sandbox/linux/seccomp-bpf/syscall.cc - chromium/src.git - Git at Google

 // Copyright (c) 2012 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.

 #include "sandbox/linux/seccomp-bpf/syscall.h"

 #include <asm/unistd.h>
 #include <errno.h>

 #include "base/basictypes.h"
 #include "base/logging.h"
 #include "sandbox/linux/seccomp-bpf/linux_seccomp.h"

 namespace sandbox {

 namespace {

 #if defined(ARCH_CPU_X86_FAMILY) || defined(ARCH_CPU_ARM_FAMILY) || \
     defined(ARCH_CPU_MIPS_FAMILY)
 // Number that's not currently used by any Linux kernel ABIs.
 const int kInvalidSyscallNumber = 0x351d3;
 #else
 #error Unrecognized architecture
 #endif

 asm(// We need to be able to tell the kernel exactly where we made a
     // system call. The C++ compiler likes to sometimes clone or
     // inline code, which would inadvertently end up duplicating
     // the entry point.
     // "gcc" can suppress code duplication with suitable function
     // attributes, but "clang" doesn't have this ability.
     // The "clang" developer mailing list suggested that the correct
     // and portable solution is a file-scope assembly block.
     // N.B. We do mark our code as a proper function so that backtraces
     // work correctly. But we make absolutely no attempt to use the
     // ABI's calling conventions for passing arguments. We will only
     // ever be called from assembly code and thus can pick more
     // suitable calling conventions.
 #if defined(__i386__)
     ".text\n"
     ".align 16, 0x90\n"
     ".type SyscallAsm, @function\n"
     "SyscallAsm:.cfi_startproc\n"
     // Check if "%eax" is negative. If so, do not attempt to make a
     // system call. Instead, compute the return address that is visible
     // to the kernel after we execute "int $0x80". This address can be
     // used as a marker that BPF code inspects.
     "test %eax, %eax\n"
     "jge  1f\n"
     // Always, make sure that our code is position-independent, or
     // address space randomization might not work on i386. This means,
     // we can't use "lea", but instead have to rely on "call/pop".
     "call 0f;   .cfi_adjust_cfa_offset  4\n"
     "0:pop  %eax; .cfi_adjust_cfa_offset -4\n"
     "addl $2f-0b, %eax\n"
     "ret\n"
     // Save register that we don't want to clobber. On i386, we need to
     // save relatively aggressively, as there are a couple or registers
     // that are used internally (e.g. %ebx for position-independent
     // code, and %ebp for the frame pointer), and as we need to keep at
     // least a few registers available for the register allocator.
     "1:push %esi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset esi, 0\n"
     "push %edi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset edi, 0\n"
     "push %ebx; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebx, 0\n"
     "push %ebp; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebp, 0\n"
     // Copy entries from the array holding the arguments into the
     // correct CPU registers.
     "movl  0(%edi), %ebx\n"
     "movl  4(%edi), %ecx\n"
     "movl  8(%edi), %edx\n"
     "movl 12(%edi), %esi\n"
     "movl 20(%edi), %ebp\n"
     "movl 16(%edi), %edi\n"
     // Enter the kernel.
     "int  $0x80\n"
     // This is our "magic" return address that the BPF filter sees.
     "2:"
     // Restore any clobbered registers that we didn't declare to the
     // compiler.
     "pop  %ebp; .cfi_restore ebp; .cfi_adjust_cfa_offset -4\n"
     "pop  %ebx; .cfi_restore ebx; .cfi_adjust_cfa_offset -4\n"
     "pop  %edi; .cfi_restore edi; .cfi_adjust_cfa_offset -4\n"
     "pop  %esi; .cfi_restore esi; .cfi_adjust_cfa_offset -4\n"
     "ret\n"
     ".cfi_endproc\n"
     "9:.size SyscallAsm, 9b-SyscallAsm\n"
 #elif defined(__x86_64__)
     ".text\n"
     ".align 16, 0x90\n"
     ".type SyscallAsm, @function\n"
     "SyscallAsm:.cfi_startproc\n"
     // Check if "%rax" is negative. If so, do not attempt to make a
     // system call. Instead, compute the return address that is visible
     // to the kernel after we execute "syscall". This address can be
     // used as a marker that BPF code inspects.
     "test %rax, %rax\n"
     "jge  1f\n"
     // Always make sure that our code is position-independent, or the
     // linker will throw a hissy fit on x86-64.
     "call 0f;   .cfi_adjust_cfa_offset  8\n"
     "0:pop  %rax; .cfi_adjust_cfa_offset -8\n"
     "addq $2f-0b, %rax\n"
     "ret\n"
     // We declared all clobbered registers to the compiler. On x86-64,
     // there really isn't much of a problem with register pressure. So,
     // we can go ahead and directly copy the entries from the arguments
     // array into the appropriate CPU registers.
