blob: a7b27317a3ad37d026b5f611ed55cc7dadcc4880 [file] [log] [blame]
# Copyright 2011 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Variable default definitions. Override them by exporting them in your shell.
CXX ?= "g++" # For distcc: export CXX="distcc g++"
LINK ?= "g++"
OUTDIR ?= out
TESTJOBS ?= -j16
GYPFLAGS ?=
# Special build flags. Use them like this: "make library=shared"
# library=shared || component=shared_library
ifeq ($(library), shared)
GYPFLAGS += -Dcomponent=shared_library
endif
ifdef component
GYPFLAGS += -Dcomponent=$(component)
endif
# console=readline
ifdef console
GYPFLAGS += -Dconsole=$(console)
endif
# disassembler=on
ifeq ($(disassembler), on)
GYPFLAGS += -Dv8_enable_disassembler=1
endif
# snapshot=off
ifeq ($(snapshot), off)
GYPFLAGS += -Dv8_use_snapshot='false'
endif
# gdbjit=on
ifeq ($(gdbjit), on)
GYPFLAGS += -Dv8_enable_gdbjit=1
endif
# liveobjectlist=on
ifeq ($(liveobjectlist), on)
GYPFLAGS += -Dv8_use_liveobjectlist=true
endif
# vfp3=off
ifeq ($(vfp3), off)
GYPFLAGS += -Dv8_can_use_vfp_instructions=false
else
GYPFLAGS += -Dv8_can_use_vfp_instructions=true
endif
# soname_version=1.2.3
ifdef soname_version
GYPFLAGS += -Dsoname_version=$(soname_version)
endif
# ----------------- available targets: --------------------
# - "dependencies": pulls in external dependencies (currently: GYP)
# - any arch listed in ARCHES (see below)
# - any mode listed in MODES
# - every combination <arch>.<mode>, e.g. "ia32.release"
# - any of the above with .check appended, e.g. "ia32.release.check"
# - default (no target specified): build all ARCHES and MODES
# - "check": build all targets and run all tests
# - "<arch>.clean" for any <arch> in ARCHES
# - "clean": clean all ARCHES
# ----------------- internal stuff ------------------------
# Architectures and modes to be compiled. Consider these to be internal
# variables, don't override them (use the targets instead).
ARCHES = ia32 x64 arm
MODES = release debug
# List of files that trigger Makefile regeneration:
GYPFILES = build/all.gyp build/common.gypi build/standalone.gypi \
preparser/preparser.gyp samples/samples.gyp src/d8.gyp \
test/cctest/cctest.gyp tools/gyp/v8.gyp
# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
# Generates corresponding test targets, e.g. "ia32.release.check".
CHECKS = $(addsuffix .check,$(BUILDS))
# File where previously used GYPFLAGS are stored.
ENVFILE = $(OUTDIR)/environment
.PHONY: all check clean dependencies $(ENVFILE).new \
$(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \
$(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES))
# Target definitions. "all" is the default.
all: $(MODES)
# Compile targets. MODES and ARCHES are convenience targets.
.SECONDEXPANSION:
$(MODES): $(addsuffix .$$@,$(ARCHES))
$(ARCHES): $(addprefix $$@.,$(MODES))
# Defines how to build a particular target (e.g. ia32.release).
$(BUILDS): $(OUTDIR)/Makefile-$$(basename $$@)
@$(MAKE) -C "$(OUTDIR)" -f Makefile-$(basename $@) \
CXX="$(CXX)" LINK="$(LINK)" \
BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
python -c "print raw_input().capitalize()") \
builddir="$(shell pwd)/$(OUTDIR)/$@"
# Test targets.
check: all
@tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR)
$(addsuffix .check,$(MODES)): $$(basename $$@)
@tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
--mode=$(basename $@)
$(addsuffix .check,$(ARCHES)): $$(basename $$@)
@tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(basename $@)
$(CHECKS): $$(basename $$@)
@tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@)
# Clean targets. You can clean each architecture individually, or everything.
$(addsuffix .clean,$(ARCHES)):
rm -f $(OUTDIR)/Makefile-$(basename $@)
rm -rf $(OUTDIR)/$(basename $@).release
rm -rf $(OUTDIR)/$(basename $@).debug
find $(OUTDIR) -regex '.*\(host\|target\)-$(basename $@)\.mk' -delete
clean: $(addsuffix .clean,$(ARCHES))
# GYP file generation targets.
$(OUTDIR)/Makefile-ia32: $(GYPFILES) $(ENVFILE)
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. -Dtarget_arch=ia32 \
-S-ia32 $(GYPFLAGS)
$(OUTDIR)/Makefile-x64: $(GYPFILES) $(ENVFILE)
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. -Dtarget_arch=x64 \
-S-x64 $(GYPFLAGS)
$(OUTDIR)/Makefile-arm: $(GYPFILES) $(ENVFILE)
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. -Ibuild/armu.gypi \
-S-arm $(GYPFLAGS)
# Replaces the old with the new environment file if they're different, which
# will trigger GYP to regenerate Makefiles.
$(ENVFILE): $(ENVFILE).new
@if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) >/dev/null; \
then rm $(ENVFILE).new; \
else mv $(ENVFILE).new $(ENVFILE); fi
# Stores current GYPFLAGS in a file.
$(ENVFILE).new:
@mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new;
# Dependencies.
dependencies:
svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \
--revision 1026