| /* |
| ** 2001 September 15 |
| ** |
| ** The author disclaims copyright to this source code. In place of |
| ** a legal notice, here is a blessing: |
| ** |
| ** May you do good and not evil. |
| ** May you find forgiveness for yourself and forgive others. |
| ** May you share freely, never taking more than you give. |
| ** |
| ************************************************************************* |
| ** This file contains C code routines that are called by the parser |
| ** to handle UPDATE statements. |
| */ |
| #include "sqliteInt.h" |
| |
| #ifndef SQLITE_OMIT_VIRTUALTABLE |
| /* Forward declaration */ |
| static void updateVirtualTable( |
| Parse *pParse, /* The parsing context */ |
| SrcList *pSrc, /* The virtual table to be modified */ |
| Table *pTab, /* The virtual table */ |
| ExprList *pChanges, /* The columns to change in the UPDATE statement */ |
| Expr *pRowidExpr, /* Expression used to recompute the rowid */ |
| int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ |
| Expr *pWhere, /* WHERE clause of the UPDATE statement */ |
| int onError /* ON CONFLICT strategy */ |
| ); |
| #endif /* SQLITE_OMIT_VIRTUALTABLE */ |
| |
| /* |
| ** The most recently coded instruction was an OP_Column to retrieve the |
| ** i-th column of table pTab. This routine sets the P4 parameter of the |
| ** OP_Column to the default value, if any. |
| ** |
| ** The default value of a column is specified by a DEFAULT clause in the |
| ** column definition. This was either supplied by the user when the table |
| ** was created, or added later to the table definition by an ALTER TABLE |
| ** command. If the latter, then the row-records in the table btree on disk |
| ** may not contain a value for the column and the default value, taken |
| ** from the P4 parameter of the OP_Column instruction, is returned instead. |
| ** If the former, then all row-records are guaranteed to include a value |
| ** for the column and the P4 value is not required. |
| ** |
| ** Column definitions created by an ALTER TABLE command may only have |
| ** literal default values specified: a number, null or a string. (If a more |
| ** complicated default expression value was provided, it is evaluated |
| ** when the ALTER TABLE is executed and one of the literal values written |
| ** into the sqlite_master table.) |
| ** |
| ** Therefore, the P4 parameter is only required if the default value for |
| ** the column is a literal number, string or null. The sqlite3ValueFromExpr() |
| ** function is capable of transforming these types of expressions into |
| ** sqlite3_value objects. |
| ** |
| ** If parameter iReg is not negative, code an OP_RealAffinity instruction |
| ** on register iReg. This is used when an equivalent integer value is |
| ** stored in place of an 8-byte floating point value in order to save |
| ** space. |
| */ |
| void sqlite3ColumnDefault(Vdbe *v, Table *pTab, int i, int iReg){ |
| assert( pTab!=0 ); |
| if( !pTab->pSelect ){ |
| sqlite3_value *pValue = 0; |
| u8 enc = ENC(sqlite3VdbeDb(v)); |
| Column *pCol = &pTab->aCol[i]; |
| VdbeComment((v, "%s.%s", pTab->zName, pCol->zName)); |
| assert( i<pTab->nCol ); |
| sqlite3ValueFromExpr(sqlite3VdbeDb(v), pCol->pDflt, enc, |
| pCol->affinity, &pValue); |
| if( pValue ){ |
| sqlite3VdbeAppendP4(v, pValue, P4_MEM); |
| } |
| #ifndef SQLITE_OMIT_FLOATING_POINT |
| if( pTab->aCol[i].affinity==SQLITE_AFF_REAL ){ |
| sqlite3VdbeAddOp1(v, OP_RealAffinity, iReg); |
| } |
| #endif |
| } |
| } |
| |
| /* |
| ** Process an UPDATE statement. |
| ** |
| ** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL; |
| ** \_______/ \________/ \______/ \________________/ |
| * onError pTabList pChanges pWhere |
| */ |
| void sqlite3Update( |
| Parse *pParse, /* The parser context */ |
| SrcList *pTabList, /* The table in which we should change things */ |
