Include/refcount.h

#ifndef _Py_REFCOUNT_H
#define _Py_REFCOUNT_H
#ifdef __cplusplus
extern "C" {
#endif


#if !defined(_Py_OPAQUE_PYOBJECT)
/*
Immortalization:

The following indicates the immortalization strategy depending on the amount
of available bits in the reference count field. All strategies are backwards
compatible but the specific reference count value or immortalization check
might change depending on the specializations for the underlying system.

Proper deallocation of immortal instances requires distinguishing between
statically allocated immortal instances vs those promoted by the runtime to be
immortal. The latter should be the only instances that require
cleanup during runtime finalization.
*/

#if SIZEOF_VOID_P > 4
/*
In 64+ bit systems, any object whose 32 bit reference count is >= 2**31
will be treated as immortal.

Using the lower 32 bits makes the value backwards compatible by allowing
C-Extensions without the updated checks in Py_INCREF and Py_DECREF to safely
increase and decrease the objects reference count.

In order to offer sufficient resilience to C extensions using the stable ABI
compiled against 3.11 or earlier, we set the initial value near the
middle of the range (2**31, 2**32). That way the refcount can be
off by ~1 billion without affecting immortality.

Reference count increases will use saturated arithmetic, taking advantage of
having all the lower 32 bits set, which will avoid the reference count to go
beyond the refcount limit. Immortality checks for reference count decreases will
be done by checking the bit sign flag in the lower 32 bits.

To ensure that once an object becomes immortal, it remains immortal, the threshold
for omitting increfs is much higher than for omitting decrefs. Consequently, once
the refcount for an object exceeds _Py_IMMORTAL_MINIMUM_REFCNT it will gradually
increase over time until it reaches _Py_IMMORTAL_INITIAL_REFCNT.
*/
#define _Py_IMMORTAL_INITIAL_REFCNT (3ULL << 30)
#define _Py_IMMORTAL_MINIMUM_REFCNT (1ULL << 31)
#define _Py_STATIC_FLAG_BITS ((Py_ssize_t)(_Py_STATICALLY_ALLOCATED_FLAG | _Py_IMMORTAL_FLAGS))
#define _Py_STATIC_IMMORTAL_INITIAL_REFCNT (((Py_ssize_t)_Py_IMMORTAL_INITIAL_REFCNT) | (_Py_STATIC_FLAG_BITS << 48))

#else
/*
In 32 bit systems, an object will be treated as immortal if its reference
count equals or exceeds _Py_IMMORTAL_MINIMUM_REFCNT (2**30).

Using the lower 30 bits makes the value backwards compatible by allowing
C-Extensions without the updated checks in Py_INCREF and Py_DECREF to safely
increase and decrease the objects reference count. The object would lose its
immortality, but the execution would still be correct.

Reference count increases and decreases will first go through an immortality
check by comparing the reference count field to the minimum immortality refcount.
*/
#define _Py_IMMORTAL_INITIAL_REFCNT ((Py_ssize_t)(5L << 28))
#define _Py_IMMORTAL_MINIMUM_REFCNT ((Py_ssize_t)(1L << 30))
#define _Py_STATIC_IMMORTAL_INITIAL_REFCNT ((Py_ssize_t)(7L << 28))
#define _Py_STATIC_IMMORTAL_MINIMUM_REFCNT ((Py_ssize_t)(6L << 28))
#endif

// Py_GIL_DISABLED builds indicate immortal objects using `ob_ref_local`, which is
// always 32-bits.
#ifdef Py_GIL_DISABLED
#define _Py_IMMORTAL_REFCNT_LOCAL UINT32_MAX
#endif


#ifdef Py_GIL_DISABLED
   // The shared reference count uses the two least-significant bits to store
   // flags. The remaining bits are used to store the reference count.
#  define _Py_REF_SHARED_SHIFT        2
#  define _Py_REF_SHARED_FLAG_MASK    0x3

   // The shared flags are initialized to zero.
#  define _Py_REF_SHARED_INIT         0x0
#  define _Py_REF_MAYBE_WEAKREF       0x1
#  define _Py_REF_QUEUED              0x2
#  define _Py_REF_MERGED              0x3

