| /* | |
| ** 2008 August 05 | |
| ** | |
| ** The author disclaims copyright to this source code. In place of | |
| ** a legal notice, here is a blessing: | |
| ** | |
| ** May you do good and not evil. | |
| ** May you find forgiveness for yourself and forgive others. | |
| ** May you share freely, never taking more than you give. | |
| ** | |
| ************************************************************************* | |
| ** This file implements that page cache. | |
| */ | |
| #include "sqliteInt.h" | |
| /* | |
| ** A complete page cache is an instance of this structure. Every | |
| ** entry in the cache holds a single page of the database file. The | |
| ** btree layer only operates on the cached copy of the database pages. | |
| ** | |
| ** A page cache entry is "clean" if it exactly matches what is currently | |
| ** on disk. A page is "dirty" if it has been modified and needs to be | |
| ** persisted to disk. | |
| ** | |
| ** pDirty, pDirtyTail, pSynced: | |
| ** All dirty pages are linked into the doubly linked list using | |
| ** PgHdr.pDirtyNext and pDirtyPrev. The list is maintained in LRU order | |
| ** such that p was added to the list more recently than p->pDirtyNext. | |
| ** PCache.pDirty points to the first (newest) element in the list and | |
| ** pDirtyTail to the last (oldest). | |
| ** | |
| ** The PCache.pSynced variable is used to optimize searching for a dirty | |
| ** page to eject from the cache mid-transaction. It is better to eject | |
| ** a page that does not require a journal sync than one that does. | |
| ** Therefore, pSynced is maintained to that it *almost* always points | |
| ** to either the oldest page in the pDirty/pDirtyTail list that has a | |
| ** clear PGHDR_NEED_SYNC flag or to a page that is older than this one | |
| ** (so that the right page to eject can be found by following pDirtyPrev | |
| ** pointers). | |
| */ | |
| struct PCache { | |
| PgHdr *pDirty, *pDirtyTail; /* List of dirty pages in LRU order */ | |
| PgHdr *pSynced; /* Last synced page in dirty page list */ | |
| int nRefSum; /* Sum of ref counts over all pages */ | |
| int szCache; /* Configured cache size */ | |
| int szSpill; /* Size before spilling occurs */ | |
| int szPage; /* Size of every page in this cache */ | |
| int szExtra; /* Size of extra space for each page */ | |
| u8 bPurgeable; /* True if pages are on backing store */ | |
| u8 eCreate; /* eCreate value for for xFetch() */ | |
| int (*xStress)(void*,PgHdr*); /* Call to try make a page clean */ | |
| void *pStress; /* Argument to xStress */ | |
| sqlite3_pcache *pCache; /* Pluggable cache module */ | |
| }; | |
| /********************************** Test and Debug Logic **********************/ | |
| /* | |
| ** Debug tracing macros. Enable by by changing the "0" to "1" and | |
| ** recompiling. | |
| ** | |
| ** When sqlite3PcacheTrace is 1, single line trace messages are issued. | |
| ** When sqlite3PcacheTrace is 2, a dump of the pcache showing all cache entries | |
| ** is displayed for many operations, resulting in a lot of output. | |
| */ | |
| #if defined(SQLITE_DEBUG) && 0 | |
| int sqlite3PcacheTrace = 2; /* 0: off 1: simple 2: cache dumps */ | |
| int sqlite3PcacheMxDump = 9999; /* Max cache entries for pcacheDump() */ | |
| # define pcacheTrace(X) if(sqlite3PcacheTrace){sqlite3DebugPrintf X;} | |
| void pcacheDump(PCache *pCache){ | |
| int N; | |
| int i, j; | |
| sqlite3_pcache_page *pLower; | |
| PgHdr *pPg; | |
| unsigned char *a; | |
| if( sqlite3PcacheTrace<2 ) return; | |
| if( pCache->pCache==0 ) return; | |
| N = sqlite3PcachePagecount(pCache); | |
| if( N>sqlite3PcacheMxDump ) N = sqlite3PcacheMxDump; | |
| for(i=1; i<=N; i++){ | |
| pLower = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, i, 0); | |
| if( pLower==0 ) continue; | |
| pPg = (PgHdr*)pLower->pExtra; | |
| printf("%3d: nRef %2d flgs %02x data ", i, pPg->nRef, pPg->flags); | |
| a = (unsigned char *)pLower->pBuf; | |
| for(j=0; j<12; j++) printf("%02x", a[j]); | |
