| // Copyright (c) 2012 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "sandbox/linux/seccomp-bpf/syscall.h" |
| |
| #include <errno.h> |
| #include <stdint.h> |
| |
| #include "base/logging.h" |
| #include "sandbox/linux/bpf_dsl/seccomp_macros.h" |
| |
| namespace sandbox { |
| |
| namespace { |
| |
| #if defined(ARCH_CPU_X86_FAMILY) || defined(ARCH_CPU_ARM_FAMILY) || \ |
| defined(ARCH_CPU_MIPS_FAMILY) |
| // Number that's not currently used by any Linux kernel ABIs. |
| const int kInvalidSyscallNumber = 0x351d3; |
| #else |
| #error Unrecognized architecture |
| #endif |
| |
| asm(// We need to be able to tell the kernel exactly where we made a |
| // system call. The C++ compiler likes to sometimes clone or |
| // inline code, which would inadvertently end up duplicating |
| // the entry point. |
| // "gcc" can suppress code duplication with suitable function |
| // attributes, but "clang" doesn't have this ability. |
| // The "clang" developer mailing list suggested that the correct |
| // and portable solution is a file-scope assembly block. |
| // N.B. We do mark our code as a proper function so that backtraces |
| // work correctly. But we make absolutely no attempt to use the |
| // ABI's calling conventions for passing arguments. We will only |
| // ever be called from assembly code and thus can pick more |
| // suitable calling conventions. |
| #if defined(__i386__) |
| ".text\n" |
| ".align 16, 0x90\n" |
| ".type SyscallAsm, @function\n" |
| "SyscallAsm:.cfi_startproc\n" |
| // Check if "%eax" is negative. If so, do not attempt to make a |
| // system call. Instead, compute the return address that is visible |
| // to the kernel after we execute "int $0x80". This address can be |
| // used as a marker that BPF code inspects. |
| "test %eax, %eax\n" |
| "jge 1f\n" |
| // Always, make sure that our code is position-independent, or |
| // address space randomization might not work on i386. This means, |
| // we can't use "lea", but instead have to rely on "call/pop". |
| "call 0f; .cfi_adjust_cfa_offset 4\n" |
| "0:pop %eax; .cfi_adjust_cfa_offset -4\n" |
| "addl $2f-0b, %eax\n" |
| "ret\n" |
| // Save register that we don't want to clobber. On i386, we need to |
| // save relatively aggressively, as there are a couple or registers |
| // that are used internally (e.g. %ebx for position-independent |
| // code, and %ebp for the frame pointer), and as we need to keep at |
| // least a few registers available for the register allocator. |
| "1:push %esi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset esi, 0\n" |
| "push %edi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset edi, 0\n" |
| "push %ebx; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebx, 0\n" |
| "push %ebp; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebp, 0\n" |
| // Copy entries from the array holding the arguments into the |
| // correct CPU registers. |
| "movl 0(%edi), %ebx\n" |
| "movl 4(%edi), %ecx\n" |
| "movl 8(%edi), %edx\n" |
| "movl 12(%edi), %esi\n" |
| "movl 20(%edi), %ebp\n" |
| "movl 16(%edi), %edi\n" |
| // Enter the kernel. |
| "int $0x80\n" |
| // This is our "magic" return address that the BPF filter sees. |
| "2:" |
| // Restore any clobbered registers that we didn't declare to the |
| // compiler. |
| "pop %ebp; .cfi_restore ebp; .cfi_adjust_cfa_offset -4\n" |