     "1:movq  0(%r12), %rdi\n"
     "movq  8(%r12), %rsi\n"
     "movq 16(%r12), %rdx\n"
     "movq 24(%r12), %r10\n"
     "movq 32(%r12), %r8\n"
     "movq 40(%r12), %r9\n"
     // Enter the kernel.
     "syscall\n"
     // This is our "magic" return address that the BPF filter sees.
     "2:ret\n"
     ".cfi_endproc\n"
     "9:.size SyscallAsm, 9b-SyscallAsm\n"
 #elif defined(__arm__)
     // Throughout this file, we use the same mode (ARM vs. thumb)
     // that the C++ compiler uses. This means, when transfering control
     // from C++ to assembly code, we do not need to switch modes (e.g.
     // by using the "bx" instruction). It also means that our assembly
     // code should not be invoked directly from code that lives in
     // other compilation units, as we don't bother implementing thumb
     // interworking. That's OK, as we don't make any of the assembly
     // symbols public. They are all local to this file.
     ".text\n"
     ".align 2\n"
     ".type SyscallAsm, %function\n"
 #if defined(__thumb__)
     ".thumb_func\n"
 #else
     ".arm\n"
 #endif
     "SyscallAsm:.fnstart\n"
     "@ args = 0, pretend = 0, frame = 8\n"
     "@ frame_needed = 1, uses_anonymous_args = 0\n"
 #if defined(__thumb__)
     ".cfi_startproc\n"
     "push {r7, lr}\n"
     ".cfi_offset 14, -4\n"
     ".cfi_offset  7, -8\n"
     "mov r7, sp\n"
     ".cfi_def_cfa_register 7\n"
     ".cfi_def_cfa_offset 8\n"
 #else
     "stmfd sp!, {fp, lr}\n"
     "add fp, sp, #4\n"
 #endif
     // Check if "r0" is negative. If so, do not attempt to make a
     // system call. Instead, compute the return address that is visible
     // to the kernel after we execute "swi 0". This address can be
     // used as a marker that BPF code inspects.
     "cmp r0, #0\n"
     "bge 1f\n"
     "adr r0, 2f\n"
     "b   2f\n"
     // We declared (almost) all clobbered registers to the compiler. On
     // ARM there is no particular register pressure. So, we can go
     // ahead and directly copy the entries from the arguments array
     // into the appropriate CPU registers.
     "1:ldr r5, [r6, #20]\n"
     "ldr r4, [r6, #16]\n"
     "ldr r3, [r6, #12]\n"
     "ldr r2, [r6, #8]\n"
     "ldr r1, [r6, #4]\n"
     "mov r7, r0\n"
     "ldr r0, [r6, #0]\n"
     // Enter the kernel
     "swi 0\n"
 // Restore the frame pointer. Also restore the program counter from
 // the link register; this makes us return to the caller.
 #if defined(__thumb__)
     "2:pop {r7, pc}\n"
     ".cfi_endproc\n"
 #else
     "2:ldmfd sp!, {fp, pc}\n"
 #endif
     ".fnend\n"
     "9:.size SyscallAsm, 9b-SyscallAsm\n"
 #elif defined(__mips__)
     ".text\n"
     ".align 4\n"
     ".type SyscallAsm, @function\n"
     "SyscallAsm:.ent SyscallAsm\n"
     ".frame  $sp, 40, $ra\n"
     ".set   push\n"
     ".set   noreorder\n"
     "addiu  $sp, $sp, -40\n"
     "sw     $ra, 36($sp)\n"
     // Check if "v0" is negative. If so, do not attempt to make a
     // system call. Instead, compute the return address that is visible
     // to the kernel after we execute "syscall". This address can be
     // used as a marker that BPF code inspects.
     "bgez   $v0, 1f\n"
     " nop\n"
     "la     $v0, 2f\n"
     "b      2f\n"
     " nop\n"
     // On MIPS first four arguments go to registers a0 - a3 and any
     // argument after that goes to stack. We can go ahead and directly
     // copy the entries from the arguments array into the appropriate
     // CPU registers and on the stack.
     "1:lw     $a3, 28($a0)\n"
     "lw     $a2, 24($a0)\n"
     "lw     $a1, 20($a0)\n"
     "lw     $t0, 16($a0)\n"
     "sw     $a3, 28($sp)\n"
     "sw     $a2, 24($sp)\n"
     "sw     $a1, 20($sp)\n"
     "sw     $t0, 16($sp)\n"
     "lw     $a3, 12($a0)\n"
     "lw     $a2, 8($a0)\n"
     "lw     $a1, 4($a0)\n"
     "lw     $a0, 0($a0)\n"
     // Enter the kernel
     "syscall\n"
     // This is our "magic" return address that the BPF filter sees.
     // Restore the return address from the stack.
     "2:lw     $ra, 36($sp)\n"
     "jr     $ra\n"
     " addiu  $sp, $sp, 40\n"
     ".set    pop\n"
     ".end    SyscallAsm\n"
     ".size   SyscallAsm,.-SyscallAsm\n"
 #elif defined(__aarch64__)
     ".text\n"
     ".align 2\n"
     ".type SyscallAsm, %function\n"
     "SyscallAsm:\n"
     ".cfi_startproc\n"
     "cmp x0, #0\n"
     "b.ge 1f\n"
     "adr x0,2f\n"
     "b 2f\n"
     "1:ldr x5, [x6, #40]\n"
     "ldr x4, [x6, #32]\n"
     "ldr x3, [x6, #24]\n"
     "ldr x2, [x6, #16]\n"
     "ldr x1, [x6, #8]\n"
     "mov x8, x0\n"
     "ldr x0, [x6, #0]\n"
     // Enter the kernel
     "svc 0\n"
     "2:ret\n"
     ".cfi_endproc\n"
     ".size SyscallAsm, .-SyscallAsm\n"
 #endif
     );  // asm

