blob: d6e64845ff34e084d385bef6bd7f44962913f823 [file] [log] [blame]
// Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "shill/wifi.h"
#include <stdio.h>
#include <string.h>
#include <netinet/ether.h>
#include <linux/if.h> // Needs definitions from netinet/ether.h
#include <algorithm>
#include <map>
#include <string>
#include <vector>
#include <base/bind.h>
#include <base/stringprintf.h>
#include <base/string_util.h>
#include <chromeos/dbus/service_constants.h>
#include <glib.h>
#include "shill/config80211.h"
#include "shill/control_interface.h"
#include "shill/dbus_adaptor.h"
#include "shill/device.h"
#include "shill/error.h"
#include "shill/geolocation_info.h"
#include "shill/ieee80211.h"
#include "shill/link_monitor.h"
#include "shill/logging.h"
#include "shill/manager.h"
#include "shill/metrics.h"
#include "shill/property_accessor.h"
#include "shill/proxy_factory.h"
#include "shill/rtnl_handler.h"
#include "shill/scope_logger.h"
#include "shill/shill_time.h"
#include "shill/supplicant_interface_proxy_interface.h"
#include "shill/supplicant_network_proxy_interface.h"
#include "shill/supplicant_process_proxy_interface.h"
#include "shill/technology.h"
#include "shill/wifi_endpoint.h"
#include "shill/wifi_provider.h"
#include "shill/wifi_service.h"
#include "shill/wpa_supplicant.h"
using base::Bind;
using base::StringPrintf;
using std::map;
using std::string;
using std::vector;
namespace shill {
// statics
const char WiFi::kSupplicantConfPath[] = SHIMDIR "/wpa_supplicant.conf";
const char *WiFi::kDefaultBgscanMethod =
wpa_supplicant::kNetworkBgscanMethodSimple;
const uint16 WiFi::kDefaultBgscanShortIntervalSeconds = 30;
const int32 WiFi::kDefaultBgscanSignalThresholdDbm = -50;
const uint16 WiFi::kDefaultScanIntervalSeconds = 180;
// Scan interval while connected.
const uint16 WiFi::kBackgroundScanIntervalSeconds = 3601;
// Age (in seconds) beyond which a BSS cache entry will not be preserved,
// across a suspend/resume.
const time_t WiFi::kMaxBSSResumeAgeSeconds = 10;
const char WiFi::kInterfaceStateUnknown[] = "shill-unknown";
const time_t WiFi::kRescanIntervalSeconds = 1;
const int WiFi::kNumFastScanAttempts = 3;
const int WiFi::kFastScanIntervalSeconds = 10;
const int WiFi::kPendingTimeoutSeconds = 15;
const int WiFi::kReconnectTimeoutSeconds = 10;
WiFi::WiFi(ControlInterface *control_interface,
EventDispatcher *dispatcher,
Metrics *metrics,
Manager *manager,
const string& link,
const string &address,
int interface_index)
: Device(control_interface,
dispatcher,
metrics,
manager,
link,
address,
interface_index,
Technology::kWifi),
provider_(manager->wifi_provider()),
weak_ptr_factory_(this),
proxy_factory_(ProxyFactory::GetInstance()),
time_(Time::GetInstance()),
supplicant_present_(false),
supplicant_state_(kInterfaceStateUnknown),
supplicant_bss_("(unknown)"),
need_bss_flush_(false),
resumed_at_((struct timeval){0}),
fast_scans_remaining_(kNumFastScanAttempts),
has_already_completed_(false),
is_debugging_connection_(false),
is_eap_in_progress_(false),
bgscan_short_interval_seconds_(kDefaultBgscanShortIntervalSeconds),
bgscan_signal_threshold_dbm_(kDefaultBgscanSignalThresholdDbm),
scan_pending_(false),
scan_interval_seconds_(kDefaultScanIntervalSeconds) {
PropertyStore *store = this->mutable_store();
store->RegisterDerivedString(
flimflam::kBgscanMethodProperty,
StringAccessor(
// TODO(petkov): CustomMappedAccessor is used for convenience because
// it provides a way to define a custom clearer (unlike
// CustomAccessor). We need to implement a fully custom accessor with
// no extra argument.
new CustomMappedAccessor<WiFi, string, int>(this,
&WiFi::ClearBgscanMethod,
&WiFi::GetBgscanMethod,
&WiFi::SetBgscanMethod,
0))); // Unused.
HelpRegisterDerivedUint16(store,
flimflam::kBgscanShortIntervalProperty,
&WiFi::GetBgscanShortInterval,
&WiFi::SetBgscanShortInterval);
HelpRegisterDerivedInt32(store,
flimflam::kBgscanSignalThresholdProperty,
&WiFi::GetBgscanSignalThreshold,
&WiFi::SetBgscanSignalThreshold);
// TODO(quiche): Decide if scan_pending_ is close enough to
// "currently scanning" that we don't care, or if we want to track
// scan pending/currently scanning/no scan scheduled as a tri-state
// kind of thing.
store->RegisterConstBool(flimflam::kScanningProperty, &scan_pending_);
HelpRegisterDerivedUint16(store,
flimflam::kScanIntervalProperty,
&WiFi::GetScanInterval,
&WiFi::SetScanInterval);
ScopeLogger::GetInstance()->RegisterScopeEnableChangedCallback(
ScopeLogger::kWiFi,
Bind(&WiFi::OnWiFiDebugScopeChanged, weak_ptr_factory_.GetWeakPtr()));
SLOG(WiFi, 2) << "WiFi device " << link_name() << " initialized.";
}
WiFi::~WiFi() {}
void WiFi::Start(Error *error, const EnabledStateChangedCallback &callback) {
SLOG(WiFi, 2) << "WiFi " << link_name() << " starting.";
if (enabled()) {
return;
}
OnEnabledStateChanged(EnabledStateChangedCallback(), Error());
if (error) {
error->Reset(); // indicate immediate completion
}
if (on_supplicant_appear_.IsCancelled()) {
// Registers the WPA supplicant appear/vanish callbacks only once per WiFi
// device instance.
on_supplicant_appear_.Reset(
Bind(&WiFi::OnSupplicantAppear, Unretained(this)));
on_supplicant_vanish_.Reset(
Bind(&WiFi::OnSupplicantVanish, Unretained(this)));
manager()->dbus_manager()->WatchName(wpa_supplicant::kDBusAddr,
on_supplicant_appear_.callback(),
on_supplicant_vanish_.callback());
}
// Connect to WPA supplicant if it's already present. If not, we'll connect to
// it when it appears.