| "pop %ebx; .cfi_restore ebx; .cfi_adjust_cfa_offset -4\n" |
| "pop %edi; .cfi_restore edi; .cfi_adjust_cfa_offset -4\n" |
| "pop %esi; .cfi_restore esi; .cfi_adjust_cfa_offset -4\n" |
| "ret\n" |
| ".cfi_endproc\n" |
| "9:.size SyscallAsm, 9b-SyscallAsm\n" |
| #elif defined(__x86_64__) |
| ".text\n" |
| ".align 16, 0x90\n" |
| ".type SyscallAsm, @function\n" |
| "SyscallAsm:.cfi_startproc\n" |
| // Check if "%rdi" is negative. If so, do not attempt to make a |
| // system call. Instead, compute the return address that is visible |
| // to the kernel after we execute "syscall". This address can be |
| // used as a marker that BPF code inspects. |
| "test %rdi, %rdi\n" |
| "jge 1f\n" |
| // Always make sure that our code is position-independent, or the |
| // linker will throw a hissy fit on x86-64. |
| "lea 2f(%rip), %rax\n" |
| "ret\n" |
| // Now we load the registers used to pass arguments to the system |
| // call: system call number in %rax, and arguments in %rdi, %rsi, |
| // %rdx, %r10, %r8, %r9. Note: These are all caller-save registers |
| // (only %rbx, %rbp, %rsp, and %r12-%r15 are callee-save), so no |
| // need to worry here about spilling registers or CFI directives. |
| "1:movq %rdi, %rax\n" |
| "movq 0(%rsi), %rdi\n" |
| "movq 16(%rsi), %rdx\n" |
| "movq 24(%rsi), %r10\n" |
| "movq 32(%rsi), %r8\n" |
| "movq 40(%rsi), %r9\n" |
| "movq 8(%rsi), %rsi\n" |
| // Enter the kernel. |
| "syscall\n" |
| // This is our "magic" return address that the BPF filter sees. |
| "2:ret\n" |
| ".cfi_endproc\n" |
| "9:.size SyscallAsm, 9b-SyscallAsm\n" |
| #elif defined(__arm__) |
| // Throughout this file, we use the same mode (ARM vs. thumb) |
| // that the C++ compiler uses. This means, when transfering control |
| // from C++ to assembly code, we do not need to switch modes (e.g. |
| // by using the "bx" instruction). It also means that our assembly |
| // code should not be invoked directly from code that lives in |
| // other compilation units, as we don't bother implementing thumb |
| // interworking. That's OK, as we don't make any of the assembly |
| // symbols public. They are all local to this file. |
| ".text\n" |
| ".align 2\n" |
| ".type SyscallAsm, %function\n" |
| #if defined(__thumb__) |
| ".thumb_func\n" |
| #else |
| ".arm\n" |
| #endif |
| "SyscallAsm:\n" |
| #if !defined(__native_client_nonsfi__) |
| // .fnstart and .fnend pseudo operations creates unwind table. |
| // It also creates a reference to the symbol __aeabi_unwind_cpp_pr0, which |
| // is not provided by PNaCl toolchain. Disable it. |
| ".fnstart\n" |
| #endif |
| "@ args = 0, pretend = 0, frame = 8\n" |
| "@ frame_needed = 1, uses_anonymous_args = 0\n" |
| #if defined(__thumb__) |
| ".cfi_startproc\n" |
| "push {r7, lr}\n" |
| ".save {r7, lr}\n" |
| ".cfi_offset 14, -4\n" |
| ".cfi_offset 7, -8\n" |
| ".cfi_def_cfa_offset 8\n" |
| #else |
| "stmfd sp!, {fp, lr}\n" |
| "add fp, sp, #4\n" |
| #endif |
| // Check if "r0" is negative. If so, do not attempt to make a |
| // system call. Instead, compute the return address that is visible |
| // to the kernel after we execute "swi 0". This address can be |
| // used as a marker that BPF code inspects. |
| "cmp r0, #0\n" |
| "bge 1f\n" |
| "adr r0, 2f\n" |
| "b 2f\n" |
| // We declared (almost) all clobbered registers to the compiler. On |
