script/test

#!/bin/bash
#
#  Copyright (c) 2017, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#
#   Description:
#       This script runs border router tests.
#

# shellcheck source=script/_initrc
. "$(dirname "$0")"/_initrc

readonly OTBR_VERBOSE=${OTBR_VERBOSE:-0}

OTBR_COLOR_PASS='\033[0;32m'
readonly OTBR_COLOR_PASS

OTBR_COLOR_FAIL='\033[0;31m'
readonly OTBR_COLOR_FAIL

OTBR_COLOR_NONE='\033[0m'
readonly OTBR_COLOR_NONE

QUIET=${QUIET:-1}
readonly QUIET

OTBR_BUILD_TYPE="${OTBR_BUILD_TYPE:-Debug}"
readonly OTBR_BUILD_TYPE

OTBR_COVERAGE="${OTBR_COVERAGE:-0}"
readonly OTBR_COVERAGE

OTBR_MDNS="${OTBR_MDNS-}"
readonly OTBR_MDNS

OTBR_REST="${OTBR_REST-}"
readonly OTBR_REST

OTBR_OPTIONS="${OTBR_OPTIONS-}"
readonly OTBR_OPTIONS

OTBR_TOP_BUILDDIR="${OTBR_TOP_BUILDDIR:-${BUILD_DIR}/otbr}"
readonly OTBR_TOP_BUILDDIR

#######################################
# Run test and print result.
# Globals:
#   OTBR_COLOR_PASS
#   OTBR_COLOR_FAIL
#   OTBR_COLOR_NONE
# Arguments:
#   $@  - Test command
# Returns:
#   0           - Test passed.
#   Otherwise   - Test failed!
#######################################
print_result()
{
    local exit_code=0

    echo -e "$(date) Running $*"

    if [[ ${OTBR_VERBOSE} == 0 ]]; then
        "$@" &>test.log || exit_code=$?
    else
        "$@" || exit_code=$?
    fi

    if [[ $exit_code == 0 ]]; then
        prefix="${OTBR_COLOR_PASS}PASS${OTBR_COLOR_NONE}"
    else
        prefix="${OTBR_COLOR_FAIL}FAIL${OTBR_COLOR_NONE}"
    fi

    echo -e "${prefix} $*"

    # only output log on failure
    if [[ ${OTBR_VERBOSE} == 0 && ${exit_code} != 0 ]]; then
        cat test.log
    fi

    return ${exit_code}
}

print_usage()
{
    cat <<EOF
USAGE: $0 COMMAND

COMMAND:
    build       Build project for running tests. This can be used to rebuild the project for changes.
    clean       Clean built files to prepare new build.
    meshcop     Run MeshCoP tests.
    openwrt     Run OpenWRT tests.
    help        Print this help.

EXAMPLES:
    $0 clean build
EOF
    exit "$1"
}

do_build()
{
    otbr_options=(
        "-DCMAKE_BUILD_TYPE=${OTBR_BUILD_TYPE}"
        "-DCMAKE_INSTALL_PREFIX=/usr"
        "-DOT_THREAD_VERSION=1.4"
        "-DOTBR_DBUS=ON"
        "-DOTBR_FEATURE_FLAGS=ON"
        "-DOTBR_TELEMETRY_DATA_API=ON"
        "-DOTBR_WEB=ON"
        "-DOTBR_UNSECURE_JOIN=ON"
        "-DOTBR_LINK_METRICS_TELEMETRY=ON"
        "-DOTBR_VENDOR_NAME=OpenThreadTest"
        "-DOTBR_PRODUCT_NAME=BorderRouter"
        ${otbr_options[@]+"${otbr_options[@]}"}
    )

    ./script/cmake-build "${otbr_options[@]}"
}

do_clean()
{
    echo "Removing ${BUILD_DIR} (requiring sudo)"
    rm -rf "${BUILD_DIR}" || sudo rm -rf "${BUILD_DIR}"
}

do_check()
{
    (cd "${OTBR_TOP_BUILDDIR}" \
        && ninja && sudo ninja install \
        && CTEST_OUTPUT_ON_FAILURE=1 ctest -LE sudo \
        && CTEST_OUTPUT_ON_FAILURE=1 sudo ctest -L sudo) # Seperate running tests for sudo and non-sudo cases.
}

do_doxygen()
{
    otbr_options=(
        "-DOTBR_DOC=ON"
    )

    OTBR_TARGET="doxygen" ./script/cmake-build "${otbr_options[@]}"
}

do_prepare()
{
    if [[ ${OTBR_OPTIONS} ]]; then
        read -r -a otbr_options <<<"${OTBR_OPTIONS}"
    else
        otbr_options=()
    fi

    if [[ -n ${OTBR_MDNS} ]]; then
        otbr_options+=("-DOTBR_MDNS=${OTBR_MDNS}")
    fi

    if [[ ${OTBR_COVERAGE} == 1 ]]; then
        otbr_options+=("-DOTBR_COVERAGE=ON")
    fi

    if [[ ${OTBR_REST} == "rest-off" ]]; then
        otbr_options+=("-DOTBR_REST=OFF")
    else
        otbr_options+=("-DOTBR_REST=ON")
    fi
}

do_package()
{
    otbr_options=(
        "-DBUILD_TESTING=OFF"
        "-DCMAKE_INSTALL_PREFIX=/usr"
        "-DCMAKE_BUILD_TYPE=Release"
        "-DOTBR_WEB=ON"
        "-DOTBR_VENDOR_NAME=OpenThreadTest"
        "-DOTBR_PRODUCT_NAME=BorderRouter"
        ${otbr_options[@]+"${otbr_options[@]}"}
    )

    OTBR_TARGET="package" ./script/cmake-build "${otbr_options[@]}"
}

do_simulation()
{
    export top_builddir="${OTBR_TOP_BUILDDIR}"

    print_result tests/scripts/auto-attach
    print_result tests/scripts/infra-link-selector
}

main()
{
    if [[ $# == 0 ]]; then
        print_usage 1
    fi

    do_prepare

    while [[ $# != 0 ]]; do
        case "$1" in
            build)
                do_build
                ;;
            check)
                do_check
                ;;
            clean)
                do_clean
                ;;
            doxygen)
                do_doxygen
                ;;
            help)
                print_usage 1
                ;;
            meshcop)
                top_builddir="${OTBR_TOP_BUILDDIR}" print_result ./tests/scripts/meshcop
                ;;
            openwrt)
                print_result ./tests/scripts/openwrt
                ;;
            simulation)
                do_simulation
                ;;
            package)
                do_package
                ;;
            *)
                echo "Unknown test: ${1}"
                print_usage 1
                ;;
        esac
        shift
    done
}

main "$@"