| printf("\n"); | |
| if( pPg->pPage==0 ){ | |
| sqlite3GlobalConfig.pcache2.xUnpin(pCache->pCache, pLower, 0); | |
| } | |
| } | |
| } | |
| #else | |
| # define pcacheTrace(X) | |
| # define pcacheDump(X) | |
| #endif | |
| /* | |
| ** Check invariants on a PgHdr entry. Return true if everything is OK. | |
| ** Return false if any invariant is violated. | |
| ** | |
| ** This routine is for use inside of assert() statements only. For | |
| ** example: | |
| ** | |
| ** assert( sqlite3PcachePageSanity(pPg) ); | |
| */ | |
| #ifdef SQLITE_DEBUG | |
| int sqlite3PcachePageSanity(PgHdr *pPg){ | |
| PCache *pCache; | |
| assert( pPg!=0 ); | |
| assert( pPg->pgno>0 || pPg->pPager==0 ); /* Page number is 1 or more */ | |
| pCache = pPg->pCache; | |
| assert( pCache!=0 ); /* Every page has an associated PCache */ | |
| if( pPg->flags & PGHDR_CLEAN ){ | |
| assert( (pPg->flags & PGHDR_DIRTY)==0 );/* Cannot be both CLEAN and DIRTY */ | |
| assert( pCache->pDirty!=pPg ); /* CLEAN pages not on dirty list */ | |
| assert( pCache->pDirtyTail!=pPg ); | |
| } | |
| /* WRITEABLE pages must also be DIRTY */ | |
| if( pPg->flags & PGHDR_WRITEABLE ){ | |
| assert( pPg->flags & PGHDR_DIRTY ); /* WRITEABLE implies DIRTY */ | |
| } | |
| /* NEED_SYNC can be set independently of WRITEABLE. This can happen, | |
| ** for example, when using the sqlite3PagerDontWrite() optimization: | |
| ** (1) Page X is journalled, and gets WRITEABLE and NEED_SEEK. | |
| ** (2) Page X moved to freelist, WRITEABLE is cleared | |
| ** (3) Page X reused, WRITEABLE is set again | |
| ** If NEED_SYNC had been cleared in step 2, then it would not be reset | |
| ** in step 3, and page might be written into the database without first | |
| ** syncing the rollback journal, which might cause corruption on a power | |
| ** loss. | |
| ** | |
| ** Another example is when the database page size is smaller than the | |
| ** disk sector size. When any page of a sector is journalled, all pages | |
| ** in that sector are marked NEED_SYNC even if they are still CLEAN, just | |
| ** in case they are later modified, since all pages in the same sector | |
| ** must be journalled and synced before any of those pages can be safely | |
| ** written. | |
| */ | |
| return 1; | |
| } | |
| #endif /* SQLITE_DEBUG */ | |
| /********************************** Linked List Management ********************/ | |
| /* Allowed values for second argument to pcacheManageDirtyList() */ | |
| #define PCACHE_DIRTYLIST_REMOVE 1 /* Remove pPage from dirty list */ | |
| #define PCACHE_DIRTYLIST_ADD 2 /* Add pPage to the dirty list */ | |
| #define PCACHE_DIRTYLIST_FRONT 3 /* Move pPage to the front of the list */ | |
| /* | |
| ** Manage pPage's participation on the dirty list. Bits of the addRemove | |
| ** argument determines what operation to do. The 0x01 bit means first | |
| ** remove pPage from the dirty list. The 0x02 means add pPage back to | |
| ** the dirty list. Doing both moves pPage to the front of the dirty list. | |
| */ | |
| static void pcacheManageDirtyList(PgHdr *pPage, u8 addRemove){ | |
| PCache *p = pPage->pCache; | |
| pcacheTrace(("%p.DIRTYLIST.%s %d\n", p, | |
| addRemove==1 ? "REMOVE" : addRemove==2 ? "ADD" : "FRONT", | |
| pPage->pgno)); | |
| if( addRemove & PCACHE_DIRTYLIST_REMOVE ){ | |
| assert( pPage->pDirtyNext || pPage==p->pDirtyTail ); | |
| assert( pPage->pDirtyPrev || pPage==p->pDirty ); | |
| /* Update the PCache1.pSynced variable if necessary. */ | |
| if( p->pSynced==pPage ){ | |
| p->pSynced = pPage->pDirtyPrev; | |
| } | |
| if( pPage->pDirtyNext ){ | |
| pPage->pDirtyNext->pDirtyPrev = pPage->pDirtyPrev; | |
| }else{ | |
| assert( pPage==p->pDirtyTail ); | |
| p->pDirtyTail = pPage->pDirtyPrev; | |
| } | |
| if( pPage->pDirtyPrev ){ | |
| pPage->pDirtyPrev->pDirtyNext = pPage->pDirtyNext; | |
| }else{ | |
| /* If there are now no dirty pages in the cache, set eCreate to 2. | |
| ** This is an optimization that allows sqlite3PcacheFetch() to skip | |