ConnectToSupplicant();
Config80211 *config80211 = Config80211::GetInstance();
if (config80211) {
config80211->SetWifiState(Config80211::kWifiUp);
}
}
void WiFi::Stop(Error *error, const EnabledStateChangedCallback &callback) {
SLOG(WiFi, 2) << "WiFi " << link_name() << " stopping.";
DropConnection();
StopScanTimer();
for (EndpointMap::iterator it = endpoint_by_rpcid_.begin();
it != endpoint_by_rpcid_.end(); ++it) {
provider_->OnEndpointRemoved(it->second);
}
endpoint_by_rpcid_.clear();
for (ReverseServiceMap::const_iterator it = rpcid_by_service_.begin();
it != rpcid_by_service_.end(); ++it) {
RemoveNetwork(it->second);
}
rpcid_by_service_.clear();
supplicant_interface_proxy_.reset(); // breaks a reference cycle
// TODO(quiche): Remove interface from supplicant.
supplicant_process_proxy_.reset();
current_service_ = NULL; // breaks a reference cycle
pending_service_ = NULL; // breaks a reference cycle
is_debugging_connection_ = false;
SetScanPending(false);
StopPendingTimer();
StopReconnectTimer();
OnEnabledStateChanged(EnabledStateChangedCallback(), Error());
if (error)
error->Reset(); // indicate immediate completion
weak_ptr_factory_.InvalidateWeakPtrs();
SLOG(WiFi, 3) << "WiFi " << link_name() << " supplicant_process_proxy_ "
<< (supplicant_process_proxy_.get() ?
"is set." : "is not set.");
SLOG(WiFi, 3) << "WiFi " << link_name() << " supplicant_interface_proxy_ "
<< (supplicant_interface_proxy_.get() ?
"is set." : "is not set.");
SLOG(WiFi, 3) << "WiFi " << link_name() << " pending_service_ "
<< (pending_service_.get() ? "is set." : "is not set.");
SLOG(WiFi, 3) << "WiFi " << link_name() << " has "
<< endpoint_by_rpcid_.size() << " EndpointMap entries.";
}
void WiFi::Scan(Error */*error*/) {
LOG(INFO) << __func__;
// Needs to send a D-Bus message, but may be called from D-Bus
// signal handler context (via Manager::RequestScan). So defer work
// to event loop.
dispatcher()->PostTask(Bind(&WiFi::ScanTask, weak_ptr_factory_.GetWeakPtr()));
}
void WiFi::BSSAdded(const ::DBus::Path &path,
const map<string, ::DBus::Variant> &properties) {
// Called from a D-Bus signal handler, and may need to send a D-Bus
// message. So defer work to event loop.
dispatcher()->PostTask(Bind(&WiFi::BSSAddedTask,
weak_ptr_factory_.GetWeakPtr(),
path, properties));
}
void WiFi::BSSRemoved(const ::DBus::Path &path) {
// Called from a D-Bus signal handler, and may need to send a D-Bus
// message. So defer work to event loop.
dispatcher()->PostTask(Bind(&WiFi::BSSRemovedTask,
weak_ptr_factory_.GetWeakPtr(), path));
}
void WiFi::Certification(const map<string, ::DBus::Variant> &properties) {
dispatcher()->PostTask(Bind(&WiFi::CertificationTask,
weak_ptr_factory_.GetWeakPtr(), properties));
}
void WiFi::EAPEvent(const string &status, const string &parameter) {
dispatcher()->PostTask(Bind(&WiFi::EAPEventTask,
weak_ptr_factory_.GetWeakPtr(),
status,
parameter));
}
void WiFi::PropertiesChanged(const map<string, ::DBus::Variant> &properties) {
SLOG(WiFi, 2) << __func__;
// Called from D-Bus signal handler, but may need to send a D-Bus
// message. So defer work to event loop.
dispatcher()->PostTask(Bind(&WiFi::PropertiesChangedTask,
weak_ptr_factory_.GetWeakPtr(), properties));
}
void WiFi::ScanDone() {
LOG(INFO) << __func__;
// Defer handling of scan result processing, because that processing
// may require the the registration of new D-Bus objects. And such
// registration can't be done in the context of a D-Bus signal
// handler.
dispatcher()->PostTask(Bind(&WiFi::ScanDoneTask,
weak_ptr_factory_.GetWeakPtr()));
}
void WiFi::ConnectTo(WiFiService *service,
map<string, DBus::Variant> service_params) {
CHECK(service) << "Can't connect to NULL service.";
DBus::Path network_path;
// TODO(quiche): Handle cases where already connected.
if (pending_service_ && pending_service_ == service) {
// TODO(quiche): Return an error to the caller. crosbug.com/23832
LOG(INFO) << "WiFi " << link_name() << " ignoring ConnectTo service "
<< service->unique_name()
<< ", which is already pending.";
return;
}
if (pending_service_ && pending_service_ != service) {
DisconnectFrom(pending_service_);
}
Error unused_error;
network_path = FindNetworkRpcidForService(service, &unused_error);
if (network_path.empty()) {
try {
const uint32_t scan_ssid = 1; // "True": Use directed probe.
service_params[wpa_supplicant::kNetworkPropertyScanSSID].writer().
append_uint32(scan_ssid);
AppendBgscan(service, &service_params);
network_path = supplicant_interface_proxy_->AddNetwork(service_params);
CHECK(!network_path.empty()); // No DBus path should be empty.
rpcid_by_service_[service] = network_path;
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "exception while adding network: " << e.what();
return;
}
}
if (service->HasRecentConnectionIssues()) {
SetConnectionDebugging(true);
}
supplicant_interface_proxy_->SelectNetwork(network_path);
SetPendingService(service);
CHECK(current_service_.get() != pending_service_.get());
// SelectService here (instead of in LinkEvent, like Ethernet), so
// that, if we fail to bring up L2, we can attribute failure correctly.
//
// TODO(quiche): When we add code for dealing with connection failures,
// reconsider if this is the right place to change the selected service.
// see discussion in crosbug.com/20191.
SelectService(service);
}
void WiFi::DisconnectFrom(WiFiService *service) {
if (service != current_service_ && service != pending_service_) {
// TODO(quiche): Once we have asynchronous reply support, we should
// generate a D-Bus error here. (crosbug.com/23832)
LOG(WARNING) << "In " << __func__ << "(): "
<< " ignoring request to disconnect from service "
<< service->unique_name()
<< " which is neither current nor pending";
return;
}
if (pending_service_ && service != pending_service_) {
// TODO(quiche): Once we have asynchronous reply support, we should
// generate a D-Bus error here. (crosbug.com/23832)
LOG(WARNING) << "In " << __func__ << "(): "
<< " ignoring request to disconnect from service "
<< service->unique_name()
<< " which is not the pending service.";
return;
}
if (!pending_service_ && service != current_service_) {
// TODO(quiche): Once we have asynchronous reply support, we should
// generate a D-Bus error here. (crosbug.com/23832)
LOG(WARNING) << "In " << __func__ << "(): "
<< " ignoring request to disconnect from service "
<< service->unique_name()
<< " which is not the current service.";
return;
}
if (pending_service_) {
// Since wpa_supplicant has not yet set CurrentBSS, we can't depend
// on this to drive the service state back to idle. Do that here.
pending_service_->SetState(Service::kStateIdle);
}
SetPendingService(NULL);
StopReconnectTimer();
if (!supplicant_present_) {
LOG(ERROR) << "In " << __func__ << "(): "
<< "wpa_supplicant is not present; silently resetting "
<< "current_service_.";
if (current_service_ == selected_service()) {
DropConnection();
}
current_service_ = NULL;
return;
}
try {
supplicant_interface_proxy_->Disconnect();
// We'll call RemoveNetwork and reset |current_service_| after
// supplicant notifies us that the CurrentBSS has changed.