| // ARM there is no particular register pressure. So, we can go |
| // ahead and directly copy the entries from the arguments array |
| // into the appropriate CPU registers. |
| "1:ldr r5, [r6, #20]\n" |
| "ldr r4, [r6, #16]\n" |
| "ldr r3, [r6, #12]\n" |
| "ldr r2, [r6, #8]\n" |
| "ldr r1, [r6, #4]\n" |
| "mov r7, r0\n" |
| "ldr r0, [r6, #0]\n" |
| // Enter the kernel |
| "swi 0\n" |
| // Restore the frame pointer. Also restore the program counter from |
| // the link register; this makes us return to the caller. |
| #if defined(__thumb__) |
| "2:pop {r7, pc}\n" |
| ".cfi_endproc\n" |
| #else |
| "2:ldmfd sp!, {fp, pc}\n" |
| #endif |
| #if !defined(__native_client_nonsfi__) |
| // Do not use .fnstart and .fnend for PNaCl toolchain. See above comment, |
| // for more details. |
| ".fnend\n" |
| #endif |
| "9:.size SyscallAsm, 9b-SyscallAsm\n" |
| #elif defined(__mips32__) |
| ".text\n" |
| ".option pic2\n" |
| ".align 4\n" |
| ".global SyscallAsm\n" |
| ".type SyscallAsm, @function\n" |
| "SyscallAsm:.ent SyscallAsm\n" |
| ".frame $sp, 40, $ra\n" |
| ".set push\n" |
| ".set noreorder\n" |
| ".cpload $t9\n" |
| "addiu $sp, $sp, -40\n" |
| "sw $ra, 36($sp)\n" |
| // Check if "v0" is negative. If so, do not attempt to make a |
| // system call. Instead, compute the return address that is visible |
| // to the kernel after we execute "syscall". This address can be |
| // used as a marker that BPF code inspects. |
| "bgez $v0, 1f\n" |
| " nop\n" |
| // This is equivalent to "la $v0, 2f". |
| // LA macro has to be avoided since LLVM-AS has issue with LA in PIC mode |
| // https://llvm.org/bugs/show_bug.cgi?id=27644 |
| "lw $v0, %got(2f)($gp)\n" |
| "addiu $v0, $v0, %lo(2f)\n" |
| "b 2f\n" |
| " nop\n" |
| // On MIPS first four arguments go to registers a0 - a3 and any |
| // argument after that goes to stack. We can go ahead and directly |
| // copy the entries from the arguments array into the appropriate |
| // CPU registers and on the stack. |
| "1:lw $a3, 28($a0)\n" |
| "lw $a2, 24($a0)\n" |
| "lw $a1, 20($a0)\n" |
| "lw $t0, 16($a0)\n" |
| "sw $a3, 28($sp)\n" |
| "sw $a2, 24($sp)\n" |
| "sw $a1, 20($sp)\n" |
| "sw $t0, 16($sp)\n" |
| "lw $a3, 12($a0)\n" |
| "lw $a2, 8($a0)\n" |
| "lw $a1, 4($a0)\n" |
| "lw $a0, 0($a0)\n" |
| // Enter the kernel |
| "syscall\n" |
| // This is our "magic" return address that the BPF filter sees. |
| // Restore the return address from the stack. |
| "2:lw $ra, 36($sp)\n" |
| "jr $ra\n" |
| " addiu $sp, $sp, 40\n" |
| ".set pop\n" |
| ".end SyscallAsm\n" |
| ".size SyscallAsm,.-SyscallAsm\n" |
| #elif defined(__mips64__) |
| ".text\n" |
| ".option pic2\n" |
| ".global SyscallAsm\n" |
| ".type SyscallAsm, @function\n" |
| "SyscallAsm:.ent SyscallAsm\n" |
| ".frame $sp, 16, $ra\n" |
| ".set push\n" |
| ".set noreorder\n" |
| "daddiu $sp, $sp, -16\n" |
| ".cpsetup $25, 0, SyscallAsm\n" |
| "sd $ra, 8($sp)\n" |
| // Check if "v0" is negative. If so, do not attempt to make a |
| // system call. Instead, compute the return address that is visible |
| // to the kernel after we execute "syscall". This address can be |
| // used as a marker that BPF code inspects. |
| "bgez $v0, 1f\n" |
| " nop\n" |
| // This is equivalent to "la $v0, 2f". |
| // LA macro has to be avoided since LLVM-AS has issue with LA in PIC mode |
| // https://llvm.org/bugs/show_bug.cgi?id=27644 |
