| // Copyright 2015 The LUCI Authors. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| package datastore |
| |
| import ( |
| "fmt" |
| |
| "golang.org/x/net/context" |
| ) |
| |
| // Cursor wraps datastore.Cursor. |
| type Cursor interface { |
| fmt.Stringer |
| } |
| |
| // CursorCB is used to obtain a Cursor while Run'ing a query on either |
| // Interface or RawInterface. |
| // |
| // it can be invoked to obtain the current cursor. |
| type CursorCB func() (Cursor, error) |
| |
| // RawRunCB is the callback signature provided to RawInterface.Run |
| // |
| // - key is the Key of the entity |
| // - val is the data of the entity (or nil, if the query was keys-only) |
| // |
| // Return nil to continue iterating through the query results, or an error to |
| // stop. If you return the error `Stop`, then Run will stop the query and |
| // return nil. |
| type RawRunCB func(key *Key, val PropertyMap, getCursor CursorCB) error |
| |
| // GetMultiCB is the callback signature provided to RawInterface.GetMulti |
| // |
| // - idx is the index of the entity, ranging from 0 through len-1. |
| // - val is the data of the entity |
| // * It may be nil if some of the keys to the GetMulti were bad, since all |
| // keys are validated before the RPC occurs! |
| // - err is an error associated with this entity (e.g. ErrNoSuchEntity). |
| // |
| // The callback is called once per element. It may be called concurrently, and |
| // may be called out of order. The "idx" variable describes which element is |
| // being processed. If any callbacks are invoked, exactly one callback will be |
| // invoked for each supplied element. |
| type GetMultiCB func(idx int, val PropertyMap, err error) |
| |
| // NewKeyCB is the callback signature provided to RawInterface.PutMulti and |
| // RawInterface.AllocateIDs. It is invoked once for each positional key that |
| // was generated as the result of a call. |
| // |
| // - idx is the index of the entity, ranging from 0 through len-1. |
| // - key is the new key for the entity (if the original was incomplete) |
| // * It may be nil if some of the keys/vals to the PutMulti were bad, since |
| // all keys are validated before the RPC occurs! |
| // - err is an error associated with putting this entity. |
| // |
| // The callback is called once per element. It may be called concurrently, and |
| // may be called out of order. The "idx" variable describes which element is |
| // being processed. If any callbacks are invoked, exactly one callback will be |
| // invoked for each supplied element. |
| type NewKeyCB func(idx int, key *Key, err error) |
| |
| // DeleteMultiCB is the callback signature provided to RawInterface.DeleteMulti |
| // |
| // - idx is the index of the entity, ranging from 0 through len-1. |
| // - err is an error associated with deleting this entity. |
| // |
| // The callback is called once per element. It may be called concurrently, and |
| // may be called out of order. The "idx" variable describes which element is |
| // being processed. If any callbacks are invoked, exactly one callback will be |
| // invoked for each supplied element. |
| type DeleteMultiCB func(idx int, err error) |
| |
| // Constraints represent implementation constraints. |
| // |
| // A zero-value Constraints is valid, and indicates that no constraints are |
| // present. |
| type Constraints struct { |
| // MaxGetSize is the maximum number of entities that can be referenced in a |
| // single GetMulti call. If <= 0, no constraint is applied. |
| MaxGetSize int |
| // MaxPutSize is the maximum number of entities that can be referenced in a |
| // single PutMulti call. If <= 0, no constraint is applied. |
| MaxPutSize int |
| // MaxDeleteSize is the maximum number of entities that can be referenced in a |
| // single DeleteMulti call. If <= 0, no constraint is applied. |
| MaxDeleteSize int |
| } |
| |
| type nullMetaGetterType struct{} |
| |
| func (nullMetaGetterType) GetMeta(string) (interface{}, bool) { return nil, false } |
| |
| var nullMetaGetter MetaGetter = nullMetaGetterType{} |
| |
| // MultiMetaGetter is a carrier for metadata, used with RawInterface.GetMulti |
| // |
| // It's OK to default-construct this. GetMeta will just return |
| // (nil, ErrMetaFieldUnset) for every index. |
| type MultiMetaGetter []MetaGetter |
| |
| // NewMultiMetaGetter returns a new MultiMetaGetter object. data may be nil. |
| func NewMultiMetaGetter(data []PropertyMap) MultiMetaGetter { |
| if len(data) == 0 { |
| return nil |
| } |
| inner := make(MultiMetaGetter, len(data)) |
| for i, pm := range data { |
| inner[i] = pm |
| } |
| return inner |
| } |
| |
| // GetMeta is like PropertyLoadSaver.GetMeta, but it also takes an index |
