| v4l-utils-1.6.0 |
| --------------- |
| |
| Gregor Jasny (5): |
| man: Fix typo in dvb-fe-tool man page |
| man: Replace hyphen with minus sign |
| man: place escape to correct position |
| man: Use Unicode character for ellipsis and fall back to ... |
| qv4l2: Add keywords to desktop file |
| |
| |
| v4l-utils-1.5.91 (Development snapshot) |
| --------------------------------------- |
| |
| Gregor Jasny (3): |
| Start v4l-utils 1.5.91 development cycle |
| libdvbv5: Remove left over include of desc_service_list.h |
| libdvbv5: Fix typo in doxygen index file |
| |
| Mauro Carvalho Chehab (30): |
| dvb-file: Fix a memory leak |
| dvb-file: frees channel/vchannel if service id not found |
| dvb-file: Remove spaces at the beginning of channel name |
| dvb-file: Only print SDT warning if are there any channel to be stored |
| dvb-file: Fix channel name when SDT is not found |
| libdvbv5/descriptors: Fix content hexdump |
| libdvbv5: Fix the number of frequencies at ISDB-T delivery sys descriptor |
| libdvbv5: print ISDB-T frequencies in MHz |
| libdvbv5: add a parser for ISO-10646/UCS2 strings |
| libdvbv5: Fix ISDB-T TS info descriptor |
| dvb-file: Fix no-SDT channel name allocation |
| dvb-file: fix the memory deallocation on error |
| dvb-file: don't dereference a NULL pointer |
| libdvbv5: check for alloc errors at desc_ca |
| dvb-format-convert: make valgrind happy |
| libdvbv5: fix a nasty to track double-free bug |
| dvb-fe-tool: abort nicely on femon mode |
| libdvbv5: replace @include by @example |
| man: move dvb-scan.1 out of Doxygen |
| man: move dvb-fe-tool.1 out of Doxygen |
| dvb-format-convert: Fix help message |
| man: move dvb-format-convert.1 out of Doxygen |
| man: add a utils/dvb/dvbv5-zap.1 page and remove from doxygen |
| user man pages: Change report bugs to linux media ML |
| Revert "dvb-file: don't dereference a NULL pointer" |
| libdvbv5: Fix frequency table alloc size at desc_frequency_list |
| .gitignore: Ignore quilt patches/ dir |
| dvbv5-scan: add vdr format for the --help parameter |
| user man pages: Add version to the man pages |
| |
| |
| v4l-utils-1.5.90 (Development snapshot) |
| --------------------------------------- |
| |
| André Roth (7): |
| libdvbv5: cleanup logging, some memory checks |
| libdvbv5: fix satellite LNBf handling |
| libdvbv5: fix dvb_fe_dummy() |
| libdvbv5: MPEG ES parser documentation |
| libdvbv5: use hyperlinks in doxygen PDF |
| libdvbv5: MPEG TS parser documentation |
| libdvbv5: MPEG TS parser documentation and cleanups |
| |
| Gregor Jasny (5): |
| Start v4l-utils 1.5.0 development cycle |
| buildsystem: Use latest ax_prog_doxygen from GNU Autoconf Archive |
| libdvbv5: Add todo file |
| libdvbv5: remove service_location descriptor |
| libdvbv5: remove service_list descriptor |
| doxygen: distribute doc/libdvbv5-index.doc in tarball |
| |
| Hans Verkuil (9): |
| v4l2-compliance: fix buffer state test |
| (c)v4l-helpers: zero bytesperline, swap arg order |
| qv4l2: the helper now zeroes bytesperline |
| cv4l-helpers: add missing ioctls |
| v4l2-ctl: fix control support for old kernels. |
| v4l-helpers.h: fix control ioctls checks |
| qv4l2: init dest format when starting vbi/swradio streaming |
| v4l2-compliance: fix valgrind warnings |
| qv4l2: fix typo: 576 instead of 575 |
| |
| Hans de Goede (3): |
| libv4l2: Fix restoring of original dest-fmt after a VIDIOC_S_DV_TIMING |
| libv4l2: Set convert_mmap_frame_size as soon as we've a dest_fmt |
| libv4l2: Move alignment of dest_fmt resolution to v4l2_set_src_and_dest_format |
| |
| Mauro Carvalho Chehab (60): |
| libdvbv5: add doxygen tags for header.h |
| libdvbv5: add doxygen tags to vct.h |
| libdvbv5: add doxygen tags to pat.h |
| doxygen_libdvbv5.cfg: add header.h, vct.h and pat.h |
| libdvbv5: fix some cut-and-paste errors at documentation |
| libdvbv5: add doxygen tags to pmt.h |
| libdvbv5: better comment the descriptors |
| libdvbv5: fix some issues at PAT documentation |
| libdvbv5: add documentation for sdt.h |
| libdvbv5: some documentation fixups for sdt.h |
| libdvbv5: add documentation for the NIT table parser |
| libdvbv5: add documentation for crc32.h |
| libdvbv5: Add documentation for EIT DVB parser |
| libdvbv5: Add a mainpage to the documentation |
| libdvbv5: add documentation for ATSC EIT. |
| libdvbv5: don't use ATSC_HEADER() macro |
| libdvbv5: don't use DVB_DESC_HEADER() macro |
| libdvbv5: add documentation for cat.h and atsc_header.h |
| libdvbv5: add support for mgt.h |
| libdvbv5 documentation review |
| libdvbv5: group documentation into modules |
| libdvbv5: add a missing macro to dvb_table group for documentation |
| doxygen: add dvbv5-tools to the documentation |
| dvb-fe-tool: Fix verbosity and comment unused option |
| libdvbv5: fix a typo at ASTRA 1E extended LNBf |
| Add support for VDR format (only for output) |
| libdvbv5: Add support for opening FE on read only mode |
| dvb-fe-tool: add support to open DVB FE in read only mode |
| libdvbv5: Don't double-free the file name |
| dvb-fe-tool: add femon parameter |
| libdvbv5: fix a nasty bug when printing stats |
| libdvbv5: Re-add the status name at the stats report |
| libdvbv5: export dvb_fe_retrieve_quality() |
| dvb-fe-tool: Colorize the status report |
| dvb-fe-tool: implement acoustic mode |
| update dvb-fe-tool Doxygen documentation |
| libdvbv5: revert an ABI breakage |
| libdvbv5: Create doxygen docs for mpeg_es.h |
| libdvbv5: add documentation for ATSC service location |
| libdvbv5: Add documentation for CA descriptor |
| libdvbv5: Add documentation for CA identifier descriptor |
| libdvbv5: add documentation for cable delivery system descriptor |
| libdvbv5: add documentation for the extended event descriptor |
| libdvbv5: add documentation for the short event descriptor |
| libdvbv5: add documentation for the extended descriptor |
| libdvbv5: add documentation for the frequency list descriptor |
| libdvbv5: Document the hierarchy descriptor |
| libdvbv5: Add documentation for ISDB-T terrestrial descriptor |
| libdvbv5: add documentation for the language descriptor |
| libdvbv5: Add description for the LCN descriptor |
| libdvbv5: add documentation for the network name descriptor |
| libdvbv5: add documentation for ISDB partial reception descriptor |
| libdvbv5: document the Satellite delivery system descriptor |
| libdvbv5: add documentation for the service descriptor |
| libdvbv5: Add documentation for desc_service_list.h |
| libdvbv5: add documentation for the T2 delivery system descriptor |
| libdvbv5: documents the terrestrial delivery system descriptor |
| libdvbv5: Documents ISDB TS information descriptor |
| libdvbv5: add javadoc markups for desc_service_location.h |
| dvb-file: Fix a core dump issue |
| |
| |
| v4l-utils-1.4.0 |
| --------------- |
| |
| Gregor Jasny (11): |
| Start v4l-utils 1.3.91 development cycle |
| libdvbv5: Remove dvbsat_polarization_name (same as dvb_sat_pol_name) |
| libdvbv5: Rename and hide charset definitions |
| libdvbv5: Hide unused and unexposed cnr_to_qual_s tables |
| libdvbv5: Make dummy_fe static |
| libdvbv5: Add doxygen config file to distribution list |
| libdvbv5: Add dvb-fe-priv.h to sources list |
| contrib: Add au0828 directory to extra distribution list |
| media-ctl: process pkgconfig files |
| v4l2-ctl: Distribute vivid-tpg.h.patch |
| ir-keytable: Genrate stable map file by sorting directory before parsing |
| |
| Hans Verkuil (6): |
| v4l2-compliance: require G/S_PRIORITY support for m2m devices |
| v4l2-ctl/qv4l2: sync to latest vivid-tpg code |
| v4l-utils: sync-with-kernel |
| Add the generated lib/include/dvb-frontend.h to .gitignore |
| Copy the vivid-tpg* sources from the kernel |
| qv4l2: fix bug in setting the audio mode |
| |
| Mauro Carvalho Chehab (72): |
| libdvbv5: be coherent with parse_string.h header |
| libdvbv5: Move charsets to be inside the parms struct |
| libdvbv5: move internal parameters to a separate structure |
| libdvbv5: Properly document struct dvb_v5_fe_parms |
| libdvbv5: Fix parameters dvb_add_parms_for_sys() |
| libdvbv5: Fix return values for dvb_fe_get_event() |
| libdvbv5: Add documentation for dvb-fe.h |
| libdvbv5: add the private structure to the tree |
| libdvbv5: Rename internally-defined poll function as dvb_poll |
| libdvbv5: fix a memory leak at descriptors |
| libdvbv5: reimplement the spaces filling logic |
| libdvbv5: Don't go past the size of dvb_v5_name |
| libdvbv5: Don't go past the size of dvb_v5_attr_names |
| libdvbv5: Fix changeset 04accf23 |
| libdvbv5: Allocate channel earlier |
| libdvbv5: add a missing return |
| dvbv5-zap: close dvr_fd at the end of do_traffic_monitor() |
| libdvbv5: Improve parsing of dvb channel format |
| libdvbv5: add support for parsing scan-s2 DVB-S2 channels |
| libdvbv5: don't write polarization and user parms twice |
| libdvbv5: Fix modulation formats for legacy channel on DVB-S2 |
| libdvbv5: only use emulated formats if the original one is not found |
| libdvbv5: remove some commented dead code |
| libdvbv5: add support for optional parameters on oneline formats |
| libdvbv5: add support for optional MIS parameter |
| libdvbv5: Add support for parsing DVB-T2 channel format |
| libdvbv5: Fix delivery system for channel on DVB-T2 format |
| Stop using the legacy name for PLP/MIS property |
| libdvbv5: fix parsing of the default_value |
| libdvbv5: Split libdvbv5 properties from stats |
| libdvbv5: better document dvb-v5-std.h |
| libdvbv5: Add MIS to DVB-S2 properties |
| libdvbv5: Fix the error message when a props is not found |
| libdvbv5: avoid checking past data |
| libdvbv5: use default values if an entry is missing |
| libdvbv5: MIS default should be zero |
| libdvbv5: add support for PLS code/mode for file read/write |
| libdvbv5: make sure that all needed properties are filled |
| libdvbv5: Fix the property limits check |
| libdvbv5: fix a corner case reported by Coverity |
| dvbv5-zap: keep monitoring stats at DVB record mode |
| dvbv5-zap: Be sure to get stats before printing |
| dvbv5-zap: remove an unused var |
| libdvbv5: add documentation for dvb-demux.h |
| libdvbv5: rename struct el_pid |
| libdvbv5: Add a description for DVB file entries |
| dvb-file.h: prepend parsing structs with "dvb_" |
| libdvbv5: rename enum file_formats to dvb_file_formats |
| libdvbv5: move PTABLE macro to the *.c files |
| libdvbv5: add documentation about format read/write functions |
| libdvbv5: Add documentation for other functions at dvb-file.h |
| libdvbv5: Document dvb-log.h and dvb-sat.h |
| libdvbv5: Remove an unused parameter at struct dvb_v5_descriptors |