| ExprList *pChanges, /* Things to be changed */ |
| Expr *pWhere, /* The WHERE clause. May be null */ |
| int onError /* How to handle constraint errors */ |
| ){ |
| int i, j; /* Loop counters */ |
| Table *pTab; /* The table to be updated */ |
| int addrTop = 0; /* VDBE instruction address of the start of the loop */ |
| WhereInfo *pWInfo; /* Information about the WHERE clause */ |
| Vdbe *v; /* The virtual database engine */ |
| Index *pIdx; /* For looping over indices */ |
| Index *pPk; /* The PRIMARY KEY index for WITHOUT ROWID tables */ |
| int nIdx; /* Number of indices that need updating */ |
| int iBaseCur; /* Base cursor number */ |
| int iDataCur; /* Cursor for the canonical data btree */ |
| int iIdxCur; /* Cursor for the first index */ |
| sqlite3 *db; /* The database structure */ |
| int *aRegIdx = 0; /* One register assigned to each index to be updated */ |
| int *aXRef = 0; /* aXRef[i] is the index in pChanges->a[] of the |
| ** an expression for the i-th column of the table. |
| ** aXRef[i]==-1 if the i-th column is not changed. */ |
| u8 *aToOpen; /* 1 for tables and indices to be opened */ |
| u8 chngPk; /* PRIMARY KEY changed in a WITHOUT ROWID table */ |
| u8 chngRowid; /* Rowid changed in a normal table */ |
| u8 chngKey; /* Either chngPk or chngRowid */ |
| Expr *pRowidExpr = 0; /* Expression defining the new record number */ |
| AuthContext sContext; /* The authorization context */ |
| NameContext sNC; /* The name-context to resolve expressions in */ |
| int iDb; /* Database containing the table being updated */ |
| int okOnePass; /* True for one-pass algorithm without the FIFO */ |
| int hasFK; /* True if foreign key processing is required */ |
| int labelBreak; /* Jump here to break out of UPDATE loop */ |
| int labelContinue; /* Jump here to continue next step of UPDATE loop */ |
| |
| #ifndef SQLITE_OMIT_TRIGGER |
| int isView; /* True when updating a view (INSTEAD OF trigger) */ |
| Trigger *pTrigger; /* List of triggers on pTab, if required */ |
| int tmask; /* Mask of TRIGGER_BEFORE|TRIGGER_AFTER */ |
| #endif |
| int newmask; /* Mask of NEW.* columns accessed by BEFORE triggers */ |
| int iEph = 0; /* Ephemeral table holding all primary key values */ |
| int nKey = 0; /* Number of elements in regKey for WITHOUT ROWID */ |
| int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */ |
| |
| /* Register Allocations */ |
| int regRowCount = 0; /* A count of rows changed */ |
| int regOldRowid = 0; /* The old rowid */ |
| int regNewRowid = 0; /* The new rowid */ |
| int regNew = 0; /* Content of the NEW.* table in triggers */ |
| int regOld = 0; /* Content of OLD.* table in triggers */ |
| int regRowSet = 0; /* Rowset of rows to be updated */ |
| int regKey = 0; /* composite PRIMARY KEY value */ |
| |
| memset(&sContext, 0, sizeof(sContext)); |
| db = pParse->db; |
| if( pParse->nErr || db->mallocFailed ){ |
| goto update_cleanup; |
| } |
| assert( pTabList->nSrc==1 ); |
| |
| /* Locate the table which we want to update. |
| */ |
| pTab = sqlite3SrcListLookup(pParse, pTabList); |
| if( pTab==0 ) goto update_cleanup; |
| iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); |
| |
| /* Figure out if we have any triggers and if the table being |
| ** updated is a view. |
| */ |
| #ifndef SQLITE_OMIT_TRIGGER |
| pTrigger = sqlite3TriggersExist(pParse, pTab, TK_UPDATE, pChanges, &tmask); |
| isView = pTab->pSelect!=0; |
| assert( pTrigger || tmask==0 ); |
| #else |
| # define pTrigger 0 |
| # define isView 0 |
| # define tmask 0 |
| #endif |
| #ifdef SQLITE_OMIT_VIEW |
| # undef isView |
| # define isView 0 |
| #endif |
| |
| if( sqlite3ViewGetColumnNames(pParse, pTab) ){ |
| goto update_cleanup; |
| } |
| if( sqlite3IsReadOnly(pParse, pTab, tmask) ){ |
| goto update_cleanup; |
| } |
