| # 2001-09-15 |
| # |
| # The author disclaims copyright to this source code. In place of |
| # a legal notice, here is a blessing: |
| # |
| # May you do good and not evil. |
| # May you find forgiveness for yourself and forgive others. |
| # May you share freely, never taking more than you give. |
| # |
| #*********************************************************************** |
| # This file implements regression tests for SQLite library. The |
| # focus of this file is testing the INSERT statement. |
| # |
| |
| set testdir [file dirname $argv0] |
| source $testdir/tester.tcl |
| |
| # Try to insert into a non-existant table. |
| # |
| do_test insert-1.1 { |
| set v [catch {execsql {INSERT INTO test1 VALUES(1,2,3)}} msg] |
| lappend v $msg |
| } {1 {no such table: test1}} |
| |
| # Try to insert into sqlite_master |
| # |
| do_test insert-1.2 { |
| set v [catch {execsql {INSERT INTO sqlite_master VALUES(1,2,3,4)}} msg] |
| lappend v $msg |
| } {1 {table sqlite_master may not be modified}} |
| |
| # Try to insert the wrong number of entries. |
| # |
| do_test insert-1.3 { |
| execsql {CREATE TABLE test1(one int, two int, three int)} |
| set v [catch {execsql {INSERT INTO test1 VALUES(1,2)}} msg] |
| lappend v $msg |
| } {1 {table test1 has 3 columns but 2 values were supplied}} |
| do_test insert-1.3b { |
| set v [catch {execsql {INSERT INTO test1 VALUES(1,2,3,4)}} msg] |
| lappend v $msg |
| } {1 {table test1 has 3 columns but 4 values were supplied}} |
| do_test insert-1.3c { |
| set v [catch {execsql {INSERT INTO test1(one,two) VALUES(1,2,3,4)}} msg] |
| lappend v $msg |
| } {1 {4 values for 2 columns}} |
| do_test insert-1.3d { |
| set v [catch {execsql {INSERT INTO test1(one,two) VALUES(1)}} msg] |
| lappend v $msg |
| } {1 {1 values for 2 columns}} |
| |
| # Try to insert into a non-existant column of a table. |
| # |
| do_test insert-1.4 { |
| set v [catch {execsql {INSERT INTO test1(one,four) VALUES(1,2)}} msg] |
| lappend v $msg |
| } {1 {table test1 has no column named four}} |
| |
| # Make sure the inserts actually happen |
| # |
| do_test insert-1.5 { |
| execsql {INSERT INTO test1 VALUES(1,2,3)} |
| execsql {SELECT * FROM test1} |
| } {1 2 3} |
| do_test insert-1.5b { |
| execsql {INSERT INTO test1 VALUES(4,5,6)} |
| execsql {SELECT * FROM test1 ORDER BY one} |
| } {1 2 3 4 5 6} |
| do_test insert-1.5c { |
| execsql {INSERT INTO test1 VALUES(7,8,9)} |
| execsql {SELECT * FROM test1 ORDER BY one} |
| } {1 2 3 4 5 6 7 8 9} |
| |
| do_test insert-1.6 { |
| execsql {DELETE FROM test1} |
| execsql {INSERT INTO test1(one,two) VALUES(1,2)} |
| execsql {SELECT * FROM test1 ORDER BY one} |
| } {1 2 {}} |
| do_test insert-1.6b { |
| execsql {INSERT INTO test1(two,three) VALUES(5,6)} |
| execsql {SELECT * FROM test1 ORDER BY one} |
| } {{} 5 6 1 2 {}} |
| do_test insert-1.6c { |
| execsql {INSERT INTO test1(three,one) VALUES(7,8)} |
| execsql {SELECT * FROM test1 ORDER BY one} |
| } {{} 5 6 1 2 {} 8 {} 7} |
| |
| # A table to use for testing default values |
| # |
| do_test insert-2.1 { |