| "ld $v0, %got(2f)($gp)\n" |
| "daddiu $v0, $v0, %lo(2f)\n" |
| "b 2f\n" |
| " nop\n" |
| // On MIPS N64 all eight arguments go to registers a0 - a7 |
| // We can go ahead and directly copy the entries from the arguments array |
| // into the appropriate CPU registers. |
| "1:ld $a7, 56($a0)\n" |
| "ld $a6, 48($a0)\n" |
| "ld $a5, 40($a0)\n" |
| "ld $a4, 32($a0)\n" |
| "ld $a3, 24($a0)\n" |
| "ld $a2, 16($a0)\n" |
| "ld $a1, 8($a0)\n" |
| "ld $a0, 0($a0)\n" |
| // Enter the kernel |
| "syscall\n" |
| // This is our "magic" return address that the BPF filter sees. |
| // Restore the return address from the stack. |
| "2:ld $ra, 8($sp)\n" |
| ".cpreturn\n" |
| "jr $ra\n" |
| "daddiu $sp, $sp, 16\n" |
| ".set pop\n" |
| ".end SyscallAsm\n" |
| ".size SyscallAsm,.-SyscallAsm\n" |
| #elif defined(__aarch64__) |
| ".text\n" |
| ".align 2\n" |
| ".type SyscallAsm, %function\n" |
| "SyscallAsm:\n" |
| ".cfi_startproc\n" |
| "cmp x0, #0\n" |
| "b.ge 1f\n" |
| "adr x0,2f\n" |
| "b 2f\n" |
| "1:ldr x5, [x6, #40]\n" |
| "ldr x4, [x6, #32]\n" |
| "ldr x3, [x6, #24]\n" |
| "ldr x2, [x6, #16]\n" |
| "ldr x1, [x6, #8]\n" |
| "mov x8, x0\n" |
| "ldr x0, [x6, #0]\n" |
| // Enter the kernel |
| "svc 0\n" |
| "2:ret\n" |
| ".cfi_endproc\n" |
| ".size SyscallAsm, .-SyscallAsm\n" |
| #endif |
| ); // asm |
| |
| #if defined(__x86_64__) |
| extern "C" { |
| intptr_t SyscallAsm(intptr_t nr, const intptr_t args[6]); |
| } |
| #elif defined(__mips__) |
| extern "C" { |
| intptr_t SyscallAsm(intptr_t nr, const intptr_t args[8]); |
| } |
| #endif |
| |
| } // namespace |
| |
| intptr_t Syscall::InvalidCall() { |
| // Explicitly pass eight zero arguments just in case. |
| return Call(kInvalidSyscallNumber, 0, 0, 0, 0, 0, 0, 0, 0); |
| } |
| |
| intptr_t Syscall::Call(int nr, |
| intptr_t p0, |
| intptr_t p1, |
| intptr_t p2, |
| intptr_t p3, |
| intptr_t p4, |
| intptr_t p5, |
| intptr_t p6, |
| intptr_t p7) { |
| // We rely on "intptr_t" to be the exact size as a "void *". This is |
| // typically true, but just in case, we add a check. The language |
| // specification allows platforms some leeway in cases, where |
| // "sizeof(void *)" is not the same as "sizeof(void (*)())". We expect |
| // that this would only be an issue for IA64, which we are currently not |
| // planning on supporting. And it is even possible that this would work |
| // on IA64, but for lack of actual hardware, I cannot test. |
| static_assert(sizeof(void*) == sizeof(intptr_t), |
| "pointer types and intptr_t must be exactly the same size"); |
| |
| // TODO(nedeljko): Enable use of more than six parameters on architectures |
| // where that makes sense. |
| #if defined(__mips__) |
| const intptr_t args[8] = {p0, p1, p2, p3, p4, p5, p6, p7}; |
| #else |
| DCHECK_EQ(p6, 0) << " Support for syscalls with more than six arguments not " |
| "added for this architecture"; |
| DCHECK_EQ(p7, 0) << " Support for syscalls with more than six arguments not " |
| "added for this architecture"; |
| const intptr_t args[6] = {p0, p1, p2, p3, p4, p5}; |
| #endif // defined(__mips__) |
| |
| // Invoke our file-scope assembly code. The constraints have been picked |
| // carefully to match what the rest of the assembly code expects in input, |
| // output, and clobbered registers. |
| #if defined(__i386__) |
| intptr_t ret = nr; |
| asm volatile( |
