| #!/bin/bash |
| # Copyright (c) 2012 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| set -e |
| |
| . /usr/local/factory/sh/common.sh |
| |
| FACTORY="$(dirname "$(dirname "$(readlink -f "$0")")")" |
| FACTORY_LOG_FILE=/var/factory/log/factory.log |
| SESSION_LOG_FILE=/var/log/factory_session.log |
| INTERACTIVE_CONSOLES="" |
| LOG_PROCESSES="" |
| |
| BOARD_SETUP="${FACTORY}/board/board_setup_factory.sh" |
| |
| # Put '/usr/local/factory/bin' at the head of PATH so that Goofy doesn't need to |
| # specify full path name when running factory binaries. |
| export PATH="/usr/local/factory/bin:${PATH}" |
| |
| # Default args for Goofy. |
| GOOFY_ARGS="" |
| PRESENTER_ARGS="" |
| |
| # Default implementation for factory_setup (no-op). May be overriden |
| # by board_setup_factory.sh. |
| factory_setup() { |
| true |
| } |
| |
| # Clean up when error happens. |
| on_error() { |
| local pid |
| # Try to show console because stopping UI may take a while. |
| show_interactive_console |
| stop -n ui >/dev/null 2>&1 || true |
| for pid in ${LOG_PROCESSES}; do |
| kill -9 "${pid}" & |
| done |
| # Show console again because stopping UI may change active console. |
| show_interactive_console |
| } |
| |
| # Initialize output system (create logs and redirect output). |
| init_output() { |
| echo "Redirecting output to ${SESSION_LOG_FILE}" |
| exec >"${SESSION_LOG_FILE}" 2>&1 |
| echo "New factory session: $(date +'%Y%m%d %H:%M:%s')" |
| |
| # When VT is available, TTYs were reserved as: |
| # 1 - UI (Chrome or X) |
| # 2 - getty (login) |
| # 3 - tail -f /var/log/factory.log |
| # So for Goofy session, we want to print the logs in following order: |
| # - /dev/tty4 if available (Systems with VT) |
| # - /dev/console if available |
| local tty |
| for tty in /dev/tty4 /dev/console $(tty); do |
| if [ -c "${tty}" ] && (echo "" >>"${tty}") 2>/dev/null; then |
| tail -f "${SESSION_LOG_FILE}" >>"${tty}" & |
| LOG_PROCESSES="${LOG_PROCESSES} $!" |
| INTERACTIVE_CONSOLES="${INTERACTIVE_CONSOLES} ${tty}" |
| fi |
| done |
| trap on_error EXIT |
| |
| # This should already exist, but just in case... |
| mkdir -p "$(dirname "${FACTORY_LOG_FILE}")" |
| touch "${FACTORY_LOG_FILE}" |
| # To help reading archived logs (not on DUT), we assume the FACTORY_LOG_FILE |
| # starts with /var and try to create the symlink as relative path. |
| ln -sf "../${FACTORY_LOG_FILE#/var/}" /var/log |
| |
| # Provide the latest factory log on TTY3 if available. |
| local tty_log=/dev/tty3 |
| if [ -c "${tty_log}" ]; then |
| setsid sh -c \ |
| "script -afqc 'while true; do less -W +F ${FACTORY_LOG_FILE}; done' \ |
| /dev/null <${tty_log} >${tty_log}" & |
| fi |
| } |
| |
| # Try to show the interactive console if available. |
| show_interactive_console() { |
| local tty |
| local vt_index |
| for tty in ${INTERACTIVE_CONSOLES}; do |
| vt_index="${tty#/dev/tty}" |
| if [ "${vt_index}" = "${tty}" ]; then |
| continue |
| fi |
| chvt "${vt_index}" && return || true |
| done |
| } |
| |
| # Load board-specific parameters, if any. |
| load_setup() { |
| if [ -s "${BOARD_SETUP}" ]; then |
| echo "Loading board-specific parameters ${BOARD_SETUP}..." |
| . "${BOARD_SETUP}" |
| fi |
| |
| if [[ -f ${AUTOMATION_MODE_TAG_FILE} ]]; then |
| local mode="$(cat ${AUTOMATION_MODE_TAG_FILE})" |
| if [[ -n "${mode}" ]]; then |
| echo "Enable factory test automation with mode: ${mode}" |
| GOOFY_ARGS="${GOOFY_ARGS} --automation-mode=${mode}" |
| fi |
| if [[ -f ${STOP_AUTO_RUN_ON_START_TAG_FILE} ]]; then |
| echo "Suppress test list auto-run on start" |
| GOOFY_ARGS="${GOOFY_ARGS} --no-auto-run-on-start" |
| fi |
| fi |
| |
| factory_setup |
| } |
| |
| # Checks disk usage and abort if running out of disk space. |
| check_disk_usage() { |
| # Show error in red |
| printf "\e[1;31m" |
| if "$FACTORY/bin/disk_space"; then |
| printf "\e[0m" |
| return |
| fi |
| echo " |
| /-\_ ___ ___ --------+ +--------| |
| \_ \ / |______ ________| |_________ |+----+ | | +----+ | |
| \ \ / _____. \ | .______________. | || | | | | | | |
| \_/ / / | | | | | | ||____| | | |____| | |
| | | | | | | | | | ____ | | ____ | |
