| /* | |
| ** 2008 June 18 | |
| ** | |
| ** The author disclaims copyright to this source code. In place of | |
| ** a legal notice, here is a blessing: | |
| ** | |
| ** May you do good and not evil. | |
| ** May you find forgiveness for yourself and forgive others. | |
| ** May you share freely, never taking more than you give. | |
| ** | |
| ************************************************************************* | |
| ** | |
| ** This module implements the sqlite3_status() interface and related | |
| ** functionality. | |
| */ | |
| #include "sqliteInt.h" | |
| #include "vdbeInt.h" | |
| /* | |
| ** Variables in which to record status information. | |
| */ | |
| #if SQLITE_PTRSIZE>4 | |
| typedef sqlite3_int64 sqlite3StatValueType; | |
| #else | |
| typedef u32 sqlite3StatValueType; | |
| #endif | |
| typedef struct sqlite3StatType sqlite3StatType; | |
| static SQLITE_WSD struct sqlite3StatType { | |
| sqlite3StatValueType nowValue[10]; /* Current value */ | |
| sqlite3StatValueType mxValue[10]; /* Maximum value */ | |
| } sqlite3Stat = { {0,}, {0,} }; | |
| /* | |
| ** Elements of sqlite3Stat[] are protected by either the memory allocator | |
| ** mutex, or by the pcache1 mutex. The following array determines which. | |
| */ | |
| static const char statMutex[] = { | |
| 0, /* SQLITE_STATUS_MEMORY_USED */ | |
| 1, /* SQLITE_STATUS_PAGECACHE_USED */ | |
| 1, /* SQLITE_STATUS_PAGECACHE_OVERFLOW */ | |
| 0, /* SQLITE_STATUS_SCRATCH_USED */ | |
| 0, /* SQLITE_STATUS_SCRATCH_OVERFLOW */ | |
| 0, /* SQLITE_STATUS_MALLOC_SIZE */ | |
| 0, /* SQLITE_STATUS_PARSER_STACK */ | |
| 1, /* SQLITE_STATUS_PAGECACHE_SIZE */ | |
| 0, /* SQLITE_STATUS_SCRATCH_SIZE */ | |
| 0, /* SQLITE_STATUS_MALLOC_COUNT */ | |
| }; | |
| /* The "wsdStat" macro will resolve to the status information | |
| ** state vector. If writable static data is unsupported on the target, | |
| ** we have to locate the state vector at run-time. In the more common | |
| ** case where writable static data is supported, wsdStat can refer directly | |
| ** to the "sqlite3Stat" state vector declared above. | |
| */ | |
| #ifdef SQLITE_OMIT_WSD | |
| # define wsdStatInit sqlite3StatType *x = &GLOBAL(sqlite3StatType,sqlite3Stat) | |
| # define wsdStat x[0] | |
| #else | |
| # define wsdStatInit | |
| # define wsdStat sqlite3Stat | |
| #endif | |
| /* | |
| ** Return the current value of a status parameter. The caller must | |
| ** be holding the appropriate mutex. | |
| */ | |
| sqlite3_int64 sqlite3StatusValue(int op){ | |
| wsdStatInit; | |
| assert( op>=0 && op<ArraySize(wsdStat.nowValue) ); | |
| assert( op>=0 && op<ArraySize(statMutex) ); | |
| assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex() | |
| : sqlite3MallocMutex()) ); | |
| return wsdStat.nowValue[op]; | |
| } | |
| /* | |
| ** Add N to the value of a status record. The caller must hold the | |
| ** appropriate mutex. (Locking is checked by assert()). | |
| ** | |
| ** The StatusUp() routine can accept positive or negative values for N. | |
| ** The value of N is added to the current status value and the high-water | |
| ** mark is adjusted if necessary. | |
| ** | |
| ** The StatusDown() routine lowers the current value by N. The highwater | |