| |
| /* Allocate a cursors for the main database table and for all indices. |
| ** The index cursors might not be used, but if they are used they |
| ** need to occur right after the database cursor. So go ahead and |
| ** allocate enough space, just in case. |
| */ |
| pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++; |
| iIdxCur = iDataCur+1; |
| pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); |
| for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ |
| if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){ |
| iDataCur = pParse->nTab; |
| pTabList->a[0].iCursor = iDataCur; |
| } |
| pParse->nTab++; |
| } |
| |
| /* Allocate space for aXRef[], aRegIdx[], and aToOpen[]. |
| ** Initialize aXRef[] and aToOpen[] to their default values. |
| */ |
| aXRef = sqlite3DbMallocRawNN(db, sizeof(int) * (pTab->nCol+nIdx) + nIdx+2 ); |
| if( aXRef==0 ) goto update_cleanup; |
| aRegIdx = aXRef+pTab->nCol; |
| aToOpen = (u8*)(aRegIdx+nIdx); |
| memset(aToOpen, 1, nIdx+1); |
| aToOpen[nIdx+1] = 0; |
| for(i=0; i<pTab->nCol; i++) aXRef[i] = -1; |
| |
| /* Initialize the name-context */ |
| memset(&sNC, 0, sizeof(sNC)); |
| sNC.pParse = pParse; |
| sNC.pSrcList = pTabList; |
| |
| /* Resolve the column names in all the expressions of the |
| ** of the UPDATE statement. Also find the column index |
| ** for each column to be updated in the pChanges array. For each |
| ** column to be updated, make sure we have authorization to change |
| ** that column. |
| */ |
| chngRowid = chngPk = 0; |
| for(i=0; i<pChanges->nExpr; i++){ |
| if( sqlite3ResolveExprNames(&sNC, pChanges->a[i].pExpr) ){ |
| goto update_cleanup; |
| } |
| for(j=0; j<pTab->nCol; j++){ |
| if( sqlite3StrICmp(pTab->aCol[j].zName, pChanges->a[i].zName)==0 ){ |
| if( j==pTab->iPKey ){ |
| chngRowid = 1; |
| pRowidExpr = pChanges->a[i].pExpr; |
| }else if( pPk && (pTab->aCol[j].colFlags & COLFLAG_PRIMKEY)!=0 ){ |
| chngPk = 1; |
| } |
| aXRef[j] = i; |
| break; |
| } |
| } |
| if( j>=pTab->nCol ){ |
| if( pPk==0 && sqlite3IsRowid(pChanges->a[i].zName) ){ |
| j = -1; |
| chngRowid = 1; |
| pRowidExpr = pChanges->a[i].pExpr; |
| }else{ |
| sqlite3ErrorMsg(pParse, "no such column: %s", pChanges->a[i].zName); |
| pParse->checkSchema = 1; |
| goto update_cleanup; |
| } |
| } |
| #ifndef SQLITE_OMIT_AUTHORIZATION |
| { |
| int rc; |
| rc = sqlite3AuthCheck(pParse, SQLITE_UPDATE, pTab->zName, |
| j<0 ? "ROWID" : pTab->aCol[j].zName, |
| db->aDb[iDb].zDbSName); |
| if( rc==SQLITE_DENY ){ |
| goto update_cleanup; |
| }else if( rc==SQLITE_IGNORE ){ |
| aXRef[j] = -1; |
| } |
| } |
| #endif |
| } |
| assert( (chngRowid & chngPk)==0 ); |
| assert( chngRowid==0 || chngRowid==1 ); |
| assert( chngPk==0 || chngPk==1 ); |
| chngKey = chngRowid + chngPk; |
| |
| /* The SET expressions are not actually used inside the WHERE loop. |
| ** So reset the colUsed mask. Unless this is a virtual table. In that |
| ** case, set all bits of the colUsed mask (to ensure that the virtual |
| ** table implementation makes all columns available). |
| */ |
| pTabList->a[0].colUsed = IsVirtual(pTab) ? ALLBITS : 0; |
| |
| hasFK = sqlite3FkRequired(pParse, pTab, aXRef, chngKey); |
| |
| /* There is one entry in the aRegIdx[] array for each index on the table |
| ** being updated. Fill in aRegIdx[] with a register number that will hold |
| ** the key for accessing each index. |
| ** |
| ** FIXME: Be smarter about omitting indexes that use expressions. |
| */ |
| for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ |
| int reg; |
| if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){ |
| reg = ++pParse->nMem; |
| pParse->nMem += pIdx->nColumn; |
| }else{ |
| reg = 0; |
| for(i=0; i<pIdx->nKeyCol; i++){ |
| i16 iIdxCol = pIdx->aiColumn[i]; |
| if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){ |
