blob: ab59f0c096a547d273be63d81c6a5e792c1e4b05 [file] [log] [blame]
// Copyright 2011 Google Inc. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef NINJA_BUILD_H_
#define NINJA_BUILD_H_
#include <cstdio>
#include <map>
#include <memory>
#include <queue>
#include <set>
#include <string>
#include <vector>
#include "depfile_parser.h"
#include "graph.h" // XXX needed for DependencyScan; should rearrange.
#include "exit_status.h"
#include "line_printer.h"
#include "metrics.h"
#include "util.h" // int64_t
struct BuildLog;
struct BuildStatus;
struct Builder;
struct DiskInterface;
struct Edge;
struct Node;
struct State;
/// Plan stores the state of a build plan: what we intend to build,
/// which steps we're ready to execute.
struct Plan {
Plan(Builder* builder = NULL);
/// Add a target to our plan (including all its dependencies).
/// Returns false if we don't need to build this target; may
/// fill in |err| with an error message if there's a problem.
bool AddTarget(Node* node, string* err);
// Pop a ready edge off the queue of edges to build.
// Returns NULL if there's no work to do.
Edge* FindWork();
/// Returns true if there's more work to be done.
bool more_to_do() const { return wanted_edges_ > 0 && command_edges_ > 0; }
/// Dumps the current state of the plan.
void Dump();
enum EdgeResult {
kEdgeFailed,
kEdgeSucceeded
};
/// Mark an edge as done building (whether it succeeded or failed).
/// If any of the edge's outputs are dyndep bindings of their dependents,
/// this loads dynamic dependencies from the nodes' paths.
/// Returns 'false' if loading dyndep info fails and 'true' otherwise.
bool EdgeFinished(Edge* edge, EdgeResult result, string* err);
/// Clean the given node during the build.
/// Return false on error.
bool CleanNode(DependencyScan* scan, Node* node, string* err);
/// Number of edges with commands to run.
int command_edge_count() const { return command_edges_; }
/// Reset state. Clears want and ready sets.
void Reset();
/// Update the build plan to account for modifications made to the graph
/// by information loaded from a dyndep file.
bool DyndepsLoaded(DependencyScan* scan, Node* node,
const DyndepFile& ddf, string* err);
private:
bool RefreshDyndepDependents(DependencyScan* scan, Node* node, string* err);
void UnmarkDependents(Node* node, set<Node*>* dependents);
bool AddSubTarget(Node* node, Node* dependent, string* err,
set<Edge*>* dyndep_walk);
/// Update plan with knowledge that the given node is up to date.
/// If the node is a dyndep binding on any of its dependents, this
/// loads dynamic dependencies from the node's path.
/// Returns 'false' if loading dyndep info fails and 'true' otherwise.
bool NodeFinished(Node* node, string* err);
/// Enumerate possible steps we want for an edge.
enum Want
{
/// We do not want to build the edge, but we might want to build one of
/// its dependents.
kWantNothing,
/// We want to build the edge, but have not yet scheduled it.
kWantToStart,
/// We want to build the edge, have scheduled it, and are waiting
/// for it to complete.
kWantToFinish
};
void EdgeWanted(Edge* edge);
bool EdgeMaybeReady(map<Edge*, Want>::iterator want_e, string* err);
/// Submits a ready edge as a candidate for execution.
/// The edge may be delayed from running, for example if it's a member of a
/// currently-full pool.
void ScheduleWork(map<Edge*, Want>::iterator want_e);
/// Keep track of which edges we want to build in this plan. If this map does
/// not contain an entry for an edge, we do not want to build the entry or its
/// dependents. If it does contain an entry, the enumeration indicates what
/// we want for the edge.
map<Edge*, Want> want_;
set<Edge*> ready_;
Builder* builder_;
/// Total number of edges that have commands (not phony).
int command_edges_;
/// Total remaining number of wanted edges.
int wanted_edges_;
};
/// CommandRunner is an interface that wraps running the build
/// subcommands. This allows tests to abstract out running commands.
/// RealCommandRunner is an implementation that actually runs commands.
struct CommandRunner {
virtual ~CommandRunner() {}
virtual bool CanRunMore() = 0;
virtual bool StartCommand(Edge* edge) = 0;
/// The result of waiting for a command.
struct Result {
Result() : edge(NULL) {}
Edge* edge;
ExitStatus status;
string output;
bool success() const { return status == ExitSuccess; }
};
/// Wait for a command to complete, or return false if interrupted.
virtual bool WaitForCommand(Result* result) = 0;
virtual vector<Edge*> GetActiveEdges() { return vector<Edge*>(); }
virtual void Abort() {}
};
/// Options (e.g. verbosity, parallelism) passed to a build.
struct BuildConfig {
BuildConfig() : verbosity(NORMAL), dry_run(false), parallelism(1),
failures_allowed(1), max_load_average(-0.0f) {}
enum Verbosity {
NORMAL,
QUIET, // No output -- used when testing.
