| # Copyright 2018 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| # for use with servo INA adapter board. If measuring via servo V1 this can just |
| # be ignored. clobber_ok added if user wishes to include servo_loc.xml |
| # additionally. |
| inline = """ |
| <map> |
| <name>adc_mux</name> |
| <doc>valid mux values for DUT's two banks of INA219 off PCA9540 |
| ADCs</doc> |
| <params clobber_ok="" none="0" bank0="4" bank1="5"></params> |
| </map> |
| <control> |
| <name>adc_mux</name> |
| <doc>4 to 1 mux to steer remote i2c i2c_mux:rem to two sets of |
| 16 INA219 ADCs. Note they are only on leg0 and leg1</doc> |
| <params clobber_ok="" interface="2" drv="pca9546" slv="0x70" |
| map="adc_mux"></params> |
| </control> |
| """ |
| |
| inas = [ |
| ('ina219', 0x40, 'ppvar_vcc', 1.0, 0.002, 'loc0', True), # L13 |
| ('ina219', 0x41, 'ppvat_gt', 1.0, 0.002, 'loc0', True), # L31 |
| ('ina219', 0x42, 'ppvar_sa', 1.0, 0.005, 'loc0', True), # L12 |
| ('ina219', 0x43, 'pp975_io', 7.7, 0.100, 'loc0', True), # R111 |
| ('ina219', 0x44, 'pp5000_a', 5.0, 0.010, 'loc0', True), # L24 |
| ('ina219', 0x45, 'pp3300_dsw', 3.3, 0.010, 'loc0', True), # R513 |
| ('ina219', 0x46, 'pp3300_a', 7.7, 0.010, 'loc0', True), # R144 |
| ('ina219', 0x47, 'pp1800_u_dram', 7.7, 0.100, 'loc0', True), # R161 |
| ('ina219', 0x48, 'pp1200_vddq', 7.7, 0.100, 'loc0', True), # R162 |
| ('ina219', 0x49, 'pp1000_a', 7.7, 0.100, 'loc0', True), # R163 |
| ('ina219', 0x4a, 'pp850_prim_core', 7.7, 0.100, 'loc0', True), # R164 |
| ('ina219', 0x4b, 'pp3300_dx_wlan', 3.3, 0.010, 'loc0', True), # R645 |
| ('ina219', 0x4c, 'ppvar_bl_pwr', 7.7, 0.050, 'loc0', True), # F1 |
| ('ina219', 0x4d, 'pp3300_dx_edp', 3.3, 0.010, 'loc0', True), # R644 |
| ('ina219', 0x4e, 'pp3300_h1', 3.3, 0.100, 'loc0', True), # R390 |
| ('ina219', 0x4f, 'vbat', 7.7, 0.020, 'loc0', True), # R226 |
| ] |
