| /* | |
| ** 2007 August 22 | |
| ** | |
| ** The author disclaims copyright to this source code. In place of | |
| ** a legal notice, here is a blessing: | |
| ** | |
| ** May you do good and not evil. | |
| ** May you find forgiveness for yourself and forgive others. | |
| ** May you share freely, never taking more than you give. | |
| ** | |
| ************************************************************************* | |
| ** | |
| ** This file implements a special kind of sqlite3_file object used | |
| ** by SQLite to create journal files if the atomic-write optimization | |
| ** is enabled. | |
| ** | |
| ** The distinctive characteristic of this sqlite3_file is that the | |
| ** actual on disk file is created lazily. When the file is created, | |
| ** the caller specifies a buffer size for an in-memory buffer to | |
| ** be used to service read() and write() requests. The actual file | |
| ** on disk is not created or populated until either: | |
| ** | |
| ** 1) The in-memory representation grows too large for the allocated | |
| ** buffer, or | |
| ** 2) The sqlite3JournalCreate() function is called. | |
| */ | |
| #ifdef SQLITE_ENABLE_ATOMIC_WRITE | |
| #include "sqliteInt.h" | |
| /* | |
| ** A JournalFile object is a subclass of sqlite3_file used by | |
| ** as an open file handle for journal files. | |
| */ | |
| struct JournalFile { | |
| sqlite3_io_methods *pMethod; /* I/O methods on journal files */ | |
| int nBuf; /* Size of zBuf[] in bytes */ | |
| char *zBuf; /* Space to buffer journal writes */ | |
| int iSize; /* Amount of zBuf[] currently used */ | |
| int flags; /* xOpen flags */ | |
| sqlite3_vfs *pVfs; /* The "real" underlying VFS */ | |
| sqlite3_file *pReal; /* The "real" underlying file descriptor */ | |
| const char *zJournal; /* Name of the journal file */ | |
| }; | |
| typedef struct JournalFile JournalFile; | |
| /* | |
| ** If it does not already exists, create and populate the on-disk file | |
| ** for JournalFile p. | |
| */ | |
| static int createFile(JournalFile *p){ | |
| int rc = SQLITE_OK; | |
| if( !p->pReal ){ | |
| sqlite3_file *pReal = (sqlite3_file *)&p[1]; | |
| rc = sqlite3OsOpen(p->pVfs, p->zJournal, pReal, p->flags, 0); | |
| if( rc==SQLITE_OK ){ | |
| p->pReal = pReal; | |
| if( p->iSize>0 ){ | |
| assert(p->iSize<=p->nBuf); | |
| rc = sqlite3OsWrite(p->pReal, p->zBuf, p->iSize, 0); | |
| } | |
| } | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Close the file. | |
| */ | |
| static int jrnlClose(sqlite3_file *pJfd){ | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( p->pReal ){ | |
| sqlite3OsClose(p->pReal); | |
| } | |
| sqlite3_free(p->zBuf); | |
| return SQLITE_OK; | |
| } | |
| /* | |
| ** Read data from the file. | |
| */ | |
| static int jrnlRead( | |
| sqlite3_file *pJfd, /* The journal file from which to read */ | |
| void *zBuf, /* Put the results here */ | |
| int iAmt, /* Number of bytes to read */ | |
| sqlite_int64 iOfst /* Begin reading at this offset */ | |
| ){ | |
| int rc = SQLITE_OK; | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( p->pReal ){ | |
| rc = sqlite3OsRead(p->pReal, zBuf, iAmt, iOfst); | |
| }else if( (iAmt+iOfst)>p->iSize ){ | |
| rc = SQLITE_IOERR_SHORT_READ; | |
| }else{ | |
| memcpy(zBuf, &p->zBuf[iOfst], iAmt); | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Write data to the file. | |
| */ | |
| static int jrnlWrite( | |
| sqlite3_file *pJfd, /* The journal file into which to write */ | |
| const void *zBuf, /* Take data to be written from here */ | |
| int iAmt, /* Number of bytes to write */ | |