 }  // namespace

 intptr_t Syscall::InvalidCall() {
   // Explicitly pass eight zero arguments just in case.
   return Call(kInvalidSyscallNumber, 0, 0, 0, 0, 0, 0, 0, 0);
 }

 intptr_t Syscall::Call(int nr,
                        intptr_t p0,
                        intptr_t p1,
                        intptr_t p2,
                        intptr_t p3,
                        intptr_t p4,
                        intptr_t p5,
                        intptr_t p6,
                        intptr_t p7) {
   // We rely on "intptr_t" to be the exact size as a "void *". This is
   // typically true, but just in case, we add a check. The language
   // specification allows platforms some leeway in cases, where
   // "sizeof(void *)" is not the same as "sizeof(void (*)())". We expect
   // that this would only be an issue for IA64, which we are currently not
   // planning on supporting. And it is even possible that this would work
   // on IA64, but for lack of actual hardware, I cannot test.
   COMPILE_ASSERT(sizeof(void*) == sizeof(intptr_t),
                  pointer_types_and_intptr_must_be_exactly_the_same_size);

   // TODO(nedeljko): Enable use of more than six parameters on architectures
   //                 where that makes sense.
 #if defined(__mips__)
   const intptr_t args[8] = {p0, p1, p2, p3, p4, p5, p6, p7};
 #else
   DCHECK_EQ(p6, 0) << " Support for syscalls with more than six arguments not "
                       "added for this architecture";
   DCHECK_EQ(p7, 0) << " Support for syscalls with more than six arguments not "
                       "added for this architecture";
   const intptr_t args[6] = {p0, p1, p2, p3, p4, p5};
 #endif  // defined(__mips__)