   // Create a shared field from a refcnt and desired flags
#  define _Py_REF_SHARED(refcnt, flags) \
              (((refcnt) << _Py_REF_SHARED_SHIFT) + (flags))
#endif  // Py_GIL_DISABLED
#endif  // _Py_OPAQUE_PYOBJECT

// Py_REFCNT() implementation for the stable ABI
PyAPI_FUNC(Py_ssize_t) Py_REFCNT(PyObject *ob);

#if defined(Py_LIMITED_API) && Py_LIMITED_API+0 >= 0x030e0000
    // Stable ABI implements Py_REFCNT() as a function call
    // on limited C API version 3.14 and newer, and on abi3t.
#elif defined(_Py_OPAQUE_PYOBJECT)
    // Py_REFCNT() is also a function call in abi3t.
#else
    static inline Py_ssize_t _Py_REFCNT(PyObject *ob) {
    #if !defined(Py_GIL_DISABLED)
        return ob->ob_refcnt;
    #else
        uint32_t local = _Py_atomic_load_uint32_relaxed(&ob->ob_ref_local);
        if (local == _Py_IMMORTAL_REFCNT_LOCAL) {
            return _Py_IMMORTAL_INITIAL_REFCNT;
        }
        Py_ssize_t shared = _Py_atomic_load_ssize_relaxed(&ob->ob_ref_shared);
        return _Py_STATIC_CAST(Py_ssize_t, local) +
               Py_ARITHMETIC_RIGHT_SHIFT(Py_ssize_t, shared, _Py_REF_SHARED_SHIFT);
    #endif
    }
    #if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
    #  define Py_REFCNT(ob) _Py_REFCNT(_PyObject_CAST(ob))
    #else
    #  define Py_REFCNT(ob) _Py_REFCNT(ob)
    #endif
#endif

#ifndef _Py_OPAQUE_PYOBJECT
static inline Py_ALWAYS_INLINE int _Py_IsImmortal(PyObject *op)
{
#if defined(Py_GIL_DISABLED)
    return (_Py_atomic_load_uint32_relaxed(&op->ob_ref_local) ==
            _Py_IMMORTAL_REFCNT_LOCAL);
#elif SIZEOF_VOID_P > 4
    return _Py_CAST(int32_t, op->ob_refcnt) < 0;
#else
    return op->ob_refcnt >= _Py_IMMORTAL_MINIMUM_REFCNT;
#endif
}
#define _Py_IsImmortal(op) _Py_IsImmortal(_PyObject_CAST(op))


static inline Py_ALWAYS_INLINE int _Py_IsStaticImmortal(PyObject *op)
{
#if defined(Py_GIL_DISABLED) || SIZEOF_VOID_P > 4
    return (op->ob_flags & _Py_STATICALLY_ALLOCATED_FLAG) != 0;
#else
    return op->ob_refcnt >= _Py_STATIC_IMMORTAL_MINIMUM_REFCNT;
#endif
}
#define _Py_IsStaticImmortal(op) _Py_IsStaticImmortal(_PyObject_CAST(op))
#endif // !defined(_Py_OPAQUE_PYOBJECT)

// Py_SET_REFCNT() implementation for stable ABI
PyAPI_FUNC(void) _Py_SetRefcnt(PyObject *ob, Py_ssize_t refcnt);