| libdvbv5: remove unused parameter at dvb_scan_alloc_handler_table() |
| libdvbv5: add documentation for the DVB scan functions |
| libdvbv5: Document the libdvbv5 properties |
| libdvbv5: Document the last undocumented structs at dvb-file.h |
| libdvbv5: Convert documentation to javadoc format |
| Add support to generate Doxygen documentation for libdvbv5 |
| libdvbv5: Improve doxygen format |
| Ignore the generate doxygen-doc directory |
| libdvbv5: Fix function definitions at doxygen book |
| libdvbv5: Properly document macros at dvb-v5-std.h |
| libdvbv5: fix dvb_get_pmt_pid API |
| libdvbv5: improve doxygen documentation |
| libdvbv5 doxygen: Fix a few file descriptions |
| libdvbv5: Fix dvb_get_pmt_pid() |
| libdvbv5: Provide a quality indicator for DVB-T |
| libdvbv5: get rid of bcd_to_int() |
| libdvbv5: add documentation for descriptors.h |
| libdvbv5: Add more data about the descriptors definition |
| libdvbv5 doxygen: Some improvements for dvb-scan.h and descriptors.h |
| |
| |
| v4l-utils-1.3.90 (Development snapshot) |
| --------------------------------------- |
| |
| André Roth (1): |
| libdvbv5: provide crc32 to c++ |
| |
| Anton Arbring (20): |
| qv4l2: clarified two strings |
| qv4l2: changed and removed icons |
| qv4l2: correctly disable two menu items |
| qv4l2: added user controls |
| qv4l2: hiding disabled GUI items |
| qv4l2: alignment and size mods |
| qv4l2: added titles and moved settings |
| qv4l2: hiding disabled GUI items |
| qv4l2: alignment and size mods |
| qv4l2: added titles and moved settings |
| qv4l2: refactoring general-tab.cpp |
| qv4l2: bugfix and dynamic adjustments |
| qv4l2: removed colon and correct rowcount |
| qv4l2: added icon and moved label |
| qv4l2: added fullscreen functionality for capture window |
| qv4l2: added right click menu to capturewin |
| qv4l2: adding fullscreen option to toolbar main window |
| qv4l2: removed redundant set size |
| qv4l2: Removed bottom layout from capturewin |
| qv4l2: Adding width and height scaling to the status bar |
| |
| Gregor Jasny (8): |
| Start v4l-utils 1.3.x development |
| Revert "libdvbv5: Do not install libdvbv5 by default" |
| qv4l2: Fix typo |
| Fix kFreeBSD build |
| fixed BSDfication of V4L related headers |
| Disabled libdvbv5 and v4l-utils build |
| Hide parse_string.h content in shared library interface |
| Prefix exported functions with dvb_ |
| libv4l2: Lazily allocate convert_mmap_buf |
| qv4l2: Clean up icon distribution list |
| |
| Hans Verkuil (133): |
| qv4l2: add extensive colorspace support |
| v4l2-compliance: improve colorspace checks. |
| qv4l2: colorspace & opengl improvements |
| qv4l2: GL_RED is not supported everywhere, use GL_LUMINANCE. |
| qv4l2: add a 'blending' mode to test images with an alpha channel. |
| qv4l2: fix pixel aspect ratio calculation |
| qv4l2: revert most of the previous patch |
| qv4l2: fix compilation error if HAVE_QTGL is undefined |
| qv4l2: fix control range handling and broken slider disabling. |
| qv4l2: fix pixel aspect handling and set compose rectangle |
| qv4l2: add support for crop and compose |
| qv4l2: implement SEQ_TB/BT support for the openGL renderer |
| qv4l2: remove two forgotten debug printfs |
| qv4l2: make the destination sizeimage large enough |
| libv4l-mplane: copy back v4l2_buffer.m, fix type problems |
| libv4l-mplane: v4l2-compliance fixes |
| libv4l-mplane: fix compile warning |
| qv4l2: fix incorrect disabling of the blending mode |
| qv4l2: zero initial buffers |
| qv4l2: fix enabling/disable frame width/height/size |
| qv4l2: get rid of unused v4l2 class methods. |
| qv4l2: improve video output support, esp. multiplanar. |
| qv4l2: improve pixel aspect detection |
| v4l2-ctl: vastly improve the test pattern generator. |
| v4l2-ctl: add missing source chromakey support. |
| v4l2-ctl: the alpha flags are mutually exclusive. |
| v4l2-ctl: add support for generating limited range RGB |
| qv4l2: fix a bug in vidFieldChanged |
| v4l2-ctl: missing support for continuous frameintervals. |
| Revert "qv4l2: added titles and moved settings" |
| Revert "qv4l2: alignment and size mods" |
| Revert "qv4l2: hiding disabled GUI items" |
| qv4l2: fix broken handling of V4L2_VBI_INTERLACED. |
| qv4l2: fix sliced vbi support |
| qv4l2: fix height calculation when overriding pixel aspect ratio |
| v4l2-compliance: fix various VBI tests. |
| qv4l2: fix square aspect ratio handling and improve Video Aspect Ratio |
| qv4l2: refactor window size setting at capture start |
| qv4l2: reset size after changing aspect ratios or scaling mode |
| qv4l2: drop setSizeAdjustPolicy(QComboBox::AdjustToContents) |
| libv4l2rds: fix date-time handling |
| qv4l2: fix coverity defect |
| qv4l2: make tab labels more compact. |
| qv4l2: better handling of string controls with a step > 1 |
| libv4l2rds: handle V4L2_RDS_BLOCK_INVALID. |
| libv4l2rds: Area Coverage is only partially available for RBDS |
| rds-ctl: print RBDS call sign. |
| v4l2-compliance: fix control test |
| v4l2-compliance: only discrete framesizes are not allowed for output |
| libv4lconvert: add support for extended controls |
| libv4lcontrol: sync control strings/flags with the kernel |
| v4l2-compliance: allow frequency bands of just one frequency |
| qv4l2: fix a confusing error message when capturing VBI. |
| v4l2-compliance: improved v4l helpers header, add tracing |
| v4l2-compliance: add v4l2_format support to cv4l-helpers.h |
| v4l2-compliance: fix problems with vbi streaming. |
| qv4l2: always do updateVidCapFormat when changing crop/compose |
| qv4l2: m_useGLAct is only available if HAVE_QTGL is set. |
| qv4l2: add new png to the list of distributed files |
| qv4l2: use the new toolbutton for three buttons in the general tab |
| contrib/freebsd/Makefile.am: fix syntax error. |
| v4l-utils: update the headers to the latest kernel version. |
| v4l2-ctl: add support for the motion detection event |
| v4l2-ctl: add support for array controls |
| v4l2-ctl: allow setting/getting subsets |
| v4l-utils: add new V4L2_CAP_EXT_PIX_FORMAT capability |
| v4l2-compliance: check for the presence of V4L2_CAP_EXT_PIX_FORMAT |
| v4l2-ctl: add support for new extended format flags field. |
| v4l2-compliance: also check for V4L2_CAP_EXT_PIX_FORMAT in device_caps |
| qv4l2: add support for new alpha-aware pixelformats. |
| v4l2-ctl: add support for the new alpha-aware pixelformats. |
| libv4lconvert: add support for new pixelformats |
| v4l2-ctl: fix returned pixelformats that map to fbdev |
| qv4l2: bypass libv4l2 when obtaining the colorspace |
| qv4l2: fix a coverity defect |
| qv4l2: add the two new png's to the EXTRA_DIST list |
| v4l2-compliance: fix broken priv test |
| qv4l2: improve full-screen handling |
| qv4l2: center frame and drop margins in full screen mode |
| qv4l2: add Q shortcut to close the video window |
| qv4l2: QImage could be the wrong size |
| v4l2-compliance: reworked the (c)v4l-helpers.h headers |
| qv4l2: integrate with the cv4l-helpers.h header |
| qv4l2: force bytesperline recalculation when changing the width. |
| qv4l2: add Trace IOCTLs option |
| qv4l2: set the new value immediately when updating a control range. |
| qv4l2: correctly resubscribe events after a reopen. |
| qv4l2: add 'Use Record Priority' option |
| libv4lconvert: fix RGB32 conversion |
| qv4l2: use new control helpers |
| qv4l2: hopefully fix a i386 ubuntu build error |
| qv4l2: honor the fullscreen setting when starting capturing |
| qv4l2: bug fix in re-subscribing source change events |
| v4l-utils: sync with latest kernel |
| v4l2-ctl: print new SDR buffersize format field. |
| v4l2-compliance: add sdr buffersize check |
| qv4l2: support output devices |
| qv4l2: fix querystd and query_dv_timings |
| qv4l2: fix layout issues related to stacked widgets |
| v4l2-ctl: upgrade to the latest version of the test pattern generator |
| qv4l2: add SDR visualization. |
| v4l2-ctl: fix csc colorbar color pre-calculation |
| qv4l2: add support for output video devices |
| v4l-utils: sync with latest kernel headers |
| descriptors.h: include <arpa/inet.h> for ntohs |
| v4l2-ctl: --clear-bitmap or --clear-clips didn't actually clear it |
| v4l2-ctl/qv4l2: init mv_hor/vert_mode correctly. |
| v4l2-ctl: the field setting of the initially queued buffer is wrong. |
| qv4l2: implement cropping and composing for video output. |
| rds-ctl: changes in the TA bit weren't detected. |
| libv4l2rds: DI segment order was swapped |
| qv4l2: use setResdOnly for disabled QLineEdit controls |
| qv4l2: missed one more place where QLineEdits were disabled. |
| (c)v4l-helpers: fix broken tests for existence of ioctls. |
| qv4l2: convert the last direct ioctl calls to a cv4l-helper. |
| libv4l-mplane: make it aware of the extended pix_format fields |
| qv4l2: zero m_tpgLimRGBRange when the device is closed |
| qv4l2: use "ADC Frequency" for SDR instead of just "Frequency" |
| qv4l2: fix valgrind warnings |
| libv4l2: valgrind fixes |
| qv4l2: keep the "Controls" text |
| v4l2-ctl/qv4l2: sync to latest vivid-tpg.c |
| qv4l2: correct PAL pixel aspect values |
| v4l2-compliance: add test for S_EDID and the E2BIG corner case |
| qv4l2/v4l2-ctl: add support for 14x9 video aspect ratio. |
| v4l2-compliance: allow EIO for control ioctls |
| v4l2-compliance: reset control counters |
| qv4l2: fix segfault when openGL is not compiled in. |
| qv4l2: fix audio looping |
| qv4l2: allow '-d1' option |
| v4l2-ctl/qv4l2: fix movement counter calculation |
| qv4l2: fix broken SDR support |
| qv4l2: reset bytesperline when changing pixelformat. |
| |
| Marcel J.E. Mol (1): |
| [v4l-utils] keytable: add support for XMP IR protocol |
| |
| Mauro Carvalho Chehab (13): |
| dvbv5-zap: Fix LNBf selection |
| libdvbv5: Improve debug logs while scanning PMT |
| dvb-file: store services even when SDT is not found |
| dvb-file: better store channels without SDT |
| parse_usb.pl: fix handling of ./parse_tcpdump_log.pl logs |
| keytable: add a way to add all protocols on raw decoders |
| ir-keytable: add the list of supported protocols at man page |
| keytable: add support for sharp and mce-kbd protocols |
| parse_au0828.pl: Add a parser to help with au0828 debug |
| dvb-file: fix memory-deallocation bug |
| parse_au0828.pl: fix I2C read payload |
| keytable: Mask selected protocols with the supported ones |
| ir-keytable.1: add XMP protocol at manpage |
| |
| Ove Brynestad (15): |
| qv4l2: add and use storage for renderer independent frame info |
| qv4l2: move setFrame out of renderer specific classes |
| qv4l2: moved Qt scale/crop to common class |
| qv4l2: removed separate crop offset function |
| qv4l2: Made cropsize available to glengine |
