| /* | |
| ** 2011 March 28 | |
| ** | |
| ** The author disclaims copyright to this source code. In place of | |
| ** a legal notice, here is a blessing: | |
| ** | |
| ** May you do good and not evil. | |
| ** May you find forgiveness for yourself and forgive others. | |
| ** May you share freely, never taking more than you give. | |
| ** | |
| ************************************************************************* | |
| ** | |
| ** The code in this file implements a Tcl interface used to test error | |
| ** handling in the os_unix.c module. Wrapper functions that support fault | |
| ** injection are registered as the low-level OS functions using the | |
| ** xSetSystemCall() method of the VFS. The Tcl interface is as follows: | |
| ** | |
| ** | |
| ** test_syscall install LIST | |
| ** Install wrapper functions for all system calls in argument LIST. | |
| ** LIST must be a list consisting of zero or more of the following | |
| ** literal values: | |
| ** | |
| ** open close access getcwd stat fstat | |
| ** ftruncate fcntl read pread pread64 write | |
| ** pwrite pwrite64 fchmod fallocate mmap | |
| ** | |
| ** test_syscall uninstall | |
| ** Uninstall all wrapper functions. | |
| ** | |
| ** test_syscall fault ?COUNT PERSIST? | |
| ** If [test_syscall fault] is invoked without the two arguments, fault | |
| ** injection is disabled. Otherwise, fault injection is configured to | |
| ** cause a failure on the COUNT'th next call to a system call with a | |
| ** wrapper function installed. A COUNT value of 1 means fail the next | |
| ** system call. | |
| ** | |
| ** Argument PERSIST is interpreted as a boolean. If true, the all | |
| ** system calls following the initial failure also fail. Otherwise, only | |
| ** the single transient failure is injected. | |
| ** | |
| ** test_syscall errno CALL ERRNO | |
| ** Set the value that the global "errno" is set to following a fault | |
| ** in call CALL. Argument CALL must be one of the system call names | |
| ** listed above (under [test_syscall install]). ERRNO is a symbolic | |
| ** name (i.e. "EACCES"). Not all errno codes are supported. Add extra | |
| ** to the aErrno table in function test_syscall_errno() below as | |
| ** required. | |
| ** | |
| ** test_syscall reset ?SYSTEM-CALL? | |
| ** With no argument, this is an alias for the [uninstall] command. However, | |
| ** this command uses a VFS call of the form: | |
| ** | |
| ** xSetSystemCall(pVfs, 0, 0); | |
| ** | |
| ** To restore the default system calls. The [uninstall] command restores | |
| ** each system call individually by calling (i.e.): | |
| ** | |
| ** xSetSystemCall(pVfs, "open", 0); | |
| ** | |
| ** With an argument, this command attempts to reset the system call named | |
| ** by the parameter using the same method as [uninstall]. | |
| ** | |
| ** test_syscall exists SYSTEM-CALL | |
| ** Return true if the named system call exists. Or false otherwise. | |
| ** | |
| ** test_syscall list | |
| ** Return a list of all system calls. The list is constructed using | |
| ** the xNextSystemCall() VFS method. | |
| ** | |
| ** test_syscall pagesize PGSZ | |
| ** If PGSZ is a power of two greater than 256, install a wrapper around | |
| ** OS function getpagesize() that reports the system page size as PGSZ. | |