static inline void Py_SET_REFCNT(PyObject *ob, Py_ssize_t refcnt) {
    assert(refcnt >= 0);
#if (defined(Py_LIMITED_API) && Py_LIMITED_API+0 >= 0x030d0000) \
    || defined(_Py_OPAQUE_PYOBJECT)
    // Stable ABI implements Py_SET_REFCNT() as a function call
    // on limited C API version 3.13 and newer, and abi3t.
    _Py_SetRefcnt(ob, refcnt);
#else
    // This immortal check is for code that is unaware of immortal objects.
    // The runtime tracks these objects and we should avoid as much
    // as possible having extensions inadvertently change the refcnt
    // of an immortalized object.
    if (_Py_IsImmortal(ob)) {
        return;
    }
#ifndef Py_GIL_DISABLED
#if SIZEOF_VOID_P > 4
    ob->ob_refcnt = (uint32_t)refcnt;
#else
    ob->ob_refcnt = refcnt;
#endif
#else
    if (_Py_IsOwnedByCurrentThread(ob)) {
        if ((size_t)refcnt > (size_t)UINT32_MAX) {
            // On overflow, make the object immortal
            ob->ob_tid = _Py_UNOWNED_TID;
            ob->ob_ref_local = _Py_IMMORTAL_REFCNT_LOCAL;
            ob->ob_ref_shared = 0;
        }
        else {
            // Set local refcount to desired refcount and shared refcount
            // to zero, but preserve the shared refcount flags.
            ob->ob_ref_local = _Py_STATIC_CAST(uint32_t, refcnt);
            ob->ob_ref_shared &= _Py_REF_SHARED_FLAG_MASK;
        }
    }
    else {
        // Set local refcount to zero and shared refcount to desired refcount.
        // Mark the object as merged.
        ob->ob_tid = _Py_UNOWNED_TID;
        ob->ob_ref_local = 0;
        ob->ob_ref_shared = _Py_REF_SHARED(refcnt, _Py_REF_MERGED);
    }
#endif  // Py_GIL_DISABLED
#endif  // Py_LIMITED_API
}
#if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
#  define Py_SET_REFCNT(ob, refcnt) Py_SET_REFCNT(_PyObject_CAST(ob), (refcnt))
#endif


/*
The macros Py_INCREF(op) and Py_DECREF(op) are used to increment or decrement
reference counts.  Py_DECREF calls the object's deallocator function when
the refcount falls to 0; for
objects that don't contain references to other objects or heap memory
this can be the standard function free().  Both macros can be used
wherever a void expression is allowed.  The argument must not be a
NULL pointer.  If it may be NULL, use Py_XINCREF/Py_XDECREF instead.
The macro _Py_NewReference(op) initialize reference counts to 1, and
in special builds (Py_REF_DEBUG, Py_TRACE_REFS) performs additional
bookkeeping appropriate to the special build.

We assume that the reference count field can never overflow; this can
be proven when the size of the field is the same as the pointer size, so
we ignore the possibility.  Provided a C int is at least 32 bits (which
is implicitly assumed in many parts of this code), that's enough for
about 2**31 references to an object.

XXX The following became out of date in Python 2.2, but I'm not sure
XXX what the full truth is now.  Certainly, heap-allocated type objects
XXX can and should be deallocated.
Type objects should never be deallocated; the type pointer in an object
is not considered to be a reference to the type object, to save
complications in the deallocation function.  (This is actually a
decision that's up to the implementer of each new type so if you want,
you can count such references to the type object.)
*/

#if defined(Py_REF_DEBUG) && !defined(Py_LIMITED_API)
PyAPI_FUNC(void) _Py_NegativeRefcount(const char *filename, int lineno,
                                      PyObject *op);
PyAPI_FUNC(void) _Py_INCREF_IncRefTotal(void);
PyAPI_FUNC(void) _Py_DECREF_DecRefTotal(void);
#endif  // Py_REF_DEBUG && !Py_LIMITED_API

PyAPI_FUNC(void) _Py_Dealloc(PyObject *);


/*
These are provided as conveniences to Python runtime embedders, so that
they can have object code that is not dependent on Python compilation flags.
*/
PyAPI_FUNC(void) Py_IncRef(PyObject *);
PyAPI_FUNC(void) Py_DecRef(PyObject *);

// Similar to Py_IncRef() and Py_DecRef() but the argument must be non-NULL.
// Private functions used by Py_INCREF() and Py_DECREF().
PyAPI_FUNC(void) _Py_IncRef(PyObject *);
PyAPI_FUNC(void) _Py_DecRef(PyObject *);

