| # Copyright 2012 the V8 project authors. All rights reserved. |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are |
| # met: |
| # |
| # * Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # * Redistributions in binary form must reproduce the above |
| # copyright notice, this list of conditions and the following |
| # disclaimer in the documentation and/or other materials provided |
| # with the distribution. |
| # * Neither the name of Google Inc. nor the names of its |
| # contributors may be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| |
| # Variable default definitions. Override them by exporting them in your shell. |
| CXX ?= g++ |
| LINK ?= g++ |
| OUTDIR ?= out |
| TESTJOBS ?= -j16 |
| GYPFLAGS ?= |
| TESTFLAGS ?= |
| ANDROID_NDK_ROOT ?= |
| ANDROID_V8 ?= /data/local/v8 |
| |
| # Special build flags. Use them like this: "make library=shared" |
| |
| # library=shared || component=shared_library |
| ifeq ($(library), shared) |
| GYPFLAGS += -Dcomponent=shared_library |
| endif |
| ifdef component |
| GYPFLAGS += -Dcomponent=$(component) |
| endif |
| # console=readline |
| ifdef console |
| GYPFLAGS += -Dconsole=$(console) |
| endif |
| # disassembler=on |
| ifeq ($(disassembler), on) |
| GYPFLAGS += -Dv8_enable_disassembler=1 |
| endif |
| # objectprint=on |
| ifeq ($(objectprint), on) |
| GYPFLAGS += -Dv8_object_print=1 |
| endif |
| # snapshot=off |
| ifeq ($(snapshot), off) |
| GYPFLAGS += -Dv8_use_snapshot='false' |
| endif |
| # extrachecks=on/off |
| ifeq ($(extrachecks), on) |
| GYPFLAGS += -Dv8_enable_extra_checks=1 |
| endif |
| ifeq ($(extrachecks), off) |
| GYPFLAGS += -Dv8_enable_extra_checks=0 |
| endif |
| # gdbjit=on |
| ifeq ($(gdbjit), on) |
| GYPFLAGS += -Dv8_enable_gdbjit=1 |
| endif |
| # liveobjectlist=on |
| ifeq ($(liveobjectlist), on) |
| GYPFLAGS += -Dv8_use_liveobjectlist=true |
| endif |
| # vfp3=off |
| ifeq ($(vfp3), off) |
| GYPFLAGS += -Dv8_can_use_vfp_instructions=false |
| else |
| GYPFLAGS += -Dv8_can_use_vfp_instructions=true |
| endif |
| # debuggersupport=off |
| ifeq ($(debuggersupport), off) |
| GYPFLAGS += -Dv8_enable_debugger_support=0 |
| endif |
| # soname_version=1.2.3 |
| ifdef soname_version |
| GYPFLAGS += -Dsoname_version=$(soname_version) |
| endif |
| # werror=no |
| ifeq ($(werror), no) |
| GYPFLAGS += -Dwerror='' |
| endif |
| # presubmit=no |
| ifeq ($(presubmit), no) |
| TESTFLAGS += --no-presubmit |
| endif |
| # strictaliasing=off (workaround for GCC-4.5) |
| ifeq ($(strictaliasing), off) |
| GYPFLAGS += -Dv8_no_strict_aliasing=1 |
| endif |
| # regexp=interpreted |
| ifeq ($(regexp), interpreted) |
| GYPFLAGS += -Dv8_interpreted_regexp=1 |
| endif |
| |
| # ----------------- available targets: -------------------- |
| # - "dependencies": pulls in external dependencies (currently: GYP) |
| # - any arch listed in ARCHES (see below) |
| # - any mode listed in MODES |
| # - every combination <arch>.<mode>, e.g. "ia32.release" |
| # - "native": current host's architecture, release mode |
| # - any of the above with .check appended, e.g. "ia32.release.check" |
| # - "android": cross-compile for Android/ARM |
| # - default (no target specified): build all DEFAULT_ARCHES and MODES |
| # - "check": build all targets and run all tests |
| # - "<arch>.clean" for any <arch> in ARCHES |
| # - "clean": clean all ARCHES |
| |
| # ----------------- internal stuff ------------------------ |
| |
| # Architectures and modes to be compiled. Consider these to be internal |
| # variables, don't override them (use the targets instead). |
| ARCHES = ia32 x64 arm mipsel |
| DEFAULT_ARCHES = ia32 x64 arm |
| MODES = release debug |
| ANDROID_ARCHES = android_ia32 android_arm |
| |
| # List of files that trigger Makefile regeneration: |
| GYPFILES = build/all.gyp build/common.gypi build/standalone.gypi \ |
| preparser/preparser.gyp samples/samples.gyp src/d8.gyp \ |
| test/cctest/cctest.gyp tools/gyp/v8.gyp |
| |
| # Generates all combinations of ARCHES and MODES, e.g. "ia32.release". |
| BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES))) |
| ANDROID_BUILDS = $(foreach mode,$(MODES), \ |
| $(addsuffix .$(mode),$(ANDROID_ARCHES))) |
| # Generates corresponding test targets, e.g. "ia32.release.check". |
| CHECKS = $(addsuffix .check,$(BUILDS)) |
| ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS)) |
| # File where previously used GYPFLAGS are stored. |
| ENVFILE = $(OUTDIR)/environment |
| |
| .PHONY: all check clean dependencies $(ENVFILE).new native \ |
| $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \ |
| $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \ |
| $(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \ |
| must-set-ANDROID_NDK_ROOT |
| |
| # Target definitions. "all" is the default. |
| all: $(MODES) |
| |
| # Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile |
| # having been created before. |
| buildbot: |
| $(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \ |
| builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)" |
| |
| mips mips.release mips.debug: |
| @echo "V8 does not support big-endian MIPS builds at the moment," \ |
| "please use little-endian builds (mipsel)." |
| |
| # Compile targets. MODES and ARCHES are convenience targets. |
| .SECONDEXPANSION: |
| $(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES)) |
| |
| $(ARCHES): $(addprefix $$@.,$(MODES)) |
| |
| # Defines how to build a particular target (e.g. ia32.release). |
| $(BUILDS): $(OUTDIR)/Makefile.$$(basename $$@) |
| @$(MAKE) -C "$(OUTDIR)" -f Makefile.$(basename $@) \ |
| CXX="$(CXX)" LINK="$(LINK)" \ |
| BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \ |
| python -c "print raw_input().capitalize()") \ |
| builddir="$(shell pwd)/$(OUTDIR)/$@" |
| |
| native: $(OUTDIR)/Makefile.native |
| @$(MAKE) -C "$(OUTDIR)" -f Makefile.native \ |
| CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \ |
| builddir="$(shell pwd)/$(OUTDIR)/$@" |
| |
| $(ANDROID_ARCHES): $(addprefix $$@.,$(MODES)) |
| |
| $(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \ |
| must-set-ANDROID_NDK_ROOT Makefile.android |
| @$(MAKE) -f Makefile.android $@ \ |
| ARCH="$(basename $@)" \ |
| MODE="$(subst .,,$(suffix $@))" \ |
| OUTDIR="$(OUTDIR)" \ |
| GYPFLAGS="$(GYPFLAGS)" |
| |
| # Test targets. |
| check: all |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ |
| --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \ |
| $(TESTFLAGS) |
| |
| $(addsuffix .check,$(MODES)): $$(basename $$@) |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ |
| --mode=$(basename $@) $(TESTFLAGS) |
| |
| $(addsuffix .check,$(ARCHES)): $$(basename $$@) |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ |
| --arch=$(basename $@) $(TESTFLAGS) |
| |
| $(CHECKS): $$(basename $$@) |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ |
| --arch-and-mode=$(basename $@) $(TESTFLAGS) |
| |
| $(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@) |
| @tools/android-sync.sh $(basename $@) $(OUTDIR) \ |
| $(shell pwd) $(ANDROID_V8) |
| |
| $(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \ |
| --arch-and-mode=$(basename $@) \ |
| --timeout=600 \ |
| --special-command="tools/android-run.py @" |
| |
| $(addsuffix .check, $(ANDROID_ARCHES)): \ |
| $(addprefix $$(basename $$@).,$(MODES)).check |
| |
| native.check: native |
| @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR)/native \ |
| --arch-and-mode=. $(TESTFLAGS) |
| |
| # Clean targets. You can clean each architecture individually, or everything. |
| $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES)): |
| rm -f $(OUTDIR)/Makefile.$(basename $@) |
| rm -rf $(OUTDIR)/$(basename $@).release |
| rm -rf $(OUTDIR)/$(basename $@).debug |
| find $(OUTDIR) -regex '.*\(host\|target\).$(basename $@)\.mk' -delete |
| |
| native.clean: |
| rm -f $(OUTDIR)/Makefile.native |
| rm -rf $(OUTDIR)/native |
| find $(OUTDIR) -regex '.*\(host\|target\).native\.mk' -delete |
| |
| clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES)) native.clean |
| |
| # GYP file generation targets. |
| OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(ARCHES)) |
| $(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE) |
| GYP_GENERATORS=make \ |
| build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ |
| -Ibuild/standalone.gypi --depth=. \ |
| -Dv8_target_arch=$(subst .,,$(suffix $@)) \ |
| -S.$(subst .,,$(suffix $@)) $(GYPFLAGS) |
| |
| $(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE) |
| GYP_GENERATORS=make \ |
| build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \ |
| -Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS) |
| |
| must-set-ANDROID_NDK_ROOT: |
| ifndef ANDROID_NDK_ROOT |
| $(error ANDROID_NDK_ROOT is not set) |
| endif |
| |
| # Replaces the old with the new environment file if they're different, which |
| # will trigger GYP to regenerate Makefiles. |
| $(ENVFILE): $(ENVFILE).new |
| @if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) >/dev/null; \ |
| then rm $(ENVFILE).new; \ |
| else mv $(ENVFILE).new $(ENVFILE); fi |
| |
| # Stores current GYPFLAGS in a file. |
| $(ENVFILE).new: |
| @mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \ |
| echo "CXX=$(CXX)" >> $(ENVFILE).new |
| |
| # Dependencies. |
| dependencies: |
| svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \ |
| --revision 1282 |