 // Invoke our file-scope assembly code. The constraints have been picked
 // carefully to match what the rest of the assembly code expects in input,
 // output, and clobbered registers.
 #if defined(__i386__)
   intptr_t ret = nr;
   asm volatile(
       "call SyscallAsm\n"
       // N.B. These are not the calling conventions normally used by the ABI.
       : "=a"(ret)
       : "0"(ret), "D"(args)
       : "cc", "esp", "memory", "ecx", "edx");
 #elif defined(__x86_64__)
   intptr_t ret = nr;
   {
     register const intptr_t* data __asm__("r12") = args;
     asm volatile(
         "lea  -128(%%rsp), %%rsp\n"  // Avoid red zone.
         "call SyscallAsm\n"
         "lea  128(%%rsp), %%rsp\n"
         // N.B. These are not the calling conventions normally used by the ABI.
         : "=a"(ret)
         : "0"(ret), "r"(data)
         : "cc",
           "rsp",
           "memory",
           "rcx",
           "rdi",
           "rsi",
           "rdx",
           "r8",
           "r9",
           "r10",
           "r11");
   }
 #elif defined(__arm__)
   intptr_t ret;
   {
     register intptr_t inout __asm__("r0") = nr;
     register const intptr_t* data __asm__("r6") = args;
     asm volatile(
         "bl SyscallAsm\n"
         // N.B. These are not the calling conventions normally used by the ABI.
         : "=r"(inout)
         : "0"(inout), "r"(data)
         : "cc",
           "lr",
           "memory",
           "r1",
           "r2",
           "r3",
           "r4",
           "r5"
 #if !defined(__thumb__)
           // In thumb mode, we cannot use "r7" as a general purpose register, as
           // it is our frame pointer. We have to manually manage and preserve
           // it.
           // In ARM mode, we have a dedicated frame pointer register and "r7" is
           // thus available as a general purpose register. We don't preserve it,
           // but instead mark it as clobbered.
           ,
           "r7"
 #endif  // !defined(__thumb__)
         );
     ret = inout;
   }
 #elif defined(__mips__)
   int err_status;
   intptr_t ret = Syscall::SandboxSyscallRaw(nr, args, &err_status);

   if (err_status) {
     // On error, MIPS returns errno from syscall instead of -errno.
     // The purpose of this negation is for SandboxSyscall() to behave
     // more like it would on other architectures.
     ret = -ret;
   }
 #elif defined(__aarch64__)
   intptr_t ret;
   {
     register intptr_t inout __asm__("x0") = nr;
     register const intptr_t* data __asm__("x6") = args;
     asm volatile("bl SyscallAsm\n"
                  : "=r"(inout)
                  : "0"(inout), "r"(data)
                  : "memory", "x1", "x2", "x3", "x4", "x5", "x8", "x30");
     ret = inout;
   }

 #else
 #error "Unimplemented architecture"
 #endif
   return ret;
 }

 void Syscall::PutValueInUcontext(intptr_t ret_val, ucontext_t* ctx) {
 #if defined(__mips__)
   // Mips ABI states that on error a3 CPU register has non zero value and if
   // there is no error, it should be zero.
   if (ret_val <= -1 && ret_val >= -4095) {
     // |ret_val| followes the Syscall::Call() convention of being -errno on
     // errors. In order to write correct value to return register this sign
     // needs to be changed back.
     ret_val = -ret_val;
     SECCOMP_PARM4(ctx) = 1;
   } else
     SECCOMP_PARM4(ctx) = 0;
 #endif
   SECCOMP_RESULT(ctx) = static_cast<greg_t>(ret_val);
 }

 #if defined(__mips__)
 intptr_t Syscall::SandboxSyscallRaw(int nr,
                                     const intptr_t* args,
                                     intptr_t* err_ret) {
   register intptr_t ret __asm__("v0") = nr;
   // a3 register becomes non zero on error.
   register intptr_t err_stat __asm__("a3") = 0;
   {
     register const intptr_t* data __asm__("a0") = args;
     asm volatile(
         "la $t9, SyscallAsm\n"
         "jalr $t9\n"
         " nop\n"
         : "=r"(ret), "=r"(err_stat)
         : "0"(ret),
           "r"(data)
           // a2 is in the clober list so inline assembly can not change its
           // value.
         : "memory", "ra", "t9", "a2");
   }

   // Set an error status so it can be used outside of this function
   *err_ret = err_stat;

   return ret;
 }
 #endif  // defined(__mips__)

 }  // namespace sandbox
	// Copyright (c) 2012 The Chromium Authors. All rights reserved.
	// Use of this source code is governed by a BSD-style license that can be
	// found in the LICENSE file.

