| /* libs/graphics/sgl/SkPath.cpp |
| ** |
| ** Copyright 2006, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| |
| #include "SkPath.h" |
| #include "SkFlattenable.h" |
| #include "SkMath.h" |
| |
| //////////////////////////////////////////////////////////////////////////// |
| |
| /* This guy's constructor/destructor bracket a path editing operation. It is |
| used when we know the bounds of the amount we are going to add to the path |
| (usually a new contour, but not required). |
| |
| It captures some state about the path up front (i.e. if it already has a |
| cached bounds), and the if it can, it updates the cache bounds explicitly, |
| avoiding the need to revisit all of the points in computeBounds(). |
| */ |
| class SkAutoPathBoundsUpdate { |
| public: |
| SkAutoPathBoundsUpdate(SkPath* path, const SkRect& r) : fRect(r) { |
| this->init(path); |
| } |
| |
| SkAutoPathBoundsUpdate(SkPath* path, SkScalar left, SkScalar top, |
| SkScalar right, SkScalar bottom) { |
| fRect.set(left, top, right, bottom); |
| this->init(path); |
| } |
| |
| ~SkAutoPathBoundsUpdate() { |
| if (fEmpty) { |
| fPath->fFastBounds = fRect; |
| fPath->fFastBoundsIsDirty = false; |
| } else if (!fDirty) { |
| fPath->fFastBounds.join(fRect); |
| fPath->fFastBoundsIsDirty = false; |
| } |
| } |
| |
| private: |
| const SkPath* fPath; |
| SkRect fRect; |
| bool fDirty; |
| bool fEmpty; |
| |
| // returns true if we should proceed |
| void init(const SkPath* path) { |
| fPath = path; |
| fDirty = path->fFastBoundsIsDirty; |
| fEmpty = path->isEmpty(); |
| } |
| }; |
| |
| static void compute_fast_bounds(SkRect* bounds, const SkTDArray<SkPoint>& pts) { |
| if (pts.count() <= 1) { // we ignore just 1 point (moveto) |
| bounds->set(0, 0, 0, 0); |
| } else { |
| bounds->set(pts.begin(), pts.count()); |
| // SkDebugf("------- compute bounds %p %d", &pts, pts.count()); |
| } |
| } |
| |
| //////////////////////////////////////////////////////////////////////////// |
| |
| /* |
| Stores the verbs and points as they are given to us, with exceptions: |
| - we only record "Close" if it was immediately preceeded by Line | Quad | Cubic |
| - we insert a Move(0,0) if Line | Quad | Cubic is our first command |
| |
| The iterator does more cleanup, especially if forceClose == true |
| 1. if we encounter Close, return a cons'd up Line() first (if the curr-pt != start-pt) |
| 2. if we encounter Move without a preceeding Close, and forceClose is true, goto #1 |
| 3. if we encounter Line | Quad | Cubic after Close, cons up a Move |
| */ |
| |
| //////////////////////////////////////////////////////////////////////////// |
| |
| SkPath::SkPath() : fFastBoundsIsDirty(true), fFillType(kWinding_FillType) {} |
| |
| SkPath::SkPath(const SkPath& src) { |
| SkDEBUGCODE(src.validate();) |
| *this = src; |
| } |
| |
| SkPath::~SkPath() { |
| SkDEBUGCODE(this->validate();) |
| } |
| |
| SkPath& SkPath::operator=(const SkPath& src) { |
| SkDEBUGCODE(src.validate();) |
| |
| if (this != &src) { |
| fFastBounds = src.fFastBounds; |
| fPts = src.fPts; |
| fVerbs = src.fVerbs; |
| fFillType = src.fFillType; |
| fFastBoundsIsDirty = src.fFastBoundsIsDirty; |
| } |
| SkDEBUGCODE(this->validate();) |
| return *this; |
| } |
| |
| void SkPath::swap(SkPath& other) { |
| SkASSERT(&other != NULL); |
| |
| if (this != &other) { |
| SkTSwap<SkRect>(fFastBounds, other.fFastBounds); |
| fPts.swap(other.fPts); |
| fVerbs.swap(other.fVerbs); |
| SkTSwap<uint8_t>(fFillType, other.fFillType); |
| SkTSwap<uint8_t>(fFastBoundsIsDirty, other.fFastBoundsIsDirty); |
| } |
| } |
| |
| void SkPath::reset() { |
| SkDEBUGCODE(this->validate();) |
| |
| fPts.reset(); |
| fVerbs.reset(); |
| fFastBoundsIsDirty = true; |
| } |
| |
| void SkPath::rewind() { |
| SkDEBUGCODE(this->validate();) |
| |
| fPts.rewind(); |
| fVerbs.rewind(); |
| fFastBoundsIsDirty = true; |
| } |
| |
| bool SkPath::isEmpty() const { |
| SkDEBUGCODE(this->validate();) |
| |
| int count = fVerbs.count(); |
| return count == 0 || (count == 1 && fVerbs[0] == kMove_Verb); |
| } |
| |
| bool SkPath::isRect(SkRect*) const { |
| SkDEBUGCODE(this->validate();) |
| |
| SkASSERT(!"unimplemented"); |
| return false; |
| } |
| |
| int SkPath::getPoints(SkPoint copy[], int max) const { |
| SkDEBUGCODE(this->validate();) |
| |
| SkASSERT(max >= 0); |
| int count = fPts.count(); |
| if (copy && max > 0 && count > 0) { |
| memcpy(copy, fPts.begin(), sizeof(SkPoint) * SkMin32(max, count)); |
| } |
| return count; |
| } |
| |
| void SkPath::getLastPt(SkPoint* lastPt) const { |
| SkDEBUGCODE(this->validate();) |
| |
| if (lastPt) { |
| int count = fPts.count(); |
| if (count == 0) { |
| lastPt->set(0, 0); |
| } else { |
| *lastPt = fPts[count - 1]; |
| } |