| qv4l2: moved frame/rate count assignment to common class |
| qv4l2: moved crop calculation out of GL renderer |
| qv4l2: update common size variables at GL resize |
| qv4l2: moved scaling calculations from setRenderFrame |
| qv4l2: refactored capwin variables |
| qv4l2: refactor aspect size calculation |
| qv4l2: refactor crop size calculation |
| qv4l2: refactored cropSize to deliver cropped size |
| qv4l2: Fixed cropping bug |
| qv4l2: Add option to enable linear scaling filter |
| |
| Reynaldo H. Verdejo Pinochet (1): |
| [libdvbv5] dvb-sat: add universal Ku band (extended) LNBF def |
| |
| Rob Barker (1): |
| v4l-utils: libdvbv5: fix compilation issue |
| |
| Thiago Santos (1): |
| v4l2grab: Add threaded producer/consumer option |
| |
| |
| |
| v4l-utils-1.2.0 |
| --------------- |
| |
| Alain VOLMAT (1): |
| buildsystem: Fix configure.ac --disable-v4l-utils option |
| |
| Andreas Weber (2): |
| v4l2-ctl-misc.cpp: bugfix display #of readbuffers |
| v4l2gl/v4l2grab: fix errno assignment in while loop |
| |
| André Roth (43): |
| libdvbv5: VCT bitmap fixup |
| libdvbv5: fix NIT structures |
| libdvbv5: implement dvb_fe_dummy for logging |
| libdvbv5: prefix VCT with atsc_ instead of dvb_ |
| libdvbv5: fix missing includes |
| libdvbv5: cleanup dvb_nit_transport_foreach macro |
| libdvbv5: implement ATSC standard header |
| libdvbv5: implement MGT table parser |
| libdvbv5: implement ATSC EIT |
| libdvbv5: fix reading multisection tables |
| libdvbv5: service location descriptor support |
| libdvbv5: support info info log via dvb_loginfo |
| libdvbv5: fix asprintf compile warnings |
| libdvbv5: mpeg elementary stream parsers |
| libdvbv5: fix EIT parsing |
| libdvbv5: shared lib and installing headers |
| libdvbv5: remove header files from SOURCES in Makefile.am |
| libdvbv5: fix dvb_parse_descriptors and make dvb_desc_init private |
| libdvbv5: add attribute packed to structs and unions |
| libdvbv5: add parser for CAT |
| libdvbv5: add parser for ca and ca_identifier descriptors |
| libdvbv5: fix PMT parser |
| libdvbv5: cleanup printing tables and descriptors |
| libdvbv5: use DVB_DESC_HEADER macro in all descriptors |
| libdvbv5: make dvb_desc_default_init and dvb_desc_default_print private |
| libdvbv5: allow table parsers to get specific pointer to table struct |
| libdvbv5: descriptor parser return int |
| libdvbv5: remove unneeded includes |
| libdvbv5: fix lost ressource in atsc_eit |
| libdvbv5: add support for tables with multiple ts_id and section gaps |
| libdvbv5: reunite atsc_table_header and dvb_table_header |
| libdvbv5: fix asprintf compile warning in dvbv5-scan |
| libdvbv5: make crc32 public |
| libdvbv5: make dvb_table_filter_free public |
| libdvbv5: cleanup table parsers |
| libdvbv5: cleanup printing of tables and descriptors |
| libdvbv5: rename descriptor functions |
| libdvbv5: move table parsers to separate directory |
| libdvbv5: cleanup parser API |
| libdvbv5: short API description |
| libdvbv5: build dynamic libdvbv5 by default |
| libdvbv5: improve CRC size handling |
| libdvbv5: improve DVB header handling |
| |
| Antonio Ospite (1): |
| libv4lconvert: Fix a regression when converting from Y10B |
| |
| Antti Palosaari (1): |
| v4l2-ctl: add tuner support for SDR tuners |
| |
| Baard Eirik Winther (1): |
| qv4l2: Add cropping option to remove pillarbox |
| |
| BĂ¥rd Eirik Winther (33): |
| qv4l2: move function ctrlEvent |
| qv4l2: add hotkeys for common operations |
| qv4l2: fix minimum size in capture win to frame size |
| qv4l2: add Capture menu |
| qv4l2: new modular capture window design |
| qv4l2: add OpenGL rendering |
| qv4l2: alter capture menu |
| qv4l2: new ALSA stream source code |
| qv4l2: fix a bug where the alsa thread never stops |
| qv4l2: add ALSA stream to qv4l2 |
| qv4l2: add ALSA audio playback |
| qv4l2: fix YUY2 shader |
| qv4l2: fix black screen with opengl after capture |
| qv4l2: show frames option can be toggled during capture |
| qv4l2: add function getMargins |
| qv4l2: add video scaling for CaptureWin |
| qv4l2: add hotkey for reset scaling to frame size |
| qv4l2: add aspect ratio support |
| qv4l2: generalized opengl include guards |
| qv4l2: fix YUY2 shader |
| qv4l2: fix black screen with opengl after capture |
| qv4l2: show frames option can be toggled during capture |
| qv4l2: create function getMargins |
| qv4l2: add video scaling for CaptureWin |
| qv4l2: added resize to frame size in Capture menu |
| qv4l2: add hotkey for reset scaling to frame size |
| qv4l2: add pixel aspect ratio support for CaptureWin |
| qv4l2: change m_scaledFrame to m_scaledSize |
| qv4l2: fix missing status tips |
| qv4l2: fix program input parameters |
| qv4l2: add manpage |
| qv4l2: updated about window |
| qv4l2: fix GeneralTab layout |
| |
| Gregor Jasny (22): |
| Start v4l-utils 1.1.x development branch |
| libv4lconvert: Reject too short source buffer before accessing it |
| buildsystem: use subdir-objects automake option as suggested by automake |
| buildsystem: Do not specify library version for static libs |
| buildsystem: Use autoconf variable for symbol visibility flag |
| buildsystem: Use C99 by default |
| libdvbv5: Fix compiler warning about signedness |
| libv4lconvert: Add ASUS A7M to upside down table |
| libdvbv5: FIx check for available adaptation field |
| libdvbv5; Fix typo in MPEG TS print function |
| v4l2-ctl: Do not leak framebuffer handle in error paths |
| dvbv5-zap: Close open file descriptor in error path |
| dvbv5-zap: Always initialize status variable |
| libv4lconvert: Error out if source or destination pointers are null |
| libv4lconvert: Gracefully handle unknown SE401 destination formats |
| libdvbv5: Distribute internal header, too |
| mediactl: Distribute internal header, too |
| buildsystem: Distribute Android.mk files |
| v4l2-compliance: Distribute internal header, too |
| qv4l2: Distribute manpage |
| libdvbv5: Do not install libdvbv5 by default |
| Prepare for 1.2.0 release |
| |
| Hans Verkuil (130): |
| qv4l2: fix a segfault for native 32 bpp formats |
| Revert "qv4l2: add aspect ratio support" |
| Revert "qv4l2: add hotkey for reset scaling to frame size" |
| Revert "qv4l2: add video scaling for CaptureWin" |
| Revert "qv4l2: add function getMargins" |
| Revert "qv4l2: show frames option can be toggled during capture" |
| Revert "qv4l2: fix black screen with opengl after capture" |
| Revert "qv4l2: fix YUY2 shader" |
| qv4l2: add cropping to CaptureWin and Qt render |
| qv4l2: call setFrame before resize to get correct frame size calculation |
| rds-ctl: fix segfault in list_devices() |
| v4l2-ctl: fix '--set-dv-bt-timings query' option. |
| v4l2-ctl: properly close filehandles on error |
| v4l-utils: sync with latest kernel. |
| v4l2-ctl: set b.num_planes to 1 for single plane output formats. |
| qv4l2: crop: take pixel aspect ratio into account. |
| v4l2-compliance: check for invalid m2m + overlay caps |
| v4l2-compliance: check that streaming will fail for overlays |
| v4l2-ctl: use libv4l2 wrapper for mmap as well. |
| qv4l2: fix broken VBI support |
| v4l-utils: run sync-with-kernel, add ioctl32 tests for v4l2-subdev.h |
| v4l2-ctl: errors during streaming setup were ignored |
| libv4l2rds: update the list of AFs if the number of AFs changes |
| libv4l2rds: rename V4L2_RDS_FLAG_STATIC_PTY to _DYNAMIC_PTY |
| rds-ctl: add support for dynamic/static PTY |
| v4l2-ctl: --all should also show multiplanar formats. |
| v4l2-compliance: add bytesperline sanity check for multiplanar formats. |
| v4l2-compliance: add streaming tests |
| v4l2-compliance: fix broken test for V4L2_FRMIVAL_TYPE_CONTINUOUS |
| v4l2-ctl: add support for fields |
| v4l2-compliance: fix read() test and reopen after read/write |
| v4l2-ctl: automatically detect single/multiplanar buffer type. |
| v4l2-compliance: test streaming with bogus v4l2_buffer values. |
| v4l2-compliance: check if USERPTR is actually supported. |
| v4l2-compliance: restore the initial formats after testing S_FMT |
| v4l2-compliance: add EXPBUF and DMABUF streaming tests. |
| v4l2-compliance: test for invalid dmabuf file descriptors. |
| qv4l2: add combobox to select the field format. |
| v4l2-compliance: add tests for multiplanar capture. |
| v4l2-compliance: fix data_offset related tests |
| v4l2-ctl: fix regression when setting vidcap format |
| v4l2-compliance: move streaming setup code to main source. |
| v4l2-compliance: move functions around. |
| v4l2-compliance: Update fixme.txt |
| v4l2-compliance: fix BUF_TYPE vs CAP mixup. |
| v4l2-compliance: obtain expbuf caps and fix radio/vbi bug |
| v4l2-compliance: now support all formats in the streaming tests. |
| v4l2-ctl: is_mplane was never set. |
| v4l2-compliance: add new mmap tests. |
| v4l-utils: fix optional args for short opts |
| v4l2-ctl: set timestamp for output buffers. |
| v4l2-ctl: add streaming between two video devices using dmabuf |
| v4l2-ctl: the colorspace can now be set for outputs. |
| v4l2-ctl: improve the overlay support |
| v4l2-compliance: add M2M streaming support |
| v4l2-compliance: fill output buffers. |
| v4l2-compliance: fix check for correct return code for STREAMON. |
| v4l2-compliance: reopen node after each streaming test. |
| v4l2-compliance: change one warn to info. |
| v4l2-compliance: lower default framecount to 60. |
| v4l2-compliance: bypass libv4l2 for expbuf handling. |
| v4l2-compliance: improve clip checking |
| v4l2-compliance: add tests for output buffer error checking |
| v4l2-ctl: skip captured buffers with flag V4L2_BUF_FLAG_ERROR |
| qv4l2: ignore buffers with flag V4L2_BUF_FLAG_ERROR. |
| sync-with-kernel should also copy fb.h |
| v4l-utils: ran sync-with-kernel which added the fb.h header. |
| qv4l2: two field related fixes |
| qv4l2: support top/bottom/alternate field settings. |
| qv4l2: add check if the shader function is available. |
| v4l2-compliance: check for presence of a tuner/modulator |
| v4l2-compliance: improve format matching code. |
| qv4l2: initialize comboboxes with sensible initial sizes. |
| qv4l2: QUERYSTD returns STD_UNKNOWN if there is no standard |
| qv4l2: fix frequency handling |
| qv4l2: disable what shouldn't be touched while streaming. |
| v4l2-compliance: add tests for queuing operations with invalid indices. |
| v4l2-compliance: more nasty evil stream I/O checks |
| qv4l2: fix incorrect call to s_fmt when disabling width/height |
| qv4l2: fix incorrect handling of fields |
| v4l-utils: sync with latest kernel headers. |
| v4l2-ctl: add support for SDR FMT |
| v4l2-ctl: implement list SDR buffers command |
| v4l2-ctl: add timestamp source support. |