	#include "sandbox/linux/seccomp-bpf/syscall.h"

	#include <asm/unistd.h>
	#include <errno.h>

	#include "base/basictypes.h"
	#include "base/logging.h"
	#include "sandbox/linux/seccomp-bpf/linux_seccomp.h"

	namespace sandbox {

	namespace {

	#if defined(ARCH_CPU_X86_FAMILY) \|\| defined(ARCH_CPU_ARM_FAMILY) \|\| \
	defined(ARCH_CPU_MIPS_FAMILY)
	// Number that's not currently used by any Linux kernel ABIs.
	const int kInvalidSyscallNumber = 0x351d3;
	#else
	#error Unrecognized architecture
	#endif

	asm(// We need to be able to tell the kernel exactly where we made a
	// system call. The C++ compiler likes to sometimes clone or
	// inline code, which would inadvertently end up duplicating
	// the entry point.
	// "gcc" can suppress code duplication with suitable function
	// attributes, but "clang" doesn't have this ability.
	// The "clang" developer mailing list suggested that the correct
	// and portable solution is a file-scope assembly block.
	// N.B. We do mark our code as a proper function so that backtraces
	// work correctly. But we make absolutely no attempt to use the
	// ABI's calling conventions for passing arguments. We will only
	// ever be called from assembly code and thus can pick more
	// suitable calling conventions.
	#if defined(__i386__)
	".text\n"
	".align 16, 0x90\n"
	".type SyscallAsm, @function\n"
	"SyscallAsm:.cfi_startproc\n"
	// Check if "%eax" is negative. If so, do not attempt to make a
	// system call. Instead, compute the return address that is visible
	// to the kernel after we execute "int $0x80". This address can be
	// used as a marker that BPF code inspects.
	"test %eax, %eax\n"
	"jge 1f\n"
	// Always, make sure that our code is position-independent, or
	// address space randomization might not work on i386. This means,
	// we can't use "lea", but instead have to rely on "call/pop".
	"call 0f; .cfi_adjust_cfa_offset 4\n"
	"0:pop %eax; .cfi_adjust_cfa_offset -4\n"
	"addl $2f-0b, %eax\n"
	"ret\n"
	// Save register that we don't want to clobber. On i386, we need to
	// save relatively aggressively, as there are a couple or registers
	// that are used internally (e.g. %ebx for position-independent
	// code, and %ebp for the frame pointer), and as we need to keep at
	// least a few registers available for the register allocator.
	"1:push %esi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset esi, 0\n"
	"push %edi; .cfi_adjust_cfa_offset 4; .cfi_rel_offset edi, 0\n"
	"push %ebx; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebx, 0\n"
	"push %ebp; .cfi_adjust_cfa_offset 4; .cfi_rel_offset ebp, 0\n"
	// Copy entries from the array holding the arguments into the
	// correct CPU registers.
	"movl 0(%edi), %ebx\n"
	"movl 4(%edi), %ecx\n"
	"movl 8(%edi), %edx\n"
	"movl 12(%edi), %esi\n"
	"movl 20(%edi), %ebp\n"
	"movl 16(%edi), %edi\n"
	// Enter the kernel.
	"int $0x80\n"
	// This is our "magic" return address that the BPF filter sees.
	"2:"
	// Restore any clobbered registers that we didn't declare to the
	// compiler.
	"pop %ebp; .cfi_restore ebp; .cfi_adjust_cfa_offset -4\n"
	"pop %ebx; .cfi_restore ebx; .cfi_adjust_cfa_offset -4\n"
	"pop %edi; .cfi_restore edi; .cfi_adjust_cfa_offset -4\n"
	"pop %esi; .cfi_restore esi; .cfi_adjust_cfa_offset -4\n"
	"ret\n"
	".cfi_endproc\n"
	"9:.size SyscallAsm, 9b-SyscallAsm\n"
	#elif defined(__x86_64__)
	".text\n"
	".align 16, 0x90\n"
	".type SyscallAsm, @function\n"
	"SyscallAsm:.cfi_startproc\n"
	// Check if "%rax" is negative. If so, do not attempt to make a
	// system call. Instead, compute the return address that is visible
	// to the kernel after we execute "syscall". This address can be
	// used as a marker that BPF code inspects.
	"test %rax, %rax\n"
	"jge 1f\n"
	// Always make sure that our code is position-independent, or the
	// linker will throw a hissy fit on x86-64.
	"call 0f; .cfi_adjust_cfa_offset 8\n"
	"0:pop %rax; .cfi_adjust_cfa_offset -8\n"
	"addq $2f-0b, %rax\n"
	"ret\n"
	// We declared all clobbered registers to the compiler. On x86-64,
	// there really isn't much of a problem with register pressure. So,
	// we can go ahead and directly copy the entries from the arguments