| } |
| } |
| |
| void SkPath::setLastPt(SkScalar x, SkScalar y) { |
| SkDEBUGCODE(this->validate();) |
| |
| int count = fPts.count(); |
| if (count == 0) { |
| this->moveTo(x, y); |
| } else { |
| fPts[count - 1].set(x, y); |
| } |
| } |
| |
| #define ALWAYS_FAST_BOUNDS_FOR_NOW true |
| |
| void SkPath::computeBounds(SkRect* bounds, BoundsType bt) const { |
| SkDEBUGCODE(this->validate();) |
| |
| SkASSERT(bounds); |
| |
| // we BoundsType for now |
| |
| if (fFastBoundsIsDirty) { |
| fFastBoundsIsDirty = false; |
| compute_fast_bounds(&fFastBounds, fPts); |
| } |
| *bounds = fFastBounds; |
| } |
| |
| ////////////////////////////////////////////////////////////////////////////// |
| // Construction methods |
| |
| void SkPath::incReserve(U16CPU inc) { |
| SkDEBUGCODE(this->validate();) |
| |
| fVerbs.setReserve(fVerbs.count() + inc); |
| fPts.setReserve(fPts.count() + inc); |
| |
| SkDEBUGCODE(this->validate();) |
| } |
| |
| void SkPath::moveTo(SkScalar x, SkScalar y) { |
| SkDEBUGCODE(this->validate();) |
| |
| int vc = fVerbs.count(); |
| SkPoint* pt; |
| |
| if (vc > 0 && fVerbs[vc - 1] == kMove_Verb) { |
| pt = &fPts[fPts.count() - 1]; |
| } else { |
| pt = fPts.append(); |
| *fVerbs.append() = kMove_Verb; |
| } |
| pt->set(x, y); |
| |
| fFastBoundsIsDirty = true; |
| } |
| |
| void SkPath::rMoveTo(SkScalar x, SkScalar y) { |
| SkPoint pt; |
| this->getLastPt(&pt); |
| this->moveTo(pt.fX + x, pt.fY + y); |
| } |
| |
| void SkPath::lineTo(SkScalar x, SkScalar y) { |
| SkDEBUGCODE(this->validate();) |
| |
| if (fVerbs.count() == 0) { |
| fPts.append()->set(0, 0); |
| *fVerbs.append() = kMove_Verb; |
| } |
| fPts.append()->set(x, y); |
| *fVerbs.append() = kLine_Verb; |
| |
| fFastBoundsIsDirty = true; |
| } |
| |
| void SkPath::rLineTo(SkScalar x, SkScalar y) { |
| SkPoint pt; |
| this->getLastPt(&pt); |
| this->lineTo(pt.fX + x, pt.fY + y); |
| } |
| |
| void SkPath::quadTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2) { |
| SkDEBUGCODE(this->validate();) |
| |
| if (fVerbs.count() == 0) { |
| fPts.append()->set(0, 0); |
| *fVerbs.append() = kMove_Verb; |
| } |
| |
| SkPoint* pts = fPts.append(2); |
| pts[0].set(x1, y1); |
| pts[1].set(x2, y2); |
| *fVerbs.append() = kQuad_Verb; |
| |
| fFastBoundsIsDirty = true; |
| } |
| |
| void SkPath::rQuadTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2) { |
| SkPoint pt; |
| this->getLastPt(&pt); |
| this->quadTo(pt.fX + x1, pt.fY + y1, pt.fX + x2, pt.fY + y2); |
| } |
| |
| void SkPath::cubicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2, |
| SkScalar x3, SkScalar y3) { |
| SkDEBUGCODE(this->validate();) |
| |
| if (fVerbs.count() == 0) { |
| fPts.append()->set(0, 0); |
| *fVerbs.append() = kMove_Verb; |
| } |
| SkPoint* pts = fPts.append(3); |
| pts[0].set(x1, y1); |
| pts[1].set(x2, y2); |
| pts[2].set(x3, y3); |
| *fVerbs.append() = kCubic_Verb; |
| |
| fFastBoundsIsDirty = true; |
| } |
| |
| void SkPath::rCubicTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2, |
| SkScalar x3, SkScalar y3) { |
| SkPoint pt; |
| this->getLastPt(&pt); |
| this->cubicTo(pt.fX + x1, pt.fY + y1, pt.fX + x2, pt.fY + y2, |
| pt.fX + x3, pt.fY + y3); |
| } |
| |
| void SkPath::close() { |
| SkDEBUGCODE(this->validate();) |
| |
| int count = fVerbs.count(); |
| if (count > 0) { |
| switch (fVerbs[count - 1]) { |
| case kLine_Verb: |
| case kQuad_Verb: |
| case kCubic_Verb: |
| *fVerbs.append() = kClose_Verb; |
| break; |
| default: |
| // don't add a close if the prev wasn't a primitive |
| break; |
| } |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkPath::addRect(const SkRect& rect, Direction dir) { |
| this->addRect(rect.fLeft, rect.fTop, rect.fRight, rect.fBottom, dir); |
| } |
| |
| void SkPath::addRect(SkScalar left, SkScalar top, SkScalar right, |
| SkScalar bottom, Direction dir) { |
| SkAutoPathBoundsUpdate apbu(this, left, top, right, bottom); |
| |
| this->incReserve(5); |
| |
| this->moveTo(left, top); |
| if (dir == kCCW_Direction) { |
| this->lineTo(left, bottom); |
| this->lineTo(right, bottom); |
| this->lineTo(right, top); |
| } else { |
| this->lineTo(right, top); |
| this->lineTo(right, bottom); |
| this->lineTo(left, bottom); |
| } |
| this->close(); |
| } |
| |
| #define CUBIC_ARC_FACTOR ((SK_ScalarSqrt2 - SK_Scalar1) * 4 / 3) |
| |
| void SkPath::addRoundRect(const SkRect& rect, SkScalar rx, SkScalar ry, |
| Direction dir) { |
| SkAutoPathBoundsUpdate apbu(this, rect); |
| |
| SkScalar w = rect.width(); |
| SkScalar halfW = SkScalarHalf(w); |
| SkScalar h = rect.height(); |
| SkScalar halfH = SkScalarHalf(h); |
| |
| if (halfW <= 0 || halfH <= 0) { |
| return; |
| } |
| |
| bool skip_hori = rx >= halfW; |
| bool skip_vert = ry >= halfH; |
| |
