| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| @SANITIZER_SUPPORTED_TRUE@am__append_1 = include/sanitizer/common_interface_defs.h \ |
| @SANITIZER_SUPPORTED_TRUE@ include/sanitizer/lsan_interface.h \ |
| @SANITIZER_SUPPORTED_TRUE@ include/sanitizer/asan_interface.h |
| @SANITIZER_SUPPORTED_TRUE@@USING_MAC_INTERPOSE_FALSE@am__append_2 = interception |
| @LIBBACKTRACE_SUPPORTED_TRUE@@SANITIZER_SUPPORTED_TRUE@am__append_3 = libbacktrace |
| @SANITIZER_SUPPORTED_TRUE@@TSAN_SUPPORTED_TRUE@am__append_4 = tsan |
| subdir = . |
| DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ |
| $(top_srcdir)/configure $(am__configure_deps) \ |
| $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \ |
| $(srcdir)/libsanitizer.spec.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ |
| $(top_srcdir)/../config/depstand.m4 \ |
| $(top_srcdir)/../config/lead-dot.m4 \ |
| $(top_srcdir)/../config/libstdc++-raw-cxx.m4 \ |
| $(top_srcdir)/../config/multi.m4 \ |
| $(top_srcdir)/../config/override.m4 \ |
| $(top_srcdir)/../config/stdint.m4 \ |
| $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \ |
| $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = libsanitizer.spec |
| CONFIG_CLEAN_VPATH_FILES = |
| SOURCES = |
| MULTISRCTOP = |
| MULTIBUILDTOP = |
| MULTIDIRS = |
| MULTISUBDIR = |
| MULTIDO = true |
| MULTICLEAN = true |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__installdirs = "$(DESTDIR)$(sanincludedir)" \ |
| "$(DESTDIR)$(toolexeclibdir)" |
| HEADERS = $(nodist_saninclude_HEADERS) $(nodist_toolexeclib_HEADERS) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = sanitizer_common interception libbacktrace lsan asan \ |
| ubsan tsan |
| ACLOCAL = @ACLOCAL@ |
| ALLOC_FILE = @ALLOC_FILE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@ |
| BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@ |
| BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASDEPMODE = @CCASDEPMODE@ |
| CCASFLAGS = @CCASFLAGS@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| FORMAT_FILE = @FORMAT_FILE@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBSTDCXX_RAW_CXX_CXXFLAGS = @LIBSTDCXX_RAW_CXX_CXXFLAGS@ |
| LIBSTDCXX_RAW_CXX_LDFLAGS = @LIBSTDCXX_RAW_CXX_LDFLAGS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| VERSION = @VERSION@ |
| VIEW_FILE = @VIEW_FILE@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| enable_shared = @enable_shared@ |
| enable_static = @enable_static@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| link_libasan = @link_libasan@ |
| link_liblsan = @link_liblsan@ |
| link_libtsan = @link_libtsan@ |
| link_libubsan = @link_libubsan@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| multi_basedir = @multi_basedir@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_noncanonical = @target_noncanonical@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| toolexecdir = @toolexecdir@ |
| toolexeclibdir = @toolexeclibdir@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| ACLOCAL_AMFLAGS = -I .. -I ../config |
| sanincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include/sanitizer |
| nodist_saninclude_HEADERS = $(am__append_1) |
| @SANITIZER_SUPPORTED_TRUE@SUBDIRS = sanitizer_common $(am__append_2) \ |
| @SANITIZER_SUPPORTED_TRUE@ $(am__append_3) lsan asan ubsan \ |
| @SANITIZER_SUPPORTED_TRUE@ $(am__append_4) |
| gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) |
| |
| # Work around what appears to be a GNU make bug handling MAKEFLAGS |
| # values defined in terms of make variables, as is the case for CC and |
| # friends when we are called from the top level Makefile. |
| AM_MAKEFLAGS = \ |
| "AR_FLAGS=$(AR_FLAGS)" \ |
| "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ |
| "CFLAGS=$(CFLAGS)" \ |
| "CXXFLAGS=$(CXXFLAGS)" \ |
| "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ |
| "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ |
| "INSTALL=$(INSTALL)" \ |
| "INSTALL_DATA=$(INSTALL_DATA)" \ |
| "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ |
| "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ |
| "JC1FLAGS=$(JC1FLAGS)" \ |
| "LDFLAGS=$(LDFLAGS)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ |
| "MAKE=$(MAKE)" \ |
| "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ |
| "SHELL=$(SHELL)" \ |
| "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ |
| "exec_prefix=$(exec_prefix)" \ |
| "infodir=$(infodir)" \ |
| "libdir=$(libdir)" \ |
| "prefix=$(prefix)" \ |
| "includedir=$(includedir)" \ |
| "AR=$(AR)" \ |
| "AS=$(AS)" \ |
| "LD=$(LD)" \ |
| "LIBCFLAGS=$(LIBCFLAGS)" \ |
| "NM=$(NM)" \ |
| "PICFLAG=$(PICFLAG)" \ |
| "RANLIB=$(RANLIB)" \ |
| "DESTDIR=$(DESTDIR)" |
| |
| MAKEOVERRIDES = |
| nodist_toolexeclib_HEADERS = libsanitizer.spec |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f stamp-h1; \ |
| $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ |
| else :; fi |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| libsanitizer.spec: $(top_builddir)/config.status $(srcdir)/libsanitizer.spec.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| |
| # GNU Make needs to see an explicit $(MAKE) variable in the command it |
| # runs to enable its job server during parallel builds. Hence the |
| # comments below. |
| all-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) |
| install-multi: |
| $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) |
| |
| mostlyclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) |
| clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) |
| distclean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) |
| maintainer-clean-multi: |
| $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) |
| install-nodist_sanincludeHEADERS: $(nodist_saninclude_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(sanincludedir)" || $(MKDIR_P) "$(DESTDIR)$(sanincludedir)" |
| @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sanincludedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(sanincludedir)" || exit $$?; \ |
| done |
| |
| uninstall-nodist_sanincludeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$files" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(sanincludedir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(sanincludedir)" && rm -f $$files |
| install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" |
| @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \ |
| done |
| |
| uninstall-nodist_toolexeclibHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$files" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(toolexeclibdir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(toolexeclibdir)" && rm -f $$files |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile all-multi $(HEADERS) config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(sanincludedir)" "$(DESTDIR)$(toolexeclibdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-multi clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-multi distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-hdr \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-nodist_sanincludeHEADERS |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: install-multi install-nodist_toolexeclibHEADERS |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-multi maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-multi mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-nodist_sanincludeHEADERS \ |
| uninstall-nodist_toolexeclibHEADERS |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \ |
| clean-multi ctags-recursive distclean-multi install-am \ |
| install-multi install-strip maintainer-clean-multi \ |
| mostlyclean-multi tags-recursive |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am all-multi am--refresh check check-am clean \ |
| clean-generic clean-libtool clean-multi ctags ctags-recursive \ |
| distclean distclean-generic distclean-hdr distclean-libtool \ |
| distclean-multi distclean-tags dvi dvi-am html html-am info \ |
| info-am install install-am install-data install-data-am \ |
| install-dvi install-dvi-am install-exec install-exec-am \ |
| install-html install-html-am install-info install-info-am \ |
| install-man install-multi install-nodist_sanincludeHEADERS \ |
| install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic maintainer-clean-multi mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \ |
| pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ |
| uninstall-nodist_sanincludeHEADERS \ |
| uninstall-nodist_toolexeclibHEADERS |
| |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