| ** mark is unchanged. N must be non-negative for StatusDown(). | |
| */ | |
| void sqlite3StatusUp(int op, int N){ | |
| wsdStatInit; | |
| assert( op>=0 && op<ArraySize(wsdStat.nowValue) ); | |
| assert( op>=0 && op<ArraySize(statMutex) ); | |
| assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex() | |
| : sqlite3MallocMutex()) ); | |
| wsdStat.nowValue[op] += N; | |
| if( wsdStat.nowValue[op]>wsdStat.mxValue[op] ){ | |
| wsdStat.mxValue[op] = wsdStat.nowValue[op]; | |
| } | |
| } | |
| void sqlite3StatusDown(int op, int N){ | |
| wsdStatInit; | |
| assert( N>=0 ); | |
| assert( op>=0 && op<ArraySize(statMutex) ); | |
| assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex() | |
| : sqlite3MallocMutex()) ); | |
| assert( op>=0 && op<ArraySize(wsdStat.nowValue) ); | |
| wsdStat.nowValue[op] -= N; | |
| } | |
| /* | |
| ** Adjust the highwater mark if necessary. | |
| ** The caller must hold the appropriate mutex. | |
| */ | |
| void sqlite3StatusHighwater(int op, int X){ | |
| sqlite3StatValueType newValue; | |
| wsdStatInit; | |
| assert( X>=0 ); | |
| newValue = (sqlite3StatValueType)X; | |
| assert( op>=0 && op<ArraySize(wsdStat.nowValue) ); | |
| assert( op>=0 && op<ArraySize(statMutex) ); | |
| assert( sqlite3_mutex_held(statMutex[op] ? sqlite3Pcache1Mutex() | |
| : sqlite3MallocMutex()) ); | |
| assert( op==SQLITE_STATUS_MALLOC_SIZE | |
| || op==SQLITE_STATUS_PAGECACHE_SIZE | |
| || op==SQLITE_STATUS_PARSER_STACK ); | |
| if( newValue>wsdStat.mxValue[op] ){ | |
| wsdStat.mxValue[op] = newValue; | |
| } | |
| } | |
| /* | |
| ** Query status information. | |
| */ | |
| int sqlite3_status64( | |
| int op, | |
| sqlite3_int64 *pCurrent, | |
| sqlite3_int64 *pHighwater, | |
| int resetFlag | |
| ){ | |
| sqlite3_mutex *pMutex; | |
| wsdStatInit; | |
| if( op<0 || op>=ArraySize(wsdStat.nowValue) ){ | |
| return SQLITE_MISUSE_BKPT; | |
| } | |
| #ifdef SQLITE_ENABLE_API_ARMOR | |
| if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT; | |
| #endif | |
| pMutex = statMutex[op] ? sqlite3Pcache1Mutex() : sqlite3MallocMutex(); | |
| sqlite3_mutex_enter(pMutex); | |
| *pCurrent = wsdStat.nowValue[op]; | |
| *pHighwater = wsdStat.mxValue[op]; | |
| if( resetFlag ){ | |
| wsdStat.mxValue[op] = wsdStat.nowValue[op]; | |
| } | |
| sqlite3_mutex_leave(pMutex); | |
| (void)pMutex; /* Prevent warning when SQLITE_THREADSAFE=0 */ | |
| return SQLITE_OK; | |
| } | |
| int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){ | |
| sqlite3_int64 iCur = 0, iHwtr = 0; | |
| int rc; | |
| #ifdef SQLITE_ENABLE_API_ARMOR | |
| if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT; | |
| #endif | |
| rc = sqlite3_status64(op, &iCur, &iHwtr, resetFlag); | |
| if( rc==0 ){ | |
| *pCurrent = (int)iCur; | |
| *pHighwater = (int)iHwtr; | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Return the number of LookasideSlot elements on the linked list | |
| */ | |
| static u32 countLookasideSlots(LookasideSlot *p){ | |
| u32 cnt = 0; | |
| while( p ){ | |
| p = p->pNext; | |
| cnt++; | |
| } | |
| return cnt; | |
| } | |
| /* | |
| ** Count the number of slots of lookaside memory that are outstanding | |