| execsql { |
| CREATE TABLE test2( |
| f1 int default -111, |
| f2 real default +4.32, |
| f3 int default +222, |
| f4 int default 7.89 |
| ) |
| } |
| execsql {SELECT * from test2} |
| } {} |
| do_test insert-2.2 { |
| execsql {INSERT INTO test2(f1,f3) VALUES(+10,-10)} |
| execsql {SELECT * FROM test2} |
| } {10 4.32 -10 7.89} |
| do_test insert-2.3 { |
| execsql {INSERT INTO test2(f2,f4) VALUES(1.23,-3.45)} |
| execsql {SELECT * FROM test2 WHERE f1==-111} |
| } {-111 1.23 222 -3.45} |
| do_test insert-2.4 { |
| execsql {INSERT INTO test2(f1,f2,f4) VALUES(77,+1.23,3.45)} |
| execsql {SELECT * FROM test2 WHERE f1==77} |
| } {77 1.23 222 3.45} |
| do_test insert-2.10 { |
| execsql { |
| DROP TABLE test2; |
| CREATE TABLE test2( |
| f1 int default 111, |
| f2 real default -4.32, |
| f3 text default hi, |
| f4 text default 'abc-123', |
| f5 varchar(10) |
| ) |
| } |
| execsql {SELECT * from test2} |
| } {} |
| do_test insert-2.11 { |
| execsql {INSERT INTO test2(f2,f4) VALUES(-2.22,'hi!')} |
| execsql {SELECT * FROM test2} |
| } {111 -2.22 hi hi! {}} |
| do_test insert-2.12 { |
| execsql {INSERT INTO test2(f1,f5) VALUES(1,'xyzzy')} |
| execsql {SELECT * FROM test2 ORDER BY f1} |
| } {1 -4.32 hi abc-123 xyzzy 111 -2.22 hi hi! {}} |
| |
| # Do additional inserts with default values, but this time |
| # on a table that has indices. In particular we want to verify |
| # that the correct default values are inserted into the indices. |
| # |
| do_test insert-3.1 { |
| execsql { |
| DELETE FROM test2; |
| CREATE INDEX index9 ON test2(f1,f2); |
| CREATE INDEX indext ON test2(f4,f5); |
| SELECT * from test2; |
| } |
| } {} |
| |
| # Update for sqlite3 v3: |
| # Change the 111 to '111' in the following two test cases, because |
| # the default value is being inserted as a string. TODO: It shouldn't be. |
| do_test insert-3.2 { |
| execsql {INSERT INTO test2(f2,f4) VALUES(-3.33,'hum')} |
| execsql {SELECT * FROM test2 WHERE f1='111' AND f2=-3.33} |
| } {111 -3.33 hi hum {}} |
| do_test insert-3.3 { |
| execsql {INSERT INTO test2(f1,f2,f5) VALUES(22,-4.44,'wham')} |
| execsql {SELECT * FROM test2 WHERE f1='111' AND f2=-3.33} |
| } {111 -3.33 hi hum {}} |
| do_test insert-3.4 { |
| execsql {SELECT * FROM test2 WHERE f1=22 AND f2=-4.44} |
| } {22 -4.44 hi abc-123 wham} |
| ifcapable {reindex} { |
| do_test insert-3.5 { |
| execsql REINDEX |
| } {} |
| } |
| integrity_check insert-3.5 |
| |
| # Test of expressions in the VALUES clause |
| # |
| do_test insert-4.1 { |
| execsql { |
| CREATE TABLE t3(a,b,c); |
| INSERT INTO t3 VALUES(1+2+3,4,5); |
| SELECT * FROM t3; |
| } |
| } {6 4 5} |
| do_test insert-4.2 { |
| ifcapable subquery { |
| execsql {INSERT INTO t3 VALUES((SELECT max(a) FROM t3)+1,5,6);} |
| } else { |
| set maxa [execsql {SELECT max(a) FROM t3}] |
| execsql "INSERT INTO t3 VALUES($maxa+1,5,6);" |
| } |
| execsql { |
| SELECT * FROM t3 ORDER BY a; |
| } |
| } {6 4 5 7 5 6} |
| ifcapable subquery { |
| do_test insert-4.3 { |
| catchsql { |
| INSERT INTO t3 VALUES((SELECT max(a) FROM t3)+1,t3.a,6); |