static inline Py_ALWAYS_INLINE void Py_INCREF(PyObject *op)
{
#if (defined(Py_LIMITED_API) && (Py_LIMITED_API+0 >= 0x030c0000 || defined(Py_REF_DEBUG))) \
    || defined(_Py_OPAQUE_PYOBJECT)
    // Stable ABI implements Py_INCREF() as a function call on limited C API
    // version 3.12 and newer, abi3t, and on Python built in debug mode.
    // _Py_IncRef() was added to Python 3.10.0a7, use Py_IncRef() on older versions.
    // Py_IncRef() accepts NULL whereas _Py_IncRef() doesn't.
#  if Py_LIMITED_API+0 >= 0x030a00A7
    _Py_IncRef(op);
#  else
    Py_IncRef(op);
#  endif
#else
    // Non-limited C API and limited C API for Python 3.9 and older access
    // directly PyObject.ob_refcnt.
#if defined(Py_GIL_DISABLED)
    uint32_t local = _Py_atomic_load_uint32_relaxed(&op->ob_ref_local);
    uint32_t new_local = local + 1;
    if (new_local == 0) {
        _Py_INCREF_IMMORTAL_STAT_INC();
        // local is equal to _Py_IMMORTAL_REFCNT_LOCAL: do nothing
        return;
    }
    if (_Py_IsOwnedByCurrentThread(op)) {
        _Py_atomic_store_uint32_relaxed(&op->ob_ref_local, new_local);
    }
    else {
        _Py_atomic_add_ssize(&op->ob_ref_shared, (1 << _Py_REF_SHARED_SHIFT));
    }
#elif SIZEOF_VOID_P > 4
    uint32_t cur_refcnt = op->ob_refcnt;
    if (cur_refcnt >= _Py_IMMORTAL_INITIAL_REFCNT) {
        // the object is immortal
        _Py_INCREF_IMMORTAL_STAT_INC();
        return;
    }
    op->ob_refcnt = cur_refcnt + 1;
#else
    if (_Py_IsImmortal(op)) {
        _Py_INCREF_IMMORTAL_STAT_INC();
        return;
    }
    op->ob_refcnt++;
#endif
    _Py_INCREF_STAT_INC();
#ifdef Py_REF_DEBUG
    // Don't count the incref if the object is immortal.
    if (!_Py_IsImmortal(op)) {
        _Py_INCREF_IncRefTotal();
    }
#endif
#endif
}
#if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
#  define Py_INCREF(op) Py_INCREF(_PyObject_CAST(op))
#endif

#if !defined(Py_LIMITED_API)
#if defined(Py_GIL_DISABLED)
// Implements Py_DECREF on objects not owned by the current thread.
PyAPI_FUNC(void) _Py_DecRefShared(PyObject *);
PyAPI_FUNC(void) _Py_DecRefSharedDebug(PyObject *, const char *, int);

// Called from Py_DECREF by the owning thread when the local refcount reaches
// zero. The call will deallocate the object if the shared refcount is also
// zero. Otherwise, the thread gives up ownership and merges the reference
// count fields.
PyAPI_FUNC(void) _Py_MergeZeroLocalRefcount(PyObject *);
#endif  // Py_GIL_DISABLED
#endif  // Py_LIMITED_API

#if (defined(Py_LIMITED_API) && (Py_LIMITED_API+0 >= 0x030c0000 || defined(Py_REF_DEBUG))) \
    || defined(_Py_OPAQUE_PYOBJECT)
// Stable ABI implements Py_DECREF() as a function call on limited C API
// version 3.12 and newer, abi3t, and on Python built in debug mode.
// _Py_DecRef() was added to Python 3.10.0a7, use Py_DecRef() on older versions.
// Py_DecRef() accepts NULL whereas _Py_DecRef() doesn't.
static inline void Py_DECREF(PyObject *op) {
#  if Py_LIMITED_API+0 >= 0x030a00A7
    _Py_DecRef(op);
#  else
    Py_DecRef(op);
#  endif
}
#define Py_DECREF(op) Py_DECREF(_PyObject_CAST(op))