} catch (const DBus::Error &e) { // NOLINT
// Can't depend on getting a notification of CurrentBSS change.
// So effect changes immediately. For instance, this can happen when
// a disconnect is triggered by a BSS going away.
Error unused_error;
RemoveNetworkForService(service, &unused_error);
if (service == selected_service()) {
DropConnection();
}
current_service_ = NULL;
}
CHECK(current_service_ == NULL ||
current_service_.get() != pending_service_.get());
}
bool WiFi::DisableNetwork(const ::DBus::Path &network) {
scoped_ptr<SupplicantNetworkProxyInterface> supplicant_network_proxy(
proxy_factory_->CreateSupplicantNetworkProxy(
network, wpa_supplicant::kDBusAddr));
try {
supplicant_network_proxy->SetEnabled(false);
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "DisableNetwork for " << network << " failed.";
return false;
}
return true;
}
bool WiFi::RemoveNetwork(const ::DBus::Path &network) {
try {
supplicant_interface_proxy_->RemoveNetwork(network);
} catch (const DBus::Error &e) { // NOLINT
// RemoveNetwork can fail with three different errors.
//
// If RemoveNetwork fails with a NetworkUnknown error, supplicant has
// already removed the network object, so return true as if
// RemoveNetwork removes the network object successfully.
//
// As shill always passes a valid network object path, RemoveNetwork
// should not fail with an InvalidArgs error. Return false in such case
// as something weird may have happened. Similarly, return false in case
// of an UnknownError.
if (strcmp(e.name(), wpa_supplicant::kErrorNetworkUnknown) != 0) {
return false;
}
}
return true;
}
bool WiFi::IsIdle() const {
return !current_service_ && !pending_service_;
}
void WiFi::ClearCachedCredentials(const WiFiService *service) {
Error unused_error;
RemoveNetworkForService(service, &unused_error);
}
void WiFi::NotifyEndpointChanged(const WiFiEndpointConstRefPtr &endpoint) {
WiFiService *service = provider_->FindServiceForEndpoint(endpoint);
DCHECK(service);
if (service) {
service->NotifyEndpointUpdated(endpoint);
}
}
void WiFi::AppendBgscan(WiFiService *service,
map<string, DBus::Variant> *service_params) const {
int scan_interval = kBackgroundScanIntervalSeconds;
string method = bgscan_method_;
if (method.empty()) {
// If multiple APs are detected for this SSID, configure the default method.
// Otherwise, disable background scanning completely.
if (service->GetEndpointCount() > 1) {
method = kDefaultBgscanMethod;
} else {
LOG(INFO) << "Background scan disabled -- single Endpoint for Service.";
return;
}
} else if (method.compare(wpa_supplicant::kNetworkBgscanMethodNone) == 0) {
LOG(INFO) << "Background scan disabled -- chose None method.";
return;
} else {
// If the background scan method was explicitly specified, honor the
// configured background scan interval.
scan_interval = scan_interval_seconds_;
}
DCHECK(!method.empty());
string config_string = StringPrintf("%s:%d:%d:%d",
method.c_str(),
bgscan_short_interval_seconds_,
bgscan_signal_threshold_dbm_,
scan_interval);
LOG(INFO) << "Background scan: " << config_string;
(*service_params)[wpa_supplicant::kNetworkPropertyBgscan].writer()
.append_string(config_string.c_str());
}
string WiFi::GetBgscanMethod(const int &/*argument*/, Error */* error */) {
return bgscan_method_.empty() ? kDefaultBgscanMethod : bgscan_method_;
}
void WiFi::SetBgscanMethod(
const int &/*argument*/, const string &method, Error *error) {
if (method != wpa_supplicant::kNetworkBgscanMethodSimple &&
method != wpa_supplicant::kNetworkBgscanMethodLearn &&
method != wpa_supplicant::kNetworkBgscanMethodNone) {
const string error_message =
StringPrintf("Unrecognized bgscan method %s", method.c_str());
LOG(WARNING) << error_message;
error->Populate(Error::kInvalidArguments, error_message);
return;
}
bgscan_method_ = method;
// We do not update kNetworkPropertyBgscan for |pending_service_| or
// |current_service_|, because supplicant does not allow for
// reconfiguration without disconnect and reconnect.
}
void WiFi::SetBgscanShortInterval(const uint16 &seconds, Error */*error*/) {
bgscan_short_interval_seconds_ = seconds;
// We do not update kNetworkPropertyBgscan for |pending_service_| or
// |current_service_|, because supplicant does not allow for
// reconfiguration without disconnect and reconnect.
}
void WiFi::SetBgscanSignalThreshold(const int32 &dbm, Error */*error*/) {
bgscan_signal_threshold_dbm_ = dbm;
// We do not update kNetworkPropertyBgscan for |pending_service_| or
// |current_service_|, because supplicant does not allow for
// reconfiguration without disconnect and reconnect.
}
void WiFi::SetScanInterval(const uint16 &seconds, Error */*error*/) {
scan_interval_seconds_ = seconds;
if (running()) {
StartScanTimer();
}
// The scan interval affects both foreground scans (handled by
// |scan_timer_callback_|), and background scans (handled by
// supplicant). However, we do not update |pending_service_| or
// |current_service_|, because supplicant does not allow for
// reconfiguration without disconnect and reconnect.
}
void WiFi::ClearBgscanMethod(const int &/*argument*/, Error */*error*/) {
bgscan_method_.clear();
}
void WiFi::CurrentBSSChanged(const ::DBus::Path &new_bss) {
SLOG(WiFi, 3) << "WiFi " << link_name() << " CurrentBSS "
<< supplicant_bss_ << " -> " << new_bss;
supplicant_bss_ = new_bss;
supplicant_tls_error_ = "";
has_already_completed_ = false;
// Any change in CurrentBSS means supplicant is actively changing our
// connectivity. We no longer need to track any previously pending
// reconnect.
StopReconnectTimer();
if (new_bss == wpa_supplicant::kCurrentBSSNull) {
HandleDisconnect();
if (!provider_->GetHiddenSSIDList().empty()) {
// Before disconnecting, wpa_supplicant probably scanned for
// APs. So, in the normal case, we defer to the timer for the next scan.
//
// However, in the case of hidden SSIDs, supplicant knows about
// at most one of them. (That would be the hidden SSID we were
// connected to, if applicable.)
//
// So, in this case, we initiate an immediate scan. This scan
// will include the hidden SSIDs we know about (up to the limit of
// kScanMAxSSIDsPerScan).
//
// We may want to reconsider this immediate scan, if/when shill
// takes greater responsibility for scanning (vs. letting
// supplicant handle most of it).
Scan(NULL);
}
} else {
HandleRoam(new_bss);
}
// Reset eap_in_progress_ after calling HandleDisconnect() so it can
// be used to detect disconnects during EAP authentication.
is_eap_in_progress_ = false;
// If we are selecting a new service, or if we're clearing selection
// of a something other than the pending service, call SelectService.
// Otherwise skip SelectService, since this will cause the pending
// service to be marked as Idle.
if (current_service_ || selected_service() != pending_service_) {
SelectService(current_service_);
}
// Invariant check: a Service can either be current, or pending, but
// not both.