| if (skip_hori && skip_vert) { |
| this->addOval(rect, dir); |
| return; |
| } |
| if (skip_hori) { |
| rx = halfW; |
| } else if (skip_vert) { |
| ry = halfH; |
| } |
| |
| SkScalar sx = SkScalarMul(rx, CUBIC_ARC_FACTOR); |
| SkScalar sy = SkScalarMul(ry, CUBIC_ARC_FACTOR); |
| |
| this->incReserve(17); |
| this->moveTo(rect.fRight - rx, rect.fTop); |
| if (dir == kCCW_Direction) { |
| if (!skip_hori) { |
| this->lineTo(rect.fLeft + rx, rect.fTop); // top |
| } |
| this->cubicTo(rect.fLeft + rx - sx, rect.fTop, |
| rect.fLeft, rect.fTop + ry - sy, |
| rect.fLeft, rect.fTop + ry); // top-left |
| if (!skip_vert) { |
| this->lineTo(rect.fLeft, rect.fBottom - ry); // left |
| } |
| this->cubicTo(rect.fLeft, rect.fBottom - ry + sy, |
| rect.fLeft + rx - sx, rect.fBottom, |
| rect.fLeft + rx, rect.fBottom); // bot-left |
| if (!skip_hori) { |
| this->lineTo(rect.fRight - rx, rect.fBottom); // bottom |
| } |
| this->cubicTo(rect.fRight - rx + sx, rect.fBottom, |
| rect.fRight, rect.fBottom - ry + sy, |
| rect.fRight, rect.fBottom - ry); // bot-right |
| if (!skip_vert) { |
| this->lineTo(rect.fRight, rect.fTop + ry); |
| } |
| this->cubicTo(rect.fRight, rect.fTop + ry - sy, |
| rect.fRight - rx + sx, rect.fTop, |
| rect.fRight - rx, rect.fTop); // top-right |
| } else { |
| this->cubicTo(rect.fRight - rx + sx, rect.fTop, |
| rect.fRight, rect.fTop + ry - sy, |
| rect.fRight, rect.fTop + ry); // top-right |
| if (!skip_vert) { |
| this->lineTo(rect.fRight, rect.fBottom - ry); |
| } |
| this->cubicTo(rect.fRight, rect.fBottom - ry + sy, |
| rect.fRight - rx + sx, rect.fBottom, |
| rect.fRight - rx, rect.fBottom); // bot-right |
| if (!skip_hori) { |
| this->lineTo(rect.fLeft + rx, rect.fBottom); // bottom |
| } |
| this->cubicTo(rect.fLeft + rx - sx, rect.fBottom, |
| rect.fLeft, rect.fBottom - ry + sy, |
| rect.fLeft, rect.fBottom - ry); // bot-left |
| if (!skip_vert) { |
| this->lineTo(rect.fLeft, rect.fTop + ry); // left |
| } |
| this->cubicTo(rect.fLeft, rect.fTop + ry - sy, |
| rect.fLeft + rx - sx, rect.fTop, |
| rect.fLeft + rx, rect.fTop); // top-left |
| if (!skip_hori) { |
| this->lineTo(rect.fRight - rx, rect.fTop); // top |
| } |
| } |
| this->close(); |
| } |
| |
| static void add_corner_arc(SkPath* path, const SkRect& rect, |
| SkScalar rx, SkScalar ry, int startAngle, |
| SkPath::Direction dir, bool forceMoveTo) { |
| rx = SkMinScalar(SkScalarHalf(rect.width()), rx); |
| ry = SkMinScalar(SkScalarHalf(rect.height()), ry); |
| |
| SkRect r; |
| r.set(-rx, -ry, rx, ry); |
| |
| switch (startAngle) { |
| case 0: |
| r.offset(rect.fRight - r.fRight, rect.fBottom - r.fBottom); |
| break; |
| case 90: |
| r.offset(rect.fLeft - r.fLeft, rect.fBottom - r.fBottom); |
| break; |
| case 180: r.offset(rect.fLeft - r.fLeft, rect.fTop - r.fTop); break; |
| case 270: r.offset(rect.fRight - r.fRight, rect.fTop - r.fTop); break; |
| default: SkASSERT(!"unexpected startAngle in add_corner_arc"); |
| } |
| |
| SkScalar start = SkIntToScalar(startAngle); |
| SkScalar sweep = SkIntToScalar(90); |
| if (SkPath::kCCW_Direction == dir) { |
| start += sweep; |
| sweep = -sweep; |
| } |
| |
| path->arcTo(r, start, sweep, forceMoveTo); |
| } |
| |
| void SkPath::addRoundRect(const SkRect& rect, const SkScalar rad[], |
| Direction dir) { |
| SkAutoPathBoundsUpdate apbu(this, rect); |
| |
| if (kCW_Direction == dir) { |
| add_corner_arc(this, rect, rad[0], rad[1], 180, dir, true); |
| add_corner_arc(this, rect, rad[2], rad[3], 270, dir, false); |
| add_corner_arc(this, rect, rad[4], rad[5], 0, dir, false); |
| add_corner_arc(this, rect, rad[6], rad[7], 90, dir, false); |
| } else { |
| add_corner_arc(this, rect, rad[0], rad[1], 180, dir, true); |
| add_corner_arc(this, rect, rad[6], rad[7], 90, dir, false); |
| add_corner_arc(this, rect, rad[4], rad[5], 0, dir, false); |
| add_corner_arc(this, rect, rad[2], rad[3], 270, dir, false); |
| } |
| this->close(); |
| } |
| |
| void SkPath::addOval(const SkRect& oval, Direction dir) { |
| SkAutoPathBoundsUpdate apbu(this, oval); |
| |
| SkScalar cx = oval.centerX(); |
| SkScalar cy = oval.centerY(); |
| SkScalar rx = SkScalarHalf(oval.width()); |
| SkScalar ry = SkScalarHalf(oval.height()); |
| #if 0 // these seem faster than using quads (1/2 the number of edges) |
| SkScalar sx = SkScalarMul(rx, CUBIC_ARC_FACTOR); |
| SkScalar sy = SkScalarMul(ry, CUBIC_ARC_FACTOR); |
| |
| this->incReserve(13); |
| this->moveTo(cx + rx, cy); |
| if (dir == kCCW_Direction) { |
| this->cubicTo(cx + rx, cy - sy, cx + sx, cy - ry, cx, cy - ry); |
| this->cubicTo(cx - sx, cy - ry, cx - rx, cy - sy, cx - rx, cy); |
| this->cubicTo(cx - rx, cy + sy, cx - sx, cy + ry, cx, cy + ry); |
| this->cubicTo(cx + sx, cy + ry, cx + rx, cy + sy, cx + rx, cy); |