#elif defined(Py_GIL_DISABLED) && defined(Py_REF_DEBUG)
static inline void Py_DECREF(const char *filename, int lineno, PyObject *op)
{
    uint32_t local = _Py_atomic_load_uint32_relaxed(&op->ob_ref_local);
    if (local == _Py_IMMORTAL_REFCNT_LOCAL) {
        _Py_DECREF_IMMORTAL_STAT_INC();
        return;
    }
    _Py_DECREF_STAT_INC();
    _Py_DECREF_DecRefTotal();
    if (_Py_IsOwnedByCurrentThread(op)) {
        if (local == 0) {
            _Py_NegativeRefcount(filename, lineno, op);
        }
        local--;
        _Py_atomic_store_uint32_relaxed(&op->ob_ref_local, local);
        if (local == 0) {
            _Py_MergeZeroLocalRefcount(op);
        }
    }
    else {
        _Py_DecRefSharedDebug(op, filename, lineno);
    }
}
#define Py_DECREF(op) Py_DECREF(__FILE__, __LINE__, _PyObject_CAST(op))

#elif defined(Py_GIL_DISABLED)
static inline void Py_DECREF(PyObject *op)
{
    uint32_t local = _Py_atomic_load_uint32_relaxed(&op->ob_ref_local);
    if (local == _Py_IMMORTAL_REFCNT_LOCAL) {
        _Py_DECREF_IMMORTAL_STAT_INC();
        return;
    }
    _Py_DECREF_STAT_INC();
    if (_Py_IsOwnedByCurrentThread(op)) {
        local--;
        _Py_atomic_store_uint32_relaxed(&op->ob_ref_local, local);
        if (local == 0) {
            _Py_MergeZeroLocalRefcount(op);
        }
    }
    else {
        _Py_DecRefShared(op);
    }
}
#define Py_DECREF(op) Py_DECREF(_PyObject_CAST(op))

#elif defined(Py_REF_DEBUG)

static inline void Py_DECREF(const char *filename, int lineno, PyObject *op)
{
#if SIZEOF_VOID_P > 4
    /* If an object has been freed, it will have a negative full refcnt
     * If it has not it been freed, will have a very large refcnt */
    if (op->ob_refcnt_full <= 0 || op->ob_refcnt > (((uint32_t)-1) - (1<<20))) {
#else
    if (op->ob_refcnt <= 0) {
#endif
        _Py_NegativeRefcount(filename, lineno, op);
    }
    if (_Py_IsImmortal(op)) {
        _Py_DECREF_IMMORTAL_STAT_INC();
        return;
    }
    _Py_DECREF_STAT_INC();
    _Py_DECREF_DecRefTotal();
    if (--op->ob_refcnt == 0) {
        _Py_Dealloc(op);
    }
}
#define Py_DECREF(op) Py_DECREF(__FILE__, __LINE__, _PyObject_CAST(op))

#else

static inline Py_ALWAYS_INLINE void Py_DECREF(PyObject *op)
{
    // Non-limited C API and limited C API for Python 3.9 and older access
    // directly PyObject.ob_refcnt.
    if (_Py_IsImmortal(op)) {
        _Py_DECREF_IMMORTAL_STAT_INC();
        return;
    }
    _Py_DECREF_STAT_INC();
    if (--op->ob_refcnt == 0) {
        _Py_Dealloc(op);
    }
}
#define Py_DECREF(op) Py_DECREF(_PyObject_CAST(op))
#endif