| v4l2-compliance: add timestamp source tests. |
| v4l2-ctl: add missing v4l2-ctl-sdr.cpp file. |
| v4l2-ctl: support SDR capture streaming. |
| v4l2-compliance: add SDR compliance tests. |
| v4l2-compliance: add 1HZ support when setting the frequency. |
| qv4l2: add SDR support. |
| qv4l2: use QDoubleSpinBox for frequency inputs |
| v4l2-compliance: support menu controls with more than 32 items |
| v4l2-ctl/compliance: use the correct mmap/munmap functions. |
| v4l2-ctl: add support for custom bytesperline values. |
| qv4l2: increase max width/height to 4K resolution. |
| v4l2-ctl: fix printing of buffer flags |
| v4l-utils: sync to latest kernel headers |
| v4l2-ctl: add --clear-edid option. |
| v4l2-ctl: rename old v4l2_subdev_edid and VIDIOC_SUBDEV_G/S_EDID |
| v4l2-compliance: add test setting all enumerated timings. |
| v4l2-compliance: add G/S_EDID tests. |
| libv4lconvert: remove broken ALTERNATE handling |
| v4l2-compliance: add helper headers |
| v4l2-compliance: use the new cv4l-helpers.h header. |
| v4l2-compliance: m2m devices should have only one input and output |
| v4l2-compliance: test control/format/codec ioctls for all inputs/outputs |
| qv4l2: add support for V4L2_PIX_FMT_NV16M/61M |
| v4l2-compliance: fix function pointer prototype. |
| v4l2-compliance: add missing 'class' keyword after 'friend' |
| v4l2-compliance: fix 32-bit compilation for v4l_fd_init() |
| qv4l2: only set m_isRadio if m_isSDR is true. |
| qv4l2: fix modulator frequency bugs |
| libv4lconvert: fix a v4l2-compliance error |
| v4l2-compliance: don't do the global format test when using libv4l2. |
| sync-with-kernel: update to latest kernel headers. |
| libdvbv5: fix compile error |
| v4l2-ctl: add support V4L2_EVENT_SOURCE_CHANGE |
| libdvbv5: generate the correct include in dvb-v5.c |
| Synced with latest kernel. |
| Add missing v4l2-mediabus.h |
| Synced with latest kernel |
| qv4l2: fix segmentation fault when compiled without ALSA support. |
| v4l2-compliance: fix broken querymenu check. |
| qv4l2: add support for the V4L2_EVENT_SOURCE_CHANGE event. |
| v4l2-compliance: don't warn about missing frameintervals |
| v4l2-ctl: add support to try/set raw VBI formats |
| v4lgrab/vbi-test: remove these utilities |
| qv4l2-qt3: remove utility |
| qv4l2: fix opengl support for RGB32/BGR32. |
| v4l2-compliance: M2M cap + input or output caps should be an error. |
| |
| Hans de Goede (6): |
| libv4lcontrol: Check control_flags before doing wildcard maching on upside_down |
| libv4lcontrol: Add Asus F3Sc with 04f2:b012 cam as upside down false positive |
| libv4l2: decomress-helper: close fds then wait for helper to exit |
| rc_keymaps: Add a keymap for the remote shipped with allwinner ba10 tv boxes |
| rc_keymaps: Add a keymap for the remote shipped with allwinner i12-a20 tv boxes |
| rc_keymaps: Add keymap for the remote shipped with the Wobo i5 tv box |
| |
| Hans-Christian Egtvedt (8): |
| v4l2-ctl: remove unnecessary inclusion of libv4l2.h |
| v4l2-compliance/ctl: drop libv4l2 dependency if NO_LIBV4L2 is defined |
| Add static configuration file for Android builds |
| v4l2-ctl/dbg: include android-config.h header file if ANDROID is set |
| v4l2-compliance: add Android.mk makefile |
| v4l2-ctl: add Android.mk makefile |
| v4l2-dbg: add Android.mk makefile |
| INSTALL: add cross compile and install procedures for Android |
| |
| Lad, Prabhakar (2): |
| libv4l: Update the README name for libv4l |
| libv4l: Update the link pointing the patch for porting the application to libv4l2 |
| |
| Laurent Pinchart (17): |
| Import the media-ctl utility and libraries |
| media-ctl: Rename source files |
| media-ctl: Remove the obsolete device argument from the help text |
| media-ctl: Document the --links option argument |
| media-ctl: Always print the full help message |
| media-ctl: Don't install libmediactl and libv4l2subdev |
| media-ctl: Update copyright years |
| media-ctl: Fix off-by-one buffer overflow with readlink |
| media-ctl: Fix media device version printing |
| media-ctl: Add fall through comment to fix Coverity warning |
| media-ctl: libv4l2subdev: Add DV timings support |
| media-ctl: Move flags printing code to a new print_flags function |
| media-ctl: Add DV timings support |
| Update sync-with-kernel to use installed kernel headers |
| wip |
| media-ctl: Pass a positive error value to strerror() |
| Revert "wip" |
| |
| Martin Bugge (1): |
| v4l2-ctl: add EDID get and set options |
| |
| Mauro Carvalho Chehab (166): |
| dvbv5-scan: Allow using separate adapter for FE and demux |
| libdvbv5: add descriptor parser for ATSC TVCT/CVCT tables |
| libdvbv5: fix VCT parsing |
| libdvbv5: Add ATSC specific descriptors |
| libdvbv5: add parser for ATSC service location |
| libdvbv5: Add support for additional descriptors at VCT table |
| libdvbv5: Add table ID of extra NIT/SDT tables |
| libdvbv5/dvb-scan: Modify to use the newer TS tables parser |
| libdvbv5: move DVB scan handler code to a separate file |
| libdvbv5: move handler code to a separate file |
| libdvbv5: move all tables structs to the handler data |
| libdvbv5: fixup parsing of PMT tables |
| libdvbv5: Add a parser for extension descriptors |
| libdvbv5/dvb-scan: handle allocation errors |
| libdvbv5/dvb-scan: be more verbose in debug mode |
| libdvbv5/dvb-scan: Fix a series of checks at buffer handling |
| libdvbv5/parse_string: don't free twice |
| libdvbv5: better handle memory errors |
| libdvbv5/descriptors: print descriptor number in hexadecimal |
| descriptors/nit: byte struct should be packed |
| libdvbv5/descriptors: Make easier to read/edit the descriptors table |
| libdvbv5: add support for ISDBT terrestrial system descriptor |
| libdvbv5: add parser for TS information descriptor |
| libdvbv5: Add descriptors for virtual channel number |
| libdvbv5: Add support for partial reception |
| libdvbv5: add suport for DVB-T2 delivery descriptor |
| libdvbv5: avoid playing with memory |
| libdvbv5/dvb-scan-table-handler:free the new table descriptors |
| libdvbv5: Add some missing code to free data |
| libdvbv5: Better handle program data |
| libdvbv5/dvb-fe: make valgrind happy |
| libdvbv5/descriptors: descriptors data should always be freed |
| libdvbv5/dvb-scan: fix memory leak |
| libdvbv5/dvb-scan-table-handler: remove free of unallocated structs |
| libdvbv5: produce dvb data from the new structures |
| libdvbv5/dvb-file: use the new descriptors for virtual channel |
| libdvbv5/dvb-file: fix allocation of dvb_file |
| libdvbv5/dvb-file: fix parameters for dvb_vchannel() |
| Fix desc_frequency_list descriptor |
| libdvbv5: add support for ATSC VCT table parsing |
| libdvbv5: On ATSC, only try to get SDT if VCT is not found |
| libdvbv5: don't leak memory on ATSC service location |
| dvb-fe: don't cause memory leak on open errors |
| dvbv5-scan: release resources on errors |
| libdvbv5/dvb-file: Allow using SDT for ATSC |
| libdvbv5/dvb-scan: avoid memory leak on table read timeout |
| dvb/dvbv5-zap: Fix help message |
| libdvbv5/dvb-scan: require PAT also for ATSC |
| libdvbv5/dvb-file: Fix the logic for program found check |
| libdvbv5/descriptors: Fix error handling routine |
| libdvbv5/descriptors: Fix extension descriptor handling |
| libdvbv5/descriptors: don't leak memory on error |
| libdvbv5/dvb-file: Don't leave memory leaks on channel store failure |
| libdvbv5: avoid nit to read out of the buffer |
| libdvbv5: be sure to not go past buffer on PAT parsing |
| libdvbv5: add multisection support for PAT table |
| libdvbv5: fix debug msg for Network PID |
| libdvbv5: don't cause crash if NIT is missing on fe-file.c |
| libdvbv5: Add missing dvb_dmx_stop() on error handling |
| libdvbv5: be sure to not go past buffer on PMT parsing |
| libdvbv5: be sure to not go past buffer on SDT parsing |
| libdvbv5: be sure to not go past buffer on VCT parsing |
| libdvbv5: shut up a few compilation warnings |
| libdvbv5: improve debug messages |
| libdvbv5/dvb-file: describe the service type on the logs |
| dvbv5-scan: move scanning code into dvb_scan_transponder() |
| libdvbv5: Re-add NIT transponders addition |
| libdvbv5: Re-add parser for ISDB-T NIT transponders addition |
| libdvbv5: Re-add parser for ISDB-T NIT transponders addition |
| libdvbv5: add support for DVB-S/S2 at NIT parser |
| libdvbv5: add support for DVB-T2 at NIT parser |
| libdvbv5: remove the remaining bits from the NIT parsers |
| libdvbv5: better implement the NIT parser |
| libdvbv5: properly handle ISDB-T partial reception |
| libdvbv5: get rid of dvb-scan-table-handler.[ch] |
| libdvbv5: handle NIT descriptors when verbose is not enabled |
| libdvbv5: Improve descriptor error logs |
| libdvbv5: Fix the size of the LCN descriptor |
| libdvbv5: some error handling improvements on dvb-file |
| libdvbv5/descriptors.c: fix two warnings |
| dvbv5-zap: allow using transponder frequency while in monitor mode |
| dvbv5-zap: make Valgrind happy |
| libdvbv5: clear data before setting a dmx filter |
| libdvbv5/dvb-demux: fix CodingStyle |
| dvbv5-zap: handle timeout also while in monitor mode |
| dvbv5-zap: exit nicely on SIGTERM/SIGINT |
| dvbv5-scan: handle SIGTERM/SIGINT nicely |
| dvbv5-zap: only handle SIGALRM if need |
| libdvbv5: fix extension descriptor handler |
| libdvbv5: fix T2 delivery descriptor handler |
| libdvbv5: fix dvb-scan handler for T2 descriptor |
| libdvbv5: fix terrestrial delivery constellation table |
| libdvbv5: change log level for the two nit handler messages |
| libdvbv5/dvb-scan: Remove dead code and add a check after realloc() |
| libdvbv5: don't use realloc() inside pat.c |
| dvbv5-scan: fix detection of duplicated freqs at the input file |
| libdvbv5: fix error condition on ATSC service location descriptor |
| libdvbv5: fix error condition on ISDBT delivery descriptor |
| libdvbv5: Fix other error conditions for out of memory |
| dvb5-zap: Better handle the MPEG TS header |
| libdvbv5/dvb-scan: all tables should have an specified size |
| libdvbv5: pack NIT table |
| libdvbv5: fix other error conditions for out of memory |
| libdvbv5: fix some out-of-bound acesses on hexdump() |
| libdvbv5: Simplify PAT handling |
| libdvbv5: simplify NIT table parser |
| libdvbv5: cleanup PAT table parser |
| libdvbv5: simplify PMT table parser |
| libdvbv5: simplify SDT table parser |
| libdvbv5: simplify VCT table parser |
| dvb/README: Remove some obsolete data |
| dvbv5-zap: fix all-pids record mode |
| libdvbv5: fix memory leak at ISDB partial reception handler |
| libdvbv5: Fix memory leak at TS info handler |
| dvb-fe: be a little less verbose with verbosity level 1 |
| dvbv5-zap: on all pids mode, we can use the frequency |