| | | | | |_| /-| |-\_ |_| || | | | | | | |
| .--. _|/ __| | _/ / \_ \_ || | | | | | | |
| \ \ /_ | / / _/ _/ \ \ ||____| | | |____| | |
| \--\ \/ \___/ / / \_ \ | ______| |______ | |
| ---/ \ | || | | |
| ____________ \/ || ._________. | | |
| \ ._____. | ___________________ || | _______ | | | |
| /-+ | | | | |________ ________| || | | | | | | |
| | | \ | | / | | || | |_____| | | | |
| / / | \ _| | | | || | _____ | | | |
| | | \ \ / / | | || | | | | | | |
| / / \ v / | | || | |_____| | | | |
| | / _> < | | || |_________| | | |
| / | ___/ /\ \____ ._______| |________. || | | |
| |-/ /_____/ \______\ |__________________| |/ \_| |
| |
| _ _ ____ _ _ ____ _ _ _ |
| | \ | | ___ | _ \(_)___| | __ / ___| _ __ __ _ ___ ___| | | | |
| | \| |/ _ \ | | | | / __| |/ / \___ \| ._ \ / _\ |/ __/ _ \ | | | |
| | |\ | (_) | | |_| | \__ \ < ___) | |_) | (_| | (_| __/_|_|_| |
| |_| \_|\___/ |____/|_|___/_|\_\ |____/| .__/ \__,_|\___\___(_|_|_) |
| |_| |
| " |
| printf "\e[0m" |
| exit 1 |
| } |
| |
| # Initialize system TTY. |
| init_tty() { |
| # Preventing ttyN (developer shell console) to go blank after some idle time |
| local tty="" |
| for tty in /dev/tty[2-4]; do |
| (setterm -cursor on -blank 0 -powerdown 0 -powersave off |
| >"${tty}") 2>/dev/null || true |
| done |
| } |
| |
| # Initialize kernel modules and system daemons. |
| init_modules() { |
| # We disable powerd in factory image, but this folder is needed for some |
| # commands like power_supply_info to work. |
| mkdir -p /var/lib/power_manager |
| |
| # Preload modules here |
| modprobe i2c-dev 2>/dev/null || true |
| } |
| |
| # Initialize network settings. |
| init_network() { |
| # Make sure local loopback device is activated |
| ifconfig lo up |
| } |
| |
| start_factory() { |
| init_output |
| |
| echo " |
| Starting factory program... |
| |
| If you don't see factory window after more than one minute, |
| try to switch to VT2 (Ctrl-Alt-F2), log in, and check the messages by: |
| tail $SESSION_LOG_FILE $FACTORY_LOG_FILE |
| |
| If it keeps failing, try to reset by: |
| factory_restart -a |
| " |
| |
| load_setup |
| |
| init_modules |
| init_tty |
| init_network |
| |
| check_disk_usage |
| |
| if [ -z "$(status ui | grep start)" ]; then |
| echo "Request to start UI..." |
| start -n ui & |
| fi |
| |
| export DISPLAY=":0" |
| export XAUTHORITY="/home/chronos/.Xauthority" |
| |
| # Rules to start Goofy. Not this has to sync with init/startup. |
| local tag_device="${RUN_GOOFY_DEVICE_TAG_FILE}" |
| local tag_presenter="${RUN_GOOFY_PRESENTER_TAG_FILE}" |
| local run_device=true |
| |
| if [ -f "${tag_presenter}" ]; then |
| if [ -f "${tag_device}" ]; then |
| PRESENTER_ARGS="${PRESENTER_ARGS} --standalone" |
| GOOFY_ARGS="${GOOFY_ARGS} --standalone" |
| else |
| # Presenter-only. |
| run_device=false |
| fi |
| # Note presenter output is only kept in SESSION_LOG_FILE. |
| echo "Starting Goofy Presenter... ($PRESENTER_ARGS)" |
| "$FACTORY/bin/goofy_presenter" $PRESENTER_ARGS & |
| elif [ ! -f "${tag_device}" ]; then |
| # Monolithic mode. |
| GOOFY_ARGS="${GOOFY_ARGS} --monolithic" |
| fi |
| |
| if "${run_device}"; then |
| echo "Starting Goofy Device... ($GOOFY_ARGS)" |
| echo " |
| --- $(date +'%Y%m%d %H:%M:%S') Starting new Goofy session ($GOOFY_ARGS) --- |
| " >>"$FACTORY_LOG_FILE" |
| "$FACTORY/bin/goofy" $GOOFY_ARGS >>"$FACTORY_LOG_FILE" 2>&1 & |
| fi |
| |
| wait |
| } |
| |
| stop_factory() { |
| # Try to kill X, and any other Python scripts, five times. |
| echo -n "Stopping factory." |
| for i in $(seq 5); do |
| pkill 'python' || break |
| sleep 1 |
| echo -n "." |
| done |
| |
| echo " |
| |
| Factory tests terminated. To check error messages, try |
| tail ${SESSION_LOG_FILE} ${FACTORY_LOG_FILE} |
| |
| To restart, press Ctrl-Alt-F2, log in, and type: |
| factory_restart |
| |
| If restarting does not work, try to reset by: |
| factory_restart -a |
| " |
| } |
| |
| main() { |
| case "$1" in |
| "start" ) |
| start_factory "$@" |
| ;; |
| |
| "stop" ) |
| stop_factory "$@" |
| ;; |
| |
| * ) |
| echo "Usage: $0 [start|stop]" >&2 |
| exit 1 |
| ;; |
| esac |
| } |
| |
| main "$@" |