| ** searching for a dirty page to eject from the cache when it might | |
| ** otherwise have to. */ | |
| assert( pPage==p->pDirty ); | |
| p->pDirty = pPage->pDirtyNext; | |
| assert( p->bPurgeable || p->eCreate==2 ); | |
| if( p->pDirty==0 ){ /*OPTIMIZATION-IF-TRUE*/ | |
| assert( p->bPurgeable==0 || p->eCreate==1 ); | |
| p->eCreate = 2; | |
| } | |
| } | |
| } | |
| if( addRemove & PCACHE_DIRTYLIST_ADD ){ | |
| pPage->pDirtyPrev = 0; | |
| pPage->pDirtyNext = p->pDirty; | |
| if( pPage->pDirtyNext ){ | |
| assert( pPage->pDirtyNext->pDirtyPrev==0 ); | |
| pPage->pDirtyNext->pDirtyPrev = pPage; | |
| }else{ | |
| p->pDirtyTail = pPage; | |
| if( p->bPurgeable ){ | |
| assert( p->eCreate==2 ); | |
| p->eCreate = 1; | |
| } | |
| } | |
| p->pDirty = pPage; | |
| /* If pSynced is NULL and this page has a clear NEED_SYNC flag, set | |
| ** pSynced to point to it. Checking the NEED_SYNC flag is an | |
| ** optimization, as if pSynced points to a page with the NEED_SYNC | |
| ** flag set sqlite3PcacheFetchStress() searches through all newer | |
| ** entries of the dirty-list for a page with NEED_SYNC clear anyway. */ | |
| if( !p->pSynced | |
| && 0==(pPage->flags&PGHDR_NEED_SYNC) /*OPTIMIZATION-IF-FALSE*/ | |
| ){ | |
| p->pSynced = pPage; | |
| } | |
| } | |
| pcacheDump(p); | |
| } | |
| /* | |
| ** Wrapper around the pluggable caches xUnpin method. If the cache is | |
| ** being used for an in-memory database, this function is a no-op. | |
| */ | |
| static void pcacheUnpin(PgHdr *p){ | |
| if( p->pCache->bPurgeable ){ | |
| pcacheTrace(("%p.UNPIN %d\n", p->pCache, p->pgno)); | |
| sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 0); | |
| pcacheDump(p->pCache); | |
| } | |
| } | |
| /* | |
| ** Compute the number of pages of cache requested. p->szCache is the | |
| ** cache size requested by the "PRAGMA cache_size" statement. | |
| */ | |
| static int numberOfCachePages(PCache *p){ | |
| if( p->szCache>=0 ){ | |
| /* IMPLEMENTATION-OF: R-42059-47211 If the argument N is positive then the | |
| ** suggested cache size is set to N. */ | |
| return p->szCache; | |
| }else{ | |
| /* IMPLEMENTATION-OF: R-61436-13639 If the argument N is negative, then | |
| ** the number of cache pages is adjusted to use approximately abs(N*1024) | |
| ** bytes of memory. */ | |
| return (int)((-1024*(i64)p->szCache)/(p->szPage+p->szExtra)); | |
| } | |
| } | |
| /*************************************************** General Interfaces ****** | |
| ** | |
| ** Initialize and shutdown the page cache subsystem. Neither of these | |
| ** functions are threadsafe. | |
| */ | |
| int sqlite3PcacheInitialize(void){ | |
| if( sqlite3GlobalConfig.pcache2.xInit==0 ){ | |
| /* IMPLEMENTATION-OF: R-26801-64137 If the xInit() method is NULL, then the | |
| ** built-in default page cache is used instead of the application defined | |
| ** page cache. */ | |
| sqlite3PCacheSetDefault(); | |
| } | |
| return sqlite3GlobalConfig.pcache2.xInit(sqlite3GlobalConfig.pcache2.pArg); | |
| } | |
| void sqlite3PcacheShutdown(void){ | |
| if( sqlite3GlobalConfig.pcache2.xShutdown ){ | |
| /* IMPLEMENTATION-OF: R-26000-56589 The xShutdown() method may be NULL. */ | |
| sqlite3GlobalConfig.pcache2.xShutdown(sqlite3GlobalConfig.pcache2.pArg); | |
| } | |
| } | |
| /* | |
| ** Return the size in bytes of a PCache object. | |
| */ | |
| int sqlite3PcacheSize(void){ return sizeof(PCache); } | |
| /* | |
| ** Create a new PCache object. Storage space to hold the object | |
| ** has already been allocated and is passed in as the p pointer. | |
| ** The caller discovers how much space needs to be allocated by | |
| ** calling sqlite3PcacheSize(). | |
| ** | |
| ** szExtra is some extra space allocated for each page. The first | |
| ** 8 bytes of the extra space will be zeroed as the page is allocated, | |
| ** but remaining content will be uninitialized. Though it is opaque | |
| ** to this module, the extra space really ends up being the MemPage | |
