| // Copyright 2014 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| // This file intentionally does not have header guards, it's included |
| // inside a macro to generate values. |
| |
| // This file contains the list of QUIC protocol flags. |
| |
| // If true, it will return as soon as an error is detected while validating |
| // CHLO. |
| QUIC_FLAG(bool, FLAGS_use_early_return_when_verifying_chlo, true) |
| |
| // If true, QUIC BBR congestion control may be enabled via Finch and/or via QUIC |
| // connection options. |
| QUIC_FLAG(bool, FLAGS_quic_allow_bbr, false) |
| |
| // Time period for which a given connection_id should live in the time-wait |
| // state. |
| QUIC_FLAG(int64_t, FLAGS_quic_time_wait_list_seconds, 200) |
| |
| // Currently, this number is quite conservative. The max QPS limit for an |
| // individual server silo is currently set to 1000 qps, though the actual max |
| // that we see in the wild is closer to 450 qps. Regardless, this means that |
| // the longest time-wait list we should see is 200 seconds * 1000 qps, 200000. |
| // Of course, there are usually many queries per QUIC connection, so we allow a |
| // factor of 3 leeway. |
| // |
| // Maximum number of connections on the time-wait list. A negative value implies |
| // no configured limit. |
| QUIC_FLAG(int64_t, FLAGS_quic_time_wait_list_max_connections, 600000) |
| |
| // Enables server-side support for QUIC stateless rejects. |
| QUIC_FLAG(bool, FLAGS_enable_quic_stateless_reject_support, true) |
| |
| // This flag is not in use, just to keep consistency for shared code. |
| QUIC_FLAG(bool, FLAGS_quic_always_log_bugs_for_tests, true) |
| |
| // If true, multipath is enabled for the connection. |
| QUIC_FLAG(bool, FLAGS_quic_enable_multipath, false) |
| |
| // If true, require handshake confirmation for QUIC connections, functionally |
| // disabling 0-rtt handshakes. |
| // TODO(rtenneti): Enable this flag after CryptoServerTest's are fixed. |
| QUIC_FLAG(bool, FLAGS_quic_require_handshake_confirmation, false) |
| |
| // If true, Cubic's epoch is shifted when the sender is application-limited. |
| QUIC_FLAG(bool, FLAGS_shift_quic_cubic_epoch_when_app_limited, true) |
| |
| // If true, QUIC will measure head of line (HOL) blocking due between |
| // streams due to packet losses on the headers stream. The |
| // measurements will be surfaced via UMA histogram |
| // Net.QuicSession.HeadersHOLBlockedTime. |
| QUIC_FLAG(bool, FLAGS_quic_measure_headers_hol_blocking_time, true) |
| |
| // If true, disable pacing in QUIC. |
| QUIC_FLAG(bool, FLAGS_quic_disable_pacing_for_perf_tests, false) |
| |
| // If true, Close the connection instead of writing unencrypted stream data. |
| QUIC_FLAG(bool, FLAGS_quic_never_write_unencrypted_data, true) |
| |
| // If true, QUIC connections can do bandwidth resumption with an initial window |
| // of < 10 packets. |
| QUIC_FLAG(bool, FLAGS_quic_no_lower_bw_resumption_limit, true) |
| |
| // Use largest acked in the most recent ack instead of largest acked ever in |
| // loss recovery. |
| QUIC_FLAG(bool, FLAGS_quic_loss_recovery_use_largest_acked, true) |
| |
| // Only set one alarm for sending at once, either the send alarm or |
| // retransmission alarm. Disabled because it breaks QUIC time loss detection. |
| QUIC_FLAG(bool, FLAGS_quic_only_one_sending_alarm, false) |
| |
| // If true, QUIC public reset packets will have the \"pre-v33\" public header |
| // flags. |
| QUIC_FLAG(bool, FLAGS_quic_use_old_public_reset_packets, true) |
| |
| // If true, QUIC will use cheap stateless rejects without creating a full |
| // connection. |
| QUIC_FLAG(bool, FLAGS_quic_use_cheap_stateless_rejects, false) |
| |
| // If true, QUIC respect HTTP2 SETTINGS frame rather than always close the |
| // connection. |
| QUIC_FLAG(bool, FLAGS_quic_respect_http2_settings_frame, true) |
| |
| // If true, enables QUIC_VERSION_35. |
| QUIC_FLAG(bool, FLAGS_quic_enable_version_35, true) |
| |
| // If true, re-enables QUIC_VERSION_36. |