VERBOSE
};
Verbosity verbosity;
bool dry_run;
int parallelism;
int failures_allowed;
/// The maximum load average we must not exceed. A negative value
/// means that we do not have any limit.
double max_load_average;
DepfileParserOptions depfile_parser_options;
};
/// Builder wraps the build process: starting commands, updating status.
struct Builder {
Builder(State* state, const BuildConfig& config,
BuildLog* build_log, DepsLog* deps_log,
DiskInterface* disk_interface);
~Builder();
/// Clean up after interrupted commands by deleting output files.
void Cleanup();
Node* AddTarget(const string& name, string* err);
/// Add a target to the build, scanning dependencies.
/// @return false on error.
bool AddTarget(Node* target, string* err);
/// Returns true if the build targets are already up to date.
bool AlreadyUpToDate() const;
/// Run the build. Returns false on error.
/// It is an error to call this function when AlreadyUpToDate() is true.
bool Build(string* err);
bool StartEdge(Edge* edge, string* err);
/// Update status ninja logs following a command termination.
/// @return false if the build can not proceed further due to a fatal error.
bool FinishCommand(CommandRunner::Result* result, string* err);
/// Used for tests.
void SetBuildLog(BuildLog* log) {
scan_.set_build_log(log);
}
/// Load the dyndep information provided by the given node.
bool LoadDyndeps(Node* node, string* err);
State* state_;
const BuildConfig& config_;
Plan plan_;
#if __cplusplus < 201703L
auto_ptr<CommandRunner> command_runner_;
#else
unique_ptr<CommandRunner> command_runner_; // auto_ptr was removed in C++17.
#endif
BuildStatus* status_;
private:
bool ExtractDeps(CommandRunner::Result* result, const string& deps_type,
const string& deps_prefix, vector<Node*>* deps_nodes,
string* err);
DiskInterface* disk_interface_;
DependencyScan scan_;
// Unimplemented copy ctor and operator= ensure we don't copy the auto_ptr.
Builder(const Builder &other); // DO NOT IMPLEMENT
void operator=(const Builder &other); // DO NOT IMPLEMENT
};
/// Tracks the status of a build: completion fraction, printing updates.
struct BuildStatus {
explicit BuildStatus(const BuildConfig& config);
void PlanHasTotalEdges(int total);
void BuildEdgeStarted(Edge* edge);
void BuildEdgeFinished(Edge* edge, bool success, const string& output,
int* start_time, int* end_time);
void BuildLoadDyndeps();
void BuildStarted();
void BuildFinished();
enum EdgeStatus {
kEdgeStarted,
kEdgeFinished,
};
/// Format the progress status string by replacing the placeholders.
/// See the user manual for more information about the available
/// placeholders.
/// @param progress_status_format The format of the progress status.
/// @param status The status of the edge.
string FormatProgressStatus(const char* progress_status_format,
EdgeStatus status) const;
private:
void PrintStatus(Edge* edge, EdgeStatus status);
const BuildConfig& config_;
/// Time the build started.
int64_t start_time_millis_;
int started_edges_, finished_edges_, total_edges_;
/// Map of running edge to time the edge started running.
typedef map<Edge*, int> RunningEdgeMap;
RunningEdgeMap running_edges_;
/// Prints progress output.
LinePrinter printer_;
/// The custom progress status format to use.
const char* progress_status_format_;
template<size_t S>
void SnprintfRate(double rate, char(&buf)[S], const char* format) const {
if (rate == -1)
snprintf(buf, S, "?");
else
snprintf(buf, S, format, rate);
}
struct RateInfo {
RateInfo() : rate_(-1) {}
void Restart() { stopwatch_.Restart(); }
double Elapsed() const { return stopwatch_.Elapsed(); }
double rate() { return rate_; }
void UpdateRate(int edges) {
if (edges && stopwatch_.Elapsed())
rate_ = edges / stopwatch_.Elapsed();
}
private:
double rate_;
Stopwatch stopwatch_;
};
struct SlidingRateInfo {
SlidingRateInfo(int n) : rate_(-1), N(n), last_update_(-1) {}
void Restart() { stopwatch_.Restart(); }
double rate() { return rate_; }
void UpdateRate(int update_hint) {
if (update_hint == last_update_)
return;
last_update_ = update_hint;
if (times_.size() == N)
times_.pop();
times_.push(stopwatch_.Elapsed());
if (times_.back() != times_.front())
rate_ = times_.size() / (times_.back() - times_.front());
}
private:
double rate_;
Stopwatch stopwatch_;
const size_t N;
queue<double> times_;
int last_update_;
};
mutable RateInfo overall_rate_;
mutable SlidingRateInfo current_rate_;
};
#endif // NINJA_BUILD_H_