| SELECT * FROM t3 ORDER BY a; |
| } |
| } {1 {no such column: t3.a}} |
| } |
| do_test insert-4.4 { |
| ifcapable subquery { |
| execsql {INSERT INTO t3 VALUES((SELECT b FROM t3 WHERE a=0),6,7);} |
| } else { |
| set b [execsql {SELECT b FROM t3 WHERE a = 0}] |
| if {$b==""} {set b NULL} |
| execsql "INSERT INTO t3 VALUES($b,6,7);" |
| } |
| execsql { |
| SELECT * FROM t3 ORDER BY a; |
| } |
| } {{} 6 7 6 4 5 7 5 6} |
| do_test insert-4.5 { |
| execsql { |
| SELECT b,c FROM t3 WHERE a IS NULL; |
| } |
| } {6 7} |
| do_test insert-4.6 { |
| catchsql { |
| INSERT INTO t3 VALUES(notafunc(2,3),2,3); |
| } |
| } {1 {no such function: notafunc}} |
| do_test insert-4.7 { |
| execsql { |
| INSERT INTO t3 VALUES(min(1,2,3),max(1,2,3),99); |
| SELECT * FROM t3 WHERE c=99; |
| } |
| } {1 3 99} |
| |
| # Test the ability to insert from a temporary table into itself. |
| # Ticket #275. |
| # |
| ifcapable tempdb { |
| do_test insert-5.1 { |
| execsql { |
| CREATE TEMP TABLE t4(x); |
| INSERT INTO t4 VALUES(1); |
| SELECT * FROM t4; |
| } |
| } {1} |
| do_test insert-5.2 { |
| execsql { |
| INSERT INTO t4 SELECT x+1 FROM t4; |
| SELECT * FROM t4; |
| } |
| } {1 2} |
| ifcapable {explain} { |
| do_test insert-5.3 { |
| # verify that a temporary table is used to copy t4 to t4 |
| set x [execsql { |
| EXPLAIN INSERT INTO t4 SELECT x+2 FROM t4; |
| }] |
| expr {[lsearch $x OpenEphemeral]>0} |
| } {1} |
| } |
| |
| do_test insert-5.4 { |
| # Verify that table "test1" begins on page 3. This should be the same |
| # page number used by "t4" above. |
| # |
| # Update for v3 - the first table now begins on page 2 of each file, not 3. |
| execsql { |
| SELECT rootpage FROM sqlite_master WHERE name='test1'; |
| } |
| } [expr $AUTOVACUUM?3:2] |
| do_test insert-5.5 { |
| # Verify that "t4" begins on page 3. |
| # |
| # Update for v3 - the first table now begins on page 2 of each file, not 3. |
| execsql { |
| SELECT rootpage FROM sqlite_temp_master WHERE name='t4'; |
| } |
| } {2} |
| do_test insert-5.6 { |
| # This should not use an intermediate temporary table. |
| execsql { |
| INSERT INTO t4 SELECT one FROM test1 WHERE three=7; |
| SELECT * FROM t4 |
| } |
| } {1 2 8} |
| ifcapable {explain} { |
| do_test insert-5.7 { |
| # verify that no temporary table is used to copy test1 to t4 |
| set x [execsql { |
| EXPLAIN INSERT INTO t4 SELECT one FROM test1; |
| }] |
| expr {[lsearch $x OpenTemp]>0} |
| } {0} |
| } |
| } |
| |
| # Ticket #334: REPLACE statement corrupting indices. |
| # |
| ifcapable conflict { |
| # The REPLACE command is not available if SQLITE_OMIT_CONFLICT is |
| # defined at compilation time. |
| do_test insert-6.1 { |
| execsql { |
| CREATE TABLE t1(a INTEGER PRIMARY KEY, b UNIQUE); |
| INSERT INTO t1 VALUES(1,2); |
| INSERT INTO t1 VALUES(2,3); |
| SELECT b FROM t1 WHERE b=2; |
| } |
| } {2} |
| do_test insert-6.2 { |
| execsql { |
| REPLACE INTO t1 VALUES(1,4); |
| SELECT b FROM t1 WHERE b=2; |
| } |
| } {} |
| do_test insert-6.3 { |
| execsql { |
| UPDATE OR REPLACE t1 SET a=2 WHERE b=4; |