| } else { |
| this->cubicTo(cx + rx, cy + sy, cx + sx, cy + ry, cx, cy + ry); |
| this->cubicTo(cx - sx, cy + ry, cx - rx, cy + sy, cx - rx, cy); |
| this->cubicTo(cx - rx, cy - sy, cx - sx, cy - ry, cx, cy - ry); |
| this->cubicTo(cx + sx, cy - ry, cx + rx, cy - sy, cx + rx, cy); |
| } |
| #else |
| SkScalar sx = SkScalarMul(rx, SK_ScalarTanPIOver8); |
| SkScalar sy = SkScalarMul(ry, SK_ScalarTanPIOver8); |
| SkScalar mx = SkScalarMul(rx, SK_ScalarRoot2Over2); |
| SkScalar my = SkScalarMul(ry, SK_ScalarRoot2Over2); |
| |
| this->incReserve(17); // 8 quads + close |
| this->moveTo(cx + rx, cy); |
| if (dir == kCCW_Direction) { |
| this->quadTo(cx + rx, cy - sy, cx + mx, cy - my); |
| this->quadTo(cx + sx, cy - ry, cx + 0, cy - ry); |
| this->quadTo(cx - sx, cy - ry, cx - mx, cy - my); |
| this->quadTo(cx - rx, cy - sy, cx - rx, cy - 0); |
| this->quadTo(cx - rx, cy + sy, cx - mx, cy + my); |
| this->quadTo(cx - sx, cy + ry, cx - 0, cy + ry); |
| this->quadTo(cx + sx, cy + ry, cx + mx, cy + my); |
| this->quadTo(cx + rx, cy + sy, cx + rx, cy + 0); |
| } else { |
| this->quadTo(cx + rx, cy + sy, cx + mx, cy + my); |
| this->quadTo(cx + sx, cy + ry, cx - 0, cy + ry); |
| this->quadTo(cx - sx, cy + ry, cx - mx, cy + my); |
| this->quadTo(cx - rx, cy + sy, cx - rx, cy - 0); |
| this->quadTo(cx - rx, cy - sy, cx - mx, cy - my); |
| this->quadTo(cx - sx, cy - ry, cx + 0, cy - ry); |
| this->quadTo(cx + sx, cy - ry, cx + mx, cy - my); |
| this->quadTo(cx + rx, cy - sy, cx + rx, cy + 0); |
| } |
| #endif |
| this->close(); |
| } |
| |
| void SkPath::addCircle(SkScalar x, SkScalar y, SkScalar r, Direction dir) { |
| if (r > 0) { |
| SkRect rect; |
| rect.set(x - r, y - r, x + r, y + r); |
| this->addOval(rect, dir); |
| } |
| } |
| |
| #include "SkGeometry.h" |
| |
| static int build_arc_points(const SkRect& oval, SkScalar startAngle, |
| SkScalar sweepAngle, |
| SkPoint pts[kSkBuildQuadArcStorage]) { |
| SkVector start, stop; |
| |
| start.fY = SkScalarSinCos(SkDegreesToRadians(startAngle), &start.fX); |
| stop.fY = SkScalarSinCos(SkDegreesToRadians(startAngle + sweepAngle), |
| &stop.fX); |
| |
| SkMatrix matrix; |
| |
| matrix.setScale(SkScalarHalf(oval.width()), SkScalarHalf(oval.height())); |
| matrix.postTranslate(oval.centerX(), oval.centerY()); |
| |
| return SkBuildQuadArc(start, stop, |
| sweepAngle > 0 ? kCW_SkRotationDirection : kCCW_SkRotationDirection, |
| &matrix, pts); |
| } |
| |
| void SkPath::arcTo(const SkRect& oval, SkScalar startAngle, SkScalar sweepAngle, |
| bool forceMoveTo) { |
| if (oval.width() < 0 || oval.height() < 0) { |
| return; |
| } |
| |
| SkPoint pts[kSkBuildQuadArcStorage]; |
| int count = build_arc_points(oval, startAngle, sweepAngle, pts); |
| SkASSERT((count & 1) == 1); |
| |
| if (fVerbs.count() == 0) { |
| forceMoveTo = true; |
| } |
| this->incReserve(count); |
| forceMoveTo ? this->moveTo(pts[0]) : this->lineTo(pts[0]); |
| for (int i = 1; i < count; i += 2) { |
| this->quadTo(pts[i], pts[i+1]); |
| } |
| } |
| |
| void SkPath::addArc(const SkRect& oval, SkScalar startAngle, |
| SkScalar sweepAngle) { |
| if (oval.isEmpty() || 0 == sweepAngle) { |
| return; |
| } |
| |
| const SkScalar kFullCircleAngle = SkIntToScalar(360); |
| |
| if (sweepAngle >= kFullCircleAngle || sweepAngle <= -kFullCircleAngle) { |
| this->addOval(oval, sweepAngle > 0 ? kCW_Direction : kCCW_Direction); |
| return; |
| } |
| |
| SkPoint pts[kSkBuildQuadArcStorage]; |
| int count = build_arc_points(oval, startAngle, sweepAngle, pts); |
| |
| this->incReserve(count); |
| this->moveTo(pts[0]); |
| for (int i = 1; i < count; i += 2) { |
| this->quadTo(pts[i], pts[i+1]); |
| } |
| } |
| |
| /* |
| Need to handle the case when the angle is sharp, and our computed end-points |
| for the arc go behind pt1 and/or p2... |
| */ |
| void SkPath::arcTo(SkScalar x1, SkScalar y1, SkScalar x2, SkScalar y2, |
| SkScalar radius) { |
| SkVector before, after; |
| |
| // need to know our prev pt so we can construct tangent vectors |
| { |
| SkPoint start; |
| this->getLastPt(&start); |
| before.setNormalize(x1 - start.fX, y1 - start.fY); |
| after.setNormalize(x2 - x1, y2 - y1); |
| } |
| |
| SkScalar cosh = SkPoint::DotProduct(before, after); |
| SkScalar sinh = SkPoint::CrossProduct(before, after); |
| |
| if (SkScalarNearlyZero(sinh)) { // angle is too tight |
| return; |
| } |
| |
| SkScalar dist = SkScalarMulDiv(radius, SK_Scalar1 - cosh, sinh); |
| if (dist < 0) { |
| dist = -dist; |
| } |
| |
| SkScalar xx = x1 - SkScalarMul(dist, before.fX); |
| SkScalar yy = y1 - SkScalarMul(dist, before.fY); |
| SkRotationDirection arcDir; |
| |
| // now turn before/after into normals |
| if (sinh > 0) { |
| before.rotateCCW(); |
| after.rotateCCW(); |