CHECK(current_service_.get() != pending_service_.get() ||
current_service_.get() == NULL);
// If we are no longer debugging a problematic WiFi connection, return
// to the debugging level indicated by the WiFi debugging scope.
if ((!current_service_ || !current_service_->HasRecentConnectionIssues()) &&
(!pending_service_ || !pending_service_->HasRecentConnectionIssues())) {
SetConnectionDebugging(false);
}
}
void WiFi::HandleDisconnect() {
// Identify the affected service. We expect to get a disconnect
// event when we fall off a Service that we were connected
// to. However, we also allow for the case where we get a disconnect
// event while attempting to connect from a disconnected state.
WiFiService *affected_service =
current_service_.get() ? current_service_.get() : pending_service_.get();
current_service_ = NULL;
if (!affected_service) {
SLOG(WiFi, 2) << "WiFi " << link_name()
<< " disconnected while not connected or connecting";
return;
}
if (affected_service == selected_service()) {
// If our selected service has disconnected, destroy IP configuration state.
DropConnection();
}
Error error;
if (!DisableNetworkForService(affected_service, &error)) {
if (error.type() == Error::kNotFound) {
SLOG(WiFi, 2) << "WiFi " << link_name() << " disconnected from "
<< " (or failed to connect to) service "
<< affected_service->unique_name() << ", "
<< "but could not find supplicant network to disable.";
} else {
LOG(FATAL) << "DisableNetwork failed.";
}
}
SLOG(WiFi, 2) << "WiFi " << link_name() << " disconnected from "
<< " (or failed to connect to) service "
<< affected_service->unique_name();
Service::ConnectFailure failure;
if (SuspectCredentials(*affected_service, &failure)) {
// If we suspect bad credentials, set failure, to trigger an error
// mole in Chrome.
affected_service->SetFailure(failure);
LOG(ERROR) << "Connection failure is due to suspect credentials: returning "
<< Service::ConnectFailureToString(failure);
} else {
affected_service->SetFailureSilent(Service::kFailureUnknown);
}
affected_service->NotifyCurrentEndpoint(NULL);
metrics()->NotifyServiceDisconnect(affected_service);
if (affected_service == pending_service_.get()) {
// The attempt to connect to |pending_service_| failed. Clear
// |pending_service_|, to indicate we're no longer in the middle
// of a connect request.
SetPendingService(NULL);
} else if (pending_service_.get()) {
// We've attributed the disconnection to what was the
// |current_service_|, rather than the |pending_service_|.
//
// If we're wrong about that (i.e. supplicant reported this
// CurrentBSS change after attempting to connect to
// |pending_service_|), we're depending on supplicant to retry
// connecting to |pending_service_|, and delivering another
// CurrentBSS change signal in the future.
//
// Log this fact, to help us debug (in case our assumptions are
// wrong).
SLOG(WiFi, 2) << "WiFi " << link_name() << " pending connection to service "
<< pending_service_->unique_name()
<< " after disconnect";
}
// If we disconnect, initially scan at a faster frequency, to make sure
// we've found all available APs.
RestartFastScanAttempts();
}
// We use the term "Roam" loosely. In particular, we include the case
// where we "Roam" to a BSS from the disconnected state.
void WiFi::HandleRoam(const ::DBus::Path &new_bss) {
EndpointMap::iterator endpoint_it = endpoint_by_rpcid_.find(new_bss);
if (endpoint_it == endpoint_by_rpcid_.end()) {
LOG(WARNING) << "WiFi " << link_name() << " connected to unknown BSS "
<< new_bss;
return;
}
const WiFiEndpointConstRefPtr endpoint(endpoint_it->second);
WiFiServiceRefPtr service = provider_->FindServiceForEndpoint(endpoint);
if (!service.get()) {
LOG(WARNING) << "WiFi " << link_name()
<< " could not find Service for Endpoint "
<< endpoint->bssid_string()
<< " (service will be unchanged)";
return;
}
SLOG(WiFi, 2) << "WiFi " << link_name()
<< " roamed to Endpoint " << endpoint->bssid_string()
<< " " << LogSSID(endpoint->ssid_string());
service->NotifyCurrentEndpoint(endpoint);
if (pending_service_.get() &&
service.get() != pending_service_.get()) {
// The Service we've roamed on to is not the one we asked for.
// We assume that this is transient, and that wpa_supplicant
// is trying / will try to connect to |pending_service_|.
//
// If it succeeds, we'll end up back here, but with |service|
// pointing at the same service as |pending_service_|.
//
// If it fails, we'll process things in HandleDisconnect.
//
// So we leave |pending_service_| untouched.
SLOG(WiFi, 2) << "WiFi " << link_name()
<< " new current Endpoint "
<< endpoint->bssid_string()
<< " is not part of pending service "
<< pending_service_->unique_name();
// Sanity check: if we didn't roam onto |pending_service_|, we
// should still be on |current_service_|.
if (service.get() != current_service_.get()) {
LOG(WARNING) << "WiFi " << link_name()
<< " new current Endpoint "
<< endpoint->bssid_string()
<< " is neither part of pending service "
<< pending_service_->unique_name()
<< " nor part of current service "
<< (current_service_ ?
current_service_->unique_name() :
"(NULL)");
// Although we didn't expect to get here, we should keep
// |current_service_| in sync with what supplicant has done.
current_service_ = service;
}
return;
}
if (pending_service_.get()) {
// We assume service.get() == pending_service_.get() here, because
// of the return in the previous if clause.
//
// Boring case: we've connected to the service we asked
// for. Simply update |current_service_| and |pending_service_|.
current_service_ = service;
SetPendingService(NULL);
return;
}
// |pending_service_| was NULL, so we weren't attempting to connect
// to a new Service. Sanity check that we're still on
// |current_service_|.
if (service.get() != current_service_.get()) {
LOG(WARNING)
<< "WiFi " << link_name()
<< " new current Endpoint "
<< endpoint->bssid_string()
<< (current_service_.get() ?
StringPrintf(" is not part of current service %s",
current_service_->unique_name().c_str()) :
" with no current service");
// We didn't expect to be here, but let's cope as well as we
// can. Update |current_service_| to keep it in sync with
// supplicant.
current_service_ = service;
// If this service isn't already marked as actively connecting (likely,
// since this service is a bit of a surprise) set the service as
// associating.
if (!current_service_->IsConnecting()) {
current_service_->SetState(Service::kStateAssociating);
}
return;
}
// At this point, we know that |pending_service_| was NULL, and that
// we're still on |current_service_|. This is the most boring case
// of all, because there's no state to update here.
return;
}
string WiFi::FindNetworkRpcidForService(
const WiFiService *service, Error *error) {
ReverseServiceMap::const_iterator rpcid_it =
rpcid_by_service_.find(service);
if (rpcid_it == rpcid_by_service_.end()) {
const string error_message =
StringPrintf(
"WiFi %s cannot find supplicant network rpcid for service %s",
link_name().c_str(), service->unique_name().c_str());
// There are contexts where this is not an error, such as when a service
// is clearing whatever cached credentials may not exist.
