backend, for # it to decide whether the subsequent cross-origin request is # allowed to proceed. - name: library-example.googleapis.com allow_cors: true - "aliases": [ # Unimplemented. Dot not use. DEPRECATED: This field is no longer supported. Instead of using aliases, please specify multiple google.api.Endpoint for each of the intended aliases. Additional names that this endpoint will be hosted on. - "A String", - ], "allowCors": True or False, # Allowing [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka cross-domain traffic, would allow the backends served from this endpoint to receive and respond to HTTP OPTIONS requests. The response will be used by the browser to determine whether the subsequent cross-origin request is allowed to proceed. "name": "A String", # The canonical name of this endpoint. "target": "A String", # The specification of an Internet routable address of API frontend that will handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary). It should be either a valid IPv4 address or a fully-qualified domain name. For example, "8.8.8.8" or "myservice.appspot.com". @@ -735,9 +732,6 @@ }, "endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint with the same name as the service is automatically generated to service all defined APIs. { # `Endpoint` describes a network endpoint of a service that serves a set of APIs. It is commonly known as a service endpoint. A service may expose any number of service endpoints, and all service endpoints share the same service definition, such as quota limits and monitoring metrics. Example service configuration: name: library-example.googleapis.com endpoints: # Below entry makes 'google.example.library.v1.Library' # API be served from endpoint address library-example.googleapis.com. # It also allows HTTP OPTIONS calls to be passed to the backend, for # it to decide whether the subsequent cross-origin request is # allowed to proceed. - name: library-example.googleapis.com allow_cors: true - "aliases": [ # Unimplemented. Dot not use. DEPRECATED: This field is no longer supported. Instead of using aliases, please specify multiple google.api.Endpoint for each of the intended aliases. Additional names that this endpoint will be hosted on. - "A String", - ], "allowCors": True or False, # Allowing [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka cross-domain traffic, would allow the backends served from this endpoint to receive and respond to HTTP OPTIONS requests. The response will be used by the browser to determine whether the subsequent cross-origin request is allowed to proceed. "name": "A String", # The canonical name of this endpoint. "target": "A String", # The specification of an Internet routable address of API frontend that will handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary). It should be either a valid IPv4 address or a fully-qualified domain name. For example, "8.8.8.8" or "myservice.appspot.com". @@ -1216,9 +1210,6 @@ }, "endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint with the same name as the service is automatically generated to service all defined APIs. { # `Endpoint` describes a network endpoint of a service that serves a set of APIs. It is commonly known as a service endpoint. A service may expose any number of service endpoints, and all service endpoints share the same service definition, such as quota limits and monitoring metrics. Example service configuration: name: library-example.googleapis.com endpoints: # Below entry makes 'google.example.library.v1.Library' # API be served from endpoint address library-example.googleapis.com. # It also allows HTTP OPTIONS calls to be passed to the backend, for # it to decide whether the subsequent cross-origin request is # allowed to proceed. - name: library-example.googleapis.com allow_cors: true - "aliases": [ # Unimplemented. Dot not use. DEPRECATED: This field is no longer supported. Instead of using aliases, please specify multiple google.api.Endpoint for each of the intended aliases. Additional names that this endpoint will be hosted on. - "A String", - ], "allowCors": True or False, # Allowing [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka cross-domain traffic, would allow the backends served from this endpoint to receive and respond to HTTP OPTIONS requests. The response will be used by the browser to determine whether the subsequent cross-origin request is allowed to proceed. "name": "A String", # The canonical name of this endpoint. "target": "A String", # The specification of an Internet routable address of API frontend that will handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary). It should be either a valid IPv4 address or a fully-qualified domain name. For example, "8.8.8.8" or "myservice.appspot.com". @@ -1697,9 +1688,6 @@ }, "endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint with the same name as the service is automatically generated to service all defined APIs. { # `Endpoint` describes a network endpoint of a service that serves a set of APIs. It is commonly known as a service endpoint. A service may expose any number of service endpoints, and all service endpoints share the same service definition, such as quota limits and monitoring metrics. Example service configuration: name: library-example.googleapis.com endpoints: # Below entry makes 'google.example.library.v1.Library' # API be served from endpoint address library-example.googleapis.com. # It also allows HTTP OPTIONS calls to be passed to the backend, for # it to decide whether the subsequent cross-origin request is # allowed to proceed. - name: library-example.googleapis.com allow_cors: true - "aliases": [ # Unimplemented. Dot not use. DEPRECATED: This field is no longer supported. Instead of using aliases, please specify multiple google.api.Endpoint for each of the intended aliases. Additional names that this endpoint will be hosted on. - "A String", - ], "allowCors": True or False, # Allowing [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka cross-domain traffic, would allow the backends served from this endpoint to receive and respond to HTTP OPTIONS requests. The response will be used by the browser to determine whether the subsequent cross-origin request is allowed to proceed. "name": "A String", # The canonical name of this endpoint. "target": "A String", # The specification of an Internet routable address of API frontend that will handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary). It should be either a valid IPv4 address or a fully-qualified domain name. For example, "8.8.8.8" or "myservice.appspot.com".