| */ | |
| int sqlite3LookasideUsed(sqlite3 *db, int *pHighwater){ | |
| u32 nInit = countLookasideSlots(db->lookaside.pInit); | |
| u32 nFree = countLookasideSlots(db->lookaside.pFree); | |
| if( pHighwater ) *pHighwater = db->lookaside.nSlot - nInit; | |
| return db->lookaside.nSlot - (nInit+nFree); | |
| } | |
| /* | |
| ** Query status information for a single database connection | |
| */ | |
| int sqlite3_db_status( | |
| sqlite3 *db, /* The database connection whose status is desired */ | |
| int op, /* Status verb */ | |
| int *pCurrent, /* Write current value here */ | |
| int *pHighwater, /* Write high-water mark here */ | |
| int resetFlag /* Reset high-water mark if true */ | |
| ){ | |
| int rc = SQLITE_OK; /* Return code */ | |
| #ifdef SQLITE_ENABLE_API_ARMOR | |
| if( !sqlite3SafetyCheckOk(db) || pCurrent==0|| pHighwater==0 ){ | |
| return SQLITE_MISUSE_BKPT; | |
| } | |
| #endif | |
| sqlite3_mutex_enter(db->mutex); | |
| switch( op ){ | |
| case SQLITE_DBSTATUS_LOOKASIDE_USED: { | |
| *pCurrent = sqlite3LookasideUsed(db, pHighwater); | |
| if( resetFlag ){ | |
| LookasideSlot *p = db->lookaside.pFree; | |
| if( p ){ | |
| while( p->pNext ) p = p->pNext; | |
| p->pNext = db->lookaside.pInit; | |
| db->lookaside.pInit = db->lookaside.pFree; | |
| db->lookaside.pFree = 0; | |
| } | |
| } | |
| break; | |
| } | |
| case SQLITE_DBSTATUS_LOOKASIDE_HIT: | |
| case SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE: | |
| case SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL: { | |
| testcase( op==SQLITE_DBSTATUS_LOOKASIDE_HIT ); | |
| testcase( op==SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE ); | |
| testcase( op==SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL ); | |
| assert( (op-SQLITE_DBSTATUS_LOOKASIDE_HIT)>=0 ); | |
| assert( (op-SQLITE_DBSTATUS_LOOKASIDE_HIT)<3 ); | |
| *pCurrent = 0; | |
| *pHighwater = db->lookaside.anStat[op - SQLITE_DBSTATUS_LOOKASIDE_HIT]; | |
| if( resetFlag ){ | |
| db->lookaside.anStat[op - SQLITE_DBSTATUS_LOOKASIDE_HIT] = 0; | |
| } | |
| break; | |
| } | |
| /* | |
| ** Return an approximation for the amount of memory currently used | |
| ** by all pagers associated with the given database connection. The | |
| ** highwater mark is meaningless and is returned as zero. | |
| */ | |
| case SQLITE_DBSTATUS_CACHE_USED_SHARED: | |
| case SQLITE_DBSTATUS_CACHE_USED: { | |
| int totalUsed = 0; | |
| int i; | |
| sqlite3BtreeEnterAll(db); | |
| for(i=0; i<db->nDb; i++){ | |
| Btree *pBt = db->aDb[i].pBt; | |
| if( pBt ){ | |
| Pager *pPager = sqlite3BtreePager(pBt); | |
| int nByte = sqlite3PagerMemUsed(pPager); | |
| if( op==SQLITE_DBSTATUS_CACHE_USED_SHARED ){ | |
| nByte = nByte / sqlite3BtreeConnectionCount(pBt); | |
| } | |
| totalUsed += nByte; | |
| } | |
| } | |
| sqlite3BtreeLeaveAll(db); | |
| *pCurrent = totalUsed; | |
| *pHighwater = 0; | |
| break; | |
| } | |
| /* | |
| ** *pCurrent gets an accurate estimate of the amount of memory used | |
| ** to store the schema for all databases (main, temp, and any ATTACHed | |
| ** databases. *pHighwater is set to zero. | |
| */ | |
| case SQLITE_DBSTATUS_SCHEMA_USED: { | |
| int i; /* Used to iterate through schemas */ | |