| ** structure in the pager. | |
| */ | |
| int sqlite3PcacheOpen( | |
| int szPage, /* Size of every page */ | |
| int szExtra, /* Extra space associated with each page */ | |
| int bPurgeable, /* True if pages are on backing store */ | |
| int (*xStress)(void*,PgHdr*),/* Call to try to make pages clean */ | |
| void *pStress, /* Argument to xStress */ | |
| PCache *p /* Preallocated space for the PCache */ | |
| ){ | |
| memset(p, 0, sizeof(PCache)); | |
| p->szPage = 1; | |
| p->szExtra = szExtra; | |
| assert( szExtra>=8 ); /* First 8 bytes will be zeroed */ | |
| p->bPurgeable = bPurgeable; | |
| p->eCreate = 2; | |
| p->xStress = xStress; | |
| p->pStress = pStress; | |
| p->szCache = 100; | |
| p->szSpill = 1; | |
| pcacheTrace(("%p.OPEN szPage %d bPurgeable %d\n",p,szPage,bPurgeable)); | |
| return sqlite3PcacheSetPageSize(p, szPage); | |
| } | |
| /* | |
| ** Change the page size for PCache object. The caller must ensure that there | |
| ** are no outstanding page references when this function is called. | |
| */ | |
| int sqlite3PcacheSetPageSize(PCache *pCache, int szPage){ | |
| assert( pCache->nRefSum==0 && pCache->pDirty==0 ); | |
| if( pCache->szPage ){ | |
| sqlite3_pcache *pNew; | |
| pNew = sqlite3GlobalConfig.pcache2.xCreate( | |
| szPage, pCache->szExtra + ROUND8(sizeof(PgHdr)), | |
| pCache->bPurgeable | |
| ); | |
| if( pNew==0 ) return SQLITE_NOMEM_BKPT; | |
| sqlite3GlobalConfig.pcache2.xCachesize(pNew, numberOfCachePages(pCache)); | |
| if( pCache->pCache ){ | |
| sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); | |
| } | |
| pCache->pCache = pNew; | |
| pCache->szPage = szPage; | |
| pcacheTrace(("%p.PAGESIZE %d\n",pCache,szPage)); | |
| } | |
| return SQLITE_OK; | |
| } | |
| /* | |
| ** Try to obtain a page from the cache. | |
| ** | |
| ** This routine returns a pointer to an sqlite3_pcache_page object if | |
| ** such an object is already in cache, or if a new one is created. | |
| ** This routine returns a NULL pointer if the object was not in cache | |
| ** and could not be created. | |
| ** | |
| ** The createFlags should be 0 to check for existing pages and should | |
| ** be 3 (not 1, but 3) to try to create a new page. | |
| ** | |
| ** If the createFlag is 0, then NULL is always returned if the page | |
| ** is not already in the cache. If createFlag is 1, then a new page | |
| ** is created only if that can be done without spilling dirty pages | |
| ** and without exceeding the cache size limit. | |
| ** | |
| ** The caller needs to invoke sqlite3PcacheFetchFinish() to properly | |
| ** initialize the sqlite3_pcache_page object and convert it into a | |
| ** PgHdr object. The sqlite3PcacheFetch() and sqlite3PcacheFetchFinish() | |
| ** routines are split this way for performance reasons. When separated | |
| ** they can both (usually) operate without having to push values to | |
| ** the stack on entry and pop them back off on exit, which saves a | |
| ** lot of pushing and popping. | |
| */ | |
| sqlite3_pcache_page *sqlite3PcacheFetch( | |
| PCache *pCache, /* Obtain the page from this cache */ | |
| Pgno pgno, /* Page number to obtain */ | |
| int createFlag /* If true, create page if it does not exist already */ | |
| ){ | |
| int eCreate; | |
| sqlite3_pcache_page *pRes; | |
| assert( pCache!=0 ); | |
| assert( pCache->pCache!=0 ); | |
| assert( createFlag==3 || createFlag==0 ); | |
| assert( pCache->eCreate==((pCache->bPurgeable && pCache->pDirty) ? 1 : 2) ); | |
| /* eCreate defines what to do if the page does not exist. | |
| ** 0 Do not allocate a new page. (createFlag==0) | |
| ** 1 Allocate a new page if doing so is inexpensive. | |
| ** (createFlag==1 AND bPurgeable AND pDirty) | |
| ** 2 Allocate a new page even it doing so is difficult. | |
| ** (createFlag==1 AND !(bPurgeable AND pDirty) | |
| */ | |
| eCreate = createFlag & pCache->eCreate; | |
| assert( eCreate==0 || eCreate==1 || eCreate==2 ); | |
| assert( createFlag==0 || pCache->eCreate==eCreate ); | |