| dvbv5-zap: fix frontend status handling |
| dvbv5-zap: allow using a frequency for a channel on exit after tuning |
| libdvbv5: Fix a warning at isdb_desc_partial_reception_free |
| libdvbv5: fix retrieve parameters for ISDB-T |
| libdvbv5/dvb-fe: Fall back to v3 if needed |
| libdvbv5: Only discard the services not found |
| dvb-fe: fix using a DVB-T file for ISDB-T |
| dvb: simplify the logic that sets a (compat) DTV delivery system |
| dvb-scan: remove ISDB-T hack from it |
| libdvbv5: fix get_frontend logic |
| Replace my email address with the new one |
| libdvbv5: move store/retrieve functions upper |
| libdvbv5: better handle ATSC/Annex B |
| dvb-scan: fix a print message |
| descriptors: be sure to not read past the buffer |
| vct: avoid read descriptors past the buffer |
| dvb-demux: add code for DVB section filter |
| dvb: Fix VCT handling |
| dvb-scan: don't handle NIT table by default on ATSC |
| dvb-fe: Add support for setting the LNA before tuning |
| dvb: add support for LNA setting at scan and zap |
| dvb-fe: Use a separate call to change LNA settings |
| Add a parser for drxj |
| Revert "dvb-scan: don't handle NIT table by default on ATSC" |
| libdvbv5: better document some MPEG TS fields |
| libdvbv5: reimplement the logic that gets a full section |
| dvbv5-zap: only start audio filtering if audio PID > 0 |
| libdvbv5: Frequency is unsigned. use %u to print it |
| libdvbv5: fix ISDB-T frequency calculus on 32 bits machines |
| libdvbv5: move ISDB-T frq conversion to the descriptors code |
| libdvbv5: fix the area code size on ISDB-T |
| dvbv5-zap: fix usage of --record without --output |
| dvbv5-zap: Make dvbv5 as the default format |
| dvbv5-zap: better implement the --record flag |
| dvbv5-zap: only open the DVR interface if outputing |
| dvb-zap: fix --search argument |
| libdvbv5: Change license to LGPL v2.1 |
| libdvbv5: Remove two warnings on 32 bits compilation |
| Revert "libdvbv5: Change license to LGPL v2.1" |
| libdvbv5: don't override a parameter when setting lna |
| libdvbv5: Fix the speedup scan condition |
| dvb-file: Fix bandwidth handling at online write function |
| contrib: add a parser for dib0700 |
| parse_dib0700.pl: parse the remaining messages on dib0700 |
| parse_dib0700.pl: improve parser |
| parse_dib0700.pl: add support to identify delays |
| parse_dib0700.pl: Make the delays multiple of 10ms |
| parse_dib0700.pl: autoflush writes |
| parse_dib0700.pl: Parse REQUEST_SET_I2C_PARAM |
| parse_dib0700.pl: parse REQUEST_GET_VERSION |
| |
| Ricardo Ribalda Delgado (2): |
| libv4lconvert: Support for Y16 pixel format |
| libv4lconvert: Support for RGB32 and BGR32 format |
| |
| Rob Barker (1): |
| libdvbv5: Find other TS in NIT pointer fix |
| |
| Stefan Ringel (1): |
| v4l-utils: bugfix memory chunk |
| |
| Thiago Santos (1): |
| libv4l2: release the lock before doing a DQBUF |
| |
| |
| |
| v4l-utils-1.0.0 |
| --------------- |
| |
| Devin Heitmueller (1): |
| Don't call G_TUNER unless actually performing a tuning related call |
| |
| Diego Viola (1): |
| Fix spelling of Qt in .desktop file (typo) |
| |
| Gregor Jasny (20): |
| qv4l2: Silence Qt build tools invocation if silent mode is enabled |
| buildsystem: Do not bootstrap complete gettext for testing iconv |
| libdvb: Disable library installation by default |
| keytable: Always check if strtok return value is null |
| libv4lconvert: Prevent integer overflow by checking width and height |
| xc3082: Fix use after free in free_firmware() |
| libdvbv5: Fix reallocation in parse_lcn |
| rds-ctl: Always terminate strings properly |
| libdvbv5: Fix copy and paste error in parse_service() |
| libv4lconvert: Avoid division by 0 if gamma value is corrupted |
| pixfmt-test: Explicitely mention fall-through |
| v4l2-ctl: Do not read past end of num_planes array |
| libv4lconvert: Fix resource leak in sq905 error path |
| xc3028: Remove duplicate const |
| libdvbv5: Actually check for lock |
| libdvbv5: Free all memory in read_dvb_file error path |
| libdvbv5: Free all memory in parse_format_oneline error path |
| libdvbv5: Free tbl in dvb_read_section_with_id error paths |
| libdvbv5: Properly free temporary variables at end of parse_string |
| libdvbv5: Remove dead code in read_dvb_file. |
| |
| Guy Martin (6): |
| libdvbv5: Remove buggy parsing of extra DTV_foo parameters |
| libdvbv5: Add parsing of POLARIZATION |
| libdvbv5: Export dvb_fe_is_satellite() |
| libdvbv5: Fix satellite handling and apply polarization parameter to the frontend |
| libdvbv5: Use a temporary copy of the dvb parameters when tuning |
| dvbv5-zap: Parse the LNB from the channel file |
| |
| Hans Verkuil (20): |
| v4l2-dbg: remove unused source. |
| v4l2-compliance: refactor code to create invalid formats. |
| v4l2-compliance: improve overlay clipping tests. |
| v4l2-compliance: check that g_register fills the size field. |
| rds-ctl: fix percentage handling. |
| rds-ctl: support -d10 to refer to radio10. |
| v4l2-compliance: fix typo |
| v4l2-ctl: fix wrong array accesses in selection code. |
| v4l2-ctl: V4L2_BUF_TYPE_PRIVATE is no longer used. |
| Remove references to v4l2-chip-ident.h |
| Sync with latest 3.10.0-rc7 kernel. |
| libv4l2/log.c: add entry for new VIDIOC_DBG_G_CHIP_INFO ioctl. |
| Remove committed v4l2-chip-ident.h headers. |
| Sync with 3.11 kernel. |
| qv4l2: always update controls by default |
| libv4l2rds: fix coverity issues. |
| rds-ctl: fix coverity issues. |
| v4l2-dbg: fix coverity issues. |
| v4l2-ctl: fix coverity issues. |
| v4l2-ctl: (*XX).Foo -> XX->Foo |
| |
| Hans de Goede (3): |
| libv4l2: Add logging of dqbuf timestamps to debug logging |
| libv4l2: Add V4L2_PERROR convenience macro |
| libv4l2: do not log a ton of errors on device unplug |
| |
| Konke Radlow (3): |
| libv4l2rds: support RDS-EON and TMC-tuning info |
| rds-ctl: support RDS-EON and TMC-tuning info |
| libv4l2rds.c: moving functions to get rid of declarations |
| |
| Mauro Carvalho Chehab (3): |
| dvbv5-zap: sort the params by the key letter |
| dvbv5-zap: add an option to not filter pids |
| parse_string: fix encodings for Taiwan |
| |
| Ricardo Ribalda Delgado (1): |
| v4l2_compliance: -EINVAL is expected when ret is not 0 |
| |
| v4l-utils-0.9.5 |
| --------------- |
| |
| Gregor Jasny (1): |
| contrib: Add missing dist files for ioctl-test |
| |
| v4l-utils-0.9.4 |
| --------------- |
| |
| André Roth (3): |
| libv4l-mplane: Fix compile flags to allow anonymous unions with gcc 4.5.5 |
| libdvbv5: fix compile error |
| libdvbv5: fix anonymous unions on older gcc |
| |
| Antonio Ospite (2): |
| contrib/m920x/m920x_parse.pl: stricter check when extracting firmware |
| contrib/m920x/m920x_parse.pl: silence a warning |
| |
| Gregor Jasny (4): |
| libv4l: Add ASUS F2F with STK DC-1125 to upside down list |
| libv4l: Add Founder PC T14MF to upside down table |
| contrib: Add missing files to distribution list |
| |
| Hans Petter Selasky (1): |
| libv4l: Don't try to access sysfs 256 times when there is no sysfs |
| |
| Hans Verkuil (52): |
| qv4l2: add missing information for string and integer controls |
| qv4l2: add support for control events. |
| v4l2-compliance: allow EINVAL to be returned by S/TRY_FMT. |
| qv4l2: fix setting frequency for radio modulators |
| v4l-utils: sync with latest kernel. |
| v4l2-ctl: show used timestamp type. |
| v4l2-compliance: add check whether the timestamp is monotonic. |
| v4l-utils: fix make install problems with ln -s |
| v4l-utils: fix two 'dereferencing type-punned pointer' warnings |
| v4l2-compliance: reorganize verbosity options |
| ioctl-test: improve comments and add checks against ioctl num changes. |
| v4l2-compliance: improve read/write error reporting. |
| qv4l2: don't show "Query Standard" button if QUERYSTD isn't supported. |
| qv4l2: correctly update frame width and height for fixed resolutions. |
| v4l2-ctl: improve interval reporting. |
| v4l2-ctl: when streaming to file use bytesused instead of the full buffer. |
| v4l2-ctl: improve dv_timings reporting. |
| v4l2-ctl: support data_offset when streaming multiplanar formats. |
| v4l2-ctl: show buffers or key/P/B-frames when capturing. |
| v4l2-* utils: allow -d11 to refer to /dev/video11 |
| v4l-utils: run sync-with-kernel. |
| v4l2-ctl: add support for 'COPY' timestamp and ctrl range events. |
| v4l2-compliance: add support for the new 'COPY' timestamp type. |
| v4l2-compliance: missing check on the frameinterval |
| v4l2-compliance: improve tests when TRY/S_FMT returns EINVAL. |
| qv4l2: do nothing if querystd does not detect a standard. |
| qv4l2: handle control range updates. |
| libv4l2/log.c: update list of ioctls. |
| v4l2-compliance: fix s_std test: ENODATA is a valid error code. |
| v4l2-ctl: don't produce verbose output for QBUF while streaming. |
| qv4l2: fix the way interlaced formats are displayed |
| v4l2-ctl: fix the field-per-second calculation |
| qv4l2/v4l2-ctl: fix the fields-per-second calculation |
| qv4l2/v4l2-ctl: fix rounding error in field-per-second calculation |
| v4l2-ctl: add the --concise option. |
| v4l-utils: sync with kernel, remove all references to the DV_PRESET API. |
| v4l-utils: sync to the latest kernel. |
| v4l-utils: sync-with-kernel. |
| v4l2-compliance: remove ChipIdent tests |
| v4l2-ctl: set bytesused for streaming to the output. |
| v4l2-compliance: fix RDS + CAP_READWRITE tests. |
| v4l2-compliance: really fix the RDS and V4L2_CAP_READWRITE tests |
| v4l2-ctl: add eos and decoder-stop support. |
| v4l2-ctl: use references instead of pointers. |
| v4l2-ctl: fix a small bug in the stream-count/skip handling. |
| v4l2-ctl: split off test pattern generation in a separate source. |
| v4l2-ctl: small improvements. |
| v4l2-ctl: poll/non-poll behavior fixes |
| v4l2-ctl: find_pixel_format couldn't handle output streams. |
| v4l-utils: sync with latest kernel. |
| v4l2-dbg: replace CHIP_IDENT with CHIP_INFO. |
| v4l2-ctl: introduce buffers class to simplify the streaming code |
| |
| Jean Delvare (1): |
| dvbv5-zap: Fix build warning |
| |
| Laurent Pinchart (2): |
| v4l2-compliance: Print invalid return codes in control tests |
| v4l2-compliance: Print invalid error_idx values in control tests |
| |
| Mauro Carvalho Chehab (50): |
| ir-keytable: Add support for testing EV_ABS events |
| keytable: merge two identical structures into one |
| keytable: reorder functions to put similar code together |
| keytable: Add handler for EV_REL type |
| keytable: also print code for unknown/unhandled events |
| keytable: Put events in numeric order |
| keytable: Add the remaining other unhandled events |
| keytable: Make the parsing code more generic |
