blob: fdff84889acfcabe076b70688d59c91937a13934 [file] [log] [blame]
Copyright 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Contributed by the Arenaire and Cacao projects, INRIA.
This file is part of the GNU MPFR Library.
The GNU MPFR Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
The GNU MPFR Library is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License
along with the GNU MPFR Library; see the file COPYING.LIB. If not, write to
the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02110-1301, USA.
Changes from version 2.4.0 to version 2.4.1:
- Security fix in mpfr_snprintf and mpfr_vsnprintf (buffer overflow).
- Configure: new checks for length modifiers 'hh' and 'll' (new in C99)
as 'hh' is absent on alpha-OSF1-V5.
- Miscellaneous corrections in the MPFR manual. In particular,
mpfr_inits, mpfr_inits2, mpfr_clears and MPFR_DECL_INIT have been
in the public API since MPFR 2.4.0.
Changes from versions 2.3.* to version 2.4.0:
- The "andouillette sauce moutarde" release.
- MPFR is now a GNU package.
- Changes in the behavior of mpfr_strtofr and in its documentation
concerning particular cases where the code and the documentation
did not match; this change is also present in MPFR 2.3.1.
- Behavior of mpfr_check_range changed: if the value is an inexact
infinity, the overflow flag is set (in case it was lost); this
change is also present in MPFR 2.3.2.
- Function mpfr_init_gmp_rand (only defined when building MPFR without
the --with-gmp-build configure option) is no longer defined at all.
This function was private and not documented, and was used only in
the MPFR test suite. User code that calls it is regarded as broken
and may fail as a consequence. Running the old test suite against
MPFR 2.4.0 may also fail.
- New functions:
* between a MPFR number and a double: mpfr_add_d, mpfr_sub_d,
mpfr_d_sub, mpfr_mul_d, mpfr_div_d, mpfr_d_div,
* formatted input/output:
mpfr_printf, mpfr_fprintf, mpfr_vprintf, mpfr_vfprintf,
mpfr_sprintf, mpfr_snprintf, mpfr_vsprintf, mpfr_vsnprintf,
mpfr_asprintf, mpfr_vasprintf.
* mpfr_sinh_cosh, mpfr_li2, mpfr_modf, mpfr_fmod, mpfr_rec_sqrt.
- Configure test for TLS support.
- Get default $CC and $CFLAGS from gmp.h (__GMP_CC / __GMP_CFLAGS,
which are available as of GMP 4.2.3).
- Documented the fact that mpfr_random and mpfr_random2 will be
suppressed in the next release, and that the specification of
mpfr_eq may change in the next release (for compatibility with
the mpf layer of GMP).
- Test coverage: 96.7% lines of code
- Bug fixes.
Changes from versions 2.2.* to version 2.3.0:
- The file is now installed in the share subdirectory
(as required by the Filesystem Hierarchy Standard); see output
of "./configure --help".
- The shared library is now enabled by default. If the MPFR build
fails on your platform, try the --disable-shared configure option
to disable the shared library.
- Thread-safe support with Microsoft Visual compiler.
- New functions mpfr_j0, mpfr_j1, mpfr_jn, mpfr_y0, mpfr_y1, mpfr_yn,
mpfr_lgamma, mpfr_remainder, mpfr_remquo, mpfr_fms, mpfr_signbit,
mpfr_setsign, mpfr_copysign, mpfr_get_patches.
- Functions mpfr_sin, mpfr_cos and mpfr_sin_cos improved (argument
- More detailed MPFR manual.
- Improved tests (make check).
- Bug fixes.
Changes from versions 2.1.* to version 2.2.0:
- Bug fixes.
- new functions mpfr_set_overflow, mpfr_set_underflow, mpfr_set_inexflag,
mpfr_set_erangeflag, mpfr_set_nanflag, mpfr_erfc, mpfr_atan2, mpfr_pow_z,
mpfr_subnormalize, mpfr_const_catalan, mpfr_sec, mpfr_csc, mpfr_cot,
mpfr_root, mpfr_eint, mpfr_get_f, mpfr_sech, mpfr_csch, mpfr_coth,
- Remove the exported MPFR variables from mpfr.h to mpfr-impl.h.
(They were undocumented, so programs which respect the API still work).
- Grep CC and CFLAGS from GMP Makefile if possible.
- Math functions are faster (both average and worst cases).
- Better support for long double.
- Shared library of MPFR.
- Binary compatible with previous versions if you do not use undocumented
- Thread safe (if built with --enable-thread-safe).
- Logging facility.
- Change in the semantics of mpfr_out_str/mpfr_get_str when n_digits=0.
- Better locale support.
Changes from version 2.1.0 to version 2.1.1:
- Better way to detect the GMP library.
- Bug fixes.
Changes from version 2.0.3 to version 2.1.0:
- Bug fixes.
- new functions mpfr_strtofr, mpfr_set_uj, mpfr_set_sj, mpfr_set_ui_2exp,
mpfr_set_si_2exp, mpfr_set_sj_2exp, mpfr_set_uj_2exp, mpfr_get_uj,
mpfr_get_sj, mpfr_get_z, mpfr_free_str, mpfr_si_sub, mpfr_sub_si,
mpfr_mul_si, mpfr_si_div, mpfr_div_si, mpfr_sqr, mpfr_cmp_z, mpfr_cmp_q,
mpfr_zero_p, mpfr_free_cache, mpfr_sum, mpfr_get_version,
mpfr_get_default_rounding_mode, mpfr_get_emin_min, mpfr_get_emin_max,
mpfr_get_emax_min, mpfr_get_emax_max, mpfr_inits, mpfr_inits2, mpfr_clears,
mpfr_fits_intmax_p, mpfr_fits_uintmax_p, mpfr_clear_erangeflag,
mpfr_erangeflag_p, mpfr_rint_round, mpfr_rint_trunc, mpfr_rint_ceil,
- improved documentation.