| assert( createFlag==0 || eCreate==1+(!pCache->bPurgeable||!pCache->pDirty) ); | |
| pRes = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, eCreate); | |
| pcacheTrace(("%p.FETCH %d%s (result: %p)\n",pCache,pgno, | |
| createFlag?" create":"",pRes)); | |
| return pRes; | |
| } | |
| /* | |
| ** If the sqlite3PcacheFetch() routine is unable to allocate a new | |
| ** page because no clean pages are available for reuse and the cache | |
| ** size limit has been reached, then this routine can be invoked to | |
| ** try harder to allocate a page. This routine might invoke the stress | |
| ** callback to spill dirty pages to the journal. It will then try to | |
| ** allocate the new page and will only fail to allocate a new page on | |
| ** an OOM error. | |
| ** | |
| ** This routine should be invoked only after sqlite3PcacheFetch() fails. | |
| */ | |
| int sqlite3PcacheFetchStress( | |
| PCache *pCache, /* Obtain the page from this cache */ | |
| Pgno pgno, /* Page number to obtain */ | |
| sqlite3_pcache_page **ppPage /* Write result here */ | |
| ){ | |
| PgHdr *pPg; | |
| if( pCache->eCreate==2 ) return 0; | |
| if( sqlite3PcachePagecount(pCache)>pCache->szSpill ){ | |
| /* Find a dirty page to write-out and recycle. First try to find a | |
| ** page that does not require a journal-sync (one with PGHDR_NEED_SYNC | |
| ** cleared), but if that is not possible settle for any other | |
| ** unreferenced dirty page. | |
| ** | |
| ** If the LRU page in the dirty list that has a clear PGHDR_NEED_SYNC | |
| ** flag is currently referenced, then the following may leave pSynced | |
| ** set incorrectly (pointing to other than the LRU page with NEED_SYNC | |
| ** cleared). This is Ok, as pSynced is just an optimization. */ | |
| for(pPg=pCache->pSynced; | |
| pPg && (pPg->nRef || (pPg->flags&PGHDR_NEED_SYNC)); | |
| pPg=pPg->pDirtyPrev | |
| ); | |
| pCache->pSynced = pPg; | |
| if( !pPg ){ | |
| for(pPg=pCache->pDirtyTail; pPg && pPg->nRef; pPg=pPg->pDirtyPrev); | |
| } | |
| if( pPg ){ | |
| int rc; | |
| #ifdef SQLITE_LOG_CACHE_SPILL | |
| sqlite3_log(SQLITE_FULL, | |
| "spill page %d making room for %d - cache used: %d/%d", | |
| pPg->pgno, pgno, | |
| sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache), | |
| numberOfCachePages(pCache)); | |
| #endif | |
| pcacheTrace(("%p.SPILL %d\n",pCache,pPg->pgno)); | |
| rc = pCache->xStress(pCache->pStress, pPg); | |
| pcacheDump(pCache); | |
| if( rc!=SQLITE_OK && rc!=SQLITE_BUSY ){ | |
| return rc; | |
| } | |
| } | |
| } | |
| *ppPage = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache, pgno, 2); | |
| return *ppPage==0 ? SQLITE_NOMEM_BKPT : SQLITE_OK; | |
| } | |
| /* | |
| ** This is a helper routine for sqlite3PcacheFetchFinish() | |
| ** | |
| ** In the uncommon case where the page being fetched has not been | |
| ** initialized, this routine is invoked to do the initialization. | |
| ** This routine is broken out into a separate function since it | |
| ** requires extra stack manipulation that can be avoided in the common | |
| ** case. | |
| */ | |
| static SQLITE_NOINLINE PgHdr *pcacheFetchFinishWithInit( | |
| PCache *pCache, /* Obtain the page from this cache */ | |
| Pgno pgno, /* Page number obtained */ | |
| sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ | |
| ){ | |
| PgHdr *pPgHdr; | |
| assert( pPage!=0 ); | |
| pPgHdr = (PgHdr*)pPage->pExtra; | |
| assert( pPgHdr->pPage==0 ); | |
| memset(&pPgHdr->pDirty, 0, sizeof(PgHdr) - offsetof(PgHdr,pDirty)); | |
| pPgHdr->pPage = pPage; | |
| pPgHdr->pData = pPage->pBuf; | |
| pPgHdr->pExtra = (void *)&pPgHdr[1]; | |
| memset(pPgHdr->pExtra, 0, 8); | |
| pPgHdr->pCache = pCache; | |
| pPgHdr->pgno = pgno; | |
| pPgHdr->flags = PGHDR_CLEAN; | |
| return sqlite3PcacheFetchFinish(pCache,pgno,pPage); | |
| } | |
| /* | |
| ** This routine converts the sqlite3_pcache_page object returned by | |
| ** sqlite3PcacheFetch() into an initialized PgHdr object. This routine | |