| arcDir = kCW_SkRotationDirection; |
| } else { |
| before.rotateCW(); |
| after.rotateCW(); |
| arcDir = kCCW_SkRotationDirection; |
| } |
| |
| SkMatrix matrix; |
| SkPoint pts[kSkBuildQuadArcStorage]; |
| |
| matrix.setScale(radius, radius); |
| matrix.postTranslate(xx - SkScalarMul(radius, before.fX), |
| yy - SkScalarMul(radius, before.fY)); |
| |
| int count = SkBuildQuadArc(before, after, arcDir, &matrix, pts); |
| |
| this->incReserve(count); |
| // [xx,yy] == pts[0] |
| this->lineTo(xx, yy); |
| for (int i = 1; i < count; i += 2) { |
| this->quadTo(pts[i], pts[i+1]); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkPath::addPath(const SkPath& path, SkScalar dx, SkScalar dy) { |
| SkMatrix matrix; |
| |
| matrix.setTranslate(dx, dy); |
| this->addPath(path, matrix); |
| } |
| |
| void SkPath::addPath(const SkPath& path, const SkMatrix& matrix) { |
| this->incReserve(path.fPts.count()); |
| |
| Iter iter(path, false); |
| SkPoint pts[4]; |
| Verb verb; |
| |
| SkMatrix::MapPtsProc proc = matrix.getMapPtsProc(); |
| |
| while ((verb = iter.next(pts)) != kDone_Verb) { |
| switch (verb) { |
| case kMove_Verb: |
| proc(matrix, &pts[0], &pts[0], 1); |
| this->moveTo(pts[0]); |
| break; |
| case kLine_Verb: |
| proc(matrix, &pts[1], &pts[1], 1); |
| this->lineTo(pts[1]); |
| break; |
| case kQuad_Verb: |
| proc(matrix, &pts[1], &pts[1], 2); |
| this->quadTo(pts[1], pts[2]); |
| break; |
| case kCubic_Verb: |
| proc(matrix, &pts[1], &pts[1], 3); |
| this->cubicTo(pts[1], pts[2], pts[3]); |
| break; |
| case kClose_Verb: |
| this->close(); |
| break; |
| default: |
| SkASSERT(!"unknown verb"); |
| } |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static const uint8_t gPtsInVerb[] = { |
| 1, // kMove |
| 1, // kLine |
| 2, // kQuad |
| 3, // kCubic |
| 0, // kClose |
| 0 // kDone |
| }; |
| |
| // ignore the initial moveto, and stop when the 1st contour ends |
| void SkPath::pathTo(const SkPath& path) { |
| int i, vcount = path.fVerbs.count(); |
| if (vcount == 0) { |
| return; |
| } |
| |
| this->incReserve(vcount); |
| |
| const uint8_t* verbs = path.fVerbs.begin(); |
| const SkPoint* pts = path.fPts.begin() + 1; // 1 for the initial moveTo |
| |
| SkASSERT(verbs[0] == kMove_Verb); |
| for (i = 1; i < vcount; i++) { |
| switch (verbs[i]) { |
| case kLine_Verb: |
| this->lineTo(pts[0].fX, pts[0].fY); |
| break; |
| case kQuad_Verb: |
| this->quadTo(pts[0].fX, pts[0].fY, pts[1].fX, pts[1].fY); |
| break; |
| case kCubic_Verb: |
| this->cubicTo(pts[0].fX, pts[0].fY, pts[1].fX, pts[1].fY, |
| pts[2].fX, pts[2].fY); |
| break; |
| case kClose_Verb: |
| return; |
| } |
| pts += gPtsInVerb[verbs[i]]; |
| } |
| } |
| |
| // ignore the last point of the 1st contour |
| void SkPath::reversePathTo(const SkPath& path) { |
| int i, vcount = path.fVerbs.count(); |
| if (vcount == 0) { |
| return; |
| } |
| |
| this->incReserve(vcount); |
| |
| const uint8_t* verbs = path.fVerbs.begin(); |
| const SkPoint* pts = path.fPts.begin(); |
| |
| SkASSERT(verbs[0] == kMove_Verb); |
| for (i = 1; i < vcount; i++) { |
| int n = gPtsInVerb[verbs[i]]; |
| if (n == 0) { |
| break; |
| } |
| pts += n; |
| } |
| |
| while (--i > 0) { |
| switch (verbs[i]) { |
| case kLine_Verb: |
| this->lineTo(pts[-1].fX, pts[-1].fY); |
| break; |
| case kQuad_Verb: |
| this->quadTo(pts[-1].fX, pts[-1].fY, pts[-2].fX, pts[-2].fY); |
| break; |
| case kCubic_Verb: |
| this->cubicTo(pts[-1].fX, pts[-1].fY, pts[-2].fX, pts[-2].fY, |
| pts[-3].fX, pts[-3].fY); |
| break; |
| default: |
| SkASSERT(!"bad verb"); |
| break; |
| } |
| pts -= gPtsInVerb[verbs[i]]; |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| void SkPath::offset(SkScalar dx, SkScalar dy, SkPath* dst) const { |
| SkMatrix matrix; |
| |
| matrix.setTranslate(dx, dy); |
| this->transform(matrix, dst); |
| } |
| |
| #include "SkGeometry.h" |
| |
| static void subdivide_quad_to(SkPath* path, const SkPoint pts[3], |
| int level = 2) { |
| if (--level >= 0) { |
| SkPoint tmp[5]; |
| |
| SkChopQuadAtHalf(pts, tmp); |
| subdivide_quad_to(path, &tmp[0], level); |
| subdivide_quad_to(path, &tmp[2], level); |
| } else { |
| path->quadTo(pts[1], pts[2]); |
| } |
| } |
| |
| static void subdivide_cubic_to(SkPath* path, const SkPoint pts[4], |
| int level = 2) { |
| if (--level >= 0) { |
| SkPoint tmp[7]; |
| |
| SkChopCubicAtHalf(pts, tmp); |
| subdivide_cubic_to(path, &tmp[0], level); |
| subdivide_cubic_to(path, &tmp[3], level); |
| } else { |
| path->cubicTo(pts[1], pts[2], pts[3]); |
| } |
| } |
| |
| void SkPath::transform(const SkMatrix& matrix, SkPath* dst) const { |
| SkDEBUGCODE(this->validate();) |
| if (dst == NULL) { |
| dst = (SkPath*)this; |
| } |
| |
| if (matrix.getType() & SkMatrix::kPerspective_Mask) { |