| reg = ++pParse->nMem; |
| pParse->nMem += pIdx->nColumn; |
| break; |
| } |
| } |
| } |
| if( reg==0 ) aToOpen[j+1] = 0; |
| aRegIdx[j] = reg; |
| } |
| |
| /* Begin generating code. */ |
| v = sqlite3GetVdbe(pParse); |
| if( v==0 ) goto update_cleanup; |
| if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); |
| sqlite3BeginWriteOperation(pParse, 1, iDb); |
| |
| /* Allocate required registers. */ |
| if( !IsVirtual(pTab) ){ |
| regRowSet = ++pParse->nMem; |
| regOldRowid = regNewRowid = ++pParse->nMem; |
| if( chngPk || pTrigger || hasFK ){ |
| regOld = pParse->nMem + 1; |
| pParse->nMem += pTab->nCol; |
| } |
| if( chngKey || pTrigger || hasFK ){ |
| regNewRowid = ++pParse->nMem; |
| } |
| regNew = pParse->nMem + 1; |
| pParse->nMem += pTab->nCol; |
| } |
| |
| /* Start the view context. */ |
| if( isView ){ |
| sqlite3AuthContextPush(pParse, &sContext, pTab->zName); |
| } |
| |
| /* If we are trying to update a view, realize that view into |
| ** an ephemeral table. |
| */ |
| #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) |
| if( isView ){ |
| sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur); |
| } |
| #endif |
| |
| /* Resolve the column names in all the expressions in the |
| ** WHERE clause. |
| */ |
| if( sqlite3ResolveExprNames(&sNC, pWhere) ){ |
| goto update_cleanup; |
| } |
| |
| #ifndef SQLITE_OMIT_VIRTUALTABLE |
| /* Virtual tables must be handled separately */ |
| if( IsVirtual(pTab) ){ |
| updateVirtualTable(pParse, pTabList, pTab, pChanges, pRowidExpr, aXRef, |
| pWhere, onError); |
| goto update_cleanup; |
| } |
| #endif |
| |
| /* Begin the database scan |
| */ |
| if( HasRowid(pTab) ){ |
| sqlite3VdbeAddOp3(v, OP_Null, 0, regRowSet, regOldRowid); |
| pWInfo = sqlite3WhereBegin( |
| pParse, pTabList, pWhere, 0, 0, |
| WHERE_ONEPASS_DESIRED | WHERE_SEEK_TABLE, iIdxCur |
| ); |
| if( pWInfo==0 ) goto update_cleanup; |
| okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); |
| |
| /* Remember the rowid of every item to be updated. |
| */ |
| sqlite3VdbeAddOp2(v, OP_Rowid, iDataCur, regOldRowid); |
| if( !okOnePass ){ |
| sqlite3VdbeAddOp2(v, OP_RowSetAdd, regRowSet, regOldRowid); |
| } |
| |
| /* End the database scan loop. |
| */ |
| sqlite3WhereEnd(pWInfo); |
| }else{ |
| int iPk; /* First of nPk memory cells holding PRIMARY KEY value */ |
| i16 nPk; /* Number of components of the PRIMARY KEY */ |
| int addrOpen; /* Address of the OpenEphemeral instruction */ |
| |
| assert( pPk!=0 ); |
| nPk = pPk->nKeyCol; |
| iPk = pParse->nMem+1; |
| pParse->nMem += nPk; |
| regKey = ++pParse->nMem; |
| iEph = pParse->nTab++; |
| sqlite3VdbeAddOp2(v, OP_Null, 0, iPk); |
| addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); |
| sqlite3VdbeSetP4KeyInfo(pParse, pPk); |
| pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, |
| WHERE_ONEPASS_DESIRED, iIdxCur); |
| if( pWInfo==0 ) goto update_cleanup; |
| okOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); |
| for(i=0; i<nPk; i++){ |
| assert( pPk->aiColumn[i]>=0 ); |
| sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, pPk->aiColumn[i], |
| iPk+i); |
| } |
| if( okOnePass ){ |
| sqlite3VdbeChangeToNoop(v, addrOpen); |
| nKey = nPk; |
| regKey = iPk; |
| }else{ |
| sqlite3VdbeAddOp4(v, OP_MakeRecord, iPk, nPk, regKey, |
| sqlite3IndexAffinityStr(db, pPk), nPk); |
| sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEph, regKey, iPk, nPk); |
| } |
| sqlite3WhereEnd(pWInfo); |
| } |
| |
| /* Initialize the count of updated rows |
| */ |
| if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){ |
| regRowCount = ++pParse->nMem; |
| sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); |
| } |
| |
| labelBreak = sqlite3VdbeMakeLabel(v); |
| if( !isView ){ |
| /* |
| ** Open every index that needs updating. Note that if any |