- improved configure.
- improved portability (library and test suite).
- It handles correctly non IEEE-754 double.
- GMP internal files are not needed to install MPFR.
- It is faster with low-precision floating point.
- New global flag: ERANGE_FLAG.
- Binary incompatible with previous versions, but API compatible.
- mpfr_set_str doesn't allow anymore "@NAN@garbagechar" and "@INF@garbagechar",
allows base 0 (detection of the base), prefix (0x, 0b), leading whitespace.
Changes from version 2.0.2 to version 2.0.3:
- Bug fixes.
- Support GMP as a shared library (not fully tested).
Changes from version 2.0.1 to version 2.0.2:
- many bug fixes and other improvements.
- new functions mpfr_prec_round (replaces mpfr_round_prec), mpfr_get_exp,
mpfr_set_exp, mpfr_get_ld, mpfr_set_ld, mpfr_get_d_2exp, mpfr_get_si,
mpfr_get_ui, mpfr_nextabove, mpfr_nextbelow, mpfr_nexttoward, mpfr_frac,
mpfr_fits_*, mpfr_cmp_d, mpfr_cmpabs, mpfr_erf, mpfr_gamma, mpfr_zeta,
mpfr_greater_p, mpfr_greaterequal_p, mpfr_less_p, mpfr_lessequal_p,
mpfr_lessgreater_p, mpfr_equal_p, mpfr_unordered_p.
- removed functions: mpfr_print_binary, mpfr_round_prec (replaced by
mpfr_prec_round), mpfr_set_str_raw, mpfr_set_machine_rnd_mode.
- function mpfr_isinteger renamed mpfr_integer_p.
- return type of some functions changed from void to int, for consistency.
- return type of mpfr_set_prec changed from int to void.
- new values for exponent range.
- rename internal variables.
Changes from version 2001 to version 2.0.1:
- new mathematical functions: acos, acosh, asin, asinh, atan, atanh, cosh,
base-2 exponential and logarithm, base-10 logarithm, expm1, factorial,
pow, pow_si, pow_ui, sinh, tan, tanh, ui_pow, ui_pow_ui
- other new functions: mpfr_const_euler, mpfr_dim, mpfr_fma, mpfr_hypot,
mpfr_min, mpfr_max, mpfr_rint, mpfr_set_inf, mpfr_set_nan
- new operations with MPZ or MPQ: mpfr_{add,sub,mul,div}_[zq]
- new predicates: mpfr_inf_p, mpfr_nan_p, mpfr_number_p, mpfr_isinteger,
- add mechanism to set/check exponent range (overflow, underflow), partially
implemented in the mpfr functions.
- efficiency: mpfr_div is now faster when the divisor has a few limbs
- rounding: now mpfr_pow implements exact rounding, and most functions return a
ternary value indicating the position of the returned value wrt the exact one
(thus the return value is now 'int' instead of 'void')
- complete rewrite of the configuration files
- mpfr_get_d, mpfr_{add,sub}_one_ulp now get a rounding mode as 2nd argument
- some function names did change: mpz_set_fr is now mpfr_get_z_exp,
mpfr_print_raw is now mpfr_print_binary.
Changes from version 1.0 to version 2001:
- the default installation does not provide any more access to machine
rounding mode, and as a consequence does not compare MPFR results with
precision=53 to machine results. Add option -DTEST if you want to have
access to machine rounding mode, and to check MPFR results against.
- the MPFR files do not need <math.h> any more
- the header file <mpfr.h> was split into <mpfr.h> for exported functions
and <mpfr-impl.h> for internal functions. The user should not use functions
or macros from <mpfr-impl.h>, since those may change in further releases.
- <mpfr.h> was modified in order to make easy a C++ interface
- MPFR now deals with infinities (+infinity and -infinity) and NaN
- the missing function mpfr_swap is now available
- mpfr_zeta was removed (was incomplete)
- mpfr_init and mpfr_init2 now initialize the corresponding variable to 0
(like in other initialization functions from GNU MP)
- in case memory allocation fails, an error message is output
- several bugs of version 1.0 were fixed
Changes from version 0.4 to version 1.0:
- Version 1.0 now uses a standard configure/make installation.
- Version 1.0 implements all functions that are available in the MPF class
from GMP 3.1 (except mpf_swap) and a header file mpf2mpfr.h is included in
the distribution for easy change from MPF to MPFR.
- Version 1.0 implements new elementary functions: mpfr_sincos
- Some functions and macros have been renamed: mpfr_log2 is now
mpfr_const_log2, mpfr_pi is now mpfr_const_pi, SIGN is now MPFR_SIGN.
- Version 1.0 uses faster algorithms for mpfr_exp, mpfr_const_pi,
mpfr_const_log2. Compare the timings from version 1.0 and version 0.4.
- Version 1.0 corrects some bugs of version 0.4.
- The precision of MPFR variables is now named mpfr_prec, which makes it
easier to change it, to say unsigned long long. Same for the rounding mode
which is called mp_rnd_t.
You'll find other news concerning the GNU MPFR library on the web
page <>.