SLOG(WiFi, 2) << error_message;
if (error) {
error->Populate(Error::kNotFound, error_message);
}
return "";
}
return rpcid_it->second;
}
bool WiFi::DisableNetworkForService(const WiFiService *service, Error *error) {
string rpcid = FindNetworkRpcidForService(service, error);
if (rpcid.empty()) {
// Error is already populated.
return false;
}
if (!DisableNetwork(rpcid)) {
const string error_message =
StringPrintf("WiFi %s cannot disable network for service %s: "
"DBus operation failed for rpcid %s.",
link_name().c_str(), service->unique_name().c_str(),
rpcid.c_str());
Error::PopulateAndLog(error, Error::kOperationFailed, error_message);
// Make sure that such errored networks are removed, so problems do not
// propogate to future connection attempts.
RemoveNetwork(rpcid);
rpcid_by_service_.erase(service);
return false;
}
return true;
}
bool WiFi::RemoveNetworkForService(const WiFiService *service, Error *error) {
string rpcid = FindNetworkRpcidForService(service, error);
if (rpcid.empty()) {
// Error is already populated.
return false;
}
// Erase the rpcid from our tables regardless of failure below, since even
// if in failure, we never want to use this network again.
rpcid_by_service_.erase(service);
// TODO(quiche): Reconsider giving up immediately. Maybe give
// wpa_supplicant some time to retry, first.
if (!RemoveNetwork(rpcid)) {
const string error_message =
StringPrintf("WiFi %s cannot remove network for service %s: "
"DBus operation failed for rpcid %s.",
link_name().c_str(), service->unique_name().c_str(),
rpcid.c_str());
Error::PopulateAndLog(error, Error::kOperationFailed, error_message);
return false;
}
return true;
}
void WiFi::BSSAddedTask(
const ::DBus::Path &path,
const map<string, ::DBus::Variant> &properties) {
// Note: we assume that BSSIDs are unique across endpoints. This
// means that if an AP reuses the same BSSID for multiple SSIDs, we
// lose.
WiFiEndpointRefPtr endpoint(
new WiFiEndpoint(proxy_factory_, this, path, properties));
SLOG(WiFi, 1) << "Found endpoint. "
<< "RPC path: " << path << ", "
<< LogSSID(endpoint->ssid_string()) << ", "
<< "bssid: " << endpoint->bssid_string() << ", "
<< "signal: " << endpoint->signal_strength() << ", "
<< "security: " << endpoint->security_mode() << ", "
<< "frequency: " << endpoint->frequency();
if (endpoint->ssid_string().empty()) {
// Don't bother trying to find or create a Service for an Endpoint
// without an SSID. We wouldn't be able to connect to it anyway.
return;
}
if (endpoint->ssid()[0] == 0) {
// Assume that an SSID starting with NULL is bogus/misconfigured,
// and filter it out.
return;
}
provider_->OnEndpointAdded(endpoint);
// Do this last, to maintain the invariant that any Endpoint we
// know about has a corresponding Service.
//
// TODO(quiche): Write test to verify correct behavior in the case
// where we get multiple BSSAdded events for a single endpoint.
// (Old Endpoint's refcount should fall to zero, and old Endpoint
// should be destroyed.)
endpoint_by_rpcid_[path] = endpoint;
endpoint->Start();
}
void WiFi::BSSRemovedTask(const ::DBus::Path &path) {
EndpointMap::iterator i = endpoint_by_rpcid_.find(path);
if (i == endpoint_by_rpcid_.end()) {
LOG(WARNING) << "WiFi " << link_name()
<< " could not find BSS " << path
<< " to remove.";
return;
}
WiFiEndpointRefPtr endpoint = i->second;
CHECK(endpoint);
endpoint_by_rpcid_.erase(i);
WiFiServiceRefPtr service = provider_->OnEndpointRemoved(endpoint);
if (!service) {
return;
}
Error unused_error;
RemoveNetworkForService(service, &unused_error);
bool disconnect_service = !service->HasEndpoints() &&
(service->IsConnecting() || service->IsConnected());
if (disconnect_service) {
DisconnectFrom(service);
}
}
void WiFi::CertificationTask(
const map<string, ::DBus::Variant> &properties) {
if (!current_service_) {
LOG(ERROR) << "WiFi " << link_name() << " " << __func__
<< " with no current service.";
return;
}
map<string, ::DBus::Variant>::const_iterator properties_it =
properties.find(wpa_supplicant::kInterfacePropertyDepth);
if (properties_it == properties.end()) {
LOG(ERROR) << __func__ << " no depth parameter.";
return;
}
uint32 depth = properties_it->second.reader().get_uint32();
properties_it = properties.find(wpa_supplicant::kInterfacePropertySubject);
if (properties_it == properties.end()) {
LOG(ERROR) << __func__ << " no subject parameter.";
return;
}
string subject(properties_it->second.reader().get_string());
current_service_->AddEAPCertification(subject, depth);
}
void WiFi::EAPEventTask(const string &status, const string &parameter) {
Service::ConnectFailure failure = Service::kFailureUnknown;
if (!current_service_) {
LOG(ERROR) << "WiFi " << link_name() << " " << __func__
<< " with no current service.";
return;
}
if (status == wpa_supplicant::kEAPStatusAcceptProposedMethod) {
LOG(INFO) << link_name() << ": accepted EAP method " << parameter;
} else if (status == wpa_supplicant::kEAPStatusCompletion) {
if (parameter == wpa_supplicant::kEAPParameterSuccess) {
SLOG(WiFi, 2) << link_name() << ": EAP: "
<< "Completed authentication.";
is_eap_in_progress_ = false;
} else if (parameter == wpa_supplicant::kEAPParameterFailure) {
// If there was a TLS error, use this instead of the generic failure.
if (supplicant_tls_error_ == wpa_supplicant::kEAPStatusLocalTLSAlert) {
failure = Service::kFailureEAPLocalTLS;
} else if (supplicant_tls_error_ ==
wpa_supplicant::kEAPStatusRemoteTLSAlert) {
failure = Service::kFailureEAPRemoteTLS;
} else {
failure = Service::kFailureEAPAuthentication;
}
} else {
LOG(ERROR) << link_name() << ": EAP: "
<< "Unexpected " << status << " parameter: " << parameter;
}
} else if (status == wpa_supplicant::kEAPStatusLocalTLSAlert ||
status == wpa_supplicant::kEAPStatusRemoteTLSAlert) {
supplicant_tls_error_ = status;
} else if (status ==
wpa_supplicant::kEAPStatusRemoteCertificateVerification) {
if (parameter == wpa_supplicant::kEAPParameterSuccess) {
SLOG(WiFi, 2) << link_name() << ": EAP: "
<< "Completed remote certificate verification.";
} else {
// wpa_supplicant doesn't currently have a verification failure
// message. We will instead get a RemoteTLSAlert above.