| ** Or, if PGSZ is less than zero, remove any wrapper already installed. | |
| */ | |
| #include "sqliteInt.h" | |
| #include "sqlite3.h" | |
| #if defined(INCLUDE_SQLITE_TCL_H) | |
| # include "sqlite_tcl.h" | |
| #else | |
| # include "tcl.h" | |
| #endif | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <assert.h> | |
| #if SQLITE_OS_UNIX | |
| /* From main.c */ | |
| extern const char *sqlite3ErrName(int); | |
| #include <sys/mman.h> | |
| #include <sys/types.h> | |
| #include <errno.h> | |
| static struct TestSyscallGlobal { | |
| int bPersist; /* 1 for persistent errors, 0 for transient */ | |
| int nCount; /* Fail after this many more calls */ | |
| int nFail; /* Number of failures that have occurred */ | |
| int pgsz; | |
| sqlite3_syscall_ptr orig_getpagesize; | |
| } gSyscall = { 0, 0, 0, 0, 0 }; | |
| static int ts_open(const char *, int, int); | |
| static int ts_close(int fd); | |
| static int ts_access(const char *zPath, int mode); | |
| static char *ts_getcwd(char *zPath, size_t nPath); | |
| static int ts_stat(const char *zPath, struct stat *p); | |
| static int ts_fstat(int fd, struct stat *p); | |
| static int ts_ftruncate(int fd, off_t n); | |
| static int ts_fcntl(int fd, int cmd, ... ); | |
| static int ts_read(int fd, void *aBuf, size_t nBuf); | |
| static int ts_pread(int fd, void *aBuf, size_t nBuf, off_t off); | |
| /* Note: pread64() and pwrite64() actually use off64_t as the type on their | |
| ** last parameter. But that datatype is not defined on many systems | |
| ** (ex: Mac, OpenBSD). So substitute a likely equivalent: sqlite3_uint64 */ | |
| static int ts_pread64(int fd, void *aBuf, size_t nBuf, sqlite3_uint64 off); | |
| static int ts_write(int fd, const void *aBuf, size_t nBuf); | |
| static int ts_pwrite(int fd, const void *aBuf, size_t nBuf, off_t off); | |
| static int ts_pwrite64(int fd, const void *aBuf, size_t nBuf, sqlite3_uint64 off); | |
| static int ts_fchmod(int fd, mode_t mode); | |
| static int ts_fallocate(int fd, off_t off, off_t len); | |
| static void *ts_mmap(void *, size_t, int, int, int, off_t); | |
| static void *ts_mremap(void*, size_t, size_t, int, ...); | |
| struct TestSyscallArray { | |
| const char *zName; | |
| sqlite3_syscall_ptr xTest; | |
| sqlite3_syscall_ptr xOrig; | |
| int default_errno; /* Default value for errno following errors */ | |
| int custom_errno; /* Current value for errno if error */ | |
| } aSyscall[] = { | |
| /* 0 */ { "open", (sqlite3_syscall_ptr)ts_open, 0, EACCES, 0 }, | |
| /* 1 */ { "close", (sqlite3_syscall_ptr)ts_close, 0, 0, 0 }, | |
| /* 2 */ { "access", (sqlite3_syscall_ptr)ts_access, 0, 0, 0 }, | |
| /* 3 */ { "getcwd", (sqlite3_syscall_ptr)ts_getcwd, 0, 0, 0 }, | |
| /* 4 */ { "stat", (sqlite3_syscall_ptr)ts_stat, 0, 0, 0 }, | |
| /* 5 */ { "fstat", (sqlite3_syscall_ptr)ts_fstat, 0, 0, 0 }, | |
| /* 6 */ { "ftruncate", (sqlite3_syscall_ptr)ts_ftruncate, 0, EIO, 0 }, | |
| /* 7 */ { "fcntl", (sqlite3_syscall_ptr)ts_fcntl, 0, EACCES, 0 }, | |
| /* 8 */ { "read", (sqlite3_syscall_ptr)ts_read, 0, 0, 0 }, | |
| /* 9 */ { "pread", (sqlite3_syscall_ptr)ts_pread, 0, 0, 0 }, | |
| /* 10 */ { "pread64", (sqlite3_syscall_ptr)ts_pread64, 0, 0, 0 }, | |