| keytable: properly print the other MSC_* event names |
| keytable: be clear when a value is in hexadecimal |
| keytable: always use hexadecimal values for scancodes |
| dvbv5-zap: Allow to enable FE debug |
| Sync with kernel, with DVB stats |
| dvb-fe: add support for DVBv5 stats |
| dvbv5-zap: use the new DVBv5 stats API |
| dvb-fe: Add a flag to indicate if DVBv5 stats is in use |
| dvb-fe: Improve BER measurements for DVBv5 |
| dvb-fe: Allow returning BER in a float value |
| dvbv5-zap: better display BER |
| dvb-fe: Add a method to report PER |
| dvb: Move the core of the stats logic to dvb-fe |
| dvb-fe: Fix PER statistics measurement |
| dvb-fe: Add support for a quality measurement |
| dvb: Rename a few DVB statistics |
| dvb: Add support for retrieving pre-BER data |
| dvb: use a macro for the number of Kernel stats |
| dvb: Better name the post-BER data |
| dvb: add support for pre-BER measurement |
| dvb: if the signal vanishes, bit/block error counters should vanish |
| dvbv5-zap: improve status display |
| dvbv5-scan: use library support for stats print |
| dvbv5-scan: also prints signal strength on tuner fail |
| ioctl-test: Auto-generate the list of ioctls to test |
| Add DVB headers to make sync-with-kernel |
| ioctl-test: expand it to also test DVB frontend/demux |
| dvbv5-scan: Fix get_signal logic |
| dvb-fe: Fix check for stats property |
| dvb-fe: Reserve space for the other DVBv5 properties |
| dvbv5-zap: Only go back if is there anything to clean |
| dvb5-scan: Improve output to better show the status |
| dvbv5-scan: don't be too verbose with status |
| dvb-scan: Don't call dvb_fe_get_stats() twice |
| dvb-fe: Supress statistics if signal lock vanishes |
| dvbv5-scan: timeout-multiply should also affect the timeout for scan |
| dvbv5-zap: add traffic monitor support |
| dvbv5-zap: output stats to stdout on monitor mode |
| dvbv5-zap: Better output at monitor mode |
| dvbv5-zap: don't stop monitoring for buffer underrun |
| dvbv5-zap: better represent low_traffic data in monitor mode |
| dvbv5-zap: print elapsed time when buffer overflow happens |
| |
| Riku Voipio (1): |
| v4l-utils: use openat when available |
| |
| Tzu-Jung Lee (2): |
| v4l2-ctl: break down the streaming_set() |
| v4l2-ctl: initial attempt to support M2M device streaming |
| |
| v4l-utils-0.9.3 |
| --------------- |
| * Synced with latest kernel headers |
| |
| * v4l2-ctl changes |
| * fixed bug in parse_subopt |
| * --list-buffers didn't work for multiplanar formats |
| |
| * v4l2-compliance |
| * work around missing ENODATA on (k)FreeBSD |
| * add test whether V4L2_MEMORY_DMABUF is supported |
| * add the new EXPBUF ioctl |
| |
| v4l-utils-0.9.2 |
| --------------- |
| * libv4l changes |
| * Add a libv4l plugin for mplane handling |
| |
| * v4l2-ctl changes |
| * load initial frames from the file as well |
| * add --stream-loop for streaming to an output |
| * zero bytesperline |
| |
| * test utility changes |
| * Add an OpenGL test application to test utilities in contrib |
| |
| * buildsystem changes |
| * Use udev pkgconfig file to populate installation directory |
| * Query Qt rcc tool location and fall back to rcc if not available |
| |
| v4l-utils-0.9.1 |
| --------------- |
| * libv4l changes |
| * Various Pixart JPEG fixes |
| * Add more notebooks to the upside down device table |
| * Use bytesperline instead of width (Robert Abel) |
| * Better luminance quantization table for Pixart JPEG (Jean-Francois Moine) |
| * Fix out of bounds array usage |
| * Prevent GCC 4.7 inlining error |
| * Add support for libjpeg >= v7 |
| * Add new matching algorithm for upside down table |
| * Retry with another frame on JPEG header decode errors |
| * Improved JL2005BCD support (Theodore Kilgore) |
| * Set errno to EIO if getting 4 consecutive EAGAIN convert errors |
| * Make software autowhitebalance converge faster |
| * Add quirk support for forced tinyjpeg fallback |
| |
| * ir-keytable changes |
| * Fixed file parsing errors |
| * Add support for Sanyo IR and RC-5-SZ protocol |
| * Add missing mouse buttons in shipped keytables |
| |
| * libdvbv5 changes |
| * Initial release |
| |
| * libv4l2rds and rds-ctl |
| * Initial release (Konke Radlow) |
| |
| * qv4l2 changes |
| * Fix segfault when there are no inputs or outputs |
| * Fix endianess issues |
| * Add support for new timing ioctls |
| * Improve frequency and radio support |
| * Add VBI support |
| * Add ability to make a snapshot |
| * Add support to stream raw frames into a file |
| |
| * buildsystem changes |
| * Converted buildsystem to autotools |
| * Made buildsystem cross compiling friendly |
| * Support out of tree builds |
| |
| v4l-utils-0.8.5 |
| --------------- |
| * Utils changes |
| * parse_em28xx_drxk.pl: New parser for dumps of em28xx with drxk frontend |
| (mchehab) |
| * qv4l2: Add support for bitmap controls (hverkuil) |
| * v4l2-ctl: add support for the new bitmask control type (hverkuil) |
| * v4l2-ctl: add support for the control event (hverkuil) |
| * v4l2-ctl: small bugfixes (hverkuil) |
| * v4l2-compliance: various new tests (hverkuil) |
| * lib_media_dev: various fixes / cleanups (hdegoede) |
| * libv4l changes |
| * Add some more laptop models to the upside down devices table (hdegoede) |
| * Add support for SE401 pixelformat (hdegoede) |
| * Software autogain tweaks (hdegoede) |
| |
| v4l-utils-0.8.4 |
| --------------- |
| * Utils changes |
| * Various small fixes (hverkuil, mchehab) |
| * qv4l2: Add support for configuring the framerate for devices which support |
| this like uvc cams (hdegoede) |
| * parse_tcpdump_log.pl: new parser for tcpdump / wireshark made usbmon |
| dumps (mchehab) |
| * New lib_media_dev lib, to pair audio devices with video devices |
| (and other combinations) for now this lives in utils and does not get |
| installed systemwide, as the API is not stable (mchehab) |
| * libv4l changes |
| * Add many more laptop models to the upside down devices table (hdegoede) |
| * Some small bugfixes (hdegoede) |
| * Add vicam cameras to list of cameras need sw auto gain + whitebalance |
| (hdegoede) |
| * Add support for M420 pixelformat (hdegoede) |
| * Add support for Y10B pixelformat (Antonio Ospite) |
| * Add support for JPGL pixelformat (jfmoine) |
| * Modified (rewrote) jpeg decompression code to use libjpeg[-turbo], for |
| much lower cpu load when doing jpeg decompression (hdegoede) |
| * Detect usb connection speed of devices (hdegoede) |
| * Rewrite src format selection algorithm, taking bandwidth into account and |
| choosing the format which will give us the lowest CPU load while still |
| allowing 30 fps (hdegoede) |
| * Intercept S_PARM and redo src format selection based on new fps setting, |
| potentially switching from JPG to YUYV / M420 when the app lowers the |
| fps, resulting in a significant lower cpu load (hdegoede) |
| |
| v4l-utils-0.8.3 |
| --------------- |
| * Utils changes: |
| * Various ir-keytable improvements (mchehab) |
| * Various cx231xx parser improvements (mchehab) |
| * libv4l changes |
| * Add a few more laptop models to the upside down devices table (hdegoede) |
| * Make libv4l1 compile with kernels >= 2.6.38, which no longer have the |
| v4l1 linux/videodev.h header (hdegoede) |
| |
| v4l-utils-0.8.2 |
| --------------- |
| * Utils changes: |
| * Various ir-keytable improvements (mchehab) |
| * Various qv4l2 fixes (hverkuil, hdegoede) |
| * Various v4l2-ctl fixes (hverkuil) |
| * Add parsers for cx231xx i2c, saa7134 pci, sn9c201 usb and generic usb |
| logs (mchehab) |
| * v4l2-compliance: lots of new tests (hverkuil) |
| * libv4l changes |
| * Add many more laptop models to the upside down devices table (hdegoede) |
| * Add support for 8-bits grey format (V4L2_PIX_FMT_GREY) (mchehab) |
| |
| v4l-utils-0.8.1 |
| --------------- |
| * Utils changes: |
| * Various v4l-keytable improvements (mchehab) |
| * Various qv4l2 fixes (hverkuil) |
| * v4l2-ctl: Added support for s/g_dv_timings (Mats Randgaard) |
| * libv4l changes (hdegoede): |
| * Add many more laptop models to the upside down devices table |
| * Detect short frames (and retry upto 3 times to get a non short frame) |
| * Support (uvc) cameras with more then 16 framesizes properly (Balint Reczey) |
| * libv4l1 no longer relies on the kernel v4l1 compat ioctl handling, many |
| thanks to Huzaifa Sidhpurwala for his work on this! |
| * Add support for Xirlink C-It YYVYUY |
| * Add support for konica yuv420 format |
| |
| v4l-utils-0.8.0 |
| --------------- |
| * Utils changes: |
| * Various v4l-keytable improvements (mchehab) |
| * Various v4l2-ctl fixes (hverkuil) |
| * Various qv4l2 fixes (hverkuil) |
| * libv4l changes (hdegoede): |
| * Add many more laptop models to the upside down devices table |
| * Some minor bugfixes |
| |
| v4l-utils-0.7.91 |
| ---------------- |
| * Utils changes: |
| * Improve v4l-keytable to better support IR (mchehab) |
| * Rename v4l-keytable to ir-keytable (mchehab) |
| * libv4l changes (hdegoede): |
| * Add more laptop models to the upside down devices table |
| * Ignore convert errors in the first few frames of a stream |
| |
| v4l-utils-0.7.90 |
| ---------------- |
| * This is the first release of v4l-utils, v4l-utils is the combination |
| of various v4l and dvb utilities which used to be part of v4l-dvb |
| mercurial kernel tree and libv4l. |
| * This first version is 0.7.90, as the version numbers continue were libv4l |
| as a standalone source archive stops. |
| * libv4l changes: |
| * Add more laptop models to the upside down devices table |
| * Fix Pixart JPEG ff ff ff xx markers removal, this fixes the occasional |
| corrupt frame we used to get (thanks to NĂ©meth MĂ¡rton) |
| * Enable whitebalance by default on various sonixj based cams |
| * Enable whitebalance + gamma correction by default on all sonixb cams |
| * Enable gamma correction by default on pac7302 based cams |
| |
| Note all history below this line only applies to libv4l and not to the utils |
| ---------------------------------------------------------------------------- |
| |
| libv4l-0.6.4 |
| ------------ |
| * Add more laptop models to the upside down devices table |
| * Add error checking to mr97310a decompression |
| * Increase mr97310a minimum clockdiv upon 3 consecutive decoding errors |
| * Add support for decompressing CPIA1 compressed YUV |
| * Speed up autogain algorithm |
| |
| libv4l-0.6.3 |
| ------------ |
| * Add more laptop models to the upside down devices table |
| * Improved mr97310a decompression |
| * Add support for decompressing yuv420 planar JPEG (one component per SOS, |
| 3 SOS per frame), this is needed for w9968cf based cams |