LOG(ERROR) << link_name() << ": EAP: "
<< "Unexpected " << status << " parameter: " << parameter;
}
} else if (status == wpa_supplicant::kEAPStatusParameterNeeded) {
LOG(ERROR) << link_name() << ": EAP: "
<< "Authentication due to missing authentication parameter: "
<< parameter;
failure = Service::kFailureEAPAuthentication;
} else if (status == wpa_supplicant::kEAPStatusStarted) {
SLOG(WiFi, 2) << link_name() << ": EAP authentication starting.";
is_eap_in_progress_ = true;
}
if (failure != Service::kFailureUnknown) {
// Avoid a reporting failure twice by clearing eap_in_progress_ early.
is_eap_in_progress_ = false;
current_service_->DisconnectWithFailure(failure, NULL);
}
}
void WiFi::PropertiesChangedTask(
const map<string, ::DBus::Variant> &properties) {
// TODO(quiche): Handle changes in other properties (e.g. signal
// strength).
// Note that order matters here. In particular, we want to process
// changes in the current BSS before changes in state. This is so
// that we update the state of the correct Endpoint/Service.
map<string, ::DBus::Variant>::const_iterator properties_it =
properties.find(wpa_supplicant::kInterfacePropertyCurrentBSS);
if (properties_it != properties.end()) {
CurrentBSSChanged(properties_it->second.reader().get_path());
}
properties_it = properties.find(wpa_supplicant::kInterfacePropertyState);
if (properties_it != properties.end()) {
StateChanged(properties_it->second.reader().get_string());
}
}
void WiFi::ScanDoneTask() {
SLOG(WiFi, 2) << __func__ << " need_bss_flush_ " << need_bss_flush_;
if (need_bss_flush_) {
CHECK(supplicant_interface_proxy_ != NULL);
// Compute |max_age| relative to |resumed_at_|, to account for the
// time taken to scan.
struct timeval now;
uint32_t max_age;
time_->GetTimeMonotonic(&now);
max_age = kMaxBSSResumeAgeSeconds + (now.tv_sec - resumed_at_.tv_sec);
supplicant_interface_proxy_->FlushBSS(max_age);
need_bss_flush_ = false;
}
SetScanPending(false);
StartScanTimer();
}
void WiFi::ScanTask() {
SLOG(WiFi, 2) << "WiFi " << link_name() << " scan requested.";
if (!enabled()) {
SLOG(WiFi, 2) << "Ignoring scan request while device is not enabled.";
return;
}
if (!supplicant_present_ || !supplicant_interface_proxy_.get()) {
SLOG(WiFi, 2) << "Ignoring scan request while supplicant is not present.";
return;
}
if ((pending_service_.get() && pending_service_->IsConnecting()) ||
(current_service_.get() && current_service_->IsConnecting())) {
SLOG(WiFi, 2) << "Ignoring scan request while connecting to an AP.";
return;
}
map<string, DBus::Variant> scan_args;
scan_args[wpa_supplicant::kPropertyScanType].writer().
append_string(wpa_supplicant::kScanTypeActive);
ByteArrays hidden_ssids = provider_->GetHiddenSSIDList();
if (!hidden_ssids.empty()) {
// TODO(pstew): Devise a better method for time-sharing with SSIDs that do
// not fit in.
if (hidden_ssids.size() >= wpa_supplicant::kScanMaxSSIDsPerScan) {
hidden_ssids.erase(
hidden_ssids.begin() + wpa_supplicant::kScanMaxSSIDsPerScan - 1,
hidden_ssids.end());
}
// Add Broadcast SSID, signified by an empty ByteArray. If we specify
// SSIDs to wpa_supplicant, we need to explicitly specify the default
// behavior of doing a broadcast probe.
hidden_ssids.push_back(ByteArray());
scan_args[wpa_supplicant::kPropertyScanSSIDs] =
DBusAdaptor::ByteArraysToVariant(hidden_ssids);
}
try {
supplicant_interface_proxy_->Scan(scan_args);
SetScanPending(true);
} catch (const DBus::Error &e) { // NOLINT
// A scan may fail if, for example, the wpa_supplicant vanishing
// notification is posted after this task has already started running.
LOG(WARNING) << "Scan failed: " << e.what();
}
}
void WiFi::SetScanPending(bool pending) {
if (scan_pending_ != pending) {
scan_pending_ = pending;
adaptor()->EmitBoolChanged(flimflam::kScanningProperty, pending);
}
}
void WiFi::StateChanged(const string &new_state) {
const string old_state = supplicant_state_;
supplicant_state_ = new_state;
LOG(INFO) << "WiFi " << link_name() << " " << __func__ << " "
<< old_state << " -> " << new_state;
WiFiService *affected_service;
// Identify the service to which the state change applies. If
// |pending_service_| is non-NULL, then the state change applies to
// |pending_service_|. Otherwise, it applies to |current_service_|.
//
// This policy is driven by the fact that the |pending_service_|
// doesn't become the |current_service_| until wpa_supplicant
// reports a CurrentBSS change to the |pending_service_|. And the
// CurrentBSS change won't be reported until the |pending_service_|
// reaches the wpa_supplicant::kInterfaceStateCompleted state.
affected_service =
pending_service_.get() ? pending_service_.get() : current_service_.get();
if (!affected_service) {
SLOG(WiFi, 2) << "WiFi " << link_name() << " " << __func__
<< " with no service";
return;
}
if (new_state == wpa_supplicant::kInterfaceStateCompleted) {
if (affected_service->IsConnected()) {
StopReconnectTimer();
EnableHighBitrates();
} else if (has_already_completed_) {
LOG(INFO) << link_name() << " L3 configuration already started.";
} else if (AcquireIPConfigWithLeaseName(
affected_service->GetStorageIdentifier())) {
LOG(INFO) << link_name() << " is up; started L3 configuration.";
affected_service->SetState(Service::kStateConfiguring);
} else {
LOG(ERROR) << "Unable to acquire DHCP config.";
}
has_already_completed_ = true;
} else if (new_state == wpa_supplicant::kInterfaceStateAssociated) {
affected_service->SetState(Service::kStateAssociating);
} else if (new_state == wpa_supplicant::kInterfaceStateAuthenticating ||
new_state == wpa_supplicant::kInterfaceStateAssociating ||
new_state == wpa_supplicant::kInterfaceState4WayHandshake ||
new_state == wpa_supplicant::kInterfaceStateGroupHandshake) {
// Ignore transitions into these states from Completed, to avoid
// bothering the user when roaming, or re-keying.
if (old_state != wpa_supplicant::kInterfaceStateCompleted)
affected_service->SetState(Service::kStateAssociating);
// TOOD(quiche): On backwards transitions, we should probably set
// a timeout for getting back into the completed state. At present,
// we depend on wpa_supplicant eventually reporting that CurrentBSS
// has changed. But there may be cases where that signal is not sent.
// (crosbug.com/23207)
} else if (new_state == wpa_supplicant::kInterfaceStateDisconnected &&
affected_service == current_service_ &&
affected_service->IsConnected()) {
// This means that wpa_supplicant failed in a re-connect attempt, but
// may still be reconnecting. Give wpa_supplicant a limited amount of
// time to transition out this condition by either connecting or changing
// CurrentBSS.
StartReconnectTimer();
} else {
// Other transitions do not affect Service state.
//
// Note in particular that we ignore a State change into
// kInterfaceStateDisconnected, in favor of observing the corresponding
// change in CurrentBSS.