| // indicating which slot you want metadata for. If idx isn't there, this |
| // returns (nil, ErrMetaFieldUnset). |
| func (m MultiMetaGetter) GetMeta(idx int, key string) (interface{}, bool) { |
| return m.GetSingle(idx).GetMeta(key) |
| } |
| |
| // GetSingle gets a single MetaGetter at the specified index. |
| func (m MultiMetaGetter) GetSingle(idx int) MetaGetter { |
| if idx >= len(m) || m[idx] == nil { |
| return nullMetaGetter |
| } |
| return m[idx] |
| } |
| |
| // RawInterface implements the datastore functionality without any of the fancy |
| // reflection stuff. This is so that Filters can avoid doing lots of redundant |
| // reflection work. See datastore.Interface for a more user-friendly interface. |
| type RawInterface interface { |
| // AllocateIDs allows you to allocate IDs from the datastore without putting |
| // any data. The supplied keys must be PartialValid and share the same entity |
| // type. |
| // |
| // If there's no error, the keys in the slice will be replaced with keys |
| // containing integer IDs assigned to them. |
| AllocateIDs(keys []*Key, cb NewKeyCB) error |
| |
| // RunInTransaction runs f in a transaction. |
| // |
| // opts may be nil. |
| // |
| // NOTE: Implementations and filters are guaranteed that: |
| // - f is not nil |
| RunInTransaction(f func(c context.Context) error, opts *TransactionOptions) error |
| |
| // DecodeCursor converts a string returned by a Cursor into a Cursor instance. |
| // It will return an error if the supplied string is not valid, or could not |
| // be decoded by the implementation. |
| DecodeCursor(s string) (Cursor, error) |
| |
| // Run executes the given query, and calls `cb` for each successfully item. |
| // |
| // NOTE: Implementations and filters are guaranteed that: |
| // - query is not nil |
| // - cb is not nil |
| Run(q *FinalizedQuery, cb RawRunCB) error |
| |
| // Count executes the given query and returns the number of entries which |
| // match it. |
| Count(q *FinalizedQuery) (int64, error) |
| |
| // GetMulti retrieves items from the datastore. |
| // |
| // If there was a server error, it will be returned directly. Otherwise, |
| // callback will execute once per key/value pair, returning either the |
| // operation result or individual error for each position. If the callback |
| // receives an error, it will immediately forward that error and stop |
| // subsequent callbacks. |
| // |
| // meta is used to propagate metadata from higher levels. |
| // |
| // NOTE: Implementations and filters are guaranteed that: |
| // - len(keys) > 0 |
| // - all keys are Valid, !Incomplete, and in the current namespace |
| // - cb is not nil |
| GetMulti(keys []*Key, meta MultiMetaGetter, cb GetMultiCB) error |
| |
| // PutMulti writes items to the datastore. |
| // |
| // If there was a server error, it will be returned directly. Otherwise, |
| // callback will execute once per key/value pair, returning either the |
| // operation result or individual error for each position. If the callback |
| // receives an error, it will immediately forward that error and stop |
| // subsequent callbacks. |
| // |
| // NOTE: Implementations and filters are guaranteed that: |
| // - len(keys) > 0 |
| // - len(keys) == len(vals) |
| // - all keys are Valid and in the current namespace |
| // - cb is not nil |
| PutMulti(keys []*Key, vals []PropertyMap, cb NewKeyCB) error |
| |
| // DeleteMulti removes items from the datastore. |
| // |
| // If there was a server error, it will be returned directly. Otherwise, |
| // callback will execute once per key/value pair, returning either the |
| // operation result or individual error for each position. If the callback |
| // receives an error, it will immediately forward that error and stop |
| // subsequent callbacks. |
| // |
| // NOTE: Implementations and filters are guaranteed that |
| // - len(keys) > 0 |
| // - all keys are Valid, !Incomplete, and in the current namespace |
| // - none keys of the keys are 'special' (use a kind prefixed with '__') |
| // - cb is not nil |
| DeleteMulti(keys []*Key, cb DeleteMultiCB) error |
| |
| // WithoutTransaction returns a derived Context without a transaction applied. |
| // This may be called even when outside of a transaction, in which case the |
| // input Context is a valid return value. |
| WithoutTransaction() context.Context |
| |
| // CurrentTransaction returns a reference to the current Transaction, or nil |
| // if the Context does not have a current Transaction. |
| CurrentTransaction() Transaction |
| |
| // Constraints returns this implementation's constraints. |
| Constraints() Constraints |
| |
| // GetTestable returns the Testable interface for the implementation, or nil |
| // if there is none. |
| GetTestable() Testable |
| } |