| * Add support for STV0680 raw bayer data |
| |
| libv4l-0.6.2 |
| ------------ |
| * Add more laptop models to the upside down devices table |
| * Put usb id in controls shm segment name for USB devices, to better |
| distuingish between devices plugged into the same port |
| * Enable software whitebalance and autogain for mr97310a cameras |
| * Improvements / tweaks to software autogain algorithm |
| |
| libv4l-0.6.1 |
| ------------ |
| * Add more laptop models to the upside down devices table |
| * Makefile changes to make life easier for the Debian package (Gregor Jasny) |
| * Bugfix: fixup 320x240 output for pac7302 cameras |
| * README improvements / clarifications (Bifferos) |
| * Bugfix: fix reqbuf Device or Resource busy error when using v4l2_read() |
| * Some applications want to use jpg format if possible, so do not hide |
| it from the apps (do not assume it always needs conversion) |
| * Change controls shm segment name to include the username, as it is only |
| writable by the user (this means libv4l controls are per user) (Gregor Jasny) |
| * Add support for decompressing sn9c2028 compressed bayer (Theodore Kilgore) |
| * Report V4L2_FMT_FLAG_EMULATED in v4l2_fmtdesc flags for emulated formats |
| |
| libv4l-0.6.0 |
| ------------ |
| * Recognize disabled controls and replace with fake equivalents where |
| available |
| * Add support for decompressing ov511 and ov518 "JPEG", by piping data through |
| an external helper as I've failed to contact Mark W. McClelland to get |
| permission to relicense the code. If you know a working email address for |
| Mark W. McClelland, please let me know. |
| * Add tons of laptop models to the upside down devices table |
| * Support for rgb565 source format by Mauro Carvalho Chehab |
| * Many bug fixes (see the mercurial tree for details) |
| * Improved pac207 decompression code to also support higher compression |
| modes of the pac207, which enables us to use higher framerates. |
| Many many thanks to Bertrik Sikken for figuring the decompression out! |
| |
| libv4l-0.5.99 |
| ------------- |
| * Link libv4lconvert with -lm for powf by Gregor Jasny |
| * Fix black screen on devices with hardware gamma control |
| * Fix crash with devices on which we do not emulate fake controls |
| * Add a patch by Hans Petter Selasky <hselasky@freebsd.org>, which should |
| lead to allowing use of libv4l (and the Linux webcam drivers ported |
| to userspace usb drivers) on FreeBSD, this is a work in progress |
| |
| libv4l-0.5.98 |
| ------------- |
| * Add software gamma correction |
| * Add software auto gain / exposure |
| * Add support for separate vflipping and hflipping |
| * Add fake controls controlling the software h- and v-flipping |
| * Add ability to determine upside down cams based on DMI info |
| * Add the capability to provide 320x240 to apps if the cam can only |
| do 320x232 (some zc3xx cams) by adding black borders |
| * Rewrite video processing code to make it easier to add more video filters |
| (and with little extra processing cost). As part of this the normalize |
| filter has been removed as it wasn't functioning satisfactory anyways |
| * Support V4L2_CTRL_FLAG_NEXT_CTRL for fake controls by Adam Baker |
| * Some makefile improvements by Gregor Jasny |
| * Various small bugfixes and tweaks |
| * The V4L2_ENABLE_ENUM_FMT_EMULATION v4l2_fd_open flag is obsolete, libv4l2 |
| now *always* reports emulated formats through the ENUM_FMT ioctl |
| |
| libv4l-0.5.97 |
| ------------- |
| * As the version number shows this is a beta release of the 0.6.x series, |
| the big change here is the addition of video processing to libv4l |
| currently this only does whitebalance and normalizing (which turns out |
| to be useless for most cams) but the basic framework for doing video |
| processing, and being able to control it through fake v4l2 controls using |
| for example v4l2ucp is there. |
| The initial version of this code was written by 3 of my computer science |
| students: Elmar Kleijn, Sjoerd Piepenbrink and Radjnies Bhansingh |
| * Currently whitebalancing gets enabled based on USB-ID's and it only gets |
| enabled for Pixart webcam's. You can force it being enabled with other |
| webcams by setting the environment variable LIBV4LCONTROL_CONTROLS, this |
| sets a bitmask enabling certain v4l2 controls which control the video |
| processing set it to 15 to enable both whitebalancing and normalize. You |
| can then change the settings using a v4l2 control panel like v4l2ucp |
| * Only report / allow supported destination formats in enum_fmt / try_fmt / |
| g_fmt / s_fmt when processing, rotating or flipping. |
| * Some applications / libs (*cough* gstreamer *cough*) will not work |
| correctly with planar YUV formats when the width is not a multiple of 8, |
| so crop widths which are not a multiple of 8 to the nearest multiple of 8 |
| when converting to planar YUV |
| * Add dependency generation to libv4l by: Gilles Gigan <gilles.gigan@gmail.com> |
| * Add support to use orientation from VIDIOC_ENUMINPUT by: |
| Adam Baker <linux@baker-net.org.uk> |
| * sn9c20x cams have occasional bad jpeg frames, drop these to avoid the |
| flickering effect they cause, by: Brian Johnson <brijohn@gmail.com> |
| * adjust libv4l's upside down cam detection to also work with devices |
| which have the usb interface as parent instead of the usb device |
| * fix libv4l upside down detection for the new v4l minor numbering scheme |
| * fix reading outside of the source memory when doing yuv420->rgb conversion |
| |
| libv4l-0.5.9 |
| ------------ |
| * Add support for MR97310A decompression by Kyle Guinn <elyk03@gmail.com> |
| * Add support for sq905c decompression by Theodore Kilgore |
| <kilgota@auburn.edu> |
| * Add hm12 support for the cx2341x MPEG encoder devices by Hans Verkuil |
| <hverkuil@xs4all.nl> |
| |
| libv4l-0.5.8 |
| ------------ |
| * Add support for UYVY (for USB Apple iSight) patch by Julien BLACHE |
| <jb@jblache.org> |
| * Remove v4lconvert_yvyu_to_yuv420 function as its functionality is |
| duplicate with v4lconvert_yuyv_to_yuv420 |
| * Use Requires.private where appropiate in .pc files (patch by Gregor Jasny) |
| * Switch to using USB-id's instead of USB product string, as not all devices |
| set a unique product string. This fixes the upside down issues with |
| genius e-messenger 112 cams |
| * Add support for sn9c20x-i420 format patch by Vasily Khoruzhick |
| <anarsoul@gmail.com> |
| |
| libv4l-0.5.7 |
| ------------ |
| * Fix a nasty (and stupid) bug in the special try_fmt handling for UVC cams |
| * Add some more verbose logging of various calls when asking libv4l to log |
| calls to a file, to assist in (future) debugging |
| |
| libv4l-0.5.6 |
| ------------ |
| * Always do a s_fmt on uvc cams even if this changes nothing, as not doing |
| the s_fmt triggers a bug in the uvcvideo driver in kernel <= 2.6.28 |
| (with certain cams) |
| |
| libv4l-0.5.5 |
| ------------ |
| * Avoid the use of try_fmt as much as possible on UVC cams, instead use the |
| results of the enum_framesizes ioctl. This is because: |
| 1) try_fmt actually causes IO with UVC cams making apps which do lot of |
| querrying of device capabilities slow (cheese) |
| 2) some buggy cams don't like getting lots of UVC video probes and crash |
| when they do |
| |
| libv4l-0.5.4 |
| ------------ |
| * Don't report DQBUF errors when errno is EAGAIN, this fixes flooding the |
| screen with errors when applications use non blocking mode |
| * Add support for downscaling to make apps which want low resolutions |
| (skype, spcaview) happy when used with cams which can only do high |
| resolutions (by LukĂ¡Å¡ Karas <lukas.karas@centrum.cz>). |
| * Add support for converting to YV12 planar (next to the already supported |
| YU12 / I420) |
| * Implement RGB/BGR24 -> YU/YV12 conversion |
| |
| libv4l-0.5.3 |
| ------------ |
| * When conversion requires multiple passes don't alloc the needed temporary |
| buffer on the stack, as some apps (ekiga) use so much stack themselves |
| this causes us to run out of stack space |
| |
| libv4l-0.5.2 |
| ------------ |
| * Add Philips SPC210NC to list of cams with upside down sensor, reported by |
| Rieker Flaik |
| * Work around some drivers (pwc) not properly reflecting what one gets after a |
| s_fmt in their try_fmt answer |
| * Check that s_fmt atleast gives us the width, height and pixelformat try_fmt |
| promised us, and if not disable conversion |
| * Only check width, height and pixelformat when checking if we are doing |
| conversion, instead of doing a memcmp, as that are the only things which |
| the convert code checks |
| * Take into account that the buffers only contain half of the lines when |
| field is V4L2_FIELD_ALTERNATE |
| |
| libv4l-0.5.1 |
| ------------ |
| * Add support for software cropping from 352x288 -> 320x240 / 176x144 -> |
| 160x120, so that apps which will only work with vga resolutions like |
| 320x240 (Skype!) will work with cams/drivers which do not support cropping |
| CIF resolutions to VGA resolutions in hardware. This makes all 2.6.27 gspca |
| supported cams, except for the pac7302 which only does 640x480 (and skype |
| wants 320x240), work with skype |
| * The v4lconvert_convert function was becoming a bit of a mess, so split the |
| functionailiy into separate v4lconvert_convert_pixfmt, v4lconvert_rotate and |
| v4lconvert_crop functions, and make v4lconvert_convert a frontend to |
| these |
| * Do not link the wrapper libs against libpthread (patch from Gregor Jasny) |
| |
| libv4l-0.5.0 |
| ------------ |
| * Add support for enumerating framesizes and frameintervals of emulated |
| formats when the driver supports it for the real format |
| * Make sure the video device always gets opened RW even if the application |
| asks for RO |
| * Add Genius E-Messenger 112 (093a:2476) to list of cams which have their |
| sensor upside down |
| |
| libv4l-0.4.3 |
| ------------ |
| * Add suport for YUYV and YVYU packed pixel formats (Jean-Francois Moine) |
| * Prefer compressed pixformats for resolutions > 176x144 |
| |
| libv4l-0.4.2 |
| ------------ |
| * The bayer pixel order in gspca's sonixb driver was different from that in |
| the sn9c102 driver from the mainline kernel, a recent gspca patch fixes |
| this, adjust libv4l to match (and make it work properly with the sn9c102 |
| driver). |
| |
| libv4l-0.4.1 |
| ------------ |
| * When the driver supports read() and we are not converting let the driver |
| handle read() instead of emulating it with mmap mode |
| * Fix errors and warnings when compiling with ICC (Gregor Jasny) |