}
}
bool WiFi::SuspectCredentials(
const WiFiService &service, Service::ConnectFailure *failure) const {
if (service.IsSecurityMatch(flimflam::kSecurityPsk)) {
if (supplicant_state_ == wpa_supplicant::kInterfaceState4WayHandshake &&
!service.has_ever_connected()) {
if (failure) {
*failure = Service::kFailureBadPassphrase;
}
return true;
}
} else if (service.IsSecurityMatch(flimflam::kSecurity8021x)) {
if (is_eap_in_progress_ && !service.has_ever_connected()) {
if (failure) {
*failure = Service::kFailureEAPAuthentication;
}
return true;
}
}
return false;
}
// static
bool WiFi::SanitizeSSID(string *ssid) {
CHECK(ssid);
size_t ssid_len = ssid->length();
size_t i;
bool changed = false;
for (i = 0; i < ssid_len; ++i) {
if (!g_ascii_isprint((*ssid)[i])) {
(*ssid)[i] = '?';
changed = true;
}
}
return changed;
}
// static
string WiFi::LogSSID(const string &ssid) {
string out;
for (string::const_iterator it = ssid.begin(); it != ssid.end(); ++it) {
// Replace '[' and ']' (in addition to non-printable characters) so that
// it's easy to match the right substring through a non-greedy regex.
if (*it == '[' || *it == ']' || !g_ascii_isprint(*it)) {
base::StringAppendF(&out, "\\x%02x", *it);
} else {
out += *it;
}
}
return StringPrintf("[SSID=%s]", out.c_str());
}
void WiFi::OnLinkMonitorFailure() {
// If we have never found the gateway, let's be conservative and not
// do anything, in case this network topology does not have a gateway.
if (!link_monitor()->IsGatewayFound()) {
LOG(INFO) << "In " << __func__ << "(): "
<< "Skipping reassociate since gateway was never found.";
return;
}
if (!supplicant_present_) {
LOG(ERROR) << "In " << __func__ << "(): "
<< "wpa_supplicant is not present. Cannot reassociate.";
return;
}
try {
// This will force a transition out of connected, if we are actually
// connected.
supplicant_interface_proxy_->Reassociate();
// If we don't eventually get a transition back into a connected state,
// there is something wrong.
StartReconnectTimer();
LOG(INFO) << "In " << __func__ << "(): Called Reassociate().";
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "In " << __func__ << "(): failed to call Reassociate().";
return;
}
}
bool WiFi::ShouldUseArpGateway() const {
return true;
}
void WiFi::DisassociateFromService(const WiFiServiceRefPtr &service) {
DisconnectFrom(service);
if (service == selected_service()) {
DropConnection();
}
Error unused_error;
RemoveNetworkForService(service, &unused_error);
}
vector<GeolocationInfo> WiFi::GetGeolocationObjects() const {
vector<GeolocationInfo> objects;
for (EndpointMap::const_iterator it = endpoint_by_rpcid_.begin();
it != endpoint_by_rpcid_.end();
++it) {
GeolocationInfo geoinfo;
WiFiEndpointRefPtr endpoint = it->second;
geoinfo.AddField(kGeoMacAddressProperty, endpoint->bssid_string());
geoinfo.AddField(kGeoSignalStrengthProperty,
StringPrintf("%d", endpoint->signal_strength()));
geoinfo.AddField(
kGeoChannelProperty,
StringPrintf("%d",
Metrics::WiFiFrequencyToChannel(endpoint->frequency())));
// TODO(gauravsh): Include age field. crosbug.com/35445
objects.push_back(geoinfo);
}
return objects;
}
void WiFi::HelpRegisterDerivedInt32(
PropertyStore *store,
const string &name,
int32(WiFi::*get)(Error *error),
void(WiFi::*set)(const int32 &value, Error *error)) {
store->RegisterDerivedInt32(
name,
Int32Accessor(new CustomAccessor<WiFi, int32>(this, get, set)));
}
void WiFi::HelpRegisterDerivedUint16(
PropertyStore *store,
const string &name,
uint16(WiFi::*get)(Error *error),
void(WiFi::*set)(const uint16 &value, Error *error)) {
store->RegisterDerivedUint16(
name,
Uint16Accessor(new CustomAccessor<WiFi, uint16>(this, get, set)));
}
void WiFi::OnAfterResume() {
LOG(INFO) << __func__;
Device::OnAfterResume(); // May refresh ipconfig_
// We want to flush the BSS cache, but we don't want to conflict
// with a running scan or an active connection attempt. So record
// the need to flush, and take care of flushing when the next scan
// completes.
//
// Note that supplicant will automatically expire old cache
// entries (after, e.g., a BSS is not found in two consecutive
// scans). However, our explicit flush accelerates re-association
// in cases where a BSS disappeared while we were asleep. (See,
// e.g. WiFiRoaming.005SuspendRoam.)
time_->GetTimeMonotonic(&resumed_at_);
need_bss_flush_ = true;
if (!scan_pending_ && IsIdle()) {
// Not scanning/connecting/connected, so let's get things rolling.
Scan(NULL);
} else {
SLOG(WiFi, 1) << __func__
<< " skipping scan, already scanning or connected.";
}
}
void WiFi::OnConnected() {
Device::OnConnected();
EnableHighBitrates();
}
void WiFi::RestartFastScanAttempts() {
fast_scans_remaining_ = kNumFastScanAttempts;
StartScanTimer();
}
void WiFi::StartScanTimer() {
if (scan_interval_seconds_ == 0) {
StopScanTimer();
return;
}
scan_timer_callback_.Reset(
Bind(&WiFi::ScanTimerHandler, weak_ptr_factory_.GetWeakPtr()));
// Repeat the first few scans after disconnect relatively quickly so we
// have reasonable trust that no APs we are looking for are present.
dispatcher()->PostDelayedTask(scan_timer_callback_.callback(),
fast_scans_remaining_ > 0 ?