	// array into the appropriate CPU registers.
	"1:movq 0(%r12), %rdi\n"
	"movq 8(%r12), %rsi\n"
	"movq 16(%r12), %rdx\n"
	"movq 24(%r12), %r10\n"
	"movq 32(%r12), %r8\n"
	"movq 40(%r12), %r9\n"
	// Enter the kernel.
	"syscall\n"
	// This is our "magic" return address that the BPF filter sees.
	"2:ret\n"
	".cfi_endproc\n"
	"9:.size SyscallAsm, 9b-SyscallAsm\n"
	#elif defined(__arm__)
	// Throughout this file, we use the same mode (ARM vs. thumb)
	// that the C++ compiler uses. This means, when transfering control
	// from C++ to assembly code, we do not need to switch modes (e.g.
	// by using the "bx" instruction). It also means that our assembly
	// code should not be invoked directly from code that lives in
	// other compilation units, as we don't bother implementing thumb
	// interworking. That's OK, as we don't make any of the assembly
	// symbols public. They are all local to this file.
	".text\n"
	".align 2\n"
	".type SyscallAsm, %function\n"
	#if defined(__thumb__)
	".thumb_func\n"
	#else
	".arm\n"
	#endif
	"SyscallAsm:.fnstart\n"
	"@ args = 0, pretend = 0, frame = 8\n"
	"@ frame_needed = 1, uses_anonymous_args = 0\n"
	#if defined(__thumb__)
	".cfi_startproc\n"
	"push {r7, lr}\n"
	".cfi_offset 14, -4\n"
	".cfi_offset 7, -8\n"
	"mov r7, sp\n"
	".cfi_def_cfa_register 7\n"
	".cfi_def_cfa_offset 8\n"
	#else
	"stmfd sp!, {fp, lr}\n"
	"add fp, sp, #4\n"
	#endif
	// Check if "r0" is negative. If so, do not attempt to make a
	// system call. Instead, compute the return address that is visible
	// to the kernel after we execute "swi 0". This address can be
	// used as a marker that BPF code inspects.
	"cmp r0, #0\n"
	"bge 1f\n"
	"adr r0, 2f\n"
	"b 2f\n"
	// We declared (almost) all clobbered registers to the compiler. On
	// ARM there is no particular register pressure. So, we can go
	// ahead and directly copy the entries from the arguments array
	// into the appropriate CPU registers.
	"1:ldr r5, [r6, #20]\n"
	"ldr r4, [r6, #16]\n"
	"ldr r3, [r6, #12]\n"
	"ldr r2, [r6, #8]\n"
	"ldr r1, [r6, #4]\n"
	"mov r7, r0\n"
	"ldr r0, [r6, #0]\n"
	// Enter the kernel
	"swi 0\n"
	// Restore the frame pointer. Also restore the program counter from
	// the link register; this makes us return to the caller.
	#if defined(__thumb__)
	"2:pop {r7, pc}\n"
	".cfi_endproc\n"
	#else
	"2:ldmfd sp!, {fp, pc}\n"
	#endif
	".fnend\n"
	"9:.size SyscallAsm, 9b-SyscallAsm\n"
	#elif defined(__mips__)
	".text\n"
	".align 4\n"
	".type SyscallAsm, @function\n"
	"SyscallAsm:.ent SyscallAsm\n"
	".frame $sp, 40, $ra\n"
	".set push\n"
	".set noreorder\n"
	"addiu $sp, $sp, -40\n"
	"sw $ra, 36($sp)\n"
	// Check if "v0" is negative. If so, do not attempt to make a
	// system call. Instead, compute the return address that is visible
	// to the kernel after we execute "syscall". This address can be
	// used as a marker that BPF code inspects.
	"bgez $v0, 1f\n"
	" nop\n"
	"la $v0, 2f\n"
	"b 2f\n"
	" nop\n"
	// On MIPS first four arguments go to registers a0 - a3 and any
	// argument after that goes to stack. We can go ahead and directly
	// copy the entries from the arguments array into the appropriate
	// CPU registers and on the stack.
	"1:lw $a3, 28($a0)\n"
	"lw $a2, 24($a0)\n"
	"lw $a1, 20($a0)\n"
	"lw $t0, 16($a0)\n"
	"sw $a3, 28($sp)\n"
	"sw $a2, 24($sp)\n"
	"sw $a1, 20($sp)\n"
	"sw $t0, 16($sp)\n"
	"lw $a3, 12($a0)\n"
	"lw $a2, 8($a0)\n"
	"lw $a1, 4($a0)\n"
	"lw $a0, 0($a0)\n"
	// Enter the kernel
	"syscall\n"
	// This is our "magic" return address that the BPF filter sees.
	// Restore the return address from the stack.
	"2:lw $ra, 36($sp)\n"
	"jr $ra\n"
	" addiu $sp, $sp, 40\n"
	".set pop\n"
	".end SyscallAsm\n"
	".size SyscallAsm,.-SyscallAsm\n"
	#elif defined(__aarch64__)
	".text\n"
	".align 2\n"
	".type SyscallAsm, %function\n"
	"SyscallAsm:\n"
	".cfi_startproc\n"
	"cmp x0, #0\n"
	"b.ge 1f\n"
	"adr x0,2f\n"
	"b 2f\n"
	"1:ldr x5, [x6, #40]\n"
	"ldr x4, [x6, #32]\n"
	"ldr x3, [x6, #24]\n"
	"ldr x2, [x6, #16]\n"
	"ldr x1, [x6, #8]\n"
	"mov x8, x0\n"
	"ldr x0, [x6, #0]\n"
	// Enter the kernel
	"svc 0\n"
	"2:ret\n"
	".cfi_endproc\n"
	".size SyscallAsm, .-SyscallAsm\n"
	#endif
	); // asm