diff --git a/docs/dyn/servicemanagement_v1.services.html b/docs/dyn/servicemanagement_v1.services.html index 3cbd282..cdc71fd 100644 --- a/docs/dyn/servicemanagement_v1.services.html +++ b/docs/dyn/servicemanagement_v1.services.html
@@ -112,7 +112,7 @@ <p class="firstline">Gets the access control policy for a resource. Returns an empty policy if the resource exists and does not have a policy set.</p> <p class="toc_element"> <code><a href="#list">list(consumerId=None, pageSize=None, pageToken=None, producerProjectId=None, x__xgafv=None)</a></code></p> -<p class="firstline">Lists managed services. Returns all public services. For authenticated users, also returns all services the calling user has "servicemanagement.services.get" permission for.</p> +<p class="firstline">Lists managed services. Returns all public services. For authenticated users, also returns all services the calling user has "servicemanagement.services.get" permission for. **BETA:** If the caller specifies the `consumer_id`, it returns only the services enabled on the consumer. The `consumer_id` must have the format of "project:{PROJECT-ID}".</p> <p class="toc_element"> <code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p> <p class="firstline">Retrieves the next page of results.</p> @@ -461,9 +461,6 @@ }, "endpoints": [ # Configuration for network endpoints. If this is empty, then an endpoint with the same name as the service is automatically generated to service all defined APIs. { # `Endpoint` describes a network endpoint of a service that serves a set of APIs. It is commonly known as a service endpoint. A service may expose any number of service endpoints, and all service endpoints share the same service definition, such as quota limits and monitoring metrics. Example service configuration: name: library-example.googleapis.com endpoints: # Below entry makes 'google.example.library.v1.Library' # API be served from endpoint address library-example.googleapis.com. # It also allows HTTP OPTIONS calls to be passed to the backend, for # it to decide whether the subsequent cross-origin request is # allowed to proceed. - name: library-example.googleapis.com allow_cors: true - "aliases": [ # Unimplemented. Dot not use. DEPRECATED: This field is no longer supported. Instead of using aliases, please specify multiple google.api.Endpoint for each of the intended aliases. Additional names that this endpoint will be hosted on. - "A String", - ], "allowCors": True or False, # Allowing [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka cross-domain traffic, would allow the backends served from this endpoint to receive and respond to HTTP OPTIONS requests. The response will be used by the browser to determine whether the subsequent cross-origin request is allowed to proceed. "name": "A String", # The canonical name of this endpoint. "target": "A String", # The specification of an Internet routable address of API frontend that will handle requests to this [API Endpoint](https://cloud.google.com/apis/design/glossary). It should be either a valid IPv4 address or a fully-qualified domain name. For example, "8.8.8.8" or "myservice.appspot.com". @@ -822,7 +819,7 @@ <div class="method"> <code class="details" id="list">list(consumerId=None, pageSize=None, pageToken=None, producerProjectId=None, x__xgafv=None)</code> - <pre>Lists managed services. Returns all public services. For authenticated users, also returns all services the calling user has "servicemanagement.services.get" permission for. + <pre>Lists managed services. Returns all public services. For authenticated users, also returns all services the calling user has "servicemanagement.services.get" permission for. **BETA:** If the caller specifies the `consumer_id`, it returns only the services enabled on the consumer. The `consumer_id` must have the format of "project:{PROJECT-ID}". Args: consumerId: string, Include services consumed by the specified consumer. The Google Service Management implementation accepts the following forms: - project:
diff --git a/docs/dyn/spanner_v1.projects.instances.databases.sessions.html b/docs/dyn/spanner_v1.projects.instances.databases.sessions.html index 936dae8..5a34d9d 100644 --- a/docs/dyn/spanner_v1.projects.instances.databases.sessions.html +++ b/docs/dyn/spanner_v1.projects.instances.databases.sessions.html
@@ -421,7 +421,14 @@ "a_key": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "structType": { # `StructType` defines the fields of a STRUCT type. # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. + { # Message representing a single field of a struct. + "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. + "type": # Object with schema name: Type # The type of the field. + }, + ], + }, }, }, "params": { # Parameter names and values that bind to placeholders in the DML string. A parameter placeholder consists of the `@` character followed by the parameter name (for example, `@firstName`). Parameter names can contain letters, numbers, and underscores. Parameters can appear anywhere that a literal value is expected. The same parameter name can be used more than once, for example: `"WHERE id > @msg_id AND id < @msg_id + 100"` It is an error to execute a SQL statement with unbound parameters. @@ -479,11 +486,7 @@ "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. { # Message representing a single field of a struct. "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. - "type": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. # The type of the field. - "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. - "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. - }, + "type": # Object with schema name: Type # The type of the field. }, ], }, @@ -560,7 +563,14 @@ "a_key": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "structType": { # `StructType` defines the fields of a STRUCT type. # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. + { # Message representing a single field of a struct. + "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. + "type": # Object with schema name: Type # The type of the field. + }, + ], + }, }, }, "params": { # Parameter names and values that bind to placeholders in the SQL string. A parameter placeholder consists of the `@` character followed by the parameter name (for example, `@firstName`). Parameter names must conform to the naming requirements of identifiers as specified at https://cloud.google.com/spanner/docs/lexical#identifiers. Parameters can appear anywhere that a literal value is expected. The same parameter name can be used more than once, for example: `"WHERE id > @msg_id AND id < @msg_id + 100"` It is an error to execute a SQL statement with unbound parameters. @@ -627,11 +637,7 @@ "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. { # Message representing a single field of a struct. "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. - "type": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. # The type of the field. - "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. - "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. - }, + "type": # Object with schema name: Type # The type of the field. }, ], }, @@ -697,7 +703,14 @@ "a_key": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "structType": { # `StructType` defines the fields of a STRUCT type. # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. + { # Message representing a single field of a struct. + "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. + "type": # Object with schema name: Type # The type of the field. + }, + ], + }, }, }, "params": { # Parameter names and values that bind to placeholders in the SQL string. A parameter placeholder consists of the `@` character followed by the parameter name (for example, `@firstName`). Parameter names must conform to the naming requirements of identifiers as specified at https://cloud.google.com/spanner/docs/lexical#identifiers. Parameters can appear anywhere that a literal value is expected. The same parameter name can be used more than once, for example: `"WHERE id > @msg_id AND id < @msg_id + 100"` It is an error to execute a SQL statement with unbound parameters. @@ -765,11 +778,7 @@ "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. { # Message representing a single field of a struct. "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. - "type": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. # The type of the field. - "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. - "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. - }, + "type": # Object with schema name: Type # The type of the field. }, ], }, @@ -904,7 +913,14 @@ "a_key": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "structType": { # `StructType` defines the fields of a STRUCT type. # If code == STRUCT, then `struct_type` provides type information for the struct's fields. + "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. + { # Message representing a single field of a struct. + "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. + "type": # Object with schema name: Type # The type of the field. + }, + ], + }, }, }, "params": { # Parameter names and values that bind to placeholders in the SQL string. A parameter placeholder consists of the `@` character followed by the parameter name (for example, `@firstName`). Parameter names can contain letters, numbers, and underscores. Parameters can appear anywhere that a literal value is expected. The same parameter name can be used more than once, for example: `"WHERE id > @msg_id AND id < @msg_id + 100"` It is an error to execute a SQL statement with unbound parameters. @@ -1160,11 +1176,7 @@ "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. { # Message representing a single field of a struct. "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. - "type": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. # The type of the field. - "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. - "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. - }, + "type": # Object with schema name: Type # The type of the field. }, ], }, @@ -1336,11 +1348,7 @@ "fields": [ # The list of fields that make up this struct. Order is significant, because values of this struct type are represented as lists, where the order of field values matches the order of fields in the StructType. In turn, the order of fields matches the order of columns in a read request, or the order of fields in the `SELECT` clause of a query. { # Message representing a single field of a struct. "name": "A String", # The name of the field. For reads, this is the column name. For SQL queries, it is the column alias (e.g., `"Word"` in the query `"SELECT 'hello' AS Word"`), or the column name (e.g., `"ColName"` in the query `"SELECT ColName FROM Table"`). Some columns might have an empty name (e.g., `"SELECT UPPER(ColName)"`). Note that a query result can contain multiple fields with the same name. - "type": { # `Type` indicates the type of a Cloud Spanner value, as might be stored in a table cell or returned from an SQL query. # The type of the field. - "arrayElementType": # Object with schema name: Type # If code == ARRAY, then `array_element_type` is the type of the array elements. - "code": "A String", # Required. The TypeCode for this type. - "structType": # Object with schema name: StructType # If code == STRUCT, then `struct_type` provides type information for the struct's fields. - }, + "type": # Object with schema name: Type # The type of the field. }, ], },