| /* 11 */ { "write", (sqlite3_syscall_ptr)ts_write, 0, 0, 0 }, | |
| /* 12 */ { "pwrite", (sqlite3_syscall_ptr)ts_pwrite, 0, 0, 0 }, | |
| /* 13 */ { "pwrite64", (sqlite3_syscall_ptr)ts_pwrite64, 0, 0, 0 }, | |
| /* 14 */ { "fchmod", (sqlite3_syscall_ptr)ts_fchmod, 0, 0, 0 }, | |
| /* 15 */ { "fallocate", (sqlite3_syscall_ptr)ts_fallocate, 0, 0, 0 }, | |
| /* 16 */ { "mmap", (sqlite3_syscall_ptr)ts_mmap, 0, 0, 0 }, | |
| /* 17 */ { "mremap", (sqlite3_syscall_ptr)ts_mremap, 0, 0, 0 }, | |
| { 0, 0, 0, 0, 0 } | |
| }; | |
| #define orig_open ((int(*)(const char *, int, int))aSyscall[0].xOrig) | |
| #define orig_close ((int(*)(int))aSyscall[1].xOrig) | |
| #define orig_access ((int(*)(const char*,int))aSyscall[2].xOrig) | |
| #define orig_getcwd ((char*(*)(char*,size_t))aSyscall[3].xOrig) | |
| #define orig_stat ((int(*)(const char*,struct stat*))aSyscall[4].xOrig) | |
| #define orig_fstat ((int(*)(int,struct stat*))aSyscall[5].xOrig) | |
| #define orig_ftruncate ((int(*)(int,off_t))aSyscall[6].xOrig) | |
| #define orig_fcntl ((int(*)(int,int,...))aSyscall[7].xOrig) | |
| #define orig_read ((ssize_t(*)(int,void*,size_t))aSyscall[8].xOrig) | |
| #define orig_pread ((ssize_t(*)(int,void*,size_t,off_t))aSyscall[9].xOrig) | |
| #define orig_pread64 ((ssize_t(*)(int,void*,size_t,sqlite3_uint64))aSyscall[10].xOrig) | |
| #define orig_write ((ssize_t(*)(int,const void*,size_t))aSyscall[11].xOrig) | |
| #define orig_pwrite ((ssize_t(*)(int,const void*,size_t,off_t))\ | |
| aSyscall[12].xOrig) | |
| #define orig_pwrite64 ((ssize_t(*)(int,const void*,size_t,sqlite3_uint64))\ | |
| aSyscall[13].xOrig) | |
| #define orig_fchmod ((int(*)(int,mode_t))aSyscall[14].xOrig) | |
| #define orig_fallocate ((int(*)(int,off_t,off_t))aSyscall[15].xOrig) | |
| #define orig_mmap ((void*(*)(void*,size_t,int,int,int,off_t))aSyscall[16].xOrig) | |
| #define orig_mremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[17].xOrig) | |
| /* | |
| ** This function is called exactly once from within each invocation of a | |
| ** system call wrapper in this file. It returns 1 if the function should | |
| ** fail, or 0 if it should succeed. | |
| */ | |
| static int tsIsFail(void){ | |
| gSyscall.nCount--; | |
| if( gSyscall.nCount==0 || (gSyscall.nFail && gSyscall.bPersist) ){ | |
| gSyscall.nFail++; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| ** Return the current error-number value for function zFunc. zFunc must be | |
| ** the name of a system call in the aSyscall[] table. | |
| ** | |
| ** Usually, the current error-number is the value that errno should be set | |
| ** to if the named system call fails. The exception is "fallocate". See | |
| ** comments above the implementation of ts_fallocate() for details. | |
| */ | |
| static int tsErrno(const char *zFunc){ | |
| int i; | |
| int nFunc = strlen(zFunc); | |
| for(i=0; aSyscall[i].zName; i++){ | |
| if( strlen(aSyscall[i].zName)!=nFunc ) continue; | |
| if( memcmp(aSyscall[i].zName, zFunc, nFunc) ) continue; | |
| return aSyscall[i].custom_errno; | |
| } | |
| assert(0); | |
| return 0; | |
| } | |
| /* | |
| ** A wrapper around tsIsFail(). If tsIsFail() returns non-zero, set the | |
| ** value of errno before returning. | |
| */ | |
| static int tsIsFailErrno(const char *zFunc){ | |