	} // namespace

	intptr_t Syscall::InvalidCall() {
	// Explicitly pass eight zero arguments just in case.
	return Call(kInvalidSyscallNumber, 0, 0, 0, 0, 0, 0, 0, 0);
	}

	intptr_t Syscall::Call(int nr,
	intptr_t p0,
	intptr_t p1,
	intptr_t p2,
	intptr_t p3,
	intptr_t p4,
	intptr_t p5,
	intptr_t p6,
	intptr_t p7) {
	// We rely on "intptr_t" to be the exact size as a "void *". This is
	// typically true, but just in case, we add a check. The language
	// specification allows platforms some leeway in cases, where
	// "sizeof(void )" is not the same as "sizeof(void ()())". We expect
	// that this would only be an issue for IA64, which we are currently not
	// planning on supporting. And it is even possible that this would work
	// on IA64, but for lack of actual hardware, I cannot test.
	COMPILE_ASSERT(sizeof(void*) == sizeof(intptr_t),
	pointer_types_and_intptr_must_be_exactly_the_same_size);

	// TODO(nedeljko): Enable use of more than six parameters on architectures
	// where that makes sense.
	#if defined(__mips__)
	const intptr_t args[8] = {p0, p1, p2, p3, p4, p5, p6, p7};
	#else
	DCHECK_EQ(p6, 0) << " Support for syscalls with more than six arguments not "
	"added for this architecture";
	DCHECK_EQ(p7, 0) << " Support for syscalls with more than six arguments not "
	"added for this architecture";
	const intptr_t args[6] = {p0, p1, p2, p3, p4, p5};
	#endif // defined(__mips__)