| ** index could potentially invoke a REPLACE conflict resolution |
| ** action, then we need to open all indices because we might need |
| ** to be deleting some records. |
| */ |
| if( onError==OE_Replace ){ |
| memset(aToOpen, 1, nIdx+1); |
| }else{ |
| for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ |
| if( pIdx->onError==OE_Replace ){ |
| memset(aToOpen, 1, nIdx+1); |
| break; |
| } |
| } |
| } |
| if( okOnePass ){ |
| if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; |
| if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; |
| } |
| sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen, |
| 0, 0); |
| } |
| |
| /* Top of the update loop */ |
| if( okOnePass ){ |
| if( aToOpen[iDataCur-iBaseCur] && !isView ){ |
| assert( pPk ); |
| sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey); |
| VdbeCoverageNeverTaken(v); |
| } |
| labelContinue = labelBreak; |
| sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); |
| VdbeCoverageIf(v, pPk==0); |
| VdbeCoverageIf(v, pPk!=0); |
| }else if( pPk ){ |
| labelContinue = sqlite3VdbeMakeLabel(v); |
| sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); |
| addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); |
| sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); |
| VdbeCoverage(v); |
| }else{ |
| labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak, |
| regOldRowid); |
| VdbeCoverage(v); |
| sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); |
| VdbeCoverage(v); |
| } |
| |
| /* If the record number will change, set register regNewRowid to |
| ** contain the new value. If the record number is not being modified, |
| ** then regNewRowid is the same register as regOldRowid, which is |
| ** already populated. */ |
| assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid ); |
| if( chngRowid ){ |
| sqlite3ExprCode(pParse, pRowidExpr, regNewRowid); |
| sqlite3VdbeAddOp1(v, OP_MustBeInt, regNewRowid); VdbeCoverage(v); |
| } |
| |
| /* Compute the old pre-UPDATE content of the row being changed, if that |
| ** information is needed */ |
| if( chngPk || hasFK || pTrigger ){ |
| u32 oldmask = (hasFK ? sqlite3FkOldmask(pParse, pTab) : 0); |
| oldmask |= sqlite3TriggerColmask(pParse, |
| pTrigger, pChanges, 0, TRIGGER_BEFORE|TRIGGER_AFTER, pTab, onError |
| ); |
| for(i=0; i<pTab->nCol; i++){ |
| if( oldmask==0xffffffff |
| || (i<32 && (oldmask & MASKBIT32(i))!=0) |
| || (pTab->aCol[i].colFlags & COLFLAG_PRIMKEY)!=0 |
| ){ |
| testcase( oldmask!=0xffffffff && i==31 ); |
| sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regOld+i); |
| }else{ |
| sqlite3VdbeAddOp2(v, OP_Null, 0, regOld+i); |
| } |
| } |
| if( chngRowid==0 && pPk==0 ){ |
| sqlite3VdbeAddOp2(v, OP_Copy, regOldRowid, regNewRowid); |
| } |
| } |
| |
| /* Populate the array of registers beginning at regNew with the new |
| ** row data. This array is used to check constants, create the new |
| ** table and index records, and as the values for any new.* references |
| ** made by triggers. |
| ** |
| ** If there are one or more BEFORE triggers, then do not populate the |
| ** registers associated with columns that are (a) not modified by |
| ** this UPDATE statement and (b) not accessed by new.* references. The |
| ** values for registers not modified by the UPDATE must be reloaded from |
| ** the database after the BEFORE triggers are fired anyway (as the trigger |
| ** may have modified them). So not loading those that are not going to |
| ** be used eliminates some redundant opcodes. |
| */ |
| newmask = sqlite3TriggerColmask( |
| pParse, pTrigger, pChanges, 1, TRIGGER_BEFORE, pTab, onError |
| ); |
| for(i=0; i<pTab->nCol; i++){ |
| if( i==pTab->iPKey ){ |
| sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); |
| }else{ |
| j = aXRef[i]; |
| if( j>=0 ){ |
| sqlite3ExprCode(pParse, pChanges->a[j].pExpr, regNew+i); |