| int nByte = 0; /* Used to accumulate return value */ | |
| sqlite3BtreeEnterAll(db); | |
| db->pnBytesFreed = &nByte; | |
| for(i=0; i<db->nDb; i++){ | |
| Schema *pSchema = db->aDb[i].pSchema; | |
| if( ALWAYS(pSchema!=0) ){ | |
| HashElem *p; | |
| nByte += sqlite3GlobalConfig.m.xRoundup(sizeof(HashElem)) * ( | |
| pSchema->tblHash.count | |
| + pSchema->trigHash.count | |
| + pSchema->idxHash.count | |
| + pSchema->fkeyHash.count | |
| ); | |
| nByte += sqlite3_msize(pSchema->tblHash.ht); | |
| nByte += sqlite3_msize(pSchema->trigHash.ht); | |
| nByte += sqlite3_msize(pSchema->idxHash.ht); | |
| nByte += sqlite3_msize(pSchema->fkeyHash.ht); | |
| for(p=sqliteHashFirst(&pSchema->trigHash); p; p=sqliteHashNext(p)){ | |
| sqlite3DeleteTrigger(db, (Trigger*)sqliteHashData(p)); | |
| } | |
| for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){ | |
| sqlite3DeleteTable(db, (Table *)sqliteHashData(p)); | |
| } | |
| } | |
| } | |
| db->pnBytesFreed = 0; | |
| sqlite3BtreeLeaveAll(db); | |
| *pHighwater = 0; | |
| *pCurrent = nByte; | |
| break; | |
| } | |
| /* | |
| ** *pCurrent gets an accurate estimate of the amount of memory used | |
| ** to store all prepared statements. | |
| ** *pHighwater is set to zero. | |
| */ | |
| case SQLITE_DBSTATUS_STMT_USED: { | |
| struct Vdbe *pVdbe; /* Used to iterate through VMs */ | |
| int nByte = 0; /* Used to accumulate return value */ | |
| db->pnBytesFreed = &nByte; | |
| for(pVdbe=db->pVdbe; pVdbe; pVdbe=pVdbe->pNext){ | |
| sqlite3VdbeClearObject(db, pVdbe); | |
| sqlite3DbFree(db, pVdbe); | |
| } | |
| db->pnBytesFreed = 0; | |
| *pHighwater = 0; /* IMP: R-64479-57858 */ | |
| *pCurrent = nByte; | |
| break; | |
| } | |
| /* | |
| ** Set *pCurrent to the total cache hits or misses encountered by all | |
| ** pagers the database handle is connected to. *pHighwater is always set | |
| ** to zero. | |
| */ | |
| case SQLITE_DBSTATUS_CACHE_SPILL: | |
| op = SQLITE_DBSTATUS_CACHE_WRITE+1; | |
| /* Fall through into the next case */ | |
| case SQLITE_DBSTATUS_CACHE_HIT: | |
| case SQLITE_DBSTATUS_CACHE_MISS: | |
| case SQLITE_DBSTATUS_CACHE_WRITE:{ | |
| int i; | |
| int nRet = 0; | |
| assert( SQLITE_DBSTATUS_CACHE_MISS==SQLITE_DBSTATUS_CACHE_HIT+1 ); | |
| assert( SQLITE_DBSTATUS_CACHE_WRITE==SQLITE_DBSTATUS_CACHE_HIT+2 ); | |
| for(i=0; i<db->nDb; i++){ | |
| if( db->aDb[i].pBt ){ | |
| Pager *pPager = sqlite3BtreePager(db->aDb[i].pBt); | |
| sqlite3PagerCacheStat(pPager, op, resetFlag, &nRet); | |
| } | |
| } | |
| *pHighwater = 0; /* IMP: R-42420-56072 */ | |
| /* IMP: R-54100-20147 */ | |
| /* IMP: R-29431-39229 */ | |
| *pCurrent = nRet; | |
| break; | |
| } | |
| /* Set *pCurrent to non-zero if there are unresolved deferred foreign | |
| ** key constraints. Set *pCurrent to zero if all foreign key constraints | |
| ** have been satisfied. The *pHighwater is always set to zero. | |
| */ | |
| case SQLITE_DBSTATUS_DEFERRED_FKS: { | |
| *pHighwater = 0; /* IMP: R-11967-56545 */ | |
| *pCurrent = db->nDeferredImmCons>0 || db->nDeferredCons>0; | |
| break; | |
| } | |
| default: { | |
| rc = SQLITE_ERROR; | |
| } | |
| } | |
| sqlite3_mutex_leave(db->mutex); | |
| return rc; | |
| } |