/* Safely decref `op` and set `op` to NULL, especially useful in tp_clear
 * and tp_dealloc implementations.
 *
 * Note that "the obvious" code can be deadly:
 *
 *     Py_XDECREF(op);
 *     op = NULL;
 *
 * Typically, `op` is something like self->containee, and `self` is done
 * using its `containee` member.  In the code sequence above, suppose
 * `containee` is non-NULL with a refcount of 1.  Its refcount falls to
 * 0 on the first line, which can trigger an arbitrary amount of code,
 * possibly including finalizers (like __del__ methods or weakref callbacks)
 * coded in Python, which in turn can release the GIL and allow other threads
 * to run, etc.  Such code may even invoke methods of `self` again, or cause
 * cyclic gc to trigger, but-- oops! --self->containee still points to the
 * object being torn down, and it may be in an insane state while being torn
 * down.  This has in fact been a rich historic source of miserable (rare &
 * hard-to-diagnose) segfaulting (and other) bugs.
 *
 * The safe way is:
 *
 *      Py_CLEAR(op);
 *
 * That arranges to set `op` to NULL _before_ decref'ing, so that any code
 * triggered as a side-effect of `op` getting torn down no longer believes
 * `op` points to a valid object.
 *
 * There are cases where it's safe to use the naive code, but they're brittle.
 * For example, if `op` points to a Python integer, you know that destroying
 * one of those can't cause problems -- but in part that relies on that
 * Python integers aren't currently weakly referencable.  Best practice is
 * to use Py_CLEAR() even if you can't think of a reason for why you need to.
 *
 * gh-98724: Use a temporary variable to only evaluate the macro argument once,
 * to avoid the duplication of side effects if the argument has side effects.
 *
 * gh-99701: If the PyObject* type is used with casting arguments to PyObject*,
 * the code can be miscompiled with strict aliasing because of type punning.
 * With strict aliasing, a compiler considers that two pointers of different
 * types cannot read or write the same memory which enables optimization
 * opportunities.
 *
 * If available, use _Py_TYPEOF() to use the 'op' type for temporary variables,
 * and so avoid type punning. Otherwise, use memcpy() which causes type erasure
 * and so prevents the compiler to reuse an old cached 'op' value after
 * Py_CLEAR().
 *
 * On C++11 and newer, use "auto". On MSVC, check also _MSVC_LANG since
 * __cplusplus is 199711L unless the /Zc:__cplusplus flag is used.
 */
#ifdef _Py_TYPEOF
#define Py_CLEAR(op) \
    do { \
        _Py_TYPEOF(&(op)) _tmp_op_ptr = &(op); \
        _Py_TYPEOF(op) _tmp_old_op = (*_tmp_op_ptr); \
        if (_tmp_old_op != _Py_NULL) { \
            *_tmp_op_ptr = _Py_NULL; \
            Py_DECREF(_tmp_old_op); \
        } \
    } while (0)
#elif defined(__cplusplus) && (__cplusplus >= 201103L ||  _MSVC_LANG >= 201103L)
#define Py_CLEAR(op) \
    do { \
        auto _tmp_op_ptr = &(op); \
        auto _tmp_old_op = (*_tmp_op_ptr); \
        if (_tmp_old_op != _Py_NULL) { \
            *_tmp_op_ptr = _Py_NULL; \
            Py_DECREF(_tmp_old_op); \
        } \
    } while (0)
#else
#define Py_CLEAR(op) \
    do { \
        PyObject **_tmp_op_ptr = _Py_CAST(PyObject**, &(op)); \
        PyObject *_tmp_old_op = (*_tmp_op_ptr); \
        if (_tmp_old_op != _Py_NULL) { \
            PyObject *_null_ptr = _Py_NULL; \
            memcpy(_tmp_op_ptr, &_null_ptr, sizeof(PyObject*)); \
            Py_DECREF(_tmp_old_op); \
        } \
    } while (0)
#endif


/* Safely decref `dst` and set `dst` to `src`.
 *
 * As in case of Py_CLEAR "the obvious" code can be deadly:
 *
 *     Py_DECREF(dst);
 *     dst = src;
 *
 * The safe way is:
 *
 *      Py_SETREF(dst, src);
 *
 * That arranges to set `dst` to `src` _before_ decref'ing, so that any code
 * triggered as a side-effect of `dst` getting torn down no longer believes
 * `dst` points to a valid object.
 *
 * Temporary variables are used to only evaluate macro arguments once and so
 * avoid the duplication of side effects. _Py_TYPEOF(), C++ auto, or memcpy()
 * is used to avoid a miscompilation caused by type punning. See Py_CLEAR()
 * comment for implementation details about type punning.
 *
 * The memcpy() implementation does not emit a compiler warning if 'src' has
 * not the same type than 'src': any pointer type is accepted for 'src'.
 */
#ifdef _Py_TYPEOF
#define Py_SETREF(dst, src) \
    do { \
        _Py_TYPEOF(&(dst)) _tmp_dst_ptr = &(dst); \
        _Py_TYPEOF(dst) _tmp_old_dst = (*_tmp_dst_ptr); \
        *_tmp_dst_ptr = (src); \
        Py_DECREF(_tmp_old_dst); \
    } while (0)
#elif defined(__cplusplus) && (__cplusplus >= 201103L ||  _MSVC_LANG >= 201103L)
#define Py_SETREF(dst, src) \
    do { \
        auto _tmp_dst_ptr = &(dst); \
        auto _tmp_old_dst = (*_tmp_dst_ptr); \
        *_tmp_dst_ptr = (src); \
        Py_DECREF(_tmp_old_dst); \
    } while (0)
#else
#define Py_SETREF(dst, src) \
    do { \
        PyObject **_tmp_dst_ptr = _Py_CAST(PyObject**, &(dst)); \
        PyObject *_tmp_old_dst = (*_tmp_dst_ptr); \
        PyObject *_tmp_src = _PyObject_CAST(src); \
        memcpy(_tmp_dst_ptr, &_tmp_src, sizeof(PyObject*)); \
        Py_DECREF(_tmp_old_dst); \
    } while (0)
#endif