| if( tsIsFail() ){ | |
| errno = tsErrno(zFunc); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| ** A wrapper around open(). | |
| */ | |
| static int ts_open(const char *zFile, int flags, int mode){ | |
| if( tsIsFailErrno("open") ){ | |
| return -1; | |
| } | |
| return orig_open(zFile, flags, mode); | |
| } | |
| /* | |
| ** A wrapper around close(). | |
| */ | |
| static int ts_close(int fd){ | |
| if( tsIsFail() ){ | |
| /* Even if simulating an error, close the original file-descriptor. | |
| ** This is to stop the test process from running out of file-descriptors | |
| ** when running a long test. If a call to close() appears to fail, SQLite | |
| ** never attempts to use the file-descriptor afterwards (or even to close | |
| ** it a second time). */ | |
| orig_close(fd); | |
| return -1; | |
| } | |
| return orig_close(fd); | |
| } | |
| /* | |
| ** A wrapper around access(). | |
| */ | |
| static int ts_access(const char *zPath, int mode){ | |
| if( tsIsFail() ){ | |
| return -1; | |
| } | |
| return orig_access(zPath, mode); | |
| } | |
| /* | |
| ** A wrapper around getcwd(). | |
| */ | |
| static char *ts_getcwd(char *zPath, size_t nPath){ | |
| if( tsIsFail() ){ | |
| return NULL; | |
| } | |
| return orig_getcwd(zPath, nPath); | |
| } | |
| /* | |
| ** A wrapper around stat(). | |
| */ | |
| static int ts_stat(const char *zPath, struct stat *p){ | |
| if( tsIsFail() ){ | |
| return -1; | |
| } | |
| return orig_stat(zPath, p); | |
| } | |
| /* | |
| ** A wrapper around fstat(). | |
| */ | |
| static int ts_fstat(int fd, struct stat *p){ | |
| if( tsIsFailErrno("fstat") ){ | |
| return -1; | |
| } | |
| return orig_fstat(fd, p); | |
| } | |
| /* | |
| ** A wrapper around ftruncate(). | |
| */ | |
| static int ts_ftruncate(int fd, off_t n){ | |
| if( tsIsFailErrno("ftruncate") ){ | |
| return -1; | |
| } | |
| return orig_ftruncate(fd, n); | |
| } | |
| /* | |
| ** A wrapper around fcntl(). | |
| */ | |
| static int ts_fcntl(int fd, int cmd, ... ){ | |
| va_list ap; | |
| void *pArg; | |
| if( tsIsFailErrno("fcntl") ){ | |
| return -1; | |
| } | |
| va_start(ap, cmd); | |
| pArg = va_arg(ap, void *); | |
| return orig_fcntl(fd, cmd, pArg); | |
| } | |
| /* | |
| ** A wrapper around read(). | |
| */ | |
| static int ts_read(int fd, void *aBuf, size_t nBuf){ | |
| if( tsIsFailErrno("read") ){ | |
| return -1; | |
| } | |
| return orig_read(fd, aBuf, nBuf); | |
| } | |
| /* | |
| ** A wrapper around pread(). | |
| */ | |
| static int ts_pread(int fd, void *aBuf, size_t nBuf, off_t off){ | |
| if( tsIsFailErrno("pread") ){ | |
| return -1; | |
| } | |
| return orig_pread(fd, aBuf, nBuf, off); | |
| } | |
| /* | |
| ** A wrapper around pread64(). | |
| */ | |
| static int ts_pread64(int fd, void *aBuf, size_t nBuf, sqlite3_uint64 off){ | |
| if( tsIsFailErrno("pread64") ){ | |
| return -1; | |
| } | |
| return orig_pread64(fd, aBuf, nBuf, off); | |
| } | |
| /* | |
| ** A wrapper around write(). | |
| */ | |
| static int ts_write(int fd, const void *aBuf, size_t nBuf){ | |
| if( tsIsFailErrno("write") ){ | |
| if( tsErrno("write")==EINTR ) orig_write(fd, aBuf, nBuf/2); | |
| return -1; | |
| } | |
| return orig_write(fd, aBuf, nBuf); | |
| } | |
| /* | |
| ** A wrapper around pwrite(). | |