	// Invoke our file-scope assembly code. The constraints have been picked
	// carefully to match what the rest of the assembly code expects in input,
	// output, and clobbered registers.
	#if defined(__i386__)
	intptr_t ret = nr;
	asm volatile(
	"call SyscallAsm\n"
	// N.B. These are not the calling conventions normally used by the ABI.
	: "=a"(ret)
	: "0"(ret), "D"(args)
	: "cc", "esp", "memory", "ecx", "edx");
	#elif defined(__x86_64__)
	intptr_t ret = nr;
	{
	register const intptr_t* data __asm__("r12") = args;
	asm volatile(
	"lea -128(%%rsp), %%rsp\n" // Avoid red zone.
	"call SyscallAsm\n"
	"lea 128(%%rsp), %%rsp\n"
	// N.B. These are not the calling conventions normally used by the ABI.
	: "=a"(ret)
	: "0"(ret), "r"(data)
	: "cc",
	"rsp",
	"memory",
	"rcx",
	"rdi",
	"rsi",
	"rdx",
	"r8",
	"r9",
	"r10",
	"r11");
	}
	#elif defined(__arm__)
	intptr_t ret;
	{
	register intptr_t inout __asm__("r0") = nr;
	register const intptr_t* data __asm__("r6") = args;
	asm volatile(
	"bl SyscallAsm\n"
	// N.B. These are not the calling conventions normally used by the ABI.
	: "=r"(inout)
	: "0"(inout), "r"(data)
	: "cc",
	"lr",
	"memory",
	"r1",
	"r2",
	"r3",
	"r4",
	"r5"
	#if !defined(__thumb__)
	// In thumb mode, we cannot use "r7" as a general purpose register, as
	// it is our frame pointer. We have to manually manage and preserve
	// it.
	// In ARM mode, we have a dedicated frame pointer register and "r7" is
	// thus available as a general purpose register. We don't preserve it,
	// but instead mark it as clobbered.
	,
	"r7"
	#endif // !defined(__thumb__)
	);
	ret = inout;
	}
	#elif defined(__mips__)
	int err_status;
	intptr_t ret = Syscall::SandboxSyscallRaw(nr, args, &err_status);

	if (err_status) {
	// On error, MIPS returns errno from syscall instead of -errno.
	// The purpose of this negation is for SandboxSyscall() to behave
	// more like it would on other architectures.
	ret = -ret;
	}
	#elif defined(__aarch64__)
	intptr_t ret;
	{
	register intptr_t inout __asm__("x0") = nr;
	register const intptr_t* data __asm__("x6") = args;
	asm volatile("bl SyscallAsm\n"
	: "=r"(inout)
	: "0"(inout), "r"(data)
	: "memory", "x1", "x2", "x3", "x4", "x5", "x8", "x30");
	ret = inout;
	}

	#else
	#error "Unimplemented architecture"
	#endif
	return ret;
	}

	void Syscall::PutValueInUcontext(intptr_t ret_val, ucontext_t* ctx) {
	#if defined(__mips__)
	// Mips ABI states that on error a3 CPU register has non zero value and if
	// there is no error, it should be zero.
	if (ret_val <= -1 && ret_val >= -4095) {
	// \|ret_val\| followes the Syscall::Call() convention of being -errno on
	// errors. In order to write correct value to return register this sign
	// needs to be changed back.
	ret_val = -ret_val;
	SECCOMP_PARM4(ctx) = 1;
	} else
	SECCOMP_PARM4(ctx) = 0;
	#endif
	SECCOMP_RESULT(ctx) = static_cast<greg_t>(ret_val);
	}

	#if defined(__mips__)
	intptr_t Syscall::SandboxSyscallRaw(int nr,
	const intptr_t* args,
	intptr_t* err_ret) {
	register intptr_t ret __asm__("v0") = nr;
	// a3 register becomes non zero on error.
	register intptr_t err_stat __asm__("a3") = 0;
	{
	register const intptr_t* data __asm__("a0") = args;
	asm volatile(
	"la $t9, SyscallAsm\n"
	"jalr $t9\n"
	" nop\n"
	: "=r"(ret), "=r"(err_stat)
	: "0"(ret),
	"r"(data)
	// a2 is in the clober list so inline assembly can not change its
	// value.
	: "memory", "ra", "t9", "a2");
	}

	// Set an error status so it can be used outside of this function
	*err_ret = err_stat;

	return ret;
	}
	#endif // defined(__mips__)

	} // namespace sandbox