/* Py_XSETREF() is a variant of Py_SETREF() that uses Py_XDECREF() instead of
 * Py_DECREF().
 */
#ifdef _Py_TYPEOF
#define Py_XSETREF(dst, src) \
    do { \
        _Py_TYPEOF(&(dst)) _tmp_dst_ptr = &(dst); \
        _Py_TYPEOF(dst) _tmp_old_dst = (*_tmp_dst_ptr); \
        *_tmp_dst_ptr = (src); \
        Py_XDECREF(_tmp_old_dst); \
    } while (0)
#elif defined(__cplusplus) && (__cplusplus >= 201103L ||  _MSVC_LANG >= 201103L)
#define Py_XSETREF(dst, src) \
    do { \
        auto _tmp_dst_ptr = &(dst); \
        auto _tmp_old_dst = (*_tmp_dst_ptr); \
        *_tmp_dst_ptr = (src); \
        Py_XDECREF(_tmp_old_dst); \
    } while (0)
#else
#define Py_XSETREF(dst, src) \
    do { \
        PyObject **_tmp_dst_ptr = _Py_CAST(PyObject**, &(dst)); \
        PyObject *_tmp_old_dst = (*_tmp_dst_ptr); \
        PyObject *_tmp_src = _PyObject_CAST(src); \
        memcpy(_tmp_dst_ptr, &_tmp_src, sizeof(PyObject*)); \
        Py_XDECREF(_tmp_old_dst); \
    } while (0)
#endif


/* Function to use in case the object pointer can be NULL: */
static inline void Py_XINCREF(PyObject *op)
{
    if (op != _Py_NULL) {
        Py_INCREF(op);
    }
}
#if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
#  define Py_XINCREF(op) Py_XINCREF(_PyObject_CAST(op))
#endif

static inline void Py_XDECREF(PyObject *op)
{
    if (op != _Py_NULL) {
        Py_DECREF(op);
    }
}
#if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
#  define Py_XDECREF(op) Py_XDECREF(_PyObject_CAST(op))
#endif

// Create a new strong reference to an object:
// increment the reference count of the object and return the object.
PyAPI_FUNC(PyObject*) Py_NewRef(PyObject *obj);

// Similar to Py_NewRef(), but the object can be NULL.
PyAPI_FUNC(PyObject*) Py_XNewRef(PyObject *obj);

static inline PyObject* _Py_NewRef(PyObject *obj)
{
    Py_INCREF(obj);
    return obj;
}

static inline PyObject* _Py_XNewRef(PyObject *obj)
{
    Py_XINCREF(obj);
    return obj;
}

// Py_NewRef() and Py_XNewRef() are exported as functions for the stable ABI.
// Names overridden with macros by static inline functions for best
// performances.
#if !defined(Py_LIMITED_API) || Py_LIMITED_API+0 < 0x030b0000
#  define Py_NewRef(obj) _Py_NewRef(_PyObject_CAST(obj))
#  define Py_XNewRef(obj) _Py_XNewRef(_PyObject_CAST(obj))
#else
#  define Py_NewRef(obj) _Py_NewRef(obj)
#  define Py_XNewRef(obj) _Py_XNewRef(obj)
#endif


#ifdef __cplusplus
}
#endif
#endif   // !_Py_REFCOUNT_H