| "call SyscallAsm\n" |
| // N.B. These are not the calling conventions normally used by the ABI. |
| : "=a"(ret) |
| : "0"(ret), "D"(args) |
| : "cc", "esp", "memory", "ecx", "edx"); |
| #elif defined(__x86_64__) |
| intptr_t ret = SyscallAsm(nr, args); |
| #elif defined(__arm__) |
| intptr_t ret; |
| { |
| register intptr_t inout __asm__("r0") = nr; |
| register const intptr_t* data __asm__("r6") = args; |
| asm volatile( |
| "bl SyscallAsm\n" |
| // N.B. These are not the calling conventions normally used by the ABI. |
| : "=r"(inout) |
| : "0"(inout), "r"(data) |
| : "cc", |
| "lr", |
| "memory", |
| "r1", |
| "r2", |
| "r3", |
| "r4", |
| "r5" |
| #if !defined(__thumb__) |
| // In thumb mode, we cannot use "r7" as a general purpose register, as |
| // it is our frame pointer. We have to manually manage and preserve |
| // it. |
| // In ARM mode, we have a dedicated frame pointer register and "r7" is |
| // thus available as a general purpose register. We don't preserve it, |
| // but instead mark it as clobbered. |
| , |
| "r7" |
| #endif // !defined(__thumb__) |
| ); |
| ret = inout; |
| } |
| #elif defined(__mips__) |
| intptr_t err_status; |
| intptr_t ret = Syscall::SandboxSyscallRaw(nr, args, &err_status); |
| |
| if (err_status) { |
| // On error, MIPS returns errno from syscall instead of -errno. |
| // The purpose of this negation is for SandboxSyscall() to behave |
| // more like it would on other architectures. |
| ret = -ret; |
| } |
| #elif defined(__aarch64__) |
| intptr_t ret; |
| { |
| register intptr_t inout __asm__("x0") = nr; |
| register const intptr_t* data __asm__("x6") = args; |
| asm volatile("bl SyscallAsm\n" |
| : "=r"(inout) |
| : "0"(inout), "r"(data) |
| : "memory", "x1", "x2", "x3", "x4", "x5", "x8", "x30"); |
| ret = inout; |
| } |
| |
| #else |
| #error "Unimplemented architecture" |
| #endif |
| return ret; |
| } |
| |
| void Syscall::PutValueInUcontext(intptr_t ret_val, ucontext_t* ctx) { |
| #if defined(__mips__) |
| // Mips ABI states that on error a3 CPU register has non zero value and if |
| // there is no error, it should be zero. |
| if (ret_val <= -1 && ret_val >= -4095) { |
| // |ret_val| followes the Syscall::Call() convention of being -errno on |
| // errors. In order to write correct value to return register this sign |
| // needs to be changed back. |
| ret_val = -ret_val; |
| SECCOMP_PARM4(ctx) = 1; |
| } else |
| SECCOMP_PARM4(ctx) = 0; |
| #endif |
| SECCOMP_RESULT(ctx) = static_cast<greg_t>(ret_val); |
| } |
| |
| #if defined(__mips__) |
| intptr_t Syscall::SandboxSyscallRaw(int nr, |
| const intptr_t* args, |
| intptr_t* err_ret) { |
| register intptr_t ret __asm__("v0") = nr; |
| register intptr_t syscallasm __asm__("t9") = (intptr_t) &SyscallAsm; |
| // a3 register becomes non zero on error. |
| register intptr_t err_stat __asm__("a3") = 0; |
| { |
| register const intptr_t* data __asm__("a0") = args; |
| asm volatile( |
| "jalr $t9\n" |
| " nop\n" |
| : "=r"(ret), "=r"(err_stat) |
| : "0"(ret), |
| "r"(data), |
| "r"(syscallasm) |
| // a2 is in the clober list so inline assembly can not change its |
| // value. |
| : "memory", "ra", "a2"); |
| } |
| |
| // Set an error status so it can be used outside of this function |
| *err_ret = err_stat; |
| |
| return ret; |
| } |
| #endif // defined(__mips__) |
| |
| } // namespace sandbox |