| SELECT * FROM t1 WHERE b=4; |
| } |
| } {2 4} |
| do_test insert-6.4 { |
| execsql { |
| SELECT * FROM t1 WHERE b=3; |
| } |
| } {} |
| ifcapable {reindex} { |
| do_test insert-6.5 { |
| execsql REINDEX |
| } {} |
| } |
| do_test insert-6.6 { |
| execsql { |
| DROP TABLE t1; |
| } |
| } {} |
| } |
| |
| # Test that the special optimization for queries of the form |
| # "SELECT max(x) FROM tbl" where there is an index on tbl(x) works with |
| # INSERT statments. |
| do_test insert-7.1 { |
| execsql { |
| CREATE TABLE t1(a); |
| INSERT INTO t1 VALUES(1); |
| INSERT INTO t1 VALUES(2); |
| CREATE INDEX i1 ON t1(a); |
| } |
| } {} |
| do_test insert-7.2 { |
| execsql { |
| INSERT INTO t1 SELECT max(a) FROM t1; |
| } |
| } {} |
| do_test insert-7.3 { |
| execsql { |
| SELECT a FROM t1; |
| } |
| } {1 2 2} |
| |
| # Ticket #1140: Check for an infinite loop in the algorithm that tests |
| # to see if the right-hand side of an INSERT...SELECT references the left-hand |
| # side. |
| # |
| ifcapable subquery&&compound { |
| do_test insert-8.1 { |
| execsql { |
| INSERT INTO t3 SELECT * FROM (SELECT * FROM t3 UNION ALL SELECT 1,2,3) |
| } |
| } {} |
| } |
| |
| # Make sure the rowid cache in the VDBE is reset correctly when |
| # an explicit rowid is given. |
| # |
| do_test insert-9.1 { |
| execsql { |
| CREATE TABLE t5(x); |
| INSERT INTO t5 VALUES(1); |
| INSERT INTO t5 VALUES(2); |
| INSERT INTO t5 VALUES(3); |
| INSERT INTO t5(rowid, x) SELECT nullif(x*2+10,14), x+100 FROM t5; |
| SELECT rowid, x FROM t5; |
| } |
| } {1 1 2 2 3 3 12 101 13 102 16 103} |
| do_test insert-9.2 { |
| execsql { |
| CREATE TABLE t6(x INTEGER PRIMARY KEY, y); |
| INSERT INTO t6 VALUES(1,1); |
| INSERT INTO t6 VALUES(2,2); |
| INSERT INTO t6 VALUES(3,3); |
| INSERT INTO t6 SELECT nullif(y*2+10,14), y+100 FROM t6; |
| SELECT x, y FROM t6; |
| } |
| } {1 1 2 2 3 3 12 101 13 102 16 103} |
| |
| # Multiple VALUES clauses |
| # |
| ifcapable compound { |
| do_test insert-10.1 { |
| execsql { |
| CREATE TABLE t10(a,b,c); |
| INSERT INTO t10 VALUES(1,2,3), (4,5,6), (7,8,9); |
| SELECT * FROM t10; |
| } |
| } {1 2 3 4 5 6 7 8 9} |
| do_test insert-10.2 { |
| catchsql { |
| INSERT INTO t10 VALUES(11,12,13), (14,15), (16,17,28); |
| } |
| } {1 {all VALUES must have the same number of terms}} |
| } |
| |
| # Need for the OP_SoftNull opcode |
| # |
| do_execsql_test insert-11.1 { |
| CREATE TABLE t11a AS SELECT '123456789' AS x; |
| CREATE TABLE t11b (a INTEGER PRIMARY KEY, b, c); |
| INSERT INTO t11b SELECT x, x, x FROM t11a; |
| SELECT quote(a), quote(b), quote(c) FROM t11b; |
| } {123456789 '123456789' '123456789'} |
| |
| |
| # More columns of input than there are columns in the table. |
| # Ticket http://www.sqlite.org/src/info/e9654505cfda9361 |
| # |
| do_execsql_test insert-12.1 { |
| CREATE TABLE t12a(a,b,c,d,e,f,g); |
| INSERT INTO t12a VALUES(101,102,103,104,105,106,107); |
| CREATE TABLE t12b(x); |
| INSERT INTO t12b(x,rowid,x,x,x,x,x) SELECT * FROM t12a; |
| SELECT rowid, x FROM t12b; |
| } {102 101} |
| do_execsql_test insert-12.2 { |