| SkPath tmp; |
| tmp.fFillType = fFillType; |
| |
| SkPath::Iter iter(*this, false); |
| SkPoint pts[4]; |
| SkPath::Verb verb; |
| |
| while ((verb = iter.next(pts)) != kDone_Verb) { |
| switch (verb) { |
| case kMove_Verb: |
| tmp.moveTo(pts[0]); |
| break; |
| case kLine_Verb: |
| tmp.lineTo(pts[1]); |
| break; |
| case kQuad_Verb: |
| subdivide_quad_to(&tmp, pts); |
| break; |
| case kCubic_Verb: |
| subdivide_cubic_to(&tmp, pts); |
| break; |
| case kClose_Verb: |
| tmp.close(); |
| break; |
| default: |
| SkASSERT(!"unknown verb"); |
| break; |
| } |
| } |
| |
| dst->swap(tmp); |
| matrix.mapPoints(dst->fPts.begin(), dst->fPts.count()); |
| } else { |
| // remember that dst might == this, so be sure to check |
| // fFastBoundsIsDirty before we set it |
| if (!fFastBoundsIsDirty && matrix.rectStaysRect() && fPts.count() > 1) { |
| // if we're empty, fastbounds should not be mapped |
| matrix.mapRect(&dst->fFastBounds, fFastBounds); |
| dst->fFastBoundsIsDirty = false; |
| } else { |
| dst->fFastBoundsIsDirty = true; |
| } |
| |
| if (this != dst) { |
| dst->fVerbs = fVerbs; |
| dst->fPts.setCount(fPts.count()); |
| dst->fFillType = fFillType; |
| } |
| matrix.mapPoints(dst->fPts.begin(), fPts.begin(), fPts.count()); |
| SkDEBUGCODE(dst->validate();) |
| } |
| } |
| |
| void SkPath::updateBoundsCache() const { |
| if (fFastBoundsIsDirty) { |
| SkRect r; |
| this->computeBounds(&r, kFast_BoundsType); |
| SkASSERT(!fFastBoundsIsDirty); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| enum NeedMoveToState { |
| kAfterClose_NeedMoveToState, |
| kAfterCons_NeedMoveToState, |
| kAfterPrefix_NeedMoveToState |
| }; |
| |
| SkPath::Iter::Iter() { |
| #ifdef SK_DEBUG |
| fPts = NULL; |
| fMoveTo.fX = fMoveTo.fY = fLastPt.fX = fLastPt.fY = 0; |
| fForceClose = fNeedMoveTo = fCloseLine = false; |
| #endif |
| // need to init enough to make next() harmlessly return kDone_Verb |
| fVerbs = NULL; |
| fVerbStop = NULL; |
| fNeedClose = false; |
| } |
| |
| SkPath::Iter::Iter(const SkPath& path, bool forceClose) { |
| this->setPath(path, forceClose); |
| } |
| |
| void SkPath::Iter::setPath(const SkPath& path, bool forceClose) { |
| fPts = path.fPts.begin(); |
| fVerbs = path.fVerbs.begin(); |
| fVerbStop = path.fVerbs.end(); |
| fForceClose = SkToU8(forceClose); |
| fNeedClose = false; |
| fNeedMoveTo = kAfterPrefix_NeedMoveToState; |
| } |
| |
| bool SkPath::Iter::isClosedContour() const { |
| if (fVerbs == NULL || fVerbs == fVerbStop) { |
| return false; |
| } |
| if (fForceClose) { |
| return true; |
| } |
| |
| const uint8_t* verbs = fVerbs; |
| const uint8_t* stop = fVerbStop; |
| |
| if (kMove_Verb == *verbs) { |
| verbs += 1; // skip the initial moveto |
| } |
| |
| while (verbs < stop) { |
| unsigned v = *verbs++; |
| if (kMove_Verb == v) { |
| break; |
| } |
| if (kClose_Verb == v) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| SkPath::Verb SkPath::Iter::autoClose(SkPoint pts[2]) { |
| if (fLastPt != fMoveTo) { |
| if (pts) { |
| pts[0] = fLastPt; |
| pts[1] = fMoveTo; |
| } |
| fLastPt = fMoveTo; |
| fCloseLine = true; |
| return kLine_Verb; |
| } |
| return kClose_Verb; |
| } |
| |
| bool SkPath::Iter::cons_moveTo(SkPoint pts[1]) { |
| if (fNeedMoveTo == kAfterClose_NeedMoveToState) { |
| if (pts) { |
| *pts = fMoveTo; |
| } |
| fNeedClose = fForceClose; |
| fNeedMoveTo = kAfterCons_NeedMoveToState; |
| fVerbs -= 1; |
| return true; |
| } |
| |
| if (fNeedMoveTo == kAfterCons_NeedMoveToState) { |
| if (pts) { |
| *pts = fMoveTo; |
| } |
| fNeedMoveTo = kAfterPrefix_NeedMoveToState; |
| } else { |
| SkASSERT(fNeedMoveTo == kAfterPrefix_NeedMoveToState); |
| if (pts) { |
| *pts = fPts[-1]; |
| } |
| } |
| return false; |
| } |
| |
| SkPath::Verb SkPath::Iter::next(SkPoint pts[4]) { |
| if (fVerbs == fVerbStop) { |
| if (fNeedClose) { |
| if (kLine_Verb == this->autoClose(pts)) { |
| return kLine_Verb; |
| } |
| fNeedClose = false; |
| return kClose_Verb; |
| } |
| return kDone_Verb; |
| } |
| |
| unsigned verb = *fVerbs++; |
| const SkPoint* srcPts = fPts; |
| |
| switch (verb) { |
| case kMove_Verb: |
| if (fNeedClose) { |
| fVerbs -= 1; |
| verb = this->autoClose(pts); |
| if (verb == kClose_Verb) { |
| fNeedClose = false; |
| } |
| return (Verb)verb; |
| } |
| if (fVerbs == fVerbStop) { // might be a trailing moveto |
| return kDone_Verb; |
| } |
| fMoveTo = *srcPts; |
| if (pts) { |
| pts[0] = *srcPts; |
| } |
| srcPts += 1; |
| fNeedMoveTo = kAfterCons_NeedMoveToState; |
| fNeedClose = fForceClose; |
| break; |
| case kLine_Verb: |
| if (this->cons_moveTo(pts)) { |
| return kMove_Verb; |
| } |
| if (pts) { |
| pts[1] = srcPts[0]; |
| } |
| fLastPt = srcPts[0]; |
| fCloseLine = false; |
| srcPts += 1; |