| }else if( 0==(tmask&TRIGGER_BEFORE) || i>31 || (newmask & MASKBIT32(i)) ){ |
| /* This branch loads the value of a column that will not be changed |
| ** into a register. This is done if there are no BEFORE triggers, or |
| ** if there are one or more BEFORE triggers that use this value via |
| ** a new.* reference in a trigger program. |
| */ |
| testcase( i==31 ); |
| testcase( i==32 ); |
| sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i); |
| }else{ |
| sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); |
| } |
| } |
| } |
| |
| /* Fire any BEFORE UPDATE triggers. This happens before constraints are |
| ** verified. One could argue that this is wrong. |
| */ |
| if( tmask&TRIGGER_BEFORE ){ |
| sqlite3TableAffinity(v, pTab, regNew); |
| sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, |
| TRIGGER_BEFORE, pTab, regOldRowid, onError, labelContinue); |
| |
| /* The row-trigger may have deleted the row being updated. In this |
| ** case, jump to the next row. No updates or AFTER triggers are |
| ** required. This behavior - what happens when the row being updated |
| ** is deleted or renamed by a BEFORE trigger - is left undefined in the |
| ** documentation. |
| */ |
| if( pPk ){ |
| sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue,regKey,nKey); |
| VdbeCoverage(v); |
| }else{ |
| sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); |
| VdbeCoverage(v); |
| } |
| |
| /* If it did not delete it, the row-trigger may still have modified |
| ** some of the columns of the row being updated. Load the values for |
| ** all columns not modified by the update statement into their |
| ** registers in case this has happened. |
| */ |
| for(i=0; i<pTab->nCol; i++){ |
| if( aXRef[i]<0 && i!=pTab->iPKey ){ |
| sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); |
| } |
| } |
| } |
| |
| if( !isView ){ |
| int addr1 = 0; /* Address of jump instruction */ |
| int bReplace = 0; /* True if REPLACE conflict resolution might happen */ |
| |
| /* Do constraint checks. */ |
| assert( regOldRowid>0 ); |
| sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, |
| regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace, |
| aXRef); |
| |
| /* Do FK constraint checks. */ |
| if( hasFK ){ |
| sqlite3FkCheck(pParse, pTab, regOldRowid, 0, aXRef, chngKey); |
| } |
| |
| /* Delete the index entries associated with the current record. */ |
| if( bReplace || chngKey ){ |
| if( pPk ){ |
| addr1 = sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, 0, regKey, nKey); |
| }else{ |
| addr1 = sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, 0, regOldRowid); |
| } |
| VdbeCoverageNeverTaken(v); |
| } |
| sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur, aRegIdx, -1); |
| |
| /* If changing the rowid value, or if there are foreign key constraints |
| ** to process, delete the old record. Otherwise, add a noop OP_Delete |
| ** to invoke the pre-update hook. |
| ** |
| ** That (regNew==regnewRowid+1) is true is also important for the |
| ** pre-update hook. If the caller invokes preupdate_new(), the returned |
| ** value is copied from memory cell (regNewRowid+1+iCol), where iCol |
| ** is the column index supplied by the user. |
| */ |
| assert( regNew==regNewRowid+1 ); |
| #ifdef SQLITE_ENABLE_PREUPDATE_HOOK |
| sqlite3VdbeAddOp3(v, OP_Delete, iDataCur, |
| OPFLAG_ISUPDATE | ((hasFK || chngKey || pPk!=0) ? 0 : OPFLAG_ISNOOP), |
| regNewRowid |
| ); |
| if( !pParse->nested ){ |
| sqlite3VdbeAppendP4(v, pTab, P4_TABLE); |
| } |
| #else |
| if( hasFK || chngKey || pPk!=0 ){ |
| sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0); |
| } |
| #endif |
| if( bReplace || chngKey ){ |
| sqlite3VdbeJumpHere(v, addr1); |
| } |
| |
| if( hasFK ){ |
| sqlite3FkCheck(pParse, pTab, 0, regNewRowid, aXRef, chngKey); |