| ** must be called after sqlite3PcacheFetch() in order to get a usable | |
| ** result. | |
| */ | |
| PgHdr *sqlite3PcacheFetchFinish( | |
| PCache *pCache, /* Obtain the page from this cache */ | |
| Pgno pgno, /* Page number obtained */ | |
| sqlite3_pcache_page *pPage /* Page obtained by prior PcacheFetch() call */ | |
| ){ | |
| PgHdr *pPgHdr; | |
| assert( pPage!=0 ); | |
| pPgHdr = (PgHdr *)pPage->pExtra; | |
| if( !pPgHdr->pPage ){ | |
| return pcacheFetchFinishWithInit(pCache, pgno, pPage); | |
| } | |
| pCache->nRefSum++; | |
| pPgHdr->nRef++; | |
| assert( sqlite3PcachePageSanity(pPgHdr) ); | |
| return pPgHdr; | |
| } | |
| /* | |
| ** Decrement the reference count on a page. If the page is clean and the | |
| ** reference count drops to 0, then it is made eligible for recycling. | |
| */ | |
| void SQLITE_NOINLINE sqlite3PcacheRelease(PgHdr *p){ | |
| assert( p->nRef>0 ); | |
| p->pCache->nRefSum--; | |
| if( (--p->nRef)==0 ){ | |
| if( p->flags&PGHDR_CLEAN ){ | |
| pcacheUnpin(p); | |
| }else{ | |
| pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); | |
| } | |
| } | |
| } | |
| /* | |
| ** Increase the reference count of a supplied page by 1. | |
| */ | |
| void sqlite3PcacheRef(PgHdr *p){ | |
| assert(p->nRef>0); | |
| assert( sqlite3PcachePageSanity(p) ); | |
| p->nRef++; | |
| p->pCache->nRefSum++; | |
| } | |
| /* | |
| ** Drop a page from the cache. There must be exactly one reference to the | |
| ** page. This function deletes that reference, so after it returns the | |
| ** page pointed to by p is invalid. | |
| */ | |
| void sqlite3PcacheDrop(PgHdr *p){ | |
| assert( p->nRef==1 ); | |
| assert( sqlite3PcachePageSanity(p) ); | |
| if( p->flags&PGHDR_DIRTY ){ | |
| pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); | |
| } | |
| p->pCache->nRefSum--; | |
| sqlite3GlobalConfig.pcache2.xUnpin(p->pCache->pCache, p->pPage, 1); | |
| } | |
| /* | |
| ** Make sure the page is marked as dirty. If it isn't dirty already, | |
| ** make it so. | |
| */ | |
| void sqlite3PcacheMakeDirty(PgHdr *p){ | |
| assert( p->nRef>0 ); | |
| assert( sqlite3PcachePageSanity(p) ); | |
| if( p->flags & (PGHDR_CLEAN|PGHDR_DONT_WRITE) ){ /*OPTIMIZATION-IF-FALSE*/ | |
| p->flags &= ~PGHDR_DONT_WRITE; | |
| if( p->flags & PGHDR_CLEAN ){ | |
| p->flags ^= (PGHDR_DIRTY|PGHDR_CLEAN); | |
| pcacheTrace(("%p.DIRTY %d\n",p->pCache,p->pgno)); | |
| assert( (p->flags & (PGHDR_DIRTY|PGHDR_CLEAN))==PGHDR_DIRTY ); | |
| pcacheManageDirtyList(p, PCACHE_DIRTYLIST_ADD); | |
| } | |
| assert( sqlite3PcachePageSanity(p) ); | |
| } | |
| } | |
| /* | |
| ** Make sure the page is marked as clean. If it isn't clean already, | |
| ** make it so. | |
| */ | |
| void sqlite3PcacheMakeClean(PgHdr *p){ | |
| assert( sqlite3PcachePageSanity(p) ); | |
| assert( (p->flags & PGHDR_DIRTY)!=0 ); | |
| assert( (p->flags & PGHDR_CLEAN)==0 ); | |
| pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); | |
| p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE); | |
| p->flags |= PGHDR_CLEAN; | |
| pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno)); | |
| assert( sqlite3PcachePageSanity(p) ); | |
| if( p->nRef==0 ){ | |
| pcacheUnpin(p); | |
| } | |
| } | |
| /* | |
| ** Make every page in the cache clean. | |
| */ | |
| void sqlite3PcacheCleanAll(PCache *pCache){ | |
| PgHdr *p; | |
| pcacheTrace(("%p.CLEAN-ALL\n",pCache)); | |
| while( (p = pCache->pDirty)!=0 ){ | |
| sqlite3PcacheMakeClean(p); | |
| } | |
| } | |
| /* | |
| ** Clear the PGHDR_NEED_SYNC and PGHDR_WRITEABLE flag from all dirty pages. | |
| */ | |
| void sqlite3PcacheClearWritable(PCache *pCache){ | |
| PgHdr *p; | |
| pcacheTrace(("%p.CLEAR-WRITEABLE\n",pCache)); | |
| for(p=pCache->pDirty; p; p=p->pDirtyNext){ | |
| p->flags &= ~(PGHDR_NEED_SYNC|PGHDR_WRITEABLE); | |
| } | |
| pCache->pSynced = pCache->pDirtyTail; | |
| } | |
| /* | |
| ** Clear the PGHDR_NEED_SYNC flag from all dirty pages. | |
| */ | |
| void sqlite3PcacheClearSyncFlags(PCache *pCache){ | |
| PgHdr *p; | |