| */ | |
| static int ts_pwrite(int fd, const void *aBuf, size_t nBuf, off_t off){ | |
| if( tsIsFailErrno("pwrite") ){ | |
| return -1; | |
| } | |
| return orig_pwrite(fd, aBuf, nBuf, off); | |
| } | |
| /* | |
| ** A wrapper around pwrite64(). | |
| */ | |
| static int ts_pwrite64(int fd, const void *aBuf, size_t nBuf, sqlite3_uint64 off){ | |
| if( tsIsFailErrno("pwrite64") ){ | |
| return -1; | |
| } | |
| return orig_pwrite64(fd, aBuf, nBuf, off); | |
| } | |
| /* | |
| ** A wrapper around fchmod(). | |
| */ | |
| static int ts_fchmod(int fd, mode_t mode){ | |
| if( tsIsFail() ){ | |
| return -1; | |
| } | |
| return orig_fchmod(fd, mode); | |
| } | |
| /* | |
| ** A wrapper around fallocate(). | |
| ** | |
| ** SQLite assumes that the fallocate() function is compatible with | |
| ** posix_fallocate(). According to the Linux man page (2009-09-30): | |
| ** | |
| ** posix_fallocate() returns zero on success, or an error number on | |
| ** failure. Note that errno is not set. | |
| */ | |
| static int ts_fallocate(int fd, off_t off, off_t len){ | |
| if( tsIsFail() ){ | |
| return tsErrno("fallocate"); | |
| } | |
| return orig_fallocate(fd, off, len); | |
| } | |
| static void *ts_mmap( | |
| void *pAddr, | |
| size_t nByte, | |
| int prot, | |
| int flags, | |
| int fd, | |
| off_t iOff | |
| ){ | |
| if( tsIsFailErrno("mmap") ){ | |
| return MAP_FAILED; | |
| } | |
| return orig_mmap(pAddr, nByte, prot, flags, fd, iOff); | |
| } | |
| static void *ts_mremap(void *a, size_t b, size_t c, int d, ...){ | |
| va_list ap; | |
| void *pArg; | |
| if( tsIsFailErrno("mremap") ){ | |
| return MAP_FAILED; | |
| } | |
| va_start(ap, d); | |
| pArg = va_arg(ap, void *); | |
| return orig_mremap(a, b, c, d, pArg); | |
| } | |
| static int SQLITE_TCLAPI test_syscall_install( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs; | |
| int nElem; | |
| int i; | |
| Tcl_Obj **apElem; | |
| if( objc!=3 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, "SYSCALL-LIST"); | |
| return TCL_ERROR; | |
| } | |
| if( Tcl_ListObjGetElements(interp, objv[2], &nElem, &apElem) ){ | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| for(i=0; i<nElem; i++){ | |
| int iCall; | |
| int rc = Tcl_GetIndexFromObjStruct(interp, | |
| apElem[i], aSyscall, sizeof(aSyscall[0]), "system-call", 0, &iCall | |
| ); | |
| if( rc ) return rc; | |
| if( aSyscall[iCall].xOrig==0 ){ | |
| aSyscall[iCall].xOrig = pVfs->xGetSystemCall(pVfs, aSyscall[iCall].zName); | |
| pVfs->xSetSystemCall(pVfs, aSyscall[iCall].zName, aSyscall[iCall].xTest); | |
| } | |
| aSyscall[iCall].custom_errno = aSyscall[iCall].default_errno; | |
| } | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_uninstall( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs; | |
| int i; | |
| if( objc!=2 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, ""); | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| for(i=0; aSyscall[i].zName; i++){ | |
| if( aSyscall[i].xOrig ){ | |
| pVfs->xSetSystemCall(pVfs, aSyscall[i].zName, 0); | |
| aSyscall[i].xOrig = 0; | |
| } | |
| } | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_reset( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs; | |
| int i; | |
| int rc; | |