| break; |
| case kQuad_Verb: |
| if (this->cons_moveTo(pts)) { |
| return kMove_Verb; |
| } |
| if (pts) { |
| memcpy(&pts[1], srcPts, 2 * sizeof(SkPoint)); |
| } |
| fLastPt = srcPts[1]; |
| srcPts += 2; |
| break; |
| case kCubic_Verb: |
| if (this->cons_moveTo(pts)) { |
| return kMove_Verb; |
| } |
| if (pts) { |
| memcpy(&pts[1], srcPts, 3 * sizeof(SkPoint)); |
| } |
| fLastPt = srcPts[2]; |
| srcPts += 3; |
| break; |
| case kClose_Verb: |
| verb = this->autoClose(pts); |
| if (verb == kLine_Verb) { |
| fVerbs -= 1; |
| } else { |
| fNeedClose = false; |
| } |
| fNeedMoveTo = kAfterClose_NeedMoveToState; |
| break; |
| } |
| fPts = srcPts; |
| return (Verb)verb; |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| static bool exceeds_dist(const SkScalar p[], const SkScalar q[], SkScalar dist, |
| int count) { |
| SkASSERT(dist > 0); |
| |
| count *= 2; |
| for (int i = 0; i < count; i++) { |
| if (SkScalarAbs(p[i] - q[i]) > dist) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| static void subdivide_quad(SkPath* dst, const SkPoint pts[3], SkScalar dist, |
| int subLevel = 4) { |
| if (--subLevel >= 0 && exceeds_dist(&pts[0].fX, &pts[1].fX, dist, 4)) { |
| SkPoint tmp[5]; |
| SkChopQuadAtHalf(pts, tmp); |
| |
| subdivide_quad(dst, &tmp[0], dist, subLevel); |
| subdivide_quad(dst, &tmp[2], dist, subLevel); |
| } else { |
| dst->quadTo(pts[1], pts[2]); |
| } |
| } |
| |
| static void subdivide_cubic(SkPath* dst, const SkPoint pts[4], SkScalar dist, |
| int subLevel = 4) { |
| if (--subLevel >= 0 && exceeds_dist(&pts[0].fX, &pts[1].fX, dist, 6)) { |
| SkPoint tmp[7]; |
| SkChopCubicAtHalf(pts, tmp); |
| |
| subdivide_cubic(dst, &tmp[0], dist, subLevel); |
| subdivide_cubic(dst, &tmp[3], dist, subLevel); |
| } else { |
| dst->cubicTo(pts[1], pts[2], pts[3]); |
| } |
| } |
| |
| void SkPath::subdivide(SkScalar dist, bool bendLines, SkPath* dst) const { |
| SkPath tmpPath; |
| if (NULL == dst || this == dst) { |
| dst = &tmpPath; |
| } |
| |
| SkPath::Iter iter(*this, false); |
| SkPoint pts[4]; |
| |
| for (;;) { |
| switch (iter.next(pts)) { |
| case SkPath::kMove_Verb: |
| dst->moveTo(pts[0]); |
| break; |
| case SkPath::kLine_Verb: |
| if (!bendLines) { |
| dst->lineTo(pts[1]); |
| break; |
| } |
| // construct a quad from the line |
| pts[2] = pts[1]; |
| pts[1].set(SkScalarAve(pts[0].fX, pts[2].fX), |
| SkScalarAve(pts[0].fY, pts[2].fY)); |
| // fall through to the quad case |
| case SkPath::kQuad_Verb: |
| subdivide_quad(dst, pts, dist); |
| break; |
| case SkPath::kCubic_Verb: |
| subdivide_cubic(dst, pts, dist); |
| break; |
| case SkPath::kClose_Verb: |
| dst->close(); |
| break; |
| case SkPath::kDone_Verb: |
| goto DONE; |
| } |
| } |
| DONE: |
| if (&tmpPath == dst) { // i.e. the dst should be us |
| dst->swap(*(SkPath*)this); |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////// |
| /* |
| Format in flattened buffer: [ptCount, verbCount, pts[], verbs[]] |
| */ |
| |
| void SkPath::flatten(SkFlattenableWriteBuffer& buffer) const { |
| SkDEBUGCODE(this->validate();) |
| |
| buffer.write32(fPts.count()); |
| buffer.write32(fVerbs.count()); |
| buffer.write32(fFillType); |
| buffer.writeMul4(fPts.begin(), sizeof(SkPoint) * fPts.count()); |
| buffer.writePad(fVerbs.begin(), fVerbs.count()); |
| } |
| |
| void SkPath::unflatten(SkFlattenableReadBuffer& buffer) { |
| fPts.setCount(buffer.readS32()); |
| fVerbs.setCount(buffer.readS32()); |
| fFillType = buffer.readS32(); |
| buffer.read(fPts.begin(), sizeof(SkPoint) * fPts.count()); |
| buffer.read(fVerbs.begin(), fVerbs.count()); |
| |
| fFastBoundsIsDirty = true; |
| |
| SkDEBUGCODE(this->validate();) |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #include "SkString.h" |
| #include "SkStream.h" |
| |
| static void write_scalar(SkWStream* stream, SkScalar value) { |
| char buffer[SkStrAppendScalar_MaxSize]; |
| char* stop = SkStrAppendScalar(buffer, value); |
| stream->write(buffer, stop - buffer); |
| } |
| |
| static void append_scalars(SkWStream* stream, char verb, const SkScalar data[], |
| int count) { |
| stream->write(&verb, 1); |
| write_scalar(stream, data[0]); |
| for (int i = 1; i < count; i++) { |
| if (data[i] >= 0) { |
| // can skip the separater if data[i] is negative |
| stream->write(" ", 1); |
| } |
| write_scalar(stream, data[i]); |
| } |
| } |
| |
| void SkPath::toString(SkString* str) const { |
| SkDynamicMemoryWStream stream; |
| |
| SkPath::Iter iter(*this, false); |
| SkPoint pts[4]; |
| |
| for (;;) { |
| switch (iter.next(pts)) { |
| case SkPath::kMove_Verb: |
| append_scalars(&stream, 'M', &pts[0].fX, 2); |
| break; |
| case SkPath::kLine_Verb: |
| append_scalars(&stream, 'L', &pts[1].fX, 2); |
| break; |
| case SkPath::kQuad_Verb: |