| for(p=pCache->pDirty; p; p=p->pDirtyNext){ | |
| p->flags &= ~PGHDR_NEED_SYNC; | |
| } | |
| pCache->pSynced = pCache->pDirtyTail; | |
| } | |
| /* | |
| ** Change the page number of page p to newPgno. | |
| */ | |
| void sqlite3PcacheMove(PgHdr *p, Pgno newPgno){ | |
| PCache *pCache = p->pCache; | |
| assert( p->nRef>0 ); | |
| assert( newPgno>0 ); | |
| assert( sqlite3PcachePageSanity(p) ); | |
| pcacheTrace(("%p.MOVE %d -> %d\n",pCache,p->pgno,newPgno)); | |
| sqlite3GlobalConfig.pcache2.xRekey(pCache->pCache, p->pPage, p->pgno,newPgno); | |
| p->pgno = newPgno; | |
| if( (p->flags&PGHDR_DIRTY) && (p->flags&PGHDR_NEED_SYNC) ){ | |
| pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); | |
| } | |
| } | |
| /* | |
| ** Drop every cache entry whose page number is greater than "pgno". The | |
| ** caller must ensure that there are no outstanding references to any pages | |
| ** other than page 1 with a page number greater than pgno. | |
| ** | |
| ** If there is a reference to page 1 and the pgno parameter passed to this | |
| ** function is 0, then the data area associated with page 1 is zeroed, but | |
| ** the page object is not dropped. | |
| */ | |
| void sqlite3PcacheTruncate(PCache *pCache, Pgno pgno){ | |
| if( pCache->pCache ){ | |
| PgHdr *p; | |
| PgHdr *pNext; | |
| pcacheTrace(("%p.TRUNCATE %d\n",pCache,pgno)); | |
| for(p=pCache->pDirty; p; p=pNext){ | |
| pNext = p->pDirtyNext; | |
| /* This routine never gets call with a positive pgno except right | |
| ** after sqlite3PcacheCleanAll(). So if there are dirty pages, | |
| ** it must be that pgno==0. | |
| */ | |
| assert( p->pgno>0 ); | |
| if( p->pgno>pgno ){ | |
| assert( p->flags&PGHDR_DIRTY ); | |
| sqlite3PcacheMakeClean(p); | |
| } | |
| } | |
| if( pgno==0 && pCache->nRefSum ){ | |
| sqlite3_pcache_page *pPage1; | |
| pPage1 = sqlite3GlobalConfig.pcache2.xFetch(pCache->pCache,1,0); | |
| if( ALWAYS(pPage1) ){ /* Page 1 is always available in cache, because | |
| ** pCache->nRefSum>0 */ | |
| memset(pPage1->pBuf, 0, pCache->szPage); | |
| pgno = 1; | |
| } | |
| } | |
| sqlite3GlobalConfig.pcache2.xTruncate(pCache->pCache, pgno+1); | |
| } | |
| } | |
| /* | |
| ** Close a cache. | |
| */ | |
| void sqlite3PcacheClose(PCache *pCache){ | |
| assert( pCache->pCache!=0 ); | |
| pcacheTrace(("%p.CLOSE\n",pCache)); | |
| sqlite3GlobalConfig.pcache2.xDestroy(pCache->pCache); | |
| } | |
| /* | |
| ** Discard the contents of the cache. | |
| */ | |
| void sqlite3PcacheClear(PCache *pCache){ | |
| sqlite3PcacheTruncate(pCache, 0); | |
| } | |
| /* | |
| ** Merge two lists of pages connected by pDirty and in pgno order. | |
| ** Do not bother fixing the pDirtyPrev pointers. | |
| */ | |
| static PgHdr *pcacheMergeDirtyList(PgHdr *pA, PgHdr *pB){ | |
| PgHdr result, *pTail; | |
| pTail = &result; | |
| assert( pA!=0 && pB!=0 ); | |
| for(;;){ | |
| if( pA->pgno<pB->pgno ){ | |
| pTail->pDirty = pA; | |
| pTail = pA; | |
| pA = pA->pDirty; | |
| if( pA==0 ){ | |
| pTail->pDirty = pB; | |
| break; | |
| } | |
| }else{ | |
| pTail->pDirty = pB; | |
| pTail = pB; | |
| pB = pB->pDirty; | |
| if( pB==0 ){ | |
| pTail->pDirty = pA; | |
| break; | |
| } | |
| } | |
| } | |
| return result.pDirty; | |
| } | |
| /* | |
| ** Sort the list of pages in accending order by pgno. Pages are | |
| ** connected by pDirty pointers. The pDirtyPrev pointers are | |
| ** corrupted by this sort. | |
| ** | |
| ** Since there cannot be more than 2^31 distinct pages in a database, | |
| ** there cannot be more than 31 buckets required by the merge sorter. | |
| ** One extra bucket is added to catch overflow in case something | |
| ** ever changes to make the previous sentence incorrect. | |
| */ | |
| #define N_SORT_BUCKET 32 | |
| static PgHdr *pcacheSortDirtyList(PgHdr *pIn){ | |
| PgHdr *a[N_SORT_BUCKET], *p; | |
| int i; | |
| memset(a, 0, sizeof(a)); | |
| while( pIn ){ | |
| p = pIn; | |
| pIn = p->pDirty; | |
| p->pDirty = 0; | |
| for(i=0; ALWAYS(i<N_SORT_BUCKET-1); i++){ | |