| } |
| |
| /* Insert the new index entries and the new record. */ |
| sqlite3CompleteInsertion(pParse, pTab, iDataCur, iIdxCur, |
| regNewRowid, aRegIdx, 1, 0, 0); |
| |
| /* Do any ON CASCADE, SET NULL or SET DEFAULT operations required to |
| ** handle rows (possibly in other tables) that refer via a foreign key |
| ** to the row just updated. */ |
| if( hasFK ){ |
| sqlite3FkActions(pParse, pTab, pChanges, regOldRowid, aXRef, chngKey); |
| } |
| } |
| |
| /* Increment the row counter |
| */ |
| if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){ |
| sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); |
| } |
| |
| sqlite3CodeRowTrigger(pParse, pTrigger, TK_UPDATE, pChanges, |
| TRIGGER_AFTER, pTab, regOldRowid, onError, labelContinue); |
| |
| /* Repeat the above with the next record to be updated, until |
| ** all record selected by the WHERE clause have been updated. |
| */ |
| if( okOnePass ){ |
| /* Nothing to do at end-of-loop for a single-pass */ |
| }else if( pPk ){ |
| sqlite3VdbeResolveLabel(v, labelContinue); |
| sqlite3VdbeAddOp2(v, OP_Next, iEph, addrTop); VdbeCoverage(v); |
| }else{ |
| sqlite3VdbeGoto(v, labelContinue); |
| } |
| sqlite3VdbeResolveLabel(v, labelBreak); |
| |
| /* Update the sqlite_sequence table by storing the content of the |
| ** maximum rowid counter values recorded while inserting into |
| ** autoincrement tables. |
| */ |
| if( pParse->nested==0 && pParse->pTriggerTab==0 ){ |
| sqlite3AutoincrementEnd(pParse); |
| } |
| |
| /* |
| ** Return the number of rows that were changed. If this routine is |
| ** generating code because of a call to sqlite3NestedParse(), do not |
| ** invoke the callback function. |
| */ |
| if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){ |
| sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); |
| sqlite3VdbeSetNumCols(v, 1); |
| sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC); |
| } |
| |
| update_cleanup: |
| sqlite3AuthContextPop(&sContext); |
| sqlite3DbFree(db, aXRef); /* Also frees aRegIdx[] and aToOpen[] */ |
| sqlite3SrcListDelete(db, pTabList); |
| sqlite3ExprListDelete(db, pChanges); |
| sqlite3ExprDelete(db, pWhere); |
| return; |
| } |
| /* Make sure "isView" and other macros defined above are undefined. Otherwise |
| ** they may interfere with compilation of other functions in this file |
| ** (or in another file, if this file becomes part of the amalgamation). */ |
| #ifdef isView |
| #undef isView |
| #endif |
| #ifdef pTrigger |
| #undef pTrigger |
| #endif |
| |
| #ifndef SQLITE_OMIT_VIRTUALTABLE |
| /* |
| ** Generate code for an UPDATE of a virtual table. |
| ** |
| ** There are two possible strategies - the default and the special |
| ** "onepass" strategy. Onepass is only used if the virtual table |
| ** implementation indicates that pWhere may match at most one row. |
| ** |
| ** The default strategy is to create an ephemeral table that contains |
| ** for each row to be changed: |
| ** |
| ** (A) The original rowid of that row. |
| ** (B) The revised rowid for the row. |
| ** (C) The content of every column in the row. |
| ** |
| ** Then loop through the contents of this ephemeral table executing a |
| ** VUpdate for each row. When finished, drop the ephemeral table. |
| ** |
| ** The "onepass" strategy does not use an ephemeral table. Instead, it |
| ** stores the same values (A, B and C above) in a register array and |
| ** makes a single invocation of VUpdate. |
| */ |
| static void updateVirtualTable( |
| Parse *pParse, /* The parsing context */ |
| SrcList *pSrc, /* The virtual table to be modified */ |
| Table *pTab, /* The virtual table */ |
| ExprList *pChanges, /* The columns to change in the UPDATE statement */ |
| Expr *pRowid, /* Expression used to recompute the rowid */ |