| QUIC_FLAG(bool, FLAGS_quic_enable_version_36, true) |
| |
| // If true, enables QUIC_VERSION_36. |
| QUIC_FLAG(bool, FLAGS_quic_enable_version_36_v2, true) |
| |
| // If true, use async codepaths to invoke ProofSource::GetProof. |
| QUIC_FLAG(bool, FLAGS_enable_async_get_proof, false) |
| |
| // If true, QuicAlarm::Update will call a faster UpdateImpl implementation |
| // instead of canceling and reregistering the alarm. |
| QUIC_FLAG(bool, FLAGS_quic_change_alarms_efficiently, true) |
| |
| // If true, requires handshake confirmations for all QUIC handshakes with |
| // versions less than 33. |
| QUIC_FLAG(bool, FLAGS_quic_require_handshake_confirmation_pre33, false) |
| |
| // If true, fix a bug with which QuicStreamSequencerBuffer can\'t release block |
| // memory in time. |
| QUIC_FLAG(bool, FLAGS_quic_sequencer_buffer_retire_block_in_time, true) |
| |
| // Remove obsolete code to force QUIC to go forward secure, now that the server |
| // immediately goes forward secure. |
| QUIC_FLAG(bool, FLAGS_quic_remove_obsolete_forward_secure, true) |
| |
| // If true, close QUIC connection explicitly on write error due to packet being |
| // too large. |
| QUIC_FLAG(bool, FLAGS_quic_close_connection_on_packet_too_large, true) |
| |
| // If true, close the write side of a QUIC spdy stream when all queued bytes |
| // have been written and a FIN has been sent. |
| QUIC_FLAG(bool, FLAGS_quic_close_stream_after_writing_queued_data, true) |
| |
| // If true, close connection with QUIC_TOO_MANY_FRAME_GAPS error when number of |
| // gaps in QuicStreamSequenceBuffer exceeds allowed limit. |
| QUIC_FLAG(bool, FLAGS_quic_limit_frame_gaps_in_buffer, true) |
| |
| // If true, v33 QUIC client uses 1 bit to specify 8-byte connection id in public |
| // flag. |
| QUIC_FLAG(bool, FLAGS_quic_remove_v33_hacks, true) |
| |
| // If true, use the CHLO packet size, not message size when determining how |
| // large a REJ can be. |
| QUIC_FLAG(bool, FLAGS_quic_use_chlo_packet_size, true) |
| |
| // If true, defer creation of new connection till its CHLO arrives. |
| QUIC_FLAG(bool, FLAGS_quic_buffer_packet_till_chlo, true) |
| |
| // If true, the connection will check whether it is application-limited, and |
| // notify the congestion controller about it. |
| QUIC_FLAG(bool, FLAGS_quic_enable_app_limited_check, true) |
| |
| // Deprecate QuicPacketCreator::next_packet_number_length_ because it's no |
| // longer necessary. |
| QUIC_FLAG(bool, FLAGS_quic_simple_packet_number_length_2, true) |
| |
| // If true, disables QUIC version less than 32. |
| QUIC_FLAG(bool, FLAGS_quic_disable_pre_32, false) |
| |
| // If true, QUIC will enforce the MTU limit for connections that may require a |
| // small MTU. |
| QUIC_FLAG(bool, FLAGS_quic_enforce_mtu_limit, false) |
| |
| // Disable MTU probing if MTU probe causes ERR_MSG_TOO_BIG instead of aborting |
| // the connection. |
| QUIC_FLAG(bool, FLAGS_graceful_emsgsize_on_mtu_probe, true) |
| |
| // If true, do not force sending ack when connection is closed because of |
| // message too long (EMSGSIZE) write error. |
| QUIC_FLAG(bool, FLAGS_quic_do_not_send_ack_on_emsgsize, true) |
| |
| // If true, postpone multipath flag validation to ProcessValidatedPacket. |
| QUIC_FLAG(bool, FLAGS_quic_postpone_multipath_flag_validation, true) |
| |
| // If true, set a QUIC connection's last_sent_for_timeout_ to the send time of |
| // the first packet sent after receiving a packet, even if the sent packet is |
| // a retransmission |
| QUIC_FLAG(bool, FLAGS_quic_better_last_send_for_timeout, true) |
| |
| // If true, send an explicit TTL in QUIC REJ messages to mitigate client clock |
| // skew. |
| QUIC_FLAG(bool, FLAGS_quic_send_scfg_ttl, true) |
| |
| // If true, only open limited number of quic sessions per epoll event. Leave the |
| // rest to next event. This flag can be turned on only if |
| // --quic_buffer_packet_till_chlo is true. |
| QUIC_FLAG(bool, FLAGS_quic_limit_num_new_sessions_per_epoll_loop, true) |