| append_scalars(&stream, 'Q', &pts[1].fX, 4); |
| break; |
| case SkPath::kCubic_Verb: |
| append_scalars(&stream, 'C', &pts[1].fX, 6); |
| break; |
| case SkPath::kClose_Verb: |
| stream.write("Z", 1); |
| break; |
| case SkPath::kDone_Verb: |
| str->resize(stream.getOffset()); |
| stream.copyTo(str->writable_str()); |
| return; |
| } |
| } |
| } |
| |
| /////////////////////////////////////////////////////////////////////////////// |
| /////////////////////////////////////////////////////////////////////////////// |
| |
| #ifdef SK_DEBUG |
| |
| void SkPath::validate() const { |
| SkASSERT(this != NULL); |
| SkASSERT((fFillType & ~3) == 0); |
| fPts.validate(); |
| fVerbs.validate(); |
| |
| if (!fFastBoundsIsDirty) { |
| SkRect bounds; |
| compute_fast_bounds(&bounds, fPts); |
| // can't call contains(), since it returns false if the rect is empty |
| SkASSERT(fFastBounds.fLeft <= bounds.fLeft); |
| SkASSERT(fFastBounds.fTop <= bounds.fTop); |
| SkASSERT(fFastBounds.fRight >= bounds.fRight); |
| SkASSERT(fFastBounds.fBottom >= bounds.fBottom); |
| } |
| } |
| |
| #if 0 // test to ensure that the iterator returns the same data as the path |
| void SkPath::test() const |
| { |
| Iter iter(*this, false); |
| SkPoint pts[4]; |
| Verb verb; |
| |
| const uint8_t* verbs = fVerbs.begin(); |
| const SkPoint* points = fPts.begin(); |
| |
| while ((verb = iter.next(pts)) != kDone_Verb) |
| { |
| SkASSERT(*verbs == verb); |
| verbs += 1; |
| |
| int count; |
| switch (verb) { |
| case kMove_Verb: |
| count = 1; |
| break; |
| case kLine_Verb: |
| count = 2; |
| break; |
| case kQuad_Verb: |
| count = 3; |
| break; |
| case kCubic_Verb: |
| count = 4; |
| break; |
| case kClose_Verb: |
| default: |
| count = 0; |
| break; |
| } |
| if (count > 1) |
| points -= 1; |
| SkASSERT(memcmp(pts, points, count * sizeof(SkPoint)) == 0); |
| points += count; |
| } |
| |
| int vc = fVerbs.count(), pc = fPts.count(); |
| if (vc && fVerbs.begin()[vc-1] == kMove_Verb) |
| { |
| vc -= 1; |
| pc -= 1; |
| } |
| SkASSERT(verbs - fVerbs.begin() == vc); |
| SkASSERT(points - fPts.begin() == pc); |
| } |
| #endif |
| |
| void SkPath::dump(bool forceClose, const char title[]) const { |
| Iter iter(*this, forceClose); |
| SkPoint pts[4]; |
| Verb verb; |
| |
| SkDebugf("path: forceClose=%s %s\n", forceClose ? "true" : "false", |
| title ? title : ""); |
| |
| while ((verb = iter.next(pts)) != kDone_Verb) { |
| switch (verb) { |
| case kMove_Verb: |
| #ifdef SK_CAN_USE_FLOAT |
| SkDebugf(" path: moveTo [%g %g]\n", |
| SkScalarToFloat(pts[0].fX), SkScalarToFloat(pts[0].fY)); |
| #else |
| SkDebugf(" path: moveTo [%x %x]\n", pts[0].fX, pts[0].fY); |
| #endif |
| break; |
| case kLine_Verb: |
| #ifdef SK_CAN_USE_FLOAT |
| SkDebugf(" path: lineTo [%g %g]\n", |
| SkScalarToFloat(pts[1].fX), SkScalarToFloat(pts[1].fY)); |
| #else |
| SkDebugf(" path: lineTo [%x %x]\n", pts[1].fX, pts[1].fY); |
| #endif |
| break; |
| case kQuad_Verb: |
| #ifdef SK_CAN_USE_FLOAT |
| SkDebugf(" path: quadTo [%g %g] [%g %g]\n", |
| SkScalarToFloat(pts[1].fX), SkScalarToFloat(pts[1].fY), |
| SkScalarToFloat(pts[2].fX), SkScalarToFloat(pts[2].fY)); |
| #else |
| SkDebugf(" path: quadTo [%x %x] [%x %x]\n", |
| pts[1].fX, pts[1].fY, pts[2].fX, pts[2].fY); |
| #endif |
| break; |
| case kCubic_Verb: |
| #ifdef SK_CAN_USE_FLOAT |
| SkDebugf(" path: cubeTo [%g %g] [%g %g] [%g %g]\n", |
| SkScalarToFloat(pts[1].fX), SkScalarToFloat(pts[1].fY), |
| SkScalarToFloat(pts[2].fX), SkScalarToFloat(pts[2].fY), |
| SkScalarToFloat(pts[3].fX), SkScalarToFloat(pts[3].fY)); |
| #else |
| SkDebugf(" path: cubeTo [%x %x] [%x %x] [%x %x]\n", |
| pts[1].fX, pts[1].fY, pts[2].fX, pts[2].fY, |
| pts[3].fX, pts[3].fY); |
| #endif |
| break; |
| case kClose_Verb: |
| SkDebugf(" path: close\n"); |
| break; |
| default: |
| SkDebugf(" path: UNKNOWN VERB %d, aborting dump...\n", verb); |
| verb = kDone_Verb; // stop the loop |
| break; |
| } |
| } |
| SkDebugf("path: done %s\n", title ? title : ""); |
| } |
| |
| #include "SkTSort.h" |
| |
| void SkPath::UnitTest() { |
| #ifdef SK_SUPPORT_UNITTEST |
| SkPath p; |
| SkRect r; |
| |
| r.set(0, 0, 10, 20); |
| p.addRect(r); |
| p.dump(false); |
| p.dump(true); |
| |
| { |
| int array[] = { 5, 3, 7, 2, 6, 1, 2, 9, 5, 0 }; |
| int i; |
| |
| for (i = 0; i < (int)SK_ARRAY_COUNT(array); i++) { |
| SkDebugf(" %d", array[i]); |
| } |
| SkDebugf("\n"); |
| SkTHeapSort<int>(array, SK_ARRAY_COUNT(array)); |
| for (i = 0; i < (int)SK_ARRAY_COUNT(array); i++) |
| SkDebugf(" %d", array[i]); |
| SkDebugf("\n"); |
| } |
| |
| { |
| SkPath p; |
| SkPoint pt; |
| |
| p.moveTo(SK_Scalar1, 0); |
| p.getLastPt(&pt); |
| SkASSERT(pt.fX == SK_Scalar1); |
| } |
| #endif |
| } |
| |
| #endif |