| sqlite_int64 iOfst /* Begin writing at this offset into the file */ | |
| ){ | |
| int rc = SQLITE_OK; | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( !p->pReal && (iOfst+iAmt)>p->nBuf ){ | |
| rc = createFile(p); | |
| } | |
| if( rc==SQLITE_OK ){ | |
| if( p->pReal ){ | |
| rc = sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst); | |
| }else{ | |
| memcpy(&p->zBuf[iOfst], zBuf, iAmt); | |
| if( p->iSize<(iOfst+iAmt) ){ | |
| p->iSize = (iOfst+iAmt); | |
| } | |
| } | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Truncate the file. | |
| */ | |
| static int jrnlTruncate(sqlite3_file *pJfd, sqlite_int64 size){ | |
| int rc = SQLITE_OK; | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( p->pReal ){ | |
| rc = sqlite3OsTruncate(p->pReal, size); | |
| }else if( size<p->iSize ){ | |
| p->iSize = size; | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Sync the file. | |
| */ | |
| static int jrnlSync(sqlite3_file *pJfd, int flags){ | |
| int rc; | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( p->pReal ){ | |
| rc = sqlite3OsSync(p->pReal, flags); | |
| }else{ | |
| rc = SQLITE_OK; | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Query the size of the file in bytes. | |
| */ | |
| static int jrnlFileSize(sqlite3_file *pJfd, sqlite_int64 *pSize){ | |
| int rc = SQLITE_OK; | |
| JournalFile *p = (JournalFile *)pJfd; | |
| if( p->pReal ){ | |
| rc = sqlite3OsFileSize(p->pReal, pSize); | |
| }else{ | |
| *pSize = (sqlite_int64) p->iSize; | |
| } | |
| return rc; | |
| } | |
| /* | |
| ** Table of methods for JournalFile sqlite3_file object. | |
| */ | |
| static struct sqlite3_io_methods JournalFileMethods = { | |
| 1, /* iVersion */ | |
| jrnlClose, /* xClose */ | |
| jrnlRead, /* xRead */ | |
| jrnlWrite, /* xWrite */ | |
| jrnlTruncate, /* xTruncate */ | |
| jrnlSync, /* xSync */ | |
| jrnlFileSize, /* xFileSize */ | |
| 0, /* xLock */ | |
| 0, /* xUnlock */ | |
| 0, /* xCheckReservedLock */ | |
| 0, /* xFileControl */ | |
| 0, /* xSectorSize */ | |
| 0, /* xDeviceCharacteristics */ | |
| 0, /* xShmMap */ | |
| 0, /* xShmLock */ | |
| 0, /* xShmBarrier */ | |
| 0 /* xShmUnmap */ | |
| }; | |
| /* | |
| ** Open a journal file. | |
| */ | |
| int sqlite3JournalOpen( | |
| sqlite3_vfs *pVfs, /* The VFS to use for actual file I/O */ | |
| const char *zName, /* Name of the journal file */ | |
| sqlite3_file *pJfd, /* Preallocated, blank file handle */ | |
| int flags, /* Opening flags */ | |
| int nBuf /* Bytes buffered before opening the file */ | |
| ){ | |
| JournalFile *p = (JournalFile *)pJfd; | |
| memset(p, 0, sqlite3JournalSize(pVfs)); | |
| if( nBuf>0 ){ | |
| p->zBuf = sqlite3MallocZero(nBuf); | |
| if( !p->zBuf ){ | |
| return SQLITE_NOMEM; | |
| } | |
| }else{ | |
| return sqlite3OsOpen(pVfs, zName, pJfd, flags, 0); | |
| } | |
| p->pMethod = &JournalFileMethods; | |
| p->nBuf = nBuf; | |
| p->flags = flags; | |
| p->zJournal = zName; | |
| p->pVfs = pVfs; | |
| return SQLITE_OK; | |
| } | |
| /* | |
| ** If the argument p points to a JournalFile structure, and the underlying | |
| ** file has not yet been created, create it now. | |
| */ | |
| int sqlite3JournalCreate(sqlite3_file *p){ | |
| if( p->pMethods!=&JournalFileMethods ){ | |
| return SQLITE_OK; | |
| } | |
| return createFile((JournalFile *)p); | |
| } | |
| /* | |
| ** Return the number of bytes required to store a JournalFile that uses vfs | |
| ** pVfs to create the underlying on-disk files. | |
| */ | |
| int sqlite3JournalSize(sqlite3_vfs *pVfs){ | |
| return (pVfs->szOsFile+sizeof(JournalFile)); | |
| } | |
| #endif |