kFastScanIntervalSeconds * 1000 : scan_interval_seconds_ * 1000);
}
void WiFi::StopScanTimer() {
scan_timer_callback_.Cancel();
}
void WiFi::ScanTimerHandler() {
SLOG(WiFi, 2) << "WiFi Device " << link_name() << ": " << __func__;
if (IsIdle() && !scan_pending_) {
Scan(NULL);
if (fast_scans_remaining_ > 0) {
--fast_scans_remaining_;
}
}
StartScanTimer();
}
void WiFi::StartPendingTimer() {
pending_timeout_callback_.Reset(
Bind(&WiFi::PendingTimeoutHandler, weak_ptr_factory_.GetWeakPtr()));
dispatcher()->PostDelayedTask(pending_timeout_callback_.callback(),
kPendingTimeoutSeconds * 1000);
}
void WiFi::StopPendingTimer() {
pending_timeout_callback_.Cancel();
}
void WiFi::SetPendingService(const WiFiServiceRefPtr &service) {
SLOG(WiFi, 2) << "WiFi " << link_name() << " setting pending service to "
<< (service ? service->unique_name(): "NULL");
if (service) {
service->SetState(Service::kStateAssociating);
StartPendingTimer();
} else if (pending_service_) {
StopPendingTimer();
}
pending_service_ = service;
}
void WiFi::PendingTimeoutHandler() {
LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__;
CHECK(pending_service_);
pending_service_->DisconnectWithFailure(Service::kFailureOutOfRange, NULL);
}
void WiFi::StartReconnectTimer() {
if (!reconnect_timeout_callback_.IsCancelled()) {
LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__
<< ": reconnect timer already running.";
return;
}
LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__;
reconnect_timeout_callback_.Reset(
Bind(&WiFi::ReconnectTimeoutHandler, weak_ptr_factory_.GetWeakPtr()));
dispatcher()->PostDelayedTask(reconnect_timeout_callback_.callback(),
kReconnectTimeoutSeconds * 1000);
}
void WiFi::StopReconnectTimer() {
SLOG(WiFi, 2) << "WiFi Device " << link_name() << ": " << __func__;
reconnect_timeout_callback_.Cancel();
}
void WiFi::ReconnectTimeoutHandler() {
LOG(INFO) << "WiFi Device " << link_name() << ": " << __func__;
reconnect_timeout_callback_.Cancel();
CHECK(current_service_);
current_service_->SetFailureSilent(Service::kFailureConnect);
DisconnectFrom(current_service_);
}
void WiFi::OnSupplicantAppear(const string &/*owner*/) {
LOG(INFO) << "WPA supplicant appeared.";
if (supplicant_present_) {
// Restart the WiFi device if it's started already. This will reset the
// state and connect the device to the new WPA supplicant instance.
if (enabled()) {
Restart();
}
return;
}
supplicant_present_ = true;
ConnectToSupplicant();
}
void WiFi::OnSupplicantVanish() {
LOG(INFO) << "WPA supplicant vanished.";
if (!supplicant_present_) {
return;
}
supplicant_present_ = false;
// Restart the WiFi device if it's started already. This will effectively
// suspend the device until the WPA supplicant reappears.
if (enabled()) {
Restart();
}
}
void WiFi::OnWiFiDebugScopeChanged(bool enabled) {
SLOG(WiFi, 2) << "WiFi debug scope changed; enable is now " << enabled;
if (!supplicant_process_proxy_.get()) {
SLOG(WiFi, 2) << "Suplicant process proxy not present.";
return;
}
string current_level;
try {
current_level = supplicant_process_proxy_->GetDebugLevel();
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << __func__ << ": Failed to get wpa_supplicant debug level.";
return;
}
if (current_level != wpa_supplicant::kDebugLevelInfo &&
current_level != wpa_supplicant::kDebugLevelDebug) {
SLOG(WiFi, 2) << "WiFi debug level is currently "
<< current_level
<< "; assuming that it is being controlled elsewhere.";
return;
}
string new_level = enabled ? wpa_supplicant::kDebugLevelDebug :
wpa_supplicant::kDebugLevelInfo;
if (new_level == current_level) {
SLOG(WiFi, 2) << "WiFi debug level is already the desired level "
<< current_level;
return;
}
try {
supplicant_process_proxy_->SetDebugLevel(new_level);
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << __func__ << ": Failed to set wpa_supplicant debug level.";
}
}
void WiFi::SetConnectionDebugging(bool enabled) {
if (is_debugging_connection_ == enabled) {
return;
}
OnWiFiDebugScopeChanged(
enabled ||
ScopeLogger::GetInstance()->IsScopeEnabled(ScopeLogger::kWiFi));
is_debugging_connection_ = enabled;
}
void WiFi::ConnectToSupplicant() {
LOG(INFO) << link_name() << ": " << (enabled() ? "enabled" : "disabled")
<< " supplicant: "
<< (supplicant_present_ ? "present" : "absent")
<< " proxy: "
<< (supplicant_process_proxy_.get() ? "non-null" : "null");
if (!enabled() || !supplicant_present_ || supplicant_process_proxy_.get()) {
return;
}
supplicant_process_proxy_.reset(
proxy_factory_->CreateSupplicantProcessProxy(
wpa_supplicant::kDBusPath, wpa_supplicant::kDBusAddr));
OnWiFiDebugScopeChanged(
ScopeLogger::GetInstance()->IsScopeEnabled(ScopeLogger::kWiFi));
::DBus::Path interface_path;
try {
map<string, DBus::Variant> create_interface_args;
create_interface_args[wpa_supplicant::kInterfacePropertyName].writer().
append_string(link_name().c_str());
create_interface_args[wpa_supplicant::kInterfacePropertyDriver].writer().
append_string(wpa_supplicant::kDriverNL80211);
create_interface_args[
wpa_supplicant::kInterfacePropertyConfigFile].writer().
append_string(kSupplicantConfPath);
interface_path =
supplicant_process_proxy_->CreateInterface(create_interface_args);
} catch (const DBus::Error &e) { // NOLINT
if (!strcmp(e.name(), wpa_supplicant::kErrorInterfaceExists)) {
interface_path =
supplicant_process_proxy_->GetInterface(link_name());
// TODO(quiche): Is it okay to crash here, if device is missing?
} else {
LOG(ERROR) << __func__ << ": Failed to create interface with supplicant.";
return;
}
}
supplicant_interface_proxy_.reset(
proxy_factory_->CreateSupplicantInterfaceProxy(
this, interface_path, wpa_supplicant::kDBusAddr));
RTNLHandler::GetInstance()->SetInterfaceFlags(interface_index(), IFF_UP,
IFF_UP);
// TODO(quiche) Set ApScan=1 and BSSExpireAge=190, like flimflam does?
// Clear out any networks that might previously have been configured
// for this interface.
supplicant_interface_proxy_->RemoveAllNetworks();
// Flush interface's BSS cache, so that we get BSSAdded signals for
// all BSSes (not just new ones since the last scan).
supplicant_interface_proxy_->FlushBSS(0);
try {
// TODO(pstew): Disable fast_reauth until supplicant can properly deal
// with RADIUS servers that respond strangely to such requests.
// crosbug.com/25630
supplicant_interface_proxy_->SetFastReauth(false);
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "Failed to disable fast_reauth. "
<< "May be running an older version of wpa_supplicant.";
}
try {
// Helps with passing WiFiRomaing.001SSIDSwitchBack.
supplicant_interface_proxy_->SetScanInterval(kRescanIntervalSeconds);
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "Failed to set scan_interval. "
<< "May be running an older version of wpa_supplicant.";
}
try {
supplicant_interface_proxy_->SetDisableHighBitrates(true);
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "Failed to disable high bitrates. "
<< "May be running an older version of wpa_supplicant.";
}
Scan(NULL);
StartScanTimer();
}
void WiFi::EnableHighBitrates() {
LOG(INFO) << "Enabling high bitrates.";
try {
supplicant_interface_proxy_->EnableHighBitrates();
} catch (const DBus::Error &e) { // NOLINT
LOG(ERROR) << "exception while enabling high rates: " << e.what();
}
}
void WiFi::Restart() {
LOG(INFO) << link_name() << " restarting.";
WiFiRefPtr me = this; // Make sure we don't get destructed.
// Go through the manager rather than starting and stopping the device
// directly so that the device can be configured with the profile.
manager()->DeregisterDevice(me);
manager()->RegisterDevice(me);
}
} // namespace shill