| if( objc!=2 && objc!=3 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, ""); | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| if( objc==2 ){ | |
| rc = pVfs->xSetSystemCall(pVfs, 0, 0); | |
| for(i=0; aSyscall[i].zName; i++) aSyscall[i].xOrig = 0; | |
| }else{ | |
| int nFunc; | |
| char *zFunc = Tcl_GetStringFromObj(objv[2], &nFunc); | |
| rc = pVfs->xSetSystemCall(pVfs, Tcl_GetString(objv[2]), 0); | |
| for(i=0; rc==SQLITE_OK && aSyscall[i].zName; i++){ | |
| if( strlen(aSyscall[i].zName)!=nFunc ) continue; | |
| if( memcmp(aSyscall[i].zName, zFunc, nFunc) ) continue; | |
| aSyscall[i].xOrig = 0; | |
| } | |
| } | |
| if( rc!=SQLITE_OK ){ | |
| Tcl_SetObjResult(interp, Tcl_NewStringObj(sqlite3ErrName(rc), -1)); | |
| return TCL_ERROR; | |
| } | |
| Tcl_ResetResult(interp); | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_exists( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs; | |
| sqlite3_syscall_ptr x; | |
| if( objc!=3 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, ""); | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| x = pVfs->xGetSystemCall(pVfs, Tcl_GetString(objv[2])); | |
| Tcl_SetObjResult(interp, Tcl_NewBooleanObj(x!=0)); | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_fault( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| int nCount = 0; | |
| int bPersist = 0; | |
| if( objc!=2 && objc!=4 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, "?COUNT PERSIST?"); | |
| return TCL_ERROR; | |
| } | |
| if( objc==4 ){ | |
| if( Tcl_GetIntFromObj(interp, objv[2], &nCount) | |
| || Tcl_GetBooleanFromObj(interp, objv[3], &bPersist) | |
| ){ | |
| return TCL_ERROR; | |
| } | |
| } | |
| Tcl_SetObjResult(interp, Tcl_NewIntObj(gSyscall.nFail)); | |
| gSyscall.nCount = nCount; | |
| gSyscall.bPersist = bPersist; | |
| gSyscall.nFail = 0; | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_errno( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| int iCall; | |
| int iErrno; | |
| int rc; | |
| struct Errno { | |
| const char *z; | |
| int i; | |
| } aErrno[] = { | |
| { "EACCES", EACCES }, | |
| { "EINTR", EINTR }, | |
| { "EIO", EIO }, | |
| { "EOVERFLOW", EOVERFLOW }, | |
| { "ENOMEM", ENOMEM }, | |
| { "EAGAIN", EAGAIN }, | |
| { "ETIMEDOUT", ETIMEDOUT }, | |
| { "EBUSY", EBUSY }, | |
| { "EPERM", EPERM }, | |
| { "EDEADLK", EDEADLK }, | |
| { "ENOLCK", ENOLCK }, | |
| { 0, 0 } | |
| }; | |
| if( objc!=4 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, "SYSCALL ERRNO"); | |
| return TCL_ERROR; | |
| } | |
| rc = Tcl_GetIndexFromObjStruct(interp, | |
| objv[2], aSyscall, sizeof(aSyscall[0]), "system-call", 0, &iCall | |
| ); | |
| if( rc!=TCL_OK ) return rc; | |
| rc = Tcl_GetIndexFromObjStruct(interp, | |
| objv[3], aErrno, sizeof(aErrno[0]), "errno", 0, &iErrno | |
| ); | |
| if( rc!=TCL_OK ) return rc; | |
| aSyscall[iCall].custom_errno = aErrno[iErrno].i; | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_list( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| const char *zSys; | |
| sqlite3_vfs *pVfs; | |
| Tcl_Obj *pList; | |
| if( objc!=2 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, ""); | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| pList = Tcl_NewObj(); | |
| Tcl_IncrRefCount(pList); | |
| for(zSys = pVfs->xNextSystemCall(pVfs, 0); | |