| * Add support to libv4lconvert for rotating images 90 (for Pixart 7302 cams) |
| or 180 (Philips SPC200NC / Philips SPC300NC) degrees |
| * Add support for Pixart custom JPEG format |
| * Hide non public symbols (Gregor Jasny) |
| * Fix and enable x86_64 asm jpeg decompress helper functions (Gregor Jasny) |
| |
| libv4l-0.4.0 |
| ------------ |
| * Be more relaxed in our checks for mixing read and mmap access, we were |
| being more strict in this then certain kernel drivers (bttv) making xawtv |
| unhappy |
| * With some drivers the buffers must be mapped before queuing, so when |
| converting map the (real) buffers before calling the qbuf ioctl |
| * Add support for conversion to RGB24 (before we only supported BGR24) based |
| on a patch by Jean-Francois Moine |
| * When the hardware supports a format natively prefer using the native |
| version over converting from another supported format |
| * Various Makefile and pkgconfig file improvements by Gregor Jasny (Debian) |
| * Drop the appl-patches dir, all application patches are now available and |
| tracked here: http://linuxtv.org/v4lwiki/index.php/Libv4l_Progress |
| |
| |
| libv4l-0.3.9 |
| ------------ |
| * Not only see /dev/video* but also /dev/v4l/* as video devices |
| (only affects libv4l1 and the wrappers) patch from Brandon Philips |
| * Silence the creation of the .pc files in the Makefiles (Brandon Philips) |
| * Part of the copyright headers refered GPL instead of LGPL due to a copy |
| and paste error (Brandon Philips) |
| |
| |
| libv4l-0.3.8 |
| ------------ |
| * work around wrong REQUEST_BUFFERS ioctl return code from certain drivers |
| * add pkg-config (.pc) files for easier detection if libv4l is available |
| * check capabilities for streaming, if the driver cannot do streaming don't |
| insert ourselves between the application and the driver |
| * intercept get capabilites and report read capability (which we always offer) |
| * query buffer: indicate the mapping state of our (fake) buffer in the flags |
| |
| |
| libv4l-0.3.7 |
| ------------ |
| * Add spca505/6 and spca508 cam specific formats (YUYV per line variations) |
| |
| |
| libv4l-0.3.6 |
| ------------ |
| * Add missing COPYING.LIB file |
| |
| |
| libv4l-0.3.5 |
| ------------ |
| * Make JPEG decoding more robust |
| |
| |
| libv4l-0.3.4 (the brownpaperbag release) |
| ---------------------------------------- |
| * The mmap64 support in 0.3.3, has caused a bug in libv4l1 when running on |
| 32 bit systems (who uses those now a days?), this bug caused v4l1 |
| compatibility to not work at all, this release fixes this |
| * Some apps (xawtv, kopete) use an ioctl wrapper internally for various |
| reasons. This wrappers request argument is an int, but the real ioctl's |
| request argument is an unsigned long. Passing the VIDIOC_xxx defines through |
| to the wrapper, and then to the real ioctl, causes the request to get sign |
| extended on 64 bit args. The kernel seems to ignore the upper 32 bits, |
| causing the sign extension to not make a difference. libv4l now also |
| ignores the upper 32 bits of the libv4lx_ioctl request argument on 64 bit |
| archs |
| * Add a bugfix patch for kopete in the appl-patches dir, currently it assumes |
| that it got the width and height it asked for when doing a S_FMT, which is a |
| wrong assumption |
| |
| |
| libv4l-0.3.3 |
| ------------ |
| * Add open64 and mmap64 wrappers to the LD_PRELOAD wrapper libs, so that |
| they also work for applications compiled with FILE_OFFSET_BITS=64, this |
| fixes using them with v4l-info |
| * While looking at xawtv in general, found a few bugs in xawtv itself, added |
| a patch to fix those to the appl-patches dir |
| * Talking about the appl-patches dir, restore that as it accidentally got |
| dropped from 0.3.2 |
| * Be more verbose in various places when it comes to logging (esp errors) |
| * Change v4lconvert_enum_fmt code a bit, so that it is easier to add more |
| supported destination formats to libv4lconvert |
| * Don't return -EINVAL from try_fmt when we cannot convert because the cam |
| doesn't have any formats we know. Instead just return as format whatever the |
| cam returns from try_fmt, this new behavior is compliant with the v4l2 |
| api as documented |
| |
| libv4l-0.3.2 |
| ------------ |
| * Add support for converting from sn9c10x compressed data |
| * Add support for converting from pac207 compressed data |
| * Add "make install" Makefile target |
| |
| libv4l-0.3.1 |
| ------------ |
| * Only serialize V4L2_BUF_TYPE_VIDEO_CAPTURE type ioctls |
| * Do not return an uninitialized variable as result code for GPICT |
| (fixes vlc, but see below) |
| * Add an apps-patches directory which includes: |
| * vlc-0.8.6-libv4l1.patch, modify vlc's v4l1 plugin to directly call into |
| libv4l1, in the end we want all apps todo this as its better then |
| LD_PRELOAD tricks, but for vlc this is needed as vlc's plugin system |
| causes LD_PRELOAD to not work on symbols in the plugins |
| * camorama-0.19-fixes.patch, small bugfixes to camorama's v4l1 support, |
| this patch only fixes _real_ bugs in camorama and does not change it to |
| work with v4l1compat. Although it does work better with these bugs fixed |
| :) With this patch and LD_PRELOAD=<path>/v4l1compat.so it works |
| flawless. |
| |
| |
| libv4l-0.3 |
| ---------- |
| * add extern "C" magic to public header files for c++ usage (Gregor Jasny) |
| * Make libv4l1 and libv4l2 multithread use safe, see README.multi-threading |
| * Add v4lx_dup() calls (and intercept dup() from the wrappers) this fixes |
| use with gstreamer's v4l2 plugin (tested with cheese) |
| * Hopefully definitely fix compile errors on systems with a broken videodev2.h |
| |
| libv4l-0.2 |
| ---------- |
| *** API change *** |
| * Change v4lconvert api so that the v4lconvert struct always gets allocated |
| by the library, this to make it opaque, so that we can avoid future API |
| and ABI changes |
| * Add support for yuv420 -> bgr24 conversion |
| * When converting from v4l2 pixelformat to v4l12 palette return |
| VIDEO_PALETTE_YUV420P instead of VIDEO_PALETTE_YUV420 for |
| V4L2_PIX_FMT_YUV420 as that is what most apps seem to expect |
| * override kernel v4l1 compat min / max size with our own more accurate values |
| * fix v4l1 munmap bug where it didn't recognise the buffer being unmapped was |
| our fake buffer (fixes gstreamer v4l1 support, checked with cheese) |
| * add support for reporting the emulated pixelformats with ENUM_FMT, this |
| defaults to off, and can be activated by passing a flag to enable it to |
| v4l2_fd_open. This gets enabled by default the wrappers. |
| * v4l2: mmap the real device buffers before doing conversion when DQBUF gets |
| called before the application has called mmap (avoid crash). |
| |
| |
| libv4l-0.1 |
| ---------- |
| * major shuffle / rewrite now split into libv4l1, libv4l2, libv4lconvert |
| and 2 wrappers for binary compatibility |
| * rewritten LGPL bayer decoding |
| * many many other changes and fixes |
| |
| |
| v4l1-compat-0.6 (V4L2 apps stay working) |
| ---------------------------------------- |
| * Do not go into emulation mode of rgb24 immediately, but only after a |
| GPICT ioctl which has not been preceded by a SPICT ioctl, AKA do not get |
| in the way of V4L2 read calls by doing conversion on them |
| * Do not get in the way of mmap calls made by V4L2 applications |
| * Fix swapping of red and blue in bayer -> bgr24 decode routine |
| * Remember the v4l1 palette asked for with SPICT and return that, as |
| otherwise we loose information when going v4l1 -> v4l2 -> v4l1, for example |
| YUV420P becomes YUV420, which are separate in v4l1. |
| |
| |
| v4l1-compat-0.5 (perfect camorama) |
| ---------------------------------- |
| * Allow changing of format after the buffers have been mapped, by tearing |
| down the entire house, changing the fundament and then rebuilding it. |
| Now changing the capture resolution in camorama works! |
| * Fix jpeg decoding error reporting |
| * Allow jpeg's with a height which is a multiple of 8 (was 16) |
| * Remove a number of pretty new VIDIOCXXX -> string mappings from log.c, |
| fixing compiling with somewhat older kernels |
| |
| |
| v4l1-compat 0.4 |
| --------------- |
| * Do not even try to change the format in v4l1_compat_set_format(), unless |
| _really_ necessary. |
| * Cleanup ambigious use of src_format (no functional changes) |
| * Drop the mmap hack for zerocopy access under certain conditions, one of them |
| that the cam can deliver the requested format. Although avoiding the |
| memcpy in this scenarios is a good thing todo, there were several issues |
| with the 0.3 implementation of this, fixing all these means adding lots of |
| special cases all over the code. So instead we just drop support and |
| always do atleast a memcpy (or a conversion). If an application cannot |
| live with the speed penalty this imposes it should be ported to v4l2. |
| * Now that we've gotten rid of the zerocopy mmap hack, we can safely allow |
| mixing read and mmap based IO. |
| * Explictly include linux/ioctl.h, to fix compile with kernel headers where |
| linux/videodev.h doesn't. |
| |
| |
| v4l1-compat 0.3 |
| --------------- |
| * Don't allow multiple opens, in theory our code can handle it, but not all |
| v4l2 devices like it (ekiga does it and uvc doesn't like it). |
| |
| |
| v4l1-compat 0.2 |
| --------------- |
| * When mmap gets passed an fd of -1 (anonymous map) don't look for it in our |
| list of managed fds, as we use -1 to mark unused entries (fixes ekiga |
| crashing). Also check for an fd of -1 in the other calls we intercept. |
| * In close() start with removing the fd from our list of managed fds, this must |
| be done first, because as soon as we've done the actual close syscall, the |
| fd maybe returned by an open in another thread and we don't want to intercept |
| calls to this new fd. |
| * Make unknown v4l1 palette types a normal level log messages instead of an |
| error. |
| * When an applicaiton changes the width / height through the CMCAPTURE ioctl |
| remember the new width and height. |
| * If the devices initial v4l2 pixformat has no corresponding v4l1 palette, try |
| setting a format which does (and which we emulate when necessary) so that |
| applicactions which just query the current format (GPICT) and then take |
| whatever they get will work (partially fixes camorama) |
| * Implement our own SWIN instead of using kernel compat layer, for more |
| flexibility and better error checking |
| |
| |
| v4l1-compat 0.1 |
| --------------- |
| * Initial public release. |