| if( a[i]==0 ){ | |
| a[i] = p; | |
| break; | |
| }else{ | |
| p = pcacheMergeDirtyList(a[i], p); | |
| a[i] = 0; | |
| } | |
| } | |
| if( NEVER(i==N_SORT_BUCKET-1) ){ | |
| /* To get here, there need to be 2^(N_SORT_BUCKET) elements in | |
| ** the input list. But that is impossible. | |
| */ | |
| a[i] = pcacheMergeDirtyList(a[i], p); | |
| } | |
| } | |
| p = a[0]; | |
| for(i=1; i<N_SORT_BUCKET; i++){ | |
| if( a[i]==0 ) continue; | |
| p = p ? pcacheMergeDirtyList(p, a[i]) : a[i]; | |
| } | |
| return p; | |
| } | |
| /* | |
| ** Return a list of all dirty pages in the cache, sorted by page number. | |
| */ | |
| PgHdr *sqlite3PcacheDirtyList(PCache *pCache){ | |
| PgHdr *p; | |
| for(p=pCache->pDirty; p; p=p->pDirtyNext){ | |
| p->pDirty = p->pDirtyNext; | |
| } | |
| return pcacheSortDirtyList(pCache->pDirty); | |
| } | |
| /* | |
| ** Return the total number of references to all pages held by the cache. | |
| ** | |
| ** This is not the total number of pages referenced, but the sum of the | |
| ** reference count for all pages. | |
| */ | |
| int sqlite3PcacheRefCount(PCache *pCache){ | |
| return pCache->nRefSum; | |
| } | |
| /* | |
| ** Return the number of references to the page supplied as an argument. | |
| */ | |
| int sqlite3PcachePageRefcount(PgHdr *p){ | |
| return p->nRef; | |
| } | |
| /* | |
| ** Return the total number of pages in the cache. | |
| */ | |
| int sqlite3PcachePagecount(PCache *pCache){ | |
| assert( pCache->pCache!=0 ); | |
| return sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache); | |
| } | |
| #ifdef SQLITE_TEST | |
| /* | |
| ** Get the suggested cache-size value. | |
| */ | |
| int sqlite3PcacheGetCachesize(PCache *pCache){ | |
| return numberOfCachePages(pCache); | |
| } | |
| #endif | |
| /* | |
| ** Set the suggested cache-size value. | |
| */ | |
| void sqlite3PcacheSetCachesize(PCache *pCache, int mxPage){ | |
| assert( pCache->pCache!=0 ); | |
| pCache->szCache = mxPage; | |
| sqlite3GlobalConfig.pcache2.xCachesize(pCache->pCache, | |
| numberOfCachePages(pCache)); | |
| } | |
| /* | |
| ** Set the suggested cache-spill value. Make no changes if if the | |
| ** argument is zero. Return the effective cache-spill size, which will | |
| ** be the larger of the szSpill and szCache. | |
| */ | |
| int sqlite3PcacheSetSpillsize(PCache *p, int mxPage){ | |
| int res; | |
| assert( p->pCache!=0 ); | |
| if( mxPage ){ | |
| if( mxPage<0 ){ | |
| mxPage = (int)((-1024*(i64)mxPage)/(p->szPage+p->szExtra)); | |
| } | |
| p->szSpill = mxPage; | |
| } | |
| res = numberOfCachePages(p); | |
| if( res<p->szSpill ) res = p->szSpill; | |
| return res; | |
| } | |
| /* | |
| ** Free up as much memory as possible from the page cache. | |
| */ | |
| void sqlite3PcacheShrink(PCache *pCache){ | |
| assert( pCache->pCache!=0 ); | |
| sqlite3GlobalConfig.pcache2.xShrink(pCache->pCache); | |
| } | |
| /* | |
| ** Return the size of the header added by this middleware layer | |
| ** in the page-cache hierarchy. | |
| */ | |
| int sqlite3HeaderSizePcache(void){ return ROUND8(sizeof(PgHdr)); } | |
| /* | |
| ** Return the number of dirty pages currently in the cache, as a percentage | |
| ** of the configured cache size. | |
| */ | |
| int sqlite3PCachePercentDirty(PCache *pCache){ | |
| PgHdr *pDirty; | |
| int nDirty = 0; | |
| int nCache = numberOfCachePages(pCache); | |
| for(pDirty=pCache->pDirty; pDirty; pDirty=pDirty->pDirtyNext) nDirty++; | |
| return nCache ? (int)(((i64)nDirty * 100) / nCache) : 0; | |
| } | |
| #if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) | |
| /* | |
| ** For all dirty pages currently in the cache, invoke the specified | |
| ** callback. This is only used if the SQLITE_CHECK_PAGES macro is | |
| ** defined. | |
| */ | |
| void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *)){ | |
| PgHdr *pDirty; | |
| for(pDirty=pCache->pDirty; pDirty; pDirty=pDirty->pDirtyNext){ | |
| xIter(pDirty); | |
| } | |
| } | |
| #endif |