| zSys!=0; | |
| zSys = pVfs->xNextSystemCall(pVfs, zSys) | |
| ){ | |
| Tcl_ListObjAppendElement(interp, pList, Tcl_NewStringObj(zSys, -1)); | |
| } | |
| Tcl_SetObjResult(interp, pList); | |
| Tcl_DecrRefCount(pList); | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_defaultvfs( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs; | |
| if( objc!=2 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, ""); | |
| return TCL_ERROR; | |
| } | |
| pVfs = sqlite3_vfs_find(0); | |
| Tcl_SetObjResult(interp, Tcl_NewStringObj(pVfs->zName, -1)); | |
| return TCL_OK; | |
| } | |
| static int ts_getpagesize(void){ | |
| return gSyscall.pgsz; | |
| } | |
| static int SQLITE_TCLAPI test_syscall_pagesize( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| sqlite3_vfs *pVfs = sqlite3_vfs_find(0); | |
| int pgsz; | |
| if( objc!=3 ){ | |
| Tcl_WrongNumArgs(interp, 2, objv, "PGSZ"); | |
| return TCL_ERROR; | |
| } | |
| if( Tcl_GetIntFromObj(interp, objv[2], &pgsz) ){ | |
| return TCL_ERROR; | |
| } | |
| if( pgsz<0 ){ | |
| if( gSyscall.orig_getpagesize ){ | |
| pVfs->xSetSystemCall(pVfs, "getpagesize", gSyscall.orig_getpagesize); | |
| } | |
| }else{ | |
| if( pgsz<512 || (pgsz & (pgsz-1)) ){ | |
| Tcl_AppendResult(interp, "pgsz out of range", 0); | |
| return TCL_ERROR; | |
| } | |
| gSyscall.orig_getpagesize = pVfs->xGetSystemCall(pVfs, "getpagesize"); | |
| gSyscall.pgsz = pgsz; | |
| pVfs->xSetSystemCall( | |
| pVfs, "getpagesize", (sqlite3_syscall_ptr)ts_getpagesize | |
| ); | |
| } | |
| return TCL_OK; | |
| } | |
| static int SQLITE_TCLAPI test_syscall( | |
| void * clientData, | |
| Tcl_Interp *interp, | |
| int objc, | |
| Tcl_Obj *CONST objv[] | |
| ){ | |
| struct SyscallCmd { | |
| const char *zName; | |
| Tcl_ObjCmdProc *xCmd; | |
| } aCmd[] = { | |
| { "fault", test_syscall_fault }, | |
| { "install", test_syscall_install }, | |
| { "uninstall", test_syscall_uninstall }, | |
| { "reset", test_syscall_reset }, | |
| { "errno", test_syscall_errno }, | |
| { "exists", test_syscall_exists }, | |
| { "list", test_syscall_list }, | |
| { "defaultvfs", test_syscall_defaultvfs }, | |
| { "pagesize", test_syscall_pagesize }, | |
| { 0, 0 } | |
| }; | |
| int iCmd; | |
| int rc; | |
| sqlite3_vfs *pVfs = sqlite3_vfs_find(0); | |
| if( objc<2 ){ | |
| Tcl_WrongNumArgs(interp, 1, objv, "SUB-COMMAND ..."); | |
| return TCL_ERROR; | |
| } | |
| if( pVfs->iVersion<3 || pVfs->xSetSystemCall==0 ){ | |
| Tcl_AppendResult(interp, "VFS does not support xSetSystemCall", 0); | |
| rc = TCL_ERROR; | |
| }else{ | |
| rc = Tcl_GetIndexFromObjStruct(interp, | |
| objv[1], aCmd, sizeof(aCmd[0]), "sub-command", 0, &iCmd | |
| ); | |
| } | |
| if( rc!=TCL_OK ) return rc; | |
| return aCmd[iCmd].xCmd(clientData, interp, objc, objv); | |
| } | |
| int SqlitetestSyscall_Init(Tcl_Interp *interp){ | |
| struct SyscallCmd { | |
| const char *zName; | |
| Tcl_ObjCmdProc *xCmd; | |
| } aCmd[] = { | |
| { "test_syscall", test_syscall}, | |
| }; | |
| int i; | |
| for(i=0; i<sizeof(aCmd)/sizeof(aCmd[0]); i++){ | |
| Tcl_CreateObjCommand(interp, aCmd[i].zName, aCmd[i].xCmd, 0, 0); | |
| } | |
| return TCL_OK; | |
| } | |
| #else | |
| int SqlitetestSyscall_Init(Tcl_Interp *interp){ | |
| return TCL_OK; | |
| } | |
| #endif |