| CREATE TABLE tab1( value INTEGER); |
| INSERT INTO tab1 (value, _rowid_) values( 11, 1); |
| INSERT INTO tab1 (value, _rowid_) SELECT 22,999; |
| SELECT * FROM tab1; |
| } {11 22} |
| do_execsql_test insert-12.3 { |
| CREATE TABLE t12c(a, b DEFAULT 'xyzzy', c); |
| INSERT INTO t12c(a, rowid, c) SELECT 'one', 999, 'two'; |
| SELECT * FROM t12c; |
| } {one xyzzy two} |
| |
| # 2018-06-11. From OSSFuzz. A column cache malfunction in |
| # the constraint checking on an index of expressions causes |
| # an assertion fault in a REPLACE. Ticket |
| # https://www.sqlite.org/src/info/c2432ef9089ee73b |
| # |
| do_execsql_test insert-13.1 { |
| DROP TABLE IF EXISTS t13; |
| CREATE TABLE t13(a INTEGER PRIMARY KEY,b UNIQUE); |
| CREATE INDEX t13x1 ON t13(-b=b); |
| INSERT INTO t13 VALUES(1,5),(6,2); |
| REPLACE INTO t13 SELECT b,0 FROM t13; |
| SELECT * FROM t13 ORDER BY +b; |
| } {2 0 6 2 1 5} |
| |
| # 2019-01-17. From the chromium fuzzer. |
| # |
| do_execsql_test insert-14.1 { |
| DROP TABLE IF EXISTS t14; |
| CREATE TABLE t14(x INTEGER PRIMARY KEY); |
| INSERT INTO t14 VALUES(CASE WHEN 1 THEN null END); |
| SELECT x FROM t14; |
| } {1} |
| |
| integrity_check insert-14.2 |
| |
| # 2019-08-12. |
| # |
| do_execsql_test insert-15.1 { |
| DROP TABLE IF EXISTS t1; |
| DROP TABLE IF EXISTS t2; |
| CREATE TABLE t1(a INTEGER PRIMARY KEY, b TEXT); |
| CREATE INDEX i1 ON t1(b); |
| CREATE TABLE t2(a, b); |
| INSERT INTO t2 VALUES(4, randomblob(31000)); |
| INSERT INTO t2 VALUES(4, randomblob(32000)); |
| INSERT INTO t2 VALUES(4, randomblob(33000)); |
| REPLACE INTO t1 SELECT a, b FROM t2; |
| SELECT a, length(b) FROM t1; |
| } {4 33000} |
| |
| # 2019-10-16 |
| # ticket https://www.sqlite.org/src/info/a8a4847a2d96f5de |
| # On a REPLACE INTO, if an AFTER trigger adds back the conflicting |
| # row, you can end up with the wrong number of rows in an index. |
| # |
| db close |
| sqlite3 db :memory: |
| do_catchsql_test insert-16.1 { |
| PRAGMA recursive_triggers = true; |
| CREATE TABLE t0(c0,c1); |
| CREATE UNIQUE INDEX i0 ON t0(c0); |
| INSERT INTO t0(c0,c1) VALUES(123,1); |
| CREATE TRIGGER tr0 AFTER DELETE ON t0 |
| BEGIN |
| INSERT INTO t0 VALUES(123,2); |
| END; |
| REPLACE INTO t0(c0,c1) VALUES(123,3); |
| } {1 {UNIQUE constraint failed: t0.c0}} |
| do_execsql_test insert-16.2 { |
| SELECT * FROM t0; |
| } {123 1} |
| integrity_check insert-16.3 |
| do_catchsql_test insert-16.4 { |
| CREATE TABLE t1(a INTEGER PRIMARY KEY, b); |
| CREATE INDEX t1b ON t1(b); |
| INSERT INTO t1 VALUES(1, 'one'); |
| CREATE TRIGGER tr3 AFTER DELETE ON t1 BEGIN |
| INSERT INTO t1 VALUES(1, 'three'); |
| END; |
| REPLACE INTO t1 VALUES(1, 'two'); |
| } {1 {UNIQUE constraint failed: t1.a}} |
| integrity_check insert-16.5 |
| do_catchsql_test insert-16.6 { |
| PRAGMA foreign_keys = 1; |
| CREATE TABLE p1(a, b UNIQUE); |
| CREATE TABLE c1(c, d REFERENCES p1(b) ON DELETE CASCADE); |
| CREATE TRIGGER tr6 AFTER DELETE ON c1 BEGIN |
| INSERT INTO p1 VALUES(4, 1); |
| END; |
| INSERT INTO p1 VALUES(1, 1); |