| int *aXRef, /* Mapping from columns of pTab to entries in pChanges */ |
| Expr *pWhere, /* WHERE clause of the UPDATE statement */ |
| int onError /* ON CONFLICT strategy */ |
| ){ |
| Vdbe *v = pParse->pVdbe; /* Virtual machine under construction */ |
| int ephemTab; /* Table holding the result of the SELECT */ |
| int i; /* Loop counter */ |
| sqlite3 *db = pParse->db; /* Database connection */ |
| const char *pVTab = (const char*)sqlite3GetVTable(db, pTab); |
| WhereInfo *pWInfo; |
| int nArg = 2 + pTab->nCol; /* Number of arguments to VUpdate */ |
| int regArg; /* First register in VUpdate arg array */ |
| int regRec; /* Register in which to assemble record */ |
| int regRowid; /* Register for ephem table rowid */ |
| int iCsr = pSrc->a[0].iCursor; /* Cursor used for virtual table scan */ |
| int aDummy[2]; /* Unused arg for sqlite3WhereOkOnePass() */ |
| int bOnePass; /* True to use onepass strategy */ |
| int addr; /* Address of OP_OpenEphemeral */ |
| |
| /* Allocate nArg registers to martial the arguments to VUpdate. Then |
| ** create and open the ephemeral table in which the records created from |
| ** these arguments will be temporarily stored. */ |
| assert( v ); |
| ephemTab = pParse->nTab++; |
| addr= sqlite3VdbeAddOp2(v, OP_OpenEphemeral, ephemTab, nArg); |
| regArg = pParse->nMem + 1; |
| pParse->nMem += nArg; |
| regRec = ++pParse->nMem; |
| regRowid = ++pParse->nMem; |
| |
| /* Start scanning the virtual table */ |
| pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0,0,WHERE_ONEPASS_DESIRED,0); |
| if( pWInfo==0 ) return; |
| |
| /* Populate the argument registers. */ |
| sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg); |
| if( pRowid ){ |
| sqlite3ExprCode(pParse, pRowid, regArg+1); |
| }else{ |
| sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1); |
| } |
| for(i=0; i<pTab->nCol; i++){ |
| if( aXRef[i]>=0 ){ |
| sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i); |
| }else{ |
| sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i); |
| } |
| } |
| |
| bOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy); |
| |
| if( bOnePass ){ |
| /* If using the onepass strategy, no-op out the OP_OpenEphemeral coded |
| ** above. Also, if this is a top-level parse (not a trigger), clear the |
| ** multi-write flag so that the VM does not open a statement journal */ |
| sqlite3VdbeChangeToNoop(v, addr); |
| if( sqlite3IsToplevel(pParse) ){ |
| pParse->isMultiWrite = 0; |
| } |
| }else{ |
| /* Create a record from the argument register contents and insert it into |
| ** the ephemeral table. */ |
| sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec); |
| sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid); |
| sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid); |
| } |
| |
| |
| if( bOnePass==0 ){ |
| /* End the virtual table scan */ |
| sqlite3WhereEnd(pWInfo); |
| |
| /* Begin scannning through the ephemeral table. */ |
| addr = sqlite3VdbeAddOp1(v, OP_Rewind, ephemTab); VdbeCoverage(v); |
| |
| /* Extract arguments from the current row of the ephemeral table and |
| ** invoke the VUpdate method. */ |
| for(i=0; i<nArg; i++){ |
| sqlite3VdbeAddOp3(v, OP_Column, ephemTab, i, regArg+i); |
| } |
| } |
| sqlite3VtabMakeWritable(pParse, pTab); |
| sqlite3VdbeAddOp4(v, OP_VUpdate, 0, nArg, regArg, pVTab, P4_VTAB); |
| sqlite3VdbeChangeP5(v, onError==OE_Default ? OE_Abort : onError); |
| sqlite3MayAbort(pParse); |
| |
| /* End of the ephemeral table scan. Or, if using the onepass strategy, |
| ** jump to here if the scan visited zero rows. */ |
| if( bOnePass==0 ){ |
| sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v); |
| sqlite3VdbeJumpHere(v, addr); |
| sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0); |
| }else{ |
| sqlite3WhereEnd(pWInfo); |
| } |
| } |
| #endif /* SQLITE_OMIT_VIRTUALTABLE */ |