| INSERT INTO c1 VALUES(2, 1); |
| REPLACE INTO p1 VALUES(3, 1);2 |
| } {1 {UNIQUE constraint failed: p1.b}} |
| integrity_check insert-16.7 |
| |
| # 2019-10-25 ticket c1e19e12046d23fe |
| do_catchsql_test insert-17.1 { |
| PRAGMA temp.recursive_triggers = true; |
| DROP TABLE IF EXISTS t0; |
| CREATE TABLE t0(aa, bb); |
| CREATE UNIQUE INDEX t0bb ON t0(bb); |
| CREATE TRIGGER "r17.1" BEFORE DELETE ON t0 |
| BEGIN INSERT INTO t0(aa,bb) VALUES(99,1); |
| END; |
| INSERT INTO t0(aa,bb) VALUES(10,20); |
| REPLACE INTO t0(aa,bb) VALUES(30,20); |
| } {1 {UNIQUE constraint failed: t0.rowid}} |
| integrity_check insert-17.2 |
| do_catchsql_test insert-17.3 { |
| DROP TABLE IF EXISTS t1; |
| CREATE TABLE t1(a, b UNIQUE, c UNIQUE); |
| INSERT INTO t1(a,b,c) VALUES(1,1,1),(2,2,2),(3,3,3),(4,4,4); |
| CREATE TRIGGER "r17.3" AFTER DELETE ON t1 WHEN OLD.c<>3 BEGIN |
| INSERT INTO t1(rowid,a,b,c) VALUES(100,100,100,3); |
| END; |
| REPLACE INTO t1(rowid,a,b,c) VALUES(200,1,2,3); |
| } {1 {UNIQUE constraint failed: t1.c}} |
| integrity_check insert-17.4 |
| do_execsql_test insert-17.5 { |
| CREATE TABLE t2(a INTEGER PRIMARY KEY, b); |
| CREATE UNIQUE INDEX t2b ON t2(b); |
| INSERT INTO t2(a,b) VALUES(1,1),(2,2),(3,3),(4,4); |
| CREATE TABLE fire(x); |
| CREATE TRIGGER t2r1 AFTER DELETE ON t2 BEGIN |
| INSERT INTO fire VALUES(old.a); |
| END; |
| UPDATE OR REPLACE t2 SET a=4, b=3 WHERE a=1; |
| SELECT *, 'x' FROM t2 ORDER BY a; |
| } {2 2 x 4 3 x} |
| do_execsql_test insert-17.6 { |
| SELECT x FROM fire ORDER BY x; |
| } {3 4} |
| do_execsql_test insert-17.7 { |
| DELETE FROM t2; |
| DELETE FROM fire; |
| INSERT INTO t2(a,b) VALUES(1,1),(2,2),(3,3),(4,4); |
| UPDATE OR REPLACE t2 SET a=1, b=3 WHERE a=1; |
| SELECT *, 'x' FROM t2 ORDER BY a; |
| } {1 3 x 2 2 x 4 4 x} |
| do_execsql_test insert-17.8 { |
| SELECT x FROM fire ORDER BY x; |
| } {3} |
| do_execsql_test insert-17.10 { |
| CREATE TABLE t3(a INTEGER PRIMARY KEY, b INT, c INT, d INT); |
| CREATE UNIQUE INDEX t3bpi ON t3(b) WHERE c<=d; |
| CREATE UNIQUE INDEX t3d ON t3(d); |
| INSERT INTO t3(a,b,c,d) VALUES(1,1,1,1),(2,1,3,2),(3,4,5,6); |
| CREATE TRIGGER t3r1 AFTER DELETE ON t3 BEGIN |
| SELECT 'hi'; |
| END; |
| REPLACE INTO t3(a,b,c,d) VALUES(4,4,8,9); |
| } {} |
| do_execsql_test insert-17.11 { |
| SELECT *, 'x' FROM t3 ORDER BY a; |
| } {1 1 1 1 x 2 1 3 2 x 4 4 8 9 x} |
| do_execsql_test insert-17.12 { |
| REPLACE INTO t3(a,b,c,d) VALUES(5,1,11,2); |
| SELECT *, 'x' FROM t3 ORDER BY a; |
| } {1 1 1 1 x 4 4 8 9 x 5 1 11 2 x} |
| |
| do_execsql_test insert-17.13 { |
| DELETE FROM t3; |
| INSERT INTO t3(a,b,c,d) VALUES(1,1,1,1),(2,1,3,2),(3,4,5,6); |
| DROP TRIGGER t3r1; |
| CREATE TRIGGER t3r1 AFTER DELETE ON t3 BEGIN |
| INSERT INTO t3(b,c,d) VALUES(old.b,old.c,old.d); |
| END; |
| } {} |
| do_catchsql_test insert-17.14 { |
| REPLACE INTO t3(a,b,c,d) VALUES(4,4,8,9); |
| } {1 {UNIQUE constraint failed: t3.b}} |
| do_catchsql_test insert-17.15 { |
| REPLACE INTO t3(a,b,c,d) VALUES(5,1,11,2); |
| } {1 {UNIQUE constraint failed: t3.d}} |
| |
| |
| finish_test |